I have a few questions regarding blind vias with controlled depth
drilling.  Is this a reliable process?  I have a board that requires
microvias for a BGA package that will be on the top of the board.  All
the digital parts are on the top and RF parts are on the bottom.  So, I
don't want vias coming all the way from the top to the bottom.  This
will be and 8 layer board and I only want vias to come from the top down
to Layer 2, 3 for signals, and layer 4 for digital power.  I am also
gonna need vias to come from the bottom layer up to layer  7 for signals
and layer 6 for analog power.  Layer 5 is a gnd plane.  Is this
manufacturable?  What is the best way to do this without having an
astronomical cost?  Any help is greatly appreciated.  Also, who can
manufacture these boards?
Thank You,
Kitty

Kitty Hines
SOPHIA Communications, Inc.
8330 S. Madison St., Ste. 15
Burr Ridge, IL  60521
(630) 323-6110 Ext. 336
(630) 323-5173 Fax
[log in to unmask]

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------