DESIGNERCOUNCIL Archives

August 2004

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
assistance req'd
From:
Billy Bharath <[log in to unmask]>
Reply To:
(Designers Council Forum)
Date:
Tue, 31 Aug 2004 12:33:10 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
I urgently need to manufacture 200 single sided flexible tail. using the
following material (Krempel) KCL 2-17/25 FR (roll no. 232/2/5/0475). The
finish MUST be bare copper with a coverlay in an area of choice.

Billy Bharath
"Research is the process of going up alleys to see if they are blind."
PRISM ..South Africa
e-mail          [log in to unmask]
This mail and/or its attachments are covered by Disclaimer found at link
below
http://www.prism.co.za/main.asp?ID=710&rootitemid=1
This e-mail is subject to an e-mail disclaimer. To read our e-mail
disclaimer notice, please go to:
http://www.prism.co.za/main.asp?ID=710&rootitemid=1

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2