That rings a bell. A group here used to send dxf or iges of simple switch
boards done in a mechanical cad pkg. The boardshops they dealt with really
didn't appreciate it at all. Hard to know what was to be filled and not,
what line width was assumed (if any thought was given to it at all, etc.
They eventually refused to accept anything other than gerber.
The moral being that while the software ACCEPTS DXF or IGES input, that is
not a gaurantee that they'll interpret it as you intended it to be.
Communicate and check, if you must work this way.
-Chris
"Ryan, Ronald" <[log in to unmask]>
Sent by: DesignerCouncil <[log in to unmask]>
02/07/2007 01:22 PM
Please respond to
"(Designers Council Forum)" <[log in to unmask]>; Please respond to
"Ryan, Ronald" <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [DC] Freeware Layout Tools
Another Choice.....
If the Engineer is familiar with AutoCad, he should be able to lay it
out following some guidelines. Most Cam software (like CAM350), has a
DXF-IN capability. The only thing I would suggest, is that he very
carefully checks the Gerber verification files prior to fabrication.
Ron
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Charles Gervasi
Sent: Wednesday, February 07, 2007 12:27 PM
To: [log in to unmask]
Subject: Re: [DC] Freeware Layout Tools
I am interested in this question too. I briefly tried to use PCB123
until I got access to a machine with OrCAD PCB Designer (Allegro Lite).
PCB123 didn't seem bad, but I never finished a board with it.
My understanding, though, is that you cannot generate normal Gerber
artwork with free programs. It generates a proprietary format that only
the fab that makes the software accepts. They make their money at that
point. My impression was if you know you're not going to fab more than
a few boards, PCB123 is a good deal.
I like OrCAD PCB Designer, which include OrCAD Capture and "Allegro
Lite". I believe my company paid $6,000 for it. I really like Allegro.
I have heard good things about EagleCAD, which is much cheaper. I am
curious to hear if Allegro and PADS are really worth their high price
tags.
CJ
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Jack
Olson
Sent: Wednesday, February 07, 2007 10:53 AM
To: [log in to unmask]
Subject: [DC] Freeware Layout Tools
Greetings,
I have an engineer who wants to use something like ExpressPCB or PCB123
or FreePCB to design easy-cheesy test boards.
Does anyone have experience with any of these packages? best libraries?
hidden "gotchas"?
I hate to do a long evaluation process before he dives headfirst into
something, so I thought I'd ask ya...
Jack
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases > E-mail Archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
