I checked out the website and process sequence.
Try building 99% of the conventional MLBs boards consumed globally today economically competitive with this process....NO WAY!
I will watch for it at my local theater :)
Charles Cobb
[log in to unmask]
-----Original Message-----
From: Dean Stadem <[log in to unmask]>
To: '(Designers Council Forum)' <[log in to unmask]>; 'Charles Cobb' <[log in to unmask]>
Sent: Sat, Jun 14, 2014 10:15 am
Subject: RE: [DC] 3D Printer For Printed Circuit Board
Sorry, Charles, but it is already being done on a production scale. Check
out Verdant, as one example. http://www.verdantelectronics.com/process.php.
Joe Feldstadt has made some serious advances in this technology.
There are many companies, including Analog Technologies Corp who are
currently using laser-ablated additive processes for making very advanced
solar-powered arrays, etc., as well as 3D solid modeling.
Gotta get with modern times, folks. FR-4 will still stick around, but kind
of like outhouses at the cabin. Reflow ovens will go that way also. In 10
years they will both be obsolete.
I said it right here, June 14, 2014.
Dean Stadem
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Charles
Cobb
Sent: Saturday, June 14, 2014 7:24 AM
To: [log in to unmask]
Subject: Re: [DC] 3D Printer For Printed Circuit Board
Hi folks,
I have been involved in the bare board industry for 48 years this year and
seen a few serious attempts at replacing tradional manufacturing methods
including companies such as Photocircuits, Western Electric (ATT) and
MacDermid.
I am not one to discount innovation but for several reasons we will not see
an "additive" process replace conventional methods on a broad scale,
technologically or economically It is nice to dream however.
Regards,
Charles Cobb
[log in to unmask]
-----Original Message-----
From: Golemme, Stephen <[log in to unmask]>
To: DesignerCouncil <[log in to unmask]>
Sent: Fri, Jun 13, 2014 5:06 pm
Subject: Re: [DC] 3D Printer For Printed Circuit Board
Very interesting. Thank you for sharing!
Stephen Golemme
Manufacturing Engineer | Schilling Robotics
E: [log in to unmask] | P: +1 530.747.2578
This communication (and/or the documents accompanying it) may contain
confidential information belonging to the sender or intended recipient. The
information is intended solely for the use of the individual or entity named
above. If you are not the intended recipient, you are hereby notified that
any disclosure, copying, distribution, or the taking of any action in
reliance on the contents of this information is strictly prohibited. If you
receive this communication in error, please notify us immediately by
telephone to arrange for the return of the documents.
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks,
William
Sent: Friday, June 13, 2014 12:40 PM
To: [log in to unmask]
Subject: Re: [DC] 3D Printer For Printed Circuit Board
Interesting article(s) on the 3D printing industry and where they see it
going... what effects it will have on manufacturing and product
development...
https://urldefense.proofpoint.com/v1/url?u=http://www.pwc.com/us/en/industri
al-products/3d-printing.jhtml?WT.mc_id%3Dcs_us-hero-home_US-3DP&k=rYVT%2BQIb
ByDGfw04ADASxQ%3D%3D%0A&r=XdOoUany%2BnlN0bQTLCL5xCpdsYMEtPapzJ9xBUJjxkY%3D%0
A&m=JUIKZyTRgByNRUGQojGqWJIwXuq4Zmu4kAjWxLo68OE%3D%0A&s=22a60ee70597ee73d161
812f07a166b3690b1fe2d1033a9a7b950990a9d49cbe
William Brooks, CID+
Senior MTS (Contract)
2747 Loker Ave West
Carlsbad, CA 92010-6603
760-930-7212
Fax: 760.918.8332
Mobile: 760.216.0170
E-mail: [log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Pete
Sent: Friday, June 13, 2014 6:38 AM
To: [log in to unmask]
Subject: Re: [DC] 3D Printer For Printed Circuit Board
No doubt additive processes will replace the 100 year old etch process.
Someday.
People have tried for years. Metallized inks seem to be the stumbling
blocks.
We may be getting closer, with material advances like graphene.
Pete
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the
BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach
Sasamori at [log in to unmask] or 847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
____________________________________________________________________________
_
Scanned by IBM Email Security Management Services powered by MessageLabs.
For
more information please visit
https://urldefense.proofpoint.com/v1/url?u=http://www.ers.ibm.com/&k=rYVT%2B
QIbByDGfw04ADASxQ%3D%3D%0A&r=XdOoUany%2BnlN0bQTLCL5xCpdsYMEtPapzJ9xBUJjxkY%3
D%0A&m=JUIKZyTRgByNRUGQojGqWJIwXuq4Zmu4kAjWxLo68OE%3D%0A&s=65df10484cfdf65d8
96b16f53eda8068368d25658abfd62b16a078d45910d2f5
This email is intended only for the use of the party to which it is
addressed
and may contain information that is privileged, confidential, or protected
by
law. If you are not the intended recipient you are hereby notified that any
dissemination, copying or distribution of the email or its contents is
strictly
prohibited. If you have received this message in error, please notify us
immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of
inaccuracies as information could be intercepted, corrupted, lost,
destroyed,
arrive late or incomplete, or contain viruses. Therefore, we do not accept
responsibility for any errors or omissions that are present in this email,
or
any attachment, that have arisen as a result of e-mail transmission.
____________________________________________________________________________
_
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
