LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


January 1998


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

回覆 : (1 message)
(Fwd) Cracked Vias (1 message)
(no subject) (2 messages)
0402 components skewing, tombstoning, dislodging during SMT reflow (1 message)
1998 MICROELECTRONICS COURSES (2 messages)
2-sided fine pitch assembly (4 messages)
:Electroform Stencil (3 messages)
<No subject> (25 messages)
??? (3 messages)
Acetone of SMT assemblies (5 messages)
ADMIN: IPC's email forums archives (1 message)
ADMIN: Re: [TN] ??? (1 message)
ADMIN: Test - please ignore (1 message)
ADMIN:Re: [TN] IPCchat session announcement (1 message)
Advanced Printed Circuit Technology Seminar serving New (1 message)
Advanced Printed Circuit Technology Seminar serving New England (1 message)
air voids in multi (8 messages)
air voids in multi -Reply (1 message)
Ammonia Etchant - Replenisher (4 messages)
Any No Clean Flux for Thick PCB's? (4 messages)
Asf for Information (1 message)
Assembling backplane PWBs (1 message)
Assembly (1 message)
Assembly - Conformal Coating (1 message)
Assembly Floor Humidity Requirements (7 messages)
Assembly Floor Humidity Requirements -Reply (1 message)
ASSY: Conductive epoxies and radiation exposure (3 messages)
Assy: Forced Air Convection Ovens (4 messages)
ASSY: Non-wetting QFPs (1 message)
ASSY: Non-wetting QFPs -Reply (1 message)
Assy: Reflow Oven Card Carriers (4 messages)
Assy: Soldering Terminals (6 messages)
Assy:Min distance between vias in wavesoldering (3 messages)
Au/Pd/Ni Board finish (2 messages)
Automated Notification of New Document Releases (1 message)
Automated wirebond verification machine (3 messages)
BGA reballing, Reply to. (1 message)
BGA Reballing. (5 messages)
BGA Reballing. -Reply (2 messages)
BGA reflow oven profile? (5 messages)
BGA reflow time (2 messages)
BGA Rework Site Dressing (2 messages)
BGA SPECS (1 message)
Black Oxide (3 messages)
Board Specification (2 messages)
Bob Willis Details (1 message)
Bob Willis e-mail!! (2 messages)
Bonded PCB Stiffeners (1 message)
BT resin etching condition (2 messages)
BT resin etching condition (II) (1 message)
BuCu for flex circuits (3 messages)
BuCu for flex circuits -Reply (1 message)
BURR (10 messages)
Burrs on FETs (3 messages)
Calculation formulae for diff. striplines (1 message)
Call for papers Joint European Conference VII (2 messages)
CAM Software info. (2 messages)
Camelot's Gemini paste dispensing (1 message)
Camtek AOI -Reply (1 message)
Carbon ink contacts (1 message)
Chinese Character Sets (1 message)
Class 3 & No Clean Flux (2 messages)
CMP Equipment/Process related forum (2 messages)
Cold Solder and Solder Shorts (2 messages)
Colight 1630 (2 messages)
Conformal coating (5 messages)
Conformal coating -Reply (1 message)
CONFORMAL COATINGS ON PCBS (4 messages)
Convection Oven Selection (1 message)
Copper Pattern Plating Line Improvements (1 message)
Copper Pattern Plating Line Improvements -Reply (1 message)
copper plane clearance (3 messages)
Crack detection under BGA? (6 messages)
Cracked Vias (6 messages)
current density of large pads (1 message)
CuSn Intermetallic growth (1 message)
Dead Pad Removal (6 messages)
Dead Pad Removal -Reply (2 messages)
Des: Thermal relief on gnd/pwr planes (2 messages)
Design Complexity (6 messages)
Design for Manufacturing (2 messages)
Design for Manufacturing -Reply (1 message)
Design Requirements (1 message)
Detached QFP. (2 messages)
DFX - Design for Excellence (2 messages)
DIMMS Card Assemblies (1 message)
Drills (3 messages)
Dynapert technician (1 message)
EKRA screen and stencil printing machines (1 message)
Electroless tin (1 message)
Employment opps (2 messages)
Entek boards / In Circuit Testing problems (6 messages)
F&K & ASM equipment feedback (1 message)
FAB: BeCu for flex circuits (1 message)
Fab: Dishdowns? (2 messages)
Fab: Dishdowns? -Reply (1 message)
FAB: HASL vs. anything else (3 messages)
FAB: HASL vs. anything else -Reply (3 messages)
FAB: HASL vs. anything else -Reply -Reply (4 messages)
FAB: HASL vs. Flubber (2 messages)
FAB: HASL vs. Flubber -Reply (1 message)
FAB: Horizontal electroplating line (1 message)
FAB: Peroxide Microetch Degreasers (3 messages)
FAB: Pure Gold Process (2 messages)
fab:B24 board connector (2 messages)
File format for Shinkawa wire bonders? (1 message)
filling the copper (2 messages)
Finding shorts & opens inside PWB's (6 messages)
Flip Chip (3 messages)
Flux Corrosivity (2 messages)
Flux Evaluation-reply (2 messages)
FOOTPRINTS (3 messages)
Forced Air Convection Ovens (12 messages)
FR4 Laminate (2 messages)
FR4 Laminate details (5 messages)
FR4 Laminate details (in India...) (1 message)
FSL (3 messages)
FW: SM'97 Presentation Material (1 message)
Fw: [DC] Question on Plated holes (1 message)
FW: [TN] Acetone of SMT assemblies (1 message)
FW: [TN] BGA Coplanarity (2 messages)
FW: [TN] BURR (1 message)
FW: [TN] Flux Evaluation (1 message)
FW: [TN] Forced Air Convection Ovens (1 message)
FW: [TN] Need a test lab for IC failure analysis (1 message)
FW: [TN] Steve McBride [TN] Design for Manufacturing (2 messages)
Fw: [TN] What is gerber & what format is good.... (1 message)
GDS2 (1 message)
GEN: Comparison Study (1 message)
GEN: Where to get: Conformal coating (1 message)
Gold Flash benefits over HAL (7 messages)
Gold Plating and solderability ? (5 messages)
Gold Plating Question (11 messages)
Gold Tinning Pot (2 messages)
Greater Boston IPCDC Chapter Meeting, Jan 7th @ 6pm (1 message)
Haloing (3 messages)
Haloing Part 2 (1 message)
HASL solder specs (1 message)
help (1 message)
HELP - Obsolete CEM-1 .063 1/1 (1 message)
Help! (2 messages)
Hi Check parts (1 message)
High voltage circuit trace questions. (2 messages)
How to contact Walt Brandler (1 message)
Immersion Gold & Compliant Pin (2 messages)
Info for the PCMI (1 message)
Inquiry on persons (2 messages)
IPC homepage address (3 messages)
IPC question (3 messages)
IPC SPECS and PWB COUPONS (1 message)
IPC Standard (or any other) for building cables (2 messages)
IPC-MF-150 (2 messages)
IPC-MF-150 -Reply (1 message)
IPCchat session announcement (5 messages)
j-std-001 a and b (1 message)
j-std-001a/b (2 messages)
JEDEC website? (3 messages)
Jumper wire adhesive (8 messages)
Just a few additions to Ed's thought... (1 message)
Ken Patel (1 message)
Ken, (1 message)
Lamination Hold Times (3 messages)
Laminators and IPC-4101 (1 message)
Landpatterns for TQFP devices (8 messages)
Late Material or Parts (3 messages)
Late Production Cost Analysis (1 message)
Lead Soderability - second reflow (3 messages)
Lead Soderability - second reflow -Reply (1 message)
Lead Solderability - second reflow (2 messages)
Lead Solderability - second reflow -Reply (2 messages)
Little coax connectors (2 messages)
Looking for: PCB laminate trading company (1 message)
meba machines (1 message)
Mentor Users (3 messages)
Metallurgical Failure Analysis course (1 message)
MIL Board (1 message)
MIL SPEC HI REL CLEANLINESS VALUE IN mg/sq in? (2 messages)
Mil Spec. (6 messages)
MIL-810E humidity test (1 message)
Mil-P-55617 (2 messages)
Minimum dia drilled (2 messages)
Moisture Sensitive Devices - Absorption Labels (1 message)
MTBF calculations for a system (4 messages)
Multi-Layer Boards (1 message)
Need a test lab for IC failure analysis (3 messages)
Need an Omegameter (1 message)
New IPC Designers Council chapters (1 message)
Not All Solder is Made Alike? (3 messages)
Olin 7025 (2 messages)
Op AMp cross reference (3 messages)
Organic residue in cupric chloride fina (1 message)
Organic residue in cupric chloride final etch (3 messages)
OSP (3 messages)
OSP & Galvanic Etch (4 messages)
OSP RESIDUE (1 message)
Overheated solder joints (5 messages)
Overheated solder joints -Reply (1 message)
Oxide Lines (1 message)
passing grade SIR testing (3 messages)
Paste velocity thru apertures (approximate value) (5 messages)
Paste velocity thru apertures (approximate value) -Reply (1 message)
PCB Design Verification Tools (1 message)
PCB Laminate FAQ (1 message)
PCB Laminate FAQ - Vetronite ? (1 message)
PCB Mfg - Cam software survey. (6 messages)
PCB Solderability Analysis (7 messages)
Philadelphia Designers Council (1 message)
Pinless Lamination (1 message)
Pinless Routing (External Pinning Method) (1 message)
Plating Adhesions and Poiso (1 message)
Pluractec (3 messages)
Pluractec / pinning machines (1 message)
Poor soldering of 240 pin PQFP (1 message)
POOR SOLDERING OF 240 PIN PQFP LEADS (1 message)
Poor Soldering of 240 pin PQFPs (1 message)
Poor Soldering of 240 pin PQFPs -Reply (1 message)
Poor Soldering of 240 pin PQFPs more info (4 messages)
Post Lamination Edge Finishing (2 messages)
Power Backplane Technology (1 message)
Pre-Wave Solder Baking (1 message)
Preflux (1 message)
Process eval. boards (1 message)
pull test >>> IPC FELLOW NEEDED PLEASE ! > IPC-SM-785 ! (3 messages)
pull test std (3 messages)
Punch needed (2 messages)
PVC (1 message)
PWB Coupons (3 messages)
Re : Design Houses in Australia (2 messages)
Re. Wave solder machine (2 messages)
Reduced Black Oxide (4 messages)
Reduced Black Oxide -Reply (1 message)
Reflow time for BGA and SMT (4 messages)
Reflow time for BGA and SMT -Reply (1 message)
Remove (3 messages)
Request for Stencil Aperture Shapes (1 message)
Research money available for the industry (1 message)
respons on trace impedance over perforated planes (1 message)
Re[2]: [TN] Ammonia Etchant - Replenisher (2 messages)
Re[2]: [TN] SIR Reading (2 messages)
RF Circuitry and Rosin Core Solder (10 messages)
RF layouts (2 messages)
routing (3 messages)
scicards conversion (3 messages)
Serial # on PCB Washing off in rinse (4 messages)
Serial # on PCB Washing off in rinse -Reply (3 messages)
Shrinkage Probelm in CEM-3 Material (1 message)
sign off assistance for Anthony Peirano (1 message)
Silver Conductive epoxy (3 messages)
Silver epoxy (1 message)
Silver epoxy again (1 message)
Simon, (1 message)
SIR Reading (4 messages)
Small holes, Thick Boards & Hole Reliability (6 messages)
SMT Connector Testing (1 message)
Solder Paste on PTH Boards. tickness=125 mils (2 messages)
Solder Paste Safety (1 message)
Solder spots on gold fingers (6 messages)
Solder spots on gold fingers -Reply (1 message)
Solder Thickness (1 message)
Solderability During Remelt (2 messages)
Solderability During Remelt -Reply (1 message)
Soltec Wave Solder Machine (1 message)
Soltec WaveSoldering Machines (3 messages)
SPEC. OF IVH,BVH (3 messages)
Splice tape... (2 messages)
Stencil Aperture Shapes (2 messages)
Stencil Aperture Shapes -Reply (11 messages)
Stencil Aperture Shapes -Reply -Reply (1 message)
Stencil Aperture Shapes -Reply -Reply -Reply -Reply (1 message)
Stencil Format (1 message)
Stencil Format- correction (1 message)
Stencil Print Glue (2 messages)
Steve McBride [TN] Design for Manufacturing (1 message)
Subscribe (2 messages)
Summary (and Closure?) RE: Area of Cylinder (1 message)
Surface Mount Council Annouces Vision 2010 Workshop. (1 message)
Surface Tension Constant (1 message)
Tech Net Listing (1 message)
TechNet Digest - 13 Jan 1998 (2 messages)
Technical handbook credits (1 message)
Techniques to locate power and ground short on PWB bare board (1 message)
Test,please ignore (2 messages)
Thank you all (7 messages)
Thank you all! (1 message)
Thermal Conditions to Cause Damage to MSDs (1 message)
Thermal cycling (4 messages)
Thermal Relief at Ground/Power Plane Connections (6 messages)
Thermal relief/ Forced Convection (1 message)
Thermal relief/Sub-contract (1 message)
Thermount properties (2 messages)
Thermount properties -Reply (1 message)
Thickfilm process / hybrids (3 messages)
Tin/Lead Reflow vs. SMOBC (1 message)
Tin/Lead Reflow vs. SMOBC -Reply (1 message)
To Dimitry Skylar (1 message)
Tombstoning of 1210 Caps (6 messages)
Tombstoning of 1210 Caps -Reply (1 message)
Trace Impedance over a gridded ground plane ... (3 messages)
Track spacing for FCC requirements (3 messages)
UL 94V-0 Question (7 messages)
unsubscibe (1 message)
UNSUBSCRIBE (4 messages)
UNSUBSCRIBE!!!!!!! (1 message)
Use of Solder Mask Defined pads for BGA ? (7 messages)
Used Amistar and Herotech for sale (1 message)
VENTURE CAPITALISTS TELL ALL ON CD- (2 messages)
Wafer Backgrind tape (1 message)
Wave Solder requirements (1 message)
What is gerber & what format is good.... (5 messages)
white tin (2 messages)
Wire Bonding (3 messages)
You might all be interested in the definitive manual on "today's (1 message)
You might all be interested in the definitive manual on"today's (1 message)
[2] Design Complexity (1 message)
[ASSY] Request for Info. (2 messages)
[DC] Question on Plated holes (1 message)
[Fwd: BGA VOIDS] (1 message)
[TECHNET] ADMIN: ChipNet Moved to the new mailsystem. (1 message)
[TECHNET] ADMIN: ComplianceNet Moved to the new mail system. (1 message)
[TECHNET] ADMIN: IPCsm840 Moved to the new mailsystem. (1 message)
[TECHNET] ADMIN: Roadmap Moved to the new mailsystem. (1 message)
[TECHNET] ADMIN: TechNet Moved to the new mailsystem. (1 message)
[TN] Ammonia Etchant - Replenisher (2 messages)
[TN] BURR (1 message)
[TN] Gold Flash benefits over HAL (1 message)
[TN] Landpatterns for TQFP devices (2 messages)
[TN] Late Material or Parts (1 message)
[TN] PCB Mfg - Cam software survey. (1 message)
[TN] RF Circuitry and Rosin Core Solder (1 message)
[TN] SIR Reading (1 message)
[TN] Wire Bonding (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

回覆 :

回覆 :

Weber Chuang <[log in to unmask]>

Wed, 7 Jan 1998 10:29:07 +0800

283 lines

New Thread

(Fwd) Cracked Vias

(Fwd) Cracked Vias

MICHAEL DODSON <[log in to unmask]>

Wed, 7 Jan 1998 10:53:28 +0000

15 lines

New Thread

(no subject)

(no subject)

Bhuvana viswanathan <"[log in to unmask]"@[log in to unmask]>

Tue, 20 Jan 1998 10:01:58 -0600

24 lines

Re: (no subject)

Goldman, Patricia J. <[log in to unmask]>

Tue, 20 Jan 1998 16:32:00 PST

52 lines

New Thread

0402 components skewing, tombstoning, dislodging during SMT reflow

0402 components skewing, tombstoning, dislodging during SMT reflow

Tony Coker <[log in to unmask]>

Tue, 27 Jan 1998 17:00:15 -0500

26 lines

New Thread

1998 MICROELECTRONICS COURSES

1998 MICROELECTRONICS COURSES

[log in to unmask]

Mon, 26 Jan 1998 12:12:44 +0000

34 lines

1998 MICROELECTRONICS COURSES

[log in to unmask]

Mon, 26 Jan 1998 12:23:28 +0000

89 lines

New Thread

2-sided fine pitch assembly

2-sided fine pitch assembly

Steve Schrader <[log in to unmask]>

Tue, 20 Jan 1998 15:40:09 -0500

49 lines

Re: 2-sided fine pitch assembly

Douglas H Bennett- Sales Engineer <[log in to unmask]>

Wed, 21 Jan 1998 14:02:29 -0800

92 lines

Re: 2-sided fine pitch assembly

Nicholas Kane <[log in to unmask]>

Thu, 22 Jan 1998 08:19:51 +1100

120 lines

Re: 2-sided fine pitch assembly

LI YUAN <[log in to unmask]>

Thu, 22 Jan 1998 15:05:41 -0700

147 lines

New Thread

:Electroform Stencil

:Electroform Stencil

Poh Kong Hui <[log in to unmask]>

Fri, 16 Jan 1998 23:38:18 +0800

29 lines

Re: :Electroform Stencil

Jeffery L. Hempton <[log in to unmask]>

Fri, 16 Jan 1998 10:57:34 -0500

44 lines

:Electroform Stencil

MR GEORGE D GREGOIRE <[log in to unmask]>

Sat, 17 Jan 1998 12:01:22 -0500

34 lines

New Thread

<No subject>

<No subject>

1/5/98 9:59 AM

116 lines

<No subject>

lilin <[log in to unmask]>

Tue, 6 Jan 1998 11:43:55 +0800

22 lines

<No subject>

Paul Klasek <[log in to unmask]>

Tue, 6 Jan 1998 17:23:09 +1100

53 lines

<No subject>

Zhang, Jay <[log in to unmask]>

Tue, 6 Jan 1998 08:05:54 -0600

85 lines

<No subject>

COLLINS, GRAHAM <[log in to unmask]>

Tue, 6 Jan 1998 10:11:58 -0500

84 lines

<No subject>

Eddie Brunker <[log in to unmask]>

Tue, 6 Jan 1998 17:37:27 GMT

49 lines

<No subject>

1/6/98 10:39 AM

33 lines

<No subject>

Paul Klasek <[log in to unmask]>

Wed, 7 Jan 1998 08:14:42 +1100

118 lines

<No subject>

Zhang, Jay <[log in to unmask]>

Tue, 6 Jan 1998 16:42:05 -0600

153 lines

<No subject>

Tuesday, January 06, 1998 2:59PM

43 lines

<No subject>

1/6/98 5:02 PM

36 lines

<No subject>

1/6/98 5:02 PM

36 lines

<No subject>

1/6/98 5:09 AM

45 lines

<No subject>

1/7/98 10:26 PM

55 lines

<No subject>

1/7/98 10:56 AM

41 lines

<No subject>

1/7/98 10:27 AM

34 lines

<No subject>

Wed, 7 Jan 1998 10:03:45

36 lines

<No subject>

Thursday, January 08, 1998 10:44AM

43 lines

<No subject>

1/6/98 6:02 PM

38 lines

<No subject>

Fri, 9 Jan 1998 19:21:03 +0100

112 lines

<No subject>

1/12/98 4:52 PM

44 lines

<No subject>

1/11/98 6:55 PM

74 lines

<No subject>

1/12/98 2:14 PM

69 lines

<No subject>

Tuesday, January 13, 1998 6:20PM

64 lines

<No subject>

ras <[log in to unmask]>

Wed, 21 Jan 1998 11:48:05 +0000

31 lines

New Thread

???

???

Sherry Warner <[log in to unmask]>

Wed, 28 Jan 1998 13:41:54 -0500

70 lines

Re: ???

Hamilton, Richard -4454 <[log in to unmask]>

Wed, 28 Jan 1998 11:55:34 -0700

114 lines

Re: ???

Jack Olson <[log in to unmask]>

Wed, 28 Jan 1998 17:52:26 -0800

97 lines

New Thread

Acetone of SMT assemblies

Acetone of SMT assemblies

Chan, Marcelo <[log in to unmask]>

Tue, 27 Jan 1998 15:39:30 -0500

27 lines

Re: Acetone of SMT assemblies

HGross1029 <[log in to unmask]>

Tue, 27 Jan 1998 15:59:23 EST

28 lines

Re: Acetone of SMT assemblies

Sheila Smith <[log in to unmask]>

Tue, 27 Jan 1998 16:01:48 -0500

59 lines

Re: Acetone of SMT assemblies

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:10 EST

44 lines

Re: Acetone of SMT assemblies

Michel Moninger <[log in to unmask]>

Fri, 30 Jan 1998 22:22:46 EST

26 lines

New Thread

ADMIN: IPC's email forums archives

ADMIN: IPC's email forums archives

Dmitriy Sklyar <[log in to unmask]>

Thu, 22 Jan 1998 13:58:09 -0600

73 lines

New Thread

ADMIN: Re: [TN] ???

ADMIN: Re: [TN] ???

Dmitriy Sklyar <[log in to unmask]>

Wed, 28 Jan 1998 13:15:09 -0600

83 lines

New Thread

ADMIN: Test - please ignore

Re: ADMIN: Test - please ignore

Paul Klasek <[log in to unmask]>

Fri, 2 Jan 1998 08:48:17 +1100

56 lines

New Thread

ADMIN:Re: [TN] IPCchat session announcement

ADMIN:Re: [TN] IPCchat session announcement

Dmitriy Sklyar <[log in to unmask]>

Fri, 30 Jan 1998 13:14:40 -0600

55 lines

New Thread

Advanced Printed Circuit Technology Seminar serving New

Re: Advanced Printed Circuit Technology Seminar serving New

TheITMTeam <[log in to unmask]>

Fri, 23 Jan 1998 16:11:58 EST

25 lines

New Thread

Advanced Printed Circuit Technology Seminar serving New England

Advanced Printed Circuit Technology Seminar serving New England

Tom Davis <[log in to unmask]>

Fri, 23 Jan 1998 15:21:05 -0500

56 lines

New Thread

air voids in multi

air voids in multi

Afri Singh <[log in to unmask]>

Thu, 22 Jan 1998 23:39:47 -0500

36 lines

Re: air voids in multi

David Heywood <[log in to unmask]>

Fri, 23 Jan 1998 08:16:53 +0000

68 lines

Re: air voids in multi

Colin <[log in to unmask]>

Fri, 23 Jan 1998 06:06:01 -0600

86 lines

Re: air voids in multi

Tony King <[log in to unmask]>

Fri, 23 Jan 1998 07:54:06 -0800

30 lines

Re: air voids in multi

Colin <[log in to unmask]>

Fri, 23 Jan 1998 08:00:20 -0600

91 lines

Re: air voids in multI

Afri Singh <[log in to unmask]>

Fri, 23 Jan 1998 14:20:19 -0500

30 lines

Re: air voids in multI

Thomas E. Waznis <[log in to unmask]>

Fri, 23 Jan 1998 18:04:12 -0800

35 lines

Re: air voids in multi

Paul Gould <[log in to unmask]>

Sat, 24 Jan 1998 11:13:31 +0000

44 lines

New Thread

air voids in multi -Reply

air voids in multi -Reply

Fred Johnson <[log in to unmask]>

Fri, 23 Jan 1998 14:05:44 +0000

75 lines

New Thread

Ammonia Etchant - Replenisher

Ammonia Etchant - Replenisher

tgyee <[log in to unmask]>

Thu, 22 Jan 1998 09:30:24 PST

36 lines

Re: Ammonia Etchant - Replenisher

AHamil2719 <[log in to unmask]>

Wed, 21 Jan 1998 23:35:59 EST

27 lines

Re: Ammonia Etchant - Replenisher

Eltek Ltd. - Process Engineering <[log in to unmask]>

Thu, 22 Jan 1998 07:49:05 +0200

50 lines

Re: Ammonia Etchant - Replenisher

Ed Uslar <[log in to unmask]>

Thu, 22 Jan 1998 07:48:17 -0500

49 lines

New Thread

Any No Clean Flux for Thick PCB's?

Any No Clean Flux for Thick PCB's?

[log in to unmask]

Mon, 5 Jan 1998 13:54:09 -0500

36 lines

Any No Clean Flux for Thick PCB's?

Evan Jones <[log in to unmask]>

Mon, 5 Jan 1998 19:07:28 -0500

120 lines

Re: Any No Clean Flux for Thick PCB's?

Ryaby, John <[log in to unmask]>

Tue, 6 Jan 1998 14:49:04 -0500

83 lines

Re: Any No Clean Flux for Thick PCB's?

Martin Bourke <[log in to unmask]>

Wed, 7 Jan 1998 00:16:05 -0800

77 lines

New Thread

Asf for Information

Asf for Information

TAUBE ELECTRONIC <[log in to unmask]>

Sat, 10 Jan 1998 13:02:38 +0000

39 lines

New Thread

Assembling backplane PWBs

Assembling backplane PWBs

Chan, Marcelo <[log in to unmask]>

Tue, 20 Jan 1998 14:24:08 -0500

29 lines

New Thread

Assembly

Assembly

Sheppard, Marty - LYPME <[log in to unmask]>

Mon, 26 Jan 1998 13:44:12 -0500

35 lines

New Thread

Assembly - Conformal Coating

Assembly - Conformal Coating

Bob Jacubec <[log in to unmask]>

Fri, 9 Jan 1998 15:58:54 -0600

32 lines

New Thread

Assembly Floor Humidity Requirements

Assembly Floor Humidity Requirements

Juanita Zeinstra <[log in to unmask]>

Fri, 16 Jan 1998 13:30:40 -0500

56 lines

Re: Assembly Floor Humidity Requirements

Tucker, Steve (KS) <[log in to unmask]>

Fri, 16 Jan 1998 12:48:53 -0700

107 lines

Re: Assembly Floor Humidity Requirements

Phillip J. Dudley <[log in to unmask]>

Sun, 18 Jan 1998 12:45:52 -0800

74 lines

Re: Assembly Floor Humidity Requirements

Kathy Palumbo <[log in to unmask]>

Mon, 19 Jan 1998 12:06:24 -0800

113 lines

Re: Assembly Floor Humidity Requirements

David Girard <[log in to unmask]>

Tue, 20 Jan 1998 12:43:46 -0500

106 lines

Re: Assembly Floor Humidity Requirements

Yves Trudell <[log in to unmask]>

Tue, 20 Jan 1998 12:48:00 -0500

135 lines

Re: Assembly Floor Humidity Requirements

Bev Christian <[log in to unmask]>

Tue, 20 Jan 1998 19:32:34 -0500

146 lines

New Thread

Assembly Floor Humidity Requirements -Reply

Assembly Floor Humidity Requirements -Reply

JON MOORE <[log in to unmask]>

Fri, 16 Jan 1998 14:32:33 -0500

80 lines

New Thread

ASSY: Conductive epoxies and radiation exposure

ASSY: Conductive epoxies and radiation exposure

Sheila Smith <[log in to unmask]>

Tue, 27 Jan 1998 09:09:50 -0500

32 lines

Re: ASSY: Conductive epoxies and radiation exposure

Gregg Klawson <[log in to unmask]>

Wed, 28 Jan 1998 10:53:19 -0500

52 lines

Re: ASSY: Conductive epoxies and radiation exposure

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:04 EST

44 lines

New Thread

Assy: Forced Air Convection Ovens

Re: Assy: Forced Air Convection Ovens

Jerry Cupples <[log in to unmask]>

Mon, 12 Jan 1998 10:45:14 -0600

76 lines

Re: Assy: Forced Air Convection Ovens

Douglas H Bennett- Sales Engineer <[log in to unmask]>

Mon, 12 Jan 1998 13:34:40 -0800

57 lines

Re: Assy: Forced Air Convection Ovens

Engelmaier <[log in to unmask]>

Mon, 12 Jan 1998 15:20:31 EST

45 lines

Re: Assy: Forced Air Convection Ovens

David Whalley <[log in to unmask]>

Wed, 14 Jan 1998 12:37:30 +0000

70 lines

New Thread

ASSY: Non-wetting QFPs

ASSY: Non-wetting QFPs

[log in to unmask]

Tue, 20 Jan 1998 08:54:32 -0500

44 lines

New Thread

ASSY: Non-wetting QFPs -Reply

ASSY: Non-wetting QFPs -Reply

JON MOORE <[log in to unmask]>

Tue, 20 Jan 1998 12:55:05 -0500

70 lines

New Thread

Assy: Reflow Oven Card Carriers

Assy: Reflow Oven Card Carriers

[log in to unmask]

Fri, 23 Jan 1998 16:37:55 -0500

34 lines

Re: Assy: Reflow Oven Card Carriers

Steve Schrader <[log in to unmask]>

Fri, 23 Jan 1998 17:14:15 -0500

59 lines

Re: Assy: Reflow Oven Card Carriers

Jeffery L. Hempton <[log in to unmask]>

Mon, 26 Jan 1998 06:31:46 -0500

74 lines

Re: Assy: Reflow Oven Card Carriers

Jeffery L. Hempton <[log in to unmask]>

Fri, 30 Jan 1998 09:30:34 -0500

140 lines

New Thread

Assy: Soldering Terminals

Assy: Soldering Terminals

Jan Satterfield <[log in to unmask]>

Tue, 20 Jan 1998 09:27:50 -0700

26 lines

Re: Assy: Soldering Terminals

Sherry Warner <[log in to unmask]>

Tue, 20 Jan 1998 12:16:46 -0500

75 lines

Re: Assy: Soldering Terminals

Kasprzak, Bill (esd) US <[log in to unmask]>

Thu, 22 Jan 1998 08:01:00 PST

45 lines

Re: Assy: Soldering Terminals

Howard Feldmesser <[log in to unmask]>

Thu, 22 Jan 1998 08:52:18 -0500

92 lines

Re: Assy: Soldering Terminals

Jim Marsico 516-595-5879 <[log in to unmask]>

Thu, 22 Jan 1998 09:51:00 -0400

28 lines

Re: Assy: Soldering Terminals

Sherry Warner <[log in to unmask]>

Wed, 28 Jan 1998 13:04:12 -0500

131 lines

New Thread

Assy:Min distance between vias in wavesoldering

Assy:Min distance between vias in wavesoldering

Johannes Sivula <[log in to unmask]>

Mon, 12 Jan 1998 16:52:08 +0200

34 lines

Re: Assy:Min distance between vias in wavesoldering

Mark Bailey. <[log in to unmask]>

Mon, 12 Jan 1998 10:14:03 -0500

41 lines

Re: Assy:Min distance between vias in wavesoldering

Aric J Parr <[log in to unmask]>

Mon, 12 Jan 1998 10:59:03 -0500

26 lines

New Thread

Au/Pd/Ni Board finish

Au/Pd/Ni Board finish

Rod Martens <[log in to unmask]>

Mon, 26 Jan 1998 12:27:24 -0700

30 lines

Re: Au/Pd/Ni Board finish

Phillip E. Hinton <[log in to unmask]>

Mon, 26 Jan 1998 15:48:39 EST

61 lines

New Thread

Automated Notification of New Document Releases

Automated Notification of New Document Releases

Jack Crawford <[log in to unmask]>

Tue, 6 Jan 1998 11:27:42 -0600

72 lines

New Thread

Automated wirebond verification machine

Automated wirebond verification machine

Ducas,Patrick <[log in to unmask]>

Wed, 28 Jan 1998 14:43:00 -0500

28 lines

Re: Automated wirebond verification machine

[log in to unmask]

Thu, 29 Jan 1998 06:31:31 -0500

28 lines

Re: Automated wirebond verification machine

Chan, Marcelo <[log in to unmask]>

Thu, 29 Jan 1998 08:36:16 -0500

59 lines

New Thread

BGA reballing, Reply to.

BGA reballing, Reply to.

Michael Alderete Netscape mail <[log in to unmask]>

Thu, 8 Jan 1998 07:26:42 -0800

26 lines

New Thread

BGA Reballing.

BGA Reballing.

Oscar Monarrez <[log in to unmask]>

Tue, 6 Jan 1998 18:02:53 -0500

27 lines

Re: BGA Reballing.

David D Hillman <[log in to unmask]>

Wed, 7 Jan 1998 06:32:20 -0600

63 lines

Re: BGA Reballing.

Linda Bookman <[log in to unmask]>

Wed, 7 Jan 1998 11:55:25 -0800

51 lines

BGA Reballing.

Oscar Monarrez <[log in to unmask]>

Tue, 6 Jan 1998 18:02:53 -0500

15 lines

Re: BGA Reballing.

Krug,Richard <[log in to unmask]>

Fri, 9 Jan 1998 13:44:00 -0500

27 lines

New Thread

BGA Reballing. -Reply

BGA Reballing. -Reply

Christy Graham <[log in to unmask]>

Tue, 6 Jan 1998 15:33:18 -0800

33 lines

BGA Reballing. -Reply

Christy Graham <[log in to unmask]>

Tue, 6 Jan 1998 15:33:18 -0800

32 lines

New Thread

BGA reflow oven profile?

BGA reflow oven profile?

Stammely, Tim <[log in to unmask]>

Mon, 26 Jan 1998 16:56:27 -0500

30 lines

Re: BGA reflow oven profile?

John Guy <[log in to unmask]>

Mon, 26 Jan 1998 17:16:11 -0500

66 lines

Re: BGA reflow oven profile?

Jerry Cupples <[log in to unmask]>

Mon, 26 Jan 1998 17:14:05 -0600

48 lines

Re: BGA reflow oven profile?

Douglas H Bennett- Sales Engineer <[log in to unmask]>

Tue, 27 Jan 1998 10:44:16 -0800

71 lines

Re: BGA reflow oven profile?

Brad Kendall <[log in to unmask]>

Tue, 27 Jan 1998 10:48:11 -0500

40 lines

New Thread

BGA reflow time

BGA reflow time

Chan, Marcelo <[log in to unmask]>

Tue, 27 Jan 1998 16:30:01 -0500

34 lines

Re: BGA reflow time

Eddie Brunker <[log in to unmask]>

Wed, 28 Jan 1998 11:18:18 GMT

82 lines

New Thread

BGA Rework Site Dressing

BGA Rework Site Dressing

Charles Elliott <[log in to unmask]>

Thu, 22 Jan 1998 08:53:14 -0500

44 lines

Re: BGA Rework Site Dressing

Chan, Marcelo <[log in to unmask]>

Thu, 22 Jan 1998 10:05:24 -0500

85 lines

New Thread

BGA SPECS

BGA SPECS

Jose Bequis <[log in to unmask]>

Fri, 9 Jan 1998 14:33:25 -0500

45 lines

New Thread

Black Oxide

Black Oxide

Eltek Ltd. - Process Engineering <[log in to unmask]>

Tue, 20 Jan 1998 08:10:58 +0200

42 lines

Re: Black Oxide

Mark Mazzoli <[log in to unmask]>

Tue, 20 Jan 1998 07:47:54 -0500

109 lines

Re: Black Oxide

RSedlak <[log in to unmask]>

Tue, 20 Jan 1998 09:19:53 EST

59 lines

New Thread

Board Specification

Board Specification

HGross1029 <[log in to unmask]>

Tue, 20 Jan 1998 15:19:22 EST

29 lines

Re: Board Specification

Jack Crawford <[log in to unmask]>

Mon, 26 Jan 1998 15:24:15 -0600

68 lines

New Thread

Bob Willis Details

Bob Willis Details

Bob Willis <[log in to unmask]>

Sat, 24 Jan 1998 17:45:21 -0000

34 lines

New Thread

Bob Willis e-mail!!

Bob Willis e-mail!!

Chan, Marcelo <[log in to unmask]>

Wed, 21 Jan 1998 11:48:07 -0500

27 lines

Re: Bob Willis e-mail!!

Joseph Fjelstad <[log in to unmask]>

Wed, 21 Jan 1998 09:04:19 -0800

53 lines

New Thread

Bonded PCB Stiffeners

Bonded PCB Stiffeners

Peroutka, Gregg W. <[log in to unmask]>

Thu, 22 Jan 1998 10:37:02 -0600

51 lines

New Thread

BT resin etching condition

BT resin etching condition

[log in to unmask]

Wed, 21 Jan 1998 15:47:43 +0900

43 lines

Re: BT resin etching condition

Henry Coulter <[log in to unmask]>

Wed, 21 Jan 1998 07:04:23 -0700

24 lines

New Thread

BT resin etching condition (II)

BT resin etching condition (II)

[log in to unmask]

Wed, 21 Jan 1998 18:49:07 +0900

31 lines

New Thread

BuCu for flex circuits

BuCu for flex circuits

David Tyler <[log in to unmask]>

Mon, 19 Jan 1998 14:19:54 -0500

30 lines

Re: BuCu for flex circuits

Marc Strickland <[log in to unmask]>

Mon, 19 Jan 1998 20:02:04 -0800

45 lines

Re: BuCu for flex circuits

David D Hillman <[log in to unmask]>

Tue, 20 Jan 1998 05:38:27 -0600

69 lines

New Thread

BuCu for flex circuits -Reply

Re: BuCu for flex circuits -Reply

rsheldon <[log in to unmask]>

Mon, 19 Jan 1998 12:35:04 -0800

76 lines

New Thread

BURR

BURR

Padmanabha Anandapuram Halappa <[log in to unmask]>

Fri, 16 Jan 1998 12:39:05 EST

36 lines

Re: BURR

Joseph E. J. Duclos Jr. <[log in to unmask]>

Fri, 16 Jan 1998 04:54:25 -0500

188 lines

Re: BURR

Keith Larson <[log in to unmask]>

Fri, 16 Jan 1998 08:10:29 -0600

264 lines

Re: BURR

Steve Collins <[log in to unmask]>

Fri, 16 Jan 1998 07:32:56 -0700

69 lines

Re: BURR

Mark Simmons <[log in to unmask]>

Fri, 16 Jan 1998 07:28:40 -0800

65 lines

Re: BURR

Steve Horvath <[log in to unmask]>

Fri, 16 Jan 1998 10:04:29 -0600

75 lines

Re: BURR

CSS International Corp. <[log in to unmask]>

Fri, 16 Jan 1998 20:53:57 +0000

91 lines

Re: BURR

[log in to unmask]

Sat, 17 Jan 1998 14:35:01 -0600

93 lines

Re: BURR

Don Vischulis <[log in to unmask]>

Fri, 16 Jan 1998 21:56:11 -0600

56 lines

Re: BURR

Steve Collins <[log in to unmask]>

Mon, 19 Jan 1998 07:17:39 -0700

130 lines

New Thread

Burrs on FETs

Burrs on FETs

Joe Wackerman <[log in to unmask]>

Fri, 9 Jan 1998 15:27:13 -0800

37 lines

Re: Burrs on FETs

john balchunas <[log in to unmask]>

Sat, 10 Jan 1998 09:42:16 -0500

51 lines

Re: Burrs on FETs

Gregg Klawson <[log in to unmask]>

Sun, 11 Jan 1998 22:04:48 -0500

37 lines

New Thread

Calculation formulae for diff. striplines

Re: Calculation formulae for diff. striplines

Gwen Merchant <[log in to unmask]>

Wed, 21 Jan 1998 11:54:04 +0000

106 lines

New Thread

Call for papers Joint European Conference VII

Call for papers Joint European Conference VII

David Bergman <[log in to unmask]>

Wed, 21 Jan 1998 15:42:10 -0600

382 lines

Re: Call for papers Joint European Conference VII

[log in to unmask]

Wed, 21 Jan 1998 14:30:46 -0800

430 lines

New Thread

CAM Software info.

CAM Software info.

Stammely, Tim <[log in to unmask]>

Mon, 26 Jan 1998 09:02:06 -0500

46 lines

Re: CAM Software info.

Wolfgang Schenke <[log in to unmask]>

Mon, 26 Jan 1998 08:58:32 -0800

76 lines

New Thread

Camelot's Gemini paste dispensing

Camelot's Gemini paste dispensing

Paul Klasek <[log in to unmask]>

Fri, 16 Jan 1998 09:06:20 +1100

29 lines

New Thread

Camtek AOI -Reply

Camtek AOI -Reply

Fred Johnson <[log in to unmask]>

Mon, 19 Jan 1998 22:49:33 +0000

55 lines

New Thread

Carbon ink contacts

Carbon ink contacts

Alan Shaw <[log in to unmask]>

Thu, 8 Jan 1998 12:13:23 -0500

47 lines

New Thread

Chinese Character Sets

Re: Chinese Character Sets

JB <[log in to unmask]>

Wed, 7 Jan 1998 11:04:24 +0800

204 lines

New Thread

Class 3 & No Clean Flux

Class 3 & No Clean Flux

Joe Wackerman <[log in to unmask]>

Fri, 23 Jan 1998 15:58:04 -0800

33 lines

Re: Class 3 & No Clean Flux

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:37:51 EST

40 lines

New Thread

CMP Equipment/Process related forum

Re: CMP Equipment/Process related forum

[log in to unmask]

Fri, 30 Jan 1998 10:40:02 +0900

31 lines

Re: CMP Equipment/Process related forum

Steven C. Pelayo <[log in to unmask]>

Thu, 29 Jan 1998 18:44:36 -0800

50 lines

New Thread

Cold Solder and Solder Shorts

Cold Solder and Solder Shorts

Krishna Kalyan <[log in to unmask]>

Thu, 8 Jan 1998 17:13:38 PST

32 lines

Re: Cold Solder and Solder Shorts

john balchunas <[log in to unmask]>

Fri, 9 Jan 1998 06:48:04 -0500

48 lines

New Thread

Colight 1630

Colight 1630

Don Cardoza <[log in to unmask]>

Wed, 21 Jan 1998 07:31:35 -0800

24 lines

Re: Colight 1630

Rodney <[log in to unmask]>

Thu, 22 Jan 1998 10:29:02 -0600

47 lines

New Thread

Conformal coating

Conformal coating

Jacob Mozel <[log in to unmask]>

Wed, 28 Jan 1998 14:40:08 +0200

38 lines

Re: Conformal coating

Jim Marsico 516-595-5879 <[log in to unmask]>

Wed, 28 Jan 1998 08:07:00 -0400

48 lines

Re: Conformal coating

Graham Naisbitt <[log in to unmask]>

Wed, 28 Jan 1998 21:43:00 -0000

86 lines

Re: Conformal coating

Case, Jeff <[log in to unmask]>

Thu, 29 Jan 1998 14:47:00 -0700

51 lines

Re: Conformal coating

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:20 EST

71 lines

New Thread

Conformal coating -Reply

Re: Conformal coating -Reply

JON MOORE <[log in to unmask]>

Thu, 29 Jan 1998 10:27:33 -0500

77 lines

New Thread

CONFORMAL COATINGS ON PCBS

CONFORMAL COATINGS ON PCBS

Jim Hedderick <[log in to unmask]>

Mon, 19 Jan 1998 16:16:04 +0000

35 lines

Re: CONFORMAL COATINGS ON PCBS

Blanchet,Richard <[log in to unmask]>

Mon, 19 Jan 1998 12:25:00 -0500

78 lines

Re: CONFORMAL COATINGS ON PCBS

Darryl Small <[log in to unmask]>

Mon, 19 Jan 1998 14:37:27 -0400

82 lines

Re: CONFORMAL COATINGS ON PCBS

Graham Naisbitt <[log in to unmask]>

Mon, 19 Jan 1998 23:37:30 -0000

120 lines

New Thread

Convection Oven Selection

Convection Oven Selection

Kathy Palumbo <[log in to unmask]>

Wed, 14 Jan 1998 16:50:48 -0800

46 lines

New Thread

Copper Pattern Plating Line Improvements

Copper Pattern Plating Line Improvements

Phil Dam <[log in to unmask]>

Wed, 14 Jan 1998 16:19:13 EST

28 lines

New Thread

Copper Pattern Plating Line Improvements -Reply

Copper Pattern Plating Line Improvements -Reply

Fred Johnson <[log in to unmask]>

Thu, 15 Jan 1998 15:04:49 +0000

83 lines

New Thread

copper plane clearance

copper plane clearance

Ziarek, Paul J <[log in to unmask]>

Wed, 14 Jan 1998 16:14:44 -0600

33 lines

Re: copper plane clearance

Lyle Dove <[log in to unmask]>

Wed, 14 Jan 1998 18:30:48 -0600

45 lines

Re: copper plane clearance

Andy Kowalewski <[log in to unmask]>

Thu, 15 Jan 1998 13:57:21 +1100

63 lines

New Thread

Crack detection under BGA?

Re: Crack detection under BGA?

Paul Klasek <[log in to unmask]>

Fri, 2 Jan 1998 08:47:15 +1100

68 lines

Re: Crack detection under BGA?

Gregg Klawson <[log in to unmask]>

Thu, 1 Jan 1998 22:18:05 -0500

65 lines

Re: Crack detection under BGA?

Engelmaier <[log in to unmask]>

Fri, 2 Jan 1998 09:10:07 EST

36 lines

Re: Crack detection under BGA?

Engelmaier <[log in to unmask]>

Fri, 2 Jan 1998 09:10:02 EST

41 lines

Re: Crack detection under BGA?

David D Hillman <[log in to unmask]>

Mon, 5 Jan 1998 10:59:32 -0600

109 lines

Re: Crack detection under BGA?

Rod Martens <[log in to unmask]>

Mon, 5 Jan 1998 13:16:22 -0700

36 lines

New Thread

Cracked Vias

Cracked Vias

MICHAEL DODSON <[log in to unmask]>

Wed, 7 Jan 1998 10:03:44 +0000

43 lines

Re: Cracked Vias

Ed Cosper <[log in to unmask]>

Wed, 7 Jan 1998 13:03:16 -0600

94 lines

Re: Cracked Vias

HGross1029 <[log in to unmask]>

Wed, 7 Jan 1998 14:04:56 EST

34 lines

Re: Cracked Vias

MICHAEL DODSON <[log in to unmask]>

Wed, 7 Jan 1998 11:25:06 +0000

33 lines

Re: Cracked Vias

Charles Desroches <[log in to unmask]>

Wed, 7 Jan 1998 14:38:44 -0500

116 lines

Re: Cracked Vias

Engelmaier <[log in to unmask]>

Thu, 8 Jan 1998 00:16:49 EST

42 lines

New Thread

current density of large pads

current density of large pads

Charlie Rock <[log in to unmask]>

Mon, 19 Jan 1998 18:32:09 -0700

36 lines

New Thread

CuSn Intermetallic growth

Re: CuSn Intermetallic growth

David D Hillman <[log in to unmask]>

Mon, 5 Jan 1998 08:36:09 -0600

73 lines

New Thread

Dead Pad Removal

Dead Pad Removal

David Backen <[log in to unmask]>

Fri, 16 Jan 1998 13:18:10 -0500

32 lines

Re: Dead Pad Removal

Per Viklund <[log in to unmask]>

Mon, 19 Jan 1998 08:48:24 +0100

67 lines

Re: Dead Pad Removal

Engelmaier <[log in to unmask]>

Mon, 19 Jan 1998 11:54:22 EST

69 lines

Re: Dead Pad Removal

Alan Cochrane <[log in to unmask]>

Tue, 20 Jan 1998 11:23:38 -0800

57 lines

Re: Dead Pad Removal

Ed Cosper <[log in to unmask]>

Tue, 20 Jan 1998 15:27:52 -0600

118 lines

Re: Dead Pad Removal

D. Rooke <[log in to unmask]>

Wed, 21 Jan 1998 00:53:48 -0500

142 lines

New Thread

Dead Pad Removal -Reply

Re: Dead Pad Removal -Reply

Larry Campbell <[log in to unmask]>

Mon, 19 Jan 1998 09:48:51 -0500

117 lines

Re: Dead Pad Removal -Reply

bill birch <[log in to unmask]>

Tue, 20 Jan 1998 12:52:35 -0800

91 lines

New Thread

Des: Thermal relief on gnd/pwr planes

Des: Thermal relief on gnd/pwr planes

Raymond Klein <[log in to unmask]>

Wed, 14 Jan 1998 11:56:42 -0800

37 lines

Re: Des: Thermal relief on gnd/pwr planes

Jerry Cupples <[log in to unmask]>

Wed, 14 Jan 1998 17:42:46 -0600

88 lines

New Thread

Design Complexity

Design Complexity

Nick Guerra <[log in to unmask]>

Tue, 13 Jan 1998 14:34:18 -0600

34 lines

Re: Design Complexity

Jana Carraway <[log in to unmask]>

Tue, 13 Jan 1998 13:06:23 PST

67 lines

Re: Design Complexity

Mike Bailey <[log in to unmask]>

Tue, 13 Jan 1998 13:50:27 -0500

31 lines

Re: Design Complexity

DAVID C WEBER <[log in to unmask]>

Tue, 13 Jan 1998 19:20:27 -0500

58 lines

Re: Design Complexity

Doug McKean <[log in to unmask]>

Tue, 13 Jan 1998 19:44:16 -0500

100 lines

Re: Design Complexity

mike lydon <[log in to unmask]>

Thu, 15 Jan 1998 18:30:47 -0800

89 lines

New Thread

Design for Manufacturing

Design for Manufacturing

[log in to unmask]

Fri, 23 Jan 1998 15:42:18 -0600

56 lines

Re: Design for Manufacturing

Stammely, Tim <[log in to unmask]>

Mon, 26 Jan 1998 08:24:38 -0500

79 lines

New Thread

Design for Manufacturing -Reply

Design for Manufacturing -Reply

Matthew Park <[log in to unmask]>

Fri, 23 Jan 1998 14:30:26 -0800

91 lines

New Thread

Design Requirements

Design Requirements

Phil Nutting <[log in to unmask]>

Mon, 12 Jan 1998 15:37:47 -0800

27 lines

New Thread

Detached QFP.

Detached QFP.

Poh Kong Hui <[log in to unmask]>

Sun, 25 Jan 1998 23:59:30 +0800

32 lines

Re: Detached QFP.

Werner Engelmaier <[log in to unmask]>

Mon, 26 Jan 1998 12:09:57 EST

36 lines

New Thread

DFX - Design for Excellence

DFX - Design for Excellence

Moss Dore <[log in to unmask]>

Wed, 28 Jan 1998 09:14:11 +0000

26 lines

Re: DFX - Design for Excellence

Engelmaier <[log in to unmask]>

Wed, 28 Jan 1998 15:10:25 EST

33 lines

New Thread

DIMMS Card Assemblies

DIMMS Card Assemblies

Kelly Kovalovsky <[log in to unmask]>

Thu, 22 Jan 1998 03:58:21 -0500

30 lines

New Thread

Drills

Drills

drilbert <[log in to unmask]>

Fri, 16 Jan 1998 08:35:58 -0800

29 lines

Re: Drills

KJohans189 <[log in to unmask]>

Fri, 16 Jan 1998 11:59:49 EST

24 lines

Re: Drills

Phil Dam <[log in to unmask]>

Fri, 16 Jan 1998 15:08:33 EST

22 lines

New Thread

Dynapert technician

Dynapert technician

Edward J Popielarski <[log in to unmask]>

Tue, 20 Jan 1998 16:36:23 -0600

29 lines

New Thread

EKRA screen and stencil printing machines

EKRA screen and stencil printing machines

Dougal Stewart <[log in to unmask]>

Tue, 13 Jan 1998 16:03:51 -0000

36 lines

New Thread

Electroless tin

Electroless tin

Bogdan Gaby <[log in to unmask]>

Mon, 12 Jan 1998 17:22:56 -0800

31 lines

New Thread

Employment opps

Employment opps

Hugh Scott Miller <[log in to unmask]>

Sat, 24 Jan 1998 03:51:09 -0500

46 lines

Re: Employment opps

Jack Crawford <[log in to unmask]>

Mon, 26 Jan 1998 10:18:34 -0600

84 lines

New Thread

Entek boards / In Circuit Testing problems

Entek boards / In Circuit Testing problems

Wolfgang Erat <[log in to unmask]>

Tue, 6 Jan 1998 17:02:54 -0500

28 lines

Re: Entek boards / In Circuit Testing problems

[log in to unmask]

Tue, 6 Jan 1998 14:57:03 -0800

31 lines

Re: Entek boards / In Circuit Testing problems

Jerry Cupples <[log in to unmask]>

Tue, 6 Jan 1998 17:19:21 -0600

52 lines

Re: Entek boards / In Circuit Testing problems

David D Hillman <[log in to unmask]>

Tue, 6 Jan 1998 17:16:48 -0600

72 lines

Re: Entek boards / In Circuit Testing problems

[log in to unmask]

Wed, 7 Jan 1998 17:15:40 -0600

46 lines

Re: Entek boards / In Circuit Testing problems

Yves Trudell <[log in to unmask]>

Wed, 7 Jan 1998 10:34:06 -0500

120 lines

New Thread

F&K & ASM equipment feedback

F&K & ASM equipment feedback

Jeff Wold <[log in to unmask]>

Thu, 22 Jan 1998 16:29:52 -0600

40 lines

New Thread

FAB: BeCu for flex circuits

FAB: BeCu for flex circuits

Andy Magee <[log in to unmask]>

Tue, 20 Jan 1998 14:03:56 -0500

46 lines

New Thread

Fab: Dishdowns?

Fab: Dishdowns?

sam mccorkel <[log in to unmask]>

Tue, 6 Jan 1998 12:25:53 -0500

36 lines

Re: Fab: Dishdowns?

[log in to unmask]

Wed, 7 Jan 1998 15:49:44 -0800

60 lines

New Thread

Fab: Dishdowns? -Reply

Fab: Dishdowns? -Reply

Ron Hayashi <[log in to unmask]>

Tue, 6 Jan 1998 09:50:02 -0800

30 lines

New Thread

FAB: HASL vs. anything else

FAB: HASL vs. anything else

Sheila Smith <[log in to unmask]>

Fri, 23 Jan 1998 16:27:56 -0500

26 lines

Re: FAB: HASL vs. anything else

Brad Kendall <[log in to unmask]>

Fri, 23 Jan 1998 16:01:51 -0500

29 lines

Re: FAB: HASL vs. anything else

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:37:46 EST

28 lines

New Thread

FAB: HASL vs. anything else -Reply

FAB: HASL vs. anything else -Reply

Matthew Park <[log in to unmask]>

Fri, 23 Jan 1998 14:14:34 -0800

54 lines

FAB: HASL vs. anything else -Reply

Allan Kerr <[log in to unmask]>

Fri, 23 Jan 1998 17:16:23 -0500

52 lines

Re: FAB: HASL vs. anything else -Reply

Ken Patel <[log in to unmask]>

Mon, 26 Jan 1998 15:25:43 -0800

84 lines

New Thread

FAB: HASL vs. anything else -Reply -Reply

Re: FAB: HASL vs. anything else -Reply -Reply

Allan Kerr <[log in to unmask]>

Tue, 27 Jan 1998 08:46:20 -0500

98 lines

Re: FAB: HASL vs. anything else -Reply -Reply

JON MOORE <[log in to unmask]>

Tue, 27 Jan 1998 08:58:15 -0500

111 lines

Re: FAB: HASL vs. anything else -Reply -Reply

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:30 EST

47 lines

Re: FAB: HASL vs. anything else -Reply -Reply

Karen Tellefsen <[log in to unmask]>

Fri, 30 Jan 1998 17:27:07 -0500

78 lines

New Thread

FAB: HASL vs. Flubber

Re: FAB: HASL vs. Flubber

Mark Simmons <[log in to unmask]>

Fri, 23 Jan 1998 19:22:35 -0800

62 lines

Re: FAB: HASL vs. Flubber

Karen Tellefsen <[log in to unmask]>

Sat, 24 Jan 1998 10:12:25 -0800

57 lines

New Thread

FAB: HASL vs. Flubber -Reply

Re: FAB: HASL vs. Flubber -Reply

JON MOORE <[log in to unmask]>

Mon, 26 Jan 1998 10:33:05 -0500

67 lines

New Thread

FAB: Horizontal electroplating line

FAB: Horizontal electroplating line

Orna and Yehuda <[log in to unmask]>

Fri, 9 Jan 1998 21:35:50 +0200

40 lines

New Thread

FAB: Peroxide Microetch Degreasers

FAB: Peroxide Microetch Degreasers

J. Warhelere <[log in to unmask]>

Wed, 7 Jan 1998 18:34:59 -0500

37 lines

Re: FAB: Peroxide Microetch Degreasers

Michael Carano <[log in to unmask]>

Wed, 7 Jan 1998 21:19:15 -0800

60 lines

Re: FAB: Peroxide Microetch Degreasers

RSedlak <[log in to unmask]>

Thu, 8 Jan 1998 06:09:57 EST

33 lines

New Thread

FAB: Pure Gold Process

FAB: Pure Gold Process

John Parsons <[log in to unmask]>

Wed, 28 Jan 1998 12:13:55 +0000

33 lines

Re: FAB: Pure Gold Process

craig sutton <[log in to unmask]>

Wed, 28 Jan 1998 22:23:46 -0800

59 lines

New Thread

fab:B24 board connector

fab:B24 board connector

GaryF40 <[log in to unmask]>

Wed, 7 Jan 1998 15:44:44 EST

40 lines

Re: fab:B24 board connector

SIRGuru <[log in to unmask]>

Thu, 8 Jan 1998 09:44:01 EST

37 lines

New Thread

File format for Shinkawa wire bonders?

File format for Shinkawa wire bonders?

Per Viklund <[log in to unmask]>

Tue, 6 Jan 1998 12:09:44 +0100

35 lines

New Thread

filling the copper

filling the copper

[log in to unmask]

Wed, 7 Jan 1998 22:56:12 -0800

29 lines

Re: filling the copper

Steve Underwood <[log in to unmask]>

Wed, 7 Jan 1998 23:58:33 -0700

29 lines

New Thread

Finding shorts & opens inside PWB's

Finding shorts & opens inside PWB's

Dave Kleinman <[log in to unmask]>

Thu, 22 Jan 1998 13:54:34 -0800

33 lines

Re: Finding shorts & opens inside PWB's

Rod Martens <[log in to unmask]>

Thu, 22 Jan 1998 14:49:16 -0700

67 lines

Re: Finding shorts & opens inside PWB's

SteveZeva <[log in to unmask]>

Thu, 22 Jan 1998 16:10:39 EST

65 lines

Re: Finding shorts & opens inside PWB's

Jim Herard <[log in to unmask]>

Thu, 22 Jan 1998 18:35:47 -0500

81 lines

Re: Finding shorts & opens inside PWB's

Edward J Popielarski <[log in to unmask]>

Fri, 23 Jan 1998 11:45:15 -0600

74 lines

Re: Finding shorts & opens inside PWB's

Andy Kowalewski <[log in to unmask]>

Tue, 27 Jan 1998 06:55:10 +1100

48 lines

New Thread

Flip Chip

Flip Chip

Engineering / Design Dept. <[log in to unmask]>

Tue, 20 Jan 1998 12:54:46 -0800

50 lines

Re: Flip Chip

Rod Martens <[log in to unmask]>

Thu, 22 Jan 1998 14:35:29 -0700

82 lines

Re: Flip Chip

Engineering / Design Dept. <[log in to unmask]>

Thu, 22 Jan 1998 15:50:32 -0800

74 lines

New Thread

Flux Corrosivity

Re: Flux Corrosivity

Paul Klasek <[log in to unmask]>

Fri, 2 Jan 1998 08:06:48 +1100

67 lines

Re: Flux Corrosivity

Nicholas Kane <[log in to unmask]>

Fri, 2 Jan 1998 08:49:59 +1100

104 lines

New Thread

Flux Evaluation-reply

Flux Evaluation-reply

Paul Gould <[log in to unmask]>

Sun, 4 Jan 1998 14:06:46 +0000

72 lines

Re: Flux Evaluation-reply

Alan Kreplick <[log in to unmask]>

Mon, 5 Jan 1998 07:45:45 -0500

30 lines

New Thread

FOOTPRINTS

FOOTPRINTS

Chris Johnston <[log in to unmask]>

Fri, 9 Jan 1998 12:15:15 +1100

46 lines

Re: FOOTPRINTS

E.A. Speer <[log in to unmask]>

Fri, 9 Jan 1998 06:55:26 -0500

91 lines

Re: FOOTPRINTS

E.A. Speer <[log in to unmask]>

Fri, 9 Jan 1998 12:58:23 -0500

94 lines

New Thread

Forced Air Convection Ovens

Forced Air Convection Ovens

Kathy Palumbo <[log in to unmask]>

Thu, 8 Jan 1998 10:44:02 -0800

36 lines

Re: Forced Air Convection Ovens

Hamilton, Richard -4454 <[log in to unmask]>

Thu, 8 Jan 1998 12:35:42 -0700

72 lines

Re: Forced Air Convection Ovens

Ron Hollandsworth <[log in to unmask]>

Thu, 8 Jan 1998 15:40:51 -0500

27 lines

Re: Forced Air Convection Ovens

Thomas C Han <[log in to unmask]>

Thu, 8 Jan 1998 13:15:24 -0800

65 lines

Re: Forced Air Convection Ovens

Martin Bourke <[log in to unmask]>

Fri, 9 Jan 1998 01:51:28 -0800

89 lines

Re: Forced Air Convection Ovens

Eddie Brunker <[log in to unmask]>

Fri, 9 Jan 1998 10:05:19 GMT

74 lines

Re: Forced Air Convection Ovens

TAUBE ELECTRONIC <[log in to unmask]>

Fri, 9 Jan 1998 14:21:31 +0000

43 lines

Re: Forced Air Convection Ovens

Engelmaier <[log in to unmask]>

Fri, 9 Jan 1998 09:04:38 EST

44 lines

Re: Forced Air Convection Ovens

Marc Strickland <[log in to unmask]>

Fri, 9 Jan 1998 08:03:42 -0800

28 lines

Re: Forced Air Convection Ovens

Brad Kendall <[log in to unmask]>

Fri, 9 Jan 1998 15:10:27 -0500

46 lines

Re: Forced Air Convection Ovens

Douglas H Bennett- Sales Engineer <[log in to unmask]>

Mon, 12 Jan 1998 10:15:01 -0800

93 lines

Re: Forced Air Convection Ovens

Ed Holton <[log in to unmask]>

Mon, 12 Jan 1998 10:56:07 -0500

93 lines

New Thread

FR4 Laminate

FR4 Laminate

Boris Cheung / Crowntek Ltd. <[log in to unmask]>

Tue, 27 Jan 1998 09:58:21 +0800

110 lines

Re: FR4 Laminate

JB <[log in to unmask]>

Tue, 27 Jan 1998 11:02:51 +0800

91 lines

New Thread

FR4 Laminate details

FR4 Laminate details

BPL- PCB, Doddaballapur <[log in to unmask]>

Fri, 23 Jan 1998 17:55:35 +0500

34 lines

FR4 Laminate details

Info Center <[log in to unmask]>

Sat, 24 Jan 1998 08:49:58 +0800

64 lines

Re: FR4 Laminate details

Wes Smith <[log in to unmask]>

Sat, 24 Jan 1998 18:19:18 +1100

111 lines

FR4 Laminate details

Info Center <[log in to unmask]>

Sun, 25 Jan 1998 00:27:04 +0800

36 lines

Re: FR4 Laminate details

Paul Klasek <[log in to unmask]>

Tue, 27 Jan 1998 08:16:02 +1100

67 lines

New Thread

FR4 Laminate details (in India...)

Re: FR4 Laminate details (in India...)

JB <[log in to unmask]>

Tue, 27 Jan 1998 10:04:12 +0800

42 lines

New Thread

FSL

FSL

JSSallo <[log in to unmask]>

Tue, 6 Jan 1998 13:28:40 EST

25 lines

Re: FSL

Joel Fillion <[log in to unmask]>

Tue, 6 Jan 1998 11:22:00 -0800

48 lines

Re: FSL

fgolisan <[log in to unmask]>

Tue, 6 Jan 1998 11:26:47 PST

22 lines

New Thread

FW: SM'97 Presentation Material

FW: SM'97 Presentation Material

Paul Klasek <[log in to unmask]>

Thu, 8 Jan 1998 08:38:40 +1100

149 lines

New Thread

Fw: [DC] Question on Plated holes

Fw: [DC] Question on Plated holes

Stephen Corke <[log in to unmask]>

Thu, 8 Jan 1998 16:14:17 -0500

35 lines

New Thread

FW: [TN] Acetone of SMT assemblies

FW: [TN] Acetone of SMT assemblies

Dhawan, Ashok <[log in to unmask]>

Tue, 27 Jan 1998 15:23:03 -0600

58 lines

New Thread

FW: [TN] BGA Coplanarity

FW: [TN] BGA Coplanarity

Dhawan, Ashok <[log in to unmask]>

Fri, 2 Jan 1998 16:09:16 -0700

100 lines

Re: FW: [TN] BGA Coplanarity

BPL Ltd. <[log in to unmask]>

Sat, 3 Jan 1998 16:18:07 +0530

24 lines

New Thread

FW: [TN] BURR

FW: [TN] BURR

Dhawan, Ashok <[log in to unmask]>

Mon, 19 Jan 1998 07:43:39 -0700

174 lines

New Thread

FW: [TN] Flux Evaluation

FW: [TN] Flux Evaluation

Dhawan, Ashok <[log in to unmask]>

Fri, 2 Jan 1998 16:12:54 -0700

67 lines

New Thread

FW: [TN] Forced Air Convection Ovens

FW: [TN] Forced Air Convection Ovens

Blanchet,Richard <[log in to unmask]>

Thu, 8 Jan 1998 14:18:00 -0500

21 lines

New Thread

FW: [TN] Need a test lab for IC failure analysis

FW: [TN] Need a test lab for IC failure analysis

Paul Terranova <[log in to unmask]>

Mon, 5 Jan 1998 17:12:57 -0500

62 lines

New Thread

FW: [TN] Steve McBride [TN] Design for Manufacturing

FW: [TN] Steve McBride [TN] Design for Manufacturing

Dhawan, Ashok <[log in to unmask]>

Tue, 27 Jan 1998 14:19:53 -0600

159 lines

Re: FW: [TN] Steve McBride [TN] Design for Manufacturing

Hamilton, Richard -4454 <[log in to unmask]>

Tue, 27 Jan 1998 14:05:38 -0700

209 lines

New Thread

Fw: [TN] What is gerber & what format is good....

Fw: [TN] What is gerber & what format is good....

Dave Roesler <[log in to unmask]>

Thu, 8 Jan 1998 15:41:27 -0600

93 lines

New Thread

GDS2

GDS2

[log in to unmask]

Wed, 14 Jan 1998 10:12:23 +0000

27 lines

New Thread

GEN: Comparison Study

GEN: Comparison Study

Jan Satterfield <[log in to unmask]>

Thu, 29 Jan 1998 15:12:33 -0700

31 lines

New Thread

GEN: Where to get: Conformal coating

GEN: Where to get: Conformal coating

Lars Ladefoged Holm <[log in to unmask]>

Wed, 14 Jan 1998 15:24:36 +0000

38 lines

New Thread

Gold Flash benefits over HAL

Gold Flash benefits over HAL

Alan Shaw <[log in to unmask]>

Wed, 7 Jan 1998 10:56:07 -0500

34 lines

Re: Gold Flash benefits over HAL

[log in to unmask]

Wed, 7 Jan 1998 09:04:48 -0800

50 lines

Re: Gold Flash benefits over HAL

Mike Barmuta <[log in to unmask]>

Wed, 7 Jan 1998 10:08:24 -0800

11 lines

Gold Flash benefits over HAL

Evan Jones <[log in to unmask]>

Wed, 7 Jan 1998 16:53:49 -0500

87 lines

Re: Gold Flash benefits over HAL

Lenny Kurup <[log in to unmask]>

Fri, 9 Jan 1998 10:51:05 -0500

60 lines

Re: Gold Flash benefits over HAL

Steve Schrader <[log in to unmask]>

Fri, 9 Jan 1998 11:16:20 -0500

90 lines

Re: Gold Flash benefits over HAL

SIRGuru <[log in to unmask]>

Fri, 9 Jan 1998 14:33:51 EST

41 lines

New Thread

Gold Plating and solderability ?

Gold Plating and solderability ?

JB <[log in to unmask]>

Wed, 7 Jan 1998 22:26:24 +0800

47 lines

Re: Gold Plating and solderability ?

David D Hillman <[log in to unmask]>

Wed, 7 Jan 1998 08:47:22 -0600

82 lines

Re: Gold Plating and solderability ?

JB <[log in to unmask]>

Wed, 7 Jan 1998 23:07:42 +0800

91 lines

Re: Gold Plating and solderability ?

Aric J Parr <[log in to unmask]>

Wed, 7 Jan 1998 10:42:07 -0500

24 lines

Re: Gold Plating and solderability ?

Engelmaier <[log in to unmask]>

Thu, 8 Jan 1998 00:16:39 EST

43 lines

New Thread

Gold Plating Question

Gold Plating Question

Mitchell, James <[log in to unmask]>

Wed, 7 Jan 1998 08:31:21 -0500

36 lines

Re: Gold Plating Question

Jerry Cupples <[log in to unmask]>

Wed, 7 Jan 1998 09:42:05 -0600

65 lines

Re: Gold Plating Question

Electr1998 <[log in to unmask]>

Wed, 7 Jan 1998 11:13:56 EST

30 lines

Re: Gold Plating Question

Jeff Seeger <[log in to unmask]>

Wed, 7 Jan 1998 12:20:44 -0500

48 lines

Re: Gold Plating Question

David D Hillman <[log in to unmask]>

Thu, 8 Jan 1998 07:41:13 -0600

89 lines

Re: Gold Plating Question

SIRGuru <[log in to unmask]>

Thu, 8 Jan 1998 09:43:29 EST

36 lines

Re: Gold Plating Question

Jerry Cupples <[log in to unmask]>

Thu, 8 Jan 1998 10:47:13 -0600

65 lines

Re: Gold Plating Question

DAVID C WEBER <[log in to unmask]>

Thu, 8 Jan 1998 19:59:29 -0500

65 lines

Re: Gold Plating Question

David D Hillman <[log in to unmask]>

Sun, 11 Jan 1998 19:55:08 -0600

67 lines

Re: Gold Plating Question

Rod Martens <[log in to unmask]>

Mon, 12 Jan 1998 09:29:53 -0700

24 lines

Re: Gold Plating Question

David D Hillman <[log in to unmask]>

Wed, 14 Jan 1998 11:34:36 -0600

142 lines

New Thread

Gold Tinning Pot

Gold Tinning Pot

Kenny Bloomquist <[log in to unmask]>

Tue, 13 Jan 1998 10:51:07 -0800

37 lines

Re: Gold Tinning Pot

[log in to unmask]

Wed, 14 Jan 1998 06:24:17 -0500

56 lines

New Thread

Greater Boston IPCDC Chapter Meeting, Jan 7th @ 6pm

Greater Boston IPCDC Chapter Meeting, Jan 7th @ 6pm

Jeff Seeger <[log in to unmask]>

Mon, 5 Jan 1998 17:32:52 -0500

53 lines

New Thread

Haloing

Haloing

Ron Payne <[log in to unmask]>

Mon, 12 Jan 1998 15:42:58 -0800

31 lines

Haloing

Richard MacCutcheon <[log in to unmask]>

Tue, 13 Jan 1998 08:37:00 -0700

63 lines

Re: Haloing

Ed Cosper <[log in to unmask]>

Tue, 13 Jan 1998 15:38:55 -0600

105 lines

New Thread

Haloing Part 2

Haloing Part 2

Ron Payne <[log in to unmask]>

Wed, 14 Jan 1998 11:08:31 -0800

34 lines

New Thread

HASL solder specs

HASL solder specs

Peter Blokhuis <[log in to unmask]>

Fri, 30 Jan 1998 09:08:34 EST

37 lines

New Thread

help

help

Gaowu@CCTC <[log in to unmask]>

Thu, 22 Jan 1998 16:08:16 +0800

26 lines

New Thread

HELP - Obsolete CEM-1 .063 1/1

HELP - Obsolete CEM-1 .063 1/1

JB <[log in to unmask]>

Sat, 24 Jan 1998 08:58:15 +0800

35 lines

New Thread

Help!

Help!

<Alan Boots> <[log in to unmask]>

Thu, 15 Jan 1998 16:21:02 +0100

38 lines

Re: Help!

Paul Klasek <[log in to unmask]>

Fri, 16 Jan 1998 08:09:05 +1100

63 lines

New Thread

Hi Check parts

Re: Hi Check parts

Brad Kendall <[log in to unmask]>

Wed, 7 Jan 1998 13:13:17 -0500

28 lines

New Thread

High voltage circuit trace questions.

High voltage circuit trace questions.

Mark Ross <[log in to unmask]>

Wed, 7 Jan 1998 09:20:33 -0500

47 lines

Re: High voltage circuit trace questions.

Jeff Seeger <[log in to unmask]>

Wed, 7 Jan 1998 13:26:55 -0500

44 lines

New Thread

How to contact Walt Brandler

How to contact Walt Brandler

Fred Paul <[log in to unmask]>

Fri, 23 Jan 1998 12:24:14 -0800

30 lines

New Thread

Immersion Gold & Compliant Pin

Immersion Gold & Compliant Pin

Steve Schrader <[log in to unmask]>

Thu, 15 Jan 1998 16:46:32 -0500

27 lines

Re: Immersion Gold & Compliant Pin

Wally Doeling (wallyd) <[log in to unmask]>

Fri, 16 Jan 1998 09:14:04 -0800

56 lines

New Thread

Info for the PCMI

Info for the PCMI

Dave Roesler <[log in to unmask]>

Tue, 20 Jan 1998 08:51:34 -0600

27 lines

New Thread

Inquiry on persons

Inquiry on persons

Tully, Marti (AZ15) <[log in to unmask]>

Fri, 23 Jan 1998 12:44:56 -0600

25 lines

Re: Inquiry on persons

Ellen Berkman <[log in to unmask]>

Mon, 26 Jan 1998 08:54:32 -0800

33 lines

New Thread

IPC homepage address

IPC homepage address

Ed Cosper <[log in to unmask]>

Thu, 8 Jan 1998 09:03:45 -0600

23 lines

Re: IPC homepage address

Lepsche, Thomas G (NM75) <[log in to unmask]>

Thu, 8 Jan 1998 08:03:28 -0700

45 lines

Re: IPC homepage address

COLLINS, GRAHAM <[log in to unmask]>

Thu, 8 Jan 1998 10:05:44 -0500

55 lines

New Thread

IPC question

IPC question

Arif <[log in to unmask]>

Mon, 26 Jan 1998 15:29:26 PST

43 lines

Re: IPC question

Paul Klasek <[log in to unmask]>

Tue, 27 Jan 1998 11:31:56 +1100

75 lines

Re: IPC question

HGross1029 <[log in to unmask]>

Tue, 27 Jan 1998 08:27:49 EST

29 lines

New Thread

IPC SPECS and PWB COUPONS

Re: IPC SPECS and PWB COUPONS

Ed Cosper <[log in to unmask]>

Sat, 31 Jan 1998 10:32:55 -0600

70 lines

New Thread

IPC Standard (or any other) for building cables

IPC Standard (or any other) for building cables

Ellen Berkman <[log in to unmask]>

Wed, 14 Jan 1998 07:53:27 -0800

34 lines

Re: IPC Standard (or any other) for building cables

Christopher Jorgensen <[log in to unmask]>

Wed, 14 Jan 1998 07:50:32 -0600

70 lines

New Thread

IPC-MF-150

IPC-MF-150

Sheila Smith <[log in to unmask]>

Thu, 29 Jan 1998 14:59:14 -0500

28 lines

Re: IPC-MF-150

Jack Crawford <[log in to unmask]>

Thu, 29 Jan 1998 15:19:48 -0600

62 lines

New Thread

IPC-MF-150 -Reply

Re: IPC-MF-150 -Reply

Sonia Tena <[log in to unmask]>

Thu, 29 Jan 1998 14:53:06 -0800

25 lines

New Thread

IPCchat session announcement

IPCchat session announcement

[log in to unmask]

Thu, 29 Jan 1998 15:58:59 -0800

53 lines

IPCchat session announcement

[log in to unmask]

Thu, 29 Jan 1998 15:58:59 -0800

65 lines

Re: IPCchat session announcement

Karen Tellefsen <[log in to unmask]>

Thu, 29 Jan 1998 18:23:07 -0500

91 lines

Re: IPCchat session announcement

[log in to unmask]

Thu, 29 Jan 1998 19:51:28 EST

27 lines

Re: IPCchat session announcement

Stephen R. Gregory <[log in to unmask]>

Thu, 29 Jan 1998 20:40:55 EST

23 lines

New Thread

j-std-001 a and b

j-std-001 a and b

Phil Crepeau <[log in to unmask]>

Tue, 20 Jan 1998 09:57:26 U

31 lines

New Thread

j-std-001a/b

j-std-001a/b

phil crepeau <[log in to unmask]>

Wed, 21 Jan 1998 09:24:55 -0500

31 lines

j-std-001a/b

phil crepeau <[log in to unmask]>

Wed, 21 Jan 1998 21:12:44 +0000

31 lines

New Thread

JEDEC website?

JEDEC website?

Darryl Small <[log in to unmask]>

Mon, 12 Jan 1998 16:24:30 -0400

27 lines

Re: JEDEC website?

Glenn Pelkey <[log in to unmask]>

Mon, 12 Jan 1998 14:03:12 PST

41 lines

Re: JEDEC website?

Charles Elliott <[log in to unmask]>

Mon, 12 Jan 1998 17:03:38 -0400

32 lines

New Thread

Jumper wire adhesive

Jumper wire adhesive

[log in to unmask]

Mon, 12 Jan 1998 11:15:19 -0600

30 lines

Re: Jumper wire adhesive

Jim Marsico 516-595-5879 <[log in to unmask]>

Mon, 12 Jan 1998 12:49:00 -0400

25 lines

Re: Jumper wire adhesive

Darryl Small <[log in to unmask]>

Mon, 12 Jan 1998 14:41:44 -0400

69 lines

Re: Jumper wire adhesive

Chase, Ryan <[log in to unmask]>

Mon, 12 Jan 1998 13:06:34 -0700

108 lines

Re: Jumper wire adhesive

Bev Christian <[log in to unmask]>

Mon, 12 Jan 1998 15:28:59 -0500

71 lines

Re: Jumper wire adhesive

Hamilton, Richard -4454 <[log in to unmask]>

Tue, 13 Jan 1998 14:41:49 -0700

64 lines

Jumper wire adhesive

Edward J Popielarski <[log in to unmask]>

Wed, 14 Jan 1998 10:58:00 -0600

44 lines

Re: Jumper wire adhesive

Phil Bavaro <[log in to unmask]>

Mon, 12 Jan 1998 13:25:13 -0700

50 lines

New Thread

Just a few additions to Ed's thought...

Just a few additions to Ed's thought...

Mitch Morey <[log in to unmask]>

Wed, 14 Jan 1998 13:18:56 -0800

103 lines

New Thread

Ken Patel

Ken Patel

Graham Naisbitt <[log in to unmask]>

Fri, 23 Jan 1998 23:20:34 -0000

90 lines

New Thread

Ken,

Ken,

Mitch Morey <[log in to unmask]>

Fri, 9 Jan 1998 11:44:19 -0800

35 lines

New Thread

Lamination Hold Times

Lamination Hold Times

BA754 <[log in to unmask]>

Fri, 23 Jan 1998 12:36:15 EST

38 lines

Re: Lamination Hold Times

Dryfilm <[log in to unmask]>

Sat, 24 Jan 1998 19:59:31 EST

47 lines

Re: Lamination Hold Times

kerry grimes <[log in to unmask]>

Tue, 27 Jan 1998 13:34:20 -0800

139 lines

New Thread

Laminators and IPC-4101

Laminators and IPC-4101

Ed Cosper <[log in to unmask]>

Fri, 23 Jan 1998 13:26:53 -0600

57 lines

New Thread

Landpatterns for TQFP devices

Landpatterns for TQFP devices

Steve Schrader <[log in to unmask]>

Fri, 9 Jan 1998 13:26:30 -0500

24 lines

Re: Landpatterns for TQFP devices

Neil Diamond <[log in to unmask]>

Fri, 9 Jan 1998 12:45:25 -0600

48 lines

Re: Landpatterns for TQFP devices

GaryF40 <[log in to unmask]>

Fri, 9 Jan 1998 13:48:27 EST

36 lines

Re: Landpatterns for TQFP devices

Electr1998 <[log in to unmask]>

Mon, 12 Jan 1998 10:38:30 EST

73 lines

Re: Landpatterns for TQFP devices

Chan, Marcelo <[log in to unmask]>

Mon, 12 Jan 1998 10:49:37 -0500

129 lines

Re: Landpatterns for TQFP devices

Steve Schrader <[log in to unmask]>

Mon, 12 Jan 1998 11:40:32 -0500

75 lines

Re: Landpatterns for TQFP devices

Charles Barker <[log in to unmask]>

Mon, 12 Jan 1998 10:59:28 -0600

107 lines

Re: Landpatterns for TQFP devices

Eddie Brunker <[log in to unmask]>

Mon, 12 Jan 1998 17:21:28 GMT

75 lines

New Thread

Late Material or Parts

Late Material or Parts

Lepsche, Thomas G (NM75) <[log in to unmask]>

Tue, 13 Jan 1998 10:43:20 -0700

40 lines

Re: Late Material or Parts

Heather Cottingham <[log in to unmask]>

Tue, 13 Jan 1998 15:27:11 -0800

26 lines

Re: Late Material or Parts

JB <[log in to unmask]>

Wed, 14 Jan 1998 17:56:34 +0800

65 lines

New Thread

Late Production Cost Analysis

Re: Late Production Cost Analysis

J. Warhelere <[log in to unmask]>

Tue, 13 Jan 1998 22:44:27 -0500

59 lines

New Thread

Lead Soderability - second reflow

Lead Soderability - second reflow

Krishna Kalyan <[log in to unmask]>

Tue, 6 Jan 1998 07:15:45 PST

36 lines

Re: Lead Soderability - second reflow

Bev Christian <[log in to unmask]>

Tue, 6 Jan 1998 16:10:52 -0500

71 lines

Re: Lead Soderability - second reflow

Krishna Kalyan <[log in to unmask]>

Wed, 7 Jan 1998 09:35:29 PST

45 lines

New Thread

Lead Soderability - second reflow -Reply

Lead Soderability - second reflow -Reply

Matthew Park <[log in to unmask]>

Tue, 6 Jan 1998 09:05:01 -0800

84 lines

New Thread

Lead Solderability - second reflow

Re: Lead Solderability - second reflow

Paul Klasek <[log in to unmask]>

Wed, 7 Jan 1998 08:47:31 +1100

72 lines

Lead Solderability - second reflow

john balchunas <[log in to unmask]>

Wed, 7 Jan 1998 06:41:11 -0500

40 lines

New Thread

Lead Solderability - second reflow -Reply

Re: Lead Solderability - second reflow -Reply

Matthew Park <[log in to unmask]>

Tue, 6 Jan 1998 14:29:32 -0800

118 lines

Re: Lead Solderability - second reflow -Reply

Paul Klasek <[log in to unmask]>

Wed, 7 Jan 1998 10:02:23 +1100

150 lines

New Thread

Little coax connectors

Little coax connectors

Mark Radley <[log in to unmask]>

Wed, 28 Jan 1998 10:34:50 -0600

40 lines

Re: Little coax connectors

Scott Decker <[log in to unmask]>

Wed, 28 Jan 1998 09:18:54 -0800

63 lines

New Thread

Looking for: PCB laminate trading company

Looking for: PCB laminate trading company

JB <[log in to unmask]>

Fri, 9 Jan 1998 17:46:00 +0800

41 lines

New Thread

meba machines

meba machines

william walker <[log in to unmask]>

Mon, 5 Jan 1998 20:55:32 -0800

23 lines

New Thread

Mentor Users

Mentor Users

Steve Horvath <[log in to unmask]>

Thu, 15 Jan 1998 09:45:36 -0600

33 lines

Re: Mentor Users

Gary Willard-G10982 <[log in to unmask]>

Thu, 15 Jan 1998 16:45:38 +0000

62 lines

Re: Mentor Users

Yvon Hache <[log in to unmask]>

Sun, 18 Jan 1998 23:00:03 -0800

26 lines

New Thread

Metallurgical Failure Analysis course

Metallurgical Failure Analysis course

Gregg Klawson <[log in to unmask]>

Wed, 14 Jan 1998 15:08:44 -0500

39 lines

New Thread

MIL Board

MIL Board

Varadaraj.K <[log in to unmask]>

Thu, 1 Jan 1998 12:52:59 +0530

37 lines

New Thread

MIL SPEC HI REL CLEANLINESS VALUE IN mg/sq in?

MIL SPEC HI REL CLEANLINESS VALUE IN mg/sq in?

starr devere <[log in to unmask]>

Thu, 29 Jan 1998 11:58:05 -0700

27 lines

Re: MIL SPEC HI REL CLEANLINESS VALUE IN mg/sq in?

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:25 EST

45 lines

New Thread

Mil Spec.

Mil Spec.

Edward G. Shea <[log in to unmask]>

Fri, 30 Jan 1998 11:59:23 -0500

52 lines

Re: Mil Spec.

George Kotecki <[log in to unmask]>

Fri, 30 Jan 1998 14:32:15 -0600

35 lines

Re: Mil Spec.

David Girard <[log in to unmask]>

Fri, 30 Jan 1998 15:59:11 -0500

39 lines

Mil Spec.

Richard MacCutcheon <[log in to unmask]>

Fri, 30 Jan 1998 14:04:00 -0700

47 lines

Re: Mil Spec.

Joe Felts Jr. <[log in to unmask]>

Fri, 30 Jan 1998 14:17:05 -0700

38 lines

Re: Mil Spec.

Brock Hunter <[log in to unmask]>

Fri, 30 Jan 1998 16:30:51 -0500

53 lines

New Thread

MIL-810E humidity test

MIL-810E humidity test

Mient van der Molen <[log in to unmask]>

Mon, 26 Jan 1998 08:21:19 -0800

32 lines

New Thread

Mil-P-55617

Mil-P-55617

Ed Cosper <[log in to unmask]>

Thu, 29 Jan 1998 10:32:00 -0600

27 lines

Re: Mil-P-55617

David Girard <[log in to unmask]>

Thu, 29 Jan 1998 13:25:53 -0500

57 lines

New Thread

Minimum dia drilled

Minimum dia drilled

[log in to unmask]

Tue, 13 Jan 1998 15:48:13 +0200

28 lines

Re: Minimum dia drilled

Jay Soderberg <[log in to unmask]>

Tue, 13 Jan 1998 16:35:12 -0600

36 lines

New Thread

Moisture Sensitive Devices - Absorption Labels

Moisture Sensitive Devices - Absorption Labels

Yves Trudell <[log in to unmask]>

Mon, 5 Jan 1998 17:27:43 -0500

41 lines

New Thread

MTBF calculations for a system

MTBF calculations for a system

Andy Kowalewski <[log in to unmask]>

Fri, 30 Jan 1998 12:15:07 +1100

44 lines

Re: MTBF calculations for a system

VanDreel, Kirk <[log in to unmask]>

Fri, 30 Jan 1998 07:09:00 CST

68 lines

Re: MTBF calculations for a system

Doug McKean <[log in to unmask]>

Fri, 30 Jan 1998 09:22:57 -0500

81 lines

Re: MTBF calculations for a system

Werner Engelmaier <[log in to unmask]>

Fri, 30 Jan 1998 23:21:49 EST

43 lines

New Thread

Multi-Layer Boards

Multi-Layer Boards

John Guy <[log in to unmask]>

Mon, 5 Jan 1998 13:59:20 -0500

39 lines

New Thread

Need a test lab for IC failure analysis

Need a test lab for IC failure analysis

Charles Barker <[log in to unmask]>

Mon, 5 Jan 1998 14:43:12 -0600

31 lines

Re: Need a test lab for IC failure analysis

David Tyler <[log in to unmask]>

Tue, 6 Jan 1998 07:20:02 -0500

30 lines

Re: Need a test lab for IC failure analysis

Sheila Smith <[log in to unmask]>

Tue, 6 Jan 1998 08:25:45 -0500

57 lines

New Thread

Need an Omegameter

Need an Omegameter

Ed Cosper <[log in to unmask]>

Fri, 23 Jan 1998 09:41:00 -0600

24 lines

New Thread

New IPC Designers Council chapters

New IPC Designers Council chapters

GaryF40 <[log in to unmask]>

Tue, 20 Jan 1998 11:24:51 EST

36 lines

New Thread

Not All Solder is Made Alike?

Not All Solder is Made Alike?

David Bruni <[log in to unmask]>

Tue, 27 Jan 1998 16:37:51 -0500

40 lines

Re: Not All Solder is Made Alike?

Ed Holton <[log in to unmask]>

Wed, 28 Jan 1998 13:48:00 -0500

105 lines

Re: Not All Solder is Made Alike?

Brad Kendall <[log in to unmask]>

Wed, 28 Jan 1998 14:13:00 -0500

26 lines

New Thread

Olin 7025

Olin 7025

Phil Culpovich <[log in to unmask]>

Mon, 12 Jan 1998 07:30:38 -0800

32 lines

Re: Olin 7025

Robert Schetty <[log in to unmask]>

Wed, 14 Jan 1998 13:35:07 UT

64 lines

New Thread

Op AMp cross reference

Op AMp cross reference

Dennis Jon Fall <[log in to unmask]>

Tue, 13 Jan 1998 19:12:28 -0600

32 lines

Op AMp cross reference

Peter Willaert <[log in to unmask]>

Wed, 14 Jan 1998 10:29:46 +0100

55 lines

Re: Op AMp cross reference

Yvon Hache <[log in to unmask]>

Sun, 18 Jan 1998 23:07:11 -0800

26 lines

New Thread

Organic residue in cupric chloride fina

Re: Organic residue in cupric chloride fina

Dryfilm <[log in to unmask]>

Tue, 13 Jan 1998 19:43:30 EST

48 lines

New Thread

Organic residue in cupric chloride final etch

Organic residue in cupric chloride final etch

Ted Stern <[log in to unmask]>

Mon, 12 Jan 1998 16:32:25 -0800

47 lines

Re: Organic residue in cupric chloride final etch

Rick Haynes <[log in to unmask]>

Tue, 13 Jan 1998 09:31:46 -0800

201 lines

Re: Organic residue in cupric chloride final etch

Leslie O. Connally <[log in to unmask]>

Tue, 13 Jan 1998 09:42:54 -0800

99 lines

New Thread

OSP

OSP

Darrel Therriault <[log in to unmask]>

Tue, 13 Jan 1998 06:49:26 -0800

27 lines

Re: OSP

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 13 Jan 1998 10:12:36 -0500

63 lines

Re: OSP

David D Hillman <[log in to unmask]>

Wed, 14 Jan 1998 12:05:51 -0600

61 lines

New Thread

OSP & Galvanic Etch

OSP & Galvanic Etch

HGross1029 <[log in to unmask]>

Mon, 12 Jan 1998 11:55:38 EST

28 lines

Re: OSP & Galvanic Etch

RSedlak <[log in to unmask]>

Mon, 12 Jan 1998 22:09:03 EST

31 lines

Re: OSP & Galvanic Etch

Mike Barmuta <[log in to unmask]>

Tue, 13 Jan 1998 09:21:03 -0800

70 lines

Re: OSP & Galvanic Etch

ryan <[log in to unmask]>

Tue, 13 Jan 1998 20:07:47 -0400

32 lines

New Thread

OSP RESIDUE

OSP RESIDUE

Tal Young-Kim <[log in to unmask]>

Mon, 26 Jan 1998 15:05:15 +0900

72 lines

New Thread

Overheated solder joints

Overheated solder joints

Tom Moore <[log in to unmask]>

Wed, 14 Jan 1998 17:27:27 -0800

36 lines

Re: Overheated solder joints

Tom Moore <[log in to unmask]>

Fri, 16 Jan 1998 13:20:30 -0800

59 lines

Re: Overheated solder joints

David D Hillman <[log in to unmask]>

Mon, 19 Jan 1998 08:53:56 -0600

99 lines

Re: Overheated solder joints

Chan, Marcelo <[log in to unmask]>

Mon, 19 Jan 1998 10:40:31 -0500

151 lines

Re: Overheated solder joints

David D Hillman <[log in to unmask]>

Tue, 20 Jan 1998 06:16:02 -0600

155 lines

New Thread

Overheated solder joints -Reply

Overheated solder joints -Reply

Matthew Park <[log in to unmask]>

Thu, 15 Jan 1998 10:54:49 -0800

69 lines

New Thread

Oxide Lines

Oxide Lines

Meigs, Jonathan <[log in to unmask]>

Mon, 12 Jan 1998 11:52:00 -0700

32 lines

New Thread

passing grade SIR testing

passing grade SIR testing

Andy RJ McKean <[log in to unmask]>

Mon, 19 Jan 1998 21:35:03 GMT

23 lines

Re: passing grade SIR testing

Maguire, James F <[log in to unmask]>

Mon, 19 Jan 1998 20:55:27 -0800

64 lines

Re: passing grade SIR testing

SIRGuru <[log in to unmask]>

Thu, 22 Jan 1998 09:32:59 EST

77 lines

New Thread

Paste velocity thru apertures (approximate value)

Paste velocity thru apertures (approximate value)

tana <[log in to unmask]>

Fri, 9 Jan 1998 13:12:09 +0000

33 lines

Paste velocity thru apertures (approximate value)

tana <[log in to unmask]>

Mon, 12 Jan 1998 10:07:28 +0000

33 lines

Re: Paste velocity thru apertures (approximate value)

Martin Farrell <[log in to unmask]>

Mon, 12 Jan 1998 13:43:13 +0000

33 lines

Re: Paste velocity thru apertures (approximate value)

Rodney <[log in to unmask]>

Mon, 12 Jan 1998 08:16:18 CST

25 lines

Re: Paste velocity thru apertures (approximate value)

Kathy Palumbo <[log in to unmask]>

Mon, 12 Jan 1998 10:39:19 -0800

70 lines

New Thread

Paste velocity thru apertures (approximate value) -Reply

Paste velocity thru apertures (approximate value) -Reply

Matthew Park <[log in to unmask]>

Mon, 12 Jan 1998 10:23:46 -0800

72 lines

New Thread

PCB Design Verification Tools

PCB Design Verification Tools

Electr1998 <[log in to unmask]>

Mon, 5 Jan 1998 09:31:41 EST

33 lines

New Thread

PCB Laminate FAQ

PCB Laminate FAQ

JB <[log in to unmask]>

Sat, 3 Jan 1998 16:51:21 +0800

40 lines

New Thread

PCB Laminate FAQ - Vetronite ?

Re: PCB Laminate FAQ - Vetronite ?

Roland Jaquet <[log in to unmask]>

Mon, 5 Jan 1998 08:59:06 +0100

77 lines

New Thread

PCB Mfg - Cam software survey.

PCB Mfg - Cam software survey.

Ed Cosper <[log in to unmask]>

Thu, 22 Jan 1998 13:57:12 -0600

28 lines

Re: PCB Mfg - Cam software survey.

Dave Kleinman <[log in to unmask]>

Thu, 22 Jan 1998 14:54:25 -0800

29 lines

Re: PCB Mfg - Cam software survey.

RICK TAORMINO <[log in to unmask]>

Fri, 23 Jan 1998 06:37:53 -0500

54 lines

Re: PCB Mfg - Cam software survey.

Tony King <[log in to unmask]>

Fri, 23 Jan 1998 07:46:05 -0800

31 lines

Re: PCB Mfg - Cam software survey.

Roland Jaquet <[log in to unmask]>

Fri, 23 Jan 1998 16:48:00 +0100

71 lines

Re: PCB Mfg - Cam software survey.

Robert Welch <[log in to unmask]>

Sat, 24 Jan 1998 12:31:33 +0000

30 lines

New Thread

PCB Solderability Analysis

PCB Solderability Analysis

Tucker, Steve (KS) <[log in to unmask]>

Mon, 19 Jan 1998 16:49:48 -0700

61 lines

Re: PCB Solderability Analysis

[log in to unmask]

Mon, 19 Jan 1998 17:52:53 -0800

62 lines

Re: PCB Solderability Analysis

David D Hillman <[log in to unmask]>

Tue, 20 Jan 1998 06:18:22 -0600

125 lines

Re: PCB Solderability Analysis

Paul Terranova <[log in to unmask]>

Tue, 20 Jan 1998 09:12:07 -0500

64 lines

Re: PCB Solderability Analysis

[log in to unmask]

Tue, 20 Jan 1998 08:12:51 PST8

76 lines

Re: PCB Solderability Analysis

Ed Cosper <[log in to unmask]>

Tue, 20 Jan 1998 09:19:59 -0600

79 lines

Re: PCB Solderability Analysis

[log in to unmask]

Tue, 20 Jan 1998 09:51:32 -0800

63 lines

New Thread

Philadelphia Designers Council

Philadelphia Designers Council

GaryF40 <[log in to unmask]>

Tue, 20 Jan 1998 12:01:12 EST

31 lines

New Thread

Pinless Lamination

Pinless Lamination

JSSallo <[log in to unmask]>

Sun, 4 Jan 1998 19:53:24 EST

26 lines

New Thread

Pinless Routing (External Pinning Method)

Pinless Routing (External Pinning Method)

Padmanabha Anandapuram Halappa <[log in to unmask]>

Mon, 19 Jan 1998 18:09:08 EST

58 lines

New Thread

Plating Adhesions and Poiso

Re: Plating Adhesions and Poiso

David D Hillman <[log in to unmask]>

Mon, 5 Jan 1998 10:40:54 -0600

102 lines

New Thread

Pluractec

Pluractec

drilbert <[log in to unmask]>

Fri, 16 Jan 1998 08:39:20 -0800

26 lines

Re: Pluractec

Paul Gould <[log in to unmask]>

Fri, 16 Jan 1998 20:40:23 +0000

33 lines

Re: Pluractec

Hans Rohr <[log in to unmask]>

Fri, 16 Jan 1998 21:21:31 -0500

61 lines

New Thread

Pluractec / pinning machines

Pluractec / pinning machines

DAVID MANDER <[log in to unmask]>

Mon, 19 Jan 1998 22:20:50 -0500

25 lines

New Thread

Poor soldering of 240 pin PQFP

Poor soldering of 240 pin PQFP

Eddie Brunker <[log in to unmask]>

Tue, 20 Jan 1998 09:44:44 GMT

36 lines

New Thread

POOR SOLDERING OF 240 PIN PQFP LEADS

POOR SOLDERING OF 240 PIN PQFP LEADS

Eddie Brunker <[log in to unmask]>

Mon, 19 Jan 1998 10:02:30 GMT

65 lines

New Thread

Poor Soldering of 240 pin PQFPs

Poor Soldering of 240 pin PQFPs

Ronald Mowbray <[log in to unmask]>

Fri, 16 Jan 1998 12:30:12 -0500

34 lines

New Thread

Poor Soldering of 240 pin PQFPs -Reply

Poor Soldering of 240 pin PQFPs -Reply

Matthew Park <[log in to unmask]>

Fri, 16 Jan 1998 10:42:00 -0800

72 lines

New Thread

Poor Soldering of 240 pin PQFPs more info

Poor Soldering of 240 pin PQFPs more info

Ronald Mowbray <[log in to unmask]>

Fri, 16 Jan 1998 14:48:11 -0500

37 lines

Poor Soldering of 240 pin PQFPs more info

[log in to unmask]

Sat, 17 Jan 1998 13:29:41 -0600

100 lines

Re: Poor Soldering of 240 pin PQFPs more info

Charles Barker <[log in to unmask]>

Fri, 16 Jan 1998 14:47:57 -0600

91 lines

Re: Poor Soldering of 240 pin PQFPs more info

Brad Kendall <[log in to unmask]>

Fri, 16 Jan 1998 15:17:06 -0500

36 lines

New Thread

Post Lamination Edge Finishing

Post Lamination Edge Finishing

George Lubbecke <[log in to unmask]>

Mon, 5 Jan 1998 11:44:00 -0800

29 lines

Re: Post Lamination Edge Finishing

Joseph E. J. Duclos Jr. <[log in to unmask]>

Fri, 9 Jan 1998 18:08:40 -0500

138 lines

New Thread

Power Backplane Technology

Power Backplane Technology

Gus Morvillo <[log in to unmask]>

Fri, 23 Jan 1998 15:18:42 -0400

25 lines

New Thread

Pre-Wave Solder Baking

Pre-Wave Solder Baking

Wesley Samples <[log in to unmask]>

Mon, 12 Jan 1998 16:46:22 -0600

43 lines

New Thread

Preflux

Preflux

Myung C. Chu <[log in to unmask]>

Wed, 14 Jan 1998 19:33:14 +0900

34 lines

New Thread

Process eval. boards

Process eval. boards

Mark Bailey. <[log in to unmask]>

Mon, 5 Jan 1998 10:18:52 -0500

29 lines

New Thread

pull test >>> IPC FELLOW NEEDED PLEASE ! > IPC-SM-785 !

pull test >>> IPC FELLOW NEEDED PLEASE ! > IPC-SM-785 !

Paul Klasek <[log in to unmask]>

Mon, 5 Jan 1998 17:44:40 +1100

92 lines

Re: pull test >>> IPC FELLOW NEEDED PLEASE ! > IPC-SM-785 !

Engelmaier <[log in to unmask]>

Mon, 5 Jan 1998 12:48:32 EST

45 lines

Re: pull test >>> IPC FELLOW NEEDED PLEASE ! > IPC-SM-785 !

Paul Klasek <[log in to unmask]>

Tue, 6 Jan 1998 17:36:56 +1100

73 lines

New Thread

pull test std

pull test std

Kelvin Ang <[log in to unmask]>

Fri, 2 Jan 1998 09:06:25 +0800

27 lines

Re: pull test std

Paul Klasek <[log in to unmask]>

Fri, 2 Jan 1998 13:26:59 +1100

53 lines

Re: pull test std

Engelmaier <[log in to unmask]>

Fri, 2 Jan 1998 09:10:04 EST

38 lines

New Thread

Punch needed

Punch needed

Ed Cosper <[log in to unmask]>

Thu, 15 Jan 1998 10:02:49 -0600

31 lines

Re: Punch needed

Joe Felts Jr. <[log in to unmask]>

Thu, 15 Jan 1998 13:03:38 -0700

65 lines

New Thread

PVC

PVC

Anthony Morrissey <[log in to unmask]>

Mon, 19 Jan 1998 11:00:59 +0000

31 lines

New Thread

PWB Coupons

PWB Coupons

[log in to unmask]

Fri, 30 Jan 1998 22:17:11 EST

31 lines

Re: PWB Coupons

Werner Engelmaier <[log in to unmask]>

Sat, 31 Jan 1998 08:19:34 EST

41 lines

Re: PWB Coupons

Sharon Polmanteer <[log in to unmask]>

Sat, 31 Jan 1998 11:02:02 -0800

63 lines

New Thread

Re : Design Houses in Australia

Re : Design Houses in Australia

brian rusten <[log in to unmask]>

Mon, 19 Jan 1998 07:44:14 +1100

58 lines

Re: Re : Design Houses in Australia

Paul Klasek <[log in to unmask]>

Mon, 19 Jan 1998 09:20:20 +1100

93 lines

New Thread

Re. Wave solder machine

Re. Wave solder machine

DDoer195 <[log in to unmask]>

Sun, 18 Jan 1998 20:02:06 EST

24 lines

Re: Re. Wave solder machine

Charles Barker <[log in to unmask]>

Mon, 19 Jan 1998 09:57:50 -0600

55 lines

New Thread

Reduced Black Oxide

Reduced Black Oxide

Eltek Ltd. - Process Engineering <[log in to unmask]>

Sun, 18 Jan 1998 09:56:56 +0200

36 lines

Re: Reduced Black Oxide

Motoyo Wajima <[log in to unmask]>

Mon, 19 Jan 1998 08:56:30 +0900

73 lines

Re: Reduced Black Oxide

RSedlak <[log in to unmask]>

Mon, 19 Jan 1998 07:09:07 EST

34 lines

Reduced Black Oxide

Anthony Morrissey <[log in to unmask]>

Mon, 19 Jan 1998 12:55:45 +0000

26 lines

New Thread

Reduced Black Oxide -Reply

Reduced Black Oxide -Reply

Fred Johnson <[log in to unmask]>

Mon, 19 Jan 1998 13:55:19 +0000

66 lines

New Thread

Reflow time for BGA and SMT

Reflow time for BGA and SMT

Chan, Marcelo <[log in to unmask]>

Wed, 28 Jan 1998 08:49:27 -0500

34 lines

Re: Reflow time for BGA and SMT

David Whalley <[log in to unmask]>

Wed, 28 Jan 1998 15:19:32 +0000

54 lines

Re: Reflow time for BGA and SMT

Engelmaier <[log in to unmask]>

Thu, 29 Jan 1998 09:52:41 EST

56 lines

Re: Reflow time for BGA and SMT

Phil Bavaro <[log in to unmask]>

Thu, 29 Jan 1998 12:13:19 -0700

92 lines

New Thread

Reflow time for BGA and SMT -Reply

Re: Reflow time for BGA and SMT -Reply

JON MOORE <[log in to unmask]>

Thu, 29 Jan 1998 10:49:10 -0500

88 lines

New Thread

Remove

Remove

D'Auteuil, Gerry <[log in to unmask]>

Thu, 15 Jan 1998 07:16:00 PST

20 lines

Remove

LINDA SASS <[log in to unmask]>

Thu, 15 Jan 1998 07:30:00 -0600

31 lines

Remove

D'Auteuil, Gerry <[log in to unmask]>

Fri, 16 Jan 1998 10:05:00 PST

21 lines

New Thread

Request for Stencil Aperture Shapes

Request for Stencil Aperture Shapes

BPL Ltd. <[log in to unmask]>

Thu, 8 Jan 1998 09:30:25 +0530

17 lines

New Thread

Research money available for the industry

Research money available for the industry

David Bergman <[log in to unmask]>

Tue, 20 Jan 1998 10:12:52 -0600

167 lines

New Thread

respons on trace impedance over perforated planes

respons on trace impedance over perforated planes

Jan Vercammen <[log in to unmask]>

Fri, 16 Jan 1998 09:47:24 +0100

87 lines

New Thread

Re[2]: [TN] Ammonia Etchant - Replenisher

Re: Re[2]: [TN] Ammonia Etchant - Replenisher

AHamil2719 <[log in to unmask]>

Thu, 22 Jan 1998 09:39:40 EST

23 lines

Re: Re[2]: [TN] Ammonia Etchant - Replenisher

AHamil2719 <[log in to unmask]>

Thu, 22 Jan 1998 09:46:05 EST

28 lines

New Thread

Re[2]: [TN] SIR Reading

Re: Re[2]: [TN] SIR Reading

SIRGuru <[log in to unmask]>

Thu, 8 Jan 1998 09:43:24 EST

38 lines

Re: Re[2]: [TN] SIR Reading

DAVID C WEBER <[log in to unmask]>

Thu, 8 Jan 1998 19:49:21 -0500

70 lines

New Thread

RF Circuitry and Rosin Core Solder

RF Circuitry and Rosin Core Solder

[log in to unmask]

Tue, 20 Jan 1998 19:30:19 -0600

31 lines

Re: RF Circuitry and Rosin Core Solder

Bev Christian <[log in to unmask]>

Wed, 21 Jan 1998 10:44:34 -0500

64 lines

Re: RF Circuitry and Rosin Core Solder

Graham Naisbitt <[log in to unmask]>

Wed, 21 Jan 1998 22:01:12 -0000

88 lines

Re: RF Circuitry and Rosin Core Solder

Sherman Banks <[log in to unmask]>

Thu, 22 Jan 1998 14:12:44 -0800

63 lines

Re: RF Circuitry and Rosin Core Solder

Karen Tellefsen <[log in to unmask]>

Fri, 23 Jan 1998 03:24:43 -0800

95 lines

Re: RF Circuitry and Rosin Core Solder

Jerry Cupples <[log in to unmask]>

Fri, 23 Jan 1998 09:13:59 -0600

56 lines

Re: RF Circuitry and Rosin Core Solder

Graham Naisbitt <[log in to unmask]>

Sun, 25 Jan 1998 01:26:04 -0000

155 lines

Re: RF Circuitry and Rosin Core Solder

Graham Naisbitt <[log in to unmask]>

Wed, 28 Jan 1998 22:09:23 -0000

114 lines

Re: RF Circuitry and Rosin Core Solder

Karen Tellefsen <[log in to unmask]>

Wed, 28 Jan 1998 18:03:53 -0500

92 lines

Re: RF Circuitry and Rosin Core Solder

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:24 EST

37 lines

New Thread

RF layouts

RF layouts

budster <[log in to unmask]>

Thu, 15 Jan 1998 08:16:20 -0800

27 lines

RF layouts

john balchunas <[log in to unmask]>

Sun, 18 Jan 1998 18:05:56 -0500

41 lines

New Thread

routing

routing

Ken Brown <[log in to unmask]>

Fri, 30 Jan 1998 10:31:18 -0800

32 lines

Re: routing

Ed Cosper <[log in to unmask]>

Fri, 30 Jan 1998 11:05:32 -0600

67 lines

Re: routing

[log in to unmask] <[log in to unmask]>

Fri, 30 Jan 1998 21:21:01 -0800

29 lines

New Thread

scicards conversion

scicards conversion

Joseph DeAngelis <[log in to unmask]>

Wed, 14 Jan 1998 16:13:22 -0500

23 lines

Re: scicards conversion

E.A. Speer <[log in to unmask]>

Wed, 14 Jan 1998 17:54:58 -0500

64 lines

Re: scicards conversion

Wolfgang Schenke <[log in to unmask]>

Mon, 19 Jan 1998 05:50:14 -0800

50 lines

New Thread

Serial # on PCB Washing off in rinse

Serial # on PCB Washing off in rinse

Ferrell-2 Bobby <[log in to unmask]>

Wed, 28 Jan 1998 08:22:38 -0500

47 lines

Re: Serial # on PCB Washing off in rinse

Sharon Polmanteer <[log in to unmask]>

Wed, 28 Jan 1998 06:46:09 -0800

78 lines

Re: Serial # on PCB Washing off in rinse

Mike Barmuta <[log in to unmask]>

Wed, 28 Jan 1998 08:41:20 -0800

90 lines

Re: Serial # on PCB Washing off in rinse

MMMichel <[log in to unmask]>

Thu, 29 Jan 1998 01:48:23 EST

30 lines

New Thread

Serial # on PCB Washing off in rinse -Reply

Serial # on PCB Washing off in rinse -Reply

Matthew Park <[log in to unmask]>

Wed, 28 Jan 1998 08:04:39 -0800

81 lines

Serial # on PCB Washing off in rinse -Reply

JON MOORE <[log in to unmask]>

Thu, 29 Jan 1998 08:44:21 -0500

73 lines

Re: Serial # on PCB Washing off in rinse -Reply

Doug Pauls <[log in to unmask]>

Fri, 30 Jan 1998 10:38:23 EST

36 lines

New Thread

Shrinkage Probelm in CEM-3 Material

Shrinkage Probelm in CEM-3 Material

Padmanabha Anandapuram Halappa <[log in to unmask]>

Thu, 22 Jan 1998 09:59:01 EST

28 lines

New Thread

sign off assistance for Anthony Peirano

sign off assistance for Anthony Peirano

Jack Crawford <[log in to unmask]>

Mon, 12 Jan 1998 12:23:57 -0600

77 lines

New Thread

Silver Conductive epoxy

Silver Conductive epoxy

Interquip Limited <[log in to unmask]>

Tue, 20 Jan 1998 10:44:33 +0800

38 lines

Re: Silver Conductive epoxy

Paul Klasek <[log in to unmask]>

Tue, 20 Jan 1998 15:08:10 +1100

88 lines

Re: Silver Conductive epoxy

Darryl Small <[log in to unmask]>

Tue, 20 Jan 1998 11:31:37 -0400

28 lines

New Thread

Silver epoxy

Silver epoxy

[log in to unmask]

Wed, 7 Jan 1998 13:48:45 +0100

93 lines

New Thread

Silver epoxy again

Silver epoxy again

[log in to unmask]

Thu, 8 Jan 1998 16:22:51 +0100

110 lines

New Thread

Simon,

Simon,

Mitch Morey <[log in to unmask]>

Tue, 27 Jan 1998 16:20:28 -0800

122 lines

New Thread

SIR Reading

SIR Reading

tgyee <[log in to unmask]>

Mon, 5 Jan 1998 10:03:52 PST

29 lines

Re: SIR Reading

SIRGuru <[log in to unmask]>

Mon, 5 Jan 1998 07:35:58 EST

43 lines

Re: SIR Reading

Guenter Grossmann <[log in to unmask]>

Tue, 6 Jan 1998 12:47:31 GMT

29 lines

Re: SIR Reading

Pratap Singh <[log in to unmask]>

Sat, 10 Jan 1998 14:02:40 -0800

28 lines

New Thread

Small holes, Thick Boards & Hole Reliability

Small holes, Thick Boards & Hole Reliability

Thad McMillan <[log in to unmask]>

Fri, 30 Jan 1998 17:39:00 CST

54 lines

Re: Small holes, Thick Boards & Hole Reliability

[log in to unmask]

Fri, 30 Jan 1998 19:26:07 EST

30 lines

Re: Small holes, Thick Boards & Hole Reliability

Wally Doeling (wallyd) <[log in to unmask]>

Fri, 30 Jan 1998 16:52:51 -0800

117 lines

Re: Small holes, Thick Boards & Hole Reliability

William Spalton <[log in to unmask]>

Fri, 30 Jan 1998 22:00:38 -0500

118 lines

Re: Small holes, Thick Boards & Hole Reliability

Werner Engelmaier <[log in to unmask]>

Fri, 30 Jan 1998 23:21:58 EST

167 lines

Re: Small holes, Thick Boards & Hole Reliability

Sharon Polmanteer <[log in to unmask]>

Sat, 31 Jan 1998 10:57:41 -0800

88 lines

New Thread

SMT Connector Testing

SMT Connector Testing

Bob Cronin <[log in to unmask]>

Fri, 23 Jan 1998 14:03:38 -0800

28 lines

New Thread

Solder Paste on PTH Boards. tickness=125 mils

Solder Paste on PTH Boards. tickness=125 mils

Mauricio Castro <[log in to unmask]>

Wed, 28 Jan 1998 11:25:39 -0600

29 lines

Re: Solder Paste on PTH Boards. tickness=125 mils

Ziarek, Paul J <[log in to unmask]>

Wed, 28 Jan 1998 15:37:57 -0600

58 lines

New Thread

Solder Paste Safety

Solder Paste Safety

Signorelli, Paul <[log in to unmask]>

Wed, 14 Jan 1998 09:27:25 -0600

24 lines

New Thread

Solder spots on gold fingers

Solder spots on gold fingers

[log in to unmask]

Thu, 29 Jan 1998 17:04:23 EST

52 lines

Re: Solder spots on gold fingers

Charles Barker <[log in to unmask]>

Thu, 29 Jan 1998 16:56:52 -0600

99 lines

Re: Solder spots on gold fingers

Stephen R. Gregory <[log in to unmask]>

Thu, 29 Jan 1998 19:05:55 EST

67 lines

Re: Solder spots on gold fingers

ETS <[log in to unmask]>

Fri, 30 Jan 1998 10:24:23 -0800

95 lines

Re: Solder spots on gold fingers

annie laberge <[log in to unmask]>

Fri, 30 Jan 1998 16:35:35 -0500

96 lines

Re: Solder spots on gold fingers

Joe Reichert <[log in to unmask]>

Fri, 30 Jan 1998 16:47:12 -0500

134 lines

New Thread

Solder spots on gold fingers -Reply

Re: Solder spots on gold fingers -Reply

Ron Hayashi <[log in to unmask]>

Fri, 30 Jan 1998 13:48:14 -0800

25 lines

New Thread

Solder Thickness

Solder Thickness

[log in to unmask]

Tue, 20 Jan 1998 09:40:39 EST

29 lines

New Thread

Solderability During Remelt

Solderability During Remelt

Krishna Kalyan <[log in to unmask]>

Tue, 6 Jan 1998 13:59:13 PST

33 lines

Re: Solderability During Remelt

Case, Jeff <[log in to unmask]>

Tue, 6 Jan 1998 16:25:00 -0700

19 lines

New Thread

Solderability During Remelt -Reply

Solderability During Remelt -Reply

Matthew Park <[log in to unmask]>

Tue, 6 Jan 1998 14:50:08 -0800

66 lines

New Thread

Soltec Wave Solder Machine

Re: Soltec Wave Solder Machine

Ron Hollandsworth <[log in to unmask]>

Thu, 29 Jan 1998 09:05:35 -0500

32 lines

New Thread

Soltec WaveSoldering Machines

Soltec WaveSoldering Machines

Stammely, Tim <[log in to unmask]>

Wed, 28 Jan 1998 11:14:17 -0500

30 lines

Re: Soltec WaveSoldering Machines

Blanchet,Richard <[log in to unmask]>

Wed, 28 Jan 1998 11:59:00 -0500

60 lines

Re: Soltec WaveSoldering Machines

Jan Satterfield <[log in to unmask]>

Wed, 28 Jan 1998 13:52:22 -0700

53 lines

New Thread

SPEC. OF IVH,BVH

SPEC. OF IVH,BVH

Jae-heun Joung <[log in to unmask]>

Fri, 23 Jan 1998 12:20:36 KST

39 lines

Re: SPEC. OF IVH,BVH

Werner Engelmaier <[log in to unmask]>

Mon, 26 Jan 1998 12:10:01 EST

41 lines

Re: SPEC. OF IVH,BVH

Motoyo Wajima <[log in to unmask]>

Tue, 27 Jan 1998 14:41:48 +0900

74 lines

New Thread

Splice tape...

Splice tape...

Brad Kendall <[log in to unmask]>

Tue, 13 Jan 1998 15:37:56 -0500

27 lines

Re: Splice tape...

Cyker, Howard A (Howard) <[log in to unmask]>

Wed, 14 Jan 1998 08:36:34 -0500

57 lines

New Thread

Stencil Aperture Shapes

Stencil Aperture Shapes

Clinton Windsor <[log in to unmask]>

Wed, 7 Jan 1998 10:27:50 +0100

90 lines

Re: Stencil Aperture Shapes

[log in to unmask]

Wed, 7 Jan 1998 09:26:11 -0800

50 lines

New Thread

Stencil Aperture Shapes -Reply

Stencil Aperture Shapes -Reply

Allan Kerr <[log in to unmask]>

Wed, 7 Jan 1998 09:00:03 -0500

45 lines

Stencil Aperture Shapes -Reply

Matthew Park <[log in to unmask]>

Wed, 7 Jan 1998 08:36:30 -0800

58 lines

Re: Stencil Aperture Shapes -Reply

Hamilton, Richard -4454 <[log in to unmask]>

Wed, 7 Jan 1998 09:51:10 -0700

90 lines

Re: Stencil Aperture Shapes -Reply

Tenison Stone <[log in to unmask]>

Wed, 7 Jan 1998 11:17:58 -0600

89 lines

Re: Stencil Aperture Shapes -Reply

[log in to unmask]

Wed, 7 Jan 1998 12:39:17 -0600

28 lines

Re: Stencil Aperture Shapes -Reply

Brad Kendall <[log in to unmask]>

Wed, 7 Jan 1998 15:53:08 -0500

32 lines

Re: Stencil Aperture Shapes -Reply

[log in to unmask]

Wed, 7 Jan 1998 12:39:17 -0600

35 lines

Stencil Aperture Shapes -Reply

Clinton Windsor <[log in to unmask]>

Mon, 12 Jan 1998 08:06:43 +0100

11 lines

Re: Stencil Aperture Shapes -Reply

Jay DeKing (EMA) <[log in to unmask]>

Mon, 19 Jan 1998 11:50:27 -0500

89 lines

Re: Stencil Aperture Shapes -Reply

Jerome Yeo <[log in to unmask]>

Tue, 20 Jan 1998 10:08:14 +0800

138 lines

Re: Stencil Aperture Shapes -Reply

John Bushie <[log in to unmask]>

Fri, 23 Jan 1998 09:18:55 -0600

183 lines

New Thread

Stencil Aperture Shapes -Reply -Reply

Stencil Aperture Shapes -Reply -Reply

Lisa Anderson <[log in to unmask]>

Thu, 8 Jan 1998 16:32:29 -0500

28 lines

New Thread

Stencil Aperture Shapes -Reply -Reply -Reply -Reply

Stencil Aperture Shapes -Reply -Reply -Reply -Reply

Matthew Park <[log in to unmask]>

Mon, 12 Jan 1998 09:11:10 -0800

91 lines

New Thread

Stencil Format

Stencil Format

[log in to unmask]

Thu, 22 Jan 1998 11:35:39 +0200

26 lines

New Thread

Stencil Format- correction

Stencil Format- correction

[log in to unmask]

Thu, 22 Jan 1998 18:13:22 +0200

26 lines

New Thread

Stencil Print Glue

Stencil Print Glue

Paul Stolar <[log in to unmask]>

Thu, 22 Jan 1998 08:38:45 -0600

24 lines

Re: Stencil Print Glue

TheITMTeam <[log in to unmask]>

Thu, 22 Jan 1998 10:25:52 EST

31 lines

New Thread

Steve McBride [TN] Design for Manufacturing

Steve McBride [TN] Design for Manufacturing

Hamilton, Richard -4454 <[log in to unmask]>

Tue, 27 Jan 1998 09:52:21 -0700

127 lines

New Thread

Subscribe

Subscribe

Sonia Tena <[log in to unmask]>

Fri, 16 Jan 1998 14:40:47 -0800

21 lines

subscribe

Everett McSwain <[log in to unmask]>

Tue, 27 Jan 1998 15:05:34 -0600

25 lines

New Thread

Summary (and Closure?) RE: Area of Cylinder

Summary (and Closure?) RE: Area of Cylinder

Fred Paul <[log in to unmask]>

Tue, 6 Jan 1998 12:22:24 -0800

47 lines

New Thread

Surface Mount Council Annouces Vision 2010 Workshop.

Surface Mount Council Annouces Vision 2010 Workshop.

David Bergman <[log in to unmask]>

Tue, 6 Jan 1998 16:08:06 -0600

69 lines

New Thread

Surface Tension Constant

Surface Tension Constant

Krishna Kalyan <[log in to unmask]>

Wed, 14 Jan 1998 09:40:35 PST

30 lines

New Thread

Tech Net Listing

Tech Net Listing

[log in to unmask]

Fri, 30 Jan 1998 19:26:46 EST

33 lines

New Thread

TechNet Digest - 13 Jan 1998

Re: TechNet Digest - 13 Jan 1998

Phil Culpovich <[log in to unmask]>

Wed, 14 Jan 1998 10:05:05 -0800

67 lines

Re: TechNet Digest - 13 Jan 1998

Lang999 <[log in to unmask]>

Tue, 20 Jan 1998 04:08:03 EST

21 lines

New Thread

Technical handbook credits

Technical handbook credits

Joseph Fjelstad <[log in to unmask]>

Tue, 27 Jan 1998 15:23:28 -0800

43 lines

New Thread

Techniques to locate power and ground short on PWB bare board

Techniques to locate power and ground short on PWB bare board

Henry Coulter <[log in to unmask]>

Thu, 22 Jan 1998 17:57:45 -0700

22 lines

New Thread

Test,please ignore

Test,please ignore

Motoyo Wajima <[log in to unmask]>

Tue, 27 Jan 1998 12:04:11 +0900

31 lines

test,please ignore

Motoyo Wajima <[log in to unmask]>

Thu, 29 Jan 1998 15:45:32 +0900

31 lines

New Thread

Thank you all

Thank you all

Eddie Brunker <[log in to unmask]>

Mon, 5 Jan 1998 11:35:20 GMT

58 lines

Re: Thank you all

TheITMTeam <[log in to unmask]>

Mon, 5 Jan 1998 08:56:15 EST

46 lines

Re: Thank you all

Joseph Fjelstad <[log in to unmask]>

Mon, 5 Jan 1998 07:57:17 -0800

95 lines

Re: Thank you all

Engelmaier <[log in to unmask]>

Mon, 5 Jan 1998 12:48:11 EST

45 lines

Re: Thank you all

Gabriela Bogdan <[log in to unmask]>

Mon, 5 Jan 1998 22:51:45 +0000

103 lines

Re: Thank you all

AHamil2719 <[log in to unmask]>

Mon, 5 Jan 1998 15:11:02 EST

30 lines

Re: Thank you all

Eltek Ltd. - Process Engineering <[log in to unmask]>

Tue, 6 Jan 1998 13:13:34 +0200

43 lines

New Thread

Thank you all!

Thank you all!

Joseph Fjelstad <[log in to unmask]>

Fri, 2 Jan 1998 10:50:04 -0800

37 lines

New Thread

Thermal Conditions to Cause Damage to MSDs

Thermal Conditions to Cause Damage to MSDs

Yves Trudell <[log in to unmask]>

Thu, 8 Jan 1998 16:56:33 -0500

41 lines

New Thread

Thermal cycling

Thermal cycling

Scott Westheimer-CTUA143 <[log in to unmask]>

Tue, 6 Jan 1998 00:06:45 -0600

25 lines

Re: Thermal cycling

Guenter Grossmann <[log in to unmask]>

Tue, 6 Jan 1998 14:09:10 +0200

40 lines

Re: Thermal cycling

Engelmaier <[log in to unmask]>

Tue, 6 Jan 1998 10:11:03 EST

45 lines

Re: Thermal cycling

DAVID C WEBER <[log in to unmask]>

Tue, 6 Jan 1998 20:05:10 -0500

55 lines

New Thread

Thermal Relief at Ground/Power Plane Connections

Thermal Relief at Ground/Power Plane Connections

Ken Patel <[log in to unmask]>

Wed, 14 Jan 1998 11:12:33 -0800

36 lines

Thermal Relief at Ground/Power Plane Connections

Richard MacCutcheon <[log in to unmask]>

Wed, 14 Jan 1998 12:55:00 -0700

60 lines

Re: Thermal Relief at Ground/Power Plane Connections

Kathy Palumbo <[log in to unmask]>

Wed, 14 Jan 1998 12:12:10 -0800

69 lines

Re: Thermal Relief at Ground/Power Plane Connections

Ed Cosper <[log in to unmask]>

Wed, 14 Jan 1998 15:04:48 -0600

76 lines

Re: Thermal Relief at Ground/Power Plane Connections

Engelmaier <[log in to unmask]>

Wed, 14 Jan 1998 21:43:26 EST

38 lines

Re: Thermal Relief at Ground/Power Plane Connections

Edward Valentine <[log in to unmask]>

Thu, 15 Jan 1998 00:25:18 -0800

87 lines

New Thread

Thermal relief/ Forced Convection

Thermal relief/ Forced Convection

Eddie Brunker <[log in to unmask]>

Thu, 15 Jan 1998 10:10:37 GMT

73 lines

New Thread

Thermal relief/Sub-contract

Thermal relief/Sub-contract

Eddie Brunker <[log in to unmask]>

Thu, 15 Jan 1998 11:11:55 GMT

44 lines

New Thread

Thermount properties

Thermount properties

Electr1998 <[log in to unmask]>

Fri, 16 Jan 1998 10:29:56 EST

30 lines

Re: Thermount properties

SABowles <[log in to unmask]>

Fri, 16 Jan 1998 11:55:02 EST

37 lines

New Thread

Thermount properties -Reply

Thermount properties -Reply

Fred Johnson <[log in to unmask]>

Fri, 16 Jan 1998 15:49:44 +0000

62 lines

New Thread

Thickfilm process / hybrids

Thickfilm process / hybrids

Ducas,Patrick <[log in to unmask]>

Wed, 28 Jan 1998 14:38:00 -0500

35 lines

Re: Thickfilm process / hybrids

Jeffery L. Hempton <[log in to unmask]>

Wed, 28 Jan 1998 14:11:42 -0500

66 lines

Re: Thickfilm process / hybrids

Brett Goldstein <[log in to unmask]>

Thu, 29 Jan 1998 09:06:59 +0000

50 lines

New Thread

Tin/Lead Reflow vs. SMOBC

Tin/Lead Reflow vs. SMOBC

Joe Wackerman <[log in to unmask]>

Tue, 6 Jan 1998 14:30:33 -0800

65 lines

New Thread

Tin/Lead Reflow vs. SMOBC -Reply

Tin/Lead Reflow vs. SMOBC -Reply

Matthew Park <[log in to unmask]>

Tue, 6 Jan 1998 15:41:49 -0800

39 lines

New Thread

To Dimitry Skylar

To Dimitry Skylar

Guenter Grossmann <[log in to unmask]>

Fri, 9 Jan 1998 09:22:39 GMT

28 lines

New Thread

Tombstoning of 1210 Caps

Tombstoning of 1210 Caps

[log in to unmask]

Wed, 14 Jan 1998 11:12:19 EST

27 lines

Re: Tombstoning of 1210 Caps

Ken Patel <[log in to unmask]>

Wed, 14 Jan 1998 17:10:54 -0800

70 lines

Re: Tombstoning of 1210 Caps

Jerome Yeo <[log in to unmask]>

Fri, 16 Jan 1998 19:55:49 +0800

112 lines

Re: Tombstoning of 1210 Caps

Douglas H Bennett- Sales Engineer <[log in to unmask]>

Fri, 16 Jan 1998 10:59:07 -0800

66 lines

Re: Tombstoning of 1210 Caps

John Maxwell <[log in to unmask]>

Thu, 15 Jan 1998 16:30:17 -0700

42 lines

Re: Tombstoning of 1210 Caps

Ken Patel <[log in to unmask]>

Fri, 16 Jan 1998 13:44:34 -0800

145 lines

New Thread

Tombstoning of 1210 Caps -Reply

Tombstoning of 1210 Caps -Reply

Matthew Park <[log in to unmask]>

Wed, 14 Jan 1998 11:57:07 -0800

58 lines

New Thread

Trace Impedance over a gridded ground plane ...

Trace Impedance over a gridded ground plane ...

Doug McKean <[log in to unmask]>

Mon, 12 Jan 1998 21:13:01 -0500

60 lines

Re: Trace Impedance over a gridded ground plane ...

HGross1029 <[log in to unmask]>

Tue, 13 Jan 1998 09:06:43 EST

30 lines

Re: Trace Impedance over a gridded ground plane ...

Jeff Seeger <[log in to unmask]>

Wed, 14 Jan 1998 12:33:43 -0500

68 lines

New Thread

Track spacing for FCC requirements

Track spacing for FCC requirements

Klaus LOIBNER <[log in to unmask]>

Thu, 22 Jan 1998 19:06:12 +0100

33 lines

Track spacing for FCC requirements

Klaus LOIBNER <[log in to unmask]>

Fri, 23 Jan 1998 07:48:18 +0100

34 lines

Re: Track spacing for FCC requirements

Doug McKean <[log in to unmask]>

Wed, 28 Jan 1998 17:31:37 -0500

161 lines

New Thread

UL 94V-0 Question

UL 94V-0 Question

Chi-man Chan <[log in to unmask]>

Mon, 12 Jan 1998 20:32:59 +1100

55 lines

Re: UL 94V-0 Question

Fred2537 <[log in to unmask]>

Mon, 12 Jan 1998 08:34:34 EST

26 lines

Re: UL 94V-0 Question

Sheila Smith <[log in to unmask]>

Mon, 12 Jan 1998 09:01:54 -0500

84 lines

Re: UL 94V-0 Question

Hamilton, Richard -4454 <[log in to unmask]>

Tue, 13 Jan 1998 14:22:56 -0700

94 lines

Re: UL 94V-0 Question

Jeff Seeger <[log in to unmask]>

Tue, 13 Jan 1998 18:07:41 -0500

45 lines

Re: UL 94V-0 Question

Doug McKean <[log in to unmask]>

Wed, 14 Jan 1998 09:45:04 -0500

83 lines

Re: UL 94V-0 Question

Jeff Seeger <[log in to unmask]>

Wed, 14 Jan 1998 12:26:02 -0500

45 lines

New Thread

unsubscibe

unsubscibe

Jingcheng Zhang <[log in to unmask]>

Fri, 16 Jan 1998 20:29:55 -0800

23 lines

New Thread

UNSUBSCRIBE

UNSUBSCRIBE

Lainie Loveless <[log in to unmask]>

Fri, 9 Jan 1998 15:15:47 -0600

29 lines

Unsubscribe

C J Long <[log in to unmask]>

Sun, 11 Jan 1998 11:01:06 +0800

19 lines

Re: unsubscribe

Jingcheng Zhang <[log in to unmask]>

Tue, 20 Jan 1998 13:01:41 -0800

26 lines

Re: UNSUBSCRIBE

MUMA D. <[log in to unmask]>

Fri, 23 Jan 1998 14:53:20 -0600

19 lines

New Thread

UNSUBSCRIBE!!!!!!!

UNSUBSCRIBE!!!!!!!

Anthony H. Peirano <[log in to unmask]>

Mon, 12 Jan 1998 10:57:57 -0500

28 lines

New Thread

Use of Solder Mask Defined pads for BGA ?

Use of Solder Mask Defined pads for BGA ?

Johannes Sivula <[log in to unmask]>

Wed, 28 Jan 1998 17:04:02 +0200

41 lines

Re: Use of Solder Mask Defined pads for BGA ?

Charles Elliott <[log in to unmask]>

Wed, 28 Jan 1998 11:30:06 -0500

62 lines

Re: Use of Solder Mask Defined pads for BGA ?

Brad Kendall <[log in to unmask]>

Wed, 28 Jan 1998 11:52:19 -0500

39 lines

Re: Use of Solder Mask Defined pads for BGA ?

Eddie Brunker <[log in to unmask]>

Thu, 29 Jan 1998 09:57:08 GMT

121 lines

Re: Use of Solder Mask Defined pads for BGA ?

Brad Kendall <[log in to unmask]>

Thu, 29 Jan 1998 07:14:18 -0500

154 lines

Re: Use of Solder Mask Defined pads for BGA ?

Engelmaier <[log in to unmask]>

Thu, 29 Jan 1998 09:52:44 EST

35 lines

Re: Use of Solder Mask Defined pads for BGA ?

Jeff Seeger <[log in to unmask]>

Thu, 29 Jan 1998 10:15:58 -0500

39 lines

New Thread

Used Amistar and Herotech for sale

Used Amistar and Herotech for sale

M. Betournay <[log in to unmask]>

Tue, 13 Jan 1998 10:52:35 -0500

35 lines

New Thread

VENTURE CAPITALISTS TELL ALL ON CD-

VENTURE CAPITALISTS TELL ALL ON CD-

Spencer Kluesner <[log in to unmask]>

Thu, 29 Jan 1998 13:36:02 -0700

113 lines

Re: VENTURE CAPITALISTS TELL ALL ON CD-

Stephen R. Gregory <[log in to unmask]>

Thu, 29 Jan 1998 18:12:49 EST

24 lines