DESIGNERCOUNCIL Archives

September 1999

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Just Curious....
From:
"<Tim Easterling>" <[log in to unmask]>
Reply To:
DesignerCouncil E-Mail Forum.
Date:
Thu, 30 Sep 1999 11:10:00 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (18 lines) 
Adam,
If your  board is very small and is going to be panelized
you may elect to move components to within 1mm of the edge
if you can provide adequate spacing on the sub panel
for the handling rails of the process equipment and depending
on how you separate the boards on the panel.



Tim Easterling
Cadd Manager Commercial Engineering
SCI Systems Inc.
8600 S. Memorial Parkway MS 200
Huntsville, Al. 35802
(256)882-4426 (ph)
(256)882-4700 x4426 (voicemail)
(256)882-4304 (fx)

ATOM RSS1 RSS2