apologize to you all for cluttering up your mail boxes with this.
Apparently there was a mix up with my posting, so here is the corrected
version. Thank you.

I am in need of your help! Recently my company has decided to close
operations here, and consequently layoff or transfer everyone. If anyone
on this list has an opening for a board designer, or know of one, please
get in touch with me.

I am well versed in the process from schematic to finished board, as
well as assembly, testing, and integration of those boards. I started
work here 18 years ago as a technician. As a technician, I often used
tape and film to design circuit boards. Later I was involved in the
testing of those same boards. I have had experience in both the design
and the user end of things, and have gained a great deal of experience
from both. Later, when the company wished to set up a board design
group, I was chosen to form the core of the group. We began on Mentor
Graphics Board Station (version 7.0), then moved to PADS PowerPCB with
ViewLogic for schematic capture.

My resume is available on request. I hope you will consider my
application favorably,

James Sams

CAD Manager/Senior Board Designer
Alliant Techsystems, Inc.
401 Defense Hwy
Annapolis, MD 21401
Tel: (401) 266-1837
e-mail:[log in to unmask]

##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe:   SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################