On the contrary!!
Our experience has shown us otherwise!
It all comes down to how you configure your systems so that the data
required from either package Transfers
successfully. If you Configure two different Systems differently you are
bound to have a few headaches and
no doubt you cannot translate all the Attributes From Visula to Cadstar
but if you do it right and are
working in Cadstar Predominately, you can set up your Visula Tool to be
Directly Compatible.
If you have further questions on how effective this may be a good place
to start is the Zuken Redac web
page and the ZRUG. They have one in Germany also!!!
Your Local Distributor should be able to assist you in these sort of
enquiries and I am sure they would
be pleased to demonstrate it. If your Customer is big user of Cadstar,
Zuken Redac will definitely look
after you and support you as they still consider this as supporting
their customers to whom you Supply a
service to. We also do this.
Below is the Zuken Redac web site and Contacts.
http://www.zuken.co.uk
Germany:Gerhard [log in to unmask]
Zuken-Redac Design-System GmbH
Airport Business Centre,
Am Soeldnermoos 17,
D-85399 Hallbergmoos,
Germany
Tel.: +49 89 607696 00
Fax.: +49 89 607696 01
Wolfgang Schenke wrote:
> To our expierence CADSTAR CADIF files can be read into VISULA, but VISULA
> CADIF files fails most of the time to be loaded into CADSTAR for Windows.
>
> This makes a lot of sense, because CADSTAR is more limited than VISULA and
> it is expected to upload but not to download.
>
> Wolfgang
>
> ----- Original Message -----
> From: Matthias Mansfeld <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, February 06, 1999 8:47 AM
> Subject: [DC] Compatiliity Cadstar - Visula?
>
> >Hello all,
> >
> >I would like to know good or bad experiences with the interfacing
> >between Zuken Redac's Cadstar and Visula. I'm currently evaluating
> >different CAD systems in the price cathegory of about 10k$..30k$, and
> >a good compatibility between the above mentioned systems would be an
> >argument pro Cadstar, because one of my bigger customers has Visula.
> >-----------------------------------------------
> >Matthias Mansfeld Elektronik
> >* Printed Circuit Board Design and Assembly
> >Am Langhoelzl 11, D-85540 Haar, GERMANY
> >Phone: +49-89-4620 0937, Fax: +49-89-4620 0938
> >E-Mail: [log in to unmask]
> >Internet: http://www.mansfeld-elektronik.de
> >
> >################################################################
> >DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> >################################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with following
> text in the body:
> >To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> >To unsubscribe: SIGNOFF DesignerCouncil
> >################################################################
> >Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
> for additional information.
> >For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> >################################################################
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
--
Regards,
David Muscat
MANAGER
CAD SERVICE BUREAU
Arqtek Design/AD Technological
///////////////////////////////////////////////////////////////////
"DESIGN WIZARDS OF AUSTRALIA" (tm)
"THE EMC DESIGN WIZARDS" (tm)
///////////////////////////////////////////////////////////////////
[log in to unmask]
http://www.arqtek.com (Coming Soon!)
ph +61-3-9521-8139
fax +61-3-9521-8130
mobile +61-419-244-466
!!!!THE WIZARDS OF OZ!!!!!
PRODUCTS & SERVICES:
Design:
PCB Design With Zuken Redac Visula High Performance tools.
PCB Design Benchmarking.
PCB Design with Protel.
Electronic Product Design.
Manufacturing Equipment:
LASER STENCILS.
NICKEL Electroformed STENCIL.
Smartsonic Ultrasonic Stencil Cleaners and Chemistry.
Training Software:
Learnsoft MultiMedia Training Software for Electronics Manufacturing.
Production Engineering:
Process/ Production Engineering Consultancy.
We Deliver Price, Performance, Quality and Service!
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
