Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Wed, 23 Jan 2002 14:43:31 -0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi All,
I am in the process of looking into a flex-rigid board design which should
consist of 2 small 4 layer Rigid PCB's joined by a flexible circuit . I have
not designed any flexible boards or hybrids before.
My questions are mainly about what I need to do in my Layout Tool (Pads
Power PCB) . The board I described above consists of 2 rigid and 1 flexible
board , does this mean I have 3 separate board outlines in my Layout tool ?,
or am I better off with 3 separate PCB files and 3 sets of gerber files and
then using an assembly drawing to show how they should all join-up
together ?
It looks like in Power PCB that I can only have 1 Board outline I can't have
one PCB file with 2 or more separate board outlines.
If anyone can give me a few pointers on my approach to laying out this board
especially anyone who may have used Power PCB for flex-rigid boards I would
appreciate any comments you may have .
Many Thanks
Paul Noonan
Design Engineer
Eurologic Systems Ltd
mailto:[log in to unmask]
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|