Designing and Building a Board with Embedded Passive Components:

An Interactive Workshop Hosted by NAVSEA CRANE

April 24-25, 2007 - Crane, IN

Learn and experience how to design and fabricate embedded passives. In
this hands-on workshop participants will use a CAD workstation to design
a PCB with embedded passives and then build it. 

 

Information on current commercially available materials for resistors
and capacitors will be provided, including Design for Manufacture (DfM)
and related processes for incorporation into the PCB with emphasis on
(DfM) and test and trim of resistors.  The overview concludes with a
systematic rationale on how to proceed with component and material
selection. 

 

To register for this workshop, please cut and paste
www.ipc.org/EPCrane07 into your browser to download the registration
form.

 

 

 

 

 


---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------