At 10:49 AM 4/15/98 -0500, you wrote:
George:
SUPPORTED HOLE - A hole in a printed circuit board that has its inside
surfaces plated or otherwise reinforced.
UNSUPPORTED HOLE - A hole in a printed board that does not contain plating
or other type of conductive reinforcement.
Basically it's a plated through or non plated through hole. Typically the
unsupported holes can have a tighter tolerance because the plating is not a
variable in the equasion.
Dave.
>Greetings;
>Would someone with a copy of IPC-T-50 please tell me what the diff is
>between an unsupported hole and a supported hole?
>Thank you
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe: SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe: SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>
____________________________________
PCB Designs by Baldwin Tech.
(602) 812-9246 FAX (602) 812-9247
http://www.neta.com/~btech
____________________________________
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################