Isn't that the truth! Can't even begin to count how many times I've seen P1 & J1 on the same board.
Cherie
Robert Wolfe <[log in to unmask]> wrote:
>Standards for standardizing the standard!
>
>I do Agree too Bill! But couldn't help myself.
>
>In all honesty most engineers & designers I have talked with have no
>idea how to use "J" & "P" properly.
>
>Bob Wolfe
>
>-----Original Message-----
>From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
>Brooks, William
>Sent: Tuesday, August 06, 2013 1:06 PM
>To: [log in to unmask]
>Subject: Re: [DC] Informal Poll
>
>DS is correct.
>The point of a standard is to have a common language that all use and
>communicate with.
>The more that use the standard, the easier it is to do business.
>Someday, there may be a worldwide adopted standard... but for now, this
>is the best standard we have.
>Rogues who don't like standards, will always be doing their own thing
>and answering questions about what language they are using, what units
>they are using, how they interpret their drawings, etc...
>I, for one, like standardization and its benefits to the whole
>industry.
>:)
>
>
>
>William Brooks, CID+
>Senior MTS (Contract)
>2747 Loker Ave West
>Carlsbad, CA 92010-6603
>760-930-7212
>Fax: 760.918.8332
>Mobile: 760.216.0170
>E-mail: [log in to unmask]
>
>
>
>-----Original Message-----
>From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
>[log in to unmask]
>Sent: Tuesday, August 06, 2013 9:27 AM
>To: [log in to unmask]
>Subject: Re: [DC] Informal Poll
>
>According to the ANSI list of ref des's, a "light-emiting solid-state
>device" should be a DS. A ref des is not supposed to be an
>abbreviation of the component type, but a distinct, short,
>representation of that component type.
>
>I know that all of us use what we've learned through OJT or what the
>company standard is. When there is no company standard or that
>standard conflicts with good communication, I go to the ANSI standard.
>It is a more accepted & known world wide.
>
>Cherie Litson
>IPC CIT
>
>
>In a message dated 8/5/2013 12:34:38 A.M. Pacific Daylight Time,
>[log in to unmask] writes:
>
>I use LD
>
>-----Original Message-----
>From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
>Jack Olson
>Sent: 01 August 2013 16:34
>To: [log in to unmask]
>Subject: [DC] Informal Poll
>
>Just out of curiosity, what Reference Designator (or "Class
>Designation Letter", for you purists!) are you using for an *LED*?
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud
>service.
>For more information please contact helpdesk at x2960 or
>[log in to unmask]
>______________________________________________________________________
>
>----------------------------------------------------------------------------
>-----
>DesignerCouncil Mail List provided as a free service by IPC using
>LISTSERV
>16.0.
>To unsubscribe, send a message to [log in to unmask] with following text
>in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of DesignerCouncil send: SET
>DesignerCouncil NOMAIL/(MAIL) For additional information, or contact
>Keach
>Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>----------------------------------------------------------------------------
>-----
>********************************************************
>
>The information transmitted is intended only for the person or entity
>to
>which it is addressed and may contain confidential and/or privileged
>material. If you are not the addressee, any disclosure, reproduction,
>copying, distribution, or other dissemination or use of this
>communication
> is
>strictly prohibited. If you have received this transmission in
>error please notify the sender immediately and then delete this
>e-mail.
>E-mail transmission cannot be guaranteed to be secure or error free as
>information could be intercepted, corrupted lost, destroyed, arrive
>late or
>incomplete, or contain viruses.
>The sender therefore does not accept liability for any errors or
>omissions
>in the contents of this message which arise as a result of e-mail
>transmission. If verification is required please request a hard copy
>version.
>
>********************************************************
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud
>service.
>For more information please contact helpdesk at x2960 or
>[log in to unmask]
>______________________________________________________________________
>
>----------------------------------------------------------------------------
>-----
>DesignerCouncil Mail List provided as a free service by IPC using
>LISTSERV
>16.0.
>To unsubscribe, send a message to [log in to unmask] with following text
>in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of DesignerCouncil send: SET
>DesignerCouncil NOMAIL/(MAIL)
>For additional information, or contact Keach Sasamori at
>[log in to unmask] or
>847-615-7100 ext.2815
>----------------------------------------------------------------------------
>-----
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud
>service.
>For more information please contact helpdesk at x2960 or
>[log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free service by IPC using
>LISTSERV 16.0.
>To unsubscribe, send a message to [log in to unmask] with following text
>in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of DesignerCouncil send: SET
>DesignerCouncil NOMAIL/(MAIL)
>For additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
>
>_____________________________________________________________________________
>Scanned by IBM Email Security Management Services powered by
>MessageLabs. For more information please visit
>http://cp.mcafee.com/d/FZsS76QmhPXRTDD4PtPr2rXX3XZPr2rXX3VEVjdI9LLIfLFCQrEKefL8L9CUCaDK-2yIBr4SOEDOVIH9mNdIG9YKrZZ1d6Wr_nVMQsEFTvWZOWqaoXzhOqejhPsQsFYJteOaaJQT-l3PWApmU6CQjq9K_9TLuZXTLsTsS02-deAglVsTkN3UBQfF8z3USGT2QzMl9qT00jqbb3bxI5-Aq83iS72hFtd40r1SIltfd40mGuurKrEw1XSE0H
>
>This email is intended only for the use of the party to which it is
>addressed and may contain information that is privileged, confidential,
>or protected by law. If you are not the intended recipient you are
>hereby notified that any dissemination, copying or distribution of the
>email or its contents is strictly prohibited. If you have received
>this message in error, please notify us immediately, by replying to the
>message and deleting it from your computer.
>
>WARNING: Internet communications are not assured to be secure or clear
>of inaccuracies as information could be intercepted, corrupted, lost,
>destroyed, arrive late or incomplete, or contain viruses. Therefore,
>we do not accept responsibility for any errors or omissions that are
>present in this email, or any attachment, that have arisen as a result
>of e-mail transmission.
>_____________________________________________________________________________
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud
>service.
>For more information please contact helpdesk at x2960 or
>[log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free service by IPC using
>LISTSERV 16.0.
>To unsubscribe, send a message to [log in to unmask] with following text
>in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of DesignerCouncil send: SET
>DesignerCouncil NOMAIL/(MAIL)
>For additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
>
>This e-mail and any files transmitted with it are the property of
>Kimchuk Inc. and is solely for the use of the individual or entity to
>whom this e-mail is addressed. If you are not one of the named
>recipients or otherwise have reason to be believe that you have
>received this message in error, please notify the sender and delete
>this message immediately from your computer. Any other use, retention,
>dissemination, forwarding, printing, or copying of this e-mail is
>strictly prohibited.
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud
>service.
>For more information please contact helpdesk at x2960 or
>[log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free service by IPC using
>LISTSERV 16.0.
>To unsubscribe, send a message to [log in to unmask] with following text
>in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of DesignerCouncil send: SET
>DesignerCouncil NOMAIL/(MAIL)
>For additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
