Mr. Morgan
Your reply is offensive and is an unacceptable post to IPC's listserv. I ask that
you not make a post of this nature again.
_____________________________
David W. Bergman, CAE
Vice President of Technical Programs
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
847-790-5340
847-509-9798
[log in to unmask]
www.ipc.org
_____________________________
>>> "Morgan, Gary" <[log in to unmask]> 01/08/99 09:27AM >>>
*********It runs in the family. Those *********************************.
Before you know it they'll *********************************************......
> -----Original Message-----
> From: Jeff Seeger [SMTP:[log in to unmask]]
> Sent: Wednesday, January 06, 1999 12:54 PM
> To: [log in to unmask]
> Subject: [DC] Greater Boston IPC/DC Chapter Meeting, 12-Jan
>
> .
> Rigid-Flex Circuitry
>
> The Greater Boston Chapter of the IPC Designer's Council will
> hold its next meeting on Tuesday, Jan 12th at 6pm.
>
> Teledyne Electronic Technologies of Hudson NH, a rigid-flex
> PWB manufacturer, will be sending two presenters:
>
> Mike Collier, Applications Engineer, will present "Design
> and Manufacture of Rigid Flex Circuitry", including,
>
> - Advantages of Rigid/Flex
> - Design Rules and Considerations
> - Available Materials w/Properties Comparisons
> - Electrical and Mechanical requirements
>
> Jim Mahoney, Quick Turn Manager, will present "Quick
> Turn Prototyping of Rigid/Flex".
>
> This should be a very interesting realm, the possibilities
> presented by the Rigid/Flex world have always caught this
> designer's eye. When one adds up reduced component count,
> simplified assembly, and especially improved reliability
> (from reduced connector junctions) the uses for this tech-
> nology look compelling. Let's see what the experts have
> to say!
>
> Agenda:
>
> 6:00 pm, Arrivals and Pizza, $5 contribution
> 6:45 Jeff Seeger - Chapter Update
> 7:00 Mike Collier, Design and Mfg of Rigid/Flex
> 8:00 Jim Mahoney, Quick-turn Prototyping for Rigid/Flex
>
> Directions:
>
> Lockheed/Loral in Lexington MA. This facility is located off
> route 128 at the route 2A/Concord/Hanscom exit. Proceed West
> 200 yds, turn Left onto Forbes Road. The meeting is in the
> first building on the left (after the guard shack).
>
> Mission:
>
> Design is not called "do" for a reason. To design in today's
> PWB environment implies adding value while giving electronics
> a physically manifestable form. In order to add value one
> must have a full grasp of the issues and stakeholders, often
> helping to mediate compromises among those interest groups.
> The Greater Boston Chapter of the IPC Designer's Council is
> trying to bring those stakeholders, from every discipline,
> to show you their problems and solutions so you can add to
> your arsenal of knowledge.
>
> Your help and participation would be most welcome.
>
> Non members are welcome at the meetings for now, but expect
> some pressure to join... Non-members should RSVP please,
> reply/sender mailto: [log in to unmask]
>
> Thanks, regards, and Happy Y2K-1!
> --
>
> Jeff Seeger Applied CAD Knowledge Inc
> Chief Technical Officer Tyngsboro, MA 01879
> jseeger "at" appliedcad "dot" com 978 649 9800
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>
>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|