If you are going to maximize your size your are going to need
to talk to your vendor.
A conservative approach is the 16 x 10.9 .
Most vendors need about a 1 inch border on the 18 x 24.
You need space to route to separate the two boards from the panel.
Route may be from .125 to .250 ( depends on your vendor ).
If you want to get close , use these numbers.
If you need to squeeze out that last 10 to 50 mils, talk to your vendor.
Tim Easterling
Cadd Manager Commercial Engineering
Technology Division
SCI Systems Inc.
(256)882-4426 (ph)
(256)882-4700 x4426 (voicemail)
(256)882-4305 (fx)
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################