LISTSERV - DESIGNERCOUNCIL Archives

DESIGNERCOUNCIL Archives

July 2002

DesignerCouncil@IPC.ORG

	LISTSERV Archives
	DESIGNERCOUNCIL Home
	DESIGNERCOUNCIL July 2002

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	TAPE AND REEL PART ORIENTATION
From:	"John D. Wheeler" <[log in to unmask]>
Reply To:	(Designers Council Forum)
Date:	Wed, 3 Jul 2002 09:01:07 -0500
Content-Type:	text/plain
Parts/Attachments:	text/plain (22 lines)

Does anyone specify on their electronic parts drawings orientation of parts
on tape and reel? Our assembly people have had some reels of parts from
different manufactures come in with a different orientation.
We could put EIA-481 on the drawing to try and hold the manufactures to a
consistent orientation. Then main problem we would have then is with diodes
or polarized capacitor. The specification references pin 1 for
orientation.  I don’t know of any agreed upon standard to what is pin 1 on
a diode or polarized capacitor. Does anyone have experience with this or
have a suggestion?

John Wheeler

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2

LISTSERV.IPC.ORG