Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Mon, 28 Mar 2005 13:18:33 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Look at IPC-2221A 8.1.8 (page 58) & Figure 8-4.
My regards,
Steve Smith, C.I.D.
Product Engineer
Staco Energy Products Co.
301 Gaddis Boulevard.
Dayton, OH 45403
Telephone: (937) 253-1191 Ext. 158
Fax: (937) 253-1723
E-mail: [log in to unmask]
Web Site: www.stacoenergy.com
& www.stacopower.com
> -----Original Message-----
> From: DesignerCouncil [mailto:[log in to unmask]]On
> Behalf Of Gary
> M. Koven
> Sent: Monday, March 28, 2005 1:11 PM
> To: [log in to unmask]
> Subject: [DC] Conductive pattern to mechanical hardware clearance
>
>
> Which IPC specification will show the minimum clearance from
> conductive
> pattern to mechanical hardware such as swage standoffs?
>
> Right now I have approximately 0.025in (0.635mm) from via pad edge to
> standoff lip edge, and want to make certain that distance will be
> sufficiently robust for production.
>
> The manufacturers' datasheets don't specify a recommended
> clearance, and
> neither do the IPC-222X series specs.
>
> Thanks,
>
> ======================
>
> Gary M. Koven
> Engineering Services Manager
> Dynazign, Inc.
> 806 Tyvola Road, Suite 100
> Charlotte, NC 28217
> P: 704.405.1234 x210
> F: 704.405.1402
> http://www.dynazign.com/
>
> --------------------------------------------------------------
> -------------------
> DesignerCouncil Mail List provided as a free service by IPC
> using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with
> following text in
> the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
> To temporarily stop/(restart) delivery of DesignerCouncil
> send: SET DesignerCouncil NOMAIL/(MAIL)
> Search previous postings at: www.ipc.org > On-Line Resources
> & Databases > E-mail Archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
> additional information, or contact Keach Sasamori at
> [log in to unmask] or 847-615-7100 ext.2815
> --------------------------------------------------------------
> -------------------
>
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|