The following question is one that was provided by designers for
the basic level exam. It is NOT included in the final published
test and is for reference only. The topic is Transforming a
Schematic or logic Diagram.
 
      *************************************************************
     124  What are the characteristics of a connector with a type
          reference designator? 

     A. fixed 
     B. movable
     C. male pinned
     D. female pinned
               
               select the most correct answer
     ********************************************************
Previous QOD

     123  If analog circuits are restricted to the center of the
          board, what is the effect of placing a power supply in
          the connector zone, below the analog circuits? 

     B.   the heat from the power supply causes instability
          
Resource: IPC-T-50 Specific Terms; IPC-D-275 para 3.5.5, 3.5.6,
3.6; figure 3-11.
               
     *********************************************************
                    
Please send comments, constructive critique, or suggestions to Lisa
Williams at [log in to unmask] 

Dieter Bergman