my opinion?
Controlling EMI
Jack
Kitty Hines <[log in to unmask]>
Sent by: DesignerCouncil <[log in to unmask]>
03/23/2006 08:40 AM
Please respond to
"(Designers Council Forum)" <[log in to unmask]>; Please respond to
Kitty Hines <[log in to unmask]>
To
To
[log in to unmask]
cc
Subject
Re: [DC] Upcoming IPC workshop you can't miss!
Caterpillar: Confidential Green Retain Until: 04/22/2006 Retention
Category: G90 - General Matters/Administration
I would like opinions on this. I won't be able to attend all of these
workshops even though I'd like to. There is a Designers Symposium on
April 21st that will have 1 hour presentations from each of these same
presenters. If you could only attend one of the 4 events, which one do
you think would be more informative for an experienced Senior Designer
looking to gain more knowledge on these topics (Black Magic, Signal
Integrity, Controlling EMI).
Thanks in advance for your advice.
Kitty
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]]On Behalf Of Tina
Nerad
Sent: Wednesday, March 22, 2006 4:13 PM
To: [log in to unmask]
Subject: [DC] Upcoming IPC workshop you can't miss!
IPC - Association Connecting Electronics Industries is hosting 4
workshops in April. Don't miss the opportunity to further enhance your
knowledge regarding these topics:
Base Material Basics: Manufacture and Market
April 11, 2006 - Bannockburn, IL
www.ipc.org/calendar/2006/BaseMatl_0406/BaseMatl_4.06.htm
All grades of base materials used in printed boards from low-cost,
paper-based (FR-1) to high-speed/high-frequency PTFE will be analyzed in
this course. Specific attention will be given to base materials
compatible with lead free assembly.
The Black Magic of Layer Count Prediction in High Density Design
April 18, 2006 - Bannockburn, IL
www.ipc.org/calendar/2006/BlkMagic_406/BlkMag_0406.htm
Often designers are faced with the challenge of estimating how many
conductive layers a particular board design will require. This course
will provide the expertise needed to determine layer count for high
density design.
Designing With Your Thumbs
April 19, 2006 - Bannockburn, IL
www.ipc.org/calendar/2006/Desgnyourthumbs_406/DesgnYourThumbs_406.htm
Have you wished someone would compile a list of all the general rules
for laying out different kinds of boards? How about having a place to go
for all of the guidelines for routing, planes, stackup, high speed, EMI
and more? This course will provide general "rules of thumb" for the ways
things should be done and how to achieve successful board designs.
Signal Integrity Control in for High Speed Circuits
April 20, 2006 - Bannockburn, IL
http://www.ipc.org/calendar/2006/SigInt_0406/SigInt_0406.htm
<http://www.ipc.org/calendar/2006/SigInt_0406/SigInt_0406.htm>
This course is a compete introduction to the concepts needed in high
speed circuit and printed circuit design to ensure success with designs
utilizing today's and tomorrow's fast and ultra fast ICs. Don't miss
this opportunity to learn more about Signal Integrity Control in for
High Speed Circuits.
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
**This transmission may contain information that is privileged,
confidential and/or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein (including any reliance thereon) is STRICTLY PROHIBITED. If you
received this transmission in error, please immediately contact the sender
and destroy the material in its entirety, whether in electronic or hard
copy format. Thank you.**
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
