Hello Designer Council Members,


The reason that I asked about ANSI Y32.2-1975 was because I was looking for
the correct Graphic Symbol for a SURFACE MOUNT FERRITE BEAD.  Such as found
at    http://www.murata.com/ninfo/nr0341e.html

In ANSI Y32.2-1975, there is a symbol for a FERRITE BEAD RING (15.18.1
general and 15.18.2 application with equivalent LC circuit.

Would these be correct for the above ferrite bead or is there another
symbol used?

When I first got into electronics, we called one Hertz one CPS.  So I was
thinking (I know, I shouldn't do that) that maybe there is a new symbol for
this ferrite bead.  After all, the first ferrite bead I came across was
about three-quarters of an inch in diameter with a 18AWG wire running
through it.

Thanks

Donald Kyle C.I.D.+

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------