LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


November 1998


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

ÄTNÅ HASL (1 message)
TN HASL (1 message)
(FAB)Pad lift & Cracking (2 messages)
0.004" trace/space technology (4 messages)
11,5 oz Double Sided FR4 (3 messages)
1mm PBGA Assembly (3 messages)
2220 ceramic cap failure (3 messages)
3 legged transistors (4 messages)
: Actel CQ132 (2 messages)
: Cause and Corrective Action (1 message)
: Printer printing accuracy and repeatability. (2 messages)
: Testing of OCC board. (1 message)
<No subject> (16 messages)
Accurately Positioning Components on PWBs (2 messages)
Alpha wire FIT-130 product line. (1 message)
Annular Ring ! (4 messages)
Annular Ring!- May we have an arbiter please...Paging Mr. ... (2 messages)
Annular Ring!- May we have an arbiter please...Paging Mr. Coyle! (1 message)
Assembly : temp. profile for glue cure (1 message)
Assembly: temp. profile for glue cure (1 message)
ASSY : Wavesoldering : Dross formation (4 messages)
Assy: Contact CS-400E Efficiency (4 messages)
Assy: Low quantity Press-fit connector tip... (4 messages)
ASSY: Modified ETFE Insulation (1 message)
Assy: QFP leadframe tin-lead finish (10 messages)
Assy: Solder-ball FAQ (1 message)
Assy: stencil cleaning liquid temps (2 messages)
assy: tin at $2.48/lb (1 message)
assy: wave solder fingers (2 messages)
ASSY:mixing of high and low-temp PbSn alloys (1 message)
Attaching Al heatsink to Si die (7 messages)
auto dosing systems (2 messages)
Auto Insertion of Triacs (1 message)
AVX Multiguard and Current Leakage Issues (1 message)
AW: [TN] Electroless Nickel for Aluminum (2 messages)
Backfill Recommendation (2 messages)
Bare Board imperfections (5 messages)
Bare Board imperfections -Reply (1 message)
Bare Die Supplier (1 message)
Bareboard imperfections (1 message)
Bend/flex (4 messages)
BGA rework question (3 messages)
BGA Shelf Life (1 message)
BGA X-ray (1 message)
BGA X-ray inspection (1 message)
Blind vias (1 message)
Board Assembly Quoting (1 message)
card edge connectors (1 message)
CEM 1 vs G10 (3 messages)
Chemring (3 messages)
Cleaning Solder Pallets (2 messages)
Cleaning Un-cured SMA (1 message)
COG mounting techniques (1 message)
company address (3 messages)
Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts (2 messages)
Conformal Coating Needed?? (2 messages)
Conformal Coatings (2 messages)
conformal coating[SHEEN CUP 401/4 specification] (3 messages)
Copper Plating (7 messages)
Copper plating & Copper thickness (9 messages)
copper plating and anode area (1 message)
Copper plating Anode ratio (2 messages)
Corrrection Annular Ring ! (1 message)
Counter Sunk Screws to mount PCBs (3 messages)
Covering Vias (2 messages)
Daisy chain (3 messages)
DEK GSX265 PROFLOW HEAD UPDATE (1 message)
DES: Pressfit Connectors & White Tin (2 messages)
dewetting (1 message)
DFM for SMT Spec. (2 messages)
Direct Bond Copper (1 message)
Electroless Nickel for Aluminum (1 message)
electroless pth (2 messages)
Electroplating and Surface Finishing Society National Convention (1 message)
ENC: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (1 message)
Epoxy Stencil Design? (3 messages)
Epoxy Stencil Design? -Reply (1 message)
FAB: Cupric Chloride etching (7 messages)
Failure of Rigid Flex (1 message)
Finding the man who helped me !(+/-3mill) (1 message)
FINE LINE COPPER PLATING (8 messages)
Fine pitch (1 message)
Fine Pitch info (2 messages)
fixing exposed copper/traces (3 messages)
Flex to FR4 with hot bar (1 message)
Flexible Circuits (3 messages)
Flexible Conformal Coating (1 message)
Flying Grid Bare Board Testers (1 message)
FOR YOUR HELP (3 messages)
FR4 properties (3 messages)
Fume Extraction for Manual Soldering (2 messages)
FW: [TN] Moisture Sensitive Devices (1 message)
FW: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (2 messages)
FW: [TN] Temp Profiling (1 message)
FW: [TN] True Position and Registration on Fab (1 message)
Fwd: [TN] Copper plating & Copper thickness (1 message)
Fwd:Through hole vs SMT (1 message)
GenCAM (1 message)
Gold Finger Stains (4 messages)
Gold Finger Stains & Contact Resistance. (1 message)
Gold mask etchant (3 messages)
HASL (12 messages)
Heat Sinks on PWBs (3 messages)
Heated ET (5 messages)
Helium leak rate measurements. (1 message)
Help locating PCB drill bits (1 message)
Help needed on PBGA Wire Bonding (1 message)
help! -- how to meet the +/-3mil(0.076mm)routing tolerance (1 message)
hole plug source (4 messages)
Hot Bar Production Methods (2 messages)
IL Clearance Calculation (1 message)
Immersion Gold SMT PWB (1 message)
Immesion Tin (The other White meat) (2 messages)
Info on Nelco-6 laminate material (2 messages)
Inks used for Test Stamps on PCBs (2 messages)
Intel uBGA Flash, Bottom Side SMT? (1 message)
Intermittent Dewetting (2 messages)
IPC 4101 (2 messages)
IPC Designers Council Elections (1 message)
IPC News Release: IPC Creates Equipment Exchange Website (1 message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trad... (1 message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trade ... (1 message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show (2 messages)
IPC News Release: IPC/SMEMA Council to Intoduce newTrade ... (1 message)
Jay DeKing (1 message)
KODAK 960 FILM PROCESSOR (1 message)
Laminate (2 messages)
Layers Count vs Thickness (1 message)
Lead bending. (2 messages)
Lead-Free legislation (2 messages)
life time of Ni/Au contacts? (2 messages)
Lines Between Pins (1 message)
Logic Device, drop test failure (3 messages)
Looking for dummy ceramic QFP parts (4 messages)
Marking Pen (1 message)
Marking systems (2 messages)
mcm designers (1 message)
measuring Shear Force (1 message)
Melting point of 90/10 and 95/5 solder (5 messages)
Microscopes & Cross Sectioning equipment for HDIS (2 messages)
MIL-1235 - Replaced ?? (2 messages)
MIL-C-28809 (3 messages)
modulus & Poisson's ratio (2 messages)
Moisture sensitive (2 messages)
Moisture Sensitive Devices (4 messages)
mounting SOIC using Chipshooter (3 messages)
neckdown (4 messages)
Need a Number - Solder Station One (3 messages)
Need help (2 messages)
Need Kleenox "P" MSDS and information (2 messages)
Need PCB Designer in Houston (2 messages)
need test lab for no clean process (3 messages)
Ni/Pd/Au Lead Finish (2 messages)
No SUBJECT e-mail (1 message)
non wetting agent for epoxy resin (1 message)
OSP Dwell between thermal processes (1 message)
Overcoat Pen (1 message)
P and B content in electroless nickel (1 message)
PANEL AGITATION IN DEEP NICKEL/GOLD PLATING. (1 message)
Parylene Conformal Coating (2 messages)
Pattern Copper Plating (3 messages)
Pb in ceramic components (4 messages)
PCB ASSEMBLY COST ANALYSIS (1 message)
PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION (2 messages)
PCBA Routing Survey (3 messages)
Problem in Gold Plating (6 messages)
Problem in Gold Plating -Reply (1 message)
Process courses (2 messages)
Protective laminate (1 message)
Pulse Plating - Copper (1 message)
Pulse Plating Versus DC Plating (1 message)
Pulse Plating: Cu and PCB (1 message)
Q on Ion Chromatography (1 message)
QFP leadframe tin-lead finish (4 messages)
Quoting Board Builds (1 message)
Quoting Board Builds -Reply (1 message)
Re Cause/Effect (1 message)
Re Gold (1 message)
Re Repair Limits (1 message)
Re SolderBalls (7 messages)
RE True Position and Registration on Fab (1 message)
ReCard Edge Connectors (1 message)
Recent Discussion on Ni/Pd Finished ICs (1 message)
ReEnvironControl (1 message)
Reflow ovens (1 message)
Removing wet SMT epoxy from flex circuits.... (2 messages)
Repair Limits (2 messages)
Resource needed for Palladium/Nickel Service (2 messages)
Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (1 message)
Re[2]: [TN] Soldering to Gold (1 message)
rogers (4 messages)
Scoring PCAs (2 messages)
Screenprint problems (3 messages)
Seed for Cu plating in high freq. (1 message)
Selective Soldering (3 messages)
Selective Soldering Machine (2 messages)
shear testers (2 messages)
Shelf life of HASL fabs. (2 messages)
SIGNOFF * (1 message)
silver migration (5 messages)
Simple Component Source. (2 messages)
SMEMA Printer and SMPI Conveyors (2 messages)
SMT Glue (2 messages)
SMT solder balls (1 message)
SMT ZENER (2 messages)
SMTA Silicon Valley mtg DFM & ESMT Design for Manuf (1 message)
Solder balls on chip components (3 messages)
solder comparisons (1 message)
Solder mask Dimple Plates (1 message)
Solder Mixing (1 message)
Solder on goldfinger (1 message)
solder paste inquery (1 message)
Solder paste inspection (1 message)
Solder Paste???? (2 messages)
solder resist between solder land to prevent solder brid ging (1 message)
solder resist between solder land to prevent solder bridging (1 message)
Solderability Head Scratcher (2 messages)
Soldering Palladium plated leads (1 message)
Soldering to Gold (4 messages)
Soldermask adhesion over tin/lead (2 messages)
Soldermask adhesion over tin/lead -Reply (1 message)
Soldermask Breakdown in Humidity Chamber (2 messages)
SOLDERMASK PLUGGED VIAS (1 message)
Soldermask surface prep (1 message)
SPC (5 messages)
Spec ref for lifted pad after assy (3 messages)
Specctra router Question (1 message)
Specification (1 message)
SRT (3 messages)
Standards (1 message)
Stripping Enamel covered wires (2 messages)
Subj: Re: [TN] SMT ZENER (3 messages)
Subscribe (1 message)
Syracuse Area DC Chapter (1 message)
Temp & Humidity in SMT plant. (1 message)
Temp Profiling (3 messages)
Test message - please disregard (1 message)
TEST: Flying "Grid", not "Probe" (1 message)
Thermal Resistance Testing labs (1 message)
THERMOPLASTIC RELIABILITY (5 messages)
Tin Oxide (8 messages)
Tin/Lead Solder Coating Minimum Thickness Requirements (11 messages)
Touch Up Pen's (2 messages)
True Position and Registration on Fab (3 messages)
Unclad FR4 Laminate? (1 message)
UV Cure Touchup (1 message)
Via holes on SMD pads? (4 messages)
Vision Systems for inspection (3 messages)
Visual Inspection of Misprinted boards after cleaning (2 messages)
wage and rates for QA managers (2 messages)
Wanted: Motorola BGA (1 message)
wash mashine noise on assembly floor (4 messages)
Wave Solder Fixtures (9 messages)
Weird Wave Soldering Defect... (7 messages)
Wet lamination (1 message)
What happens when polarising occurs (1 message)
Wierd Wavesoldering defect (1 message)
Will insufficient solder cause high loss (1 message)
Working Environment Controls (1 message)
your mail (1 message)
your warning (4 messages)
[Fwd: Solder-ball] (3 messages)
[TN] Annular Ring ! (1 message)
[TN] Intermittent Dewetting (1 message)
[TN] Weird Wave Soldering Defect... (1 message)
[TN] [Fwd: Solder-ball] (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

ÄTNÅ HASL

RE: ÄTNÅ HASL

Tegehall Per-Erik <[log in to unmask]>

Mon, 30 Nov 1998 09:36:15 +0100

151 lines

New Thread

TN HASL

TN HASL

[log in to unmask]

Mon, 30 Nov 1998 09:20:10 -0600

36 lines

New Thread

(FAB)Pad lift & Cracking

(FAB)Pad lift & Cracking

Colin <[log in to unmask]>

Fri, 20 Nov 1998 04:04:02 -0600

55 lines

Re: (FAB)Pad lift & Cracking

Robert Welch <[log in to unmask]>

Fri, 20 Nov 1998 10:12:03 -0500

95 lines

New Thread

0.004" trace/space technology

0.004" trace/space technology

Susan Harrington <[log in to unmask]>

Tue, 17 Nov 1998 08:58:27 -0600

40 lines

Re: 0.004" trace/space technology

[log in to unmask]

Tue, 17 Nov 1998 10:29:22 -0600

106 lines

0.004" trace/space technology

Timothy A. Estes <[log in to unmask]>

Tue, 17 Nov 1998 11:36:01 -0700

54 lines

0.004" trace/space technology

[log in to unmask]

Tue, 17 Nov 1998 13:06:16 -0600

38 lines

New Thread

11,5 oz Double Sided FR4

11,5 oz Double Sided FR4

Neil Atkinson <[log in to unmask]>

Wed, 4 Nov 1998 07:43:17 -0000

36 lines

11,5 oz Double Sided FR4

[log in to unmask]

Wed, 4 Nov 1998 08:55:17 -0600

96 lines

Re: 11,5 oz Double Sided FR4

<Rashesh Patel> <[log in to unmask]>

Wed, 4 Nov 1998 15:56:34 EST

26 lines

New Thread

1mm PBGA Assembly

1mm PBGA Assembly

Yves Trudell <[log in to unmask]>

Fri, 13 Nov 1998 12:20:03 -0500

32 lines

Re: 1mm PBGA Assembly

Bill Davis <[log in to unmask]>

Mon, 16 Nov 1998 08:30:52 -0800

92 lines

Re: 1mm PBGA Assembly

Jindra, Larry <[log in to unmask]>

Mon, 16 Nov 1998 14:11:42 -0800

76 lines

New Thread

2220 ceramic cap failure

2220 ceramic cap failure

Ian Squires <[log in to unmask]>

Tue, 3 Nov 1998 10:34:54 PST

66 lines

Re: 2220 ceramic cap failure

Paul Klasek <[log in to unmask]>

Wed, 4 Nov 1998 08:40:49 +1100

131 lines

Re: 2220 ceramic cap failure

Bill Davis <[log in to unmask]>

Tue, 3 Nov 1998 14:02:02 -0800

120 lines

New Thread

3 legged transistors

Re: 3 legged transistors

<Jason M. Smith> <[log in to unmask]>

Mon, 9 Nov 1998 10:45:13 -0500

29 lines

Re: 3 legged transistors

Mark Austin <[log in to unmask]>

Mon, 9 Nov 1998 16:44:00 +0000

96 lines

Re: 3 legged transistors

Ryan Jennens <[log in to unmask]>

Mon, 9 Nov 1998 11:42:06 -0500

65 lines

Re: 3 legged transistors

Gary Camac <[log in to unmask]>

Mon, 9 Nov 1998 10:35:44 -0600

52 lines

New Thread

: Actel CQ132

: Actel CQ132

Kasprzak, Bill (esd) US <[log in to unmask]>

Tue, 10 Nov 1998 15:25:00 PST

52 lines

Re: : Actel CQ132

Jim Marsico 516-595-5879 <[log in to unmask]>

Wed, 11 Nov 1998 08:18:00 -0500

73 lines

New Thread

: Cause and Corrective Action

: Cause and Corrective Action

Kasprzak, Bill (esd) US <[log in to unmask]>

Mon, 23 Nov 1998 15:24:00 PST

46 lines

New Thread

: Printer printing accuracy and repeatability.

: Printer printing accuracy and repeatability.

Poh Kong Hui <[log in to unmask]>

Sat, 7 Nov 1998 00:43:18 +0800

37 lines

Re: : Printer printing accuracy and repeatability.

Stephen R. Gregory <[log in to unmask]>

Fri, 6 Nov 1998 14:25:52 EST

70 lines

New Thread

: Testing of OCC board.

: Testing of OCC board.

Poh Kong Hui <[log in to unmask]>

Sun, 22 Nov 1998 22:41:12 +0800

26 lines

New Thread

<No subject>

<No subject>

Dennis Ward <[log in to unmask]>

Wed, 4 Nov 1998 13:28:51 -0500

30 lines

<No subject>

Steve Vetter <[log in to unmask]>

Wed, 4 Nov 1998 13:15:46 -0600

68 lines

<No subject>

Mcmaster, Michael <[log in to unmask]>

Wed, 4 Nov 1998 12:10:05 -0800

62 lines

<No subject>

Lepsche, Thomas (NM75) <[log in to unmask]>

Wed, 4 Nov 1998 17:12:38 -0700

20 lines

<No subject>

Lepsche, Thomas (NM75) <[log in to unmask]>

Wed, 4 Nov 1998 17:13:22 -0700

20 lines

<No subject>

Lepsche, Thomas (NM75) <[log in to unmask]>

Wed, 4 Nov 1998 17:14:13 -0700

20 lines

<No subject>

Lepsche, Thomas (NM75) <[log in to unmask]>

Wed, 4 Nov 1998 17:14:45 -0700

20 lines

<No subject>

Bill Davis <[log in to unmask]>

Wed, 4 Nov 1998 17:11:43 -0800

122 lines

<No subject>

[log in to unmask]

Thu, 5 Nov 1998 14:40:04 -0500

159 lines

<No subject>

Jim Yohe <[log in to unmask]>

Mon, 9 Nov 1998 23:39:39 -0800

86 lines

<No subject>

Vinit Verma <[log in to unmask]>

Tue, 10 Nov 1998 13:43:04 -0500

31 lines

<No subject>

Robert Welch <[log in to unmask]>

Tue, 10 Nov 1998 18:07:33 -0500

18 lines

<No subject>

Jon Seubert <[log in to unmask]>

Thu, 12 Nov 1998 23:02:47 -0700

21 lines

<No subject>

Chemitalic A/S <[log in to unmask]>

Thu, 19 Nov 1998 09:06:56 +0100

30 lines

<No subject>

Dave Connitt <[log in to unmask]>

Tue, 24 Nov 1998 14:43:21 -0500

69 lines

<No subject>

Alderete, Michael <[log in to unmask]>

Tue, 24 Nov 1998 15:14:14 -0800

62 lines

New Thread

Accurately Positioning Components on PWBs

Accurately Positioning Components on PWBs

Eric Christison <[log in to unmask]>

Mon, 23 Nov 1998 12:01:39 GMT

44 lines

Re: Accurately Positioning Components on PWBs

Cash, Alan <[log in to unmask]>

Mon, 23 Nov 1998 10:42:18 -0500

70 lines

New Thread

Alpha wire FIT-130 product line.

Alpha wire FIT-130 product line.

Chris_Smith <[log in to unmask]>

Tue, 3 Nov 1998 12:48:41 -0600

36 lines

New Thread

Annular Ring !

Annular Ring !

ntcb <[log in to unmask]>

Fri, 6 Nov 1998 12:52:05 -0600

57 lines

Re: Annular Ring !

Tom Hybiske <[log in to unmask]>

Fri, 6 Nov 1998 15:11:38 +0000

39 lines

Re: Annular Ring !

Andy Cameron <[log in to unmask]>

Fri, 6 Nov 1998 20:18:09 EST

31 lines

Re: Annular Ring !

Andy Cameron <[log in to unmask]>

Sat, 7 Nov 1998 10:44:21 EST

33 lines

New Thread

Annular Ring!- May we have an arbiter please...Paging Mr. ...

Re: Annular Ring!- May we have an arbiter please...Paging Mr. ...

[log in to unmask]

Mon, 9 Nov 1998 11:58:34 EST

42 lines

Re: Annular Ring!- May we have an arbiter please...Paging Mr. ...

Seth Goodman <[log in to unmask]>

Thu, 19 Nov 1998 15:15:23 -0600

85 lines

New Thread

Annular Ring!- May we have an arbiter please...Paging Mr. Coyle!

Annular Ring!- May we have an arbiter please...Paging Mr. Coyle!

Tom H <[log in to unmask]>

Sun, 8 Nov 1998 00:18:29 -0500

42 lines

New Thread

Assembly : temp. profile for glue cure

Assembly : temp. profile for glue cure

amith k <[log in to unmask]>

Mon, 23 Nov 1998 02:42:54 PST

36 lines

New Thread

Assembly: temp. profile for glue cure

Re: Assembly: temp. profile for glue cure

Stephen R. Gregory <[log in to unmask]>

Mon, 23 Nov 1998 13:54:39 EST

45 lines

New Thread

ASSY : Wavesoldering : Dross formation

ASSY : Wavesoldering : Dross formation

amith k <[log in to unmask]>

Tue, 3 Nov 1998 20:04:41 PST

39 lines

Re: ASSY : Wavesoldering : Dross formation

Tumibay, Aleli <[log in to unmask]>

Wed, 4 Nov 1998 01:13:39 -0500

56 lines

Re: ASSY : Wavesoldering : Dross formation

Kenny Bloomquist <[log in to unmask]>

Wed, 4 Nov 1998 06:31:50 -0800

68 lines

ASSY : Wavesoldering : Dross formation

[log in to unmask]

Tue, 17 Nov 1998 13:42:27 -0600

42 lines

New Thread

Assy: Contact CS-400E Efficiency

Assy: Contact CS-400E Efficiency

Stephen R. Gregory <[log in to unmask]>

Tue, 24 Nov 1998 11:54:33 EST

63 lines

Assy: Contact CS-400E Efficiency

Collins, Graham <[log in to unmask]>

Tue, 24 Nov 1998 13:27:39 -0400

130 lines

Re: Assy: Contact CS-400E Efficiency

Joshua Forrester <[log in to unmask]>

Tue, 24 Nov 1998 11:46:09 -0600

113 lines

Re: Assy: Contact CS-400E Efficiency

Gary Camac <[log in to unmask]>

Tue, 24 Nov 1998 14:43:39 -0600

95 lines

New Thread

Assy: Low quantity Press-fit connector tip...

Assy: Low quantity Press-fit connector tip...

Stephen R. Gregory <[log in to unmask]>

Sun, 1 Nov 1998 14:22:02 EST

60 lines

Re: Assy: Low quantity Press-fit connector tip...

Bev Christian <[log in to unmask]>

Sun, 1 Nov 1998 21:40:55 -0500

106 lines

Re: Assy: Low quantity Press-fit connector tip...

Gabe Cherian <[log in to unmask]>

Sun, 1 Nov 1998 21:11:33 -0800

78 lines

Re: Assy: Low quantity Press-fit connector tip...

Stephen R. Gregory <[log in to unmask]>

Mon, 2 Nov 1998 08:49:45 EST

71 lines

New Thread

ASSY: Modified ETFE Insulation

ASSY: Modified ETFE Insulation

Jan Satterfield <[log in to unmask]>

Mon, 16 Nov 1998 15:20:39 -0700

25 lines

New Thread

Assy: QFP leadframe tin-lead finish

Assy: QFP leadframe tin-lead finish

Jerry Cupples <[log in to unmask]>

Wed, 11 Nov 1998 17:36:59 -0600

40 lines

Re: Assy: QFP leadframe tin-lead finish

Sauer, Steven T. <[log in to unmask]>

Thu, 12 Nov 1998 07:33:00 E

35 lines

Re: Assy: QFP leadframe tin-lead finish

David D Hillman <[log in to unmask]>

Thu, 12 Nov 1998 07:06:43 -0600

86 lines

Re: Assy: QFP leadframe tin-lead finish

Bill Davis <[log in to unmask]>

Thu, 12 Nov 1998 10:09:12 -0800

74 lines

Re: Assy: QFP leadframe tin-lead finish

Jerry Cupples <[log in to unmask]>

Thu, 12 Nov 1998 15:22:22 -0600

74 lines

Re: Assy: QFP leadframe tin-lead finish

Russ Winslow <[log in to unmask]>

Thu, 12 Nov 1998 12:39:09 -0800

42 lines

Re: Assy: QFP leadframe tin-lead finish

McMonagle, Michael R. <[log in to unmask]>

Thu, 12 Nov 1998 16:38:48 -0600

92 lines

Re: Assy: QFP leadframe tin-lead finish

Kelly M. Schriver <[log in to unmask]>

Thu, 12 Nov 1998 10:17:53 -0600

42 lines

Re: Assy: QFP leadframe tin-lead finish

<Mary Smoot> <[log in to unmask]>

Fri, 13 Nov 1998 14:52:08 -0500

140 lines

Re: Assy: QFP leadframe tin-lead finish

Russ Winslow <[log in to unmask]>

Fri, 13 Nov 1998 15:10:53 -0800

89 lines

New Thread

Assy: Solder-ball FAQ

Assy: Solder-ball FAQ

Jerry Cupples <[log in to unmask]>

Tue, 10 Nov 1998 15:32:24 -0600

62 lines

New Thread

Assy: stencil cleaning liquid temps

Assy: stencil cleaning liquid temps

Jeff Hempton <[log in to unmask]>

Fri, 6 Nov 1998 09:39:10 -0500

43 lines

Re: Assy: stencil cleaning liquid temps

Jeff Hempton <[log in to unmask]>

Mon, 9 Nov 1998 07:42:13 -0500

76 lines

New Thread

assy: tin at $2.48/lb

assy: tin at $2.48/lb

Jerry Cupples <[log in to unmask]>

Mon, 23 Nov 1998 13:46:03 -0600

46 lines

New Thread

assy: wave solder fingers

assy: wave solder fingers

Jerry Cupples <[log in to unmask]>

Tue, 24 Nov 1998 10:15:19 -0600

36 lines

Re: assy: wave solder fingers

Vanderhoof, Brad <[log in to unmask]>

Tue, 24 Nov 1998 09:53:39 -0800

67 lines

New Thread

ASSY:mixing of high and low-temp PbSn alloys

ASSY:mixing of high and low-temp PbSn alloys

Alderete, Michael <[log in to unmask]>

Wed, 25 Nov 1998 14:55:05 -0800

37 lines

New Thread

Attaching Al heatsink to Si die

Attaching Al heatsink to Si die

John Loveluck <[log in to unmask]>

Tue, 17 Nov 1998 10:53:12 -0600

33 lines

Re: Attaching Al heatsink to Si die

Werner Engelmaier <[log in to unmask]>

Tue, 17 Nov 1998 18:30:28 EST

44 lines

Re: Attaching Al heatsink to Si die

[log in to unmask]

Thu, 19 Nov 1998 08:26:15 +0100

87 lines

Re: Attaching Al heatsink to Si die

John Loveluck <[log in to unmask]>

Thu, 19 Nov 1998 04:25:34 -0600

83 lines

Re: Attaching Al heatsink to Si die

Werner Engelmaier <[log in to unmask]>

Thu, 19 Nov 1998 09:55:46 EST

72 lines

Re: Attaching Al heatsink to Si die

Jean-Paul Clech <[log in to unmask]>

Thu, 19 Nov 1998 15:35:03 EST

71 lines

Re: Attaching Al heatsink to Si die

Bill Davis <[log in to unmask]>

Mon, 23 Nov 1998 08:52:45 -0800

142 lines

New Thread

auto dosing systems

auto dosing systems

Dave Nemer <[log in to unmask]>

Mon, 23 Nov 1998 18:57:01 -0800

39 lines

Re: auto dosing systems

Dave Nemer <[log in to unmask]>

Tue, 24 Nov 1998 06:56:39 -0800

60 lines

New Thread

Auto Insertion of Triacs

Auto Insertion of Triacs

Hamilton, Richard -4454 <[log in to unmask]>

Fri, 6 Nov 1998 13:04:16 -0700

38 lines

New Thread

AVX Multiguard and Current Leakage Issues

AVX Multiguard and Current Leakage Issues

Eldon Sanders <[log in to unmask]>

Wed, 11 Nov 1998 12:54:01 -0800

35 lines

New Thread

AW: [TN] Electroless Nickel for Aluminum

AW: [TN] Electroless Nickel for Aluminum

Nüchter Wolfgang (FV/FLT) * <[log in to unmask]>

Tue, 17 Nov 1998 16:07:14 +0100

36 lines

Re: AW: [TN] Electroless Nickel for Aluminum

No Name Available <[log in to unmask]>

Tue, 17 Nov 1998 10:09:07 -0500

69 lines

New Thread

Backfill Recommendation

Backfill Recommendation

glenn pelkey <[log in to unmask]>

Thu, 5 Nov 1998 09:51:13 PST

44 lines

Re: Backfill Recommendation

Jim Gleason <[log in to unmask]>

Thu, 5 Nov 1998 16:22:00 -0600

70 lines

New Thread

Bare Board imperfections

Bare Board imperfections

Connie Korth <[log in to unmask]>

Thu, 5 Nov 1998 09:41:51 CST

38 lines

Re: Bare Board imperfections

Jim Axton <[log in to unmask]>

Thu, 5 Nov 1998 07:59:27 -0800

68 lines

Re: Bare Board imperfections

[log in to unmask]

Thu, 5 Nov 1998 13:13:53 EST

29 lines

Re: Bare Board imperfections

Ed Cosper <[log in to unmask]>

Fri, 6 Nov 1998 04:06:35 -0600

161 lines

Re: Bare Board imperfections

Eltek Ltd. - Process Engineering <[log in to unmask]>

Sun, 8 Nov 1998 10:08:15 +0200

75 lines

New Thread

Bare Board imperfections -Reply

Re: Bare Board imperfections -Reply

Glenn Britton <[log in to unmask]>

Thu, 5 Nov 1998 10:36:57 -0800

26 lines

New Thread

Bare Die Supplier

Bare Die Supplier

Lim Yak Peng <[log in to unmask]>

Wed, 4 Nov 1998 11:18:49 +0800

30 lines

New Thread

Bareboard imperfections

Bareboard imperfections

Connie Korth <[log in to unmask]>

Mon, 9 Nov 1998 08:27:18 CST

33 lines

New Thread

Bend/flex

Bend/flex

Gadoua,Pierre <[log in to unmask]>

Thu, 26 Nov 1998 11:50:00 -0500

34 lines

Re: Bend/flex

Werner Engelmaier <[log in to unmask]>

Fri, 27 Nov 1998 07:14:05 EST

35 lines

Re: Bend/flex

Jerome Sallo <[log in to unmask]>

Fri, 27 Nov 1998 19:47:14 EST

28 lines

Bend/flex

Andy Magee <[log in to unmask]>

Sat, 28 Nov 1998 10:56:28 -0500

56 lines

New Thread

BGA rework question

Re: BGA rework question

Chan, Marcelo <[log in to unmask]>

Mon, 2 Nov 1998 07:37:41 -0500

77 lines

Re: BGA rework question

Rick Thompson <[log in to unmask]>

Mon, 2 Nov 1998 08:20:08 -0800

85 lines

Re: BGA rework question

Thomas C Han <[log in to unmask]>

Mon, 2 Nov 1998 11:38:08 -0800

86 lines

New Thread

BGA Shelf Life

BGA Shelf Life

DUCIE NEVILLE <[log in to unmask]>

Thu, 26 Nov 1998 14:31:41 -0000

27 lines

New Thread

BGA X-ray

BGA X-ray

[log in to unmask]

Tue, 24 Nov 1998 13:01:15 -0600

27 lines

New Thread

BGA X-ray inspection

BGA X-ray inspection

[log in to unmask]

Wed, 25 Nov 1998 12:39:10 -0600

33 lines

New Thread

Blind vias

Blind vias

Scott Stewart <[log in to unmask]>

Fri, 20 Nov 1998 18:06:12 -0500

30 lines

New Thread

Board Assembly Quoting

Board Assembly Quoting

Thibodeau, Chad <[log in to unmask]>

Wed, 4 Nov 1998 13:00:23 -0700

32 lines

New Thread

card edge connectors

card edge connectors

Lustig, Steven K.. <[log in to unmask]>

Thu, 12 Nov 1998 15:43:27 -0500

38 lines

New Thread

CEM 1 vs G10

CEM 1 vs G10

Curtis, John <[log in to unmask]>

Fri, 13 Nov 1998 17:50:19 -0500

38 lines

Re: CEM 1 vs G10

Don Vischulis <[log in to unmask]>

Sat, 14 Nov 1998 12:45:20 -0600

51 lines

Re: CEM 1 vs G10

Hiteshew, Michael <[log in to unmask]>

Mon, 16 Nov 1998 09:25:53 -0500

57 lines

New Thread

Chemring

Chemring

[log in to unmask]

Thu, 5 Nov 1998 20:13:28 EST

27 lines

Chemring

[log in to unmask]

Thu, 5 Nov 1998 21:22:50 EST

23 lines

Re: Chemring

Nelson, John <[log in to unmask]>

Fri, 6 Nov 1998 08:06:53 -0500

54 lines

New Thread

Cleaning Solder Pallets

Cleaning Solder Pallets

No Name Available <[log in to unmask]>

Thu, 5 Nov 1998 20:21:23 EST

29 lines

Re: Cleaning Solder Pallets

Russ Winslow <[log in to unmask]>

Thu, 5 Nov 1998 18:40:52 -0800

57 lines

New Thread

Cleaning Un-cured SMA

Cleaning Un-cured SMA

Barry Ritchie <[log in to unmask]>

Thu, 19 Nov 1998 08:15:47 -0500

37 lines

New Thread

COG mounting techniques

COG mounting techniques

Edwin Maximo <[log in to unmask]>

Wed, 4 Nov 1998 09:41:36 +0000

43 lines

New Thread

company address

company address

Saverio Alberti <[log in to unmask]>

Wed, 11 Nov 1998 10:41:49 +0100

26 lines

Re: company address

Thomas DeSmit <[log in to unmask]>

Wed, 11 Nov 1998 07:29:07 -0600

87 lines

Re: company address

Ahne Oosterhof <[log in to unmask]>

Wed, 11 Nov 1998 11:32:59 -0800

42 lines

New Thread

Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts

Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts

[log in to unmask]

Tue, 17 Nov 1998 15:41:46 -0600

33 lines

Re: Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts

Richard Haynes <[log in to unmask]>

Tue, 17 Nov 1998 17:40:22 -0500

73 lines

New Thread

Conformal Coating Needed??

Conformal Coating Needed??

[log in to unmask]

Tue, 17 Nov 1998 13:22:38 -0600

34 lines

Re: Conformal Coating Needed??

[log in to unmask]

Tue, 17 Nov 1998 15:31:26 -0500

96 lines

New Thread

Conformal Coatings

Conformal Coatings

Ryan Jennens <[log in to unmask]>

Thu, 5 Nov 1998 14:40:37 -0500

31 lines

Re: Conformal Coatings

Richard Haynes <[log in to unmask]>

Mon, 9 Nov 1998 12:47:00 -0500

153 lines

New Thread

conformal coating[SHEEN CUP 401/4 specification]

conformal coating[SHEEN CUP 401/4 specification]

ajay agarwal <[log in to unmask]>

Wed, 18 Nov 1998 16:41:17 PST

34 lines

Re: conformal coating[SHEEN CUP 401/4 specification]

Larry Crane <[log in to unmask]>

Thu, 19 Nov 1998 07:18:31 -0500

69 lines

Re: conformal coating[SHEEN CUP 401/4 specification]

Graham Naisbitt <[log in to unmask]>

Thu, 19 Nov 1998 13:22:07 -0000

100 lines

New Thread

Copper Plating

Re: Copper Plating

Eric Yakobson <[log in to unmask]>

Wed, 11 Nov 1998 12:11:36 -0500

96 lines

Copper Plating

[log in to unmask]

Wed, 11 Nov 1998 15:03:20 EST

833 lines

Copper Plating

[log in to unmask]

Wed, 11 Nov 1998 15:45:49 EST

54 lines

copper plating

[log in to unmask]

Wed, 11 Nov 1998 20:03:20 EST

33 lines

copper plating

mcarano <[log in to unmask]>

Sun, 15 Nov 1998 13:25:34 -0600

75 lines

Copper Plating

Werner Engelmaier <[log in to unmask]>

Wed, 18 Nov 1998 19:37:21 EST

24 lines

Re: Copper Plating

Roger Mouton <[log in to unmask]>

Thu, 19 Nov 1998 22:03:05 EST

39 lines

New Thread

Copper plating & Copper thickness

Re: Copper plating & Copper thickness

mcarano <[log in to unmask]>

Sun, 1 Nov 1998 09:41:26 -0600

199 lines

Re: Copper plating & Copper thickness

Richard Haynes <[log in to unmask]>

Sat, 31 Oct 1998 21:57:19 -0500

75 lines

Re: Copper plating & Copper thickness

Richard Haynes <[log in to unmask]>

Sun, 1 Nov 1998 17:49:49 -0500

84 lines

Re: Copper plating & Copper thickness

Werner Engelmaier <[log in to unmask]>

Mon, 2 Nov 1998 20:50:59 EST

57 lines

Re: Copper plating & Copper thickness

Richard Haynes <[log in to unmask]>

Wed, 4 Nov 1998 16:37:31 -0500

77 lines

Re: Copper plating & Copper thickness

Eric Yakobson <[log in to unmask]>

Mon, 9 Nov 1998 14:41:29 -0500

234 lines

Re: Copper plating & Copper thickness

Roger Mouton <[log in to unmask]>

Tue, 10 Nov 1998 13:07:58 EST

32 lines

Re: Copper plating & Copper thickness

Leslie O. Connally <[log in to unmask]>

Wed, 11 Nov 1998 08:39:17 -0600

56 lines

Re: Copper plating & Copper thickness

mcarano <[log in to unmask]>

Wed, 11 Nov 1998 23:10:29 -0600

271 lines

New Thread

copper plating and anode area

copper plating and anode area

mcarano <[log in to unmask]>

Sun, 15 Nov 1998 13:27:05 -0600

102 lines

New Thread

Copper plating Anode ratio

Copper plating Anode ratio

Francis Lai <[log in to unmask]>

Sat, 14 Nov 1998 14:45:01 -0500

53 lines

Re: Copper plating Anode ratio

mcarano <[log in to unmask]>

Sat, 14 Nov 1998 22:37:51 -0600

104 lines

New Thread

Corrrection Annular Ring !

Re: Corrrection Annular Ring !

Andy Cameron <[log in to unmask]>

Sat, 7 Nov 1998 11:07:26 EST

33 lines

New Thread

Counter Sunk Screws to mount PCBs

Counter Sunk Screws to mount PCBs

Greg Kaskey <[log in to unmask]>

Tue, 17 Nov 1998 10:23:22 -0500

34 lines

Re: Counter Sunk Screws to mount PCBs

Hiteshew, Michael <[log in to unmask]>

Tue, 17 Nov 1998 10:54:23 -0500

52 lines

Re: Counter Sunk Screws to mount PCBs

Kenny Bloomquist <[log in to unmask]>

Tue, 17 Nov 1998 07:57:38 -0800

47 lines

New Thread

Covering Vias

Covering Vias

Ryan Jennens <[log in to unmask]>

Mon, 23 Nov 1998 13:01:53 -0500

37 lines

Re: Covering Vias

Seth Goodman <[log in to unmask]>

Tue, 24 Nov 1998 11:56:22 -0600

80 lines

New Thread

Daisy chain

Daisy chain

Edwin Maximo <[log in to unmask]>

Mon, 9 Nov 1998 11:19:23 +0000

33 lines

Re: Daisy chain

Zoran Raich <[log in to unmask]>

Mon, 9 Nov 1998 18:51:17 +1100

68 lines

Re: Daisy chain

Paul Klasek <[log in to unmask]>

Wed, 11 Nov 1998 11:36:06 +1100

102 lines

New Thread

DEK GSX265 PROFLOW HEAD UPDATE

DEK GSX265 PROFLOW HEAD UPDATE

Kathy Palumbo <[log in to unmask]>

Wed, 18 Nov 1998 07:27:39 -0800

190 lines

New Thread

DES: Pressfit Connectors & White Tin

DES: Pressfit Connectors & White Tin

Steve Collins <[log in to unmask]>

Wed, 18 Nov 1998 14:55:06 -0700

31 lines

Re: DES: Pressfit Connectors & White Tin

Rich Edgar <[log in to unmask]>

Thu, 19 Nov 1998 15:09:21 EST

33 lines

New Thread

dewetting

dewetting

[log in to unmask]

Tue, 3 Nov 1998 08:30:31 -0800

30 lines

New Thread

DFM for SMT Spec.

DFM for SMT Spec.

John Mastorides <[log in to unmask]>

Thu, 12 Nov 1998 13:24:44 -0500

27 lines

Re: DFM for SMT Spec.

Morton, John <[log in to unmask]>

Thu, 12 Nov 1998 14:09:16 -0500

63 lines

New Thread

Direct Bond Copper

Direct Bond Copper

WM Cheng <[log in to unmask]>

Wed, 4 Nov 1998 18:09:39 EST

25 lines

New Thread

Electroless Nickel for Aluminum

Electroless Nickel for Aluminum

Mike Owens <[log in to unmask]>

Mon, 16 Nov 1998 12:30:24 -0600

47 lines

New Thread

electroless pth

electroless pth

Jac Kroeker <[log in to unmask]>

Mon, 2 Nov 1998 13:43:50 -0800

31 lines

Re: electroless pth

Gerard O'Brien <[log in to unmask]>

Wed, 4 Nov 1998 12:36:19 -0500

61 lines

New Thread

Electroplating and Surface Finishing Society National Convention

Re: Electroplating and Surface Finishing Society National Convention

Richard Haynes <[log in to unmask]>

Fri, 6 Nov 1998 19:15:15 -0500

395 lines

New Thread

ENC: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

ENC: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

No Name Available <[log in to unmask]>

Fri, 20 Nov 1998 14:00:23 -0200

283 lines

New Thread

Epoxy Stencil Design?

Epoxy Stencil Design?

Rick Thompson <[log in to unmask]>

Wed, 4 Nov 1998 10:29:22 -0800

40 lines

Re: Epoxy Stencil Design?

Gary Camac <[log in to unmask]>

Thu, 5 Nov 1998 06:14:54 -0600

58 lines

Re: Epoxy Stencil Design?

Stephen R. Gregory <[log in to unmask]>

Thu, 5 Nov 1998 10:57:18 EST

78 lines

New Thread

Epoxy Stencil Design? -Reply

Epoxy Stencil Design? -Reply

Matthew Park <[log in to unmask]>

Wed, 4 Nov 1998 14:19:44 -0800

72 lines

New Thread

FAB: Cupric Chloride etching

FAB: Cupric Chloride etching

[log in to unmask]

Fri, 6 Nov 1998 00:33:49 EST

30 lines

Re: FAB: Cupric Chloride etching

Leslie O. Connally <[log in to unmask]>

Fri, 6 Nov 1998 08:25:16 -0500

73 lines

Re: FAB: Cupric Chloride etching

Ted Stern <[log in to unmask]>

Fri, 6 Nov 1998 11:05:29 -0800

55 lines

FAB: Cupric Chloride etching

Timothy A. Estes <[log in to unmask]>

Fri, 6 Nov 1998 14:05:54 -0700

74 lines

Re: FAB: Cupric Chloride etching

Phil Culpovich <[log in to unmask]>

Sat, 7 Nov 1998 09:29:15 -0800

77 lines

Re: FAB: Cupric Chloride etching

<Rudy Sedlak> <[log in to unmask]>

Sun, 8 Nov 1998 09:51:14 EST

36 lines

Re: FAB: Cupric Chloride etching

Leslie O. Connally <[log in to unmask]>

Mon, 9 Nov 1998 14:36:39 -0600

65 lines

New Thread

Failure of Rigid Flex

Re: Failure of Rigid Flex

Paul Terranova <[log in to unmask]>

Mon, 2 Nov 1998 09:41:54 -0500

102 lines

New Thread

Finding the man who helped me !(+/-3mill)

Finding the man who helped me !(+/-3mill)

[log in to unmask]

Wed, 25 Nov 1998 13:30:23 +0900

39 lines

New Thread

FINE LINE COPPER PLATING

FINE LINE COPPER PLATING

Huffman, Connie - LYPME <[log in to unmask]>

Thu, 12 Nov 1998 12:30:30 -0500

28 lines

Re: FINE LINE COPPER PLATING

Richard Haynes <[log in to unmask]>

Thu, 12 Nov 1998 14:49:53 -0500

61 lines

Re: FINE LINE COPPER PLATING

[log in to unmask]

Thu, 12 Nov 1998 22:40:40 EST

27 lines

Re: FINE LINE COPPER PLATING

Eric Yakobson <[log in to unmask]>

Fri, 13 Nov 1998 13:46:06 -0500

96 lines

Re: FINE LINE COPPER PLATING

mcarano <[log in to unmask]>

Sat, 14 Nov 1998 12:50:01 -0600

62 lines

Re: FINE LINE COPPER PLATING

mcarano <[log in to unmask]>

Sat, 14 Nov 1998 22:29:00 -0600

131 lines

Fine line copper plating

mcarano <[log in to unmask]>

Sun, 15 Nov 1998 13:29:21 -0600

81 lines

Re: FINE LINE COPPER PLATING

Eric Yakobson <[log in to unmask]>

Mon, 16 Nov 1998 14:03:45 -0500

185 lines

New Thread

Fine pitch

Fine pitch

No Name Available <[log in to unmask]>

Mon, 2 Nov 1998 19:51:16 EST

28 lines

New Thread

Fine Pitch info

Fine Pitch info

No Name Available <[log in to unmask]>

Sun, 1 Nov 1998 11:04:01 EST

34 lines

Re: Fine Pitch info

Paul Gould <[log in to unmask]>

Mon, 2 Nov 1998 11:54:45 -0000

67 lines

New Thread

fixing exposed copper/traces

fixing exposed copper/traces

Bryan Bloom <[log in to unmask]>

Tue, 10 Nov 1998 08:54:22 -0800

31 lines

Re: fixing exposed copper/traces

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Nov 1998 12:53:01 EST

39 lines

Re: fixing exposed copper/traces

Bruce Adams <[log in to unmask]>

Wed, 11 Nov 1998 04:41:13 -0800

64 lines

New Thread

Flex to FR4 with hot bar

Flex to FR4 with hot bar

Rose, Daniel B <[log in to unmask]>

Wed, 4 Nov 1998 09:33:22 -0700

26 lines

New Thread

Flexible Circuits

Flexible Circuits

Bock Ming Gai Joanne <[log in to unmask]>

Mon, 2 Nov 1998 11:48:50 +0800

32 lines

Re: Flexible Circuits

Jay Bitanga <[log in to unmask]>

Wed, 4 Nov 1998 10:52:33 +0000

48 lines

Re: Flexible Circuits

Fujikura Ltd. <[log in to unmask]>

Wed, 4 Nov 1998 10:59:16 +0900

65 lines

New Thread

Flexible Conformal Coating

Flexible Conformal Coating

Barry Ritchie <[log in to unmask]>

Thu, 19 Nov 1998 08:33:06 -0500

35 lines

New Thread

Flying Grid Bare Board Testers

Flying Grid Bare Board Testers

Test Engineering <[log in to unmask]>

Wed, 4 Nov 1998 07:16:05 -0500

30 lines

New Thread

FOR YOUR HELP

FOR YOUR HELP

HUCKL CHANG, P.E./SHA 086-520-7314449.EXT.30156 <[log in to unmask]>

Thu, 5 Nov 1998 13:41:56 +0800

52 lines

Re: FOR YOUR HELP

DeLorenzo, Stacey <[log in to unmask]>

Thu, 5 Nov 1998 08:59:00 -0500

132 lines

Re: FOR YOUR HELP

McMonagle, Michael R. <[log in to unmask]>

Mon, 9 Nov 1998 08:19:17 -0600

108 lines

New Thread

FR4 properties

FR4 properties

Kady, Kevin P <[log in to unmask]>

Mon, 30 Nov 1998 11:37:12 -0600

24 lines

Re: FR4 properties

Bill Davis <[log in to unmask]>

Mon, 30 Nov 1998 12:08:11 -0800

103 lines

Re: FR4 properties

Werner Engelmaier <[log in to unmask]>

Mon, 30 Nov 1998 19:22:29 EST

39 lines

New Thread

Fume Extraction for Manual Soldering

Fume Extraction for Manual Soldering

Cam Rankin <[log in to unmask]>

Thu, 19 Nov 1998 18:59:33 -0500

33 lines

Re: Fume Extraction for Manual Soldering

Dan Foster <[log in to unmask]>

Fri, 20 Nov 1998 13:07:21 -0500

82 lines

New Thread

FW: [TN] Moisture Sensitive Devices

FW: [TN] Moisture Sensitive Devices

Jeff Perkins <[log in to unmask]>

Mon, 16 Nov 1998 08:03:18 -0500

127 lines

New Thread

FW: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

FW: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

Rafael Delis <[log in to unmask]>

Fri, 20 Nov 1998 07:38:35 -0800

370 lines

Re: FW: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

Rafal Kozlowski <[log in to unmask]>

Fri, 20 Nov 1998 14:17:40 -0500

292 lines

New Thread

FW: [TN] Temp Profiling

FW: [TN] Temp Profiling

Jeff Perkins <[log in to unmask]>

Thu, 12 Nov 1998 12:45:24 -0500

79 lines

New Thread

FW: [TN] True Position and Registration on Fab

FW: [TN] True Position and Registration on Fab

Jeff Perkins <[log in to unmask]>

Thu, 19 Nov 1998 08:05:35 -0500

73 lines

New Thread

Fwd: [TN] Copper plating & Copper thickness

Fwd: [TN] Copper plating & Copper thickness

Roger Mouton <[log in to unmask]>

Wed, 11 Nov 1998 11:36:49 EST

66 lines

New Thread

Fwd:Through hole vs SMT

Fwd:Through hole vs SMT

[log in to unmask]

Tue, 17 Nov 1998 14:20:20 -0600

41 lines

New Thread

GenCAM

GenCAM

Steve Collins <[log in to unmask]>

Tue, 10 Nov 1998 11:55:57 -0700

27 lines

New Thread

Gold Finger Stains

Gold Finger Stains

Joy, Stephen C <[log in to unmask]>

Thu, 19 Nov 1998 10:38:00 -0800

30 lines

Re: Gold Finger Stains

David Jandzinski <[log in to unmask]>

Thu, 19 Nov 1998 14:56:08 -0700

173 lines

Re: Gold Finger Stains

Russell Spivey <[log in to unmask]>

Fri, 20 Nov 1998 09:31:02 -0000

68 lines

Re: Gold Finger Stains

David Jandzinski <[log in to unmask]>

Fri, 20 Nov 1998 08:00:15 -0700

205 lines

New Thread

Gold Finger Stains & Contact Resistance.

Gold Finger Stains & Contact Resistance.

WILLIAM G KENYON 302-652-4272 <[log in to unmask]>

Fri, 20 Nov 1998 23:26:00 -0500

50 lines

New Thread

Gold mask etchant

Gold mask etchant

Andi Petculescu <[log in to unmask]>

Wed, 25 Nov 1998 11:36:30 -0500

25 lines

Re: Gold mask etchant

Alex Neussendorfer <[log in to unmask]>

Wed, 25 Nov 1998 11:27:44 -0600

59 lines

Re: Gold mask etchant

Smith Russell MSM LAPO US <[log in to unmask]>

Mon, 30 Nov 1998 20:49:00 +0100

103 lines

New Thread

HASL

HASL

Afri Singh <[log in to unmask]>

Tue, 24 Nov 1998 23:27:42 -0500

26 lines

HASL

[log in to unmask]

Wed, 25 Nov 1998 09:46:33 -0600

37 lines

Re: HASL

George Toman <[log in to unmask]>

Wed, 25 Nov 1998 11:42:46 -0500

65 lines

Re: HASL

Afri Singh <[log in to unmask]>

Wed, 25 Nov 1998 15:58:17 -0500

69 lines

Re: HASL

Werner Engelmaier <[log in to unmask]>

Wed, 25 Nov 1998 20:23:27 EST

35 lines

HASL

[log in to unmask]

Fri, 27 Nov 1998 11:31:40 -0600

27 lines

HASL

[log in to unmask]

Fri, 27 Nov 1998 14:02:08 -0600

28 lines

Re: HASL

Asbell <[log in to unmask]>

Sat, 27 Nov 2004 07:09:55 -0600

52 lines

HASL

[log in to unmask]

Sat, 28 Nov 1998 08:22:11 -0600

95 lines

Re: HASL

Paul Gould <[log in to unmask]>

Sun, 29 Nov 1998 11:08:11 -0000

62 lines

HASL

[log in to unmask]

Sun, 29 Nov 1998 16:48:05 -0600

41 lines

Re: HASL

Lenny Kurup <[log in to unmask]>

Mon, 30 Nov 1998 12:00:08 -0500

127 lines

New Thread

Heat Sinks on PWBs

Heat Sinks on PWBs

Hiteshew, Michael <[log in to unmask]>

Thu, 19 Nov 1998 16:40:15 -0500

42 lines

Re: Heat Sinks on PWBs

Barry Bates <[log in to unmask]>

Fri, 20 Nov 1998 09:28:16 -0000

94 lines

Heat Sinks on PWBs

[log in to unmask]

Fri, 27 Nov 1998 14:32:18 -0600

61 lines

New Thread

Heated ET

Heated ET

Matthew Sanders <[log in to unmask]>

Tue, 3 Nov 1998 10:52:49 -0800

50 lines

Re: Heated ET

Eltek Ltd. - Process Engineering <[log in to unmask]>

Wed, 4 Nov 1998 07:29:38 +0200

85 lines

Re: Heated ET

Edwards, Ted A (AZ75) <[log in to unmask]>

Wed, 4 Nov 1998 07:31:33 -0700

89 lines

Re: Heated ET

Werner Engelmaier <[log in to unmask]>

Wed, 4 Nov 1998 21:35:52 EST

46 lines

Heated ET

[log in to unmask]

Tue, 17 Nov 1998 16:19:01 -0600

25 lines

New Thread

Helium leak rate measurements.

Helium leak rate measurements.

Myron Papiz <[log in to unmask]>

Thu, 12 Nov 1998 10:31:12 -0500

29 lines

New Thread

Help locating PCB drill bits

Help locating PCB drill bits

Russell Epstein <[log in to unmask]>

Thu, 12 Nov 1998 09:40:38 PST

42 lines

New Thread

Help needed on PBGA Wire Bonding

Help needed on PBGA Wire Bonding

91dhzp <[log in to unmask]>

Sat, 21 Nov 1998 00:09:01 +0800

124 lines

New Thread

help! -- how to meet the +/-3mil(0.076mm)routing tolerance

help! -- how to meet the +/-3mil(0.076mm)routing tolerance

[log in to unmask]

Fri, 20 Nov 1998 19:54:26 +0900

58 lines

New Thread

hole plug source

Re: hole plug source

<Jason M. Smith> <[log in to unmask]>

Tue, 3 Nov 1998 11:50:26 -0500

31 lines

Re: hole plug source

McMonagle, Michael R. <[log in to unmask]>

Tue, 3 Nov 1998 11:43:25 -0600

72 lines

Re: hole plug source

Sauer, Steven T. <[log in to unmask]>

Tue, 3 Nov 1998 12:59:00 E

30 lines

Re: hole plug source

Paul Klasek <[log in to unmask]>

Wed, 4 Nov 1998 10:14:33 +1100

75 lines

New Thread

Hot Bar Production Methods

Hot Bar Production Methods

<Mary Smoot> <[log in to unmask]>

Thu, 19 Nov 1998 08:19:28 -0500

37 lines

Re: Hot Bar Production Methods

[log in to unmask]

Thu, 19 Nov 1998 11:27:37 -0600

78 lines

New Thread

IL Clearance Calculation

IL Clearance Calculation

jenny <[log in to unmask]>

Mon, 16 Nov 1998 10:44:24 +0800

31 lines

New Thread

Immersion Gold SMT PWB

Immersion Gold SMT PWB

Candeas, Barrie <[log in to unmask]>

Mon, 9 Nov 1998 10:45:09 -0500

31 lines

New Thread

Immesion Tin (The other White meat)

Immesion Tin (The other White meat)

[log in to unmask]

Mon, 9 Nov 1998 14:57:47 -0600

54 lines

Immesion Tin (The other White meat)

[log in to unmask]

Tue, 10 Nov 1998 09:52:25 -0600

57 lines

New Thread

Info on Nelco-6 laminate material

Info on Nelco-6 laminate material

Ken Patel <[log in to unmask]>

Mon, 23 Nov 1998 09:43:04 -0800

31 lines

Re: Info on Nelco-6 laminate material

KELLY M SCHRIVER <[log in to unmask]>

Tue, 24 Nov 1998 11:29:00 -0500

24 lines

New Thread

Inks used for Test Stamps on PCBs

Inks used for Test Stamps on PCBs

Test Engineering <[log in to unmask]>

Tue, 10 Nov 1998 09:59:40 -0500

32 lines

Re: Inks used for Test Stamps on PCBs

Paul Wilson <[log in to unmask]>

Wed, 11 Nov 1998 11:15:50 -0500

53 lines

New Thread

Intel uBGA Flash, Bottom Side SMT?

Re: Intel uBGA Flash, Bottom Side SMT?

Jim Gleason <[log in to unmask]>

Sat, 31 Oct 1998 07:02:10 -0600

76 lines

New Thread

Intermittent Dewetting

Intermittent Dewetting

Hugh Scott Miller <[log in to unmask]>

Mon, 2 Nov 1998 07:36:22 -0500

41 lines

Re: Intermittent Dewetting

Werner Engelmaier <[log in to unmask]>

Mon, 2 Nov 1998 20:51:02 EST

33 lines

New Thread

IPC 4101

IPC 4101

[log in to unmask]

Thu, 5 Nov 1998 14:15:28 -0500

46 lines

Re: IPC 4101

Mcmaster, Michael <[log in to unmask]>

Thu, 5 Nov 1998 15:48:39 -0800

95 lines

New Thread

IPC Designers Council Elections

IPC Designers Council Elections

Jim Yohe <[log in to unmask]>

Sun, 8 Nov 1998 12:35:24 -0800

92 lines

New Thread

IPC News Release: IPC Creates Equipment Exchange Website

IPC News Release: IPC Creates Equipment Exchange Website

Jack Crawford <[log in to unmask]>

Thu, 19 Nov 1998 13:19:15 -0600

128 lines

New Thread

IPC News Release: IPC/SMEMA Council to Intoduce new Trad...

Re: IPC News Release: IPC/SMEMA Council to Intoduce new Trad...

[log in to unmask]

Fri, 13 Nov 1998 05:44:18 EST

26 lines

New Thread

IPC News Release: IPC/SMEMA Council to Intoduce new Trade ...

Re: IPC News Release: IPC/SMEMA Council to Intoduce new Trade ...

Stephen R. Gregory <[log in to unmask]>

Thu, 12 Nov 1998 22:32:05 EST

29 lines

New Thread

IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show

IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show

David Bergman <[log in to unmask]>

Thu, 12 Nov 1998 14:50:19 -0600

88 lines

Re: IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show

David D Hillman <[log in to unmask]>

Thu, 12 Nov 1998 17:37:15 -0600

165 lines

New Thread

IPC News Release: IPC/SMEMA Council to Intoduce newTrade ...

Re: IPC News Release: IPC/SMEMA Council to Intoduce newTrade ...

Stephen R. Gregory <[log in to unmask]>

Fri, 13 Nov 1998 15:32:42 EST

62 lines

New Thread

Jay DeKing

Jay DeKing

Bill Stuhler <[log in to unmask]>

Fri, 13 Nov 1998 12:27:46 -0500

39 lines

New Thread

KODAK 960 FILM PROCESSOR

KODAK 960 FILM PROCESSOR

Modular Components National, Inc. <[log in to unmask]>

Wed, 25 Nov 1998 11:26:32 -0500

35 lines

New Thread

Laminate

Laminate

Ed Cosper <[log in to unmask]>

Mon, 16 Nov 1998 22:16:17 -0600

39 lines

Re: Laminate

James R. Paulus <[log in to unmask]>

Mon, 16 Nov 1998 14:37:31 EST

57 lines

New Thread

Layers Count vs Thickness

Layers Count vs Thickness

[log in to unmask]

Wed, 4 Nov 1998 14:08:27 -0600

98 lines

New Thread

Lead bending.

Lead bending.

Frank Hinojos <[log in to unmask]>

Mon, 2 Nov 1998 16:46:54 -0800

31 lines

Re: Lead bending.

Jeremy Drake <[log in to unmask]>

Tue, 3 Nov 1998 08:38:54 +0000

83 lines

New Thread

Lead-Free legislation

Lead-Free legislation

Oliver Kierse <[log in to unmask]>

Mon, 2 Nov 1998 16:31:53 GMT

42 lines

Re: Lead-Free legislation

Rob Horsley <[log in to unmask]>

Mon, 2 Nov 1998 17:03:22 +0000

28 lines

New Thread

life time of Ni/Au contacts?

life time of Ni/Au contacts?

Matthias Mansfeld <[log in to unmask]>

Wed, 11 Nov 1998 19:16:38 +0100

45 lines

Re: life time of Ni/Au contacts?

mark ross <[log in to unmask]>

Thu, 12 Nov 1998 11:39:45 -0500

72 lines

New Thread

Lines Between Pins

Lines Between Pins

Dr. Warren Smith <[log in to unmask]>

Tue, 1 Dec 1998 00:53:59 -0500

35 lines

New Thread

Logic Device, drop test failure

Logic Device, drop test failure

Bridget Piper <[log in to unmask]>

Tue, 10 Nov 1998 15:34:23 -0000

94 lines

Re: Logic Device, drop test failure

Eric Christison <[log in to unmask]>

Wed, 11 Nov 1998 15:47:41 GMT

67 lines

Re: Logic Device, drop test failure

Jim Marsico 516-595-5879 <[log in to unmask]>

Wed, 11 Nov 1998 11:25:00 -0500

30 lines

New Thread

Looking for dummy ceramic QFP parts

Looking for dummy ceramic QFP parts

Chan, Marcelo <[log in to unmask]>

Wed, 11 Nov 1998 13:48:03 -0500

30 lines

Re: Looking for dummy ceramic QFP parts

[log in to unmask]

Wed, 11 Nov 1998 14:23:02 -0600

43 lines

Re: Looking for dummy ceramic QFP parts

Sauer, Steven T. <[log in to unmask]>

Wed, 11 Nov 1998 15:06:00 E

26 lines

Re: Looking for dummy ceramic QFP parts

Cyker, Howard A (Howie) <[log in to unmask]>

Wed, 11 Nov 1998 14:55:37 -0500

100 lines

New Thread

Marking Pen

Marking Pen

Marco Biagtan <[log in to unmask]>

Mon, 30 Nov 1998 18:02:41 +0700

28 lines

New Thread

Marking systems

Marking systems

[log in to unmask]

Wed, 11 Nov 1998 10:37:40 -0600

39 lines

Re: Marking systems

McMonagle, Michael R. <[log in to unmask]>

Wed, 11 Nov 1998 12:46:09 -0600

75 lines

New Thread

mcm designers

mcm designers

Management Recruiters of St. Lawrence County <[log in to unmask]>

Mon, 9 Nov 1998 11:59:33 -0500

31 lines

New Thread

measuring Shear Force

measuring Shear Force

Scott Davies <[log in to unmask]>

Fri, 13 Nov 1998 09:07:16 -0500

27 lines

New Thread

Melting point of 90/10 and 95/5 solder

Melting point of 90/10 and 95/5 solder

Ken Patel <[log in to unmask]>

Wed, 25 Nov 1998 09:45:41 -0800

31 lines

Re: Melting point of 90/10 and 95/5 solder

[log in to unmask]

Wed, 25 Nov 1998 12:18:55 -0600

78 lines

Re: Melting point of 90/10 and 95/5 solder

KELLY M SCHRIVER <[log in to unmask]>

Wed, 25 Nov 1998 13:04:00 -0500

27 lines

Re: Melting point of 90/10 and 95/5 solder

Jerry Cupples <[log in to unmask]>

Wed, 25 Nov 1998 15:08:13 -0600

42 lines

Re: Melting point of 90/10 and 95/5 solder

Phillip E. Hinton <[log in to unmask]>

Wed, 25 Nov 1998 18:15:27 EST

32 lines

New Thread

Microscopes & Cross Sectioning equipment for HDIS

Microscopes & Cross Sectioning equipment for HDIS

Joe Dickson <[log in to unmask]>

Tue, 24 Nov 1998 10:11:32 PST

44 lines

Re: Microscopes & Cross Sectioning equipment for HDIS

Scott Stewart <[log in to unmask]>

Tue, 24 Nov 1998 18:06:35 -0500

61 lines

New Thread

MIL-1235 - Replaced ??

MIL-1235 - Replaced ??

[log in to unmask]

Mon, 2 Nov 1998 14:56:04 -0800

24 lines

Re: MIL-1235 - Replaced ??

Robert P. Pelletier <[log in to unmask]>

Tue, 3 Nov 1998 08:32:44 -0800

45 lines

New Thread

MIL-C-28809

MIL-C-28809

McGlaughlin, Jeffrey A <[log in to unmask]>

Mon, 2 Nov 1998 10:06:37 -0500

30 lines

Re: MIL-C-28809

Robert P. Pelletier <[log in to unmask]>

Mon, 2 Nov 1998 08:59:10 -0800

51 lines

Re: MIL-C-28809

Richard Haynes <[log in to unmask]>

Mon, 2 Nov 1998 15:08:49 -0500

59 lines

New Thread

modulus & Poisson's ratio

modulus & Poisson's ratio

Sheila Smith <[log in to unmask]>

Wed, 18 Nov 1998 10:55:34 -0500

27 lines

Re: modulus & Poisson's ratio

David Jandzinski <[log in to unmask]>

Wed, 18 Nov 1998 10:12:17 -0700

151 lines

New Thread

Moisture sensitive

Moisture sensitive

Edwin Maximo <[log in to unmask]>

Tue, 17 Nov 1998 08:40:50 +0000

39 lines

Re: Moisture sensitive

Russ Winslow <[log in to unmask]>

Tue, 17 Nov 1998 18:37:12 -0800

62 lines

New Thread

Moisture Sensitive Devices

Moisture Sensitive Devices

Yves Trudell <[log in to unmask]>

Fri, 13 Nov 1998 15:55:36 -0500

43 lines

Re: Moisture Sensitive Devices

Russ Winslow <[log in to unmask]>

Sat, 14 Nov 1998 12:57:11 -0800

94 lines

Re: Moisture Sensitive Devices

Bev Christian <[log in to unmask]>

Fri, 13 Nov 1998 17:29:58 -0500

95 lines

Re: Moisture Sensitive Devices

Bill Davis <[log in to unmask]>

Mon, 16 Nov 1998 08:18:02 -0800

106 lines

New Thread

mounting SOIC using Chipshooter

mounting SOIC using Chipshooter

Marc O. Bituagan <[log in to unmask]>

Tue, 3 Nov 1998 13:48:54 +0000

37 lines

mounting SOIC using Chipshooter

Jeff Hempton <[log in to unmask]>

Tue, 3 Nov 1998 07:55:40 -0500

69 lines

mounting SOIC using Chipshooter

Jeff Hempton <[log in to unmask]>

Tue, 3 Nov 1998 08:06:13 -0500

80 lines

New Thread

neckdown

neckdown

Tenison Stone <[log in to unmask]>

Thu, 12 Nov 1998 15:17:18 -0600

33 lines

Re: neckdown

Wolfe, Robert <[log in to unmask]>

Thu, 12 Nov 1998 17:30:07 -0500

67 lines

Re: neckdown

Khaled H. Fouad <[log in to unmask]>

Fri, 13 Nov 1998 01:35:28 +0200

56 lines

Re: neckdown

Wolfe, Robert <[log in to unmask]>

Mon, 16 Nov 1998 11:46:04 -0500

97 lines

New Thread

Need a Number - Solder Station One

Need a Number - Solder Station One

[log in to unmask]

Tue, 10 Nov 1998 16:33:35 -0600

24 lines

Re: Need a Number - Solder Station One

Jerome Sallo <[log in to unmask]>

Wed, 11 Nov 1998 12:08:48 EST

25 lines

Re: Need a Number - Solder Station One

Mark Simmons <[log in to unmask]>

Wed, 11 Nov 1998 10:18:02 -0800

27 lines

New Thread

Need help

Need help

Russell Epstein <[log in to unmask]>

Wed, 18 Nov 1998 10:01:26 PST

27 lines

Re: Need help

jim <[log in to unmask]>

Thu, 19 Nov 1998 10:16:23 -0600

52 lines

New Thread

Need Kleenox "P" MSDS and information

Need Kleenox "P" MSDS and information

Moss, Thomas <[log in to unmask]>

Sun, 15 Nov 1998 08:48:00 -0800

32 lines

Re: Need Kleenox "P" MSDS and information

Stephen R. Gregory <[log in to unmask]>

Sun, 15 Nov 1998 20:30:09 EST

211 lines

New Thread

Need PCB Designer in Houston

Need PCB Designer in Houston

Barbara Burcham <[log in to unmask]>

Wed, 11 Nov 1998 16:31:17 -0600

34 lines

Re: Need PCB Designer in Houston

mark ross <[log in to unmask]>

Thu, 12 Nov 1998 11:36:38 -0500

53 lines

New Thread

need test lab for no clean process

need test lab for no clean process

Rudolph Yu <[log in to unmask]>

Wed, 11 Nov 1998 09:19:08 -0800

29 lines

Re: need test lab for no clean process

Bev Christian <[log in to unmask]>

Wed, 11 Nov 1998 15:42:04 -0500

63 lines

Re: need test lab for no clean process

Stephen R. Gregory <[log in to unmask]>

Wed, 11 Nov 1998 21:55:54 EST

89 lines

New Thread

Ni/Pd/Au Lead Finish

Ni/Pd/Au Lead Finish

KELLY M SCHRIVER <[log in to unmask]>

Thu, 19 Nov 1998 14:54:00 -0500

32 lines

Re: Ni/Pd/Au Lead Finish

David D Hillman <[log in to unmask]>

Fri, 20 Nov 1998 16:43:27 -0600

87 lines

New Thread

No SUBJECT e-mail

Re: No SUBJECT e-mail

Werner Engelmaier <[log in to unmask]>

Thu, 5 Nov 1998 23:13:35 EST

32 lines

New Thread

non wetting agent for epoxy resin

non wetting agent for epoxy resin

Chen Fung Leng <[log in to unmask]>

Tue, 17 Nov 1998 17:49:24 -0800

34 lines

New Thread

OSP Dwell between thermal processes

OSP Dwell between thermal processes

[log in to unmask]

Wed, 4 Nov 1998 17:10:22 -0600

35 lines

New Thread

Overcoat Pen

Overcoat Pen

Wilber E Heath weh Wil <[log in to unmask]>

Tue, 17 Nov 1998 10:29:00 -0600

29 lines

New Thread

P and B content in electroless nickel

Re: P and B content in electroless nickel

Richard Haynes <[log in to unmask]>

Sat, 14 Nov 1998 23:10:25 -0500

154 lines

New Thread

PANEL AGITATION IN DEEP NICKEL/GOLD PLATING.

Re: PANEL AGITATION IN DEEP NICKEL/GOLD PLATING.

Lenny Kurup <[log in to unmask]>

Wed, 25 Nov 1998 16:10:45 -0500

32 lines

New Thread

Parylene Conformal Coating

Parylene Conformal Coating

Kelly M. Schriver <[log in to unmask]>

Mon, 2 Nov 1998 15:33:15 -0600

33 lines

Re: Parylene Conformal Coating

Jeremy Drake <[log in to unmask]>

Tue, 3 Nov 1998 08:25:03 +0000

32 lines

New Thread

Pattern Copper Plating

Pattern Copper Plating

Francis Lai <[log in to unmask]>

Sun, 15 Nov 1998 16:52:55 -0500

39 lines

Re: Pattern Copper Plating

Leslie O. Connally <[log in to unmask]>

Mon, 16 Nov 1998 08:16:31 -0600

74 lines

Re: Pattern Copper Plating

Smith Russell MSM LAPO US <[log in to unmask]>

Wed, 18 Nov 1998 07:40:00 +0100

131 lines

New Thread

Pb in ceramic components

Pb in ceramic components

Jos Groffils <[log in to unmask]>

Tue, 10 Nov 1998 16:21:54 +0000

31 lines

Pb in ceramic components

[log in to unmask]

Fri, 13 Nov 1998 08:32:02 +0100

71 lines

Re: Pb in ceramic components

David Whalley <[log in to unmask]>

Fri, 13 Nov 1998 09:24:39 +0000

34 lines

Re: Pb in ceramic components

Werner Engelmaier <[log in to unmask]>

Thu, 12 Nov 1998 08:42:35 EST

40 lines

New Thread

PCB ASSEMBLY COST ANALYSIS

PCB ASSEMBLY COST ANALYSIS

Dave Hamilton <[log in to unmask]>

Wed, 18 Nov 1998 06:10:22 -0500

51 lines

New Thread

PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION

PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION

Management Recruiters of St. Lawrence County <[log in to unmask]>

Wed, 11 Nov 1998 14:20:57 -0500

31 lines

Re: PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION

Ed Cosper <[log in to unmask]>

Thu, 12 Nov 1998 03:29:37 -0600

115 lines

New Thread

PCBA Routing Survey

PCBA Routing Survey

[log in to unmask]

Mon, 30 Nov 1998 16:39:48 EST

57 lines

Re: PCBA Routing Survey

Kimmey, Frank <[log in to unmask]>

Mon, 30 Nov 1998 14:30:22 -0800

107 lines

Re: PCBA Routing Survey

Stephen R. Gregory <[log in to unmask]>

Mon, 30 Nov 1998 17:38:27 EST

61 lines

New Thread

Problem in Gold Plating

Problem in Gold Plating

Francis Lai <[log in to unmask]>

Fri, 6 Nov 1998 17:22:57 -0500

42 lines

Re: Problem in Gold Plating

mcarano <[log in to unmask]>

Fri, 6 Nov 1998 20:45:50 -0600

77 lines

Re: Problem in Gold Plating

Yongheng Zhu <[log in to unmask]>

Fri, 6 Nov 1998 17:48:18 -0600

82 lines

Re: Problem in Gold Plating

Paul Gould <[log in to unmask]>

Wed, 11 Nov 1998 11:41:52 -0000

82 lines

Re: Problem in Gold Plating

[log in to unmask]

Thu, 12 Nov 1998 15:12:50 EST

69 lines

Re: Problem in Gold Plating

[log in to unmask]

Thu, 12 Nov 1998 15:33:30 -0500

72 lines

New Thread

Problem in Gold Plating -Reply

Re: Problem in Gold Plating -Reply

Ken Bridges <[log in to unmask]>

Sun, 15 Nov 1998 07:48:56 -0800

34 lines

New Thread

Process courses

Process courses

Miguel Angel Pulido B. <[log in to unmask]>

Fri, 27 Nov 1998 09:06:05 -0600

30 lines

Re: Process courses

Richard Haynes <[log in to unmask]>

Fri, 27 Nov 1998 12:03:03 -0500

62 lines

New Thread

Protective laminate

Protective laminate

Eric Janssens <[log in to unmask]>

Fri, 13 Nov 1998 10:32:38 +0100

29 lines

New Thread

Pulse Plating - Copper

Pulse Plating - Copper

[log in to unmask]

Wed, 4 Nov 1998 22:06:42 EST

29 lines

New Thread

Pulse Plating Versus DC Plating

Pulse Plating Versus DC Plating

Hinners, Hans - LYPME <[log in to unmask]>

Tue, 17 Nov 1998 10:06:18 -0500

42 lines

New Thread

Pulse Plating: Cu and PCB

Re: Pulse Plating: Cu and PCB

Richard Haynes <[log in to unmask]>

Mon, 16 Nov 1998 14:19:28 -0500

55 lines

New Thread

Q on Ion Chromatography

Q on Ion Chromatography

Tumibay, Aleli <[log in to unmask]>

Mon, 30 Nov 1998 22:42:47 -0500

40 lines

New Thread

QFP leadframe tin-lead finish

QFP leadframe tin-lead finish

[log in to unmask]

Tue, 17 Nov 1998 17:52:40 -0600

36 lines

Re: QFP leadframe tin-lead finish

Matthias Mansfeld <[log in to unmask]>

Wed, 18 Nov 1998 02:47:10 +0100

41 lines

Re: QFP leadframe tin-lead finish

Ahne Oosterhof <[log in to unmask]>

Tue, 17 Nov 1998 17:09:13 -0800

65 lines

Re: QFP leadframe tin-lead finish

Brent Alcorn <[log in to unmask]>

Wed, 18 Nov 1998 22:40:19 -0400

38 lines

New Thread

Quoting Board Builds

Quoting Board Builds

Thibodeau, Chad <[log in to unmask]>

Tue, 3 Nov 1998 13:14:47 -0700

35 lines

New Thread

Quoting Board Builds -Reply

Quoting Board Builds -Reply

David Rist <[log in to unmask]>

Tue, 3 Nov 1998 20:12:59 -0800

63 lines

New Thread

Re Cause/Effect

Re Cause/Effect

[log in to unmask]

Wed, 25 Nov 1998 14:23:55 EST

52 lines

New Thread

Re Gold

Re Gold

[log in to unmask]

Mon, 9 Nov 1998 20:56:18 EST

41 lines

New Thread

Re Repair Limits

Re Repair Limits

[log in to unmask]

Sun, 15 Nov 1998 08:45:38 EST

50 lines

New Thread

Re SolderBalls

Re SolderBalls

[log in to unmask]

Mon, 9 Nov 1998 20:56:22 EST

28 lines

Re: Re SolderBalls

Gary Camac <[log in to unmask]>

Tue, 10 Nov 1998 06:59:02 -0600

50 lines

Re: Re SolderBalls

Hiteshew, Michael <[log in to unmask]>

Tue, 10 Nov 1998 11:02:24 -0500

51 lines

Re: Re SolderBalls

[log in to unmask]

Tue, 10 Nov 1998 10:27:59 EST

35 lines

Re: Re SolderBalls

Vaughan, Ralph H <[log in to unmask]>

Wed, 11 Nov 1998 04:55:03 -0800

76 lines

Re: Re SolderBalls

[log in to unmask]

Wed, 11 Nov 1998 09:13:40 EST

30 lines

Re: Re SolderBalls

[log in to unmask]

Thu, 12 Nov 1998 09:49:07 EST

58 lines

New Thread

RE True Position and Registration on Fab

RE True Position and Registration on Fab

John Laur <[log in to unmask]>

Thu, 19 Nov 1998 15:17:04 -0600

68 lines

New Thread

ReCard Edge Connectors

ReCard Edge Connectors

[log in to unmask]

Thu, 12 Nov 1998 20:16:33 EST

42 lines

New Thread

Recent Discussion on Ni/Pd Finished ICs

Recent Discussion on Ni/Pd Finished ICs

Doug Romm <[log in to unmask]>

Mon, 2 Nov 1998 08:41:33 -0800

163 lines

New Thread

ReEnvironControl

ReEnvironControl

[log in to unmask]

Mon, 9 Nov 1998 20:56:24 EST

36 lines

New Thread

Reflow ovens

Reflow ovens

Evan D Jones <[log in to unmask]>

Tue, 10 Nov 1998 15:12:07 +1000

43 lines

New Thread

Removing wet SMT epoxy from flex circuits....

Removing wet SMT epoxy from flex circuits....

Chan, Marcelo <[log in to unmask]>

Wed, 18 Nov 1998 15:23:41 -0500

28 lines

Re: Removing wet SMT epoxy from flex circuits....

Babyak <[log in to unmask]>

Wed, 18 Nov 1998 15:38:03 +0000

31 lines

New Thread

Repair Limits

Repair Limits

Yves Trudell <[log in to unmask]>

Fri, 13 Nov 1998 11:58:34 -0500

35 lines

Re: Repair Limits

Paul Klasek <[log in to unmask]>

Sun, 15 Nov 1998 11:12:33 +1100

79 lines

New Thread

Resource needed for Palladium/Nickel Service

Resource needed for Palladium/Nickel Service

Chris Dorland <[log in to unmask]>

Mon, 2 Nov 1998 14:46:33 -0500

37 lines

Re: Resource needed for Palladium/Nickel Service

Jim Gleason <[log in to unmask]>

Mon, 2 Nov 1998 17:37:20 -0600

60 lines

New Thread

Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

Re: Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS

Tan Boon Kiat <[log in to unmask]>

Fri, 20 Nov 1998 22:53:56 +0800

276 lines

New Thread

Re[2]: [TN] Soldering to Gold

Re: Re[2]: [TN] Soldering to Gold

Phillip E. Hinton <[log in to unmask]>

Sun, 29 Nov 1998 14:12:53 EST

67 lines

New Thread

rogers

rogers

[log in to unmask]

Tue, 10 Nov 1998 10:32:35 EST

23 lines

Re: rogers

[log in to unmask]

Tue, 10 Nov 1998 09:44:48 -0600

59 lines

Re: rogers

Thomas DeSmit <[log in to unmask]>

Tue, 10 Nov 1998 09:51:44 -0600

61 lines

Re: rogers

Thomas DeSmit <[log in to unmask]>

Tue, 10 Nov 1998 09:57:40 -0600

62 lines

New Thread

Scoring PCAs

Scoring PCAs

[log in to unmask]

Mon, 30 Nov 1998 17:15:45 -0600

38 lines

Re: Scoring PCAs

Stephen R. Gregory <[log in to unmask]>

Mon, 30 Nov 1998 19:03:44 EST

70 lines

New Thread

Screenprint problems

Screenprint problems

Greg Parke <[log in to unmask]>

Fri, 20 Nov 1998 11:54:20 -0500

60 lines

Re: Screenprint problems

Jindra, Larry <[log in to unmask]>

Sat, 21 Nov 1998 11:13:18 -0800

121 lines

Re: Screenprint problems

Seth Goodman <[log in to unmask]>

Sun, 22 Nov 1998 15:17:05 -0600

108 lines

New Thread

Seed for Cu plating in high freq.

Seed for Cu plating in high freq.

Francis Lai <[log in to unmask]>

Sun, 15 Nov 1998 19:07:38 -0500

35 lines

New Thread

Selective Soldering

Selective Soldering

Thibodeau, Chad <[log in to unmask]>

Thu, 5 Nov 1998 14:31:20 -0700

37 lines

Re: Selective Soldering

Jim Gleason <[log in to unmask]>

Thu, 5 Nov 1998 16:15:06 -0600

69 lines

Re: Selective Soldering

McMonagle, Michael R. <[log in to unmask]>

Mon, 9 Nov 1998 07:49:17 -0600

85 lines

New Thread

Selective Soldering Machine

Selective Soldering Machine

Lik-Jen Wu <[log in to unmask]>

Fri, 20 Nov 1998 18:32:20 -0500

31 lines

Re: Selective Soldering Machine

Bridget Piper <[log in to unmask]>

Tue, 24 Nov 1998 11:18:41 -0000

74 lines

New Thread

shear testers

shear testers

Gerard O'Brien <[log in to unmask]>

Thu, 12 Nov 1998 12:00:06 -0500

30 lines

Re: shear testers

Bev Christian <[log in to unmask]>

Thu, 12 Nov 1998 14:06:37 -0500

62 lines

New Thread

Shelf life of HASL fabs.

Shelf life of HASL fabs.

Jon Seubert <[log in to unmask]>

Mon, 23 Nov 1998 23:54:08 -0700

29 lines

Re: Shelf life of HASL fabs.

David D Hillman <[log in to unmask]>

Wed, 25 Nov 1998 06:11:42 -0600

88 lines

New Thread

SIGNOFF *

SIGNOFF *

Dennis Schneider <[log in to unmask]>

Sun, 15 Nov 1998 17:31:32 -0500

52 lines

New Thread

silver migration

silver migration

Jos Groffils <[log in to unmask]>

Mon, 9 Nov 1998 07:20:48 +0000

62 lines

silver migration

[log in to unmask]

Fri, 20 Nov 1998 19:36:32 -0600

36 lines

Re: silver migration

Eric Yakobson <[log in to unmask]>

Mon, 23 Nov 1998 14:55:10 -0500

80 lines

Silver Migration

thomas peters <[log in to unmask]>

Tue, 24 Nov 1998 21:52:59 PST

127 lines

Re: Silver Migration

Eric Yakobson <[log in to unmask]>

Wed, 25 Nov 1998 12:45:51 -0500

89 lines

New Thread

Simple Component Source.

Simple Component Source.

Jack Bryant <[log in to unmask]>

Wed, 11 Nov 1998 00:03:23 -0500

112 lines

Re: Simple Component Source.

Thomas DeSmit <[log in to unmask]>

Tue, 10 Nov 1998 15:54:12 -0600

67 lines

New Thread

SMEMA Printer and SMPI Conveyors

SMEMA Printer and SMPI Conveyors

Scott Davies <[log in to unmask]>

Wed, 11 Nov 1998 09:54:18 -0500

28 lines

Re: SMEMA Printer and SMPI Conveyors

Brad Vanderhoof <[log in to unmask]>

Wed, 11 Nov 1998 11:00:10 -0800

67 lines

New Thread

SMT Glue

SMT Glue

Vinit Verma <[log in to unmask]>

Mon, 30 Nov 1998 13:19:23 +0500

36 lines

Re: SMT Glue

Bev Christian <[log in to unmask]>

Mon, 30 Nov 1998 08:57:16 -0500

66 lines

New Thread

SMT solder balls

SMT solder balls

Jim Christenson <[log in to unmask]>

Mon, 9 Nov 1998 08:08:59 -0800

33 lines

New Thread

SMT ZENER

SMT ZENER

Patten, James <[log in to unmask]>

Wed, 25 Nov 1998 11:44:19 -0800

96 lines

Re: SMT ZENER

Stephen R. Gregory <[log in to unmask]>

Wed, 25 Nov 1998 15:21:40 EST

60 lines

New Thread

SMTA Silicon Valley mtg DFM & ESMT Design for Manuf

SMTA Silicon Valley mtg DFM & ESMT Design for Manuf

Stuart Chessen <[log in to unmask]>

Sat, 7 Nov 1998 08:02:00 -0800

59 lines

New Thread

Solder balls on chip components

Solder balls on chip components

Vinit Verma <[log in to unmask]>

Tue, 10 Nov 1998 12:19:33 -0500

45 lines

Re: Solder balls on chip components

Mark Austin <[log in to unmask]>

Tue, 10 Nov 1998 09:23:00 +0000

102 lines

Re: Solder balls on chip components

Pratap Singh <[log in to unmask]>

Sat, 14 Nov 1998 18:54:23 -0800

78 lines

New Thread

solder comparisons

solder comparisons

<Jason M. Smith> <[log in to unmask]>

Fri, 20 Nov 1998 07:44:32 -0500

34 lines

New Thread

Solder mask Dimple Plates

Solder mask Dimple Plates

STEVEN CASTALDI <[log in to unmask]>

Sat, 7 Nov 1998 20:38:05 -0500

25 lines

New Thread

Solder Mixing

Solder Mixing

Andy Magee <[log in to unmask]>

Thu, 26 Nov 1998 08:51:47 -0500

50 lines

New Thread

Solder on goldfinger

Solder on goldfinger

Tan Boon Kiat <[log in to unmask]>

Fri, 27 Nov 1998 00:35:16 +0800

43 lines

New Thread

solder paste inquery

solder paste inquery

Benedicto Cruz <[log in to unmask]>

Tue, 10 Nov 1998 11:19:38 +0000

39 lines

New Thread

Solder paste inspection

Solder paste inspection

Chan, Marcelo <[log in to unmask]>

Thu, 5 Nov 1998 15:25:00 -0500

32 lines

New Thread

Solder Paste????

Solder Paste????

Paul <[log in to unmask]>

Fri, 6 Nov 1998 12:27:31 -0500

36 lines

Re: Solder Paste????

Manish <[log in to unmask]>

Fri, 6 Nov 1998 13:06:33 -0500

31 lines

New Thread

solder resist between solder land to prevent solder brid ging

Re: solder resist between solder land to prevent solder brid ging

Paul Klasek <[log in to unmask]>

Mon, 2 Nov 1998 15:58:07 +1100

78 lines

New Thread

solder resist between solder land to prevent solder bridging

solder resist between solder land to prevent solder bridging

Ken Fong <[log in to unmask]>

Mon, 2 Nov 1998 10:06:43 EST

30 lines

New Thread

Solderability Head Scratcher

Solderability Head Scratcher

Hugh Scott Miller <[log in to unmask]>

Wed, 18 Nov 1998 05:11:47 -0500

72 lines

Solderability Head Scratcher

[log in to unmask]

Wed, 18 Nov 1998 12:29:27 -0600

35 lines

New Thread

Soldering Palladium plated leads

Re: Soldering Palladium plated leads

Jerry Cupples <[log in to unmask]>

Mon, 9 Nov 1998 16:18:29 -0600

81 lines

New Thread

Soldering to Gold

Soldering to Gold

PAT DIAMOND <[log in to unmask]>

Mon, 2 Nov 1998 13:45:45 EMT+0

45 lines

Soldering to Gold

[log in to unmask]

Wed, 18 Nov 1998 12:19:37 -0600

34 lines

Re: Soldering to Gold

Jerry Cupples <[log in to unmask]>

Wed, 18 Nov 1998 15:07:36 -0600

82 lines

Re: Soldering to Gold

Phillip E. Hinton <[log in to unmask]>

Sun, 22 Nov 1998 19:55:08 EST

57 lines

New Thread

Soldermask adhesion over tin/lead

Soldermask adhesion over tin/lead

Terrie Balck <[log in to unmask]>

Mon, 9 Nov 1998 12:51:56 -0800

30 lines

Re: Soldermask adhesion over tin/lead

Joe Felts <[log in to unmask]>

Tue, 10 Nov 1998 00:47:36 -0700

51 lines

New Thread

Soldermask adhesion over tin/lead -Reply

Soldermask adhesion over tin/lead -Reply

bob metcalf <[log in to unmask]>

Tue, 10 Nov 1998 16:26:19 -0800

44 lines

New Thread

Soldermask Breakdown in Humidity Chamber

Soldermask Breakdown in Humidity Chamber

Pedersen, Anders <[log in to unmask]>

Thu, 5 Nov 1998 10:45:01 -0500

43 lines

Re: Soldermask Breakdown in Humidity Chamber

Richard Haynes <[log in to unmask]>

Thu, 5 Nov 1998 17:58:11 -0500

87 lines

New Thread

SOLDERMASK PLUGGED VIAS

SOLDERMASK PLUGGED VIAS

Lolmaugh, Scott (AZ15) <[log in to unmask]>

Wed, 4 Nov 1998 11:29:31 -0700

35 lines

New Thread

Soldermask surface prep

Soldermask surface prep

Ed Cosper <[log in to unmask]>

Tue, 10 Nov 1998 01:59:13 -0600

36 lines

New Thread

SPC

SPC

Alan Kreplick <[log in to unmask]>

Mon, 16 Nov 1998 07:16:47 -0500

40 lines

Re: SPC

PELCHAT_JM <[log in to unmask]>

Mon, 16 Nov 1998 08:24:42 -0500

74 lines

Re: SPC

Ed Cosper <[log in to unmask]>

Mon, 16 Nov 1998 20:41:26 -0600

157 lines

Re: SPC

Greg Jones <[log in to unmask]>

Mon, 16 Nov 1998 10:28:54 -0800

77 lines

Re: SPC

[log in to unmask]

Tue, 17 Nov 1998 11:42:47 -0500

200 lines

New Thread

Spec ref for lifted pad after assy

Spec ref for lifted pad after assy

Steve Collins <[log in to unmask]>

Thu, 12 Nov 1998 13:05:57 -0700

31 lines

Re: Spec ref for lifted pad after assy

Steve Collins <[log in to unmask]>

Thu, 12 Nov 1998 14:57:10 -0700

95 lines

Re: Spec ref for lifted pad after assy

Dave Acton <[log in to unmask]>

Thu, 12 Nov 1998 17:19:48 -0500

136 lines

New Thread

Specctra router Question

Specctra router Question

Dave Connitt <[log in to unmask]>

Wed, 25 Nov 1998 13:00:12 -0500

79 lines

New Thread

Specification

Specification

Neil Trivedi <[log in to unmask]>

Fri, 20 Nov 1998 14:05:49 -0600

36 lines

New Thread

SRT

SRT

Joshua Forrester <[log in to unmask]>

Tue, 24 Nov 1998 14:18:44 -0600

23 lines

Re: SRT

Fikreta Jusufagic <[log in to unmask]>

Tue, 24 Nov 1998 15:40:10 -0800

41 lines

Re: SRT

Rick Thompson <[log in to unmask]>

Tue, 24 Nov 1998 17:04:21 -0800

54 lines

New Thread

Standards

Re: Standards

Erik Nilsson <[log in to unmask]>

Tue, 24 Nov 1998 18:25:03 -0600

69 lines

New Thread

Stripping Enamel covered wires

Stripping Enamel covered wires

PAT DIAMOND <[log in to unmask]>

Wed, 11 Nov 1998 16:01:40 EMT+0

33 lines

Re: Stripping Enamel covered wires

KK Chin <[log in to unmask]>

Wed, 11 Nov 1998 09:02:09 -0800

76 lines

New Thread

Subj: Re: [TN] SMT ZENER

Subj: Re: [TN] SMT ZENER

Stephen R. Gregory <[log in to unmask]>

Wed, 25 Nov 1998 16:19:51 EST

41 lines

Re: Subj: Re: [TN] SMT ZENER

Patten, James <[log in to unmask]>

Wed, 25 Nov 1998 13:58:39 -0800

69 lines

Re: Subj: Re: [TN] SMT ZENER

Patten, James <[log in to unmask]>

Wed, 25 Nov 1998 14:20:32 -0800

67 lines

New Thread

Subscribe

Subscribe

Ted Tessiert <[log in to unmask]>

Thu, 26 Nov 1998 00:14:13 -0800

27 lines

New Thread

Syracuse Area DC Chapter

Syracuse Area DC Chapter

[log in to unmask]

Thu, 12 Nov 1998 15:18:26 EST

41 lines

New Thread

Temp & Humidity in SMT plant.

Temp & Humidity in SMT plant.

Sira Rikulsurakan <[log in to unmask]>

Wed, 11 Nov 1998 07:44:56 +0700

28 lines

New Thread

Temp Profiling

Re: Temp Profiling

David Whalley <[log in to unmask]>

Mon, 9 Nov 1998 17:38:00 +0000

48 lines

Re: Temp Profiling

Werner Engelmaier <[log in to unmask]>

Wed, 11 Nov 1998 15:01:51 EST

61 lines

Re: Temp Profiling

Werner Engelmaier <[log in to unmask]>

Thu, 12 Nov 1998 08:29:18 EST

54 lines

New Thread

Test message - please disregard

Test message - please disregard

Hugo Scaramuzza <[log in to unmask]>

Tue, 17 Nov 1998 15:56:09 -0600

32 lines

New Thread

TEST: Flying "Grid", not "Probe"

TEST: Flying "Grid", not "Probe"

Test Engineering <[log in to unmask]>

Sat, 7 Nov 1998 07:57:46 -0500

32 lines

New Thread

Thermal Resistance Testing labs

Thermal Resistance Testing labs

Yuan Li <[log in to unmask]>

Fri, 6 Nov 1998 13:15:33 -0800

24 lines

New Thread

THERMOPLASTIC RELIABILITY

THERMOPLASTIC RELIABILITY

[log in to unmask]

Thu, 19 Nov 1998 13:04:35 +0100

41 lines

Re: THERMOPLASTIC RELIABILITY

Marianne Romansky <[log in to unmask]>

Thu, 19 Nov 1998 10:03:47 -0500

38 lines

Re: THERMOPLASTIC RELIABILITY

[log in to unmask]

Fri, 20 Nov 1998 08:43:05 +0100

52 lines

Re: THERMOPLASTIC RELIABILITY

Werner Engelmaier <[log in to unmask]>

Thu, 19 Nov 1998 10:13:32 EST

65 lines

Re: THERMOPLASTIC RELIABILITY

Bill Davis <[log in to unmask]>

Mon, 23 Nov 1998 08:46:25 -0800

96 lines

New Thread

Tin Oxide

Tin Oxide

Kathy Palumbo <[log in to unmask]>

Wed, 25 Nov 1998 15:51:39 -0800

41 lines

Re: Tin Oxide

Stephen R. Gregory <[log in to unmask]>

Wed, 25 Nov 1998 19:12:10 EST

62 lines

Re: Tin Oxide

[log in to unmask]

Thu, 26 Nov 1998 08:14:11 +0100

95 lines

Tin Oxide

[log in to unmask]

Thu, 26 Nov 1998 04:56:00 -0600

38 lines

Re: Tin Oxide

Bev Christian <[log in to unmask]>

Thu, 26 Nov 1998 08:34:30 -0500

96 lines

Re: Tin Oxide

[log in to unmask]

Fri, 27 Nov 1998 08:19:43 +0100

142 lines

Re: Tin Oxide

Bev Christian <[log in to unmask]>

Fri, 27 Nov 1998 08:14:03 -0500

170 lines

Re: Tin Oxide

<Rudy Sedlak> <[log in to unmask]>

Mon, 30 Nov 1998 09:52:19 EST

51 lines

New Thread

Tin/Lead Solder Coating Minimum Thickness Requirements

Tin/Lead Solder Coating Minimum Thickness Requirements

Hugh Scott Miller <[log in to unmask]>

Wed, 18 Nov 1998 05:09:27 -0500

48 lines

Tin/Lead Solder Coating Minimum Thickness Requirements

[log in to unmask]

Wed, 18 Nov 1998 12:41:43 -0600

35 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Eddie Brunker <[log in to unmask]>

Thu, 19 Nov 1998 10:33:07 GMT

71 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

[log in to unmask]

Thu, 19 Nov 1998 09:31:23 -0600

81 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Jindra, Larry <[log in to unmask]>

Thu, 19 Nov 1998 10:11:28 -0800

125 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Eddie Brunker <[log in to unmask]>

Fri, 20 Nov 1998 14:06:39 GMT

156 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Eddie Brunker <[log in to unmask]>

Fri, 20 Nov 1998 14:32:41 GMT

65 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Rob Horsley <[log in to unmask]>

Fri, 20 Nov 1998 14:57:54 +0000

35 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

[log in to unmask]

Fri, 20 Nov 1998 09:55:37 -0600

46 lines

Re: Tin/Lead Solder Coating Minimum Thickness Requirements

Fred Shubert <[log in to unmask]>

Fri, 20 Nov 1998 14:49:15 -0500

86 lines

Tin/Lead Solder Coating Minimum Thickness Requirements

[log in to unmask]

Fri, 20 Nov 1998 19:28:47 -0600

49 lines

New Thread

Touch Up Pen's

Touch Up Pen's

Len Fournier <[log in to unmask]>

Wed, 11 Nov 1998 17:04:12 -0500

34 lines

Re: Touch Up Pen's

Steve Loschiavo <[log in to unmask]>

Wed, 11 Nov 1998 18:34:10 -0800

70 lines

New Thread

True Position and Registration on Fab

True Position and Registration on Fab

Ken Patel <[log in to unmask]>

Wed, 18 Nov 1998 17:03:21 -0800

41 lines

Re: True Position and Registration on Fab

Joseph Fjelstad <[log in to unmask]>

Fri, 20 Nov 1998 07:41:36 -0800

70 lines

Re: True Position and Registration on Fab

Mike Mikucki <[log in to unmask]>

Fri, 20 Nov 1998 10:37:43 -0500

85 lines

New Thread

Unclad FR4 Laminate?

Unclad FR4 Laminate?

Rick Thompson <[log in to unmask]>

Wed, 25 Nov 1998 06:29:58 -0800

42 lines

New Thread

UV Cure Touchup

UV Cure Touchup

Alex Neussendorfer <[log in to unmask]>

Wed, 11 Nov 1998 18:02:20 -0600

77 lines

New Thread

Via holes on SMD pads?

Via holes on SMD pads?

Mike Meanor <[log in to unmask]>

Wed, 4 Nov 1998 17:29:12 -0800

39 lines

Re: Via holes on SMD pads?

Hiteshew, Michael <[log in to unmask]>

Thu, 5 Nov 1998 13:11:16 -0500

39 lines

Via holes on SMD pads?

Thomas Martin <[log in to unmask]>

Fri, 6 Nov 1998 11:08:59 -0500

31 lines

Via holes on SMD pads?

[log in to unmask]

Wed, 25 Nov 1998 13:56:07 -0600

45 lines

New Thread

Vision Systems for inspection

Vision Systems for inspection

[log in to unmask]

Wed, 11 Nov 1998 10:36:42 -0600

46 lines

Re: Vision Systems for inspection

[log in to unmask]

Wed, 11 Nov 1998 14:09:21 -0600

43 lines

Re: Vision Systems for inspection

Roland Jaquet <[log in to unmask]>

Wed, 11 Nov 1998 21:45:28 +0100

134 lines

New Thread

Visual Inspection of Misprinted boards after cleaning

Visual Inspection of Misprinted boards after cleaning

[log in to unmask]

Wed, 18 Nov 1998 19:36:10 -0500

30 lines

Re: Visual Inspection of Misprinted boards after cleaning

<Mary Smoot> <[log in to unmask]>

Fri, 20 Nov 1998 08:41:11 -0500

74 lines

New Thread

wage and rates for QA managers

wage and rates for QA managers

[log in to unmask]

Mon, 9 Nov 1998 14:47:04 EST

24 lines

Re: wage and rates for QA managers

Don Vischulis <[log in to unmask]>

Mon, 9 Nov 1998 21:49:04 -0600

36 lines

New Thread

Wanted: Motorola BGA

Wanted: Motorola BGA

Scott Davies <[log in to unmask]>

Wed, 11 Nov 1998 09:51:00 -0500

28 lines

New Thread

wash mashine noise on assembly floor

wash mashine noise on assembly floor

Fikreta Jusufagic <[log in to unmask]>

Tue, 10 Nov 1998 17:25:18 -0800

29 lines

Re: wash mashine noise on assembly floor

[log in to unmask]

Wed, 11 Nov 1998 13:56:59 -0600

41 lines

Re: wash mashine noise on assembly floor

Graham Naisbitt <[log in to unmask]>

Fri, 13 Nov 1998 12:56:42 -0000

93 lines

Re: wash mashine noise on assembly floor

[log in to unmask]

Fri, 13 Nov 1998 10:50:29 -0600

54 lines

New Thread

Wave Solder Fixtures

Wave Solder Fixtures

Reginald Swipe <[log in to unmask]>

Fri, 6 Nov 1998 13:41:14 PST

32 lines

Re: Wave Solder Fixtures

Thomas C Han <[log in to unmask]>

Fri, 6 Nov 1998 15:05:58 -0800

65 lines

Re: Wave Solder Fixtures

Valquirio N. Carvalho <[log in to unmask]>

Fri, 6 Nov 1998 19:00:38 -0500

103 lines

Re: Wave Solder Fixtures

[log in to unmask]

Sat, 7 Nov 1998 05:59:52 -0600

70 lines

Re: Wave Solder Fixtures

Jim Gleason <[log in to unmask]>

Fri, 6 Nov 1998 19:26:49 -0600

57 lines

Re: Wave Solder Fixtures

DOUG BENEFIEL <[log in to unmask]>

Sat, 7 Nov 1998 00:34:20 -0800

84 lines

Re: Wave Solder Fixtures

Stephen R. Gregory <[log in to unmask]>

Sat, 7 Nov 1998 17:31:09 EST

44 lines

Re: Wave Solder Fixtures

Mark Austin <[log in to unmask]>

Mon, 9 Nov 1998 12:25:00 +0000

113 lines

Re: Wave Solder Fixtures

Steve Hodgkinson <[log in to unmask]>

Wed, 11 Nov 1998 12:46:14 +0000

31 lines

New Thread

Weird Wave Soldering Defect...

Weird Wave Soldering Defect...

Stephen R. Gregory <[log in to unmask]>

Mon, 16 Nov 1998 18:51:17 EST

47 lines

Re: Weird Wave Soldering Defect...

Evan D Jones <[log in to unmask]>

Tue, 17 Nov 1998 11:05:35 +1000

102 lines

Re: Weird Wave Soldering Defect...

Stephen R. Gregory <[log in to unmask]>

Mon, 16 Nov 1998 19:28:13 EST

46 lines

Re: Weird Wave Soldering Defect...

<Jason M. Smith> <[log in to unmask]>

Tue, 17 Nov 1998 07:55:50 -0500

83 lines

Re: Weird Wave Soldering Defect...

KELLY M SCHRIVER <[log in to unmask]>

Tue, 17 Nov 1998 08:17:00 -0500

38 lines

Re: Weird Wave Soldering Defect...

Pratap Singh <[log in to unmask]>

Thu, 19 Nov 1998 21:20:42 -0800

66 lines

Re: Weird Wave Soldering Defect...

Paul Gould <[log in to unmask]>

Tue, 24 Nov 1998 18:24:26 -0000

88 lines

New Thread

Wet lamination

Wet lamination

Terry Zhu <[log in to unmask]>

Tue, 17 Nov 1998 19:09:37 +0000

24 lines

New Thread

What happens when polarising occurs

What happens when polarising occurs

Francis Lai <[log in to unmask]>

Sun, 29 Nov 1998 12:13:19 -0500

29 lines

New Thread

Wierd Wavesoldering defect

Wierd Wavesoldering defect

Kasprzak, Bill (esd) US <[log in to unmask]>

Tue, 17 Nov 1998 07:28:00 PST

38 lines

New Thread

Will insufficient solder cause high loss

Will insufficient solder cause high loss

Francis Lai <[log in to unmask]>

Sat, 21 Nov 1998 20:47:15 -0500

27 lines

New Thread

Working Environment Controls

Working Environment Controls

Kenny Bloomquist <[log in to unmask]>

Mon, 9 Nov 1998 09:12:50 -0800

45 lines

New Thread

your mail

Re: your mail

Lenny Kurup <[log in to unmask]>

Thu, 19 Nov 1998 10:41:10 -0500

53 lines

New Thread

your warning

Re: your warning

Vinit Verma <[log in to unmask]>

Wed, 18 Nov 1998 09:53:29 -0500

48 lines

Re: your warning

Matthias Mansfeld <[log in to unmask]>

Wed, 18 Nov 1998 09:20:26 +0100

91 lines

Re: your warning

Ian Squires <[log in to unmask]>

Wed, 18 Nov 1998 10:48:06 PST

142 lines

Re: your warning

Cobey Schmidt <[log in to unmask]>

Wed, 18 Nov 1998 08:57:47 -0600

208 lines

New Thread

[Fwd: Solder-ball]

[Fwd: Solder-ball]

Brian Koo <[log in to unmask]>

Tue, 10 Nov 1998 09:28:16 -0800

96 lines

Re: [Fwd: Solder-ball]

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Nov 1998 16:11:07 EST

77 lines

Re: [Fwd: Solder-ball]

Tan Boon Kiat <[log in to unmask]>

Fri, 20 Nov 1998 21:53:09 +0800

129 lines

New Thread

[TN] Annular Ring !

Re[2]: [TN] Annular Ring !

<Andy Slade> <[log in to unmask]>

Sat, 7 Nov 1998 07:57:37 -0500

70 lines

New Thread

[TN] Intermittent Dewetting

Re[2]: [TN] Intermittent Dewetting

Mike Aldrich <[log in to unmask]>

Tue, 3 Nov 1998 15:53:46 -0500

65 lines

New Thread

[TN] Weird Wave Soldering Defect...

Re[2]: [TN] Weird Wave Soldering Defect...

PELCHAT_JM <[log in to unmask]>

Wed, 18 Nov 1998 06:48:21 -0500

75 lines

New Thread

[TN] [Fwd: Solder-ball]

Re[2]: [TN] [Fwd: Solder-ball]

PELCHAT_JM <[log in to unmask]>

Wed, 11 Nov 1998 07:22:56 -0500

110 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager