LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


September 1999


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"OEM" Refurbished Equipment(not brokers) (9 messages)
(TN) Ionograph pass/fail limit? (1 message)
0402 Land Patterns? (3 messages)
3rd party component testing (4 messages)
: Solder Balls in the Via-holes (1 message)
: Solder Balls in the Via-holes -Reply (1 message)
<No subject given> (1 message)
<No subject> (8 messages)
A simple question... (3 messages)
A simple question... [BGA] (1 message)
acceptable solder joint shear strength? (4 messages)
Acrylic Conformal Remover - Thanks! (2 messages)
Active/non-active flux. (2 messages)
address of Carolina Circuits (4 messages)
Advances in Cleaning of NO Cleans (3 messages)
Alpha Metals UP-78 (2 messages)
Alternative Oxides (2 messages)
Ammoniacal vs Cupric chloride Etcher. (10 messages)
Ammonium Sulfate vs Ammonium Chloride Etchant (1 message)
Another question of the day... (7 messages)
Another SEARCHIN' question of the day... (2 messages)
ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PR... (1 message)
ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PROCESSING (2 messages)
Any Opinion? (4 messages)
Assembly Estimate Package (4 messages)
ATT Microelectronics or Lucent (3 messages)
Attachments/Virus (1 message)
B-stage,C-stage? (2 messages)
Baking SOIC packages to dry them prior to reflow solder (10 messages)
Bartlett Manufacturing (3 messages)
Benchmark Pricing (1 message)
BGA Guidelines (5 messages)
BGA micro-blind vias (5 messages)
BGA site preparation after parts removal. (4 messages)
BGA voids (4 messages)
Biomaterials for electronics (1 message)
Bleed-out (3 messages)
Board house repairing broken tr (1 message)
Board house repairing broken trace (3 messages)
Bonding rigid boards (3 messages)
Bottom Side reflow. (5 messages)
Brushing after wave (4 messages)
BT Laminate (4 messages)
Call for Papers (1 message)
Carbon ink info. (1 message)
Chip-on-board Subcontractors (2 messages)
Cleaning of Boards at Board Manufacturer (2 messages)
Cleaning of misprint glue (2 messages)
Clogging dispenser (cont'd) (2 messages)
Clogging dispensers soon... (13 messages)
Clogging dispensers, free pictures with Ingemar (1 message)
Clogging dispensers, need an eye or two (3 messages)
COB technology (3 messages)
COB,FP,TAB (6 messages)
COB,FP,TAB/Wire bond/plasma clean (2 messages)
Column Grid Array (4 messages)
communication between design and manufacture (5 messages)
Company ? (5 messages)
component solderability (5 messages)
Conformal coating machines etc ? (7 messages)
Conformal coating machines etc ? (addition) (3 messages)
Contamination limits on plated SMT devices (1 message)
Coplanarity spec for BGA & QFP? (3 messages)
Copper Clad Laminate Slippage (5 messages)
copper foil (1 message)
coverlay: slots/vs holes (1 message)
Cracking PCB's (2 messages)
CTE for FR4; was Woh Nelco (2 messages)
Cupric vs. Ammonium Etchants (1 message)
CVS (2 messages)
DC 160, electromigration (3 messages)
Depaneling Machine ?? (1 message)
detect method on nick or dish down circuit. (urgent) (1 message)
detect method on nick or dish down circuit.(urgent) (1 message)
Different of Solderability Test (2 messages)
Dispensers (1 message)
DOE & SPC Recommendations? (3 messages)
Drilling benchmark report (1 message)
Dry Film Mask Issues... (4 messages)
Dryfilm mask adhesion, the saga continues... (10 messages)
Dryfilm mask adhesion, the saga continues... -Reply (2 messages)
Dull finish around holes in Cu plating (4 messages)
E-testing New Method (1 message)
Electrical Breakdown, O2 vs. N2? (2 messages)
electrical component solderability (3 messages)
Electrical measurement labs (1 message)
Electro-mechanical connections for Power Applications (1 message)
Epoxy (clear or black) wicking on leads? How to control and and possible root causes. (3 messages)
Epoxy (clear or black) wicking on leads? How to controland possible root causes. (1 message)
ESD and SMT Tape/Reels - Concern (10 messages)
Exposed basis material (2 messages)
Facility/organization that repairs a Malcom Viscometer (PCU-203) (1 message)
Fiducials (11 messages)
Filtering incoming mail (10 messages)
Filtering mail (1 message)
flex circuit advice (3 messages)
Flex circuit terms (4 messages)
Flux activity (2 messages)
Flux Dye (3 messages)
Flux Removal with MEK (14 messages)
Fluxless soldering (AuSn) with SMT reflow ovens (3 messages)
Fudicial Shape (7 messages)
Fw: Cleaning of Boards at Board Manufacturer (3 messages)
FW: OLD PEOPLE (1 message)
FW: Old People!! :) (1 message)
Fw: Returned mail: User unknown (2 messages)
FW: Subj: Poor Wetting/Solderability/Contamination/???? (1 message)
FW: Susceptibility of surface finishes to skin oils (5 messages)
FW: [TN] Bottom Side reflow. (1 message)
FW: [TN] Woh Nelco............. (3 messages)
FW:MIL-STD-100 vs ASME Y14.100 (1 message)
GC-PLACE & GC-ICT (1 message)
Gerber file viewer (13 messages)
gerber file viewer link (6 messages)
Gerber to CAD (3 messages)
Gerber v/s Netlist (IPC 356) (4 messages)
Gerneric copper anode spec? (2 messages)
Gold stud bumping/Coining (1 message)
Handling Trays (3 messages)
HASL... (8 messages)
HASL/Tin (2 messages)
Height of BGA's after reflow (1 message)
HELP! (4 messages)
HELP! [contact surface force] (1 message)
HELP!- heat sinks (1 message)
Here's what I mean (1 message)
HISTACK, IBM-type, japs (10 messages)
Hot: Copper plating thickness (6 messages)
Hot: Copper plating thickness -Reply (3 messages)
Hot: Copper plating thickness -Reply -Reply (2 messages)
how to improve plating distribution (2 messages)
I need a domestic packaging house (3 messages)
I need outside cam service contacts. (6 messages)
I've got blisters on my what???!!!!!!???? (1 message)
Immersion Gold - How to specify? (6 messages)
In-Line Cleaners & IR Heaters (2 messages)
Including original message in responses - NOT (19 messages)
INCREASE YIELDS! - TROUBLESHOOT THE PWB MANUFACTURING PROCESS (1 message)
Indium plating? (3 messages)
Industry Standard For Tracking SPQL (1 message)
Info on 01/02 devices needed (1 message)
Info on Ceramic PCB's needed (2 messages)
Information of Sn/Pb plating thickness (2 messages)
Internal fab shorts that happen over time. (1 message)
Internal fab shorts that happen over time... (13 messages)
Internal fab shorts that happen over time... -Reply (1 message)
Internal Fab Shorts...a follow-up... (9 messages)
ionic contamination testing of circuit boards. (2 messages)
IPC 610B FILLET (2 messages)
IPC and Bellcore specs (6 messages)
IR Reflow Replacement (2 messages)
ISA PC Card finger connector (1 message)
isola cobrisol laminate (3 messages)
Job opening in Ireland for PCB Designer (1 message)
Laboratories Capable of Performing IPC-TM-650, 2.3.38 (2 messages)
laminate voids (2 messages)
Larger parts on smaller pads... (1 message)
ListServer.....is it just me, or? (2 messages)
log off (1 message)
Looking for Quad 100 12mm Feeder parts. (1 message)
low tack adhesive (1 message)
Mark Mazzoli (2 messages)
maximum current on pcb (1 message)
maximum solder joint thickness (11 messages)
maximum solder joint thickness ( Werners comments ) (3 messages)
maximun current on pcb (3 messages)
Measuring conformal coat (4 messages)
Measuring copper thickness @ in (2 messages)
Measuring copper thickness @ incoming inspection (4 messages)
Merging Gerber Files (2 messages)
Micro VIA's (3 messages)
Mil Spec Conversion (3 messages)
MIL-STD-100 (1 message)
Moire interferometry (2 messages)
Moisture Proof Encapsulation (7 messages)
More questions about Test facilities (2 messages)
Motorola TBGA480 (1 message)
Multilayer SMT Voltage Suppressor (2 messages)
MULTILAYERS DRILLING CORRECTION (1 message)
Napco Vacuum Oven (3 messages)
Need coax connector with tight tolerance in z direction (4 messages)
NEED SOME INPUTS (5 messages)
Need to know (7 messages)
New Equipment - Flat Brush Scrubber (2 messages)
Nick cicruit or dish down cicuit comment? (2 messages)
No Chromate Test, but an alternate (2 messages)
No contact test system (2 messages)
Non-technical question (5 messages)
Nontechnical question (1 message)
Not read: [TN] Thermode soldering (1 message)
Okay, try not to laugh... (8 messages)
Ol Maildemon Played Gotcha (1 message)
Omegameter Question (1 message)
Organizational Meeting, Smoky Mountain Designers Council (1 message)
OSP'S (2 messages)
Overcooked latex residues (1 message)
Oz of Copper v/s surface area (6 messages)
Packaging House (1 message)
Packaging machines (1 message)
Pad Sizes for good solder Joints (2 messages)
Pad Sizing (1 message)
Part numbering system (14 messages)
pc 101 (2 messages)
PCB (PWB For the USA) Manufacturers (7 messages)
PCB design shops (5 messages)
pcb manufacturers (26 messages)
PCB Manufacturers -Reply (1 message)
PCB Manufacturers following/contributing to TechNet (1 message)
PCB related reading material (1 message)
PCB use 1 OZ & H OZ copper (6 messages)
PCB's for lead free soldering (1 message)
Peelable Solder Mask (2 messages)
Phosphorus content in Electroless Nickel (4 messages)
Pick 'n' Place machines (1 message)
Pick N Place Equipment (8 messages)
Pick N Place Equipment and 0402's (1 message)
Pick N Place Equipment and 0402's But Different Question (1 message)
Plasma and PTFE (4 messages)
Plasma cleaning (2 messages)
Plating and pattern plating (2 messages)
Platinum Plating (3 messages)
PLT file ??? (7 messages)
Poor solderability (6 messages)
Pre-Tinning Fine Pitch... (9 messages)
Pre-tinning gold leads (1 message)
precision mini-drill-press (5 messages)
Press Fit Light Pipe Ass'y (1 message)
Press-fit connector... (1 message)
PRICE Algorithm (1 message)
Process capability (4 messages)
PROCESS CAPABILITY AND REPEATABILITY STUDY (2 messages)
PWB edge contact metallization (2 messages)
Question of the day (2 messages)
Question of the day... (10 messages)
Quick chromate test (1 message)
Quick Prototype (2 messages)
Quick, Chromate Test (5 messages)
Rack stripping (1 message)
Re0.2mm (1 message)
Reliability of BGA vs. J-leaded devices (1 message)
Repair: Trace Weld on the fab (2 messages)
Resin Starvation (3 messages)
Resisitivity change in conductive adhesives (5 messages)
RF-silver epoxy (4 messages)
ROI (1 message)
routing for THICK copper plate. (3 messages)
Sample size for board level solder joint test (3 messages)
SANYO E-CSP packages (1 message)
Sheet resistance Vs resistivity (3 messages)
Signal Integrity (4 messages)
SIGNOFF TECHNET (1 message)
Silicon and eletronic production (3 messages)
Silicone migration (1 message)
SMOBC Explain (3 messages)
Solder balls/beads in via-hole. (1 message)
Solder Joint Failure Mode Survey (1 message)
solder joint reliability prediction models (5 messages)
Solder Mask between pads... (2 messages)
solder paste profiles (1 message)
Solder prophile for BGA352 (1 message)
Solder sample v/s good bd for micro-sectioning (7 messages)
solderability of PTFE Taconic material boards (8 messages)
Solderability of tin/lead plating (7 messages)
Soldering .5 mm flat flex to PCB (4 messages)
Soldering BGA-352 (6 messages)
soldering to immersion gold boards (7 messages)
Standard Reference Designations (4 messages)
Std Impedance Test Coupon (2 messages)
Stenciling Glue (2 messages)
straightening QFP pins (7 messages)
stripping (2 messages)
Subj: 0402 Technology (2 messages)
Subj: Poor Wetting/Solderability/Contamination/???? (4 messages)
subscribe (1 message)
Supplier(s) of 0402 caps (7 messages)
Supported, unsupported & PTH (3 messages)
Surface finishing (6 messages)
Surface finishing -Reply (7 messages)
temporary solder mask reply (1 message)
thanks!!!! (1 message)
the price of solder paste (9 messages)
ThermaFlo 5 (1 message)
Thermal Cycle Test (6 messages)
Thermal Cycle Test -Reply (1 message)
Thermocouple wiring (2 messages)
thinnest stencil (5 messages)
tin coated leads (3 messages)
Tin Whiskers (1 message)
Tombstoning (4 messages)
Trace and Pad to Clinched Lead Clearance (1 message)
Trace width & etch compensation factor (2 messages)
Transparency of solder mask silkscreen set up (1 message)
Treiber cleaners (5 messages)
Ultrasonic cleaning (1 message)
Ultrasonic PCB cleaning (9 messages)
Universal symbols (2 messages)
unmasking vias (7 messages)
Vacuum Sealing Equipment?? (2 messages)
vapor degreasers (7 messages)
Vapour Phase vs Convection Reflow (2 messages)
Via holes under BGAs (2 messages)
Via in BGA Pad? (6 messages)
Vibration (1 message)
VIRUS ALERT (2 messages)
Warp and Twist (2 messages)
Warpage on a thin PCB (1 message)
Warped PCB's (5 messages)
Was: Blister Pictures, Now: "I got dem' ol Dry-film blues baybuh" (1 message)
Water-soluble ink marking system (3 messages)
Wave Solder Operator Wages (1 message)
Wave Solder Operator Wages... (2 messages)
Wave soldering (8 messages)
What is rambus? (3 messages)
what is super solder technology on the bump pad? (2 messages)
what is the 'semi additive process'? (3 messages)
Where is Citation Circuits (2 messages)
Whiskers Problem on Leadframes (3 messages)
White substance (1 message)
Why are files called Gerber files. (5 messages)
Why NOT to wave solder press-fits... (1 message)
Wire bonding (2 messages)
Wire bonding question (8 messages)
Woh Nelco............. (2 messages)
X.400 Inter-Personal Notification (1 message)
You tell two friends, and they tell two friends, and so on, and so on, and so on..... (1 message)
[PCD] Communication between design and manufacturing (2 messages)
[RE]Why happen Measling (1 message)
[TN ] log off (1 message)
[TN] 회신: [TN] New email (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

pod <[log in to unmask]>

Fri, 3 Sep 1999 14:17:04 -0500

78 lines

Re:

Werner Engelmaier <[log in to unmask]>

Fri, 3 Sep 1999 17:01:32 EDT

38 lines

Re:

Guenter Grossmann <[log in to unmask]>

Mon, 6 Sep 1999 11:22:05 +0200

55 lines

Re:

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 6 Sep 1999 09:11:22 +0200

67 lines

Re:

Rudy Sedlak <[log in to unmask]>

Fri, 17 Sep 1999 11:07:09 EDT

31 lines

Re:

Mark Mazzoli <[log in to unmask]>

Wed, 22 Sep 1999 16:03:30 -0400

81 lines

Re:

[log in to unmask]

Wed, 22 Sep 1999 16:24:35 EDT

30 lines

Re:

Rudy Sedlak <[log in to unmask]>

Wed, 22 Sep 1999 22:18:36 EDT

49 lines

Re:

Carey Pico <[log in to unmask]>

Thu, 30 Sep 1999 12:11:18 -0700

133 lines

New Thread

"OEM" Refurbished Equipment(not brokers)

"OEM" Refurbished Equipment(not brokers)

West, Jim <[log in to unmask]>

Wed, 1 Sep 1999 13:25:52 -0400

37 lines

Re: "OEM" Refurbished Equipment(not brokers)

Scott Mcanall <[log in to unmask]>

Wed, 1 Sep 1999 13:36:18 EDT

30 lines

Re: "OEM" Refurbished Equipment(not brokers)

Collins, Graham <[log in to unmask]>

Wed, 1 Sep 1999 14:37:45 -0300

72 lines

Re: "OEM" Refurbished Equipment(not brokers)

Stephen R. Gregory <[log in to unmask]>

Wed, 1 Sep 1999 13:40:00 EDT

48 lines

Re: "OEM" Refurbished Equipment(not brokers)

McMonagle, Michael R. <[log in to unmask]>

Wed, 1 Sep 1999 12:39:20 -0500

76 lines

Re: "OEM" Refurbished Equipment(not brokers)

Phil Zarrow <[log in to unmask]>

Wed, 1 Sep 1999 13:52:31 EDT

45 lines

Re: "OEM" Refurbished Equipment(not brokers)

Hamilton, Richard CLE 4454 <[log in to unmask]>

Wed, 1 Sep 1999 10:58:22 -0700

89 lines

Re: "OEM" Refurbished Equipment(not brokers)

Thomas Han <[log in to unmask]>

Wed, 1 Sep 1999 11:29:55 -0700

62 lines

Re: "OEM" Refurbished Equipment(not brokers)

Jon Moore <[log in to unmask]>

Fri, 3 Sep 1999 12:11:54 EDT

35 lines

New Thread

(TN) Ionograph pass/fail limit?

(TN) Ionograph pass/fail limit?

[log in to unmask]

Wed, 29 Sep 1999 10:09:24 EDT

48 lines

New Thread

0402 Land Patterns?

0402 Land Patterns?

McMonagle, Michael R. <[log in to unmask]>

Thu, 23 Sep 1999 12:59:00 -0500

48 lines

Re: 0402 Land Patterns?

Ryan Grant <[log in to unmask]>

Fri, 24 Sep 1999 08:31:05 -0600

83 lines

Re: 0402 Land Patterns?

McMonagle, Michael R. <[log in to unmask]>

Fri, 24 Sep 1999 10:23:40 -0500

140 lines

New Thread

3rd party component testing

3rd party component testing

Landes, Jeff <[log in to unmask]>

Mon, 20 Sep 1999 09:42:13 -0400

33 lines

Re: 3rd party component testing

joyce <[log in to unmask]>

Mon, 20 Sep 1999 21:22:21 -0400

59 lines

Re: 3rd party component testing

Phil O'Reilly <[log in to unmask]>

Tue, 21 Sep 1999 10:12:04 -0400

89 lines

Re: 3rd party component testing

Carey Pico <[log in to unmask]>

Mon, 20 Sep 1999 21:44:43 -0700

92 lines

New Thread

: Solder Balls in the Via-holes

: Solder Balls in the Via-holes

Poh Kong Hui <[log in to unmask]>

Thu, 9 Sep 1999 22:14:17 +0800

41 lines

New Thread

: Solder Balls in the Via-holes -Reply

: Solder Balls in the Via-holes -Reply

Charles Pitarys <[log in to unmask]>

Thu, 9 Sep 1999 11:20:43 -0400

67 lines

New Thread

<No subject given>

<No subject given>

Ramsey's <[log in to unmask]>

Sat, 4 Sep 1999 09:45:55 -0400

74 lines

New Thread

<No subject>

<No subject>

Loida F. Valencia <[log in to unmask]>

Wed, 1 Sep 1999 17:20:59 +1100

20 lines

<No subject>

Grant Emandien <[log in to unmask]>

Fri, 3 Sep 1999 12:37:41 +0200

46 lines

<No subject>

Hammad M. Hammad <[log in to unmask]>

Thu, 9 Sep 1999 17:04:31 -0700

55 lines

<No subject>

Jon McDowell <[log in to unmask]>

Fri, 10 Sep 1999 07:28:26 -0600

23 lines

<No subject>

Roger Massey-G14195 <[log in to unmask]>

Fri, 17 Sep 1999 11:29:38 +0100

39 lines

<No subject>

Rod Semen <[log in to unmask]>

Wed, 22 Sep 1999 11:39:29 PDT

30 lines

<No subject>

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 28 Sep 1999 15:04:11 +0200

59 lines

<No subject>

Kasprzak, Bill (esd) US <[log in to unmask]>

Thu, 30 Sep 1999 15:04:00 PDT

91 lines

New Thread

A simple question...

A simple question...

Eric Kalgren <[log in to unmask]>

Wed, 1 Sep 1999 15:07:21 -0600

39 lines

Re: A simple question...

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Wed, 1 Sep 1999 18:56:15 -0400

57 lines

Re: A simple question...

Phil Dutton <[log in to unmask]>

Thu, 2 Sep 1999 10:04:07 +0900

84 lines

New Thread

A simple question... [BGA]

Re: A simple question... [BGA]

Alderete, Michael <[log in to unmask]>

Thu, 2 Sep 1999 10:45:03 -0700

58 lines

New Thread

acceptable solder joint shear strength?

acceptable solder joint shear strength?

Vandendolder, Ron <[log in to unmask]>

Wed, 8 Sep 1999 09:43:07 -0400

35 lines

Re: acceptable solder joint shear strength?

Paul Klasek <[log in to unmask]>

Thu, 9 Sep 1999 12:25:20 +1000

75 lines

Re: acceptable solder joint shear strength?

Werner Engelmaier <[log in to unmask]>

Wed, 8 Sep 1999 22:51:43 EDT

48 lines

Re: acceptable solder joint shear strength?

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 9 Sep 1999 09:22:33 +0200

105 lines

New Thread

Acrylic Conformal Remover - Thanks!

Re: Acrylic Conformal Remover - Thanks!

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Thu, 2 Sep 1999 13:21:40 -0400

46 lines

Re: Acrylic Conformal Remover - Thanks!

Cecilia Alkhagen (EMW) <[log in to unmask]>

Fri, 3 Sep 1999 10:11:20 +0200

72 lines

New Thread

Active/non-active flux.

Active/non-active flux.

Nicholas LAI <[log in to unmask]>

Tue, 14 Sep 1999 08:53:56 +0800

33 lines

Re: Active/non-active flux.

pod <[log in to unmask]>

Tue, 14 Sep 1999 02:22:48 -0700

216 lines

New Thread

address of Carolina Circuits

address of Carolina Circuits

Vandendolder, Ron <[log in to unmask]>

Wed, 15 Sep 1999 16:54:52 -0400

31 lines

Re: address of Carolina Circuits

Motoyo Wajima <[log in to unmask]>

Thu, 16 Sep 1999 08:55:47 +0900

71 lines

Re: address of Carolina Circuits

McFaddin, Wade <[log in to unmask]>

Thu, 16 Sep 1999 07:57:51 -0500

68 lines

Re: address of Carolina Circuits

Thomas Martin <[log in to unmask]>

Thu, 16 Sep 1999 10:10:47 -0400

31 lines

New Thread

Advances in Cleaning of NO Cleans

Advances in Cleaning of NO Cleans

Carl Ray <[log in to unmask]>

Thu, 2 Sep 1999 09:13:41 -0500

34 lines

Re: Advances in Cleaning of NO Cleans

Graham Naisbitt <[log in to unmask]>

Fri, 3 Sep 1999 16:30:45 +0100

108 lines

Re: Advances in Cleaning of NO Cleans

Pat Kane <[log in to unmask]>

Tue, 7 Sep 1999 16:06:02 EDT

113 lines

New Thread

Alpha Metals UP-78

Alpha Metals UP-78

Steffen, Don E <[log in to unmask]>

Tue, 14 Sep 1999 08:44:56 -0500

41 lines

Re: Alpha Metals UP-78

Manon Dutil <[log in to unmask]>

Tue, 14 Sep 1999 10:44:31 -0400

78 lines

New Thread

Alternative Oxides

Alternative Oxides

Rod Semen <[log in to unmask]>

Wed, 29 Sep 1999 22:44:39 PDT

28 lines

Re: Alternative Oxides

George Bokisa <[log in to unmask]>

Thu, 30 Sep 1999 13:17:51 -0700

51 lines

New Thread

Ammoniacal vs Cupric chloride Etcher.

Re: Ammoniacal vs Cupric chloride Etcher.

Lenny Kurup <[log in to unmask]>

Wed, 8 Sep 1999 14:50:49 -0400

28 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Carano,Michael <[log in to unmask]>

Wed, 8 Sep 1999 15:46:13 -0400

61 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Yu-Shan Han <[log in to unmask]>

Wed, 8 Sep 1999 22:08:48 -0700

64 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Mark Mazzoli <[log in to unmask]>

Thu, 9 Sep 1999 07:04:35 -0400

63 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Jim Douglas <[log in to unmask]>

Thu, 9 Sep 1999 14:45:04 +0100

31 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Dr. Jerome S Sallo <[log in to unmask]>

Thu, 9 Sep 1999 10:48:36 EDT

31 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Michael Lester <[log in to unmask]>

Thu, 9 Sep 1999 18:07:59 EDT

25 lines

Re: Ammoniacal vs Cupric chloride Etcher.

[log in to unmask]

Thu, 9 Sep 1999 22:03:23 EDT

32 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Albert Mok <[log in to unmask]>

Fri, 10 Sep 1999 10:06:52 +0800

62 lines

Re: Ammoniacal vs Cupric chloride Etcher.

Jim Douglas <[log in to unmask]>

Fri, 10 Sep 1999 13:06:30 +0100

94 lines

New Thread

Ammonium Sulfate vs Ammonium Chloride Etchant

Re: Ammonium Sulfate vs Ammonium Chloride Etchant

Rudy Sedlak <[log in to unmask]>

Thu, 9 Sep 1999 10:59:22 EDT

30 lines

New Thread

Another question of the day...

Another question of the day...

Stephen R. Gregory <[log in to unmask]>

Wed, 1 Sep 1999 15:20:47 EDT

31 lines

Re: Another question of the day...

Kenny Bloomquist <[log in to unmask]>

Wed, 1 Sep 1999 12:44:08 -0700

42 lines

Re: Another question of the day...

Caldon Driscoll <[log in to unmask]>

Wed, 1 Sep 1999 15:47:28 -0400

54 lines

Re: Another question of the day...

Edwards, Ted A (AZ75) <[log in to unmask]>

Wed, 1 Sep 1999 12:46:11 -0700

64 lines

Re: Another question of the day...

Phil Zarrow <[log in to unmask]>

Wed, 1 Sep 1999 18:10:16 EDT

28 lines

Re: Another question of the day...

[log in to unmask]

Wed, 1 Sep 1999 17:25:38 -0500

45 lines

Re: Another question of the day...

Michael Fenner <[log in to unmask]>

Thu, 2 Sep 1999 00:09:05 +0100

75 lines

New Thread

Another SEARCHIN' question of the day...

Another SEARCHIN' question of the day...

Norman Robinson <[log in to unmask]>

Thu, 2 Sep 1999 09:51:32 +0000

87 lines

Re: Another SEARCHIN' question of the day...

Paul Tomlinson <[log in to unmask]>

Thu, 2 Sep 1999 11:01:24 -0400

42 lines

New Thread

ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PR...

Re: ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PR...

Rudy Sedlak <[log in to unmask]>

Fri, 24 Sep 1999 18:01:21 EDT

40 lines

New Thread

ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PROCESSING

ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PROCESSING

Joseph T Slanina <[log in to unmask]>

Thu, 23 Sep 1999 15:30:58 -0500

59 lines

Re: ANTITARNISH MATERIALS USED FOR FLEXIBLE AND RIGID PWB PROCESSING

Mauricio Castro <[log in to unmask]>

Fri, 24 Sep 1999 07:30:12 PDT

102 lines

New Thread

Any Opinion?

Any Opinion?

김달영 차장 전자 증평공장품질보증팀 <[log in to unmask]>

Thu, 30 Sep 1999 10:07:53 +0900

61 lines

Re: Any Opinion?

John <[log in to unmask]>

Wed, 29 Sep 1999 21:39:22 -0400

93 lines

Re: Any Opinion?

pod <[log in to unmask]>

Wed, 29 Sep 1999 22:28:04 -0700

91 lines

Re: Any Opinion?

Brian Lane <[log in to unmask]>

Thu, 30 Sep 1999 09:47:30 -0400

125 lines

New Thread

Assembly Estimate Package

Assembly Estimate Package

Greg Jones <[log in to unmask]>

Fri, 3 Sep 1999 05:49:34 -0700

33 lines

Re: Assembly Estimate Package

Phil Zarrow <[log in to unmask]>

Sat, 4 Sep 1999 09:21:29 EDT

38 lines

Re: Assembly Estimate Package

McMonagle, Michael R. <[log in to unmask]>

Sat, 4 Sep 1999 08:32:48 -0500

73 lines

Re: Assembly Estimate Package

Phil Zarrow <[log in to unmask]>

Sun, 5 Sep 1999 11:35:17 EDT

30 lines

New Thread

ATT Microelectronics or Lucent

ATT Microelectronics or Lucent

Thomas J. Gulley <[log in to unmask]>

Tue, 14 Sep 1999 17:36:09 -0500

30 lines

Re: ATT Microelectronics or Lucent

Richard Desrosiers <[log in to unmask]>

Tue, 14 Sep 1999 16:14:47 -0700

70 lines

Re: ATT Microelectronics or Lucent

Cyker, Howard A (Howie) <[log in to unmask]>

Wed, 15 Sep 1999 08:16:57 -0400

57 lines

New Thread

Attachments/Virus

Attachments/Virus

Creswick <[log in to unmask]>

Thu, 30 Sep 1999 20:48:53 -0500

40 lines

New Thread

B-stage,C-stage?

B-stage,C-stage?

Nicholas LAI <[log in to unmask]>

Tue, 14 Sep 1999 08:48:36 +0800

29 lines

Re: B-stage,C-stage?

Dr. Jerome S Sallo <[log in to unmask]>

Tue, 14 Sep 1999 10:29:48 EDT

31 lines

New Thread

Baking SOIC packages to dry them prior to reflow solder

Baking SOIC packages to dry them prior to reflow solder

Alan Shaw <[log in to unmask]>

Tue, 14 Sep 1999 16:34:13 -0400

36 lines

Re: Baking SOIC packages to dry them prior to reflow solder

KELLY M SCHRIVER <[log in to unmask]>

Tue, 14 Sep 1999 17:07:00 -0400

33 lines

Re: Baking SOIC packages to dry them prior to reflow solder

Bev Christian <[log in to unmask]>

Tue, 14 Sep 1999 16:13:03 -0500

81 lines

Re: Baking SOIC packages to dry them prior to reflow solder

Stephen R. Gregory <[log in to unmask]>

Tue, 14 Sep 1999 18:02:30 EDT

61 lines

Re: Baking SOIC packages to dry them prior to reflow solder

joyce <[log in to unmask]>

Tue, 14 Sep 1999 18:55:31 -0400

99 lines

Re: Baking SOIC packages to dry them prior to reflow solder

Paul Klasek <[log in to unmask]>

Wed, 15 Sep 1999 11:13:33 +1000

141 lines

Re: Baking SOIC packages to dry them prior to reflow solder

Jin Ho Lee <[log in to unmask]>

Wed, 15 Sep 1999 18:29:30 +0900

216 lines

Re: Baking SOIC packages to dry them prior to reflow solder

[log in to unmask]

Wed, 15 Sep 1999 07:05:19 -0400

83 lines

Re: Baking SOIC packages to dry them prior to reflow solder

John Brewer <[log in to unmask]>

Wed, 15 Sep 1999 08:45:41 -0400

51 lines

Baking SOIC packages to dry them prior to reflow solder

Norman Robinson <[log in to unmask]>

Thu, 16 Sep 1999 13:38:28 +0000

100 lines

New Thread

Bartlett Manufacturing

Bartlett Manufacturing

Tom Colton <[log in to unmask]>

Wed, 8 Sep 1999 15:26:38 -0400

40 lines

Re: Bartlett Manufacturing

Richard Desrosiers <[log in to unmask]>

Wed, 8 Sep 1999 13:49:27 -0700

85 lines

Re: Bartlett Manufacturing

Tom Colton <[log in to unmask]>

Wed, 8 Sep 1999 17:27:18 -0400

116 lines

New Thread

Benchmark Pricing

Benchmark Pricing

Yanuszewski, Ron <[log in to unmask]>

Wed, 22 Sep 1999 08:02:35 -0400

30 lines

New Thread

BGA Guidelines

BGA Guidelines

Phillips, Peter (NM75) <[log in to unmask]>

Thu, 9 Sep 1999 14:15:43 -0600

26 lines

Re: BGA Guidelines

Thorup, John <[log in to unmask]>

Thu, 9 Sep 1999 13:28:26 -0700

53 lines

Re: BGA Guidelines

Edwards, Ted A (AZ75) <[log in to unmask]>

Thu, 9 Sep 1999 14:06:31 -0700

79 lines

Re: BGA Guidelines

Thorup, John <[log in to unmask]>

Fri, 10 Sep 1999 06:52:09 -0700

92 lines

Re: BGA Guidelines

Bill Davis <[log in to unmask]>

Fri, 10 Sep 1999 11:43:29 -0700

110 lines

New Thread

BGA micro-blind vias

BGA micro-blind vias

edward Edward Szpruch <[log in to unmask]>

Tue, 14 Sep 1999 14:01:46 +0200

34 lines

Re: BGA micro-blind vias

pod <[log in to unmask]>

Tue, 14 Sep 1999 13:18:10 -0700

66 lines

Re: BGA micro-blind vias

Carey Pico <[log in to unmask]>

Wed, 15 Sep 1999 11:09:45 -0700

76 lines

Re: BGA micro-blind vias

edward Edward Szpruch <[log in to unmask]>

Thu, 16 Sep 1999 07:52:57 +0200

146 lines

Re: BGA micro-blind vias

Carey Pico <[log in to unmask]>

Thu, 16 Sep 1999 22:11:22 -0700

213 lines

New Thread

BGA site preparation after parts removal.

BGA site preparation after parts removal.

Mario Dion <[log in to unmask]>

Wed, 1 Sep 1999 16:18:38 -0400

107 lines

Re: BGA site preparation after parts removal.

. <[log in to unmask]>

Wed, 1 Sep 1999 23:04:07 +0200

149 lines

Re: BGA site preparation after parts removal.

Stephen R. Gregory <[log in to unmask]>

Wed, 1 Sep 1999 17:14:02 EDT

64 lines

Re: BGA site preparation after parts removal.

Rick Thompson <[log in to unmask]>

Wed, 1 Sep 1999 15:07:18 -0700

183 lines

New Thread

BGA voids

BGA voids

Joy, Stephen C <[log in to unmask]>

Sat, 25 Sep 1999 15:44:25 -0700

30 lines

Re: BGA voids

Ryan Grant <[log in to unmask]>

Mon, 27 Sep 1999 06:44:17 -0600

100 lines

Re: BGA voids

Parvez M.S. Patel <[log in to unmask]>

Mon, 27 Sep 1999 08:58:08 -0400

43 lines

Re: BGA voids

Ryan Grant <[log in to unmask]>

Mon, 27 Sep 1999 07:21:30 -0600

89 lines

New Thread

Biomaterials for electronics

Biomaterials for electronics

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 14 Sep 1999 11:51:12 +0200

30 lines

New Thread

Bleed-out

Bleed-out

Christian Skeppstedt (EMW) <[log in to unmask]>

Fri, 24 Sep 1999 13:12:24 +0200

35 lines

Re: Bleed-out

Eric Christison <[log in to unmask]>

Fri, 24 Sep 1999 06:48:38 -0500

36 lines

Re: Bleed-out

Michael Fenner <[log in to unmask]>

Sun, 26 Sep 1999 19:26:17 +0100

70 lines

New Thread

Board house repairing broken tr

Re: Board house repairing broken tr

Hooper Doug <[log in to unmask]>

Wed, 8 Sep 1999 10:31:00 -0400

87 lines

New Thread

Board house repairing broken trace

Board house repairing broken trace

West, Jim <[log in to unmask]>

Wed, 8 Sep 1999 10:01:28 -0400

43 lines

Re: Board house repairing broken trace

Keel, Mike <[log in to unmask]>

Wed, 8 Sep 1999 11:03:12 -0700

75 lines

Re: Board house repairing broken trace

West, Jim <[log in to unmask]>

Wed, 8 Sep 1999 14:23:28 -0400

86 lines

New Thread

Bonding rigid boards

Bonding rigid boards

Paul Maciejewski <[log in to unmask]>

Thu, 9 Sep 1999 08:54:21 -0400

38 lines

Re: Bonding rigid boards

KELLY M SCHRIVER <[log in to unmask]>

Thu, 9 Sep 1999 09:37:00 -0400

47 lines

Re: Bonding rigid boards

Paul Maciejewski <[log in to unmask]>

Thu, 9 Sep 1999 10:01:51 -0400

29 lines

New Thread

Bottom Side reflow.

Bottom Side reflow.

Steffen, Don E <[log in to unmask]>

Fri, 17 Sep 1999 10:34:52 -0500

41 lines

Re: Bottom Side reflow.

Hurst, Joe <[log in to unmask]>

Fri, 17 Sep 1999 11:51:10 -0400

74 lines

Re: Bottom Side reflow.

Phil Zarrow <[log in to unmask]>

Fri, 17 Sep 1999 12:07:15 EDT

46 lines

Re: Bottom Side reflow.

pod <[log in to unmask]>

Fri, 17 Sep 1999 12:14:45 -0500

71 lines

Re: Bottom Side reflow.

Yuen, Mike <[log in to unmask]>

Mon, 20 Sep 1999 10:19:35 -0500

76 lines

New Thread

Brushing after wave

Brushing after wave

Ivan Barrios <[log in to unmask]>

Thu, 16 Sep 1999 07:28:21 -0600

34 lines

Re: Brushing after wave

KELLY M SCHRIVER <[log in to unmask]>

Thu, 16 Sep 1999 10:00:00 -0400

36 lines

Re: Brushing after wave

Jason Smith <[log in to unmask]>

Thu, 16 Sep 1999 10:14:19 -0400

33 lines

Re: Brushing after wave

Jon Moore <[log in to unmask]>

Fri, 17 Sep 1999 11:23:47 EDT

37 lines

New Thread

BT Laminate

BT Laminate

[log in to unmask]

Thu, 9 Sep 1999 19:37:25 EDT

25 lines

Re: BT Laminate

Dave Hoover <[log in to unmask]>

Thu, 9 Sep 1999 16:48:57 -0700

50 lines

Re: BT Laminate

Don Vischulis <[log in to unmask]>

Thu, 9 Sep 1999 21:19:34 -0500

32 lines

Re: BT Laminate

David Jandzinski <[log in to unmask]>

Fri, 10 Sep 1999 08:54:08 -0700

55 lines

New Thread

Call for Papers

Call for Papers

Richard Haynes <[log in to unmask]>

Wed, 15 Sep 1999 15:50:15 -0400

84 lines

New Thread

Carbon ink info.

Carbon ink info.

Nicholas LAI <[log in to unmask]>

Tue, 14 Sep 1999 16:45:50 +0800

33 lines

New Thread

Chip-on-board Subcontractors

Chip-on-board Subcontractors

Stephen R. Gregory <[log in to unmask]>

Tue, 7 Sep 1999 15:44:03 EDT

54 lines

Re: Chip-on-board Subcontractors

Kelly M. Schriver <[log in to unmask]>

Tue, 7 Sep 1999 18:52:17 -0500

101 lines

New Thread

Cleaning of Boards at Board Manufacturer

Cleaning of Boards at Board Manufacturer

Tom Oliver <[log in to unmask]>

Wed, 22 Sep 1999 07:11:52 -0400

39 lines

Re: Cleaning of Boards at Board Manufacturer

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Wed, 22 Sep 1999 14:14:02 +0100

72 lines

New Thread

Cleaning of misprint glue

Cleaning of misprint glue

Poh Kong Hui <[log in to unmask]>

Tue, 28 Sep 1999 06:44:44 +0800

34 lines

Re: Cleaning of misprint glue

Jon Moore <[log in to unmask]>

Mon, 27 Sep 1999 19:05:10 EDT

39 lines

New Thread

Clogging dispenser (cont'd)

Clogging dispenser (cont'd)

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 3 Sep 1999 15:23:36 +0200

33 lines

Re: Clogging dispenser (cont'd)

Paul Klasek <[log in to unmask]>

Sat, 4 Sep 1999 10:09:22 +1000

109 lines

New Thread

Clogging dispensers soon...

Clogging dispensers soon...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 6 Sep 1999 12:56:38 +0200

38 lines

Re: Clogging dispensers soon...

Michael Fenner <[log in to unmask]>

Mon, 6 Sep 1999 21:52:34 +0100

124 lines

Re: Clogging dispensers soon...

Paul Klasek <[log in to unmask]>

Tue, 7 Sep 1999 12:34:17 +1000

173 lines

Re: Clogging dispensers soon...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 9 Sep 1999 14:42:08 +0200

82 lines

Re: Clogging dispensers soon...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 9 Sep 1999 15:13:56 +0200

113 lines

Re: Clogging dispensers soon...

Thorup, John <[log in to unmask]>

Thu, 9 Sep 1999 06:31:09 -0700

148 lines

Re: Clogging dispensers soon...

jason gregory <[log in to unmask]>

Thu, 9 Sep 1999 08:38:27 -0500

158 lines

Re: Clogging dispensers soon...

Paul Klasek <[log in to unmask]>

Fri, 10 Sep 1999 10:05:44 +1000

162 lines

Re: Clogging dispensers soon...

Michael Fenner <[log in to unmask]>

Fri, 10 Sep 1999 12:19:07 +0100

201 lines

Re: Clogging dispensers soon...

Michael Fenner <[log in to unmask]>

Sat, 11 Sep 1999 13:32:15 +0100

135 lines

Re: Clogging dispensers soon...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 14 Sep 1999 10:18:51 +0200

51 lines

Re: Clogging dispensers soon...

Paul Klasek <[log in to unmask]>

Wed, 15 Sep 1999 12:01:40 +1000

142 lines

Re: Clogging dispensers soon...

Michael Fenner <[log in to unmask]>

Fri, 17 Sep 1999 23:03:38 +0100

56 lines

New Thread

Clogging dispensers, free pictures with Ingemar

Re: Clogging dispensers, free pictures with Ingemar

Paul Klasek <[log in to unmask]>

Thu, 9 Sep 1999 11:34:55 +1000

279 lines

New Thread

Clogging dispensers, need an eye or two

Clogging dispensers, need an eye or two

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 8 Sep 1999 15:41:39 +0200

207 lines

Re: Clogging dispensers, need an eye or two

joyce <[log in to unmask]>

Wed, 8 Sep 1999 18:18:28 -0400

251 lines

Re: Clogging dispensers, need an eye or two

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 14 Sep 1999 11:12:19 +0200

42 lines

New Thread

COB technology

COB technology

John Harris <[log in to unmask]>

Wed, 8 Sep 1999 14:01:38 +1000

38 lines

COB technology

John Harris <[log in to unmask]>

Tue, 14 Sep 1999 14:38:51 +1000

34 lines

Re: COB technology

Glenn Pelkey <[log in to unmask]>

Mon, 20 Sep 1999 10:54:14 PDT

67 lines

New Thread

COB,FP,TAB

COB,FP,TAB

Nicholas LAI <[log in to unmask]>

Mon, 27 Sep 1999 15:05:33 +0800

31 lines

Re: COB,FP,TAB

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 27 Sep 1999 09:16:34 +0200

34 lines

Re: COB,FP,TAB

Nicholas LAI <[log in to unmask]>

Mon, 27 Sep 1999 15:21:07 +0800

33 lines

Re: COB,FP,TAB

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 27 Sep 1999 10:43:08 +0200

37 lines

Re: COB,FP,TAB

Dieselberg, Ron <[log in to unmask]>

Mon, 27 Sep 1999 08:23:56 -0400

60 lines

Re: COB,FP,TAB

Stephen R. Gregory <[log in to unmask]>

Mon, 27 Sep 1999 13:41:48 EDT

43 lines

New Thread

COB,FP,TAB/Wire bond/plasma clean

Re: COB,FP,TAB/Wire bond/plasma clean

Carey Pico <[log in to unmask]>

Mon, 27 Sep 1999 11:03:09 -0700

97 lines

Re: COB,FP,TAB/Wire bond/plasma clean

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 28 Sep 1999 09:11:20 +0200

55 lines

New Thread

Column Grid Array

Column Grid Array

Kuczynski Michael <[log in to unmask]>

Tue, 21 Sep 1999 12:17:18 -0400

43 lines

Re: Column Grid Array

pod <[log in to unmask]>

Tue, 21 Sep 1999 13:35:19 -0700

80 lines

Re: Column Grid Array

Kuczynski Michael <[log in to unmask]>

Tue, 21 Sep 1999 14:43:04 -0400

77 lines

Re: Column Grid Array

Werner Engelmaier <[log in to unmask]>

Tue, 21 Sep 1999 14:56:08 EDT

40 lines

New Thread

communication between design and manufacture

communication between design and manufacture

Nils de Caluwe <[log in to unmask]>

Tue, 14 Sep 1999 08:33:33 +0100

83 lines

Re: communication between design and manufacture

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Tue, 14 Sep 1999 13:30:27 -0400

136 lines

Re: communication between design and manufacture

Phil Crepeau <[log in to unmask]>

Tue, 14 Sep 1999 11:19:48 -0700

31 lines

Re: communication between design and manufacture

Nils de Caluwe <[log in to unmask]>

Wed, 15 Sep 1999 15:52:05 +0100

98 lines

Re: communication between design and manufacture

Jorge Engenharia <[log in to unmask]>

Wed, 15 Sep 1999 12:37:35 -0400

126 lines

New Thread

Company ?

Company ?

Miguel A. Pulido <[log in to unmask]>

Tue, 7 Sep 1999 12:52:00 -0500

34 lines

Re: Company ?

Vascukynas, Brian <[log in to unmask]>

Tue, 7 Sep 1999 12:49:44 -0400

68 lines

Re: Company ?

Houston, Terri <[log in to unmask]>

Tue, 7 Sep 1999 11:57:02 -0500

58 lines

Re: Company ?

Bruce Tostevin <[log in to unmask]>

Tue, 7 Sep 1999 13:23:36 -0400

68 lines

Re: Company ?

Andrew Kowalewski <[log in to unmask]>

Tue, 7 Sep 1999 12:01:40 -0500

72 lines

New Thread

component solderability

component solderability

DESSART <[log in to unmask]>

Mon, 27 Sep 1999 14:11:54 +0200

48 lines

Re: component solderability

[log in to unmask]

Mon, 27 Sep 1999 09:40:13 EDT

38 lines

Re: component solderability

David Hillman <[log in to unmask]>

Mon, 27 Sep 1999 09:03:55 -0500

88 lines

Re: component solderability

Brian Lane <[log in to unmask]>

Mon, 27 Sep 1999 10:04:56 -0400

71 lines

Re: component solderability

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 28 Sep 1999 08:25:17 +0200

55 lines

New Thread

Conformal coating machines etc ?

Conformal coating machines etc ?

Matthew Lamkin <[log in to unmask]>

Thu, 2 Sep 1999 10:41:35 +0100

72 lines

Re: Conformal coating machines etc ?

Jorge Engenharia <[log in to unmask]>

Thu, 2 Sep 1999 08:06:01 -0300

109 lines

Re: Conformal coating machines etc ?

McMonagle, Michael R. <[log in to unmask]>

Thu, 2 Sep 1999 08:34:25 -0500

106 lines

Re: Conformal coating machines etc ?

Jon Moore <[log in to unmask]>

Thu, 2 Sep 1999 15:14:11 EDT

40 lines

Re: Conformal coating machines etc ?

Graham Naisbitt <[log in to unmask]>

Fri, 3 Sep 1999 16:13:31 +0100

111 lines

Re: Conformal coating machines etc ?

Cory & Lise <[log in to unmask]>

Sat, 4 Sep 1999 13:49:49 -0400

112 lines

Re: Conformal coating machines etc ?

Kenny Bloomquist <[log in to unmask]>

Tue, 7 Sep 1999 07:05:13 -0700

49 lines

New Thread

Conformal coating machines etc ? (addition)

Re: Conformal coating machines etc ? (addition)

Matthew Lamkin <[log in to unmask]>

Mon, 6 Sep 1999 09:10:56 +0100

54 lines

Re: Conformal coating machines etc ? (addition)

Aric Parr <[log in to unmask]>

Tue, 7 Sep 1999 10:19:12 EDT

90 lines

Re: Conformal coating machines etc ? (addition)

Jon Moore <[log in to unmask]>

Tue, 7 Sep 1999 15:25:26 EDT

38 lines

New Thread

Contamination limits on plated SMT devices

Contamination limits on plated SMT devices

Michael Simms <[log in to unmask]>

Fri, 3 Sep 1999 12:34:02 -0500

86 lines

New Thread

Coplanarity spec for BGA & QFP?

Coplanarity spec for BGA & QFP?

Ken Patel <[log in to unmask]>

Tue, 7 Sep 1999 11:30:20 -0700

32 lines

Re: Coplanarity spec for BGA & QFP?

Glenn Pelkey <[log in to unmask]>

Tue, 7 Sep 1999 15:58:47 PDT

44 lines

Re: Coplanarity spec for BGA & QFP?

Bill Davis <[log in to unmask]>

Wed, 8 Sep 1999 10:53:22 -0700

63 lines

New Thread

Copper Clad Laminate Slippage

Re: Copper Clad Laminate Slippage

Chuck Brummer <[log in to unmask]>

Wed, 1 Sep 1999 07:52:57 -0700

64 lines

Copper Clad Laminate Slippage

Wang, William (Suzhou Laminate) <[log in to unmask]>

Wed, 1 Sep 1999 17:47:00 -0700

104 lines

Re: Copper Clad Laminate Slippage

Glenn Pelkey <[log in to unmask]>

Thu, 2 Sep 1999 08:11:08 PDT

94 lines

Re: Copper Clad Laminate Slippage

Chuck Brummer <[log in to unmask]>

Thu, 2 Sep 1999 08:57:29 -0700

139 lines

Re: Copper Clad Laminate Slippage

Colin <[log in to unmask]>

Thu, 2 Sep 1999 11:58:33 -0500

171 lines

New Thread

copper foil

copper foil

[log in to unmask]

Fri, 24 Sep 1999 06:27:14 -0700

28 lines

New Thread

coverlay: slots/vs holes

coverlay: slots/vs holes

Joseph H. Smith <[log in to unmask]>

Fri, 10 Sep 1999 08:28:34 -0800

26 lines

New Thread

Cracking PCB's

Cracking PCB's

Gene Holmes <[log in to unmask]>

Thu, 2 Sep 1999 23:35:12 +0100

72 lines

Re: Cracking PCB's

Zajko, Robert A (PA62) <[log in to unmask]>

Thu, 2 Sep 1999 15:58:11 -0700

109 lines

New Thread

CTE for FR4; was Woh Nelco

CTE for FR4; was Woh Nelco

Joy, Stephen C <[log in to unmask]>

Thu, 9 Sep 1999 08:12:41 -0700

51 lines

Re: CTE for FR4; was Woh Nelco

Werner Engelmaier <[log in to unmask]>

Thu, 9 Sep 1999 14:58:41 EDT

60 lines

New Thread

Cupric vs. Ammonium Etchants

Re: Cupric vs. Ammonium Etchants

Phil Culpovich <[log in to unmask]>

Wed, 15 Sep 1999 08:23:26 -0000

112 lines

New Thread

CVS

CVS

Pat Brooks <[log in to unmask]>

Thu, 23 Sep 1999 11:35:07 -0500

25 lines

Re: CVS

Eric Yakobson <[log in to unmask]>

Thu, 23 Sep 1999 14:37:31 -0400

66 lines

New Thread

DC 160, electromigration

DC 160, electromigration

Wanner Bernhard <[log in to unmask]>

Thu, 16 Sep 1999 16:41:54 +0200

29 lines

Re: DC 160, electromigration

Glenn Pelkey <[log in to unmask]>

Fri, 17 Sep 1999 11:52:46 PDT

52 lines

Re: DC 160, electromigration

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 20 Sep 1999 09:17:53 +0200

85 lines

New Thread

Depaneling Machine ??

Re: Depaneling Machine ??

Arturo Medellin <[log in to unmask]>

Sun, 5 Sep 1999 10:41:14 -0600

78 lines

New Thread

detect method on nick or dish down circuit. (urgent)

Re: detect method on nick or dish down circuit. (urgent)

Michael D. Doty <[log in to unmask]>

Tue, 7 Sep 1999 23:06:50 -0400

73 lines

New Thread

detect method on nick or dish down circuit.(urgent)

detect method on nick or dish down circuit.(urgent)

Nicholas LAI <[log in to unmask]>

Wed, 8 Sep 1999 10:16:55 +0800

33 lines

New Thread

Different of Solderability Test

Different of Solderability Test

Nicholas LAI <[log in to unmask]>

Fri, 10 Sep 1999 10:55:23 +0800

37 lines

Re: Different of Solderability Test

David Hillman <[log in to unmask]>

Fri, 10 Sep 1999 08:40:31 -0500

63 lines

New Thread

Dispensers

Re: Dispensers

Paul Klasek <[log in to unmask]>

Mon, 13 Sep 1999 09:49:03 +1000

281 lines

New Thread

DOE & SPC Recommendations?

Re: DOE & SPC Recommendations?

Sunil Gupta <[log in to unmask]>

Wed, 1 Sep 1999 09:34:48 +0530

80 lines

Re: DOE & SPC Recommendations?

Smith Russell MSM LAPO US <[log in to unmask]>

Thu, 9 Sep 1999 01:52:00 +0200

117 lines

Re: DOE & SPC Recommendations?

Hollandsworth, Ron <[log in to unmask]>

Thu, 9 Sep 1999 09:04:44 -0500

147 lines

New Thread

Drilling benchmark report

Drilling benchmark report

Philip Firth <[log in to unmask]>

Tue, 7 Sep 1999 13:41:45 +0100

45 lines

New Thread

Dry Film Mask Issues...

Dry Film Mask Issues...

Stephen R. Gregory <[log in to unmask]>

Tue, 14 Sep 1999 20:20:21 EDT

59 lines

Re: Dry Film Mask Issues...

pod <[log in to unmask]>

Wed, 15 Sep 1999 03:54:13 -0700

99 lines

Re: Dry Film Mask Issues...

Richard Desrosiers <[log in to unmask]>

Wed, 15 Sep 1999 08:26:32 -0700

163 lines

Re: Dry Film Mask Issues...

KELLY M SCHRIVER <[log in to unmask]>

Thu, 16 Sep 1999 08:30:00 -0400

32 lines

New Thread

Dryfilm mask adhesion, the saga continues...

Dryfilm mask adhesion, the saga continues...

Stephen R. Gregory <[log in to unmask]>

Thu, 2 Sep 1999 14:16:44 EDT

69 lines

Re: Dryfilm mask adhesion, the saga continues...

pod <[log in to unmask]>

Thu, 2 Sep 1999 15:04:28 -0500

96 lines

Re: Dryfilm mask adhesion, the saga continues...

Stephen R. Gregory <[log in to unmask]>

Thu, 2 Sep 1999 16:04:40 EDT

44 lines

Re: Dryfilm mask adhesion, the saga continues...

joyce <[log in to unmask]>

Thu, 2 Sep 1999 18:23:07 -0400

117 lines

Re: Dryfilm mask adhesion, the saga continues...

Paul Klasek <[log in to unmask]>

Fri, 3 Sep 1999 08:57:33 +1000

171 lines

Re: Dryfilm mask adhesion, the saga continues...

Stephen R. Gregory <[log in to unmask]>

Thu, 2 Sep 1999 19:22:59 EDT

85 lines

Re: Dryfilm mask adhesion, the saga continues...

Graham Naisbitt <[log in to unmask]>

Fri, 3 Sep 1999 15:43:16 +0100

125 lines

Re: Dryfilm mask adhesion, the saga continues...

KELLY M SCHRIVER <[log in to unmask]>

Fri, 3 Sep 1999 09:18:00 -0400

48 lines

Re: Dryfilm mask adhesion, the saga continues...

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Fri, 3 Sep 1999 15:25:50 -0400

211 lines

Re: Dryfilm mask adhesion, the saga continues...

Stephen R. Gregory <[log in to unmask]>

Fri, 3 Sep 1999 12:44:17 EDT

54 lines

New Thread

Dryfilm mask adhesion, the saga continues... -Reply

Re: Dryfilm mask adhesion, the saga continues... -Reply

Charles Pitarys <[log in to unmask]>

Tue, 7 Sep 1999 09:00:37 -0500

184 lines

Re: Dryfilm mask adhesion, the saga continues... -Reply

Charles Pitarys <[log in to unmask]>

Thu, 9 Sep 1999 10:00:23 -0400

186 lines

New Thread

Dull finish around holes in Cu plating

Dull finish around holes in Cu plating

Francis Lai <[log in to unmask]>

Wed, 15 Sep 1999 22:35:00 -0700

37 lines

Re: Dull finish around holes in Cu plating

Mordechai Holtzman <[log in to unmask]>

Thu, 16 Sep 1999 01:17:02 EDT

45 lines

Re: Dull finish around holes in Cu plating

Anil Kher <[log in to unmask]>

Thu, 16 Sep 1999 12:39:28 +0530

65 lines

Re: Dull finish around holes in Cu plating

Eric Yakobson <[log in to unmask]>

Thu, 16 Sep 1999 18:40:09 -0400

70 lines

New Thread

E-testing New Method

E-testing New Method

Nicholas LAI <[log in to unmask]>

Fri, 3 Sep 1999 16:38:38 +0800

36 lines

New Thread

Electrical Breakdown, O2 vs. N2?

Electrical Breakdown, O2 vs. N2?

Phil Hersey <[log in to unmask]>

Mon, 20 Sep 1999 10:09:50 -0700

35 lines

Re: Electrical Breakdown, O2 vs. N2?

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 21 Sep 1999 09:24:15 +0200

79 lines

New Thread

electrical component solderability

electrical component solderability

DESSART <[log in to unmask]>

Wed, 22 Sep 1999 11:20:53 +0200

45 lines

Re: electrical component solderability

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Wed, 22 Sep 1999 09:02:25 -0400

85 lines

Re: electrical component solderability

KELLY M SCHRIVER <[log in to unmask]>

Wed, 22 Sep 1999 09:38:00 -0400

36 lines

New Thread

Electrical measurement labs

Electrical measurement labs

LI YUAN <[log in to unmask]>

Fri, 3 Sep 1999 16:27:13 -0600

34 lines

New Thread

Electro-mechanical connections for Power Applications

Re: Electro-mechanical connections for Power Applications

Seth Goodman <[log in to unmask]>

Thu, 2 Sep 1999 15:30:01 -0500

98 lines

New Thread

Epoxy (clear or black) wicking on leads? How to control and and possible root causes.

Epoxy (clear or black) wicking on leads? How to control and and possible root causes.

Enrique Lodangco <[log in to unmask]>

Sun, 5 Sep 1999 01:49:53 +0800

145 lines

Re: Epoxy (clear or black) wicking on leads? How to control and and possible root causes.

Eric Lodangco <[log in to unmask]>

Sun, 5 Sep 1999 03:00:47 PHT

104 lines

Re: Epoxy (clear or black) wicking on leads? How to control and and possible root causes.

Michael Fenner <[log in to unmask]>

Sun, 5 Sep 1999 20:37:56 +0100

157 lines

New Thread

Epoxy (clear or black) wicking on leads? How to controland possible root causes.

Re: Epoxy (clear or black) wicking on leads? How to controland possible root causes.

Enrique Lodangco <[log in to unmask]>

Tue, 7 Sep 1999 20:35:16 +0800

227 lines

New Thread

ESD and SMT Tape/Reels - Concern

ESD and SMT Tape/Reels - Concern

Clive ffitch <[log in to unmask]>

Thu, 2 Sep 1999 16:21:27 +0100

106 lines

Re: ESD and SMT Tape/Reels - Concern

Hamilton, Richard CLE 4454 <[log in to unmask]>

Thu, 2 Sep 1999 10:51:56 -0700

74 lines

Re: ESD and SMT Tape/Reels - Concern

Ramsey's <[log in to unmask]>

Thu, 2 Sep 1999 17:27:17 -0400

78 lines

Re: ESD and SMT Tape/Reels - Concern

Matthew Lamkin <[log in to unmask]>

Fri, 3 Sep 1999 09:49:12 +0100

65 lines

Re: ESD and SMT Tape/Reels - Concern

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 3 Sep 1999 10:36:24 +0200

70 lines

Re: ESD and SMT Tape/Reels - Concern

Michael Fenner <[log in to unmask]>

Sun, 5 Sep 1999 20:54:08 +0100

102 lines

Re: ESD and SMT Tape/Reels - Concern

Blomberg, Rainer (FL51) <[log in to unmask]>

Tue, 7 Sep 1999 12:13:40 -0400

102 lines

Re: ESD and SMT Tape/Reels - Concern

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 8 Sep 1999 08:25:29 +0200

130 lines

Re: ESD and SMT Tape/Reels - Concern

Clive ffitch <[log in to unmask]>

Fri, 10 Sep 1999 11:20:31 +0100

104 lines

Re: ESD and SMT Tape/Reels - Concern

Paul Klasek <[log in to unmask]>

Mon, 13 Sep 1999 08:41:36 +1000

77 lines

New Thread

Exposed basis material

Exposed basis material

Miguel Vallejo <[log in to unmask]>

Tue, 28 Sep 1999 19:07:21 -0700

35 lines

Re: Exposed basis material

Joan M.Slade <[log in to unmask]>

Wed, 29 Sep 1999 09:32:05 -0400

30 lines

New Thread

Facility/organization that repairs a Malcom Viscometer (PCU-203)

Facility/organization that repairs a Malcom Viscometer (PCU-203)

Enrique Lodangco <[log in to unmask]>

Wed, 8 Sep 1999 20:21:51 +0800

68 lines

New Thread

Fiducials

Fiducials

Taheri, Kamran <[log in to unmask]>

Wed, 22 Sep 1999 15:28:55 -0500

30 lines

Re: Fiducials

pod <[log in to unmask]>

Wed, 22 Sep 1999 15:57:28 -0700

60 lines

Re: Fiducials

Tempea, Ioan <[log in to unmask]>

Wed, 22 Sep 1999 17:22:59 -0400

53 lines

Re: Fiducials

Tempea, Ioan <[log in to unmask]>

Wed, 22 Sep 1999 17:27:50 -0400

64 lines

Re: Fiducials

Paul Klasek <[log in to unmask]>

Thu, 23 Sep 1999 09:09:10 +1000

95 lines

Re: Fiducials

Doug Black <[log in to unmask]>

Thu, 23 Sep 1999 09:06:00 +0100

62 lines

Re: Fiducials

Matthew Lamkin <[log in to unmask]>

Thu, 23 Sep 1999 09:31:58 +0100

89 lines

Re: Fiducials

Ahne Oosterhof <[log in to unmask]>

Thu, 23 Sep 1999 14:16:31 -0700

154 lines

Re: Fiducials

Matthew Lamkin <[log in to unmask]>

Fri, 24 Sep 1999 08:17:46 +0100

90 lines

Re: Fiducials

Jorge Engenharia <[log in to unmask]>

Fri, 24 Sep 1999 10:54:11 -0300

107 lines

Re: Fiducials

Taheri, Kamran <[log in to unmask]>

Fri, 24 Sep 1999 13:08:29 -0500

161 lines

New Thread

Filtering incoming mail

Filtering incoming mail

JACOB MOZEL <[log in to unmask]>

Thu, 9 Sep 1999 17:16:53 +0200

77 lines

Re: Filtering incoming mail

Nils de Caluwe <[log in to unmask]>

Thu, 9 Sep 1999 15:47:27 +0100

116 lines

Re: Filtering incoming mail

West, Jim <[log in to unmask]>

Thu, 9 Sep 1999 10:47:58 -0400

56 lines

Re: Filtering incoming mail

Stephen R. Gregory <[log in to unmask]>

Thu, 9 Sep 1999 10:59:58 EDT

55 lines

Re: Filtering incoming mail

jason gregory <[log in to unmask]>

Thu, 9 Sep 1999 10:05:35 -0500

46 lines

Re: Filtering incoming mail

Alex Krstic <[log in to unmask]>

Thu, 9 Sep 1999 09:29:51 -0600

49 lines

Re: Filtering incoming mail

Kenny Bloomquist <[log in to unmask]>

Thu, 9 Sep 1999 08:57:03 -0700

46 lines

Re: Filtering incoming mail

jason gregory <[log in to unmask]>

Thu, 9 Sep 1999 11:03:54 -0500

47 lines

Re: Filtering incoming mail

Tony Boyce <[log in to unmask]>

Thu, 9 Sep 1999 08:59:08 -0700

45 lines

Re: Filtering incoming mail

Matthew Lamkin <[log in to unmask]>

Fri, 10 Sep 1999 11:40:01 +0100

75 lines

New Thread

Filtering mail

Filtering mail

JACOB MOZEL <[log in to unmask]>

Thu, 9 Sep 1999 19:11:03 +0200

62 lines

New Thread

flex circuit advice

flex circuit advice

Joseph H. Smith <[log in to unmask]>

Wed, 29 Sep 1999 14:45:11 -0800

38 lines

flex circuit advice

William Anderson <[log in to unmask]>

Thu, 30 Sep 1999 08:28:32 -0500

89 lines

Flex Circuit Advice

Andy Magee <[log in to unmask]>

Thu, 30 Sep 1999 15:47:13 -0400

38 lines

New Thread

Flex circuit terms

Flex circuit terms

Joseph H. Smith <[log in to unmask]>

Thu, 9 Sep 1999 16:03:01 -0800

28 lines

Re: Flex circuit terms

Fujikura Ltd. <[log in to unmask]>

Fri, 10 Sep 1999 10:54:35 +0900

69 lines

Re: Flex circuit terms

Phil Dutton <[log in to unmask]>

Fri, 10 Sep 1999 12:17:33 +0900

117 lines

Re: Flex circuit terms

Fujikura Ltd. <[log in to unmask]>

Fri, 10 Sep 1999 19:00:53 +0900

89 lines

New Thread

Flux activity

Flux activity

John Harris <[log in to unmask]>

Thu, 2 Sep 1999 13:47:50 +1000

36 lines

Re: Flux activity

Kinol, Vince <[log in to unmask]>

Thu, 2 Sep 1999 10:50:49 -0400

53 lines

New Thread

Flux Dye

Flux Dye

Derek Humble <[log in to unmask]>

Fri, 24 Sep 1999 15:42:37 -0400

32 lines

Re: Flux Dye

Rudy Sedlak <[log in to unmask]>

Fri, 24 Sep 1999 16:52:26 EDT

36 lines

Re: Flux Dye

Michael Fenner <[log in to unmask]>

Sun, 26 Sep 1999 19:12:12 +0100

63 lines

New Thread

Flux Removal with MEK

Flux Removal with MEK

David Hipp <[log in to unmask]>

Thu, 2 Sep 1999 10:24:55 -0500

40 lines

Re: Flux Removal with MEK

Joy, Stephen C <[log in to unmask]>

Thu, 2 Sep 1999 08:35:06 -0700

65 lines

Re: Flux Removal with MEK

Stephen R. Gregory <[log in to unmask]>

Thu, 2 Sep 1999 11:58:02 EDT

106 lines

Re: Flux Removal with MEK

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Thu, 2 Sep 1999 17:09:26 +0100

47 lines

Re: Flux Removal with MEK

Michael Fenner <[log in to unmask]>

Fri, 3 Sep 1999 00:42:07 +0100

90 lines

Re: Flux Removal with MEK

Kathie Lucas <[log in to unmask]>

Tue, 7 Sep 1999 07:03:57 -0600

95 lines

Re: Flux Removal with MEK

Tom Colton <[log in to unmask]>

Tue, 7 Sep 1999 09:32:48 -0400

115 lines

Re: Flux Removal with MEK

Bev Christian <[log in to unmask]>

Tue, 7 Sep 1999 11:17:48 -0400

166 lines

Re: Flux Removal with MEK

Eric Kalgren <[log in to unmask]>

Tue, 7 Sep 1999 10:55:31 -0600

208 lines

Re: Flux Removal with MEK

Kathie Lucas <[log in to unmask]>

Tue, 7 Sep 1999 14:22:30 -0600

170 lines

Re: Flux Removal with MEK

Jon Moore <[log in to unmask]>

Tue, 7 Sep 1999 18:23:18 EDT

33 lines

Re: Flux Removal with MEK

Graham Naisbitt <[log in to unmask]>

Wed, 8 Sep 1999 16:36:21 +0100

231 lines

Re: Flux Removal with MEK

Lambert, Katherine A. <[log in to unmask]>

Thu, 9 Sep 1999 07:47:05 -0400

230 lines

Re: Flux Removal with MEK

Jon Moore <[log in to unmask]>

Fri, 10 Sep 1999 12:12:35 EDT

39 lines

New Thread

Fluxless soldering (AuSn) with SMT reflow ovens

Fluxless soldering (AuSn) with SMT reflow ovens

JEFF PERKINS <[log in to unmask]>

Fri, 17 Sep 1999 12:35:37 -0400

90 lines

Re: Fluxless soldering (AuSn) with SMT reflow ovens

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 20 Sep 1999 08:37:29 +0200

49 lines

Re: Fluxless soldering (AuSn) with SMT reflow ovens

Michael Fenner <[log in to unmask]>

Mon, 20 Sep 1999 09:20:02 +0100

96 lines

New Thread

Fudicial Shape

Fudicial Shape

Steffen, Don E <[log in to unmask]>

Fri, 24 Sep 1999 14:08:34 -0500

39 lines

Re: Fudicial Shape

Chris Bartkowiak <[log in to unmask]>

Fri, 24 Sep 1999 15:29:29 -0400

66 lines

Re: Fudicial Shape

Tempea, Ioan <[log in to unmask]>

Fri, 24 Sep 1999 16:00:32 -0400

86 lines

Re: Fudicial Shape

Jorge Engenharia <[log in to unmask]>

Fri, 24 Sep 1999 17:06:32 -0300

126 lines

Re: Fudicial Shape

Jeff Seeger <[log in to unmask]>

Fri, 24 Sep 1999 16:17:49 -0400

39 lines

Re: Fudicial Shape

Kelly M. Schriver <[log in to unmask]>

Fri, 24 Sep 1999 17:54:52 -0500

74 lines

Re: Fudicial Shape

Tom Hybiske <[log in to unmask]>

Mon, 27 Sep 1999 07:54:26 -0400

56 lines

New Thread

Fw: Cleaning of Boards at Board Manufacturer

Fw: Cleaning of Boards at Board Manufacturer

Tom Oliver <[log in to unmask]>

Wed, 22 Sep 1999 08:33:47 -0400

42 lines

Re: Fw: Cleaning of Boards at Board Manufacturer

Rudy Sedlak <[log in to unmask]>

Wed, 22 Sep 1999 10:24:41 EDT

36 lines

Re: Fw: Cleaning of Boards at Board Manufacturer

Tom Oliver <[log in to unmask]>

Wed, 22 Sep 1999 11:26:43 -0400

51 lines

New Thread

FW: OLD PEOPLE

FW: OLD PEOPLE

John Mastorides <[log in to unmask]>

Wed, 1 Sep 1999 12:46:18 -0400

26 lines

New Thread

FW: Old People!! :)

FW: Old People!! :)

John Mastorides <[log in to unmask]>

Wed, 1 Sep 1999 12:13:43 -0400

105 lines

New Thread

Fw: Returned mail: User unknown

Fw: Returned mail: User unknown

Chris Robertson <[log in to unmask]>

Tue, 14 Sep 1999 15:48:13 -0500

87 lines

Re: Fw: Returned mail: User unknown

Brian Stumm <[log in to unmask]>

Thu, 16 Sep 1999 08:09:51 -0700

84 lines

New Thread

FW: Subj: Poor Wetting/Solderability/Contamination/????

FW: Subj: Poor Wetting/Solderability/Contamination/????

Hollandsworth, Ron <[log in to unmask]>

Fri, 17 Sep 1999 08:14:23 -0500

79 lines

New Thread

FW: Susceptibility of surface finishes to skin oils

FW: Susceptibility of surface finishes to skin oils

Bruce Tostevin <[log in to unmask]>

Tue, 7 Sep 1999 16:05:44 -0400

37 lines

Re: FW: Susceptibility of surface finishes to skin oils

Paul Klasek <[log in to unmask]>

Wed, 8 Sep 1999 09:02:16 +1000

74 lines

Re: FW: Susceptibility of surface finishes to skin oils

Aric Parr <[log in to unmask]>

Wed, 8 Sep 1999 07:12:12 EDT

109 lines

Re: FW: Susceptibility of surface finishes to skin oils

pod <[log in to unmask]>

Tue, 28 Sep 1999 21:46:24 -0700

695 lines

Re: FW: Susceptibility of surface finishes to skin oils

Paul Klasek <[log in to unmask]>

Wed, 29 Sep 1999 16:46:37 +1000

141 lines

New Thread

FW: [TN] Bottom Side reflow.

FW: [TN] Bottom Side reflow.

Jorge Engenharia <[log in to unmask]>

Fri, 17 Sep 1999 13:42:20 -0300

118 lines

New Thread

FW: [TN] Woh Nelco.............

FW: [TN] Woh Nelco.............

Geoff Layhe <[log in to unmask]>

Wed, 8 Sep 1999 15:56:04 +0100

80 lines

Re: FW: [TN] Woh Nelco.............

Werner Engelmaier <[log in to unmask]>

Wed, 8 Sep 1999 22:51:46 EDT

39 lines

Re: FW: [TN] Woh Nelco.............

Roger Massey-G14195 <[log in to unmask]>

Thu, 9 Sep 1999 08:30:06 +0100

155 lines

New Thread

FW:MIL-STD-100 vs ASME Y14.100

FW:MIL-STD-100 vs ASME Y14.100

KELLY M SCHRIVER <[log in to unmask]>

Mon, 20 Sep 1999 10:06:00 -0400

67 lines

New Thread

GC-PLACE & GC-ICT

GC-PLACE & GC-ICT

Thomas J. Gulley <[log in to unmask]>

Thu, 9 Sep 1999 08:05:18 -0500

34 lines

New Thread

Gerber file viewer

Gerber file viewer

Lucas Liu <[log in to unmask]>

Wed, 8 Sep 1999 07:08:46 +0800

29 lines

Re: Gerber file viewer

Stephen R. Gregory <[log in to unmask]>

Tue, 7 Sep 1999 19:27:46 EDT

48 lines

Re: Gerber file viewer

Lynn Isaacson <[log in to unmask]>

Tue, 7 Sep 1999 16:28:42 -0700

53 lines

Re: Gerber file viewer

Rick Thompson <[log in to unmask]>

Tue, 7 Sep 1999 15:49:52 -0700

73 lines

Re: Gerber file viewer

Herman Cho <[log in to unmask]>

Tue, 7 Sep 1999 19:48:42 -0700

103 lines

Re: Gerber file viewer

Eric Christison <[log in to unmask]>

Wed, 8 Sep 1999 03:18:04 -0500

40 lines

Re: Gerber file viewer

Anne Ledger <[log in to unmask]>

Wed, 8 Sep 1999 07:36:21 -0400

61 lines

Re: Gerber file viewer

Matthew Lamkin <[log in to unmask]>

Wed, 8 Sep 1999 16:47:56 +0100

66 lines

Re: Gerber file viewer

Matthew Lamkin <[log in to unmask]>

Wed, 8 Sep 1999 16:42:11 +0100

75 lines

Re: Gerber file viewer

Justin Braime <[log in to unmask]>

Thu, 9 Sep 1999 07:52:23 +1200

52 lines

Re: Gerber file viewer

Wolfgang Schenke <[log in to unmask]>

Fri, 17 Sep 1999 05:42:28 -0700

55 lines

Re: Gerber file viewer

Chris Robertson <[log in to unmask]>

Fri, 17 Sep 1999 08:03:26 -0500

82 lines

Re: Gerber file viewer

Julian Coates <[log in to unmask]>

Fri, 17 Sep 1999 14:14:48 +0100

79 lines

New Thread

gerber file viewer link

gerber file viewer link

Lucas Liu <[log in to unmask]>

Wed, 8 Sep 1999 18:40:39 +0800

30 lines

Re: gerber file viewer link

Stephen R. Gregory <[log in to unmask]>

Wed, 8 Sep 1999 08:34:05 EDT

40 lines

Re: gerber file viewer link

Paul, Fred <[log in to unmask]>

Wed, 8 Sep 1999 07:44:36 -0700

47 lines

Re: gerber file viewer link

Matthew Lamkin <[log in to unmask]>

Thu, 9 Sep 1999 08:50:16 +0100

56 lines

Re: gerber file viewer link

Bill Gilman <[log in to unmask]>

Thu, 9 Sep 1999 07:42:13 -0400

197 lines

Re: gerber file viewer link

Paul, Fred <[log in to unmask]>

Wed, 15 Sep 1999 11:11:58 -0700

85 lines

New Thread

Gerber to CAD

Gerber to CAD

Yvon Hache <[log in to unmask]>

Tue, 14 Sep 1999 16:29:44 -0300

32 lines

Re: Gerber to CAD

Matthias Mansfeld <[log in to unmask]>

Tue, 14 Sep 1999 21:50:51 +0200

53 lines

Re: Gerber to CAD

Matthew Lamkin <[log in to unmask]>

Wed, 15 Sep 1999 15:26:29 +0100

72 lines

New Thread

Gerber v/s Netlist (IPC 356)

Gerber v/s Netlist (IPC 356)

Ken Patel <[log in to unmask]>

Wed, 1 Sep 1999 11:00:11 -0700

38 lines

Re: Gerber v/s Netlist (IPC 356)

Lynn Isaacson <[log in to unmask]>

Wed, 1 Sep 1999 11:23:11 -0700

77 lines

Re: Gerber v/s Netlist (IPC 356)

John Parsons <[log in to unmask]>

Wed, 1 Sep 1999 12:25:37 -0700

53 lines

Re: Gerber v/s Netlist (IPC 356)

ariehr Arieh Reichart <[log in to unmask]>

Thu, 2 Sep 1999 08:32:15 +0200

82 lines

New Thread

Gerneric copper anode spec?

Gerneric copper anode spec?

Robert Jordan <[log in to unmask]>

Fri, 22 Sep 2000 11:11:36 -0700

27 lines

Re: Gerneric copper anode spec?

Robert Welch <[log in to unmask]>

Mon, 27 Sep 1999 16:34:46 -0400

53 lines

New Thread

Gold stud bumping/Coining

Gold stud bumping/Coining

Gareth Jones <[log in to unmask]>

Mon, 27 Sep 1999 17:29:54 +0000

36 lines

New Thread

Handling Trays

Handling Trays

Richard Desrosiers <[log in to unmask]>

Wed, 8 Sep 1999 09:39:32 -0700

40 lines

Re: Handling Trays

Stephen R. Gregory <[log in to unmask]>

Wed, 8 Sep 1999 14:02:37 EDT

77 lines

Re: Handling Trays

Chad Gustafson <[log in to unmask]>

Thu, 9 Sep 1999 00:36:42 +0100

73 lines

New Thread

HASL...

HASL...

Stephen R. Gregory <[log in to unmask]>

Mon, 20 Sep 1999 11:38:33 EDT

32 lines

Re: HASL...

Hollandsworth, Ron <[log in to unmask]>

Mon, 20 Sep 1999 11:23:49 -0500

54 lines

Re: HASL...

Guenter Grossmann <[log in to unmask]>

Tue, 21 Sep 1999 09:20:58 +0200

53 lines

Re: HASL...

pod <[log in to unmask]>

Tue, 21 Sep 1999 03:56:31 -0700

141 lines

Re: HASL...

Sherry Goodell <[log in to unmask]>

Tue, 21 Sep 1999 22:50:53 -0400

210 lines

Re: HASL...

[log in to unmask]

Wed, 22 Sep 1999 15:28:26 +0800

346 lines

Re: HASL...

Guenter Grossmann <[log in to unmask]>

Wed, 22 Sep 1999 13:14:51 +0200

34 lines

Re: HASL...

Sherry Goodell <[log in to unmask]>

Wed, 22 Sep 1999 15:22:38 -0400

375 lines

New Thread

HASL/Tin

HASL/Tin

Phil Belliveau <[log in to unmask]>

Thu, 23 Sep 1999 07:03:07 -0400

36 lines

Re: HASL/Tin

[log in to unmask]

Thu, 23 Sep 1999 12:38:55 EDT

34 lines

New Thread

Height of BGA's after reflow

Height of BGA's after reflow

Eric Christison <[log in to unmask]>

Thu, 2 Sep 1999 10:20:41 -0500

32 lines

New Thread

HELP!

HELP!

Bill Ebner <[log in to unmask]>

Tue, 28 Sep 1999 15:44:12 -0400

31 lines

Re: HELP!

Eric Christison <[log in to unmask]>

Wed, 29 Sep 1999 06:54:44 -0500

46 lines

Re: HELP!

Carey Pico <[log in to unmask]>

Tue, 28 Sep 1999 20:48:27 -0700

65 lines

Re: HELP!

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 29 Sep 1999 18:31:28 +0200

77 lines

New Thread

HELP! [contact surface force]

HELP! [contact surface force]

Alderete, Michael <[log in to unmask]>

Wed, 29 Sep 1999 10:41:37 -0700

53 lines

New Thread

HELP!- heat sinks

Re: HELP!- heat sinks

Paul Klasek <[log in to unmask]>

Thu, 30 Sep 1999 09:00:49 +1000

127 lines

New Thread

Here's what I mean

Here's what I mean

Donna Perry <[log in to unmask]>

Tue, 28 Sep 1999 11:24:42 -0700

60 lines

New Thread

HISTACK, IBM-type, japs

HISTACK, IBM-type, japs

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 16 Sep 1999 09:12:03 +0200

36 lines

Re: HISTACK, IBM-type, japs

Bev Christian <[log in to unmask]>

Thu, 16 Sep 1999 08:18:10 -0400

105 lines

Re: HISTACK, IBM-type, japs

joyce <[log in to unmask]>

Thu, 16 Sep 1999 19:01:22 -0400

102 lines

Re: HISTACK, IBM-type, japs

Paul Klasek <[log in to unmask]>

Fri, 17 Sep 1999 10:13:08 +1000

161 lines

Re: HISTACK, IBM-type, japs

Carey Pico <[log in to unmask]>

Thu, 16 Sep 1999 22:15:30 -0700

136 lines

Re: HISTACK, IBM-type, japs

Roger Massey-G14195 <[log in to unmask]>

Fri, 17 Sep 1999 09:01:11 +0100

187 lines

Re: HISTACK, IBM-type, japs

Dwight Mattix <[log in to unmask]>

Fri, 17 Sep 1999 09:06:39 -0700

210 lines

Re: HISTACK, IBM-type, japs

pod <[log in to unmask]>

Fri, 17 Sep 1999 03:31:53 -0500

182 lines

Re: HISTACK, IBM-type, japs

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 20 Sep 1999 08:28:26 +0200

234 lines

Re: HISTACK, IBM-type, japs

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 20 Sep 1999 10:49:43 +0200

58 lines

New Thread

Hot: Copper plating thickness

Hot: Copper plating thickness

Ken Patel <[log in to unmask]>

Wed, 29 Sep 1999 10:42:17 -0700

36 lines

Re: Hot: Copper plating thickness

Joan M.Slade <[log in to unmask]>

Wed, 29 Sep 1999 14:14:12 -0400

66 lines

Re: Hot: Copper plating thickness

Michael D. Doty <[log in to unmask]>

Wed, 29 Sep 1999 14:39:49 -0400

66 lines

Re: Hot: Copper plating thickness

[log in to unmask]

Wed, 29 Sep 1999 14:48:00 EDT

29 lines

Re: Hot: Copper plating thickness

Ed Cosper <[log in to unmask]>

Wed, 29 Sep 1999 16:22:50 -0400

78 lines

Re: Hot: Copper plating thickness

pod <[log in to unmask]>

Wed, 29 Sep 1999 16:32:33 -0700

108 lines

New Thread

Hot: Copper plating thickness -Reply

Hot: Copper plating thickness -Reply

Alain Savard <[log in to unmask]>

Wed, 29 Sep 1999 14:32:06 -0400

65 lines

Re: Hot: Copper plating thickness -Reply

pod <[log in to unmask]>

Wed, 29 Sep 1999 14:53:27 -0700

102 lines

Re: Hot: Copper plating thickness -Reply

Gabriela Bogdan <[log in to unmask]>

Wed, 29 Sep 1999 23:54:26 +0200

124 lines

New Thread

Hot: Copper plating thickness -Reply -Reply

Re: Hot: Copper plating thickness -Reply -Reply

Alain Savard <[log in to unmask]>

Thu, 30 Sep 1999 07:46:35 -0400

67 lines

Re: Hot: Copper plating thickness -Reply -Reply

pod <[log in to unmask]>

Thu, 30 Sep 1999 13:28:34 -0700

108 lines

New Thread

how to improve plating distribution

Re: how to improve plating distribution

Eric Yakobson <[log in to unmask]>

Thu, 2 Sep 1999 13:13:15 -0400

96 lines

how to improve plating distribution

Carano,Michael <[log in to unmask]>

Thu, 2 Sep 1999 15:20:09 -0400

45 lines

New Thread

I need a domestic packaging house

I need a domestic packaging house

Rose, Daniel B <[log in to unmask]>

Thu, 30 Sep 1999 13:44:44 -0600

31 lines

Re: I need a domestic packaging house

Houston, Terri <[log in to unmask]>

Thu, 30 Sep 1999 14:53:00 -0500

45 lines

Re: I need a domestic packaging house

Alderete, Michael <[log in to unmask]>

Thu, 30 Sep 1999 16:59:27 -0700

47 lines

New Thread

I need outside cam service contacts.

I need outside cam service contacts.

Ed Cosper <[log in to unmask]>

Tue, 28 Sep 1999 12:48:15 -0400

78 lines

Re: I need outside cam service contacts.

Joan M.Slade <[log in to unmask]>

Tue, 28 Sep 1999 13:25:11 -0400

56 lines

Re: I need outside cam service contacts.

John Parsons <[log in to unmask]>

Tue, 28 Sep 1999 10:39:59 -0700

63 lines

Re: I need outside cam service contacts.

Dave Roesler <[log in to unmask]>

Tue, 28 Sep 1999 14:29:47 -0500

53 lines

Re: I need outside cam service contacts.

Kenneth G. Stephens <[log in to unmask]>

Tue, 28 Sep 1999 12:56:42 -0700

372 lines

Re: I need outside cam service contacts.

James Martin <[log in to unmask]>

Wed, 29 Sep 1999 06:28:32 -0400

74 lines

New Thread

I've got blisters on my what???!!!!!!????

I've got blisters on my what???!!!!!!????

John <[log in to unmask]>

Wed, 29 Sep 1999 21:45:56 -0400

93 lines

New Thread

Immersion Gold - How to specify?

Immersion Gold - How to specify?

Gary Crowell <[log in to unmask]>

Thu, 2 Sep 1999 09:38:58 -0600

40 lines

Re: Immersion Gold - How to specify?

Joe Aronson <[log in to unmask]>

Thu, 2 Sep 1999 17:25:21 +0100

85 lines

Re: Immersion Gold - How to specify?

pod <[log in to unmask]>

Thu, 2 Sep 1999 14:56:12 -0500

66 lines

Re: Immersion Gold - How to specify?

pod <[log in to unmask]>

Thu, 2 Sep 1999 15:00:52 -0500

112 lines

Re: Immersion Gold - How to specify?

Steve Underwood <[log in to unmask]>

Sun, 5 Sep 1999 01:45:27 -0400

72 lines

Re: Immersion Gold - How to specify?

Joe Aronson <[log in to unmask]>

Tue, 7 Sep 1999 12:38:53 +0100

106 lines

New Thread

In-Line Cleaners & IR Heaters

In-Line Cleaners & IR Heaters

Chris Bartkowiak <[log in to unmask]>

Mon, 27 Sep 1999 07:27:59 -0400

33 lines

Re: In-Line Cleaners & IR Heaters

[log in to unmask]

Mon, 27 Sep 1999 10:48:19 -0500

60 lines

New Thread

Including original message in responses - NOT

Including original message in responses - NOT

John C. Schultz <[log in to unmask]>

Tue, 28 Sep 1999 08:12:25 -0500

32 lines

Re: Including original message in responses - NOT

Mark Mazzoli <[log in to unmask]>

Tue, 28 Sep 1999 10:03:01 -0400

63 lines

Re: Including original message in responses - NOT

Edwards, Ted A (AZ75) <[log in to unmask]>

Tue, 28 Sep 1999 07:37:19 -0700

96 lines

Re: Including original message in responses - NOT

Phil Crepeau <[log in to unmask]>

Tue, 28 Sep 1999 07:43:39 -0700

95 lines

Re: Including original message in responses - NOT

Phil Crepeau <[log in to unmask]>

Tue, 28 Sep 1999 07:47:10 -0700

32 lines

Re: Including original message in responses - NOT

Bill Gilman <[log in to unmask]>

Tue, 28 Sep 1999 10:50:09 -0400

115 lines

Re: Including original message in responses - NOT

Robert Peterson <[log in to unmask]>

Tue, 28 Sep 1999 10:52:40 -0400

48 lines

Re: Including original message in responses - NOT

McMonagle, Michael R. <[log in to unmask]>

Tue, 28 Sep 1999 09:50:13 -0500

139 lines

Re: Including original message in responses - NOT

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 28 Sep 1999 11:02:02 -0400

54 lines

Re: Including original message in responses - NOT

edward Edward Szpruch <[log in to unmask]>

Tue, 28 Sep 1999 17:23:07 +0200

126 lines

Re: Including original message in responses - NOT

James Anderson x6094 <[log in to unmask]>

Tue, 28 Sep 1999 11:19:42 -0400

33 lines

Re: Including original message in responses - NOT

Hamilton, Richard CLE 4454 <[log in to unmask]>

Tue, 28 Sep 1999 08:40:30 -0700

58 lines

Re: Including original message in responses - NOT

Donna Perry <[log in to unmask]>

Tue, 28 Sep 1999 09:44:21 -0700

59 lines

Re: Including original message in responses - NOT

Franklin <[log in to unmask]>

Tue, 28 Sep 1999 12:56:04 -0500

144 lines

Re: Including original message in responses - NOT

Eric Kalgren <[log in to unmask]>

Tue, 28 Sep 1999 13:24:29 -0600

108 lines

Re: Including original message in responses - NOT

David Ricketts <[log in to unmask]>

Tue, 28 Sep 1999 12:51:30 -0700

51 lines

Re: Including original message in responses - NOT

Kelly M. Schriver <[log in to unmask]>

Tue, 28 Sep 1999 16:46:31 -0500

67 lines

Re: Including original message in responses - NOT

joyce <[log in to unmask]>

Tue, 28 Sep 1999 18:20:04 -0400

115 lines

Re: Including original message in responses - NOT

Michael Fenner <[log in to unmask]>

Tue, 28 Sep 1999 23:46:51 +0100

35 lines

New Thread

INCREASE YIELDS! - TROUBLESHOOT THE PWB MANUFACTURING PROCESS

INCREASE YIELDS! - TROUBLESHOOT THE PWB MANUFACTURING PROCESS

Dennis Maggi <[log in to unmask]>

Fri, 24 Sep 1999 15:06:35 EDT

70 lines

New Thread

Indium plating?

Indium plating?

Goldman, Patricia J. <[log in to unmask]>

Tue, 28 Sep 1999 08:49:09 -0400

33 lines

Re: Indium plating?

Michael Fenner <[log in to unmask]>

Tue, 28 Sep 1999 23:35:40 +0100

38 lines

Re: Indium plating?

Chris Evans <[log in to unmask]>

Wed, 29 Sep 1999 08:34:12 +0100

68 lines

New Thread

Industry Standard For Tracking SPQL

Industry Standard For Tracking SPQL

Jason Bragg <[log in to unmask]>

Tue, 14 Sep 1999 11:19:40 -0400

24 lines

New Thread

Info on 01/02 devices needed

Info on 01/02 devices needed

Eric Christison <[log in to unmask]>

Mon, 13 Sep 1999 10:43:27 -0500

51 lines

New Thread

Info on Ceramic PCB's needed

Re: Info on Ceramic PCB's needed

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 1 Sep 1999 08:58:12 +0200

78 lines

Re: Info on Ceramic PCB's needed

Smith Russell MSM LAPO US <[log in to unmask]>

Wed, 8 Sep 1999 01:47:00 +0200

79 lines

New Thread

Information of Sn/Pb plating thickness

Information of Sn/Pb plating thickness

su-kyoung Lee <[log in to unmask]>

Thu, 9 Sep 1999 10:12:27 +0900

36 lines

Re: Information of Sn/Pb plating thickness

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Thu, 9 Sep 1999 22:05:55 +0100

77 lines

New Thread

Internal fab shorts that happen over time.

Re: Internal fab shorts that happen over time.

John C. Schultz <[log in to unmask]>

Tue, 14 Sep 1999 08:09:00 -0500

55 lines

New Thread

Internal fab shorts that happen over time...

Internal fab shorts that happen over time...

Stephen R. Gregory <[log in to unmask]>

Fri, 10 Sep 1999 15:45:54 EDT

55 lines

Re: Internal fab shorts that happen over time...

[log in to unmask]

Fri, 10 Sep 1999 18:04:38 EDT

45 lines

Re: Internal fab shorts that happen over time...

Charles Barker <[log in to unmask]>

Fri, 10 Sep 1999 17:38:02 -0500

143 lines

Re: Internal fab shorts that happen over time...

Kelly M. Schriver <[log in to unmask]>

Sat, 11 Sep 1999 14:41:14 -0500

93 lines

Re: Internal fab shorts that happen over time...

Stephen R. Gregory <[log in to unmask]>

Fri, 10 Sep 1999 22:26:04 EDT

115 lines

Re: Internal fab shorts that happen over time...

Don Vischulis <[log in to unmask]>

Fri, 10 Sep 1999 20:07:44 -0500

80 lines

Re: Internal fab shorts that happen over time...

Jon Moore <[log in to unmask]>

Fri, 10 Sep 1999 20:04:02 EDT

28 lines

Re: Internal fab shorts that happen over time...

Werner Engelmaier <[log in to unmask]>

Sat, 11 Sep 1999 08:45:09 EDT

44 lines

Re: Internal fab shorts that happen over time...

Rudy Sedlak <[log in to unmask]>

Sat, 11 Sep 1999 20:09:07 EDT

43 lines

Re: Internal fab shorts that happen over time...

Guenter Grossmann <[log in to unmask]>

Mon, 13 Sep 1999 13:45:02 +0200

86 lines

Re: Internal fab shorts that happen over time...

Ed Cosper <[log in to unmask]>

Mon, 13 Sep 1999 08:22:10 -0400

83 lines

Re: Internal fab shorts that happen over time...

edward Edward Szpruch <[log in to unmask]>

Tue, 14 Sep 1999 07:36:30 +0200

181 lines

Re: Internal fab shorts that happen over time...

pod <[log in to unmask]>

Tue, 14 Sep 1999 02:39:50 -0700

185 lines

New Thread

Internal fab shorts that happen over time... -Reply

Internal fab shorts that happen over time... -Reply

TPE Engineering TechNet <[log in to unmask]>

Fri, 10 Sep 1999 13:10:11 -0700

30 lines

New Thread

Internal Fab Shorts...a follow-up...

Internal Fab Shorts...a follow-up...

Stephen R. Gregory <[log in to unmask]>

Mon, 20 Sep 1999 20:46:51 EDT

67 lines

Re: Internal Fab Shorts...a follow-up...

pod <[log in to unmask]>

Mon, 20 Sep 1999 23:10:24 -0700

127 lines

Re: Internal Fab Shorts...a follow-up...

pod <[log in to unmask]>

Tue, 21 Sep 1999 04:04:09 -0700

151 lines

Re: Internal Fab Shorts...a follow-up...

Gfranck <[log in to unmask]>

Tue, 21 Sep 1999 09:02:41 -0400

58 lines

Re: Internal Fab Shorts...a follow-up...

Larry Tawyea <[log in to unmask]>

Tue, 21 Sep 1999 15:22:55 EDT

31 lines

Re: Internal Fab Shorts...a follow-up...

Stephen R. Gregory <[log in to unmask]>

Tue, 21 Sep 1999 19:17:01 EDT

42 lines

Re: Internal Fab Shorts...a follow-up...

Stephen R. Gregory <[log in to unmask]>

Tue, 21 Sep 1999 19:34:22 EDT

110 lines

Re: Internal Fab Shorts...a follow-up...

pod <[log in to unmask]>

Tue, 28 Sep 1999 21:45:04 -0700

699 lines

Re: Internal Fab Shorts...a follow-up...

Paul Klasek <[log in to unmask]>

Wed, 29 Sep 1999 16:57:52 +1000

125 lines

New Thread

ionic contamination testing of circuit boards.

Re: ionic contamination testing of circuit boards.

Eric Lodangco <[log in to unmask]>

Sun, 5 Sep 1999 01:45:57 PHT

86 lines

Re: ionic contamination testing of circuit boards.

Aric Parr <[log in to unmask]>

Tue, 7 Sep 1999 10:24:35 EDT

117 lines

New Thread

IPC 610B FILLET

IPC 610B FILLET

Deakin, Roger <[log in to unmask]>

Mon, 13 Sep 1999 14:54:18 +0100

42 lines

Re: IPC 610B FILLET

Jack Crawford <[log in to unmask]>

Mon, 13 Sep 1999 17:59:48 -0500

68 lines

New Thread

IPC and Bellcore specs

IPC and Bellcore specs

JACOB MOZEL <[log in to unmask]>

Tue, 28 Sep 1999 11:15:16 +0200

87 lines

Re: IPC and Bellcore specs

Albin, David <[log in to unmask]>

Tue, 28 Sep 1999 11:23:16 +0100

54 lines

Re: IPC and Bellcore specs

Franklin <[log in to unmask]>

Tue, 28 Sep 1999 06:59:23 -0500

143 lines

Re: IPC and Bellcore specs

Zajko, Robert A (PA62) <[log in to unmask]>

Tue, 28 Sep 1999 05:38:32 -0700

74 lines

Re: IPC and Bellcore specs

Edwards, Ted A (AZ75) <[log in to unmask]>

Tue, 28 Sep 1999 09:52:19 -0700

98 lines

Re: IPC and Bellcore specs

JACOB MOZEL <[log in to unmask]>

Wed, 29 Sep 1999 11:10:44 +0200

173 lines

New Thread

IR Reflow Replacement

IR Reflow Replacement

Anne Ledger <[log in to unmask]>

Thu, 2 Sep 1999 10:51:04 -0400

38 lines

Re: IR Reflow Replacement

pod <[log in to unmask]>

Thu, 2 Sep 1999 14:53:21 -0500

70 lines

New Thread

ISA PC Card finger connector

ISA PC Card finger connector

Cyrus Ringle <[log in to unmask]>

Tue, 14 Sep 1999 10:39:18 -0700

64 lines

New Thread

isola cobrisol laminate

isola cobrisol laminate

Julie Dixon <[log in to unmask]>

Fri, 24 Sep 1999 10:24:52 EDT

32 lines

Re: isola cobrisol laminate

Jean-Marc Widmer <[log in to unmask]>

Mon, 27 Sep 1999 09:17:14 +0200

74 lines

Re: isola cobrisol laminate

Geoff Layhe <[log in to unmask]>

Mon, 27 Sep 1999 09:04:51 +0100

69 lines

New Thread

Job opening in Ireland for PCB Designer

Job opening in Ireland for PCB Designer

Brian Gaynor <[log in to unmask]>

Fri, 17 Sep 1999 10:49:14 +0100

59 lines

New Thread

Laboratories Capable of Performing IPC-TM-650, 2.3.38

Laboratories Capable of Performing IPC-TM-650, 2.3.38

Ted Stern <[log in to unmask]>

Tue, 21 Sep 1999 14:16:29 -0500

31 lines

Re: Laboratories Capable of Performing IPC-TM-650, 2.3.38

Caldon Driscoll <[log in to unmask]>

Tue, 21 Sep 1999 15:53:39 -0400

61 lines

New Thread

laminate voids

laminate voids

Brian Lane <[log in to unmask]>

Thu, 23 Sep 1999 10:17:18 -0400

35 lines

Re: laminate voids

Gfranck <[log in to unmask]>

Thu, 23 Sep 1999 11:51:33 -0400

88 lines

New Thread

Larger parts on smaller pads...

Re: Larger parts on smaller pads...

Stephen R. Gregory <[log in to unmask]>

Fri, 3 Sep 1999 19:31:30 EDT

43 lines

New Thread

ListServer.....is it just me, or?

ListServer.....is it just me, or?

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 20 Sep 1999 15:13:06 -0700

36 lines

Re: ListServer.....is it just me, or?

Chuck Brummer <[log in to unmask]>

Mon, 20 Sep 1999 15:32:36 -0700

59 lines

New Thread

log off

log off

Aura Esporlas <[log in to unmask]>

Sat, 4 Sep 1999 08:30:01 +0800

31 lines

New Thread

Looking for Quad 100 12mm Feeder parts.

Looking for Quad 100 12mm Feeder parts.

West, Jim <[log in to unmask]>

Fri, 3 Sep 1999 10:17:16 -0400

36 lines

New Thread

low tack adhesive

low tack adhesive

Kicha K <[log in to unmask]>

Mon, 13 Sep 1999 08:23:11 CDT

35 lines

New Thread

Mark Mazzoli

Mark Mazzoli

Ed Cosper <[log in to unmask]>

Mon, 13 Sep 1999 15:28:13 -0400

68 lines

Re: Mark Mazzoli

Andy KOK <[log in to unmask]>

Mon, 13 Sep 1999 22:23:41 +0200

52 lines

New Thread

maximum current on pcb

Re: maximum current on pcb

Matthew Lamkin <[log in to unmask]>

Tue, 14 Sep 1999 13:22:41 +0100

67 lines

New Thread

maximum solder joint thickness

maximum solder joint thickness

Kluz, Allen E. <[log in to unmask]>

Fri, 17 Sep 1999 09:42:08 -0500

35 lines

Re: maximum solder joint thickness

Nancy Trumbull <[log in to unmask]>

Fri, 17 Sep 1999 12:19:19 -0400

692 lines

Re: maximum solder joint thickness

Carey Pico <[log in to unmask]>

Fri, 17 Sep 1999 10:20:52 -0700

81 lines

Re: maximum solder joint thickness

Kinol, Vince <[log in to unmask]>

Fri, 17 Sep 1999 14:19:19 -0400

58 lines

Re: maximum solder joint thickness

Kluz, Allen E. <[log in to unmask]>

Fri, 17 Sep 1999 13:28:58 -0500

82 lines

Re: maximum solder joint thickness

Eric Kalgren <[log in to unmask]>

Fri, 17 Sep 1999 12:30:19 -0600

65 lines

Re: maximum solder joint thickness

KELLY M SCHRIVER <[log in to unmask]>

Fri, 17 Sep 1999 14:32:00 -0400

28 lines

Re: maximum solder joint thickness

Gabriela Bogdan <[log in to unmask]>

Fri, 17 Sep 1999 22:33:47 +0200

113 lines

Re: maximum solder joint thickness

Nancy Trumbull <[log in to unmask]>

Fri, 17 Sep 1999 15:39:38 -0400

116 lines

Re: maximum solder joint thickness

Guenter Grossmann <[log in to unmask]>

Mon, 20 Sep 1999 13:38:11 +0200

39 lines

Re: maximum solder joint thickness

Werner Engelmaier <[log in to unmask]>

Mon, 20 Sep 1999 12:57:02 EDT

59 lines

New Thread

maximum solder joint thickness ( Werners comments )

Re: maximum solder joint thickness ( Werners comments )

Guenter Grossmann <[log in to unmask]>

Tue, 21 Sep 1999 11:00:33 +0200

66 lines

Re: maximum solder joint thickness ( Werners comments )

Werner Engelmaier <[log in to unmask]>

Tue, 21 Sep 1999 14:56:12 EDT

59 lines

Re: maximum solder joint thickness ( Werners comments )

Guenter Grossmann <[log in to unmask]>

Wed, 22 Sep 1999 13:12:55 +0200

70 lines

New Thread

maximun current on pcb

maximun current on pcb

Roberto Radaelli <[log in to unmask]>

Tue, 14 Sep 1999 10:29:06 +0200

83 lines

Re: maximun current on pcb

Geoff Layhe <[log in to unmask]>

Tue, 14 Sep 1999 12:27:36 +0100

63 lines

Re: maximun current on pcb

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 14 Sep 1999 12:42:06 -0400

48 lines

New Thread

Measuring conformal coat

Measuring conformal coat

David Hipp <[log in to unmask]>

Thu, 30 Sep 1999 16:33:43 -0500

35 lines

Re: Measuring conformal coat

Kenny Bloomquist <[log in to unmask]>

Thu, 30 Sep 1999 15:26:16 -0700

57 lines

Re: Measuring conformal coat

Kelly M. Schriver <[log in to unmask]>

Thu, 30 Sep 1999 18:18:17 -0500

87 lines

Re: Measuring conformal coat

joyce <[log in to unmask]>

Thu, 30 Sep 1999 19:32:23 -0400

67 lines

New Thread

Measuring copper thickness @ in

Re: Measuring copper thickness @ in

Tom Burek <[log in to unmask]>

Thu, 16 Sep 1999 14:24:21 -0400

124 lines

Re: Measuring copper thickness @ in

Mcmaster, Michael <[log in to unmask]>

Thu, 16 Sep 1999 11:55:15 -0700

184 lines

New Thread

Measuring copper thickness @ incoming inspection

Measuring copper thickness @ incoming inspection

Brian Gaynor <[log in to unmask]>

Tue, 14 Sep 1999 08:53:02 +0100

32 lines

Re: Measuring copper thickness @ incoming inspection

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 14 Sep 1999 12:53:24 -0400

60 lines

Re: Measuring copper thickness @ incoming inspection

Mcmaster, Michael <[log in to unmask]>

Tue, 14 Sep 1999 10:19:12 -0700

91 lines

Re: Measuring copper thickness @ incoming inspection

pod <[log in to unmask]>

Tue, 14 Sep 1999 13:26:35 -0700

117 lines

New Thread

Merging Gerber Files

Merging Gerber Files

Kevin Dale Kirmse <[log in to unmask]>

Tue, 7 Sep 1999 00:23:18 -0400

35 lines

Re: Merging Gerber Files

Matthew Lamkin <[log in to unmask]>

Tue, 7 Sep 1999 08:27:27 +0100

64 lines

New Thread

Micro VIA's

Re: Micro VIA's

Steve Underwood <[log in to unmask]>

Fri, 3 Sep 1999 22:32:18 -0400

73 lines

Re: Micro VIA's

Anne Ledger <[log in to unmask]>

Tue, 7 Sep 1999 07:33:25 -0400

88 lines

Re: Micro VIA's

Dave Hoover <[log in to unmask]>

Tue, 7 Sep 1999 08:36:38 -0700

116 lines

New Thread

Mil Spec Conversion

Mil Spec Conversion

Carl Ray <[log in to unmask]>

Sat, 11 Sep 1999 06:44:23 -0500

31 lines

Re: Mil Spec Conversion

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Mon, 13 Sep 1999 15:37:19 +0100

55 lines

Re: Mil Spec Conversion

KELLY M SCHRIVER <[log in to unmask]>

Mon, 13 Sep 1999 08:31:00 -0400

31 lines

New Thread

MIL-STD-100

MIL-STD-100

KELLY M SCHRIVER <[log in to unmask]>

Fri, 17 Sep 1999 14:03:00 -0400

30 lines

New Thread

Moire interferometry

Moire interferometry

LI YUAN <[log in to unmask]>

Fri, 3 Sep 1999 16:35:24 -0600

35 lines

Re: Moire interferometry

Alderete, Michael <[log in to unmask]>

Tue, 7 Sep 1999 10:25:53 -0700

54 lines

New Thread

Moisture Proof Encapsulation

Moisture Proof Encapsulation

Les Hughson <[log in to unmask]>

Wed, 22 Sep 1999 12:42:11 +1200

53 lines

Re: Moisture Proof Encapsulation

Paul Klasek <[log in to unmask]>

Wed, 22 Sep 1999 11:37:25 +1000

105 lines

Re: Moisture Proof Encapsulation

Linda:) <[log in to unmask]>

Wed, 22 Sep 1999 10:27:20 +0800

126 lines

Re: Moisture Proof Encapsulation

Paul Klasek <[log in to unmask]>

Wed, 22 Sep 1999 16:21:58 +1000

168 lines

Re: Moisture Proof Encapsulation

Dieselberg, Ron <[log in to unmask]>

Wed, 22 Sep 1999 06:49:59 -0400

81 lines

Re: Moisture Proof Encapsulation

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 22 Sep 1999 14:11:49 +0200

77 lines

Re: Moisture Proof Encapsulation

Jon Moore <[log in to unmask]>

Sat, 25 Sep 1999 00:20:30 EDT

33 lines

New Thread

More questions about Test facilities

More questions about Test facilities

Tom Burek <[log in to unmask]>

Thu, 30 Sep 1999 17:05:28 -0400

31 lines

Re: More questions about Test facilities

Todd Thacker <[log in to unmask]>

Thu, 30 Sep 1999 15:23:05 -0600

60 lines

New Thread

Motorola TBGA480

Motorola TBGA480

Matthias Mansfeld <[log in to unmask]>

Thu, 23 Sep 1999 12:49:50 +0200

58 lines

New Thread

Multilayer SMT Voltage Suppressor

Multilayer SMT Voltage Suppressor

Jorge A Rodriguez <[log in to unmask]>

Tue, 14 Sep 1999 14:22:14 -0600

50 lines

Re: Multilayer SMT Voltage Suppressor

David Hillman <[log in to unmask]>

Wed, 15 Sep 1999 08:18:57 -0500

92 lines

New Thread

MULTILAYERS DRILLING CORRECTION

MULTILAYERS DRILLING CORRECTION

Luca Marchese <[log in to unmask]>

Sat, 11 Sep 1999 00:09:28 +0200

40 lines

New Thread

Napco Vacuum Oven

Napco Vacuum Oven

Pat Lujan <[log in to unmask]>

Wed, 1 Sep 1999 14:46:40 -0600

38 lines

Re: Napco Vacuum Oven

Chuck Brummer <[log in to unmask]>

Wed, 1 Sep 1999 14:29:20 -0700

61 lines

Re: Napco Vacuum Oven

Phil Bavaro <[log in to unmask]>

Tue, 7 Sep 1999 08:34:30 -0700

97 lines

New Thread

Need coax connector with tight tolerance in z direction

Need coax connector with tight tolerance in z direction

Houston, Terri <[log in to unmask]>

Thu, 2 Sep 1999 07:04:36 -0500

31 lines

Re: Need coax connector with tight tolerance in z direction

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 3 Sep 1999 11:58:12 +0200

64 lines

Re: Need coax connector with tight tolerance in z direction

Tracy Black <[log in to unmask]>

Tue, 7 Sep 1999 09:15:20 -0700

27 lines

Re: Need coax connector with tight tolerance in z direction

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 8 Sep 1999 08:31:31 +0200

39 lines

New Thread

NEED SOME INPUTS

NEED SOME INPUTS

Girlie Austria <[log in to unmask]>

Fri, 3 Sep 1999 15:23:59 -1200

34 lines

Re: NEED SOME INPUTS

Thomas J. Gulley <[log in to unmask]>

Fri, 3 Sep 1999 13:13:34 -0500

96 lines

NEED SOME INPUTS

Ramsey's <[log in to unmask]>

Sat, 4 Sep 1999 09:34:42 -0400

55 lines

Re: NEED SOME INPUTS

joyce <[log in to unmask]>

Sat, 4 Sep 1999 14:28:42 -0400

115 lines

Re: NEED SOME INPUTS

pod <[log in to unmask]>

Sat, 4 Sep 1999 14:42:53 -0500

173 lines

New Thread

Need to know

Need to know

Steffen, Don E <[log in to unmask]>

Wed, 22 Sep 1999 12:23:44 -0500

44 lines

Re: Need to know

Taheri, Kamran <[log in to unmask]>

Wed, 22 Sep 1999 12:37:12 -0500

72 lines

Re: Need to know

Stephen R. Gregory <[log in to unmask]>

Wed, 22 Sep 1999 13:43:26 EDT

62 lines

Re: Need to know

jason gregory <[log in to unmask]>

Wed, 22 Sep 1999 12:58:06 -0500

76 lines

Re: Need to know

Steffen, Don E <[log in to unmask]>

Wed, 22 Sep 1999 13:26:00 -0500

96 lines

Need to know

Creswick <[log in to unmask]>

Wed, 22 Sep 1999 18:02:05 -0500

34 lines

Re: Need to know

Doug Black <[log in to unmask]>

Thu, 23 Sep 1999 09:12:00 +0100

110 lines

New Thread

New Equipment - Flat Brush Scrubber

New Equipment - Flat Brush Scrubber

Bob Hull <[log in to unmask]>

Wed, 15 Sep 1999 20:02:25 -0700

25 lines

Re: New Equipment - Flat Brush Scrubber

Chuck Brummer <[log in to unmask]>

Thu, 16 Sep 1999 07:52:20 -0700

50 lines

New Thread

Nick cicruit or dish down cicuit comment?

Nick cicruit or dish down cicuit comment?

Nicholas LAI <[log in to unmask]>

Wed, 8 Sep 1999 10:22:07 +0800

37 lines

Re: Nick cicruit or dish down cicuit comment?

Werner Engelmaier <[log in to unmask]>

Wed, 8 Sep 1999 22:51:51 EDT

46 lines

New Thread

No Chromate Test, but an alternate

No Chromate Test, but an alternate

Rudy Sedlak <[log in to unmask]>

Wed, 22 Sep 1999 10:36:12 EDT

40 lines

Re: No Chromate Test, but an alternate

Michael Newman <[log in to unmask]>

Wed, 22 Sep 1999 23:46:49 GMT

82 lines

New Thread

No contact test system

No contact test system

Edward G. Shea <[log in to unmask]>

Thu, 23 Sep 1999 12:50:06 -0700

57 lines

Re: No contact test system

Erat, Wolfgang <[log in to unmask]>

Thu, 23 Sep 1999 16:36:34 -0400

42 lines

New Thread

Non-technical question

Non-technical question

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 6 Sep 1999 14:20:20 +0200

27 lines

Re: Non-technical question

Matthew Lamkin <[log in to unmask]>

Mon, 6 Sep 1999 14:11:08 +0100

55 lines

Re: Non-technical question

Stephen R. Gregory <[log in to unmask]>

Mon, 6 Sep 1999 11:27:49 EDT

130 lines

Non-technical question

Michael Fenner <[log in to unmask]>

Mon, 6 Sep 1999 20:00:04 +0100

59 lines

Re: Non-technical question

Michael Fenner <[log in to unmask]>

Mon, 6 Sep 1999 19:50:30 +0100

75 lines

New Thread

Nontechnical question

Re: Nontechnical question

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 7 Sep 1999 08:52:15 +0200

41 lines

New Thread

Not read: [TN] Thermode soldering

Not read: [TN] Thermode soldering

Hooper Doug <[log in to unmask]>

Fri, 24 Sep 1999 06:41:00 -0400

25 lines

New Thread

Okay, try not to laugh...

Okay, try not to laugh...

Stephen R. Gregory <[log in to unmask]>

Tue, 21 Sep 1999 17:39:33 EDT

64 lines

Re: Okay, try not to laugh...

Phil Crepeau <[log in to unmask]>

Tue, 21 Sep 1999 16:39:52 -0700

102 lines

Re: Okay, try not to laugh...

rampinc <[log in to unmask]>

Tue, 21 Sep 1999 18:40:55 -0700

102 lines

Re: Okay, try not to laugh...

Stephen R. Gregory <[log in to unmask]>

Tue, 21 Sep 1999 20:13:30 EDT

95 lines

Re: Okay, try not to laugh...

Rudy Sedlak <[log in to unmask]>

Tue, 21 Sep 1999 20:13:34 EDT

42 lines

Re: Okay, try not to laugh...

joyce <[log in to unmask]>

Wed, 22 Sep 1999 06:09:29 -0400

126 lines

Re: Okay, try not to laugh...

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Wed, 22 Sep 1999 14:37:05 +0100

91 lines

Re: Okay, try not to laugh...

Michael Fenner <[log in to unmask]>

Wed, 22 Sep 1999 20:34:55 +0100

94 lines

New Thread

Ol Maildemon Played Gotcha

Ol Maildemon Played Gotcha

KELLY M SCHRIVER <[log in to unmask]>

Fri, 3 Sep 1999 14:03:00 -0400

54 lines

New Thread

Omegameter Question

Re: Omegameter Question

Ramsey's <[log in to unmask]>

Wed, 1 Sep 1999 06:38:39 -0400

66 lines

New Thread

Organizational Meeting, Smoky Mountain Designers Council

Organizational Meeting, Smoky Mountain Designers Council

Thomas Martin <[log in to unmask]>

Mon, 13 Sep 1999 17:44:44 -0400

39 lines

New Thread

OSP'S

OSP'S

[log in to unmask]

Fri, 3 Sep 1999 17:08:26 EDT

28 lines

Re: OSP'S

<Brian F. Griffith> <[log in to unmask]>

Sat, 4 Sep 1999 10:08:44 EDT

36 lines

New Thread

Overcooked latex residues

Overcooked latex residues

Graham Naisbitt <[log in to unmask]>

Tue, 21 Sep 1999 12:08:43 +0100

123 lines

New Thread

Oz of Copper v/s surface area

Oz of Copper v/s surface area

Ken Patel <[log in to unmask]>

Thu, 9 Sep 1999 12:51:37 -0700

34 lines

Re: Oz of Copper v/s surface area

Ian McMillan <[log in to unmask]>

Thu, 9 Sep 1999 13:17:34 -0700

63 lines

Re: Oz of Copper v/s surface area

McGlaughlin, Jeffrey A <[log in to unmask]>

Thu, 9 Sep 1999 16:19:54 -0400

67 lines

Re: Oz of Copper v/s surface area

George Milad <[log in to unmask]>

Thu, 9 Sep 1999 20:12:29 EDT

28 lines

Re: Oz of Copper v/s surface area

Tom Burek <[log in to unmask]>

Thu, 9 Sep 1999 20:21:36 -0400

66 lines

Re: Oz of Copper v/s surface area

Werner Engelmaier <[log in to unmask]>

Thu, 9 Sep 1999 23:08:16 EDT

38 lines

New Thread

Packaging House

Packaging House

Dang, Kiet <[log in to unmask]>

Thu, 9 Sep 1999 10:56:12 -0700

29 lines

New Thread

Packaging machines

Packaging machines

Tempea, Ioan <[log in to unmask]>

Tue, 14 Sep 1999 14:14:57 -0400

35 lines

New Thread

Pad Sizes for good solder Joints

Pad Sizes for good solder Joints

Mark Holmes <[log in to unmask]>

Fri, 24 Sep 1999 09:09:21 +0100

53 lines

Re: Pad Sizes for good solder Joints

Jack Olson <[log in to unmask]>

Fri, 24 Sep 1999 09:16:48 -0700

59 lines

New Thread

Pad Sizing

Pad Sizing

Ian Slater <[log in to unmask]>

Tue, 28 Sep 1999 11:59:19 -0600

38 lines

New Thread

Part numbering system

Part numbering system

West, Jim <[log in to unmask]>

Fri, 24 Sep 1999 11:22:29 -0400

39 lines

Re: Part numbering system

Wolfe, Robert <[log in to unmask]>

Fri, 24 Sep 1999 11:53:12 -0400

103 lines

Re: Part numbering system

Tempea, Ioan <[log in to unmask]>

Fri, 24 Sep 1999 12:40:44 -0400

87 lines

Re: Part numbering system

Keel, Mike <[log in to unmask]>

Fri, 24 Sep 1999 09:54:50 -0700

100 lines

Re: Part numbering system

Rick Thompson <[log in to unmask]>

Fri, 24 Sep 1999 10:21:37 -0700

97 lines

Re: Part numbering system

Jorge Engenharia <[log in to unmask]>

Fri, 24 Sep 1999 14:19:31 -0300

129 lines

Re: Part numbering system

Glenn Pelkey <[log in to unmask]>

Fri, 24 Sep 1999 10:58:54 PDT

35 lines

Re: Part numbering system

Gary Crowell <[log in to unmask]>

Fri, 24 Sep 1999 12:46:33 -0600

41 lines

Re: Part numbering system

David Hipp <[log in to unmask]>

Fri, 24 Sep 1999 14:32:21 -0500

98 lines

Re: Part numbering system

Keel, Mike <[log in to unmask]>

Fri, 24 Sep 1999 14:24:10 -0700

86 lines

Re: Part numbering system

Lothar Thole <[log in to unmask]>

Mon, 27 Sep 1999 08:45:45 +0900

70 lines

Re: Part numbering system

Matthew Lamkin <[log in to unmask]>

Mon, 27 Sep 1999 09:24:32 +0100

57 lines

Re: Part numbering system

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 27 Sep 1999 08:16:03 -0700

92 lines

Re: Part numbering system

Justin Braime <[log in to unmask]>

Tue, 28 Sep 1999 07:55:50 +1200

194 lines

New Thread

pc 101

pc 101

jason gregory <[log in to unmask]>

Fri, 10 Sep 1999 11:15:33 -0500

30 lines

Re: pc 101

Graham Naisbitt <[log in to unmask]>

Fri, 10 Sep 1999 18:14:39 +0100

75 lines

New Thread

PCB (PWB For the USA) Manufacturers

PCB (PWB For the USA) Manufacturers

Paul Brown <[log in to unmask]>

Tue, 28 Sep 1999 21:45:58 +0100

27 lines

Re: PCB (PWB For the USA) Manufacturers

Joseph E. J. Duclos Jr. <[log in to unmask]>

Tue, 28 Sep 1999 22:59:56 -0400

61 lines

Re: PCB (PWB For the USA) Manufacturers

Royce Taylor <[log in to unmask]>

Wed, 29 Sep 1999 06:29:16 -0400

99 lines

Re: PCB (PWB For the USA) Manufacturers

Charles E. McMahon <[log in to unmask]>

Tue, 28 Sep 1999 18:04:26 -0400

61 lines

Re: PCB (PWB For the USA) Manufacturers

Anne Ledger <[log in to unmask]>

Wed, 29 Sep 1999 08:08:24 -0400

60 lines

Re: PCB (PWB For the USA) Manufacturers

Joan M.Slade <[log in to unmask]>

Wed, 29 Sep 1999 09:24:42 -0400

42 lines

Re: PCB (PWB For the USA) Manufacturers

Dr. M. Stampanoni <[log in to unmask]>

Wed, 29 Sep 1999 19:36:17 +0200

61 lines

New Thread

PCB design shops

PCB design shops

Houston, Terri <[log in to unmask]>

Thu, 16 Sep 1999 06:51:58 -0500

28 lines

Re: PCB design shops

Paul Brown <[log in to unmask]>

Thu, 16 Sep 1999 21:11:32 +0100

58 lines

Re: PCB design shops

Edwards, Ted A (AZ75) <[log in to unmask]>

Thu, 16 Sep 1999 15:56:43 -0700

63 lines

Re: PCB design shops

Thomas Martin <[log in to unmask]>

Fri, 17 Sep 1999 10:00:16 -0400

39 lines

Re: PCB design shops

Mauricio Castro <[log in to unmask]>

Mon, 20 Sep 1999 08:33:07 PDT

81 lines

New Thread

pcb manufacturers

pcb manufacturers

Julie Dixon <[log in to unmask]>

Wed, 29 Sep 1999 09:28:02 EDT

38 lines

Re: pcb manufacturers

Julie Dixon <[log in to unmask]>

Wed, 29 Sep 1999 13:43:41 EDT

31 lines

PCB Manufacturers

Paul Brown <[log in to unmask]>

Wed, 29 Sep 1999 22:39:11 +0100

41 lines

Re: PCB Manufacturers

Joy, Stephen C <[log in to unmask]>

Wed, 29 Sep 1999 15:03:48 -0700

24 lines

Re: PCB Manufacturers

George Gerberick <[log in to unmask]>

Wed, 29 Sep 1999 15:39:01 -0700

63 lines

Re: PCB Manufacturers

Pat Brooks <[log in to unmask]>

Wed, 29 Sep 1999 18:02:38 -0500

97 lines

Re: PCB Manufacturers

James Patten <[log in to unmask]>

Wed, 29 Sep 1999 15:19:47 -0700

80 lines

Re: PCB Manufacturers

Richard Mazzoli <[log in to unmask]>

Wed, 29 Sep 1999 19:09:46 EDT

59 lines

Re: PCB Manufacturers

Richard Mazzoli <[log in to unmask]>

Wed, 29 Sep 1999 19:13:00 EDT

31 lines

Re: PCB Manufacturers

Bev Christian <[log in to unmask]>

Wed, 29 Sep 1999 18:48:02 -0500

111 lines

Re: PCB Manufacturers

Anil K.Singh <[log in to unmask]>

Thu, 30 Sep 1999 05:44:28 +0530

97 lines

Re: PCB Manufacturers

Charles E. McMahon <[log in to unmask]>

Wed, 29 Sep 1999 21:24:01 -0400

93 lines

Re: PCB Manufacturers

Keith Larson <[log in to unmask]>

Wed, 29 Sep 1999 22:00:43 -0500

136 lines

Re: PCB Manufacturers

pod <[log in to unmask]>

Wed, 29 Sep 1999 22:16:08 -0700

80 lines

Re: PCB Manufacturers

Paul Klasek <[log in to unmask]>

Thu, 30 Sep 1999 15:23:36 +1000

129 lines

Re: PCB Manufacturers

edward Edward Szpruch <[log in to unmask]>

Thu, 30 Sep 1999 07:49:08 +0200

116 lines

Re: PCB Manufacturers

John Price <[log in to unmask]>

Thu, 30 Sep 1999 08:53:13 +0000

77 lines

Re: PCB Manufacturers

Richard Mazzoli <[log in to unmask]>

Thu, 30 Sep 1999 06:07:00 EDT

33 lines

Re: PCB Manufacturers

Franklin <[log in to unmask]>

Thu, 30 Sep 1999 07:39:02 -0500

197 lines

Re: PCB Manufacturers

Scott A. Bowles <[log in to unmask]>

Thu, 30 Sep 1999 08:33:24 EDT

69 lines

Re: pcb manufacturers

William Anderson <[log in to unmask]>

Thu, 30 Sep 1999 08:51:47 -0500

149 lines

Re: pcb manufacturers

James Patten <[log in to unmask]>

Thu, 30 Sep 1999 08:34:43 -0700

128 lines

Re: PCB Manufacturers

Jack Olson <[log in to unmask]>

Thu, 30 Sep 1999 10:24:25 -0700

65 lines

Re: pcb manufacturers

pod <[log in to unmask]>

Thu, 30 Sep 1999 13:37:59 -0700

198 lines

Re: PCB Manufacturers

Kelly M. Schriver <[log in to unmask]>

Thu, 30 Sep 1999 17:35:28 -0500

119 lines

Re: PCB Manufacturers

Kelly M. Schriver <[log in to unmask]>

Thu, 30 Sep 1999 17:43:30 -0500

109 lines

New Thread

PCB Manufacturers -Reply

PCB Manufacturers -Reply

TPE Engineering TechNet <[log in to unmask]>

Wed, 29 Sep 1999 14:59:55 -0700

29 lines

New Thread

PCB Manufacturers following/contributing to TechNet

PCB Manufacturers following/contributing to TechNet

Paul, Fred <[log in to unmask]>

Wed, 29 Sep 1999 09:12:24 -0700

33 lines

New Thread

PCB related reading material

PCB related reading material

West, Jim <[log in to unmask]>

Wed, 15 Sep 1999 14:03:56 -0400

36 lines

New Thread

PCB use 1 OZ & H OZ copper

PCB use 1 OZ & H OZ copper

Wang, William (Suzhou Laminate) <[log in to unmask]>

Sun, 12 Sep 1999 18:39:00 -0700

33 lines

Re: PCB use 1 OZ & H OZ copper

Roland <[log in to unmask]>

Mon, 13 Sep 1999 07:10:39 +0200

91 lines

Re: PCB use 1 OZ & H OZ copper

Wang, William (Suzhou Laminate) <[log in to unmask]>

Sun, 12 Sep 1999 22:51:00 -0700

111 lines

Re: PCB use 1 OZ & H OZ copper

joyce <[log in to unmask]>

Mon, 13 Sep 1999 06:37:15 -0400

127 lines

Re: PCB use 1 OZ & H OZ copper

Hinners Hans CIV WRALC/LYPME <[log in to unmask]>

Mon, 13 Sep 1999 15:35:49 +0100

61 lines

Re: PCB use 1 OZ & H OZ copper

Steve Underwood <[log in to unmask]>

Fri, 17 Sep 1999 06:23:09 -0400

158 lines

New Thread

PCB's for lead free soldering

PCB's for lead free soldering

Guenter Grossmann <[log in to unmask]>

Fri, 3 Sep 1999 09:19:53 +0200

41 lines

New Thread

Peelable Solder Mask

Peelable Solder Mask

Hamilton, Richard CLE 4454 <[log in to unmask]>

Wed, 15 Sep 1999 15:51:55 -0700

35 lines

Re: Peelable Solder Mask

pod <[log in to unmask]>

Wed, 15 Sep 1999 18:23:56 -0700

69 lines

New Thread

Phosphorus content in Electroless Nickel

Phosphorus content in Electroless Nickel

Ken Patel <[log in to unmask]>

Wed, 22 Sep 1999 17:07:40 -0700

36 lines

Re: Phosphorus content in Electroless Nickel

Rudy Sedlak <[log in to unmask]>

Thu, 23 Sep 1999 10:18:30 EDT

34 lines

Re: Phosphorus content in Electroless Nickel

Eric Yakobson <[log in to unmask]>

Thu, 23 Sep 1999 14:23:29 -0400

79 lines

Re: Phosphorus content in Electroless Nickel

Chris Evans <[log in to unmask]>

Tue, 28 Sep 1999 12:49:52 +0100

71 lines

New Thread

Pick 'n' Place machines

Pick 'n' Place machines

Vinit Verma <[log in to unmask]>

Mon, 6 Sep 1999 16:57:49 -0000

36 lines

New Thread

Pick N Place Equipment

Re: Pick N Place Equipment

Vinit Verma <[log in to unmask]>

Mon, 6 Sep 1999 16:20:40 -0000

70 lines

Re: Pick N Place Equipment

Ryan Grant <[log in to unmask]>

Wed, 1 Sep 1999 06:08:43 -0600

112 lines

Re: Pick N Place Equipment

Severson, Scott M. <[log in to unmask]>

Wed, 1 Sep 1999 07:14:36 -0500

73 lines

Re: Pick N Place Equipment

Caldon Driscoll <[log in to unmask]>

Wed, 1 Sep 1999 08:12:38 -0400

68 lines

Re: Pick N Place Equipment

Manon Dutil <[log in to unmask]>

Wed, 1 Sep 1999 08:40:09 -0400

73 lines

Re: Pick N Place Equipment

McMonagle, Michael R. <[log in to unmask]>

Wed, 1 Sep 1999 08:15:20 -0500

76 lines

Re: Pick N Place Equipment

Jerry Cupples <[log in to unmask]>

Thu, 2 Sep 1999 15:19:47 -0500

57 lines

Re: Pick N Place Equipment

Paul Klasek <[log in to unmask]>

Fri, 3 Sep 1999 09:50:22 +1000

85 lines

New Thread

Pick N Place Equipment and 0402's

Re: Pick N Place Equipment and 0402's

Paul <[log in to unmask]>

Wed, 1 Sep 1999 18:38:19 -0400

113 lines

New Thread

Pick N Place Equipment and 0402's But Different Question

Re: Pick N Place Equipment and 0402's But Different Question

David Hillman <[log in to unmask]>

Thu, 2 Sep 1999 08:14:41 -0500

82 lines

New Thread

Plasma and PTFE

Plasma and PTFE

Dave Hoover <[log in to unmask]>

Mon, 27 Sep 1999 11:37:00 -0700

32 lines