LISTSERV - DESIGNERCOUNCIL Archives

DESIGNERCOUNCIL Archives

September 2013

DesignerCouncil@IPC.ORG

	LISTSERV Archives
	DESIGNERCOUNCIL Home
	DESIGNERCOUNCIL September 2013

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: DFM / DFT
From:	Pete <[log in to unmask]>
Reply To:	(Designers Council Forum)
Date:	Wed, 18 Sep 2013 08:40:39 -0500
Content-Type:	text/plain
Parts/Attachments:	text/plain (18 lines)

Krishna,

IPC standards don't really work that way.  There are material specification standards, design standards, test standards, etc....

This page has the standards grouped by discipline: https://portal.ipc.org/Association/Index.htm

Used together, they will give you guidelines to design for manufacturability and test.  Designing for EMI/EMC/SI is another discipline altogether.  You need to reach outside IPC documents for that.  There are many books written on the subject.  One suggestion to start is Doug Brooks' Signal Integrity Issues and Printed Circuit Board Design.  

Pete

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------

ATOM RSS1 RSS2

LISTSERV.IPC.ORG