Charles Barker@I-O INC
12/02/97 11:19 AM

Hi Wayne,

You may have already recieved the info you are looking for. However, I
found that quite often, the IC maker will offer a suggested breakout
pattern in their data book. If the vendor you are using does not ahve it,
you might want to try looking at another vendor's databook.

Regards,

Charlie B.



Please respond to [log in to unmask]; Please respond to
      [log in to unmask]

To:   [log in to unmask]
cc:    (bcc: Charles Barker/IO-US)
Subject:  [DC] BGA's



Hello,
We are using a 144 pin micro BGA with a dimension of 12 x 12 MM. I am
trying to find a breakout pattern that will allow us to use inexpensive
technology to produce the board. If this is not practical then we are
thinking of going to a BGA socket.
Does any one have any suggestions for a break out pattern?
Does any one have the name of a supplier of BGA sockets?
Any and all help is appreciated!
Wayne Moltz

##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe:   SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################