LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


November 1999


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

回覆 : [TN] Dynamotion - Need Feed & Speed Info (1 message)
"RE: Finish NT Domain Conversion" (1 message)
(no need for) APOLOGY TO TECHNET (1 message)
0402 (3 messages)
1206, 805's phase out ?, Automation Algorithms (2 messages)
1812 capacitors on FR-4 (6 messages)
1812 capacitors on FR-4(Lead Free ) (1 message)
1812 caps on FR4 CTE mismatch (2 messages)
1812's on FR4 (3 messages)
3rd Party Test Houses (1 message)
6012B (1 message)
: Prepreg Tolerance (2 messages)
<No subject> (3 messages)
Adhesion of Conformal Coating (3 messages)
Ammoniacal Etchant (5 messages)
Analysis for acid content in ferric etchant (1 message)
Antimony (1 message)
Any archives for this reflector (4 messages)
Any Philips users out there? (1 message)
AOI equipment (9 messages)
APOLOGY TO TECHNET (5 messages)
APOLOGY TO TECHNET / out of touch (1 message)
Assembly With Gloves Or Finger Cots (6 messages)
Assy: pin placement (4 messages)
ASSY: RTV vs. Solder Joints (4 messages)
ASSY: SMD solder voids (5 messages)
Autorouters (3 messages)
AW: Re: Adhesion of Conformal Coating (1 message)
Banking agent for copper etching (2 messages)
Bar Solder... (15 messages)
Bellcore chemicals (1 message)
BGA drop test (1 message)
BGA rework guidelines (4 messages)
BGA Test Houses (5 messages)
BLIND VIA FAB: (6 messages)
Board Contamination (13 messages)
Bond Strength between layers (1 message)
Bonding PWB's to Centerline Heatsinks (2 messages)
Brian's displeasure (3 messages)
By-pass (1 message)
CGA attachment on BGA pattern (3 messages)
Chip on Board Technology (1 message)
cleaning assembled boards (3 messages)
componant replacement on board (1 message)
componant replacement on board (re-post) (1 message)
Component Bag sealing? (3 messages)
Component installation: adhesive mounting (3 messages)
component replacement on board (re-post) (1 message)
Conductive Epoxy (1 message)
Conductive Flux? (1 message)
Conformal Coating Removal (1 message)
Confromal Coating (2 messages)
Copper cleaning (3 messages)
Copper thickness for 25 amps (1 message)
Corona discharge (1 message)
Corrosion after Wave Flow Soldering (2 messages)
Cost of setting up SMT Line (8 messages)
Customized Electrovert Wavesolder Machine (5 messages)
Cutting through an inner trace (14 messages)
DATA LOGGERS (3 messages)
Dates and location of these conferences (1 message)
Design rules for automatic point soldering (2 messages)
DESIGNER GUIDE (3 messages)
DI Water Resistivity (2 messages)
Dielectric Measurements (2 messages)
DIP/SIP Masking (6 messages)
Dispensing of conductive adhesives for flipchip attach (3 messages)
Dispensing, nov-99 (2 messages)
Dispensing, nov-99 , DFA (1 message)
Dissolution of cured RTV (2 messages)
Dry Pack handling (1 message)
Dryfilm dye staining on laminate (2 messages)
Dust part 1 (1 message)
Dust part 2 (1 message)
Dynamotion - Need Feed & Speed Info (4 messages)
e-mail test (1 message)
ESD smock (4 messages)
Exposed Copper on Fabs (4 messages)
Eyewear (8 messages)
FAB: UL and/or Vendor Logos (4 messages)
Ferric etchant analysis (2 messages)
Ferric Etchant Analysis - thanks (5 messages)
Fiducials for manual adjustment of CSP solder stencils (1 message)
Flux Selection Criteria (3 messages)
FW: 6012B (1 message)
Fw: Charter audit (1 message)
Fw: Charter next visit to Stars (2 messages)
Fw: digital caliper pcb drawing (1 message)
Fw: EAI Visiting - agenda (1 message)
FW: Finish NT Domain Conversion (1 message)
Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req ... (1 message)
Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req... (1 message)
Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements (1 message)
Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESDRequirements (1 message)
FW: Help with Gold Plating (1 message)
Fw: Mail Delivery Problem (1 message)
Fw: Message ("Your message dated Tue, 16 Nov 1999 09:06:19...") (1 message)
Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:36...") (1 message)
Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:49...") (1 message)
Fw: Message ("Your message dated Tue, 16 Nov 1999 11:49:09...") (1 message)
Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements (1 message)
Fw: Re: Charter audit (1 message)
Fw: Re: Charter next visit to Stars (1 message)
Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ES... (1 message)
Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ESDRequirements (1 message)
FW: [TN] MIL-STDs to Industry Standards (2 messages)
FW: [TN] Slot Effects on impediance for Coax (1 message)
G -tek laminate (3 messages)
german drill manufacturer (1 message)
Gold plating specifications (9 messages)
good source for laboratory services (6 messages)
Handling / storage of PBGA packages (1 message)
HASL thickness spec help (6 messages)
Help with Gold Plating (1 message)
high pressure + low humidity = stress (3 messages)
high pressure + low humidity = stress !!! (2 messages)
Hole size Vs lead size (3 messages)
How to plate EN on Magnesium (3 messages)
IC package plastic molding compound (3 messages)
immersion tin as a surface finish (6 messages)
Impedance program (7 messages)
Info needed on mechanical properties of solder (1 message)
Information Needed (6 messages)
Inspection of repaired boards (3 messages)
Intrusive Reflow (15 messages)
Intrusive Reflow (one-more-time) (1 message)
IPC Documents (4 messages)
IPC-6012 Electrical Test Requirements (2 messages)
Job Opening: Sales Support/New Products Engineer (1 message)
Kapton (Tm) materials... (6 messages)
Ku-band waveguide gasket (7 messages)
Laminate requirement (3 messages)
Land Size Calculation (2 messages)
Larger Assemblies (1 message)
Lead Free EMA Meeting in Seattle (3 messages)
Lead Free Soldering SMTA Meeting this Thursday (1 message)
Lead issues (4 messages)
Lead Pull Strengths (1 message)
Long term storage of electronic components (6 messages)
Looking for (2 messages)
looking for a document NPS 25001 (2 messages)
Looking for file format converter (4 messages)
Looking for file format converter - followup (1 message)
Looking for list of prepreg and core thickness for FR-4 (8 messages)
Low Gold thickness-Bromine correction on XRF (3 messages)
LPISM (1 message)
LPISM Cleaning (3 messages)
Matrix Tray Packaging (3 messages)
Matrix Tray Packaging, there's a mo' betta page... (1 message)
Measurement Services (2 messages)
Meeting notice, Smoky Mountain Designers Council (1 message)
Micro-BGA Stuff...and patents... (1 message)
MICRO-SECTIONS (3 messages)
Microscope for PWB and PWBA inspection -Reply (1 message)
Mike Schumacher --Contact please (1 message)
Mil Spec for nickel and gold thickness (2 messages)
MIL SPEC QUESTION (6 messages)
MIL STDs Spreadsheet & posting files? (1 message)
MIL STDs to Industry Standards Spreadsheet (1 message)
MIL-P-13949 (4 messages)
MIL-STDs to Industry Standards (26 messages)
Mil/Ind Cross Reference List (1 message)
Multilayer PCB with re-inforced insulation (2 messages)
My apologies... (1 message)
Mydata (Thrird Party Materials) (2 messages)
Need of material testing labs (4 messages)
Need sample Gerber file (1 message)
New IPC Program for translation of articles from Japanese Technical Journals (1 message)
News on PCB - On-Line (1 message)
No Technical Content...Thanksgiving. (1 message)
Nonconforming process indicators (5 messages)
Out of touch (11 messages)
Pad design for wave soldered SMT components (2 messages)
Panelized Gerber Files... (9 messages)
Parts Quoting Service (1 message)
PC Pictures (6 messages)
PCB board material for high freq product (5 messages)
PCB design question (2 messages)
PCB shop auditing (1 message)
PCB vendor with leading edge technology (5 messages)
PCBA burning Test (1 message)
PCI Bus Dimensions (1 message)
Pin in hole stencil aperture (2 messages)
Plasma etch technical articles (1 message)
Power Supply PCB's (5 messages)
PQFP trays.... (1 message)
Pre-tinning and Solder plating (1 message)
Printed Wiring Conductor Spacing for Dielectric Breakdown (1 message)
Prior to PCB layout (1 message)
Problem of moisture on PCB (1 message)
Propagation delay compliance (1 message)
Pulse plating (13 messages)
PWB dielectric test method (1 message)
QFP Tray Packaging (9 messages)
QFP Tray Packaging...(deslexia attack) (1 message)
QUAD GUI database of component dimensions? (1 message)
Qualificationof Solder Joints (2 messages)
quality engineering (2 messages)
Quote Service? (1 message)
Re [TN] Tin vs. Tin/Lead solder (1 message)
reflow profile (1 message)
ReGlovesor FingerCots (4 messages)
ReInspection of Repairs (1 message)
required PWB co-planarity for BGAs (1 message)
Rising flame war. was: Re: [TN] Tarnish after resist str (1 message)
RSVP Smoky Mountain Designers Council meeting (1 message)
Second HAL and Warpage (1 message)
SIGNOFF TECHNET (1 message)
SIR (11 messages)
SMD ceramic cap on metal substrate (5 messages)
SMD shield damaging parts thru Reflow? (3 messages)
SMD solder voids (2 messages)
Solder Joint Reliability (1 message)
Solder Paste Dispensing (6 messages)
Solder paste height (2 messages)
Solderability Measurement (4 messages)
Solderability Procedure for White Tin (2 messages)
Soldering Stranded Wires (4 messages)
Soldermask Touchup (1 message)
Solvent for Silicones (1 message)
SPC (1 message)
SPC Information (6 messages)
SPC programs, how make the best use of the efforts.. (4 messages)
SPC software (9 messages)
Speaking of Adhesion of Conformal Coating (4 messages)
spiders and automation (1 message)
stacked CSP (3 messages)
Steve and Fred Day! (was [TN] "RE: Finish NT Domain Conversion" ) (1 message)
Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack)) (4 messages)
Subscribing (1 message)
substrate club (1 message)
Sulfuric Acid - Maximum allowed by Fire Code. (1 message)
SV: [TN] SPC software (1 message)
Tapered Voids (1 message)
Tarnish after resist stripping (14 messages)
Tarnish after resist stripping II (1 message)
Test (4 messages)
Test message (1 message)
Test, please ignore (1 message)
testing (1 message)
testing for our company (1 message)
testing my enrollment (1 message)
Thank you ......Wrist wraps...... (1 message)
Thanks for help: Ku-band waveguide gasket (1 message)
Thanks for the support (1 message)
Thanks: Ku-band waveguide gasket (1 message)
The Case of Corrosion after Wave Flow Soldering Affair (11 messages)
Tin vs. Tin/Lead solder (6 messages)
TN Dispensing of conductive adhesives for flipchip attac h (1 message)
Translation (5 messages)
Type of Circuitry (7 messages)
UL and/or Vendor Logos (1 message)
UV Conformal Coatings (2 messages)
Vacuum drying. (1 message)
vacuum packaging for moisture sensitive component (1 message)
Variance in a registered Land Pattern (1 message)
VECTRAN vs. PI (1 message)
Via inductance calc's? (1 message)
Video Vision System Recommendations Wanted (3 messages)
Voids after Wave-Soldering! (14 messages)
Voids After Wavesolder (3 messages)
Voids After Wavesoldering (1 message)
Voids at wave-solder (1 message)
Wave Solder Pallet Masking Guidelines (1 message)
Wave Soldering (8 messages)
What is BNY-2002 & IAW MIl-I-46058 (3 messages)
What MRP software for purchase in PCBA? (5 messages)
What software for assembly purchase order management? (1 message)
Where is Steve R. Anderson TRW? (1 message)
Which Component size is what - where is defacto list (1 message)
Which Component size is what - where is defacto listing? (6 messages)
White residue on SMT after vapor cleaning (3 messages)
Wobbler Hoax virus alert (3 messages)
WPS-80 Solder Mask (1 message)
Wrist wraps for seated operators (14 messages)
www.pcbworld.com (1 message)
X.400 Inter-Personal Notification (1 message)
Zinc based flux (4 messages)
[DC] [TN] Which Component size is what - where is defacto listing? (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

回覆 : [TN] Dynamotion - Need Feed & Speed Info

回覆 : [TN] Dynamotion - Need Feed & Speed Info

Howard Lin <[log in to unmask]>

Wed, 24 Nov 1999 11:53:43 +0800

79 lines

New Thread

Re:

joyce <[log in to unmask]>

Fri, 5 Nov 1999 19:37:32 -0500

50 lines

Re:

Darrel Therriault <[log in to unmask]>

Mon, 15 Nov 1999 10:57:09 -0800

88 lines

Re:

Houston, Terri <[log in to unmask]>

Mon, 15 Nov 1999 13:10:49 -0600

80 lines

Re:

Stephen R. Gregory <[log in to unmask]>

Tue, 16 Nov 1999 10:54:48 EST

39 lines

Re:

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 17 Nov 1999 08:47:00 +0100

80 lines

New Thread

"RE: Finish NT Domain Conversion"

"RE: Finish NT Domain Conversion"

Paul, Fred <[log in to unmask]>

Fri, 5 Nov 1999 14:39:41 -0800

30 lines

New Thread

(no need for) APOLOGY TO TECHNET

(no need for) APOLOGY TO TECHNET

Norman Robinson <[log in to unmask]>

Tue, 30 Nov 1999 12:50:22 +0000

77 lines

New Thread

0402

0402

Wm Cheng <[log in to unmask]>

Wed, 24 Nov 1999 09:33:46 GMT

32 lines

Re: 0402

Paul Klasek <[log in to unmask]>

Wed, 24 Nov 1999 16:06:25 +1100

74 lines

Re: 0402

Wm Cheng <[log in to unmask]>

Wed, 24 Nov 1999 14:18:26 GMT

87 lines

New Thread

1206, 805's phase out ?, Automation Algorithms

Re: 1206, 805's phase out ?, Automation Algorithms

Paul Klasek <[log in to unmask]>

Fri, 26 Nov 1999 09:48:10 +1100

121 lines

Re: 1206, 805's phase out ?, Automation Algorithms

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 29 Nov 1999 09:47:25 -0700

66 lines

New Thread

1812 capacitors on FR-4

1812 capacitors on FR-4

Wanner Bernhard <[log in to unmask]>

Wed, 10 Nov 1999 17:57:00 +0100

44 lines

Re: 1812 capacitors on FR-4

Charles Barker <[log in to unmask]>

Wed, 10 Nov 1999 13:24:40 -0600

99 lines

Re: 1812 capacitors on FR-4

Tom Burek <[log in to unmask]>

Wed, 10 Nov 1999 20:26:10 -0500

83 lines

Re: 1812 capacitors on FR-4

Werner Engelmaier <[log in to unmask]>

Wed, 10 Nov 1999 20:53:54 EST

40 lines

Re: 1812 capacitors on FR-4

Bogdan Gabi <[log in to unmask]>

Thu, 11 Nov 1999 10:42:15 +0200

97 lines

Re: 1812 capacitors on FR-4

David Whalley <[log in to unmask]>

Thu, 11 Nov 1999 10:28:23 +0000

58 lines

New Thread

1812 capacitors on FR-4(Lead Free )

Re: 1812 capacitors on FR-4(Lead Free )

Guenter Grossmann <[log in to unmask]>

Thu, 11 Nov 1999 11:15:19 +0100

42 lines

New Thread

1812 caps on FR4 CTE mismatch

1812 caps on FR4 CTE mismatch

Wolfe, Robert <[log in to unmask]>

Wed, 10 Nov 1999 13:13:38 -0500

110 lines

Re: 1812 caps on FR4 CTE mismatch

Dick Thompson/MKT/HQ/KEMET/US <[log in to unmask]>

Wed, 10 Nov 1999 13:50:03 -0500

197 lines

New Thread

1812's on FR4

1812's on FR4

Wolfe, Robert <[log in to unmask]>

Wed, 10 Nov 1999 12:11:49 -0500

69 lines

Re: 1812's on FR4

Tempea, Ioan <[log in to unmask]>

Wed, 10 Nov 1999 12:46:19 -0500

106 lines

Re: 1812's on FR4

Stephen R. Gregory <[log in to unmask]>

Wed, 10 Nov 1999 14:06:19 EST

62 lines

New Thread

3rd Party Test Houses

3rd Party Test Houses

Thomas J. Gulley <[log in to unmask]>

Tue, 2 Nov 1999 09:36:49 -0600

34 lines

New Thread

6012B

Re: 6012B

Edwards, Ted A (AZ75) <[log in to unmask]>

Fri, 12 Nov 1999 07:43:14 -0700

42 lines

New Thread

: Prepreg Tolerance

: Prepreg Tolerance

Poh Kong Hui <[log in to unmask]>

Fri, 12 Nov 1999 07:07:22 +0800

32 lines

Re: : Prepreg Tolerance

김달영 차장 전자 증평공장품질보증팀 <[log in to unmask]>

Thu, 18 Nov 1999 19:03:23 +0900

66 lines

New Thread

<No subject>

<No subject>

Hans Shin <[log in to unmask]>

Fri, 5 Nov 1999 14:16:51 -0800

29 lines

<No subject>

John Robins <[log in to unmask]>

Mon, 15 Nov 1999 10:20:16 PST

48 lines

<No subject>

Ron Luman <[log in to unmask]>

Tue, 16 Nov 1999 09:00:53 -0600

25 lines

New Thread

Adhesion of Conformal Coating

Adhesion of Conformal Coating

Julie Dixon <[log in to unmask]>

Thu, 18 Nov 1999 13:04:03 EST

31 lines

Re: Adhesion of Conformal Coating

Brian Ellis <[log in to unmask]>

Fri, 19 Nov 1999 09:48:53 +0200

65 lines

Re: Adhesion of Conformal Coating

Graham Naisbitt <[log in to unmask]>

Fri, 19 Nov 1999 11:03:43 -0000

107 lines

New Thread

Ammoniacal Etchant

Ammoniacal Etchant

Geoff Price <[log in to unmask]>

Wed, 24 Nov 1999 09:08:29 +0800

85 lines

Re: Ammoniacal Etchant

Paul Klasek <[log in to unmask]>

Wed, 24 Nov 1999 12:42:48 +1100

68 lines

Re: Ammoniacal Etchant

Paul Klasek <[log in to unmask]>

Wed, 24 Nov 1999 14:03:29 +1100

80 lines

Re: Ammoniacal Etchant

Bob Dube <[log in to unmask]>

Wed, 24 Nov 1999 07:58:24 -0500

118 lines

Re: Ammoniacal Etchant

Rudy Sedlak <[log in to unmask]>

Wed, 24 Nov 1999 11:13:55 EST

29 lines

New Thread

Analysis for acid content in ferric etchant

Analysis for acid content in ferric etchant

Richard Mark Mazzoli <[log in to unmask]>

Mon, 8 Nov 1999 13:09:31 EST

30 lines

New Thread

Antimony

Antimony

Guenter Grossmann <[log in to unmask]>

Fri, 12 Nov 1999 09:41:09 +0100

38 lines

New Thread

Any archives for this reflector

Any archives for this reflector

jim mccoy <[log in to unmask]>

Tue, 9 Nov 1999 14:18:22 -0800

34 lines

Re: Any archives for this reflector

Stephen R. Gregory <[log in to unmask]>

Tue, 9 Nov 1999 18:04:12 EST

39 lines

Re: Any archives for this reflector

Isaac Jeff <[log in to unmask]>

Wed, 10 Nov 1999 10:17:47 +1000

70 lines

Re: Any archives for this reflector

Gayatri Sardeshpande <[log in to unmask]>

Wed, 10 Nov 1999 10:55:08 -0600

61 lines

New Thread

Any Philips users out there?

Any Philips users out there?

Stephen R. Gregory <[log in to unmask]>

Fri, 5 Nov 1999 14:09:56 EST

60 lines

New Thread

AOI equipment

AOI equipment

Ed Cosper <[log in to unmask]>

Fri, 19 Nov 1999 15:21:49 -0500

137 lines

Re: AOI equipment

brian carlson <[log in to unmask]>

Fri, 19 Nov 1999 14:12:32 -0800

72 lines

Re: AOI equipment

brian carlson <[log in to unmask]>

Fri, 19 Nov 1999 14:19:32 -0800

67 lines

Re: AOI equipment

Frank Freitas <[log in to unmask]>

Sat, 20 Nov 1999 11:57:51 -0500

38 lines

Re: AOI equipment

Ed Cosper <[log in to unmask]>

Sat, 20 Nov 1999 13:03:14 -0500

85 lines

Re: AOI equipment

Evan Durant <[log in to unmask]>

Sun, 21 Nov 1999 11:12:09 -0800

151 lines

Re: AOI equipment

Huffman Connie Civ WRALC/LYPME <[log in to unmask]>

Mon, 22 Nov 1999 11:36:48 -0000

200 lines

Re: AOI equipment

Richard Desrosiers <[log in to unmask]>

Mon, 22 Nov 1999 08:24:48 -0800

144 lines

Re: AOI equipment

Evan Durant <[log in to unmask]>

Mon, 22 Nov 1999 09:12:22 -0800

241 lines

New Thread

APOLOGY TO TECHNET

APOLOGY TO TECHNET

Bev Christian <[log in to unmask]>

Sun, 28 Nov 1999 15:53:25 -0500

72 lines

Re: APOLOGY TO TECHNET

Brian Ellis <[log in to unmask]>

Mon, 29 Nov 1999 09:29:13 +0200

46 lines

Re: APOLOGY TO TECHNET

Dieselberg, Ron <[log in to unmask]>

Mon, 29 Nov 1999 08:22:44 -0500

43 lines

Re: APOLOGY TO TECHNET

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 29 Nov 1999 15:12:05 +0100

37 lines

Re: APOLOGY TO TECHNET

Richard Tilbrook <[log in to unmask]>

Tue, 30 Nov 1999 10:51:12 +0000

26 lines

New Thread

APOLOGY TO TECHNET / out of touch

Re: APOLOGY TO TECHNET / out of touch

Richard Tilbrook <[log in to unmask]>

Tue, 30 Nov 1999 11:01:03 +0000

33 lines

New Thread

Assembly With Gloves Or Finger Cots

Assembly With Gloves Or Finger Cots

Kane, Joseph <[log in to unmask]>

Wed, 24 Nov 1999 11:02:24 -0500

64 lines

Re: Assembly With Gloves Or Finger Cots

Hamilton, Richard CLE 4454 <[log in to unmask]>

Wed, 24 Nov 1999 09:59:23 -0700

106 lines

Re: Assembly With Gloves Or Finger Cots

Nancy Trumbull <[log in to unmask]>

Wed, 24 Nov 1999 12:17:18 -0500

42 lines

Re: Assembly With Gloves Or Finger Cots

Phil Bavaro <[log in to unmask]>

Wed, 24 Nov 1999 11:50:49 -0800

110 lines

Re: Assembly With Gloves Or Finger Cots

Kane, Joseph <[log in to unmask]>

Wed, 24 Nov 1999 15:55:30 -0500

165 lines

Re: Assembly With Gloves Or Finger Cots

Glenn Pelkey <[log in to unmask]>

Wed, 24 Nov 1999 15:41:40 PST

101 lines

New Thread

Assy: pin placement

Assy: pin placement

David Curtis <[log in to unmask]>

Mon, 8 Nov 1999 09:26:25 -0500

35 lines

Re: Assy: pin placement

Stephen R. Gregory <[log in to unmask]>

Mon, 8 Nov 1999 10:08:34 EST

49 lines

Re: Assy: pin placement

Thorup, John <[log in to unmask]>

Mon, 8 Nov 1999 07:38:20 -0800

65 lines

Re: Assy: pin placement

Christopher Murphy <[log in to unmask]>

Tue, 9 Nov 1999 09:01:43 +1300

70 lines

New Thread

ASSY: RTV vs. Solder Joints

ASSY: RTV vs. Solder Joints

Sherman Banks <[log in to unmask]>

Wed, 24 Nov 1999 16:36:54 -0800

43 lines

Re: ASSY: RTV vs. Solder Joints

Brian Ellis <[log in to unmask]>

Thu, 25 Nov 1999 10:43:11 +0200

85 lines

Re: ASSY: RTV vs. Solder Joints

Dieselberg, Ron <[log in to unmask]>

Mon, 29 Nov 1999 06:44:35 -0500

72 lines

Re: ASSY: RTV vs. Solder Joints

Parr, Aric <[log in to unmask]>

Mon, 29 Nov 1999 07:03:45 EST

131 lines

New Thread

ASSY: SMD solder voids

ASSY: SMD solder voids

Jeff Hempton <[log in to unmask]>

Thu, 11 Nov 1999 10:45:46 -0500

44 lines

Re: ASSY: SMD solder voids

joyce <[log in to unmask]>

Thu, 11 Nov 1999 18:23:23 -0500

68 lines

Re: ASSY: SMD solder voids

Guenter Grossmann <[log in to unmask]>

Fri, 12 Nov 1999 09:25:24 +0100

45 lines

Re: ASSY: SMD solder voids

Jon Moore <[log in to unmask]>

Fri, 12 Nov 1999 11:44:59 EST

33 lines

Re: ASSY: SMD solder voids

Jeff Hempton <[log in to unmask]>

Mon, 15 Nov 1999 13:19:21 -0500

93 lines

New Thread

Autorouters

Autorouters

Dale Joy <[log in to unmask]>

Wed, 10 Nov 1999 11:24:13 -0500

33 lines

Re: Autorouters

James Patten <[log in to unmask]>

Wed, 10 Nov 1999 08:56:39 -0800

61 lines

Autorouters

Wolfe, Robert <[log in to unmask]>

Wed, 10 Nov 1999 12:15:31 -0500

26 lines

New Thread

AW: Re: Adhesion of Conformal Coating

AW: Re: Adhesion of Conformal Coating

Wanner Bernhard <[log in to unmask]>

Fri, 19 Nov 1999 15:46:38 +0100

165 lines

New Thread

Banking agent for copper etching

Banking agent for copper etching

Pai Daniel MSM LAPO US <[log in to unmask]>

Mon, 29 Nov 1999 20:14:00 +0100

30 lines

Re: Banking agent for copper etching

Rudy Sedlak <[log in to unmask]>

Mon, 29 Nov 1999 15:21:11 EST

35 lines

New Thread

Bar Solder...

Bar Solder...

Stephen R. Gregory <[log in to unmask]>

Wed, 3 Nov 1999 14:10:47 EST

48 lines

Re: Bar Solder...

Thorup, John <[log in to unmask]>

Wed, 3 Nov 1999 11:32:15 -0800

105 lines

Re: Bar Solder...

Hamilton, Richard CLE 4454 <[log in to unmask]>

Wed, 3 Nov 1999 12:37:40 -0700

99 lines

Re: Bar Solder...

West, Jim <[log in to unmask]>

Wed, 3 Nov 1999 14:41:08 -0500

125 lines

Re: Bar Solder...

Paul Klasek <[log in to unmask]>

Thu, 4 Nov 1999 10:12:16 +1100

106 lines

Re: Bar Solder...

Richard Gisenia <[log in to unmask]>

Wed, 3 Nov 1999 20:13:15 -0800

103 lines

Re: Bar Solder...

[log in to unmask]

Thu, 4 Nov 1999 01:32:00 EST

29 lines

Re: Bar Solder...

Kelly M. Schriver <[log in to unmask]>

Thu, 4 Nov 1999 06:27:31 -0600

99 lines

Re: Bar Solder...

Gary Camac <[log in to unmask]>

Wed, 3 Nov 1999 20:52:10 -0600

83 lines

Re: Bar Solder...

Louis, Edwin @ CSE <[log in to unmask]>

Thu, 4 Nov 1999 10:07:10 -0500

130 lines

Re: Bar Solder...

Gary Camac <[log in to unmask]>

Wed, 3 Nov 1999 21:12:26 -0600

39 lines

Re: Bar Solder...

Alain Savard <[log in to unmask]>

Thu, 4 Nov 1999 10:29:40 -0500

69 lines

Re: Bar Solder...

<Joseph M. Webb> <[log in to unmask]>

Thu, 4 Nov 1999 10:44:35 -0500

193 lines

Re: Bar Solder...

[log in to unmask]

Thu, 4 Nov 1999 12:08:43 EST

35 lines

Re: Bar Solder...

Michael Fenner <[log in to unmask]>

Fri, 5 Nov 1999 08:58:42 -0000

120 lines

New Thread

Bellcore chemicals

Bellcore chemicals

Michael Simms <[log in to unmask]>

Fri, 19 Nov 1999 11:23:34 -0600

73 lines

New Thread

BGA drop test

BGA drop test

LI YUAN <[log in to unmask]>

Thu, 11 Nov 1999 12:56:40 -0700

35 lines

New Thread

BGA rework guidelines

BGA rework guidelines

Ajay Kumar <[log in to unmask]>

Tue, 30 Nov 1999 11:17:12 -0600

31 lines

Re: BGA rework guidelines

Taheri, Kamran <[log in to unmask]>

Tue, 30 Nov 1999 11:50:07 -0600

100 lines

Re: BGA rework guidelines

Jon Moore <[log in to unmask]>

Tue, 30 Nov 1999 21:45:45 EST

33 lines

Re: BGA rework guidelines

Jeff Ferry <[log in to unmask]>

Tue, 30 Nov 1999 20:08:09 -0800

71 lines

New Thread

BGA Test Houses

BGA Test Houses

[log in to unmask]

Wed, 17 Nov 1999 12:08:55 -0500

39 lines

Re: BGA Test Houses

Stephen R. Gregory <[log in to unmask]>

Wed, 17 Nov 1999 14:06:47 EST

55 lines

Re: BGA Test Houses

Teo Tijerina <[log in to unmask]>

Wed, 17 Nov 1999 13:47:48 -0700

94 lines

Re: BGA Test Houses

Stephen R. Gregory <[log in to unmask]>

Wed, 17 Nov 1999 16:15:23 EST

46 lines

Re: BGA Test Houses

Alderete, Michael <[log in to unmask]>

Wed, 17 Nov 1999 14:22:06 -0800

70 lines

New Thread

BLIND VIA FAB:

BLIND VIA FAB:

Brunker Ed <[log in to unmask]>

Thu, 25 Nov 1999 08:52:41 -0000

34 lines

Re: BLIND VIA FAB:

Ed Cosper <[log in to unmask]>

Mon, 29 Nov 1999 09:38:37 -0500

67 lines

Re: BLIND VIA FAB:

Houston, Terri <[log in to unmask]>

Mon, 29 Nov 1999 09:10:46 -0600

96 lines

Re: BLIND VIA FAB:

Brunker Ed <[log in to unmask]>

Tue, 30 Nov 1999 08:43:10 -0000

93 lines

Re: BLIND VIA FAB:

Ed Cosper <[log in to unmask]>

Tue, 30 Nov 1999 13:11:19 -0500

147 lines

Re: BLIND VIA FAB:

Parvez M.S. Patel <[log in to unmask]>

Tue, 30 Nov 1999 13:30:02 -0500

37 lines

New Thread

Board Contamination

Board Contamination

Ian Slater <[log in to unmask]>

Thu, 25 Nov 1999 09:44:26 -0700

55 lines

Re: Board Contamination

Collins, Graham <[log in to unmask]>

Thu, 25 Nov 1999 13:44:56 -0400

100 lines

Re: Board Contamination

Mike Moninger <[log in to unmask]>

Thu, 25 Nov 1999 12:53:27 EST

50 lines

Re: Board Contamination

Graham Naisbitt <[log in to unmask]>

Fri, 26 Nov 1999 13:26:16 -0000

112 lines

Re: Board Contamination

Peter Swanson <[log in to unmask]>

Fri, 26 Nov 1999 14:22:44 GMT

70 lines

Re: Board Contamination

Rudy Sedlak <[log in to unmask]>

Fri, 26 Nov 1999 10:16:59 EST

28 lines

Re: Board Contamination

Ian Slater <[log in to unmask]>

Fri, 26 Nov 1999 08:57:55 -0700

61 lines

Re: Board Contamination

Mike Moninger <[log in to unmask]>

Fri, 26 Nov 1999 11:12:37 EST

55 lines

Re: Board Contamination

joyce <[log in to unmask]>

Fri, 26 Nov 1999 22:20:45 -0500

78 lines

Re: Board Contamination

Mike Moninger <[log in to unmask]>

Sat, 27 Nov 1999 00:08:32 EST

47 lines

Re: Board Contamination

David Douthit <[log in to unmask]>

Sat, 27 Nov 1999 22:33:03 -0700

34 lines

Re: Board Contamination

Parr, Aric <[log in to unmask]>

Mon, 29 Nov 1999 07:20:53 EST

108 lines

Re: Board Contamination

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Mon, 29 Nov 1999 18:06:12 -0000

34 lines

New Thread

Bond Strength between layers

Bond Strength between layers

김달영 차장 전자 증평공장품질보증팀 <[log in to unmask]>

Fri, 19 Nov 1999 11:39:30 +0900

40 lines

New Thread

Bonding PWB's to Centerline Heatsinks

Bonding PWB's to Centerline Heatsinks

Michael Becker <[log in to unmask]>

Thu, 4 Nov 1999 15:30:31 -0500

41 lines

Re: Bonding PWB's to Centerline Heatsinks

Werner Engelmaier <[log in to unmask]>

Fri, 5 Nov 1999 09:33:28 EST

39 lines

New Thread

Brian's displeasure

Brian's displeasure

Richard Mark Mazzoli <[log in to unmask]>

Wed, 10 Nov 1999 11:53:51 EST

26 lines

Re: Brian's displeasure

Rudy Sedlak <[log in to unmask]>

Wed, 10 Nov 1999 12:09:56 EST

25 lines

Re: Brian's displeasure

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 10 Nov 1999 12:31:30 -0500

73 lines

New Thread

By-pass

By-pass

Graham Naisbitt <[log in to unmask]>

Tue, 30 Nov 1999 12:45:51 -0000

108 lines

New Thread

CGA attachment on BGA pattern

CGA attachment on BGA pattern

jong s kadesch <[log in to unmask]>

Tue, 2 Nov 1999 19:17:59 -0500

46 lines

Re: CGA attachment on BGA pattern

[log in to unmask]

Wed, 3 Nov 1999 10:18:04 -0500

70 lines

Re: CGA attachment on BGA pattern

Ghassan Abu-Hamdeh <[log in to unmask]>

Wed, 3 Nov 1999 08:09:59 PST

110 lines

New Thread

Chip on Board Technology

Chip on Board Technology

Teo Tijerina <[log in to unmask]>

Wed, 10 Nov 1999 13:32:37 -0700

32 lines

New Thread

cleaning assembled boards

Re: cleaning assembled boards

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 3 Nov 1999 14:47:40 +0100

49 lines

Re: cleaning assembled boards

Zajko, Robert A (PA62) <[log in to unmask]>

Wed, 3 Nov 1999 14:59:42 -0700

85 lines

Re: cleaning assembled boards

Stephen R. Gregory <[log in to unmask]>

Wed, 3 Nov 1999 22:15:08 EST

75 lines

New Thread

componant replacement on board

componant replacement on board

Jean-Francois Bissonnette <[log in to unmask]>

Thu, 25 Nov 1999 10:09:51 -0500

52 lines

New Thread

componant replacement on board (re-post)

componant replacement on board (re-post)

Jean-Francois Bissonnette <[log in to unmask]>

Fri, 26 Nov 1999 13:29:56 -0500

56 lines

New Thread

Component Bag sealing?

Component Bag sealing?

Rick Thompson <[log in to unmask]>

Tue, 9 Nov 1999 14:56:46 -0800

42 lines

Re: Component Bag sealing?

Michael Forrester <[log in to unmask]>

Wed, 10 Nov 1999 09:45:55 -0500

83 lines

Re: Component Bag sealing?

Phillips, Peter (NM75) <[log in to unmask]>

Mon, 15 Nov 1999 09:27:14 -0700

87 lines

New Thread

Component installation: adhesive mounting

Component installation: adhesive mounting

Jean-Francois Bissonnette <[log in to unmask]>

Wed, 24 Nov 1999 14:23:01 -0500

31 lines

Re: Component installation: adhesive mounting

Thorup, John <[log in to unmask]>

Wed, 24 Nov 1999 11:57:31 -0800

65 lines

Re: Component installation: adhesive mounting

Dieselberg, Ron <[log in to unmask]>

Mon, 29 Nov 1999 06:33:26 -0500

57 lines

New Thread

component replacement on board (re-post)

Re: component replacement on board (re-post)

Paul Klasek <[log in to unmask]>

Sat, 27 Nov 1999 09:17:30 +1100

100 lines

New Thread

Conductive Epoxy

Conductive Epoxy

Louis, Edwin @ CSE <[log in to unmask]>

Thu, 4 Nov 1999 14:14:12 -0500

25 lines

New Thread

Conductive Flux?

Re: Conductive Flux?

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Mon, 8 Nov 1999 08:52:11 -0500

55 lines

New Thread

Conformal Coating Removal

Conformal Coating Removal

Mauricio Castro <[log in to unmask]>

Tue, 9 Nov 1999 07:32:18 PST

49 lines

New Thread

Confromal Coating

Confromal Coating

Alberto Callo <[log in to unmask]>

Thu, 4 Nov 1999 11:45:34 -0800

56 lines

Re: Confromal Coating

Kenny Bloomquist <[log in to unmask]>

Thu, 4 Nov 1999 12:07:58 -0800

50 lines

New Thread

Copper cleaning

Copper cleaning

Scott B. Westheimer <[log in to unmask]>

Thu, 18 Nov 1999 08:43:37 +0800

31 lines

Re: Copper cleaning

Michael D. Doty <[log in to unmask]>

Wed, 17 Nov 1999 20:56:03 -0500

66 lines

Copper Cleaning

Julie Dixon <[log in to unmask]>

Thu, 18 Nov 1999 10:27:20 EST

34 lines

New Thread

Copper thickness for 25 amps

Re: Copper thickness for 25 amps

John C. Schultz <[log in to unmask]>

Tue, 2 Nov 1999 08:06:18 -0600

36 lines

New Thread

Corona discharge

Corona discharge

Louis Hart <[log in to unmask]>

Tue, 2 Nov 1999 15:04:52 -0500

39 lines

New Thread

Corrosion after Wave Flow Soldering

Corrosion after Wave Flow Soldering

Ramsey's <[log in to unmask]>

Thu, 4 Nov 1999 06:46:15 -0500

99 lines

Re: Corrosion after Wave Flow Soldering

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 4 Nov 1999 21:40:47 -0000

41 lines

New Thread

Cost of setting up SMT Line

Cost of setting up SMT Line

Katherine Henderson <[log in to unmask]>

Mon, 8 Nov 1999 21:15:37 -0000

66 lines

Re: Cost of setting up SMT Line

Phil Zarrow <[log in to unmask]>

Mon, 8 Nov 1999 16:43:46 EST

31 lines

Re: Cost of setting up SMT Line

Stephen R. Gregory <[log in to unmask]>

Mon, 8 Nov 1999 17:47:37 EST

132 lines

Re: Cost of setting up SMT Line

Brian Stumm <[log in to unmask]>

Mon, 8 Nov 1999 15:31:48 -0800

155 lines

Re: Cost of setting up SMT Line

Stephen R. Gregory <[log in to unmask]>

Mon, 8 Nov 1999 19:15:13 EST

51 lines

Re: Cost of setting up SMT Line

David Hipp <[log in to unmask]>

Tue, 9 Nov 1999 08:06:57 -0600

48 lines

Re: Cost of setting up SMT Line

rampinc <[log in to unmask]>

Tue, 9 Nov 1999 08:48:41 -0800

183 lines

Cost of setting up SMT Line

Katherine Henderson <[log in to unmask]>

Sun, 14 Nov 1999 10:53:21 -0000

56 lines

New Thread

Customized Electrovert Wavesolder Machine

Customized Electrovert Wavesolder Machine

Phil Bavaro <[log in to unmask]>

Mon, 29 Nov 1999 11:18:51 -0800

79 lines

Re: Customized Electrovert Wavesolder Machine

Lou Hart <[log in to unmask]>

Mon, 29 Nov 1999 16:04:02 -0500

117 lines

Re: Customized Electrovert Wavesolder Machine

John Harris <[log in to unmask]>

Tue, 30 Nov 1999 11:08:47 +1100

113 lines

Re: Customized Electrovert Wavesolder Machine

Gary Camac <[log in to unmask]>

Tue, 30 Nov 1999 09:47:48 -0600

46 lines

Re: Customized Electrovert Wavesolder Machine

Phil Bavaro <[log in to unmask]>

Tue, 30 Nov 1999 10:08:59 -0800

91 lines

New Thread

Cutting through an inner trace

Cutting through an inner trace

Matt Cirineo <[log in to unmask]>

Wed, 3 Nov 1999 14:27:54 -0800

33 lines

Re: Cutting through an inner trace

Andrew Kowalewski <[log in to unmask]>

Wed, 3 Nov 1999 16:50:07 -0600

62 lines

Re: Cutting through an inner trace

Adeodato Vigano <[log in to unmask]>

Wed, 3 Nov 1999 19:16:56 -0500

78 lines

Re: Cutting through an inner trace

Kelly M. Schriver <[log in to unmask]>

Thu, 4 Nov 1999 06:05:46 -0600

70 lines

Re: Cutting through an inner trace

Dieselberg, Ron <[log in to unmask]>

Thu, 4 Nov 1999 07:27:24 -0500

99 lines

Re: Cutting through an inner trace

Thomas DeSmit <[log in to unmask]>

Thu, 4 Nov 1999 07:13:08 -0600

80 lines

Re: Cutting through an inner trace

Thomas DeSmit <[log in to unmask]>

Thu, 4 Nov 1999 07:55:27 -0600

77 lines

Re: Cutting through an inner trace

[log in to unmask]

Thu, 4 Nov 1999 10:58:39 -0500

71 lines

Re: Cutting through an inner trace

Phil Crepeau <[log in to unmask]>

Thu, 4 Nov 1999 09:40:34 -0800

116 lines

Re: Cutting through an inner trace

Carey Pico <[log in to unmask]>

Thu, 4 Nov 1999 11:20:02 -0800

124 lines

Re: Cutting through an inner trace

Jeff Ferry <[log in to unmask]>

Thu, 4 Nov 1999 12:54:37 -0800

83 lines

Re: Cutting through an inner trace

Jon Moore <[log in to unmask]>

Tue, 9 Nov 1999 16:20:36 EST

40 lines

Re: Cutting through an inner trace

Kathie Lucas <[log in to unmask]>

Tue, 9 Nov 1999 15:41:40 -0700

80 lines

Re: Cutting through an inner trace

Stephen R. Gregory <[log in to unmask]>

Tue, 9 Nov 1999 18:19:01 EST

45 lines

New Thread

DATA LOGGERS

DATA LOGGERS

Brunker Ed <[log in to unmask]>

Tue, 30 Nov 1999 17:07:04 -0000

28 lines

Re: DATA LOGGERS

Sauer, Steven T. <[log in to unmask]>

Tue, 30 Nov 1999 12:26:01 -0500

33 lines

Re: DATA LOGGERS

Jon Moore <[log in to unmask]>

Tue, 30 Nov 1999 21:44:03 EST

40 lines

New Thread

Dates and location of these conferences

Dates and location of these conferences

tn <[log in to unmask]>

Fri, 19 Nov 1999 10:41:26 +0100

51 lines

New Thread

Design rules for automatic point soldering

Design rules for automatic point soldering

d. terstegge <[log in to unmask]>

Thu, 18 Nov 1999 10:33:51 +0100

34 lines

Re: Design rules for automatic point soldering

Finlay Buchan <[log in to unmask]>

Thu, 18 Nov 1999 10:21:57 -0000

66 lines

New Thread

DESIGNER GUIDE

DESIGNER GUIDE

chris johnston <[log in to unmask]>

Tue, 2 Nov 1999 07:48:09 +1100

143 lines

Re: DESIGNER GUIDE

Alain Savard <[log in to unmask]>

Tue, 2 Nov 1999 07:03:15 -0500

47 lines

Re: DESIGNER GUIDE

金鸿 <[log in to unmask]>

Wed, 10 Nov 1999 22:33:57 +0800

200 lines

New Thread

DI Water Resistivity

DI Water Resistivity

Armand Nitro <[log in to unmask]>

Thu, 25 Nov 1999 18:17:21 -0800

39 lines

Re: DI Water Resistivity

Brian Ellis <[log in to unmask]>

Fri, 26 Nov 1999 10:36:29 +0200

81 lines

New Thread

Dielectric Measurements

Dielectric Measurements

Charles E. McMahon <[log in to unmask]>

Mon, 22 Nov 1999 12:54:06 -0500

72 lines

Re: Dielectric Measurements

Alan Cochrane <[log in to unmask]>

Mon, 22 Nov 1999 21:31:04 -0800

52 lines

New Thread

DIP/SIP Masking

DIP/SIP Masking

McMonagle, Michael R. <[log in to unmask]>

Thu, 11 Nov 1999 11:41:13 -0600

40 lines

Re: DIP/SIP Masking

Stephen R. Gregory <[log in to unmask]>

Thu, 11 Nov 1999 14:23:19 EST

73 lines

Re: DIP/SIP Masking

rampinc <[log in to unmask]>

Thu, 11 Nov 1999 15:33:49 -0800

76 lines

Re: DIP/SIP Masking

McMonagle, Michael R. <[log in to unmask]>

Thu, 11 Nov 1999 16:18:21 -0600

132 lines

Re: DIP/SIP Masking

Peter Swanson <[log in to unmask]>

Fri, 12 Nov 1999 13:54:09 GMT

85 lines

Re: DIP/SIP Masking

rampinc <[log in to unmask]>

Fri, 12 Nov 1999 10:17:58 -0800

75 lines

New Thread

Dispensing of conductive adhesives for flipchip attach

Re: Dispensing of conductive adhesives for flipchip attach

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 24 Nov 1999 10:51:24 +0100

45 lines

Dispensing of conductive adhesives for flipchip attach

Creswick <[log in to unmask]>

Wed, 24 Nov 1999 08:54:03 -0500

50 lines

Re: Dispensing of conductive adhesives for flipchip attach

Paul Klasek <[log in to unmask]>

Fri, 26 Nov 1999 09:21:12 +1100

80 lines

New Thread

Dispensing, nov-99

Dispensing, nov-99

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 17 Nov 1999 15:01:17 +0100

42 lines

Re: Dispensing, nov-99

Brian Ellis <[log in to unmask]>

Thu, 18 Nov 1999 11:01:16 +0200

72 lines

New Thread

Dispensing, nov-99 , DFA

Re: Dispensing, nov-99 , DFA

Paul Klasek <[log in to unmask]>

Fri, 19 Nov 1999 10:09:30 +1100

155 lines

New Thread

Dissolution of cured RTV

Re: Dissolution of cured RTV

Rudy Sedlak <[log in to unmask]>

Fri, 5 Nov 1999 21:06:49 EST

35 lines

Re: Dissolution of cured RTV

[log in to unmask]

Mon, 8 Nov 1999 08:46:05 -0500

60 lines

New Thread

Dry Pack handling

Dry Pack handling

Kristian Fohlin-Svensson <[log in to unmask]>

Mon, 29 Nov 1999 08:18:35 +0100

39 lines

New Thread

Dryfilm dye staining on laminate

Dryfilm dye staining on laminate

Eric Masters <[log in to unmask]>

Wed, 24 Nov 1999 17:36:06 EST

36 lines

Re: Dryfilm dye staining on laminate

Paul Brown <[log in to unmask]>

Thu, 25 Nov 1999 19:21:21 -0000

63 lines

New Thread

Dust part 1

Dust part 1

David Douthit <[log in to unmask]>

Thu, 4 Nov 1999 18:38:34 -0700

150 lines

New Thread

Dust part 2

Dust part 2

David Douthit <[log in to unmask]>

Thu, 4 Nov 1999 18:43:55 -0700

147 lines

New Thread

Dynamotion - Need Feed & Speed Info

Dynamotion - Need Feed & Speed Info

John Parsons <[log in to unmask]>

Tue, 23 Nov 1999 14:51:52 -0800

37 lines

Re: Dynamotion - Need Feed & Speed Info

brian carlson <[log in to unmask]>

Tue, 23 Nov 1999 15:17:44 -0800

67 lines

Re: Dynamotion - Need Feed & Speed Info

John Parsons <[log in to unmask]>

Tue, 23 Nov 1999 15:44:33 -0800

46 lines

Re: Dynamotion - Need Feed & Speed Info

Marion A. Graybeal <[log in to unmask]>

Wed, 24 Nov 1999 09:41:40 -0500

71 lines

New Thread

e-mail test

e-mail test

Franklin <[log in to unmask]>

Tue, 16 Nov 1999 16:28:21 -0800

49 lines

New Thread

ESD smock

ESD smock

joyce <[log in to unmask]>

Tue, 23 Nov 1999 19:36:42 -0500

31 lines

Re: ESD smock

Cash, Alan <[log in to unmask]>

Wed, 24 Nov 1999 10:00:57 -0500

71 lines

Re: ESD smock

Dieselberg, Ron <[log in to unmask]>

Tue, 30 Nov 1999 07:58:58 -0500

98 lines

Re: ESD smock

Kenny Bloomquist <[log in to unmask]>

Tue, 30 Nov 1999 06:08:04 -0800

38 lines

New Thread

Exposed Copper on Fabs

Exposed Copper on Fabs

McMonagle, Michael R. <[log in to unmask]>

Tue, 2 Nov 1999 13:27:49 -0600

43 lines

Re: Exposed Copper on Fabs

Rudy Sedlak <[log in to unmask]>

Tue, 2 Nov 1999 15:32:55 EST

45 lines

Re: Exposed Copper on Fabs

Howieson, Rick <[log in to unmask]>

Tue, 2 Nov 1999 14:02:20 -0700

70 lines

Re: Exposed Copper on Fabs

Michael Newman <[log in to unmask]>

Wed, 3 Nov 1999 04:46:12 GMT

90 lines

New Thread

Eyewear

Eyewear

Alan Kreplick <[log in to unmask]>

Wed, 24 Nov 1999 14:18:23 -0500

33 lines

Re: Eyewear

Thorup, John <[log in to unmask]>

Wed, 24 Nov 1999 11:39:18 -0800

63 lines

Re: Eyewear

Eric Kalgren <[log in to unmask]>

Wed, 24 Nov 1999 12:59:01 -0700

95 lines

Re: Eyewear

Howieson, Rick <[log in to unmask]>

Wed, 24 Nov 1999 13:23:18 -0700

123 lines

Re: Eyewear

Kenny Bloomquist <[log in to unmask]>

Wed, 24 Nov 1999 12:32:16 -0800

56 lines

Re: Eyewear

Hooper Doug <[log in to unmask]>

Wed, 24 Nov 1999 15:28:00 -0500

128 lines

Re: Eyewear

Kelly M. Schriver <[log in to unmask]>

Sat, 27 Nov 1999 07:22:43 -0600

70 lines

Re: Eyewear

Phillips, Peter (NM75) <[log in to unmask]>

Mon, 29 Nov 1999 08:26:39 -0700

88 lines

New Thread

FAB: UL and/or Vendor Logos

FAB: UL and/or Vendor Logos

Jack Olson <[log in to unmask]>

Mon, 29 Nov 1999 13:22:02 -0800

34 lines

Re: FAB: UL and/or Vendor Logos

Ed Cosper <[log in to unmask]>

Mon, 29 Nov 1999 17:28:41 -0500

68 lines

Re: FAB: UL and/or Vendor Logos

Mark Ross <[log in to unmask]>

Mon, 29 Nov 1999 17:53:37 -0500

103 lines

Re: FAB: UL and/or Vendor Logos

Thorup, John <[log in to unmask]>

Mon, 29 Nov 1999 15:22:55 -0800

65 lines

New Thread

Ferric etchant analysis

Ferric etchant analysis

Richard Mark Mazzoli <[log in to unmask]>

Mon, 8 Nov 1999 10:35:37 EST

30 lines

Re: Ferric etchant analysis

Rudy Sedlak <[log in to unmask]>

Mon, 8 Nov 1999 14:29:57 EST

36 lines

New Thread

Ferric Etchant Analysis - thanks

Ferric Etchant Analysis - thanks

Richard Mark Mazzoli <[log in to unmask]>

Wed, 10 Nov 1999 09:00:39 EST

26 lines

Re: Ferric Etchant Analysis - thanks

Rudy Sedlak <[log in to unmask]>

Wed, 10 Nov 1999 09:51:42 EST

35 lines

Re: Ferric Etchant Analysis - thanks

Richard Mark Mazzoli <[log in to unmask]>

Wed, 10 Nov 1999 11:24:43 EST

29 lines

Re: Ferric Etchant Analysis - thanks

Brian Ellis <[log in to unmask]>

Wed, 10 Nov 1999 18:36:27 +0200

56 lines

Re: Ferric Etchant Analysis - thanks

Rudy Sedlak <[log in to unmask]>

Wed, 10 Nov 1999 12:09:22 EST

33 lines

New Thread

Fiducials for manual adjustment of CSP solder stencils

Fiducials for manual adjustment of CSP solder stencils

Matthias Mansfeld <[log in to unmask]>

Tue, 2 Nov 1999 14:46:57 +0100

50 lines

New Thread

Flux Selection Criteria

Flux Selection Criteria

Pai Daniel MSM LAPO US <[log in to unmask]>

Mon, 29 Nov 1999 20:14:00 +0100

31 lines

Re: Flux Selection Criteria

[log in to unmask]

Tue, 30 Nov 1999 07:26:01 EST

39 lines

Re: Flux Selection Criteria

[log in to unmask]

Tue, 30 Nov 1999 12:12:38 EST

38 lines

New Thread

FW: 6012B

FW: 6012B

Edwards, Ted A (AZ75) <[log in to unmask]>

Fri, 12 Nov 1999 08:05:06 -0700

56 lines

New Thread

Fw: Charter audit

Fw: Charter audit

gzgcec <[log in to unmask]>

Mon, 15 Nov 1999 16:58:42 +0800

57 lines

New Thread

Fw: Charter next visit to Stars

Fw: Charter next visit to Stars

gzgcec <[log in to unmask]>

Mon, 15 Nov 1999 16:59:08 +0800

52 lines

Fw: Charter next visit to Stars

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 09:04:07 +0800

84 lines

New Thread

Fw: digital caliper pcb drawing

Fw: digital caliper pcb drawing

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 11:48:49 +0800

199 lines

New Thread

Fw: EAI Visiting - agenda

Fw: EAI Visiting - agenda

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 11:48:36 +0800

159 lines

New Thread

FW: Finish NT Domain Conversion

FW: Finish NT Domain Conversion

Paul, Fred <[log in to unmask]>

Fri, 5 Nov 1999 14:25:50 -0800

45 lines

New Thread

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req ...

Re: Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req ...

Keel, Mike <[log in to unmask]>

Tue, 16 Nov 1999 16:36:40 -0800

64 lines

New Thread

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req...

Re: Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Req...

Stephen R. Gregory <[log in to unmask]>

Mon, 15 Nov 1999 22:52:11 EST

28 lines

New Thread

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 09:06:19 +0800

200 lines

New Thread

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESDRequirements

Fw: Fw: PCB Fabrication,Vendor Supplier Survey & ESDRequirements

gzgcec <[log in to unmask]>

Mon, 15 Nov 1999 17:00:12 +0800

209 lines

New Thread

FW: Help with Gold Plating

FW: Help with Gold Plating

Scott Lefebvre <[log in to unmask]>

Tue, 30 Nov 1999 08:16:47 -0800

77 lines

New Thread

Fw: Mail Delivery Problem

Fw: Mail Delivery Problem

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 13:24:46 +0800

34 lines

New Thread

Fw: Message ("Your message dated Tue, 16 Nov 1999 09:06:19...")

Fw: Message ("Your message dated Tue, 16 Nov 1999 09:06:19...")

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 13:24:03 +0800

35 lines

New Thread

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:36...")

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:36...")

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 13:23:11 +0800

33 lines

New Thread

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:49...")

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:48:49...")

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 13:22:48 +0800

35 lines

New Thread

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:49:09...")

Fw: Message ("Your message dated Tue, 16 Nov 1999 11:49:09...")

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 13:23:38 +0800

33 lines

New Thread

Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements

Fw: PCB Fabrication,Vendor Supplier Survey & ESD Requirements

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 09:05:47 +0800

174 lines

New Thread

Fw: Re: Charter audit

Fw: Re: Charter audit

gzgcec <[log in to unmask]>

Mon, 15 Nov 1999 16:59:22 +0800

64 lines

New Thread

Fw: Re: Charter next visit to Stars

Fw: Re: Charter next visit to Stars

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 11:49:09 +0800

102 lines

New Thread

Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ES...

Re: Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ES...

Stephen R. Gregory <[log in to unmask]>

Mon, 15 Nov 1999 20:36:11 EST

27 lines

New Thread

Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ESDRequirements

Fw: ZapCode PCB Fabrication,Vendor Supplier Survey & ESDRequirements

gzgcec <[log in to unmask]>

Tue, 16 Nov 1999 09:02:00 +0800

227 lines

New Thread

FW: [TN] MIL-STDs to Industry Standards

FW: [TN] MIL-STDs to Industry Standards

Kathie Lucas <[log in to unmask]>

Wed, 17 Nov 1999 10:26:46 -0700

140 lines

Re: FW: [TN] MIL-STDs to Industry Standards

Koens, Larry (Taytronics) <[log in to unmask]>

Wed, 17 Nov 1999 13:21:44 -0600

168 lines

New Thread

FW: [TN] Slot Effects on impediance for Coax

FW: [TN] Slot Effects on impediance for Coax

Bates, Barry L <[log in to unmask]>

Tue, 2 Nov 1999 17:56:36 -0000

59 lines

New Thread

G -tek laminate

G -tek laminate

GZ-MIS <[log in to unmask]>

Wed, 3 Nov 1999 20:31:07 +0800

29 lines

Re: G -tek laminate

Waters, Angela (GEP) <[log in to unmask]>

Wed, 3 Nov 1999 08:36:16 -0500

67 lines

Re: G -tek laminate

GZ-MIS <[log in to unmask]>

Thu, 4 Nov 1999 15:30:23 +0800

100 lines

New Thread

german drill manufacturer

Re: german drill manufacturer

Julian Coates <[log in to unmask]>

Mon, 1 Nov 1999 08:22:03 -0000

79 lines

New Thread

Gold plating specifications

Gold plating specifications

Scott Rebman <[log in to unmask]>

Tue, 23 Nov 1999 08:33:16 -0800

38 lines

Re: Gold plating specifications

Phil Crepeau <[log in to unmask]>

Tue, 23 Nov 1999 09:17:42 -0800

71 lines

Gold plating specifications

Creswick <[log in to unmask]>

Tue, 23 Nov 1999 18:06:53 -0500

33 lines

Re: Gold plating specifications

Paul Klasek <[log in to unmask]>

Wed, 24 Nov 1999 10:06:12 +1100

109 lines

Re: Gold plating specifications

Carey Pico <[log in to unmask]>

Thu, 25 Nov 1999 11:26:50 -0800

107 lines

Re: Gold plating specifications

Carey Pico <[log in to unmask]>

Thu, 25 Nov 1999 11:39:05 -0800

101 lines

Re: Gold plating specifications

Mordechai Holtzman <[log in to unmask]>

Mon, 29 Nov 1999 14:14:01 EST

33 lines

Re: Gold plating specifications

[log in to unmask]

Mon, 29 Nov 1999 14:51:39 EST

32 lines

Re: Gold plating specifications

Scott Rebman <[log in to unmask]>

Mon, 29 Nov 1999 12:52:41 -0800

107 lines

New Thread

good source for laboratory services

good source for laboratory services

Wade Oberle <[log in to unmask]>

Tue, 2 Nov 1999 14:37:20 -0600

33 lines

Re: good source for laboratory services

[log in to unmask]

Tue, 2 Nov 1999 16:40:04 EST

26 lines

Re: good source for laboratory services

Sauer, Steven T. <[log in to unmask]>

Tue, 2 Nov 1999 16:48:34 -0500

36 lines

Re: good source for laboratory services

Bill Davis <[log in to unmask]>

Tue, 2 Nov 1999 13:58:53 -0800

66 lines

Re: good source for laboratory services

Craig Hillman <[log in to unmask]>

Wed, 3 Nov 1999 05:00:00 EST

40 lines

Re: good source for laboratory services

Lourdes White <[log in to unmask]>

Wed, 3 Nov 1999 13:51:20 EST

32 lines

New Thread

Handling / storage of PBGA packages

Handling / storage of PBGA packages

Martin Christie <[log in to unmask]>

Fri, 26 Nov 1999 13:32:00 +0000

53 lines

New Thread

HASL thickness spec help

HASL thickness spec help

Tom Oliver <[log in to unmask]>

Tue, 2 Nov 1999 06:36:28 -0500

41 lines

Re: HASL thickness spec help

Franklin <[log in to unmask]>

Tue, 2 Nov 1999 07:24:38 -0600

219 lines

Re: HASL thickness spec help

Alain Savard <[log in to unmask]>

Tue, 2 Nov 1999 08:34:02 -0500

81 lines

Re: HASL thickness spec help

Vaughan, Ralph H <[log in to unmask]>

Tue, 2 Nov 1999 06:19:52 -0800

81 lines

Re: HASL thickness spec help

Franklin <[log in to unmask]>

Tue, 2 Nov 1999 08:26:52 -0600

67 lines

Re: HASL thickness spec help

[log in to unmask]

Tue, 2 Nov 1999 09:33:05 EST

27 lines

New Thread

Help with Gold Plating

Help with Gold Plating

Scott Lefebvre <[log in to unmask]>

Mon, 29 Nov 1999 08:09:08 -0800

76 lines

New Thread

high pressure + low humidity = stress

high pressure + low humidity = stress

Richard Tilbrook <[log in to unmask]>

Fri, 19 Nov 1999 11:01:18 +0000

43 lines

Re: high pressure + low humidity = stress

Cash, Alan <[log in to unmask]>

Fri, 19 Nov 1999 12:45:53 -0500

81 lines

Re: high pressure + low humidity = stress

Dieselberg, Ron <[log in to unmask]>

Mon, 22 Nov 1999 06:55:23 -0500

82 lines

New Thread

high pressure + low humidity = stress !!!

high pressure + low humidity = stress !!!

Richard Tilbrook <[log in to unmask]>

Tue, 16 Nov 1999 10:07:49 +0000

40 lines

Re: high pressure + low humidity = stress !!!

Blomberg, Rainer (FL51) <[log in to unmask]>

Tue, 16 Nov 1999 08:52:41 -0500

75 lines

New Thread

Hole size Vs lead size

Hole size Vs lead size

Scott Rebman <[log in to unmask]>

Wed, 10 Nov 1999 09:09:22 -0800

29 lines

Re: Hole size Vs lead size

Kuczynski Michael <[log in to unmask]>

Wed, 10 Nov 1999 12:53:49 -0500

68 lines

Re: Hole size Vs lead size

Hiteshew, Michael <[log in to unmask]>

Wed, 10 Nov 1999 14:05:50 -0500

71 lines

New Thread

How to plate EN on Magnesium

How to plate EN on Magnesium

ccfswr <[log in to unmask]>

Tue, 30 Nov 1999 09:18:17 +0800

97 lines

How to Plate EN on Magnesium

ccfswr <[log in to unmask]>

Tue, 30 Nov 1999 09:16:39 +0800

98 lines

Re: How to plate EN on Magnesium

Phil Crepeau <[log in to unmask]>

Tue, 30 Nov 1999 07:40:38 -0800

53 lines

New Thread

IC package plastic molding compound

Re: IC package plastic molding compound

Alderete, Michael <[log in to unmask]>

Mon, 1 Nov 1999 10:54:32 -0800

53 lines

Re: IC package plastic molding compound

Stephen R. Gregory <[log in to unmask]>

Mon, 1 Nov 1999 14:17:19 EST

63 lines

Re: IC package plastic molding compound

Shean Dalton <[log in to unmask]>

Mon, 1 Nov 1999 16:05:46 -0600

78 lines

New Thread

immersion tin as a surface finish

immersion tin as a surface finish

Ryan Grant <[log in to unmask]>

Wed, 3 Nov 1999 05:42:27 -0700

39 lines

Re: immersion tin as a surface finish

Franklin <[log in to unmask]>

Wed, 3 Nov 1999 09:22:25 -0600

123 lines

Re: immersion tin as a surface finish

[log in to unmask]

Wed, 3 Nov 1999 20:29:42 EST

41 lines

Re: immersion tin as a surface finish

Franklin <[log in to unmask]>

Thu, 4 Nov 1999 07:15:15 -0800

94 lines

Re: immersion tin as a surface finish

Frank Freitas <[log in to unmask]>

Sat, 6 Nov 1999 10:16:39 -0500

87 lines

Re: immersion tin as a surface finish

Don Janus <[log in to unmask]>

Sat, 6 Nov 1999 12:36:32 -0500

222 lines

New Thread

Impedance program

Impedance program

Tuan Le <[log in to unmask]>

Wed, 17 Nov 1999 07:35:44 -0800

68 lines

Re: Impedance program

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 17 Nov 1999 17:30:12 +0100

38 lines

Re: Impedance program

brian carlson <[log in to unmask]>

Wed, 17 Nov 1999 08:35:10 -0800

49 lines

Re: Impedance program

Geoff Layhe <[log in to unmask]>

Wed, 17 Nov 1999 17:02:48 -0000

46 lines

Re: Impedance program

Evan Durant <[log in to unmask]>

Wed, 17 Nov 1999 13:23:17 -0500

43 lines

Re: Impedance program

Tuan Le <[log in to unmask]>

Wed, 17 Nov 1999 13:42:20 -0800

180 lines

Re: Impedance program

Bates, Barry L <[log in to unmask]>

Fri, 19 Nov 1999 09:41:12 +0000

76 lines

New Thread

Info needed on mechanical properties of solder

Re: Info needed on mechanical properties of solder

David Hillman <[log in to unmask]>

Wed, 3 Nov 1999 17:25:59 -0600

57 lines

New Thread

Information Needed

Information Needed

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 30 Nov 1999 08:57:25 -0500

30 lines

Re: Information Needed

Pat Kane <[log in to unmask]>

Tue, 30 Nov 1999 09:14:59 EST

30 lines

Re: Information Needed

David Hillman <[log in to unmask]>

Tue, 30 Nov 1999 08:17:43 -0600

67 lines

Re: Information Needed

Parr, Aric <[log in to unmask]>

Tue, 30 Nov 1999 10:56:08 EST

58 lines

Re: Information Needed

Douglas O. Pauls <[log in to unmask]>

Tue, 30 Nov 1999 11:37:25 EST

49 lines

Information Needed

Wanner Bernhard <[log in to unmask]>

Tue, 30 Nov 1999 18:57:02 +0100

57 lines

New Thread

Inspection of repaired boards

Inspection of repaired boards

Roger Hill <[log in to unmask]>

Sat, 27 Nov 1999 13:01:57 -0600

35 lines

Re: Inspection of repaired boards

Cash, Alan <[log in to unmask]>

Mon, 29 Nov 1999 11:42:06 -0500

65 lines

Re: Inspection of repaired boards

Nancy Trumbull <[log in to unmask]>

Mon, 29 Nov 1999 12:38:21 -0500

84 lines

New Thread

Intrusive Reflow

Intrusive Reflow

Stephen R. Gregory <[log in to unmask]>

Thu, 11 Nov 1999 14:51:34 EST

57 lines

Re: Intrusive Reflow

Thorup, John <[log in to unmask]>

Thu, 11 Nov 1999 12:31:12 -0800

99 lines

Re: Intrusive Reflow

Severson, Scott M. <[log in to unmask]>

Thu, 11 Nov 1999 14:47:56 -0600

113 lines

Re: Intrusive Reflow

Marsico, James <[log in to unmask]>

Thu, 11 Nov 1999 15:48:03 -0500

99 lines

Intrusive Reflow

Jeff Hempton <[log in to unmask]>

Thu, 11 Nov 1999 15:14:09 -0500

112 lines

Re: Intrusive Reflow

Stephen R. Gregory <[log in to unmask]>

Thu, 11 Nov 1999 16:21:49 EST

62 lines

Re: Intrusive Reflow

Guenter Grossmann <[log in to unmask]>

Fri, 12 Nov 1999 09:03:02 +0100

33 lines

Re: Intrusive Reflow

Felix Lane <[log in to unmask]>

Fri, 12 Nov 1999 08:07:58 +0000

45 lines

Re: Intrusive Reflow

d. terstegge <[log in to unmask]>

Fri, 12 Nov 1999 10:53:11 +0100

92 lines

Re: Intrusive Reflow

Stephen R. Gregory <[log in to unmask]>

Fri, 12 Nov 1999 08:40:53 EST

39 lines

Re: Intrusive Reflow

McMonagle, Michael R. <[log in to unmask]>

Fri, 12 Nov 1999 08:52:25 -0600

74 lines

Re: Intrusive Reflow

Gary Camac <[log in to unmask]>

Fri, 12 Nov 1999 15:42:25 -0600

399 lines

Re: Intrusive Reflow

Jeff Hempton <[log in to unmask]>

Tue, 16 Nov 1999 11:23:16 -0500

100 lines

Re: Intrusive Reflow

Jim Zanolli <[log in to unmask]>

Wed, 17 Nov 1999 09:27:04 -0500

121 lines

Re: Intrusive Reflow

Peter Codella <[log in to unmask]>

Wed, 17 Nov 1999 16:26:22 -0800

159 lines

New Thread

Intrusive Reflow (one-more-time)

Re: Intrusive Reflow (one-more-time)

Jeff Hempton <[log in to unmask]>

Tue, 16 Nov 1999 11:56:41 -0500

130 lines

New Thread

IPC Documents

IPC Documents

Kathy Palumbo <[log in to unmask]>

Tue, 23 Nov 1999 11:13:46 -0800

37 lines

Re: IPC Documents

chris johnston <[log in to unmask]>

Wed, 24 Nov 1999 07:57:34 +1100

72 lines

Re: IPC Documents

Kathy Palumbo <[log in to unmask]>

Tue, 23 Nov 1999 15:25:44 -0800

110 lines

Re: IPC Documents

Jack Crawford <[log in to unmask]>

Wed, 24 Nov 1999 09:00:19 -0600

77 lines

New Thread

IPC-6012 Electrical Test Requirements

IPC-6012 Electrical Test Requirements

Gfranck <[log in to unmask]>

Mon, 8 Nov 1999 10:40:15 -0500

55 lines

Re: IPC-6012 Electrical Test Requirements

Hans Shin <[log in to unmask]>

Mon, 8 Nov 1999 13:08:14 -0800

86 lines

New Thread

Job Opening: Sales Support/New Products Engineer

Job Opening: Sales Support/New Products Engineer

Glynn Shaw <[log in to unmask]>

Thu, 4 Nov 1999 08:15:56 -0800

76 lines

New Thread

Kapton (Tm) materials...

Kapton (Tm) materials...

Stephen R. Gregory <[log in to unmask]>

Mon, 1 Nov 1999 23:22:23 EST

46 lines

Re: Kapton (Tm) materials...

Paul Klasek <[log in to unmask]>

Tue, 2 Nov 1999 16:17:12 +1100

98 lines

Re: Kapton (Tm) materials...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 2 Nov 1999 08:57:37 +0100

53 lines

Re: Kapton (Tm) materials...

joyce <[log in to unmask]>

Tue, 2 Nov 1999 06:14:30 -0500

80 lines

Re: Kapton (Tm) materials...

Kelly M. Schriver <[log in to unmask]>

Tue, 2 Nov 1999 06:05:43 -0600

100 lines

Re: Kapton (Tm) materials...

Ahne Oosterhof <[log in to unmask]>

Tue, 2 Nov 1999 10:30:48 -0800

96 lines

New Thread

Ku-band waveguide gasket

Ku-band waveguide gasket

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 19 Nov 1999 08:24:10 +0100

26 lines

Re: Ku-band waveguide gasket

Bates, Barry L <[log in to unmask]>

Fri, 19 Nov 1999 09:27:02 +0100

86 lines

Re: Ku-band waveguide gasket

JBosserm <[log in to unmask]>

Fri, 19 Nov 1999 07:39:51 -0600

78 lines

Re: Ku-band waveguide gasket

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 19 Nov 1999 15:32:43 +0100

66 lines

Re: Ku-band waveguide gasket

Michael Fenner <[log in to unmask]>

Fri, 19 Nov 1999 14:25:16 -0000

68 lines

Re: Ku-band waveguide gasket

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 22 Nov 1999 08:28:53 +0100

77 lines

Re: Ku-band waveguide gasket

Dieselberg, Ron <[log in to unmask]>

Mon, 22 Nov 1999 15:42:08 -0500

64 lines

New Thread

Laminate requirement

Laminate requirement

Colin <[log in to unmask]>

Mon, 29 Nov 1999 05:00:07 -0600

33 lines

Re: Laminate requirement

Geoff Layhe <[log in to unmask]>

Mon, 29 Nov 1999 11:55:03 -0000

73 lines

Re: Laminate requirement

Ed Cosper <[log in to unmask]>

Mon, 29 Nov 1999 08:57:40 -0500

72 lines

New Thread

Land Size Calculation

Land Size Calculation

Dieffenbacher, William C <[log in to unmask]>

Mon, 29 Nov 1999 07:45:52 -0500

53 lines

Re: Land Size Calculation

Gary Ferrari <[log in to unmask]>

Mon, 29 Nov 1999 10:06:39 EST

43 lines

New Thread

Larger Assemblies

Larger Assemblies

Andy Mackie <[log in to unmask]>

Fri, 12 Nov 1999 15:13:09 -0500

41 lines

New Thread

Lead Free EMA Meeting in Seattle

Lead Free EMA Meeting in Seattle

Kenny Bloomquist <[log in to unmask]>

Thu, 4 Nov 1999 12:33:58 -0800

46 lines

Re: Lead Free EMA Meeting in Seattle

Carey Pico <[log in to unmask]>

Thu, 4 Nov 1999 13:42:38 -0800

91 lines

Re: Lead Free EMA Meeting in Seattle

Goldman, Patricia J. <[log in to unmask]>

Fri, 5 Nov 1999 08:34:51 -0500

129 lines

New Thread

Lead Free Soldering SMTA Meeting this Thursday

Lead Free Soldering SMTA Meeting this Thursday

Stuart Chessen <[log in to unmask]>

Wed, 17 Nov 1999 07:24:00 -0800

51 lines

New Thread

Lead issues

Lead issues

Ed Cosper <[log in to unmask]>

Mon, 8 Nov 1999 11:12:54 -0500

102 lines

Re: Lead issues

Jack Crawford <[log in to unmask]>

Mon, 8 Nov 1999 10:32:00 -0600

53 lines

Re: Lead issues

Goldman, Patricia J. <[log in to unmask]>

Mon, 8 Nov 1999 11:51:14 -0500

85 lines

Re: Lead issues

Carey Pico <[log in to unmask]>

Mon, 8 Nov 1999 17:42:48 -0800

121 lines

New Thread

Lead Pull Strengths

Lead Pull Strengths

Kathy Palumbo <[log in to unmask]>

Tue, 23 Nov 1999 11:01:27 -0800

40 lines

New Thread

Long term storage of electronic components

Long term storage of electronic components

Richard Tilbrook <[log in to unmask]>

Tue, 16 Nov 1999 12:05:01 +0000

59 lines

Re: Long term storage of electronic components

Ryan Grant <[log in to unmask]>

Tue, 16 Nov 1999 08:06:23 -0700

99 lines

Re: Long term storage of electronic components

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 17 Nov 1999 09:05:46 +0100

73 lines

Re: Long term storage of electronic components

Charles Barker <[log in to unmask]>

Wed, 17 Nov 1999 07:57:14 -0600

102 lines

Re: Long term storage of electronic components

Bates, Barry L <[log in to unmask]>

Wed, 17 Nov 1999 15:45:32 -0000

120 lines

Re: Long term storage of electronic components

Chris Evans <[log in to unmask]>

Wed, 17 Nov 1999 12:41:01 +0000

78 lines

New Thread

Looking for

Looking for

Karl Sauter <[log in to unmask]>

Mon, 8 Nov 1999 14:00:47 -0800

31 lines

Re: Looking for

Karl Sauter <[log in to unmask]>

Tue, 9 Nov 1999 08:36:41 -0800

43 lines

New Thread

looking for a document NPS 25001

looking for a document NPS 25001

Denis Seguin <[log in to unmask]>

Tue, 2 Nov 1999 16:10:01 -0500

37 lines

Re: looking for a document NPS 25001

Erat, Wolfgang <[log in to unmask]>

Tue, 2 Nov 1999 16:38:39 -0500

72 lines

New Thread

Looking for file format converter

Looking for file format converter

Tom Hybiske <[log in to unmask]>

Fri, 5 Nov 1999 08:43:15 -0500

35 lines

Re: Looking for file format converter

Matthias Mansfeld <[log in to unmask]>

Fri, 5 Nov 1999 16:17:49 +0100

61 lines

Re: Looking for file format converter

Thomas DeSmit <[log in to unmask]>

Fri, 5 Nov 1999 10:26:21 -0600

83 lines

Re: Looking for file format converter

Rod Simon <[log in to unmask]>

Fri, 5 Nov 1999 12:23:41 -0600

65 lines

New Thread

Looking for file format converter - followup

Looking for file format converter - followup

Tom Hybiske <[log in to unmask]>

Fri, 5 Nov 1999 14:09:28 -0500

34 lines

New Thread

Looking for list of prepreg and core thickness for FR-4

Looking for list of prepreg and core thickness for FR-4

Barbara Burcham <[log in to unmask]>

Mon, 22 Nov 1999 15:54:03 -0600

28 lines

Re: Looking for list of prepreg and core thickness for FR-4

brian carlson <[log in to unmask]>

Mon, 22 Nov 1999 16:23:24 -0800

85 lines

Re: Looking for list of prepreg and core thickness for FR-4

Stephen R. Gregory <[log in to unmask]>

Mon, 22 Nov 1999 19:44:14 EST

44 lines

Re: Looking for list of prepreg and core thickness for FR-4

Phil Crepeau <[log in to unmask]>

Mon, 22 Nov 1999 17:21:07 -0800

78 lines

Re: Looking for list of prepreg and core thickness for FR-4

Stephen R. Gregory <[log in to unmask]>

Mon, 22 Nov 1999 20:56:54 EST

54 lines

Re: Looking for list of prepreg and core thickness for FR-4

Bob Dube <[log in to unmask]>

Tue, 23 Nov 1999 08:29:44 -0500

62 lines

Re: Looking for list of prepreg and core thickness for FR-4

Timothy Reeves <[log in to unmask]>

Tue, 23 Nov 1999 12:21:52 -0800

75 lines

Re: Looking for list of prepreg and core thickness for FR-4

Mcmaster, Michael <[log in to unmask]>

Wed, 24 Nov 1999 08:41:20 -0800

123 lines

New Thread

Low Gold thickness-Bromine correction on XRF

Low Gold thickness-Bromine correction on XRF

Anil Kher <[log in to unmask]>

Tue, 23 Nov 1999 09:43:35 +0530

83 lines

Re: Low Gold thickness-Bromine correction on XRF

Alain Savard <[log in to unmask]>

Tue, 23 Nov 1999 08:30:03 -0500

42 lines

Re: Low Gold thickness-Bromine correction on XRF

[log in to unmask]

Wed, 24 Nov 1999 02:32:41 +0100

122 lines

New Thread

LPISM

LPISM

Scott B. Westheimer <[log in to unmask]>

Fri, 5 Nov 1999 15:47:43 +0800

32 lines

New Thread

LPISM Cleaning

LPISM Cleaning

Denis Bégin <[log in to unmask]>

Mon, 8 Nov 1999 11:38:22 -0500

52 lines

Re: LPISM Cleaning

Phil Crepeau <[log in to unmask]>

Mon, 8 Nov 1999 10:27:16 -0800

105 lines

Re: LPISM Cleaning

Brian Ellis <[log in to unmask]>

Tue, 9 Nov 1999 09:54:45 +0200

100 lines

New Thread

Matrix Tray Packaging

Matrix Tray Packaging

Hamilton, Richard CLE 4454 <[log in to unmask]>

Thu, 4 Nov 1999 11:13:33 -0700

40 lines

Re: Matrix Tray Packaging

Stephen R. Gregory <[log in to unmask]>

Thu, 4 Nov 1999 13:54:41 EST

55 lines

Re: Matrix Tray Packaging

joyce <[log in to unmask]>

Thu, 4 Nov 1999 18:39:42 -0500

64 lines

New Thread

Matrix Tray Packaging, there's a mo' betta page...

Re: Matrix Tray Packaging, there's a mo' betta page...

Stephen R. Gregory <[log in to unmask]>

Thu, 4 Nov 1999 14:18:42 EST

35 lines

New Thread

Measurement Services

Measurement Services

Glenn Pelkey <[log in to unmask]>

Tue, 23 Nov 1999 13:52:44 PST

28 lines

Re: Measurement Services

Stephen R. Gregory <[log in to unmask]>

Tue, 23 Nov 1999 17:05:15 EST

51 lines

New Thread

Meeting notice, Smoky Mountain Designers Council

Meeting notice, Smoky Mountain Designers Council

Thomas Martin <[log in to unmask]>

Thu, 11 Nov 1999 20:09:28 -0500

37 lines

New Thread

Micro-BGA Stuff...and patents...

Re: Micro-BGA Stuff...and patents...

Bill Davis <[log in to unmask]>

Tue, 2 Nov 1999 09:22:54 -0800

141 lines

New Thread

MICRO-SECTIONS

MICRO-SECTIONS

Brunker Ed <[log in to unmask]>

Tue, 16 Nov 1999 12:19:41 -0000

33 lines

Re: MICRO-SECTIONS

Katherine Henderson <[log in to unmask]>

Tue, 16 Nov 1999 13:47:45 -0000

67 lines

Re: MICRO-SECTIONS

John Barton <[log in to unmask]>

Wed, 17 Nov 1999 13:59:18 -0000

66 lines

New Thread

Microscope for PWB and PWBA inspection -Reply

Re: Microscope for PWB and PWBA inspection -Reply

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 1 Nov 1999 08:50:24 +0100

74 lines

New Thread

Mike Schumacher --Contact please

Mike Schumacher --Contact please

Rudy Sedlak <[log in to unmask]>

Wed, 10 Nov 1999 19:43:28 EST

30 lines

New Thread

Mil Spec for nickel and gold thickness

Mil Spec for nickel and gold thickness

Stephen Ayotte <[log in to unmask]>

Tue, 9 Nov 1999 05:50:24 -0500

28 lines

Re: Mil Spec for nickel and gold thickness

Blomberg, Rainer (FL51) <[log in to unmask]>

Tue, 9 Nov 1999 10:11:05 -0500

73 lines

New Thread

MIL SPEC QUESTION

Re: MIL SPEC QUESTION

Timothy Reeves <[log in to unmask]>

Mon, 1 Nov 1999 11:00:05 -0800

48 lines

Re: MIL SPEC QUESTION

Timothy Reeves <[log in to unmask]>

Tue, 2 Nov 1999 12:28:55 -0800

55 lines

MIL SPEC QUESTION

Scott Holmes <[log in to unmask]>

Mon, 8 Nov 1999 15:31:24 -0500

32 lines

Re: MIL SPEC QUESTION

Hans Shin <[log in to unmask]>

Mon, 8 Nov 1999 12:59:18 -0800

63 lines

Re: MIL SPEC QUESTION

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Mon, 8 Nov 1999 21:05:14 -0000

41 lines

Re: MIL SPEC QUESTION

Kuczynski Michael <[log in to unmask]>

Mon, 8 Nov 1999 16:01:12 -0500

38 lines

New Thread

MIL STDs Spreadsheet & posting files?

Re: MIL STDs Spreadsheet & posting files?

Matthew Lamkin <[log in to unmask]>

Thu, 18 Nov 1999 13:59:11 -0000

32 lines

New Thread

MIL STDs to Industry Standards Spreadsheet

MIL STDs to Industry Standards Spreadsheet

Eric Kalgren <[log in to unmask]>

Wed, 17 Nov 1999 12:24:32 -0700

42 lines

New Thread

MIL-P-13949

MIL-P-13949

Phil Belliveau <[log in to unmask]>

Fri, 12 Nov 1999 13:16:39 -0500

30 lines

Re: MIL-P-13949

Marsico, James <[log in to unmask]>

Fri, 12 Nov 1999 13:39:21 -0500

57 lines

Re: MIL-P-13949

Edwards, Ted A (AZ75) <[log in to unmask]>

Fri, 12 Nov 1999 12:08:28 -0700

295 lines

Re: MIL-P-13949

Timothy Reeves <[log in to unmask]>

Fri, 12 Nov 1999 14:16:31 -0800

38 lines

New Thread

MIL-STDs to Industry Standards

Re: MIL-STDs to Industry Standards

Eric Kalgren <[log in to unmask]>

Tue, 16 Nov 1999 15:44:35 -0700

41 lines

Re: MIL-STDs to Industry Standards

Cash, Alan <[log in to unmask]>

Tue, 16 Nov 1999 18:09:15 -0500

68 lines

Re: MIL-STDs to Industry Standards

Jack Crawford <[log in to unmask]>

Tue, 16 Nov 1999 17:28:43 -0600

75 lines

Re: MIL-STDs to Industry Standards

Kenneth Stephens <[log in to unmask]>

Tue, 16 Nov 1999 16:15:31 -0800

60 lines

Re: MIL-STDs to Industry Standards

Thomas Han <[log in to unmask]>

Tue, 16 Nov 1999 17:08:11 -0800

90 lines

Re: MIL-STDs to Industry Standards

Phil Crepeau <[log in to unmask]>

Tue, 16 Nov 1999 17:22:06 -0800

70 lines

Re: MIL-STDs to Industry Standards

Às±R´¼ (C.J.Long) P00_2300 <[log in to unmask]>

Wed, 17 Nov 1999 11:31:12 +0800

74 lines

Re: MIL-STDs to Industry Standards

Reddy, Srirama Thimma (Srirama) <[log in to unmask]>

Wed, 17 Nov 1999 03:55:21 -0500

119 lines

Re: MIL-STDs to Industry Standards

Richard Tilbrook <[log in to unmask]>

Wed, 17 Nov 1999 09:36:22 +0000

26 lines

Re: MIL-STDs to Industry Standards

Richard Mark Mazzoli <[log in to unmask]>

Wed, 17 Nov 1999 07:15:49 EST

31 lines

Re: MIL-STDs to Industry Standards

[log in to unmask]

Wed, 17 Nov 1999 07:05:27 -0500

32 lines

Re: MIL-STDs to Industry Standards

Charles E. McMahon <[log in to unmask]>

Wed, 17 Nov 1999 07:56:45 -0500

30 lines

Re: MIL-STDs to Industry Standards

Nick D'Onofrio <[log in to unmask]>

Wed, 17 Nov 1999 07:50:34 -0500

118 lines

Re: MIL-STDs to Industry Standards

Robert Peterson <[log in to unmask]>

Wed, 17 Nov 1999 07:57:35 -0500

76 lines

Re: MIL-STDs to Industry Standards

金鸿 <[log in to unmask]>

Wed, 17 Nov 1999 20:14:45 +0800

69 lines

Re: MIL-STDs to Industry Standards

Hooper Doug <[log in to unmask]>

Wed, 17 Nov 1999 08:24:00 -0500

112 lines

Re: MIL-STDs to Industry Standards

West, Jim <[log in to unmask]>

Wed, 17 Nov 1999 09:10:01 -0500

69 lines

Re: MIL-STDs to Industry Standards

Susan James <[log in to unmask]>

Wed, 17 Nov 1999 09:18:15 -0600

34 lines

Re: MIL-STDs to Industry Standards

<Janice LePage> <[log in to unmask]>

Wed, 17 Nov 1999 07:48:03 -0800

30 lines

Re: MIL-STDs to Industry Standards

Eric Kalgren <[log in to unmask]>

Wed, 17 Nov 1999 12:26:36 -0700

103 lines

Re: MIL-STDs to Industry Standards

¬x¹t«H(Jesse Hung) Q60_5361 <[log in to unmask]>

Thu, 18 Nov 1999 08:18:49 +0800

143 lines

Re: MIL-STDs to Industry Standards

Dieselberg, Ron <[log in to unmask]>

Thu, 18 Nov 1999 05:06:48 -0500

68 lines

Re: MIL-STDs to Industry Standards

Matthew Lamkin <[log in to unmask]>

Thu, 18 Nov 1999 10:23:13 -0000

53 lines

Re: MIL-STDs to Industry Standards

Peter Chiang <[log in to unmask]>

Fri, 19 Nov 1999 15:30:12 +0800

71 lines

Re: MIL-STDs to Industry Standards

Anil K. Singh <[log in to unmask]>

Fri, 19 Nov 1999 18:12:56 +0530

33 lines

Re: MIL-STDs to Industry Standards

Howieson, Rick <[log in to unmask]>

Fri, 19 Nov 1999 06:42:55 -0700

95 lines

New Thread

Mil/Ind Cross Reference List

Mil/Ind Cross Reference List

Jack Crawford <[log in to unmask]>

Thu, 18 Nov 1999 18:59:55 -0600

56 lines

New Thread

Multilayer PCB with re-inforced insulation

Multilayer PCB with re-inforced insulation

KK Chin <[log in to unmask]>

Mon, 22 Nov 1999 11:49:54 -0800

40 lines

Re: Multilayer PCB with re-inforced insulation

Mcmaster, Michael <[log in to unmask]>

Wed, 24 Nov 1999 08:33:38 -0800

85 lines

New Thread

My apologies...

My apologies...

Lou Hart <[log in to unmask]>

Mon, 29 Nov 1999 16:24:14 -0500

27 lines

New Thread

Mydata (Thrird Party Materials)

Mydata (Thrird Party Materials)

Thomas J. Gulley <[log in to unmask]>

Mon, 1 Nov 1999 10:04:04 -0600

32 lines

Re: Mydata (Thrird Party Materials)

Stephen R. Gregory <[log in to unmask]>

Mon, 1 Nov 1999 13:48:41 EST

59 lines

New Thread

Need of material testing labs

Need of material testing labs

May William D (Dean) CNIN <[log in to unmask]>

Wed, 3 Nov 1999 12:27:34 -0500

60 lines

Re: Need of material testing labs

Hans Shin <[log in to unmask]>

Wed, 3 Nov 1999 09:58:51 -0800

89 lines

Re: Need of material testing labs

Werner Engelmaier <[log in to unmask]>

Wed, 3 Nov 1999 16:36:55 EST

44 lines

Re: Need of material testing labs

Werner Engelmaier <[log in to unmask]>

Wed, 3 Nov 1999 20:14:44 EST

35 lines

New Thread

Need sample Gerber file

Need sample Gerber file

Bill Parlin <[log in to unmask]>

Thu, 18 Nov 1999 10:38:40 -0500

50 lines

New Thread

New IPC Program for translation of articles from Japanese Technical Journals

New IPC Program for translation of articles from Japanese Technical Journals

Jack Crawford <[log in to unmask]>

Thu, 11 Nov 1999 16:29:14 -0600

52 lines

New Thread

News on PCB - On-Line

News on PCB - On-Line

Roland <[log in to unmask]>

Tue, 30 Nov 1999 22:14:19 +0100

54 lines

New Thread

No Technical Content...Thanksgiving.

No Technical Content...Thanksgiving.

Stephen R. Gregory <[log in to unmask]>

Wed, 24 Nov 1999 15:41:51 EST

48 lines

New Thread

Nonconforming process indicators

Nonconforming process indicators

Tim Devaul <[log in to unmask]>

Wed, 10 Nov 1999 12:08:04 -0600

30 lines

Re: Nonconforming process indicators

Nancy Trumbull <[log in to unmask]>

Wed, 10 Nov 1999 15:01:50 -0500

72 lines

Re: Nonconforming process indicators

Jack Crawford <[log in to unmask]>

Wed, 10 Nov 1999 14:39:16 -0600

87 lines

Re: Nonconforming process indicators

Joan M.Slade <[log in to unmask]>

Wed, 10 Nov 1999 16:09:20 -0500

36 lines

Re: Nonconforming process indicators

Franklin <[log in to unmask]>

Wed, 10 Nov 1999 15:50:48 -0800

115 lines

New Thread

Out of touch

Out of touch

Charles Barker <[log in to unmask]>

Sun, 28 Nov 1999 12:08:48 -0600

38 lines

Re: Out of touch

Bev Christian <[log in to unmask]>

Sun, 28 Nov 1999 15:43:57 -0500

202 lines

Re: Out of touch

Charles E. McMahon <[log in to unmask]>

Sun, 28 Nov 1999 18:22:24 -0500

80 lines

Re: Out of touch

Stephen R. Gregory <[log in to unmask]>

Sun, 28 Nov 1999 19:15:12 EST

70 lines

Re: Out of touch

Dieselberg, Ron <[log in to unmask]>

Mon, 29 Nov 1999 08:15:55 -0500

69 lines

Re: Out of touch

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 29 Nov 1999 10:04:40 -0700

63 lines

Re: Out of touch

Paul, Fred <[log in to unmask]>

Mon, 29 Nov 1999 09:36:15 -0800

73 lines

Re: Out of touch

Goldman, Patricia J. <[log in to unmask]>

Mon, 29 Nov 1999 14:55:29 -0500

124 lines

Re: Out of touch

Mark Ross <[log in to unmask]>

Mon, 29 Nov 1999 15:20:49 -0500

154 lines

Re: Out of touch

Ed Cosper <[log in to unmask]>

Mon, 29 Nov 1999 16:47:28 -0500

189 lines

Re: Out of touch

Keel, Mike <[log in to unmask]>

Tue, 30 Nov 1999 08:41:04 -0800

95 lines

New Thread

Pad design for wave soldered SMT components

Pad design for wave soldered SMT components

Ivan Barrios <[log in to unmask]>

Mon, 22 Nov 1999 08:25:37 -0700

36 lines

Re: Pad design for wave soldered SMT components

d. terstegge <[log in to unmask]>

Tue, 23 Nov 1999 18:19:03 +0100

71 lines

New Thread

Panelized Gerber Files...

Panelized Gerber Files...

Stephen R. Gregory <[log in to unmask]>

Tue, 9 Nov 1999 19:11:45 EST

51 lines

Re: Panelized Gerber Files...

Matthias Mansfeld <[log in to unmask]>

Wed, 10 Nov 1999 01:35:25 +0100

60 lines

Re: Panelized Gerber Files...

Ahne Oosterhof <[log in to unmask]>

Tue, 9 Nov 1999 16:28:34 -0800

101 lines

Re: Panelized Gerber Files...

John Parsons <[log in to unmask]>

Tue, 9 Nov 1999 16:42:23 -0800

68 lines

Re: Panelized Gerber Files...

Stephen R. Gregory <[log in to unmask]>

Tue, 9 Nov 1999 20:49:41 EST

78 lines

Re: Panelized Gerber Files...

Joseph E. J. Duclos Jr. <[log in to unmask]>

Tue, 9 Nov 1999 21:15:25 -0500

105 lines

Re: Panelized Gerber Files...

Franklin <[log in to unmask]>

Wed, 10 Nov 1999 07:39:19 -0800

110 lines

Re: Panelized Gerber Files...

Matthew Lamkin <[log in to unmask]>

Wed, 10 Nov 1999 13:39:16 -0000

93 lines

Re: Panelized Gerber Files...

Charles Barker <[log in to unmask]>

Wed, 10 Nov 1999 08:37:05 -0600

123 lines

New Thread

Parts Quoting Service

Parts Quoting Service

Russ Steiner <[log in to unmask]>

Tue, 16 Nov 1999 08:36:03 EST

29 lines

New Thread

PC Pictures

PC Pictures

Richard Gisenia <[log in to unmask]>

Mon, 8 Nov 1999 20:37:27 -0800

38 lines

Re: PC Pictures

Stephen R. Gregory <[log in to unmask]>

Tue, 9 Nov 1999 09:09:02 EST

41 lines

Re: PC Pictures

Richard Gisenia <[log in to unmask]>

Tue, 9 Nov 1999 07:01:15 -0800

83 lines

Re: PC Pictures

Padraig MacCormaic <[log in to unmask]>

Tue, 9 Nov 1999 15:53:58 +0000

170 lines

Re: PC Pictures

David Whalley <[log in to unmask]>

Wed, 10 Nov 1999 11:31:22 +0000

40 lines

Re: PC Pictures

Jeff Ferry <[log in to unmask]>

Wed, 10 Nov 1999 17:01:47 -0800

76 lines

New Thread

PCB board material for high freq product

PCB board material for high freq product

Ko Adeline-FSGA2298 <[log in to unmask]>

Thu, 18 Nov 1999 20:10:10 +0800

45 lines

Re: PCB board material for high freq product

McGlaughlin, Jeffrey A <[log in to unmask]>

Thu, 18 Nov 1999 07:33:14 -0500

84 lines

Re: PCB board material for high freq product

[log in to unmask]

Thu, 18 Nov 1999 08:44:35 EST

28 lines

Re: PCB board material for high freq product

Brian Ellis <[log in to unmask]>

Thu, 18 Nov 1999 17:28:42 +0200

76 lines

Re: PCB board material for high freq product

Lum Wee Mei <[log in to unmask]>

Mon, 22 Nov 1999 12:33:54 +0800

96 lines

New Thread

PCB design question

PCB design question

Neyman, Stella <[log in to unmask]>

Tue, 23 Nov 1999 12:01:33 EST

32 lines

Re: PCB design question

Hiteshew, Michael <[log in to unmask]>

Tue, 23 Nov 1999 15:18:20 -0500

71 lines

New Thread

PCB shop auditing

Re: PCB shop auditing

Timothy A. Estes <[log in to unmask]>

Mon, 1 Nov 1999 08:04:09 -0600

854 lines

New Thread

PCB vendor with leading edge technology

PCB vendor with leading edge technology

Goh Guan Chye <[log in to unmask]>

Fri, 19 Nov 1999 13:35:15 +0800

37 lines

Re: PCB vendor with leading edge technology

Dr. W. Schmidt <[log in to unmask]>

Fri, 19 Nov 1999 10:54:20 +0100

59 lines

Re: PCB vendor with leading edge technology

Charles E. McMahon <[log in to unmask]>

Fri, 19 Nov 1999 08:17:33 -0500

76 lines

Re: PCB vendor with leading edge technology

Juan Robertson <[log in to unmask]>

Fri, 19 Nov 1999 08:08:29 -0800

209 lines

Re: PCB vendor with leading edge technology

Ed Cosper <[log in to unmask]>

Fri, 19 Nov 1999 14:33:42 -0500

70 lines

New Thread

PCBA burning Test

PCBA burning Test

Nicholas LAI <[log in to unmask]>

Tue, 23 Nov 1999 13:43:19 +0800

32 lines

New Thread

PCI Bus Dimensions

PCI Bus Dimensions

[log in to unmask]

Wed, 3 Nov 1999 14:07:17 PST

32 lines

New Thread

Pin in hole stencil aperture

Pin in hole stencil aperture

Aric Parr <[log in to unmask]>

Wed, 24 Nov 1999 13:12:15 EST

39 lines

Re: Pin in hole stencil aperture

Felix Lane <[log in to unmask]>

Thu, 25 Nov 1999 21:06:31 +0000

36 lines

New Thread

Plasma etch technical articles

Plasma etch technical articles

Hawkins, Chuck <[log in to unmask]>

Tue, 30 Nov 1999 12:27:53 -0700

27 lines

New Thread

Power Supply PCB's

Power Supply PCB's

Julie Dixon <[log in to unmask]>

Wed, 3 Nov 1999 10:49:16 EST

50 lines

Re: Power Supply PCB's

KK Chin <[log in to unmask]>

Wed, 3 Nov 1999 09:23:10 -0800

96 lines

Power Supply PCB's

Julie Dixon <[log in to unmask]>

Wed, 3 Nov 1999 13:19:40 EST

31 lines

Re: Power Supply PCB's

Thorup, John <[log in to unmask]>

Wed, 3 Nov 1999 10:28:18 -0800

68 lines

Re: Power Supply PCB's

KK Chin <[log in to unmask]>

Wed, 3 Nov 1999 11:31:07 -0800

32 lines

New Thread

PQFP trays....

PQFP trays....

John Brewer <[log in to unmask]>

Fri, 5 Nov 1999 10:48:54 -0500

41 lines

New Thread

Pre-tinning and Solder plating

Pre-tinning and Solder plating

Richard Do <[log in to unmask]>

Tue, 9 Nov 1999 16:18:56 -0800

43 lines

New Thread

Printed Wiring Conductor Spacing for Dielectric Breakdown

Printed Wiring Conductor Spacing for Dielectric Breakdown

Dave Hiemstra <[log in to unmask]>

Thu, 25 Nov 1999 07:52:55 -0500

30 lines

New Thread

Prior to PCB layout

Prior to PCB layout

Charles Law <[log in to unmask]>

Fri, 26 Nov 1999 09:21:24 GMT

37 lines

New Thread

Problem of moisture on PCB

Problem of moisture on PCB

StevenLee <[log in to unmask]>

Wed, 10 Nov 1999 09:31:53 +0800

33 lines

New Thread

Propagation delay compliance

Propagation delay compliance

brian carlson <[log in to unmask]>

Fri, 5 Nov 1999 16:35:39 -0800

35 lines

New Thread

Pulse plating

Pulse plating

brian carlson <[log in to unmask]>

Wed, 24 Nov 1999 08:18:55 -0800

43 lines

Re: Pulse plating

[log in to unmask] <[log in to unmask]>

Wed, 24 Nov 1999 21:54:03 +0000

54 lines

Re: Pulse plating

Alain Savard <[log in to unmask]>

Thu, 25 Nov 1999 07:56:41 -0500

64 lines

Re: Pulse plating

Stephane Menard <[log in to unmask]>

Fri, 26 Nov 1999 12:20:19 EST

49 lines

Re: Pulse plating

Alain Savard <[log in to unmask]>

Mon, 29 Nov 1999 10:44:22 -0500

83 lines

Re: Pulse plating

Ted Stern <[log in to unmask]>

Mon, 29 Nov 1999 10:13:59 -0600

79 lines

Re: Pulse plating

<Joe Malley> <[log in to unmask]>

Mon, 29 Nov 1999 11:11:55 -0500

129 lines

Re: Pulse plating

Mordechai Holtzman <[log in to unmask]>

Mon, 29 Nov 1999 11:58:22 EST

38 lines

Re: Pulse plating

<Joe Malley> <[log in to unmask]>

Mon, 29 Nov 1999 11:56:31 -0500

177 lines

Re: Pulse plating

Stephane Menard <[log in to unmask]>

Mon, 29 Nov 1999 12:51:36 EST

64 lines

Re: Pulse plating

[log in to unmask]

Mon, 29 Nov 1999 13:09:15 EST

72 lines

Re: Pulse plating

Mordechai Holtzman <[log in to unmask]>

Mon, 29 Nov 1999 13:43:43 EST

33 lines

Re: Pulse plating

Mordechai Holtzman <[log in to unmask]>

Mon, 29 Nov 1999 14:03:58 EST

36 lines

New Thread

PWB dielectric test method

PWB dielectric test method

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 22 Nov 1999 11:21:16 +0100

37 lines

New Thread

QFP Tray Packaging

QFP Tray Packaging

Hamilton, Richard CLE 4454 <[log in to unmask]>

Thu, 4 Nov 1999 17:06:33 -0700

63 lines

Re: QFP Tray Packaging

Stephen R. Gregory <[log in to unmask]>

Thu, 4 Nov 1999 19:51:30 EST

90 lines

Re: QFP Tray Packaging

Hamilton, Richard CLE 4454 <[log in to unmask]>

Thu, 4 Nov 1999 17:57:07 -0700

65 lines

Re: QFP Tray Packaging

Stephen R. Gregory <[log in to unmask]>

Thu, 4 Nov 1999 20:14:46 EST

42 lines

Re: QFP Tray Packaging

joyce <[log in to unmask]>

Thu, 4 Nov 1999 20:21:09 -0500

86 lines

Re: QFP Tray Packaging

Cyker, Howard A (Howie) <[log in to unmask]>

Fri, 5 Nov 1999 08:37:44 -0500

107 lines

Re: QFP Tray Packaging

Tempea, Ioan <[log in to unmask]>

Fri, 5 Nov 1999 08:51:33 -0500

50 lines

Re: QFP Tray Packaging

Stephen R. Gregory <[log in to unmask]>

Fri, 5 Nov 1999 10:13:36 EST

65 lines

Re: QFP Tray Packaging

Bill Davis <[log in to unmask]>

Fri, 5 Nov 1999 08:19:42 -0800

138 lines

New Thread

QFP Tray Packaging...(deslexia attack)

Re: QFP Tray Packaging...(deslexia attack)

Stephen R. Gregory <[log in to unmask]>

Fri, 5 Nov 1999 10:36:30 EST

33 lines

New Thread

QUAD GUI database of component dimensions?

QUAD GUI database of component dimensions?

Matthew Lamkin <[log in to unmask]>

Thu, 11 Nov 1999 16:17:59 -0000

54 lines

New Thread

Qualificationof Solder Joints

Qualificationof Solder Joints

Eric Christison <[log in to unmask]>

Wed, 10 Nov 1999 06:31:02 -0600

39 lines

Re: Qualificationof Solder Joints

Werner Engelmaier <[log in to unmask]>

Wed, 10 Nov 1999 20:53:58 EST

42 lines

New Thread

quality engineering

quality engineering

Elaine Gamboa <[log in to unmask]>

Tue, 2 Nov 1999 08:57:21 -0600

52 lines

Re: quality engineering

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 2 Nov 1999 17:03:17 +0100

48 lines

New Thread

Quote Service?

Quote Service?

Russ Steiner <[log in to unmask]>

Wed, 17 Nov 1999 13:07:48 EST

41 lines

New Thread

Re [TN] Tin vs. Tin/Lead solder

Re [TN] Tin vs. Tin/Lead solder

Barmuta, Mike <[log in to unmask]>

Fri, 5 Nov 1999 15:00:01 -0800

116 lines

New Thread

reflow profile

reflow profile

Chetan Shah <[log in to unmask]>

Mon, 22 Nov 1999 23:08:02 PST

34 lines

New Thread

ReGlovesor FingerCots

ReGlovesor FingerCots

James H. Moffitt <[log in to unmask]>

Thu, 25 Nov 1999 20:47:22 EST

43 lines

Re: ReGlovesor FingerCots

Cash, Alan <[log in to unmask]>

Mon, 29 Nov 1999 12:18:54 -0500

77 lines

Re: ReGlovesor FingerCots

Kenny Bloomquist <[log in to unmask]>

Mon, 29 Nov 1999 09:54:07 -0800

42 lines

Re: ReGlovesor FingerCots

Brian Ellis <[log in to unmask]>

Tue, 30 Nov 1999 11:25:10 +0200

102 lines

New Thread

ReInspection of Repairs

ReInspection of Repairs

James H. Moffitt <[log in to unmask]>

Sun, 28 Nov 1999 15:31:35 EST

36 lines

New Thread

required PWB co-planarity for BGAs

required PWB co-planarity for BGAs

Hunter, Brian C <[log in to unmask]>

Tue, 30 Nov 1999 14:25:27 -0700

35 lines

New Thread

Rising flame war. was: Re: [TN] Tarnish after resist str

Rising flame war. was: Re: [TN] Tarnish after resist str

Matthias Mansfeld <[log in to unmask]>

Tue, 23 Nov 1999 18:49:23 +0100

48 lines

New Thread

RSVP Smoky Mountain Designers Council meeting

RSVP Smoky Mountain Designers Council meeting

Thomas Martin <[log in to unmask]>

Thu, 11 Nov 1999 20:16:56 -0500

24 lines

New Thread

Second HAL and Warpage

Second HAL and Warpage

Wang, William (Suzhou Laminate) <[log in to unmask]>

Wed, 17 Nov 1999 16:56:00 -0700

28 lines

New Thread

SIGNOFF TECHNET

SIGNOFF TECHNET

Paul Brown <[log in to unmask]>

Mon, 22 Nov 1999 22:26:23 -0000

132 lines

New Thread

SIR

SIR

wmlee1 <[log in to unmask]>

Tue, 23 Nov 1999 00:00:06 +0800

99 lines

Re: SIR

Bev Christian <[log in to unmask]>

Wed, 24 Nov 1999 07:30:18 -0600

198 lines

Re: SIR

Brian Ellis <[log in to unmask]>

Wed, 24 Nov 1999 16:32:08 +0200

86 lines

Re: SIR

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 25 Nov 1999 10:58:43 +0100

39 lines

SIR

wmlee1 <[log in to unmask]>

Fri, 26 Nov 1999 00:58:44 +0800

62 lines

SIR

wmlee1 <[log in to unmask]>

Fri, 26 Nov 1999 01:15:56 +0800

128 lines

Re: SIR

Brian Ellis <[log in to unmask]>

Fri, 26 Nov 1999 19:33:27 +0200

83 lines

Re: SIR

Bev Christian <[log in to unmask]>

Fri, 26 Nov 1999 12:55:06 -0600

392 lines

Re: SIR

Werner Engelmaier <[log in to unmask]>

Sun, 28 Nov 1999 20:20:22 EST

54 lines

Re: SIR

Bev Christian <[log in to unmask]>

Mon, 29 Nov 1999 07:21:06 -0600

264 lines

Re: SIR

Delsen Testing Laboratories <[log in to unmask]>

Mon, 29 Nov 1999 16:08:09 -0800

39 lines

New Thread

SMD ceramic cap on metal substrate

SMD ceramic cap on metal substrate

Ken Fong <[log in to unmask]>

Thu, 11 Nov 1999 17:53:46 GMT

34 lines

Re: SMD ceramic cap on metal substrate

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 11 Nov 1999 14:52:14 +0100

43 lines

Re: SMD ceramic cap on metal substrate

Werner Engelmaier <[log in to unmask]>

Thu, 11 Nov 1999 11:26:09 EST

40 lines

Re: SMD ceramic cap on metal substrate

David Whalley <[log in to unmask]>

Thu, 11 Nov 1999 18:33:25 +0000

65 lines

Re: SMD ceramic cap on metal substrate

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 12 Nov 1999 08:48:51 +0100

52 lines

New Thread

SMD shield damaging parts thru Reflow?

SMD shield damaging parts thru Reflow?

Michael Forrester <[log in to unmask]>

Thu, 11 Nov 1999 12:29:12 -0500

48 lines

Re: SMD shield damaging parts thru Reflow?

Phil Bavaro <[log in to unmask]>

Thu, 11 Nov 1999 09:55:58 -0800

89 lines

Re: SMD shield damaging parts thru Reflow?

Lustig, Steven K.. <[log in to unmask]>

Thu, 11 Nov 1999 13:04:16 -0500

99 lines

New Thread

SMD solder voids

SMD solder voids

Wanner Bernhard <[log in to unmask]>

Fri, 12 Nov 1999 15:19:15 +0100

94 lines

SMD solder voids

Jeff Hempton <[log in to unmask]>

Mon, 15 Nov 1999 13:10:43 -0500

177 lines

New Thread

Solder Joint Reliability

Solder Joint Reliability

Werner Engelmaier <[log in to unmask]>

Fri, 12 Nov 1999 17:43:10 EST

56 lines

New Thread

Solder Paste Dispensing

Solder Paste Dispensing

Vinit Verma <[log in to unmask]>

Thu, 4 Nov 1999 04:31:30 +0000

40 lines

Re: Solder Paste Dispensing

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 3 Nov 1999 14:21:28 +0100

44 lines

Re: Solder Paste Dispensing

Ahne Oosterhof <[log in to unmask]>

Wed, 3 Nov 1999 08:34:12 -0800

72 lines

Re: Solder Paste Dispensing

Paul Klasek <[log in to unmask]>

Thu, 4 Nov 1999 08:37:28 +1100

92 lines

Re: Solder Paste Dispensing

Michael Fenner <[log in to unmask]>

Wed, 3 Nov 1999 21:28:25 -0000

83 lines

Re: Solder Paste Dispensing

Paul Klasek <[log in to unmask]>

Thu, 4 Nov 1999 09:25:33 +1100

127 lines

New Thread

Solder paste height

Solder paste height

John Harris <[log in to unmask]>

Tue, 9 Nov 1999 09:14:03 +1100

37 lines

Re: Solder paste height

d. terstegge <[log in to unmask]>

Tue, 9 Nov 1999 10:46:25 +0100

68 lines

New Thread

Solderability Measurement

Solderability Measurement

Louis Hart <[log in to unmask]>

Tue, 2 Nov 1999 10:59:45 -0500

37 lines

Re: Solderability Measurement

Howieson, Rick <[log in to unmask]>

Tue, 2 Nov 1999 09:11:16 -0700

62 lines

Re: Solderability Measurement

Bev Christian <[log in to unmask]>

Tue, 2 Nov 1999 10:13:45 -0600

177 lines

Re: Solderability Measurement

David Hillman <[log in to unmask]>

Tue, 2 Nov 1999 13:32:33 -0600

60 lines

New Thread

Solderability Procedure for White Tin

Solderability Procedure for White Tin

Mike Bailey <[log in to unmask]>

Wed, 3 Nov 1999 17:26:39 -0800

33 lines

Re: Solderability Procedure for White Tin

David Hillman <[log in to unmask]>

Thu, 4 Nov 1999 07:12:42 -0600

61 lines

New Thread

Soldering Stranded Wires

Soldering Stranded Wires

Miguel Vallejo <[log in to unmask]>

Fri, 5 Nov 1999 23:57:17 -0800

31 lines

Re: Soldering Stranded Wires

Charles Barker <[log in to unmask]>

Mon, 8 Nov 1999 09:52:58 -0600

94 lines

Re: Soldering Stranded Wires

Blomberg, Rainer (FL51) <[log in to unmask]>

Tue, 9 Nov 1999 10:03:26 -0500

95 lines

Re: Soldering Stranded Wires

Dieselberg, Ron <[log in to unmask]>

Wed, 10 Nov 1999 07:40:19 -0500

62 lines

New Thread

Soldermask Touchup

Soldermask Touchup

Scott Kivi <[log in to unmask]>

Mon, 29 Nov 1999 12:32:03 EST

41 lines

New Thread

Solvent for Silicones

Re: Solvent for Silicones

Davis, Mary M. <[log in to unmask]>

Fri, 5 Nov 1999 14:53:48 -0800

72 lines

New Thread

SPC

SPC

Louis Hart <[log in to unmask]>

Tue, 2 Nov 1999 10:47:17 -0500

53 lines

New Thread

SPC Information

SPC Information

Isaac Jeff <[log in to unmask]>

Wed, 24 Nov 1999 18:03:21 +1100

60 lines

Re: SPC Information

Ed Cosper <[log in to unmask]>

Wed, 24 Nov 1999 08:22:36 -0500

105 lines

Re: SPC Information

Cash, Alan <[log in to unmask]>

Wed, 24 Nov 1999 09:37:27 -0500

136 lines

Re: SPC Information

Lou Hart <[log in to unmask]>

Mon, 29 Nov 1999 12:02:44 -0500

138 lines

Re: SPC Information

Neil Atkinson <[log in to unmask]>

Tue, 30 Nov 1999 08:10:42 -0000

190 lines

Re: SPC Information

Bob Dube <[log in to unmask]>

Tue, 30 Nov 1999 16:48:15 -0500

683 lines

New Thread

SPC programs, how make the best use of the efforts..

Re: SPC programs, how make the best use of the efforts..

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 1 Nov 1999 10:21:23 +0100

42 lines

Re: SPC programs, how make the best use of the efforts..

Carey Pico <[log in to unmask]>

Mon, 1 Nov 1999 11:18:56 -0800

81 lines

Re: SPC programs, how make the best use of the efforts..

Richard Mark Mazzoli <[log in to unmask]>

Mon, 1 Nov 1999 15:58:58 EST

33 lines

Re: SPC programs, how make the best use of the efforts..

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 2 Nov 1999 08:29:06 +0100

40 lines

New Thread

SPC software

SPC software

Tuan Le <[log in to unmask]>

Wed, 17 Nov 1999 16:40:19 -0800

66 lines

Re: SPC software

<Janice LePage> <[log in to unmask]>

Wed, 17 Nov 1999 17:21:41 -0800

85 lines

Re: SPC software

Lou Hart <[log in to unmask]>

Thu, 18 Nov 1999 08:21:10 -0500

58 lines

Re: SPC software

David Hipp <[log in to unmask]>

Thu, 18 Nov 1999 08:24:15 -0600

48 lines

Re: SPC software

Tuan Le <[log in to unmask]>

Thu, 18 Nov 1999 07:26:50 -0800

130 lines

Re: SPC software

Timothy Reeves <[log in to unmask]>

Thu, 18 Nov 1999 09:57:52 -0800

51 lines

Re: SPC software

Lourdes White <[log in to unmask]>

Thu, 18 Nov 1999 14:42:02 EST

37 lines

Re: SPC software

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 19 Nov 1999 08:30:47 +0100

42 lines

Re: SPC software

McMonagle, Michael R. <[log in to unmask]>

Fri, 19 Nov 1999 07:17:54 -0600

67 lines

New Thread

Speaking of Adhesion of Conformal Coating

Speaking of Adhesion of Conformal Coating

Kenny Bloomquist <[log in to unmask]>

Fri, 19 Nov 1999 06:54:24 -0800

34 lines

Re: Speaking of Adhesion of Conformal Coating

Louis, Edwin @ CSE <[log in to unmask]>

Fri, 19 Nov 1999 12:37:25 -0500

62 lines

Re: Speaking of Adhesion of Conformal Coating

Graham Naisbitt <[log in to unmask]>

Mon, 22 Nov 1999 12:58:17 -0000

99 lines

Re: Speaking of Adhesion of Conformal Coating

Kenny Bloomquist <[log in to unmask]>

Mon, 22 Nov 1999 10:35:01 -0800

131 lines

New Thread

spiders and automation

Re: spiders and automation

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 19 Nov 1999 09:23:09 +0100

231 lines

New Thread

stacked CSP

stacked CSP

Parvez M.S. Patel <[log in to unmask]>

Tue, 30 Nov 1999 13:31:08 -0500

38 lines

Re: stacked CSP

Dr. Jerome S Sallo <[log in to unmask]>

Tue, 30 Nov 1999 14:04:41 EST

30 lines

Re: stacked CSP

ajheidelberg <[log in to unmask]>

Tue, 30 Nov 1999 12:57:43 -0700

61 lines

New Thread

Steve and Fred Day! (was [TN] "RE: Finish NT Domain Conversion" )

Steve and Fred Day! (was [TN] "RE: Finish NT Domain Conversion" )

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 5 Nov 1999 17:55:03 -0500

38 lines

New Thread

Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack))

Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack))

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 5 Nov 1999 15:53:20 -0000

60 lines

Re: Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack))

West, Jim <[log in to unmask]>

Fri, 5 Nov 1999 11:16:58 -0500

87 lines

Re: Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack))

Hamilton, Richard CLE 4454 <[log in to unmask]>

Fri, 5 Nov 1999 09:32:34 -0700

92 lines

Re: Steve Day! (was RE: [TN] QFP Tray Packaging...(deslexia attack))

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 5 Nov 1999 17:05:21 -0000

129 lines

New Thread

Subscribing

Subscribing

IPC <[log in to unmask]>

Mon, 8 Nov 1999 16:16:58 -0800

24 lines

New Thread

substrate club

substrate club

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 1 Nov 1999 09:06:30 +0100

32 lines

New Thread

Sulfuric Acid - Maximum allowed by Fire Code.

Sulfuric Acid - Maximum allowed by Fire Code.

Dan Brandler <[log in to unmask]>

Tue, 30 Nov 1999 16:37:01 -0800

42 lines

New Thread

SV: [TN] SPC software

SV: [TN] SPC software

Jørgen Planck Larsen <[log in to unmask]>

Thu, 18 Nov 1999 16:52:12 +0100

55 lines

New Thread

Tapered Voids

Re: Tapered Voids

Erat, Wolfgang <[log in to unmask]>

Mon, 1 Nov 1999 08:54:57 -0500

64 lines

New Thread

Tarnish after resist stripping

Tarnish after resist stripping

Rudy Sedlak <[log in to unmask]>

Tue, 23 Nov 1999 09:37:28 EST

53 lines

Re: Tarnish after resist stripping

Rod Semen <[log in to unmask]>

Tue, 23 Nov 1999 07:37:42 PST

89 lines

Re: Tarnish after resist stripping

Stephen R. Gregory <[log in to unmask]>

Tue, 23 Nov 1999 10:57:20 EST

32 lines

Re: Tarnish after resist stripping

Severson, Scott M. <[log in to unmask]>

Tue, 23 Nov 1999 09:58:52 -0600

131 lines

Re: Tarnish after resist stripping

Greysonne Jorgenson <[log in to unmask]>

Tue, 23 Nov 1999 08:09:36 PST

48 lines

Re: Tarnish after resist stripping

Chuck Brummer <[log in to unmask]>

Tue, 23 Nov 1999 08:18:29 -0800

79 lines

Re: Tarnish after resist stripping

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Tue, 23 Nov 1999 16:37:10 -0000

108 lines

Re: Tarnish after resist stripping

Chuck Brummer <[log in to unmask]>

Tue, 23 Nov 1999 08:39:33 -0800

114 lines

Re: Tarnish after resist stripping

Greysonne Jorgenson <[log in to unmask]>

Tue, 23 Nov 1999 08:55:57 PST

38 lines

Re: Tarnish after resist stripping

[log in to unmask]

Tue, 23 Nov 1999 12:02:14 EST

114 lines

Re: Tarnish after resist stripping

Ed Cosper <[log in to unmask]>

Tue, 23 Nov 1999 12:07:05 -0500

97 lines

Re: Tarnish after resist stripping

Eric Kalgren <[log in to unmask]>

Tue, 23 Nov 1999 10:44:42 -0700

112 lines

Re: Tarnish after resist stripping

[log in to unmask]

Tue, 23 Nov 1999 13:06:37 EST

56 lines

Re: Tarnish after resist stripping

Jim Douglas <[log in to unmask]>

Tue, 23 Nov 1999 18:36:06 -0000

117 lines

New Thread

Tarnish after resist stripping II

Tarnish after resist stripping II

Rudy Sedlak <[log in to unmask]>

Tue, 23 Nov 1999 11:22:30 EST

35 lines

New Thread

Test

Test

wmlee1 <[log in to unmask]>

Sat, 6 Nov 1999 00:56:21 +0800

48 lines

Test

Debbie Kenney <[log in to unmask]>

Mon, 8 Nov 1999 09:36:07 -0800

24 lines

test

IPC <[log in to unmask]>

Mon, 8 Nov 1999 13:29:35 -0800

23 lines

Test

Alan Kreplick <[log in to unmask]>

Mon, 8 Nov 1999 17:41:25 -0500

24 lines

New Thread

Test message

Test message

Isaac Jeff <[log in to unmask]>

Wed, 24 Nov 1999 16:37:26 +1100

28 lines

New Thread

Test, please ignore

Test, please ignore

Isaac Jeff <[log in to unmask]>

Wed, 17 Nov 1999 10:27:19 +1100

28 lines

New Thread

testing

testing

Quang Nguyen <[log in to unmask]>

Mon, 8 Nov 1999 10:39:59 -0800

24 lines

New Thread

testing for our company

testing for our company

IPC <[log in to unmask]>

Tue, 9 Nov 1999 08:05:45 -0800

23 lines

New Thread

testing my enrollment

testing my enrollment

IPC E-Box <[log in to unmask]>

Tue, 9 Nov 1999 13:03:19 -0800

24 lines

New Thread

Thank you ......Wrist wraps......

Re: Thank you ......Wrist wraps......

d. terstegge <[log in to unmask]>

Mon, 8 Nov 1999 09:41:10 +0100

178 lines

New Thread

Thanks for help: Ku-band waveguide gasket

Thanks for help: Ku-band waveguide gasket

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 23 Nov 1999 08:40:15 +0100

40 lines

New Thread

Thanks for the support

Thanks for the support

Rudy Sedlak <[log in to unmask]>

Tue, 23 Nov 1999 17:55:35 EST

31 lines

New Thread

Thanks: Ku-band waveguide gasket

Thanks: Ku-band waveguide gasket

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 19 Nov 1999 14:21:31 +0100

45 lines

New Thread

The Case of Corrosion after Wave Flow Soldering Affair

The Case of Corrosion after Wave Flow Soldering Affair

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 3 Nov 1999 22:12:18 -0000

69 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

David Hillman <[log in to unmask]>

Wed, 3 Nov 1999 16:51:32 -0600

98 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Rudy Sedlak <[log in to unmask]>

Wed, 3 Nov 1999 18:24:47 EST

44 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 4 Nov 1999 16:42:04 -0500

64 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 4 Nov 1999 21:40:59 -0000

87 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Carey Pico <[log in to unmask]>

Thu, 4 Nov 1999 13:54:05 -0800

66 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

David Hillman <[log in to unmask]>

Thu, 4 Nov 1999 16:17:33 -0600

27 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Rudy Sedlak <[log in to unmask]>

Thu, 4 Nov 1999 19:14:08 EST

35 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

David Hillman <[log in to unmask]>

Fri, 5 Nov 1999 05:34:47 -0600

66 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 5 Nov 1999 13:27:41 -0500

61 lines

Re: The Case of Corrosion after Wave Flow Soldering Affair

Carey Pico <[log in to unmask]>

Fri, 5 Nov 1999 12:24:05 -0800

59 lines

New Thread

Tin vs. Tin/Lead solder

Tin vs. Tin/Lead solder

Rudy Sedlak <[log in to unmask]>

Fri, 5 Nov 1999 09:49:42 EST

54 lines

Re: Tin vs. Tin/Lead solder

David Hillman <[log in to unmask]>

Fri, 5 Nov 1999 14:01:24 -0600

80 lines

Re: Tin vs. Tin/Lead solder

Carey Pico <[log in to unmask]>

Fri, 5 Nov 1999 14:47:20 -0800

136 lines

Re: Tin vs. Tin/Lead solder

joyce <[log in to unmask]>

Fri, 5 Nov 1999 19:34:00 -0500

88 lines

Re: Tin vs. Tin/Lead solder

Rudy Sedlak <[log in to unmask]>

Sun, 7 Nov 1999 21:51:40 EST

38 lines

Re: Tin vs. Tin/Lead solder

joyce <[log in to unmask]>

Sun, 7 Nov 1999 22:35:57 -0500

67 lines

New Thread

TN Dispensing of conductive adhesives for flipchip attac h

Re: TN Dispensing of conductive adhesives for flipchip attac h

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 24 Nov 1999 11:49:47 +0100

46 lines

New Thread

Translation

Translation

Sabine McGowan <[log in to unmask]>

Fri, 12 Nov 1999 15:30:00 -0500

33 lines

Re: Translation

Matthias Mansfeld <[log in to unmask]>

Fri, 12 Nov 1999 22:35:48 +0100

70 lines

Re: Translation

Kelly M. Schriver <[log in to unmask]>

Fri, 12 Nov 1999 15:40:57 -0600

62 lines

Re: Translation

Brian Ellis <[log in to unmask]>

Sat, 13 Nov 1999 13:01:48 +0200

83 lines

Re: Translation

Graham Naisbitt <[log in to unmask]>

Mon, 15 Nov 1999 15:52:45 -0000

103 lines

New Thread

Type of Circuitry

Type of Circuitry

Ed Cosper <[log in to unmask]>

Mon, 15 Nov 1999 14:12:30 -0500

67 lines

Re: Type of Circuitry

Bob Jacubec <[log in to unmask]>

Mon, 15 Nov 1999 16:05:09 -0500

35 lines

Re: Type of Circuitry

Phil Crepeau <[log in to unmask]>

Mon, 15 Nov 1999 13:03:32 -0800

45 lines

Type of Circuitry

Creswick <[log in to unmask]>

Mon, 15 Nov 1999 17:41:41 -0500

27 lines

Type of Circuitry

Creswick <[log in to unmask]>

Mon, 15 Nov 1999 22:04:18 -0500

28 lines

Re: Type of Circuitry

Matthew Lamkin <[log in to unmask]>

Tue, 16 Nov 1999 10:56:21 -0000

27 lines

Re: Type of Circuitry

Ed Cosper <[log in to unmask]>

Tue, 16 Nov 1999 08:13:18 -0500

63 lines

New Thread

UL and/or Vendor Logos

Re: UL and/or Vendor Logos

Timothy Reeves <[log in to unmask]>

Tue, 30 Nov 1999 09:47:48 -0800

70 lines

New Thread

UV Conformal Coatings

UV Conformal Coatings

Peter Wong <[log in to unmask]>

Tue, 2 Nov 1999 11:39:26 -0800

73 lines

Re: UV Conformal Coatings

Zajko, Robert A (PA62) <[log in to unmask]>

Tue, 2 Nov 1999 13:02:50 -0700

54 lines

New Thread

Vacuum drying.

Vacuum drying.

TOE /Torben Østeraa <[log in to unmask]>

Mon, 29 Nov 1999 16:05:25 +0100

41 lines