All,


        We have a design that sits in a mechanical
housing that has crevices and milled out areas. Due
to this the standoffs are different heights and sizes.
There are of course mechanical tolerances with these.

My question is what is the IPC standard for pcb warpage
tolerances. My assembly department is telling me that
we don't meet these standards yet can't define what they
are.  

All help is appreciated. 

Brad Jaurique C.I.D.
Senior PCB Designer
Pelco
Office - (559)292-1981 ext. 2347
Cell - (559)940-3966
[log in to unmask]
Tell me and I forget;  Show me and I remember; Involve me and I
understand. 
================ 
Confidentiality Note: 
The information contained in this transmission is legally privileged and
confidential, intended only for the use of the individual or entity
named above. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution,
or copying of this communication is strictly prohibited. If you receive
this communication in error, please delete the message and notify us
immediately by telephone call to +1-559-292-1981. 
================




Confidentiality Notice:

The information contained in this transmission is legally privileged and confidential, intended only for the use of the individual(s) or entities named above.  This email and any files transmitted with it are the property of Pelco.  If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, retention, or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. 

If you receive this communication in error, please notify us immediately by telephone call to +1-559-292-1981 or forward the e-mail to [log in to unmask] and then permanently delete the e-mail and destroy all soft and hard copies of the message and any attachments. Thank you for your cooperation.

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------