I second Wee's request to share Tony's notes on "BGA Routing Strategies"
Thanks
Jerry Johnson
****************************************************************************
Jerry Johnson
PC Design Process Engineer Telephone 719-590-2231
Agilent Technologies Fax 719-590-3978
1900 Garden of the Gods Road Email [log in to unmask]
Colorado Springs, CO 80901-2197 Unix [log in to unmask]
****************************************************************************
-----Original Message-----
From: Lum Wee Mei [mailto:[log in to unmask]]
Sent: Wednesday, June 12, 2002 7:36 PM
To: [log in to unmask]
Subject: Re: [DC] FW: Next meeting of the IPC Designers Council,San
Diego Chapter
Hi, there :
How I wish I am living in the same part of the world as you guys. You have
all the
opportunities to learn out there. Being in the other part of the world, it
is not possible for
me to attend this wonderful forum.
If possible, I would appreciate Tony to share the notes on "BGA Routing
Strategies" with me.
Best regards
Wee Mei Lum
Associate Engineer
DSO National Laboratories
"Brooks,Bill" wrote:
> > Meeting Notice - Meeting Notice - Meeting Notice - Meeting Notice -
> > Meeting Notice
> >
> > The next meeting of the IPC Designers Council, San Diego Chapter will be
> > held at the NEW Facilities of Overland Data, San Diego, CA. at 6:00PM on
> > Tuesday, June 25th, 2002. Entrance to the building is in the central
> > breezeway area under the stairs. A member will be monitoring the door to
> > help guide guests in to the conference room and food court areas.
> >
> > Our Guest Speaker will be Tony Shoot of TYCO Electronics PCB Group on
"BGA
> > Routing Strategies"
> > Mr. Tony Shoot is the Sr. Applications Engineer at Tyco Printed Circuit
> > Group, West Coast Operations. Tony has 21 years experience in the
Printed
> > Circuit Board Manufacturing Industry.
> > A brief description of what Tony will be covering follows:
> >
> > "The initial focus is on routing a 1mm (.039), 1849 I/O count BGA. The
> > fundamentals are then applied to .8, .75 and .5 mm BGA. With this
> > information, and the steps we teach, an engineer should be able to look
at
> > a part, determine preliminary layer count needed to route, and whether
the
> > need for blind, buried, micro vias or conventional technology would
> > apply."
> >
> > The date: Tuesday, June 25th, 2002 @ 6:00PM @ Overland Data in San
Diego,
> > CA
> >
> >
> > Meeting Agenda:
> > 6:00PM-6:30PM Dinner - (be prompt or you miss out!)
> > 6:30PM-6:45PM SDDC announcements, business, and introductions
> > 6:45PM-7:45PM - Tony Shoot - BGA Routing Strategies
> > 7:45PM-8:00PM Questions/answers - conclusion
> >
> > This event will be held at:
> > Overland Data
> > 4820 Overland Avenue
> > San Diego, California 92123
> > 1-800-729-8725
> > 1-858-571-5555
> >
> > Directions:
> > From Los Angeles:
> > From the 5 Fwy south, take the 805 Fwy South exit on the left.
> > Approximately 6 miles later, exit at the Clairemont Mesa Blvd.
> > West/Clairemont Mesa Blvd. East exit. Go East. Turn right onto
> > Clairemont Mesa Blvd. Turn right onto Overland Avenue. Overland
> > Data is located on the right side of Overland Avenue.
> >
> > From the Border on I-5 North:
> > From the 5 Fwy North, take the 15 Fwy North exit towards
> > Riverside for approx. 3 miles. Then take the 805 Fwy North exit
> > towards Los Angeles. Turn a slight left at the intersection of
> > I-8 East/I-8 West ramp to stay on the 805 Fwy North. Take the
> > 163 Fwy North towards Escondido. Exit at the Clairemont Mesa
> > Blvd. West/Clairemont Mesa Blvd. East exit. Go East. Keep right
> > at the fork in the ramp. Turn right onto Clairemont Mesa Blvd.
> > Turn right onto Overland Avenue. Overland Data is located on
> > the right side of Overland Avenue.
> >
> > From I-15 going South:
> > Take the Clairemont Mesa Blvd. exit and turn right onto
> > Clairemont Mesa Blvd. Turn left onto Overland Avenue. Overland Data is
> > located on the right side of Overland Avenue.
> >
> > Important!!!! - RSVP to [log in to unmask] prior to Monday, June
> > 24th, 2002.
> > * Dinner will be served!! @ 6:00PM *
> > We need to get your RSVP to plan on food and seating.
> >
> > IPC Designers Council Members will be admitted free of charge,
Non-Members
> > will be asked to contribute a $5.00 donation at the door. Contributors
> > will get a $5.00 discount applied to their membership should they decide
> > to join the IPC Designers Council at the event.
> > For the HTML version of this announcement please visit
> > http://www.ipc.org/SanDiego/ and click on "Events Schedule" and follow
> > the prompts.
> > More information about the IPC Designers Council is available on-line at
> > http://www.ipc.org/SanDiego/ or http://dc.ipc.org/
> >
> > Bill Brooks
> > PCB Design Engineer , C.I.D., C.I.I.
> > TITAN SYSTEMS CORPORATION
> > DATRON WORLD COMMUNICATIONS DIVISION
> > 3030 Enterprise Court,Vista, CA 92083
> > Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
> > Adjunct Instructor - PCB Design
> > Palomar College, 1440 West Mission Road
> > San Marcos, CA 92069-1487
> > http://www.palomar.edu/
> > Member of the IPC Designers Council
> > http://dc.ipc.org/
> > Executive Board
> > Steering Committee
> > Education Committee
> > San Diego Chapter of the IPC Designers Council Core Group
> > Board of Directors, Communications Officer and Webmaster
> > <http://www.ipc.org/SanDiego/>
> > <http://home.fda.net/bbrooks/pca/pca.htm
> >
> >
>
>
----------------------------------------------------------------------------
-----
> DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
> To set a vacation stop for delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
>
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
