In addition, we ask for their PCQRR number so we can look at their
samples in the database.


------------------------------
Karen McConnell
Senior Member Engineering Staff - Electronics / PWB
Lockheed Martin - Engineering Process Improvement Center
http://www.epic.lmco.com/


-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Susy
Webb
Sent: Friday, October 07, 2005 11:02 AM
To: [log in to unmask]
Subject: Re: [DC] qualify a vendor

Thanks to all who answered. I should have known this!!!
Susy

>
> From: "McGlaughlin, Jeffrey A" <[log in to unmask]>
> Date: 2005/10/07 Fri AM 08:48:29 CDT
> To: "(Designers Council Forum)" <[log in to unmask]>,
> [log in to unmask]
> Subject: RE: [DC] qualify a vendor
>
> We start with the IPC-1710 document
> (http://www.ipc.org/contentpage.asp?PageID=4.1.0.1) this captures a
> decent overview as to what the fabricators are capable of producing.
> Then most of the houses we deal with also provide a "technology
roadmap"
> showing their standard, acceptable, and advanced design
specifications.
> If we feel there is a fit for the fabricator in our design
> requirements, we then build a quote history with the fabricator before

> we place any orders.
>
> Hope this helps.
>
> Jeffrey McGlaughlin, CID
> Engineering Designer
> Battelle
> Columbus Ohio
> http://www.battelle.org
>
>
>
> -----Original Message-----
> From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
> Susy Webb
> Sent: Friday, October 07, 2005 9:34 AM
> To: [log in to unmask]
> Subject: [DC] qualify a vendor
>
> Does anyone have a set of questions, thoughts etc that they use to
> qualify a new fab vendor. One that they would be willing to share???
>
> Thanks,
> Susy
>
> ----------------------------------------------------------------------
> --
> ---------
> DesignerCouncil Mail List provided as a free service by IPC using
> LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
> following text in the BODY (NOT the subject field): SIGNOFF
> DesignerCouncil.
> To temporarily stop/(restart) delivery of DesignerCouncil send: SET
> DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org

> > On-Line Resources & Databases
> > E-mail Archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100
> ext.2815
> ----------------------------------------------------------------------
> --
> ---------
>

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases > E-mail Archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------