Scott:
We use a number of potting materials. Some are epoxy based that make it a
little more difficult to get to the circuitry than a silicone-based material and
we ause silicon-based materials. The epoxy materials we use are manufactured by
Hysol (the same guys that make some of the soldermasks PCB shops use).
For more information, please e-mail a request to me off-line from this forum at
[log in to unmask] and I will give you more specifics regarding
manufacturers and part numbers. All of the materials we use are two-part
product, measured by volume (except on that is by weight).
-- Saul
****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
****************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************