Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Fri, 4 Jan 2008 12:15:11 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello,
I have a re-work question on an assembled PCB.
I have a BGA that requires having a trace added to the pad (that is in the second outside row) and routed out from under the device to pad that a hardwire can be soldered to.
I want to save the current assemblies, and I am wonder if there is a process or a service that can remove the BGA and add a metallic substance that emulates a trace from the BGA pad. This trace would run over the soldermask of the board.
Michael Garcia
PCB Design Manager
Eagle Test Systems
**This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you.**
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|