I have had similar problems with Cadence Allegro, the solution for it there
was to change the units to mils instead of mm. Also check for features
that are way outside your board outline, and also that the origin didn't
have too much of a negative number to it (basically place the origin in the
lower left, instead of right side.).
Good luck, hope it at least gives you some ideas.
From: Andre Demers <[log in to unmask]>
Reply-To: "(Designers Council Forum)" <[log in to unmask]>,
Andre Demers <[log in to unmask]>
To: [log in to unmask]
Subject: [DC] Problems with Pads-PCB script
Date: Sun, 27 May 2007 17:57:55 -0400
Hi,
I've been using the IPC-D-356A_Netlist_Extractor4_8.bas
file for some time now with no issues.
However, on the latest board I'm working on, I get a
message "(10062) overflow" and the script aborts.
I'm using Pads2005 Spac2 on a Windows 2000 environment,
but I've tried it on a PC running Windows XP with the same results.
Has anyone else had this problem ?
Does anyone know a work-around ?
Thanks in advance,
Regards,
Andre Demers, C.I.D.
Senior PCB Designer, Coordinator
cmrsummit Technologies
329 March Road, Suite 203
Kanata ON K2K 2E1
Canada
Telephone: 613.599.3881
Toll Free: 877.428.1229
Pager: 613.368.0506
Fax: 613.599.7889
[log in to unmask] <mailto:[log in to unmask]>
www.cmrsummit.com <http://www.cmrsummit.com/>
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
