Unless you are violating electrical clearance constraints, then it would
be less.

Ted T
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Bremer, Gary
Sent: Thursday, June 30, 2005 1:16 PM
To: [log in to unmask]
Subject: Re: [DC] Max lead protrusion

2.5 mm [0.0984 in]

Gary Bremer
Senior Manufacturing Engineer

Phone: 257-4430 extension 2170

-----Original Message-----
From: Jeff Cole [mailto:[log in to unmask]] 
Sent: Thursday, June 30, 2005 11:08 AM
To: [log in to unmask]
Subject: [DC] Max lead protrusion

Does anybody have a copy of the IPC-610-A specifying the max lead
protrusion (class 2) for a soldered component?
 
Jeff Cole
Sr. Staff Designer
18220 Butterfield Blvd.
Morgan Hill, CA 95037
 
Ph: 408.201.7476
Fx:  408.778-2411
 

The PROPRIETARY and CONFIDENTIAL data attached to this email represents
an electronic form of Alien Technology Corporation ("Alien") proprietary
and confidential Design Information. 

If the reader of this message is not the intended recipient, or the
employer or agent responsible for delivery of it to the intended
recipient, you are hereby notified that any dissemination, copying, or
use of this communication is neither intended or permissible. If you
have received this transmission in error, please immediately notify us
by telephone and immediately delete and destroy the original message and
any copies of the original message.

 

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

______________________________________________________________________

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------