LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

1995

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Show Table of Contents

Subject	From	Date
Re: FW:	<>	Thu, 04 May 95 18:57:59
FW:	<>	Thu, 04 May 1995 13:00:00 +0000
Re: "CE" standard for Europe	Jerry Cupples	Mon, 18 Sep 1995 10:25:17 -0500
re: "CE" standard for Europe	<>	Mon, 18 Sep 95 10:17:26 EDT
"CE" standard for Europe	Miles Littlefield	15 Sep 95 20:03:44 EDT
Re: "GLASTIC" AND PALLET BOARD MATERIAL	Crawford, John A.	Fri, 12 May 95 16:08:00 EST
Re: "GLASTIC" AND PALLET BOARD MATERIAL	<>	Fri, 12 May 1995 14:37:53 -0400
"GLASTIC" INFO REQ	Crawford, John A.	Thu, 11 May 95 15:45:00 EST
"GLASTIC" INFO REQ	Crawford, John A.	Thu, 11 May 95 15:45:00 EST
Re: "Unwanted" metal on PWB after etch	David Bergman	Fri, 15 Sep 1995 10:17:16 -0500 (CDT)
"Unwanted" metal on PWB after etch	<>	Thu, 14 Sep 1995 21:46:04 -0400
(Fwd) Re: Nonfunctional Lands	TOM HYBISKE	Tue, 27 Jun 1995 11:06:16
Re: (Fwd) TechNet Information	sbryan	Thu, 21 Dec 95 11:40:08 PST
(Fwd) TechNet Information	BOB HAYNES	Wed, 20 Dec 1995 16:36:27
(no subject)	Paul Starenas	Sun, 17 Sep 95 19:58:47 -0700
(U) Electroless Ni/Au Self-life	<>	Fri, 02 Jun 95 17:34:57 EDT
(U) IEC 950 standards	<>	Thu, 05 Oct 95 08:49:49 EDT
...no subject...	Simon Li	Mon, 3 Jul 95 21:44:43 MDT
0.020" pitch SMT pad widths	<>	Tue, 15 Aug 95 21:15:01 EST
0.020" pitch SMT pad widths	<>	Tue, 15 Aug 95 10:37:28 EDT
Re: 1/4 oz cu	<>	Thu, 07 Dec 95 12:08:50 EST
1/4 oz cu	Gary S Thomas	Wed, 6 Dec 95 10:20:12 EST
55110 to IPC-RB-276	Jack Holm	Sun, 14 May 95 6:10:35 CDT
6:30 PM IPC Designers Council Chesapeake Chapter Meeting	<>	Thu, 12 Oct 95 05:42:18 EST
7628 M/L Lay-up	Greg Anderson	Wed, 27 Sep 95 10:58:00 EDT
90Pb-10Sn Solder	Ed Hare	Fri, 12 May 95 08:40:00 PDT
?	<>	Tue, 05 Dec 95 14:42:11 EST
?	<>	Tue, 05 Dec 95 12:07:11 EST
About TDR coupons	Andrew P Magee	Thu, 7 Sep 95 09:26 EST
Re: Accelerated aging of solder	David Bergman	Wed, 26 Jul 1995 13:25:15 -0500 (CDT)
Re: Accelerated aging of solder	<>	Wed, 26 Jul 95 09:37:46 PST
Accelerated aging of solder	<>	Tue, 25 Jul 95 13:51:57 MST
Re: Acceptance Standards	Mike Buetow	Tue, 22 Aug 1995 12:01:33 -0500 (CDT)
Acceptance Standards	Larry, Ext 4884, MD 9A	Tue, 22 Aug 1995 8:27:53 -0500 (CDT)
Re: address for Laura Turbini	David Christopher Whalley	Fri, 15 Sep 95 08:56:11 bst
Re: address for Laura Turbini	Evaltine	Thu, 14 Sep 1995 16:56:44 -0400 (EDT)
address for Laura Turbini	Jerry Cupples	Thu, 14 Sep 1995 12:07:38 -0500
Re: ADHESIVE DISPENSERS	Pat McGuine	Fri, 26 May 1995 14:37:43 -0500
ADHESIVE DISPENSERS	Leo Reynolds	Fri, 26 May 1995 08:35:43 -0700
Air entrapment in pastes	Michael Fenner	15 Dec 95 18:46:07 EST
RE: Alternative to electroless copper	Erratic Jackets!	Thu, 10 Aug 95 13:32:09 EDT
Alternative to electroless copper	<>	Thu, 10 Aug 1995 09:08:22 MST
ALUMINUM COATED PCB	Crawford, John A.	Wed, 26 Apr 95 10:22:00 EST
Re: ALUMINUM COATED PCB	Ken Gilleo	Wed, 26 Apr 1995 15:14:42 -0400 (EDT)
Re: Anode baskets for Acid Copper plating	Lee Bab Kieng	Tue, 19 Sep 1995 07:03:17 +0800 (SST)
Re: Anode baskets for Acid Copper plating	Andrew P Magee	Fri, 15 Sep 95 09:56 EST
Re: Anode baskets for Acid Copper plating	<>	Thu, 14 Sep 95 17:19:18 EST
Anode baskets for Acid Copper plating	<>	Mon, 11 Sep 1995 16:01:58 -0700
Re: ANSI Standards	Mike Buetow	Tue, 15 Aug 1995 15:34:32 -0500 (CDT)
ANSI Standards	Thole, Lothar	Mon, 14 Aug 1995 18:03 WAT
Re: Apology	<>	Wed, 13 Sep 1995 17:48:16 -0400
Apology	Melinda Robinson	Wed, 13 Sep 1995 15:41:56 -0500 (CDT)
Append To TechNet By AT&T	Jay Edwards	Thu, 8 Jun 95 13:38:27 EDT
Re: Aramid Base Materials	<>	Tue, 3 Oct 1995 07:28:27 -0400
Aramid Base Materials	<>	Sun, 1 Oct 1995 11:12:48 -0400
Assembly FAQ's	Robert Willis	23 Sep 95 04:47:12 EDT
ASTM Standards	Leila Hady	Fri, 11 Aug 1995 12:30:24 -0500 (CDT)
automatic printers	<>	Wed, 22 Nov 1995 06:47:09 EST
available forums and bulletin boards	<>	Fri, 08 Sep 95 19:05:53 EST
available used CNC Driller / Routers	THOMAS SMITH	13 Oct 95 01:03:53 EDT
Back heating	<>	Mon, 11 Sep 1995 16:57:04 -0500
Backpanel	Thorson, Kevin J @EAG	Tue, 25 Apr 95 15:30:00 CST
Re: BAKE TIME	R_R_HOLMES	9 May 95 13:48:48 -0400
BAKE TIME	<>	Tue, 09 May 95 11:04:00 CST
Re: BAKE TIME (fwd)	<>	Fri, 12 May 95 15:45:49 EST
Re: BAKE TIME (fwd)	Jon Holmen	Tue, 9 May 1995 13:01:41 -0500 (CDT)
Baking of Boards	geiland	Wed, 10 May 95 13:00:45 CST
Ball Grid Array	Ofer Segal	Thu, 17 Aug 95 17:26:50 EST
Ball Grid Array Vibration Reliability	Thorson, Kevin J @EAG	Tue, 25 Apr 95 16:02:00 CST
Ball Grid Arrey	Ofer Segal	Tue, 15 Aug 95 16:06:30 EST
Base material shortages	<>	Thu, 21 Sep 1995 07:49:38 -0400
Bellcore - connector lubricants	Jerry Cupples	Wed, 25 Oct 1995 15:55:04 -0500
benchmark/salary	Brian R Oatman	Thu, 24 Aug 1995 15:03:34 -0700
BGA & CGA Licensing	Ken Selk	28 Sep 1995 18:34:03 -0700
BGA Information	Robert Willis	06 Jul 95 14:46:34 EDT
Re: BGA rework	Usergroup	Mon, 27 Nov 95 13:19:55
BGA Rework	Dennis Measor	Thu, 13 Jul 95 17:04:40 EST
BGA TECHNOLOGY	Jim Marsico	Mon, 24 Jul 95 15:14:01 -0400
FW: BGA Test Manf. Samples	Crawford, John A.	Wed, 13 Sep 95 13:05:00 EST
BGA Test Manf. Samples	Thorson, Kevin J @EAG	Mon, 14 Aug 95 16:38:00 CST
BGA X-ray video	Robert Willis	22 Sep 95 03:31:30 EDT
Re: Blind vias	<>	Tue, 10 Oct 1995 08:51:01 -0400
Re: Blind vias	Neil Sellars	Tue, 10 Oct 95 10:13:30 PDT
Blind vias	<>	Mon, 9 Oct 1995 14:53:43 -0400
fwd: Board House Referrals	Stanley Kulak	17 Aug 95 15:45:13 EDT
Board House Referrals	<>	Thu, 17 Aug 95 15:03:55 EST
RE: Board House Referrals	<>	Thu, 17 Aug 95 13:18:39 CDT
Board House Referrals	Chester Lao - Process Engineer	Thu, 17 Aug 1995 11:12:50 -0600 (CST)
Re: Buried Resistors and their tolere	<>	Wed, 16 Aug 95 16:04:29 EST
Re: Buried Resistors and their tolere	Robert Blomstrom	Wed, 16 Aug 95 13:59:21 EDT
Buried Resistors and their tolere	Mitra Geeban	Wed, 16 Aug 95 10:11:52 -0400
Re[2]: Burp Cycle!	<>	Thu, 19 Oct 95 08:32:15 EST
Re: Burp Cycle!	<>	Tue, 17 Oct 1995 19:07:26 -0400
Re[3]: Burp Cycle!	<>	Tue, 17 Oct 95 16:15:03 EST
Re[2]: Burp Cycle!	<>	Tue, 17 Oct 95 09:01:48 MST
Re: Burp Cycle!	hbrown	Tue, 17 Oct 95 08:34:53 PST
Re: Burp Cycle!	<>	Mon, 16 Oct 95 17:03:10 EST
Burp Cycle!	Brian R Oatman	Sun, 15 Oct 1995 08:43:12 -0700
C4 DIE ATTACH	Jim Marsico	Tue, 12 Sep 95 12:29:01 -0400
Re[2]: Cable and Mechanical Workmanship Standards	<>	Fri, 20 Oct 95 17:37:46 PST
Re: Cable and Mechanical Workmanship Standards	<>	Fri, 20 Oct 95 07:20:45 CST
Re: Cable and Mechanical Workmanship Standards	Bill Gaines B160 x2199	Thu, 19 Oct 95 16:39:42 PDT
Re: Cable and Mechanical Workmanship Standards	Jon Holmen	Thu, 19 Oct 1995 14:25:08 -0500 (CDT)
Cable and Mechanical Workmanship Standards	Barry Allen, Manufacturing Eng.	Thu, 19 Oct 1995 11:43:21 -0600
Cable requirements	<>	Mon, 23 Oct 95 11:26:10 PST
Re: cad artwork output	ScicardsR user id	Wed, 11 Oct 95 13:09:49 EDT
Calculating Annular Ring	<>	Tue, 29 Aug 95 19:20:35 EST
Calculating Annular Ring	TOM HYBISKE	Tue, 29 Aug 1995 11:55:24
Call for Papers	Kimberly Sterling	Wed, 22 Nov 1995 15:14:11 -0600 (CST)
Re: Calling all Salesmen NO	dmitchel	Tue, 14 Nov 95 11:19:37 PST
Re: Camera - High Magnification	<>	Fri, 13 Oct 95 13:56:42 dst
Camera - High Magnification	<>	Wed, 11 Oct 95 09:45:55 CDT
Re: Cancelled mil specs... reac	Cadence User Account	Fri, 1 Sep 95 16:46:59 PDT
Re: Cancelled mil specs... reac	<>	Mon, 28 Aug 1995 12:56:13 -0400
Cancelled mil specs... reac	LISA GREENLEAF	28 Aug 1995 08:22:10 -0500
RE: CAPACITOR SIZE	<>	Wed, 16 Aug 95 10:43:30 CDT
CAPACITOR SIZE	Jim Marsico	Wed, 16 Aug 95 12:56:01 -0400
Re[2]: capacitor soldering	bwooldri	Wed, 10 May 95 17:35:50 CST
Re: capacitor soldering	Pat McGuine	Wed, 10 May 1995 17:15:13 -0500
Re: capacitor soldering	Jon Holmen	Wed, 10 May 1995 14:57:47 -0500 (CDT)
capacitor soldering	<>	Wed, 10 May 95 12:46:05 cst
CATCH-666	Al Slagle	Mon, 30 Oct 95 14:26:50 MST
Fwd: Cencorp 540 PCB Depaneling Shear Wanted ! !	<>	Sat, 2 Dec 1995 10:51:04 -0500
Ceramic Capacitor Stress Cracking	Cian O Mathuna	Wed, 15 Nov 1995 13:21:35 +0000
Ceramic Passives on FR4	Rory Doyle	Thu, 25 May 1995 17:54:16 +0000
CFC Cleaning Alternatives	Crawford, John A.	Mon, 11 Dec 95 10:17:00 EST
CFP: European Surface Mount Conference	Peter Swanson	Fri, 25 Aug 1995 18:50:50 GMT
Re: Chapter and verse on welded repairs to PWB outers.	ScicardsR user id	Mon, 6 Nov 95 16:17:00 EST
Chesapeake Chapter IPC Meeting	Joe Moltz	Mon, 18 Sep 1995 09:27:25 -0400
Chesapeake IPC Directions	pdemaree	Mon, 18 Sep 95 11:23:00 PDT
Re: chip-scale attachement	Mike Buetow	Wed, 16 Aug 1995 10:42:28 -0500 (CDT)
Re: chip-scale attachement	Michael Alderete	Sun, 13 Aug 95 09:20:11 PST
Re: chip-scale attachement	Michael Alderete	Sun, 13 Aug 95 10:41:04 PST
chip-scale attachement	ScicardsR user id	Thu, 10 Aug 95 14:52:55 EDT
Re[2]: Circuit Board Newsgroup - alt.electronics.manufacture	Usergroup	Thu, 30 Nov 95 13:36:42
Re[2]: Circuit Board Newsgroup - alt.electronics.manufacture	Usergroup	Mon, 27 Nov 95 13:10:00
Re: Circuit Board Newsgroup - alt.electronics.manufacture.circuitboa	<>	Wed, 22 Nov 1995 09:19:02 -0500
Circuit Board Newsgroup - alt.electronics.manufacture.circuitboa	Keith Birchfield (Secondary)	Tue, 21 Nov 1995 09:01:44 +0000
Circuit Repair	<>	Thu, 27 Jul 95 10:50:47 EST
Circuit Repair	Harry Parkinson DTN 264-6760	Thu, 27 Jul 95 09:24:14 EDT
circuit repair	Robert Blomstrom	Thu, 27 Jul 95 08:49:11 EDT
Re: Circuit Repair	<>	Wed, 26 Jul 95 17:57:11
Re: Circuit Repair	<>	Wed, 26 Jul 95 16:53:49
Re: Circuit Repair	Dean Barham, x3805/p-0217	Wed, 26 Jul 1995 19:38:30 -0500 (EST)
Circuit Repair	Scott M. Severson	Wed, 26 Jul 95 16:14:00 -0600
CircuiTree info	<>	Sat, 28 Oct 95 14:30:23 PST
CircuiTree info.	<>	Mon, 30 Oct 1995 19:35:56 -0500
CircuitWorld Web Site	Robert Bormann	Sun, 11 Jun 95 20:02:19 PDT
Re[2]: Clarification ; Solder balls	Kenneth R Kirby	Wed, 06 Dec 95 11:23:00 PST
Re: Clarification ; Solder balls	Robert Willis	06 Dec 95 04:02:56 EST
Re: Clarification ; Solder balls	denise rooke	Mon, 4 Dec 1995 23:24:05 -0500 (EST)
Clean Rooms	David Bergman	Fri, 7 Jul 1995 15:47:19 -0500 (CDT)
Cleaning of Roger's Duriod 6002/6010 Material	Michael Fenner	23 Nov 95 19:07:31 EST
Re: Cleaning of Roger's Duriod 6002/6010 Material	<>	Wed, 22 Nov 1995 10:42:01 -0500
Re: Cleaning of Roger's Duriod 6002/6010 Material	<>	Tue, 21 Nov 95 13:55:25 EST
Cleaning of Roger's Duriod 6002/6010 Material	JWeiss	21 Nov 1995 10:57:10 EST
Cleaning PCBd's prior to Conformal Coat	Richard Ackerson	Fri, 12 May 95 12:53:33 EDT
Cleaning Rogers Duriod	Michael Fenner	29 Nov 95 19:38:48 EST
Cleaning Survey Results 91-94	Robert Willis	09 Dec 95 05:36:30 EST
Re: CLEANLINESS CORRELATION	John Nelson	Tue, 26 Sep 1995 11:56:40 -0400 (EDT)
CLEANLINESS CORRELATION	Jim Marsico	Tue, 26 Sep 95 14:08:01 -0400
Re: Cleanliness testing with Omegameter as a contract manufa	<>	Sat, 21 Oct 95 15:58:12
Re: Cleanliness testing with Omegameter as a contract manufacturer	<>	Mon, 23 Oct 1995 10:48:12 -0400
Cleanliness testing with Omegameter as a contract manufacturer	Leo Reynolds	Sat, 21 Oct 1995 07:59:34 -0700
Re: Component lead attachment	<>	Wed, 04 Oct 95 09:52:34 dst
Component lead attachment	Phil Belliveau	Mon, 02 Oct 95 16:17:23
RE: Component Lead Tinning	Crawford, John A.	Tue, 10 Oct 95 08:53:00 EST
Re[2]: Component Lead Tinning	<>	Mon, 9 Oct 1995 10:04:04 -0500
RE: Component Lead Tinning	Jim Marsico	Fri, 06 Oct 95 19:23:01 -0400
Re: Component Lead Tinning	Jerry Cupples	Thu, 5 Oct 1995 19:17:08 -0500
Component Lead Tinning	<>	Thu, 5 Oct 1995 17:30:28 -0500
Component outgassing	Mike Buetow	Wed, 16 Aug 1995 17:35:48 -0500 (CDT)
Component Shortage	<>	Mon, 02 Oct 95 08:33:34 EST
Re[2]: COMPONENT TRENDS	<>	Thu, 25 May 95 17:23:15
Re: COMPONENT TRENDS	Hopkins, Reed	Thu, 25 May 95 14:10:30
Component Trends	Kimberly Sterling	Thu, 25 May 1995 10:22:08 -0500 (CDT)
COMPONENT TRENDS	Jim Marsico	Thu, 25 May 95 11:55:01 -0400
Re: Component Trends; Re:	Michael Alderete	Tue, 30 May 95 13:45:04 PST
Conductive adhesives	Michael Fenner	18 Oct 95 16:23:54 EDT
conductive adhesives	Michael Fenner	12 Oct 95 18:06:34 EDT
Re: conductive adhesives	Ken Gilleo	Wed, 11 Oct 1995 13:48:12 -0400 (EDT)
Re: conductive adhesives	David Christopher Whalley	Wed, 11 Oct 95 16:36:52 bst
conductive adhesives	Mitch Austin	Tue, 10 Oct 95 16:59:54 CDT
Re: conductive adhesives???	David Christopher Whalley	Mon, 16 Oct 95 12:22:11 bst
Re: conductive adhesives???	Ken Gilleo	Fri, 13 Oct 1995 07:56:50 -0400 (EDT)
Re: Conductive Epoxy	John Nelson	Thu, 21 Dec 1995 07:45:19 -0500 (EST)
Re: Conductive Epoxy	dmitchel	Wed, 20 Dec 95 14:34:49 PST
Conductive Epoxy	Charles Barker/IO-US	20 Dec 95 16:07:59
Re: Conductor Peel Strength -- Teflon PWB's	David Bergman	Tue, 27 Jun 1995 11:28:28 -0500 (CDT)
Conductor Peel Strength -- Teflon PWB's	<>	Mon, 26 Jun 1995 16:16:55 MST
Re: Conductor Width	KNAPP, CLARENCE W. WH:2478	Wed, 4 Oct 95 14:23:24 -0700
Re: Conductor Width Measurement	Jerry Cupples	Thu, 5 Oct 1995 11:31:40 -0500
Re: Conductor Width Measurement	<>	Thu, 05 Oct 95 11:51:26 EST
Re: Conductor Width Measurement	ScicardsR user id	Thu, 5 Oct 95 06:50:54 EDT
Re: Conductor Width Measurement	Vivian Vosburg	Wed, 4 Oct 1995 14:51:46 -0500 (CDT)
Conductor Width Measurement	Jim McNeal	Wed, 04 Oct 1995 11:40:37 -0500
conferences	Mitra Geeban	Thu, 10 Aug 95 08:48:56 -0400
Re: conferences	Mike Buetow	Thu, 10 Aug 1995 10:19:08 -0500 (CDT)
Re: conferences (fwd)	Mike Buetow	Thu, 10 Aug 1995 11:44:35 -0500 (CDT)
Re: Conformal coat PC-101	<>	Mon, 23 Oct 95 19:34:03 PST
Conformal coat PC-101	Jeffery L. Hempton	Sun, 22 Oct 1995 08:45:23 -0500
Re: CONNECTOR LUBRICATION METHODS	Jerry Cupples	Fri, 20 Oct 1995 14:24:32 -0500
Re: CONNECTOR LUBRICATION METHODS	Terry Davey	Fri, 20 Oct 1995 18:26:12 +0100
Re: CONNECTOR LUBRICATION METHODS	Jerry Cupples	Fri, 20 Oct 1995 10:54:49 -0500
CONNECTOR LUBRICATION METHODS	AMARKUS	Thu, 19 Oct 95 20:23:29 CST
Re: Connector Placement	Dwight Mattix (Dwight Mattix)	Fri, 15 Dec 1995 11:01:01 -0800 (PST)
Re: Consultant wanted	<>	Fri, 27 Oct 1995 10:07:12 -0400
Re: Consultant wanted	<>	Fri, 27 Oct 1995 00:10:17 -0400
Re: Consultant wanted	<>	Thu, 26 Oct 1995 22:11:15 -0400
Consultant wanted	<>	Wed, 25 Oct 1995 21:31:33 -0400
Re: Consultant wanted	<>	Thu, 26 Oct 1995 14:37:09 -0400
CONSULTANTS NEEDED or WANTED	Robert Willis	29 Oct 95 05:38:53 EST
Re: CONSULTANTS NEEDED or WANTED - - to robt willis	<>	Sun, 29 Oct 1995 13:56:48 -0500
CONSULTANTS WANTED	Bernard Kessler & Associates LTD	Thu, 26 Oct 95 18:10 EST
Re: Contacts Needed	David Christopher Whalley	Thu, 11 May 95 18:05:11 bst
re: Contacts needed	Jim Marsico	Thu, 11 May 95 16:58:01 -0400
Contacts Needed	Pat McGuine	Thu, 11 May 1995 09:54:39 -0500
controlled impedance	Mitch Austin	Mon, 10 Jul 95 09:23:07 CDT
Re: Controlled Impedance	R_R_HOLMES	10 Jul 95 08:32:09 -0400
Re: Controlled Impedance	<>	Sat, 8 Jul 1995 23:08:41 -0400
Re: Controlled Impedance	<>	Sat, 08 Jul 95 07:23:20 EST
Re: Controlled Impedance	<>	Fri, 07 Jul 95 16:25:08 EST
Controlled Impedance	Michael Alderete	Fri, 07 Jul 95 11:48:00 PST
Controlled Impedance	BOB SMITH	Fri, 7 Jul 95 12:31:46 edt
Re: Controlled Impedence-Teflon	David Bergman	Fri, 1 Sep 1995 13:06:06 -0500 (CDT)
Re: Controlled Impedence-Teflon	<>	Thu, 31 Aug 1995 20:48:23 -0400
Controlled Impedence-Teflon	<>	Tue, 22 Aug 95 13:04:09 PDT
Convert from P-55110	Jack Holm	Thu, 11 May 95 14:57:42 CDT
Copper Core PWB Assembly	APeder01	16 Aug 1995 09:02:09 EST
RE: Copper Core PWB Assembly (fwd)	Leila Hady	Fri, 18 Aug 1995 12:16:54 -0500 (CDT)
Re: Copper Cored PWA Assembly	Letsinger, John F.	Fri, 18 Aug 95 13:24:00 EST
Copper thickness Gauges	<>	Mon, 10 Jul 95 16:43:18 PDT
Copper thickness instrument	<>	Mon, 10 Jul 95 13:09:52 PDT
Re: copper-at-edge	<>	Tue, 28 Nov 1995 13:14:11 -0500
Re: copper-at-edge	Karl J. Bates	Mon, 27 Nov 95 10:37:06 CST
Re: copper-at-edge	Al Slagle	Mon, 27 Nov 95 07:52:41 MST
Re: copper-at-edge	ScicardsR user id	Mon, 27 Nov 95 08:36:04 EST
copper-at-edge	Al Slagle	Tue, 21 Nov 95 14:10:18 MST
Re: Copy of: Solder Resist Cure Test	<>	Mon, 5 Jun 1995 11:01:42 -0400
Re: Copy of: Solder Resist Cure Test	David Christopher Whalley	Mon, 5 Jun 95 10:46:04 bst
Copy of: Solder Resist Cure Test	Robert Willis	04 Jun 95 13:22:01 EDT
cost of OPC vs HASL	Keith Lumley	Wed, 13 Sep 1995 13:05:57 -0400
RE: cost of OSP vs HASL PWB coating	Stuber, Chuck	Tue, 12 Sep 95 20:03:00 EDT
RE: cost of OSP vs HASL PWB coating	Jerry Cupples	Tue, 12 Sep 1995 12:21:50 -0500
RE: cost of OSP vs HASL PWB coating	Stuber, Chuck	Mon, 11 Sep 95 20:05:00 EDT
cost of OSP vs HASL PWB coating	Jerry Cupples	Mon, 11 Sep 1995 17:55:05 -0500
Re: Cracked MLC capacitors.	<>	Wed, 20 Dec 95 12:23:30 CST
Re: Cracking Capacitors	<>	Mon, 18 Dec 1995 16:32:59 -1000
Cracking Capacitors	<>	Mon, 18 Dec 1995 11:39:38 -0500
Cracking of Type XR7 Multilayer Capacitors	PETER H. COTE	20 Dec 1995 11:52:57 -0500
Cracking of X7R capacitors.	Mickey Weiner (2937)	Wed, 20 Dec 1995 09:10:22 +0200 (IST)
RE: Cracking X7R capacitors	Daniel F. Shea 2-2410	Mon, 18 Dec 95 09:27:25 est
Cracking X7R capacitors	Phoenix International	Fri, 15 Dec 1995 11:34:57 -0600 (CST)
RE: Crop marks	Bob Smith - Foxboro Co	Tue, 31 Oct 95 10:41:44 est
Crop marks	Al Slagle	Mon, 30 Oct 95 10:59:55 MST
Re: CSA, and European Safety requirements	<>	Tue, 29 Aug 1995 09:02:16 -0400
CSA, and European Safety requirements	hbrown	Mon, 28 Aug 95 15:07:52 PST
CTE Values for PWB	<>	Wed, 06 Dec 95 12:37:45 EST
Re: CTE Values of Printed Circuit Board and Heatsink combina	John Burke	Tue, 31 Oct 95 16:34:14 GMT
CTE Values of Printed Circuit Board and Heatsink combinations	Jim Faris	Tue, 31 Oct 95 8:54:19 EST
Re: Current Carrying Capacity of traces and vias	Jeff Deeney	Mon, 15 May 95 15:53:39 MDT
Current Carrying Capacity of traces and vias	Thad McMillan	Fri, 12 May 95 10:25:04 CST
Re: Current Revs of some IPC Docs	David Bergman	Mon, 11 Sep 1995 08:48:58 -0500 (CDT)
Current Revs of some IPC Docs	Pat McGuine	Fri, 08 Sep 1995 18:16:26 -0500
Re: DATE CODES	<>	Sat, 2 Sep 1995 16:14:32 -0400
DATE CODES	<>	Sat, 02 Sep 95 00:32:54 EST
DATE CODES	<>	Sat, 02 Sep 95 00:32:41 EST
Re: DATE CODES	David Bergman	Fri, 1 Sep 1995 11:47:23 -0500 (CDT)
DATE CODES	<>	Tue, 29 Aug 95 12:40:34 CST
DATE CODES	<>	Tue, 29 Aug 95 07:32:00 CST
Defluxing complex electroni	Mary Davis	26 Apr 1995 15:09:20 -0600
Re: Defluxing Electronic Assemblies	Jim Marsico	Thu, 27 Apr 95 11:40:01 -0400
Re: delamination	<>	Tue, 10 Oct 1995 14:57:59 -0400
Re: delamination	Jerry Cupples	Mon, 9 Oct 1995 21:25:27 -0500
Re: delamination	David Bergman	Tue, 10 Oct 1995 08:12:03 -0500 (CDT)
delamination	Mike Cussen	Mon, 9 Oct 95 17:30 EDT
Re: Delamination/baking boards	Robert Willis	21 Oct 95 08:51:10 EDT
Re: Delamination/baking boards	Jerry Cupples	Thu, 19 Oct 1995 08:10:52 -0500
Delamination/baking boards	Robert Willis	18 Oct 95 12:34:41 EDT
Re: Delamination/baking boards	Jerry Cupples	Thu, 12 Oct 1995 16:05:30 -0500
Delamination/baking boards	MR NORMAN S EINARSON	Wed, 11 Oct 1995 16:57:47 EDT
Re: Delamination/response	Jerry Cupples	Sun, 15 Oct 1995 23:30:04 -0500
Re: Delamination/response	BWOOLDRI	Mon, 16 Oct 95 10:23:24 CST
Delamination/response	MR NORMAN S EINARSON	Sat, 14 Oct 1995 14:28:43 EDT
dendritic growth	<>	Fri, 6 Oct 1995 22:08:14 -0400
Re: Dendritic Growth?	<>	Thu, 12 Oct 1995 08:35:17 -0400
Re: Dendritic Growth?	Mitch Austin	Tue, 10 Oct 95 14:28:52 CDT
Re[2]: Dendritic Growth?	Andrew P Magee	Mon, 9 Oct 95 13:15 EST
Re: Dendritic Growth?	Jerry Cupples	Mon, 9 Oct 1995 13:16:37 -0500
Re: Dendritic Growth?	<>	Mon, 09 Oct 95 07:55:21 EST
Re: Dendritic Growth?	Andrew P Magee	Fri, 6 Oct 95 19:07 EST
Dendritic Growth?	<>	Fri, 6 Oct 95 16:05:01 CDT
Design & Documentation Trouble-Shooting	Vivian Vosburg	Tue, 12 Sep 1995 15:44:12 -0500 (CDT)
Re: designed line width/spacing vs finished board.	David Christopher Whalley	Mon, 23 Oct 95 16:00:20 gmt
designed line width/spacing vs finished board.	Robert Blomstrom	Thu, 19 Oct 95 14:59:24 EDT
Dielectric Breakdown BTW Conductors	<>	Wed, 25 Oct 95 13:05:11 EST
Dielectric Constant variation	George Wheadon	14 May 95 05:25:14 EDT
Re: Dielectric Constant variation	<>	Thu, 11 May 1995 15:06:24 -0400
Dielectric Constant variation	Thole, Lothar	Thu, 11 May 1995 10:16 WAT
Re: difficult soldering on OPC bare copper boards	Luke Mendoza	Tue, 3 Oct 1995 05:34:38 +0800
Re: difficult soldering on OPC bare copper boards	Michael Barmuta	Fri, 25 Aug 1995 09:13:09 DST
Re: difficult soldering on OPC bare copper boards	Thad McMillan	Sun, 20 Aug 95 21:35:12 CST
Re: difficult soldering on OPC bare copper boards	<>	Sat, 19 Aug 1995 12:09:12 -0400
difficult soldering on OPC bare copper boards	<>	Fri, 18 Aug 95 17:59:03 PST
Re: DIL component conversion to a surface mount leadform	Jeff Deeney	Tue, 29 Aug 95 10:07:25 MDT
Re: DIL component conversion to a surface mount leadform	brendan mccormack	Tue, 29 Aug 1995 12:09:24 +0100 (WET DST)
DIL component conversion to a surface mount leadform	Neil Sellars	Thu, 24 Aug 95 08:13:59 BST
Re[2]: dimensional stability	<>	Thu, 14 Dec 95 11:01:31 EST
Re: dimensional stability	<>	Wed, 13 Dec 1995 22:13:09 -0500
Re: dimensional stability	<>	Wed, 13 Dec 95 17:02:15 EST
dimensional stability	R_R_HOLMES	13 Dec 95 12:15:42 -0500
Direct connection of vias to Gnd	<>	Tue, 12 Dec 1995 23:13:44 -0500 (EST)
Direct connection of vias to Gnd	Steve Quinn	Tue, 12 Dec 1995 15:57:50 -0600
RE: Does Spec Exist?	KNAPP, CLARENCE W. WH:2478	Wed, 02 Aug 95 17:17
Re: Does this spec exsist?	Jon Holmen	Wed, 2 Aug 1995 15:02:07 -0500 (CDT)
Does this spec exsist?	Andy Richardson	Wed, 02 Aug 1995 08:23:43 GMT
Re: Double Treated Copper vs. Standard (Not Black) Oxide(s)	dmitchel	Wed, 15 Nov 95 08:41:21 PST
re: DRC	mike gnieski	Fri, 20 Oct 95 13:43:01 EDT
Re: DRC	Robert Blomstrom	Fri, 20 Oct 95 12:04:14 EDT
DRC	Al Slagle	Fri, 20 Oct 95 08:52:19 MDT
RE: DRC, Netlist Testing, ...	Silbert, Steve	Tue, 24 Oct 95 17:31:00 EDT
E-mail address for Laura Turbini	<>	Thu, 14 Sep 95 16:32:28 EDT
Electroless Ni	Robert Willis	26 Aug 95 05:36:26 EDT
Electroless Ni	Lee Bab Kieng	Sat, 26 Aug 1995 07:19:20 +0800 (SST)
Electroless Ni/Au Self-life	<>	Fri, 2 Jun 1995 11:50:37 -0400
Re: Re[3]: Electroless plating	<>	Fri, 17 Nov 1995 22:30:45 -0500
Re[3]: Electroless plating	<>	Fri, 17 Nov 95 17:01:05 EST
Employment Opportunities	<>	Thu, 19 Oct 1995 18:11:57 -0500
Employment Opportunities	<>	Thu, 19 Oct 95 12:28:13 EST
EMPLOYMENT OPPORTUNITIES	Mike Huffman	Tue, 2 May 95 11:37:38 EDT
Employment Opportunity	Lehighton Electronics, Inc.	Mon, 30 Oct 1995 13:21:15 -0500
Employment opportunity	Sid Tryzbiak	Tue, 24 Oct 1995 14:03:51 -0400
Employment Opportunity	<>	Fri, 20 Oct 1995 15:37:56 -0500
Employment Opportunity	Jesse, Ed	Fri, 20 Oct 95 08:51:00 EST
Employment Opportunity	Maureen Mathis	Mon, 01 May 95 16:46:15 EST
Re: encapsulant process	David Christopher Whalley	Thu, 4 May 95 18:30:38 bst
encapsulant process	Mitch Austin	Wed, 3 May 95 10:46:15 CDT
Re: Enthone DSR 3241 Solder Mask	geiland	Mon, 08 May 95 13:45:31 CST
Re: Enthone DSR 3241 Solder Mask	jyoung	Fri, 05 May 95 14:53:59 PST
Enthone DSR 3241 Solder Mask	<>	Thu, 04 May 95 16:06:43 EDT
EOS/ESD Failure Analysis	<>	Wed, 30 Aug 1995 16:28:41 -0500
EPA RELEASES HWIR PROPOSAL	Christopher Rhodes	Wed, 22 Nov 1995 12:02:22 -0600 (CST)
Epoxy Hard Cap Process	Luke Mendoza	Wed, 9 Aug 1995 14:37:31 +0800
ESD functional test standards	Mitch Austin	Fri, 13 Oct 95 08:51:49 CDT
ESD protection ... (fwd)	Leila Hady	Fri, 8 Sep 1995 15:41:52 -0500 (CDT)
Re: ESD Protection requirements	Jerry Cupples	Thu, 7 Dec 1995 11:41:09 -0600
Re: ESD Protection requirements	Jon Holmen	Thu, 7 Dec 1995 11:05:20 -0600 (CST)
ESD Protection requirements	Britt, Jim (FL40)	Thu, 07 Dec 1995 09:03:00 -0800 (PST)
Fwd:re: Re: Etchback	<>	Fri, 1 Dec 95 14:44:32 PST
Re: Etchback	Jon Holmen	Fri, 1 Dec 1995 09:43:02 -0600 (CST)
Etchback	Fouquet, Alain	Tue, 21 Nov 1995 16:33:00 -0500 (EST)
Etchback	MR DOUGLAS C JEFFERY	Sun, 22 Oct 1995 06:43:42 EDT
Re: European "CE" Markings	<>	Thu, 19 Oct 1995 04:56:48 -0400
European "CE" Markings	Crawford, John A.	Tue, 10 Oct 95 10:32:00 EST
Re: Exacta Circuits / laminates	<>	Fri, 11 Aug 95 21:42:05
Exacta Circuits / laminates	Robert Blomstrom	Fri, 11 Aug 95 16:52:05 EDT
Excessive curing	MR DAVID E MANDER	Thu, 13 Jul 1995 10:32:00 EDT
Re: EXCESSIVE CURING OF SOLDER MASK OVER FR4	<>	Thu, 13 Jul 1995 13:47:48 -0400
Re: EXCESSIVE CURING OF SOLDER MASK OVER FR4	R_R_HOLMES	12 Jul 95 15:28:26 -0400
EXCESSIVE CURING OF SOLDER MASK OVER FR4	Fred Paul	Mon, 10 Jul 1995 08:02:17 DST
EXPOSE COPPER	Augustine Li	Mon, 21 Aug 95 5:13:45 MDT
Facility tour, Los Angles area, 4 Oct 95, electronic packaging	Bill Gaines B160 x2199	Tue, 26 Sep 95 08:33:11 PDT
Feeds and speeds	<>	Sat, 26 Aug 95 19:37 EDT
Film Area Calculator NO	Robert C Hunt	Wed, 11 Oct 1995 15:50:00 -0700 (PDT)
FINAL CLEAN	<>	Tue, 02 May 95 10:16:31 EST
final clean equipment after rout	<>	Wed, 3 May 1995 23:03:28 -0400
Fine pitch and re-reflow	Harry Parkinson DTN 264-6760 05-Jul-1995 1437	Wed, 5 Jul 95 14:39:00 EDT
Re: Fine Pitch SMT Mods	Bill Gaines B160 x2199	Wed, 20 Sep 95 07:58:46 PDT
Re: Fine Pitch SMT Mods	Jerry Cupples	Tue, 19 Sep 1995 14:08:04 -0500
Re: Fine Pitch SMT Mods	Moffitt, James H.	Tue, 19 Sep 95 12:01:00 EST
RE: Fine Pitch SMT mods	Jim Marsico	Mon, 18 Sep 95 17:15:01 -0400
Re: Fine Pitch SMT mods	Jerry Cupples	Mon, 18 Sep 1995 11:05:53 -0500
Re: Fine Pitch SMT mods	Evaltine	Sat, 16 Sep 1995 20:00:12 -0400 (EDT)
Fine Pitch SMT mods	Robert Willis	16 Sep 95 02:58:08 EDT
Fine Pitch SMT mods	Kevin Ditondo	Fri, 15 Sep 95 08:37:41 EDT
Re: Flex Circuit Specs	<>	Sat, 21 Oct 1995 09:49:09 -0400
RE: Flex Circuit Specs	Cavin Clif	Fri, 20 Oct 95 13:13:00 MST
Re: Flex Circuit Specs	David Bergman	Fri, 20 Oct 1995 15:24:22 -0500 (CDT)
Flex Circuit Specs	<>	Fri, 20 Oct 95 12:21:05 MDT
Re: Flex Processing Frame	Andrew P Magee	Fri, 22 Sep 95 10:15 EST
Flex Processing Frame	<>	Mon, 18 Sep 95 12:49:25 PDT
re: Flexible circuit laminate types.	<>	Fri, 22 Sep 95 09:14:02 PDT
Flexible circuit laminate types.	BOB HOENE	Fri, 22 Sep 1995 08:07:56 -0600
Re: FLUX & SOLDER PASTE QPL	David Bergman	Thu, 5 Oct 1995 12:43:28 -0500 (CDT)
FLUX & SOLDER PASTE QPL	Jim Marsico	Thu, 05 Oct 95 15:17:01 -0400
Re: Flux Amount	<>	Mon, 25 Sep 1995 09:45:28 -0400
Flux Amount	Robert Willis	22 Sep 95 12:55:38 EDT
RE: Flux Amount	Seppanen Gordy	21 Sep 1995 08:18:08 U
Flux Amount	<>	Wed, 20 Sep 95 15:07:52 EST
Re: Foil Lamination	<>	Thu, 21 Dec 1995 14:42:35 -0500
Foil Lamination	<>	Wed, 20 Dec 1995 19:19:55 -0500
Re: Foil Lamination	<>	Sat, 16 Dec 1995 11:01:11 -0500
Foil Lamination	APeder01	04 Dec 1995 11:02:11 EST
Re: Foil vs Component Lam.	<>	Tue, 05 Dec 95 15:18:12 EST
Foil vs Component Lam.	R_R_HOLMES	5 Dec 95 08:12:03 -0500
re: FR-4 vs FR-5	MR DAVID E MANDER	Fri, 08 Sep 1995 08:21:37 EDT
Re: FR2/CEM1 laminate properties	<>	Mon, 9 Oct 95 11:35:09 CDT
FR2/CEM1 laminate properties	David Christopher Whalley	Mon, 9 Oct 95 13:33:58 bst
Re: FR4 versus FR5	<>	Thu, 14 Sep 1995 10:08:28 -0400
Re: FR4 versus FR5	TOM HYBISKE	Thu, 07 Sep 1995 15:41:24
FR4 versus FR5	<>	Thu, 7 Sep 95 10:58:48 MDT
Fungus Test	BOB HAYNES	Fri, 30 Jun 1995 13:56:37
Fungus Test	Moffitt, James H.	Thu, 29 Jun 95 10:35:00 EST
FWD>RE>Defluxing complex el	Mary Davis	27 Apr 1995 12:13:18 -0600
General PCB Discussions	<>	Tue, 14 Nov 1995 11:50:31 +1100 (EST)
Re: General Questions	ScicardsR user id	Tue, 17 Oct 95 07:19:16 EDT
Re: General Questions	Richard Davidowsky	Mon, 16 Oct 1995 17:35:24 -700
General Questions	<>	Mon, 16 Oct 95 15:22:26 EST
RE: GETEK	Brian R Oatman	Fri, 01 Dec 1995 10:51:59 -0800
GETEK Material	Charlie Fleetwood	Fri, 1 Dec 95 07:22:35 MST
Gold coating of SMT pads	Guenter Grossmann	Wed, 6 Dec 1995 11:16:15 +0100
Gold Flash Coating	MR NORMAN S EINARSON	Wed, 06 Dec 1995 13:00:26 EST
Gold Flash Coating	Len Brown	Mon, 4 Dec 95 14:29:57 PST
Gold Flash Coating	Len Brown	Mon, 4 Dec 95 14:29:57 PST
RE: Gold Flash Coating	Crawford, John A.	Tue, 05 Dec 95 08:51:00 EST
Gold Flash Coating	Len Brown	Mon, 4 Dec 95 14:29:57 PST
Gold Solder	<>	Tue, 22 Aug 1995 16:34:40 -0500
Gold Thickness Requirements for Tabs	Steve Joy	Wed, 30 Aug 95 17:57:37 -0700
Gold Thickness Requirements for Tabs	<>	Thu, 31 Aug 95 13:09:14 EDT
Gold Thickness Requirements for Tabs	Steve Joy	Wed, 30 Aug 95 17:57:37 -0700
Gold Wire Bonding	<>	Tue, 19 Sep 95 12:01:52 EST
Re: HALOGEN/ANTIMONY-FREE COPPER LAMINATE	<>	Sat, 25 Nov 1995 09:45:32 -0500
HALOGEN/ANTIMONY-FREE COPPER LAMINATE	Christopher Rhodes	Wed, 15 Nov 1995 16:46:22 -0600 (CST)
Handling OSP coated PCB's....	Robert Willis	16 Sep 95 02:56:10 EDT
Handling OSP coated PCB's....	<>	Fri, 15 Sep 95 09:03:57
HASL thickness and scoring	<>	Fri, 27 Oct 95 17:27:36 EST
Re: HASL thickness and scoring	<>	Fri, 27 Oct 1995 15:17:48 -0400
HASL thickness and scoring	Chris Stack	Fri, 27 Oct 95 11:21:00
Re: HASL vs. Hot Oil Reflow	dmitchel	Wed, 15 Nov 95 12:34:16 PST
HASL/plate with Sn-Pb-Bi	<>	18 Sep 95 10:36:31 -0500
Re: Heat Dissapation	Mike McNulty	Fri, 13 Oct 1995 10:32:35 -0400
Help on DIN hardware!	Terry Huddleston	Tue, 5 Dec 1995 06:03:07 -0800
RE: Hiding component identification	Crawford, John A.	Fri, 20 Oct 95 10:54:00 EST
Hiding component identification	Phoenix International	Fri, 20 Oct 1995 07:50:35 -0500 (CDT)
High Frecuency PCB	LAB CIRCUITS	Wed, 18 Oct 95 21:24:35 0200
High Frequency PCB	Art Aguayo	Sun, 22 Oct 95 19:00 EST
High temperature flux	John Barrett	Mon, 4 Sep 1995 12:25:19 +0100 (WET DST)
Re: High Z Axis Expansion Board Materials	denise rooke	Tue, 5 Dec 1995 22:50:21 -0500 (EST)
Re: High Z Axis Expansion Board Materials	Martin Kennett, Design Engineer	Tue, 5 Dec 1995 12:47:28 -0600
Re: High Z Axis Expansion Board Materials	<>	Mon, 04 Dec 95 10:38:21 EST
Re: High Z Axis Expansion Board Materials	denise rooke	Sun, 3 Dec 1995 22:16:51 -0500 (EST)
Re: High Z Axis Expansion Board Materials	<>	Sun, 03 Dec 95 15:07:36 EST
High Z Axis Expansion Board Materials	<>	Sat, 2 Dec 1995 16:25:21 -0500
Re: Hole to board edge	<>	Sat, 28 Oct 1995 08:37:09 -0400
Re: Hole to board edge	Thomas Stewart	Fri, 27 Oct 1995 21:11:53 -0700 (PDT)
Re: Hole to board edge	<>	Fri, 27 Oct 1995 14:54:20 -0400
Hole to board edge	<>	Fri, 27 Oct 95 16:13:36 EST
Re[2]: Hole to board edge	Thad McMillan	Fri, 27 Oct 95 09:18:56 CST
Re[2]: Hole to board edge	<>	Fri, 27 Oct 95 10:29:15 EST
RE: Hole to board edge	<>	Fri, 27 Oct 95 08:44:58 EST
Re: Hole to board edge	<>	Fri, 27 Oct 1995 00:10:18 -0400
Hole to board edge	Thad McMillan	Thu, 26 Oct 95 14:48:48 CST
Re[2]: Hole to board edge -Reply	BOB HOENE	Fri, 27 Oct 1995 13:58:17 -0600
Housekeeping/Environment Requirements for PWB Fab	<>	Thu, 17 Aug 95 15:58:28 dst
Re: How do we compare?	<>	Wed, 25 Oct 95 11:18:07 EST
Re: How do we compare?	<>	Wed, 25 Oct 95 08:03:33 PST
How do we compare?	Al Slagle	Tue, 24 Oct 95 14:35:02 MDT
http://www.automata.com/ipc/technet1/msg00724.html	Jerry Cupples	Tue, 05 Sep 95 12:18:18 -2400
Re: Humidity/Temp Monitor for IC Dry Storage	<>	Tue, 28 Nov 1995 09:56:39 -0500
Humidity/Temp Monitor for IC Dry Storage	<>	Mon, 27 Nov 95 10:14:37 PST
Ideas for alloys for use in switch contact	<>	Tue, 22 Aug 95 09:48:31 PST
ILLINOIS DESIGNERS COUNCIL	Robinson, Peter	Tue, 10 Oct 1995 15:25:32 -0400
Re: Immersion gold	<>	Thu, 14 Sep 1995 21:15:10 -0400
Impedance test system	Ian McMilan	Wed, 16 Aug 1995 17:52:09 +800
re: Re: Importance of Drying	<>	Thu, 30 Nov 95 8:12:14 PST
Re: Importance of Drying	<>	Wed, 29 Nov 1995 22:53:38 -0500
Re: Importance of Drying	<>	Fri, 24 Nov 1995 22:47:17 -0500
RE: Importance of Drying	Crawford, John A.	Tue, 21 Nov 95 12:59:00 EST
Importance of Drying	<>	Mon, 20 Nov 1995 21:59:24 -0500
In-Line X-Ray Inspection Systems for Sol	<>	Wed, 24 May 95 18:22:00 PST
Industry Pricing Trends	MR NORMAN S EINARSON	Sun, 24 Sep 1995 13:52:45 EDT
Industry Pricing Trends	Steve Joy	Thu, 21 Sep 95 17:29:29 -0700
Information	WVITALIA	Fri, 18 Aug 95 15:54:56 est
Re: Information request	<>	Wed, 02 Aug 95 16:15:22 PST
Re: Information request	John F. Berkey	Wed, 2 Aug 1995 15:15:25 DST
Information request	John F. Berkey	Wed, 2 Aug 1995 15:00:20 DST
Insp. of Low Residue Hd. So	Mary Davis	25 Sep 1995 11:52:40 -0600
Intergraph and Massteck PCB Layout Editor	OMAR	Fri, 18 Aug 1995 16:18:40 -0700
RE: Interleaves and cleanroom NO	Andrew P Magee	Mon, 30 Oct 95 17:18 EST
Interleaves and cleanroom NO	Robert C Hunt	Fri, 27 Oct 1995 21:13:00 -0700 (PDT)
Re: Internal HTE Copper Foil	<>	Sat, 25 Nov 1995 23:31:29 -0500
Internal HTE Copper Foil	<>	Tue, 21 Nov 95 09:30:51 dst
Internal Registration	R_R_HOLMES	13 Sep 95 09:40:34 -0400
Internal Registration	R_R_HOLMES	2 Sep 95 10:38:28 -0400
International Glass Suppliers/Weavers	David Bergman	Thu, 14 Sep 1995 12:57:49 -0500 (CDT)
Internet Access Address for EMPF	David T. Novick	Mon, 21 Aug 95 14:45:38 PST
RE: Internet Access Address for EMPF (fwd)	Leila Hady	Wed, 6 Sep 1995 13:46:49 -0500 (CDT)
Interrupted forum services	Melinda Robinson	Mon, 4 Dec 1995 13:01:06 -0600 (CST)
Re[3]: Invisible Sender's Address	David T. Novick	Fri, 17 Nov 95 15:20:11 PST
Re[2]: Invisible Sender's Address	<>	Fri, 17 Nov 95 17:10:08 EST
Ionics and Adhesives	<>	Mon, 11 Sep 1995 14:49:58 -0400
Re: Ionics in adhesives/circuits (fwd)	Tom Cinque	Thu, 7 Sep 1995 17:14:39 -0400 (EDT)
Ionics in adhesives/circuits (fwd)	Smith, Joshua	7 Sep 1995 13:41:38 -0600
Re: IPC & MIL-STD specs	<>	Fri, 20 Oct 95 12:58:37 EST
IPC & MIL-STD specs	<>	Fri, 20 Oct 95 12:48:12 EST
IPC & MIL-STD specs	Miles Littlefield	19 Oct 95 20:16:01 EDT
fwd: IPC & MIL-STD specs	Nanci Baggett	Thu, 19 Oct 1995 15:23 CST
Re[2]: IPC & MIL-STD specs	FRANK, SHARI	Thu, 19 Oct 95 09:56:45 PST
Re: IPC & MIL-STD specs	Pat McGuine	Wed, 18 Oct 1995 15:39:26 -0500
IPC & MIL-STD specs	Ed Murphy	Wed, 18 Oct 1995 10:56:17 -0700
fwd: IPC & MIL-STD specs (fwd)	Vivian Vosburg	Tue, 12 Dec 1995 13:56:13 -0600 (CST)
RE: IPC & MIL-STD specs (fwd)	Leila Hady	Fri, 20 Oct 1995 15:58:19 -0500 (CDT)
Re: IPC 610 Posters	<>	Wed, 15 Nov 95 16:43:47
Re: IPC 610 QUESTION	Jon Holmen	Mon, 27 Nov 1995 14:40:25 -0600 (CST)
Re: IPC 610 QUESTION	Jerry Cupples	Wed, 22 Nov 1995 16:58:51 -0600
IPC 610 QUESTION	<>	Tue, 21 Nov 1995 12:53:36 -0600
IPC Ball Grid Array Symposium	Kimberly Sterling	Fri, 15 Dec 1995 13:36:03 -0600 (CST)
Re: IPC Design Guide	Mike Buetow	Wed, 20 Sep 1995 08:47:04 -0500 (CDT)
IPC Design Guide	Robert Willis	20 Sep 95 07:59:56 EDT
IPC Designers Conference and Exhibition	Kimberly Sterling	Mon, 30 Oct 1995 09:36:33 -0600 (CST)
IPC Designers Council Chesapeake Chapter Meeting	<>	Tue, 10 Oct 95 22:42:47 EST
IPC Designers Council Chesapeake Chapter Meeting Schedule	<>	Mon, 11 Sep 95 11:07:43 EST
Re: IPC Documents	David Bergman	Thu, 7 Sep 1995 12:24:28 -0500 (CDT)
IPC Documents	Jerry Galang	Thu, 7 Sep 95 09:13 PDT
IPC Fall meeting - Important Sessions!	David Bergman	Mon, 9 Oct 1995 16:36:00 -0500 (CDT)
Re: IPC Gold Spec	David Bergman	Sat, 27 May 1995 19:30:28 -0500 (CDT)
IPC Gold Spec	Joseph L Gangemi	Thu, 25 May 95 13:30:02 EDT
IPC on the WWW	David Bergman	Wed, 13 Dec 1995 17:59:26 -0600 (CST)
IPC Printed Circuits Expo	David Bergman	Wed, 20 Dec 1995 11:37:26 -0600 (CST)
Re: IPC SPECS	Mike Buetow	Wed, 24 May 1995 16:39:09 -0500 (CDT)
IPC SPECS	<>	Wed, 24 May 1995 15:03:35 -0500 (CDT)
Re: IPC STANDARDS	Jon Holmen	Wed, 2 Aug 1995 14:52:33 -0500 (CDT)
IPC STANDARDS	<>	Wed, 02 Aug 95 13:14:34 CST
Re: IPC STANDARDS	Jon Holmen	Mon, 10 Jul 1995 09:09:56 -0500 (CDT)
Re: IPC STANDARDS	David Bergman	Mon, 10 Jul 1995 09:00:55 -0500 (CDT)
IPC STANDARDS	<>	Mon, 10 Jul 95 08:01:26 cst
Re: IPC versus Mil-specs	<>	Wed, 2 Aug 1995 08:33:29 -0400
Re: IPC versus Mil-specs	David Bergman	Tue, 1 Aug 1995 18:36:45 -0500 (CDT)
IPC versus Mil-specs	<>	Tue, 1 Aug 95 09:27:56 MDT
Re: IPC-A-600	Jon Holmen	Mon, 19 Jun 1995 16:33:44 -0500 (CDT)
IPC-A-600	<>	Mon, 19 Jun 95 16:36:30 EDT
Re: IPC-A-610 vs ANSI/J-STD-001	BWOOLDRI	Thu, 26 Oct 95 13:26:21 CST
Re: IPC-A-610 vs ANSI/J-STD-001	Mike Buetow	Thu, 26 Oct 1995 13:31:29 -0500 (CDT)
IPC-A-610 vs ANSI/J-STD-001	Daniel F. Shea 2-2410	Tue, 24 Oct 95 16:52:33 edt
Re: ipc-d-319 (fwd)	Jerry Cupples	Fri, 13 Oct 1995 13:24:51 -0500
ipc-d-319 (fwd)	Christopher Rhodes	Fri, 13 Oct 1995 10:15:27 -0500 (CDT)
IPC-EM-782	<>	Wed, 13 Sep 1995 13:06:39 -0700
Re: IPC-SM-782	Mike Buetow	Fri, 11 Aug 1995 10:33:07 -0500 (CDT)
IPC-SM-782	<>	Fri, 11 Aug 95 08:35:19 BST
Re: IPC-SM-782 1210 FOOTPRINTS	Vivian Vosburg	Fri, 22 Dec 1995 11:50:23 -0600 (CST)
Re: IPC-SM-782 1210 FOOTPRINTS	<>	Fri, 27 Oct 1995 15:17:54 -0400
Re: IPC-SM-782 1210 FOOTPRINTS	Mike Buetow	Fri, 27 Oct 1995 13:10:05 -0500 (CDT)
IPC-SM-782 1210 FOOTPRINTS	KEVIN BERRY	Fri, 27 Oct 1995 11:42:09 -0500
IR microscopy need	<>	03 Aug 95 13:05:00 -0700
JIPC/ITRI Technology Exchange Meeting	Toshiki Sasabe 29-Sep-1995 1003	Thu, 28 Sep 95 21:09:28 EDT
job offered	Omar	Mon, 30 Oct 95 10:47:02 -0800
JOB OPENING - ENGINEERING MGMT.	<>	Thu, 26 Oct 1995 19:19:07 -0400
Job opening: Business Development Manager / Alpha Metals	Karen Tellefsen	Tue, 19 Dec 1995 13:16:01 -0500
JOB OPENINGS	<>	Fri, 04 Aug 95 15:32:50 EST
Job Opportunities Available	<>	Thu, 5 Oct 1995 14:12:20 -0400
Job Opportunity	<>	Tue, 3 Oct 1995 16:49:38 -0400
JOB OPPORTUNITY AVAILABLE	<>	Thu, 5 Oct 1995 14:47:17 -0400
JOB OPPORTUNITY AVAILABLE	<>	Thu, 5 Oct 1995 14:29:28 -0400
Job Opportunity for Engineers	<>	Thu, 5 Oct 1995 12:56:00 -0400
JOB OPPORUTNITY AVAILABLE	<>	Thu, 5 Oct 1995 14:31:58 -0400
Job Posting	<>	24 Aug 95 15:49:55 -0500
Job Posting	Alan Cable	Thu, 22 Jun 95 11:06:00 PDT
Job Posting	Alan Cable	Thu, 22 Jun 95 11:41:00 PDT
Job Posting (Not a vote)	Bob Trinnes	Wed, 09 Aug 95 18:18:59 EST
JOB POSTING DIRECTOR OF SALES & MARKETING	Leo Reynolds	Wed, 9 Aug 1995 06:31:22 -0700
Re: Job Postings	Brian Walsh	Thu, 10 Aug 95 08:44:51 EST
Re: Job Postings	<>	Thu, 10 Aug 1995 07:41:45 -0400
Job Postings	<>	Wed, 9 Aug 1995 19:48:51 -0400
Re: Job Postings	Chris Scholbe	Wed, 9 Aug 1995 15:10:55 -0400 (EDT)
Job Postings	Houle, Terry R @EAG	Wed, 09 Aug 95 12:53:00 CST
Job postings	Jerry Galang	Tue, 8 Aug 95 07:47 PDT
Re: Job Postings	Mike Buetow	Mon, 7 Aug 1995 15:07:12 -0500 (CDT)
Job Postings	<>	Mon, 7 Aug 95 15:55:24 EDT
Job Postings	<>	Mon, 07 Aug 95 10:10:30 EST
Job Postings - PCB Assembly Engineers	geiland	Tue, 08 Aug 95 15:15:45 CST
job postings discussion	OMAR	Fri, 11 Aug 95 13:29:21 -0700
June Program, Los Angles area, electronic packaging	Bill Gaines B160 x2199	Thu, 25 May 95 11:03:18 PDT
Re: Know any good process engineers in search of challenge?	<>	Wed, 18 Oct 1995 10:38:13 -0400
Know any good process engineers in search of challenge?	<>	Wed, 18 Oct 1995 02:29:28 -0400
Re: LAMINATE DIMENSIONAL TESTING	<>	Tue, 05 Dec 95 08:32:58 EST
LAMINATE DIMENSIONAL TESTING	<>	Mon, 4 Dec 95 14:56:29 PST
LAMINATE HISTORY	Bernard Kessler & Associates LTD	Wed, 6 Sep 95 17:00 EST
Re: laminate with CTI of 400+	<>	Thu, 31 Aug 1995 22:28:40 -0400
Re[2]: laminate with CTI of 400+	<>	Tue, 15 Aug 95 18:46:38 EST
Re[2]: laminate with CTI of 400+	jyoung	Tue, 15 Aug 95 15:23:53 PST
Re: laminate with CTI of 400+	<>	Mon, 14 Aug 95 12:59:04
laminate with CTI of 400+	<>	Thu, 10 Aug 1995 04:45:09 EDT
Re: laminate with CTI of 400+.....(resent)	<>	Mon, 14 Aug 95 14:15:21
Re[2]: Laminates and Prepregs	JOHN GULLEY	Wed, 22 Nov 1995 16:53:48 -0800
Re: Laminates and Prepregs	<>	Tue, 21 Nov 1995 21:21:26 -0500
Laminates and Prepregs	JOHN GULLEY	Tue, 21 Nov 1995 08:22:13 -0800
Laminates and Prepregs	JOHN GULLEY	Mon, 20 Nov 1995 14:26:02 -0800
Laminates and Prepregs	JOHN GULLEY	Mon, 20 Nov 1995 10:11:00 -0800
Re: Lamination pinning	<>	Wed, 26 Jul 1995 01:01:33 -0400
Lamination pinning	R_R_HOLMES	23 Jul 95 10:29:01 -0400
Re: Laser drilling of vias	R_R_HOLMES	14 Jun 95 07:56:14 -0400
Re: Laser drilling of vias	R_R_HOLMES	14 Jun 95 07:50:18 -0400
Laser drilling of vias	<>	Tue, 13 Jun 95 08:31:29 PDT
Re:Laser Drilling of vias, posted June 13th	Alan Cable	Thu, 29 Jun 95 21:42:00 PDT
Legend Ink	sbryan	Sun, 19 Nov 95 11:14:29 PST
Legend Screen	<>	Tue, 28 Nov 95 18:23:22 CST
LONG ISLAND (NY)... DESIGNERS COUNCIL FORMING	<>	Tue, 11 Jul 95 13:01:49 EDT
Looking for Information on bare board re-working	<>	Thu, 14 Sep 1995 15:43:51 -0400
Re: Looking for Work	ETHIER_SA	Wed, 06 Dec 95 16:37:24 EST
Looking for Work	Crawford, John A.	Mon, 04 Dec 95 14:18:00 EST
Lot Coding PCBs	<>	Wed, 19 Jul 1995 11:09:51 -0400
Re: lotcoding PCB's	<>	Tue, 18 Jul 1995 12:23:14 -0400
lotcoding PCB's	Josh Moody EXT 4508	Mon, 17 Jul 1995 16:51:06 -0700 (PDT)
Re: LPI Soldermask with Tented Via's	Jeff Deeney	Tue, 13 Jun 95 9:44:24 MDT
RE: LPI Soldermask with Tented Via's	Wally Doeling (wallyd)	Mon, 12 Jun 95 10:23:00 PDT
Re: LPI Soldermask with Tented Via's	Bill Gaines B160 x2199	Mon, 12 Jun 95 07:18:03 PDT
LPI Soldermask with Tented Via's	<>	Sat, 10 Jun 95 12:46:24 EST
LPI Soldermask with Tented Via's	Jim McNeal	Fri, 09 Jun 1995 18:28:48 -0500
Re: MACHINE SHOP CLEANING	Mary Davis	4 May 1995 11:10:35 -0600
MACHINE SHOP CLEANING	Jim Marsico	Thu, 04 May 95 13:05:01 -0400
Manufacturer's locator matrix	<>	Wed, 20 Sep 1995 7:57:53 +0100
Manufacturer's Locator Matrix	<>	Fri, 15 Sep 95 10:47:28 EDT
Re: Manufacturer's Locator Matrix Inquiry.	IRVING LEE, COMPONENT ENGINEERING DEPT/MOD,@TAO	Tue, 19 Sep 95 17:21:04 PDT
Re: Manufacturer's Locator Matrix Inquiry.	Jim Marsico	Tue, 19 Sep 95 18:29:01 -0400
Re: Manufacturer's Locator Matrix Inquiry.	Mike Buetow	Tue, 19 Sep 1995 08:58:07 -0500 (CDT)
Manufacturer's Locator Matrix Inquiry.	<>	Mon, 18 Sep 95 17:34:11 PST
Re: Manufactures Locator Matrix	Mike Buetow	Thu, 21 Sep 1995 14:09:28 -0500 (CDT)
Manufactures Locator Matrix	Houle, Terry R @EAG	Wed, 20 Sep 95 09:18:00 CST
MARKET SHORTAGES OF LAMINATES AND PREPREGS	<>	Thu, 21 Sep 1995 00:03:35 -0400
Re: Masking during Reflow	<>	Thu, 31 Aug 1995 22:11:11 -0400
Masking during Reflow	Peter Swanson	Tue, 29 Aug 1995 12:12:38 GMT
Re: Mass Lead Trimmers	Jerry Cupples	Tue, 12 Sep 1995 11:16:42 -0500
Mass Lead Trimmers	<>	Tue, 12 Sep 1995 09:29:02 -0400
Re: Max Operating Temperature	<>	Mon, 23 Oct 1995 16:52:24 -0400
Max Operating Temperature	Frederick A Martin	18 Oct 95 15:47:45 EDT
Re[2]: MCM-L Documentation	<>	Thu, 30 Nov 95 12:19:35 EST
Re: MCM-L Documentation	Thomas Dammrich	Thu, 30 Nov 1995 09:35:22 -0600 (CST)
Re: MCM-L Documentation	Mike Buetow	Wed, 29 Nov 1995 16:02:46 -0600 (CST)
MCM-L Documentation	APeder01	29 Nov 1995 14:08:14 EST
Re: Mecseal finish and assemblyproblem	Steve Sarasin	Wed, 29 Nov 95 07:27:01 EST
Mecseal finish and assemblyproblem	<>	Tue, 28 Nov 95 10:17:03 EST
Mecseal finish and assemblyproblem	<>	Thu, 23 Nov 95 12:12:12 EST
Message for William Waerhouse, Larry Rehder,Sarah Leach,Brian O'brien & Steve Gregory	David Christopher Whalley	Tue, 21 Nov 95 09:40:33 gmt
Mexican Board Shops	Houle, Terry R @EAG	Tue, 09 May 95 15:57:00 CST
Re: Mil Standard Replacements	Crawford, John A.	Mon, 11 Dec 95 09:00:00 EST
Re: Mil Standard Replacements	David Bergman	Sat, 9 Dec 1995 14:43:46 -0600 (CST)
Mil Standard Replacements	<>	Fri, 8 Dec 1995 15:29:06 -0500
MIL-I-46058C Coat. Adh. Cou	Mary Davis	15 Jun 1995 19:01:35 -0600
Mil-P-13949	Moffitt, James H.	Wed, 24 May 95 16:28:00 EST
Re: Mil-P-13949F	jyoung	Wed, 24 May 95 15:23:01 PST
Re: Mil-P-13949F	Mike Buetow	Wed, 24 May 1995 16:35:47 -0500 (CDT)
Mil-P-13949F	<>	Wed, 24 May 1995 15:00:47 -0500 (CDT)
MIL-S-13949H TYPE CF Material	<>	Fri, 12 May 1995 14:47:16 -0400
Military rigid flex	Houle, Terry R @EAG	Thu, 26 Oct 95 13:50:00 CST
Re: Minimum Solder Thickness @ Assembly	<>	Wed, 22 Nov 1995 16:11:58 -0500
Re: Minimum Solder Thickness @ Assembly	Walker, Don	Wed, 22 Nov 95 12:13:31
Re: Minimum Solder Thickness @ Assembly	dmitchel	Wed, 22 Nov 95 11:03:50 PST
Re: Minimum Solder Thickness @ Assembly	David Christopher Whalley	Wed, 22 Nov 95 18:29:39 gmt
Re: Minimum Solder Thickness @ Assembly	David Bergman	Wed, 22 Nov 1995 16:39:06 -0600 (CST)
Minimum Solder Thickness @ Assembly	Glynn Shaw	Tue, 21 Nov 1995 09:55:00 -0800
Minumum Nickel Plating Thickness	Nancy Nelson	Thu, 07 Dec 95 12:13:26 CST
Missing Components	Yerkes, Robert	Tue, 12 Dec 95 13:35:00 CST
Mitsubishi Bond Film	<>	Thu, 14 Dec 95 18:46:04 EST
More information	Bob Zwicker	Thu, 14 Dec 95 08:16:00 G
MULTI-LAYER LAY-UP MATERIAL VERIFICATION	<>	Wed, 21 Jun 95 09:05:42 PDT
Multibus II backpanels	<>	Sat, 28 Oct 95 09:18:54 PST
Multibus II Backpanels	Houle, Terry R @EAG	Wed, 25 Oct 95 07:31:00 CST
Re[2]: Murata Erie Changes	<>	Mon, 30 Oct 95 15:46:30 PST
Re[2]: Murata Erie Changes	<>	Mon, 30 Oct 95 09:21:21 PST
RE: Murata Erie Changes	Crawford, John A.	Fri, 27 Oct 95 13:44:00 EST
Murata Erie Changes	Jeffery L. Hempton	Wed, 25 Oct 1995 14:52:44 -0500
Net List Testing	<>	Sat, 21 Oct 95 19:52:15 EST
New 1507 type glass fabric	<>	Sat, 5 Aug 1995 15:35:06 +0800
Re: New BGA Via Soldering	Greg Bartlett	11 Dec 1995 12:59:04 -0500
New BGA Via Soldering	Robert Willis	10 Dec 95 12:30:11 EST
New British Surface Solderability Test Method	<>	Mon, 14 Aug 95 11:13:11 dst
New British Surface Solderability Test Method	<>	Mon, 14 Aug 95 11:13:11 dst
Re: New Revisions of RF-276	LISA GREENLEAF	1 Dec 1995 12:52:26 -0400
Re: New Revisions of RF-276 and A-600	Jon Holmen	Fri, 1 Dec 1995 10:30:25 -0600 (CST)
Re: New Revisions of RF-276 and A-600	Mike Buetow	Fri, 1 Dec 1995 10:08:00 -0600 (CST)
New Revisions of RF-276 and A-600	APeder01	01 Dec 1995 08:12:08 EST
New SMART Group Cleraning Survey	Robert Willis	09 Dec 95 05:36:08 EST
New web site and newsgroup	<>	Wed, 20 Dec 1995 19:13:42 -0500
FW: Ni contamination	Crawford, John A.	Wed, 13 Sep 95 13:06:00 EST
Ni contamination	<>	Wed, 06 Sep 95 10:41:18 EST
Re: Ni contamination	Michael Besket	Tue, 05 Sep 95 07:27:12 PST
Ni contamination	<>	Sat, 2 Sep 1995 22:04:30 -0400
RE: Ni contamination (fwd)	Leila Hady	Wed, 6 Sep 1995 14:39:25 -0500 (CDT)
Re[2]: Nickel Diffusion Barrier	<>	Fri, 29 Sep 95 13:21:23 EST
Re: Nickel Diffusion Barrier	Lee Bab Kieng	Fri, 29 Sep 1995 00:12:01 +0800 (SST)
Re: Nickel Diffusion Barrier	Jerry Cupples	Wed, 27 Sep 1995 14:57:00 -0500
No Clean	GEILAND	Mon, 02 Oct 95 10:02:00 CST
No clean process impacts (fwd)	<>	Wed, 26 Apr 1995 16:28:17 -0500 (CDT)
NO SUBJECT	<>	Wed, 18 Oct 95 12:35:30 EDT
NO SUBJECT	Jim Marsico	Fri, 29 Sep 95 16:38:01 -0400
NO SUBJECT	<>	Sun, 27 Aug 95 00:24:26 EDT
Re[2]: No-clean Process Controls	geiland	Thu, 06 Jul 95 12:50:10 CST
Re: No-clean Process Controls	<>	Thu, 6 Jul 1995 09:35:27 -0400
re: No-clean Process Controls	Simon Li	Mon, 3 Jul 95 18:11:39 MDT
No-clean Process Controls	geiland	Sun, 02 Jul 95 11:47:15 CST
Re: No-clean process impact	<>	Mon, 08 May 95 17:58:19 EDT
Re: No-clean process impact	<>	Mon, 01 May 95 08:20:01 MST
RE: Non solderable toes on QFP's	Crawford, John A.	Wed, 20 Dec 95 09:37:00 EST
Non solderable toes on QFP's	John Burke	Tue, 19 Dec 95 08:25:01 GMT
RE: non-functional	Brian R Oatman	Mon, 16 Oct 1995 19:34:11 -0700
Re: Non-functional pad removal	<>	Mon, 23 Oct 1995 16:51:56 -0400
Non-functional pad removal	<>	Fri, 20 Oct 95 01:37:52 EST
Re[3]: Non-Functional PadMy View-- non-functional pads	<>	Thu, 19 Oct 95 12:08:26 EST
Re[2]: Non-Functional PadMy View-- non-functional pads	<>	Wed, 18 Oct 95 14:31:55 MST
Re: Non-Functional PadMy View-- non-functional pads	Robert Blomstrom	Wed, 18 Oct 95 11:40:03 EDT
Re: Non-Functional PadMy View-- non-functional pads	Jack Holm	Wed, 18 Oct 95 8:04:09 CDT
Re: Non-Functional Pads	Bill Gaines B160 x2199	Tue, 17 Oct 95 16:42:33 PDT
Re: non-functional pads	TOM HYBISKE	Tue, 17 Oct 1995 13:38:35
Non-functional Pads.	MR DOUGLAS C JEFFERY	Wed, 31 May 1995 21:37:38 EDT
Re: Non-Functional Pads?	<>	Thu, 19 Oct 1995 11:34:05 -0400
Re[2]: Non-Functional Pads?	PULVINO, DENNY	Tue, 17 Oct 95 13:32:16 PST
Re: Non-Functional Pads?	COCHRANE, ALAN	Tue, 17 Oct 95 10:58:28 PST
Re: Non-Functional Pads?	Mike McNulty	Tue, 17 Oct 1995 13:42:43 -0400
Non-Functional Pads?	Thorson, Kevin J @EAG	Tue, 17 Oct 95 10:01:00 CST
Non-Plated hole to Etched feature locational tolerance	<>	Thu, 17 Aug 95 17:43:13 EST
Non-Plated hole to Etched feature locational tolerance	Thad McMillan	Thu, 17 Aug 95 13:40:49 CST
None	Mary Davis	26 Sep 1995 12:28:53 -0600
Re: Nonfunctional Lands	<>	Wed, 31 May 1995 16:41:18 -0400
Re: Nonfunctional Lands	Fred Paul	Wed, 31 May 1995 09:00:27 DST
Re: Nonfunctional Lands	Bill Gaines B160 x2199	Wed, 31 May 95 07:49:54 PDT
Nonfunctional Lands	<>	Tue, 30 May 95 17:55:20 EST
Nonfunctional Lands	TOM HYBISKE	Tue, 30 May 1995 13:47:24
OEM DFM Conference	Yuen, Mike	Wed, 13 Sep 95 16:15:00 CDT
OEM DFM COnference	Yuen, Mike	Wed, 13 Sep 95 10:40:00 CDT
Re: Offshore procurement of PWB	Cavin Clif	Mon, 23 Oct 95 09:34:00 MST
Re: Offshore procurement of PWB	<>	Fri, 20 Oct 95 12:16:26 PST
Offshore procurement of PWB	Larry, Ext 4884, MD 9A	Thu, 19 Oct 1995 14:55:09 -0500 (CDT)
open dialog	Al Slagle	Wed, 25 Oct 95 10:11:52 MDT
OPTALLOY SOURCE	Crawford, John A.	Fri, 05 May 95 08:47:00 EST
Re: Optical Comparators	Evaltine	Wed, 13 Dec 1995 17:54:56 -0500 (EST)
Optical Comparators	<>	Wed, 13 Dec 1995 13:35:13 -0600
Re: OSP (entek) and Press Fit Connectors	Michael Barmuta	Wed, 9 Aug 1995 14:18:35 DST
Re: OSP (entek) and Press Fit Connectors	<>	Wed, 09 Aug 95 13:37:54
OSP (entek) and Press Fit Connectors	<>	Wed, 09 Aug 95 13:54:14 EDT
OSP on teflon boards	Jim Marsico	Tue, 12 Dec 95 19:03:01 -0500
OSP VS Immersion gold VS HASL	Robert Willis	16 Sep 95 02:44:08 EDT
Re: OSP VS Immersion gold VS HASL	Jerry Cupples	Thu, 14 Sep 1995 16:06:53 -0500
OSP VS Immersion gold VS HASL	<>	Thu, 14 Sep 95 15:19: 7 edt
Fwd: Re: Other email forums?	Chris Stack	Tue, 28 Nov 95 15:42:17
Outer circuit & PISM registration.	<>	Thu, 31 Aug 1995 18:00:49 GMT
Package Type Standards	Don Wellnitz	Tue, 19 Sep 95 18:09:18 PDT
PAL Programing Requirement	chris byrne	Wed, 3 May 1995 23:08:16 -0500
Re: Palladium for PCB	<>	Wed, 16 Aug 1995 11:02:16 -0400
Palladium for PCB	Stuber, Chuck	Tue, 15 Aug 95 12:08:00 EDT
RE: Palladium Lead Plating Problems	Crawford, John A.	Wed, 22 Nov 95 12:42:00 EST
Palladium Lead Plating Problems	Martin Kennett	Tue, 21 Nov 1995 08:51:32 -0600
Re[2]: Palladium plated IC leads.	<>	Tue, 31 Oct 95 12:58:48 EST
Re: Palladium plated IC leads.	JSMETANA	Tue, 31 Oct 95 10:07:33 CST
Re: Palladium plated IC leads.	JSMETANA	Mon, 30 Oct 95 13:06:09 CST
Re: Palladium plated IC leads.	JSMETANA	Mon, 30 Oct 95 08:39:55 CST
Palladium plated IC leads.	<>	Thu, 26 Oct 95 14:29:56 CST
Panel Polishing	<>	Mon, 21 Aug 95 10:24:54 PDT
Parallel Communications Through Status Lines.	<>	Mon, 16 Oct 1995 16:33:31 -0400
Re: Paste in hole	<>	Thu, 17 Aug 95 08:10:51 PST
Re: Paste in hole	<>	Wed, 16 Aug 95 14:09:27 dst
Paste in hole	Tom Chung	Wed, 16 Aug 1995 13:24:07 -0600
Re: Pb migration on thick film ceramic	<>	Mon, 17 Jul 1995 07:48:40 -0400
Pb migration on thick film ceramic	Mitch Austin	Sat, 15 Jul 95 07:02:30 CDT
Re: Pb migration on thick film ceramic	<>	Fri, 14 Jul 1995 13:10:48 -0400
Pb migration on thick film ceramic	Rory Doyle	Fri, 14 Jul 1995 14:49:06 +0000
Re: pcb flatness	Jon Holmen	Wed, 12 Jul 1995 13:03:42 -0500 (CDT)
pcb flatness	Peter Swanson	Thu, 06 Jul 1995 18:09:51 GMT
Re: PCB Laminate Properties	David Christopher Whalley	Fri, 5 May 95 09:10:38 bst
PCB Laminate Properties	TOM HYBISKE	Thu, 04 May 1995 14:00:56
RE: PCB Material (for Stress and Deformation Analysis)	Crawford, John A.	Mon, 04 Dec 95 09:23:00 EST
RE: PCB Material (for Stress and Deformation Analysis)	Crawford, John A.	Fri, 01 Dec 95 13:52:00 EST
PCB Material (for Stress and Deformation Analysis)	Jorge Jimenez	Wed, 29 Nov 95 14:51:22 -0600
PCB noise reduction vs. # of layers	Tom Crofford	Tue, 10 Oct 1995 20:54:22 -0500
Re: PCB Pre Bake	<>	Mon, 11 Sep 95 10:28:40 EST
PCB Pre Bake	Robert Willis	08 Sep 95 15:31:21 EDT
Re: PCB Pre Bake	Robert Willis	08 Sep 95 15:41:59 EDT
Re: PCB Pre Bake	<>	Fri, 08 Sep 95 07:47:56
PCB Pre Bake	ian graham	Fri, 8 Sep 1995 09:49:58 +0930 (CST)
Re: PCB Voltage Testing	R_R_HOLMES	20 Dec 95 08:53:46 -0500
PCB Voltage Testing	George Ross	13 Dec 1995 14:13:50 -0500
Re: PCB vs. Paste Stencil	<>	Tue, 24 Oct 1995 15:14:13 -0400
Re: PCB vs. Paste Stencil	Al Slagle	Tue, 24 Oct 95 10:27:45 MDT
Re: PCB vs. Paste Stencil	LARRY A. STERNIG	Tue, 24 Oct 1995 09:27:01 -0500
Re:PCB vs. Paste Stencil	<>	Thu, 19 Oct 95 10:04:03 PST
Re: PCB vs. Paste Stencil Comp	John Burke	Thu, 19 Oct 95 06:49:24 GMT
Re: PCB vs. Paste Stencil Comp	Jerry Cupples	Wed, 18 Oct 1995 20:58:14 -0500
Re: PCB vs. Paste Stencil Comp	Doug Ondricek	Wed, 18 Oct 95 20:36:42 CDT
PCB vs. Paste Stencil Comp	<>	Wed, 18 Oct 95 18:29:11 EDT
Re: PCB's with SIR patterns	<>	Fri, 1 Sep 1995 15:01:40 -0400
Re: PCB's with SIR patterns	David Bergman	Fri, 1 Sep 1995 13:11:13 -0500 (CDT)
Re: PCB's with SIR patterns	<>	Thu, 31 Aug 1995 20:44:25 -0400
PCB's with SIR patterns	<>	Wed, 30 Aug 95 10:04:58
PCB/Hot Air Solder leveling	<>	Mon, 07 Aug 95 10:00:36 EST
Re: PCB/Hot Air Solder leveling	<>	Sat, 5 Aug 1995 08:07:46 -0400
Re: PCB/Hot Air Solder leveling	<>	Fri, 4 Aug 1995 19:27:06 -0400
PCB/Hot Air Solder leveling	Judy Warner	Fri, 4 Aug 1995 11:45:18 -0700
Re: PCBA Ionic Contamination Levels	<>	Wed, 04 Oct 95 10:38:20 dst
PCBA Ionic Contamination Levels	Evaltine	Tue, 3 Oct 1995 17:01:17 -0400 (EDT)
RE:PCBoard House	IRVING LEE, PWB COMPONENT ENGR/MOD @TAO, EXT:2164	Sun, 14 May 95 17:30:13 PDT
PCBoard House	Richard Ackerson	Fri, 12 May 95 13:30:54 EDT
RE: PCMCIA	Crawford, John A.	Tue, 12 Dec 95 13:37:00 EST
Re: PCMCIA	Lisa Williams	Tue, 12 Dec 1995 12:17:52 -0600 (CST)
PCMCIA	Mickey Weiner (2937)	Mon, 11 Dec 1995 18:06:03 +0200 (IST)
PCMCIA	Ian Graham	Mon, 23 Oct 1995 18:32:24 +0930 (CST)
re:PCMCIA drilling	MR DAVID E MANDER	Tue, 05 Sep 1995 17:28:45 EDT
Re: Periodic Problems With Ox...	<>	Mon, 27 Nov 1995 02:40:26 -0500
Re: Periodic Problems With Oxiding	<>	Mon, 27 Nov 95 18:29:05 EST
Periodic Problems With Oxiding	<>	Sat, 25 Nov 1995 15:46:02 -0500
Phosphorous content of nickel	<>	Fri, 14 Jul 95 11:56:28 EDT
PHOSPHOROUS CONTENT OF NICKEL	<>	29 Jun 95 15:57:00 -0500
Re: photo resist	<>	Mon, 30 Oct 1995 17:00:14 -0500
Re: photo resist	Andrew P Magee	Mon, 30 Oct 95 17:33 EST
Re: photo resist	Jerry Cupples	Mon, 30 Oct 1995 16:55:45 -0600
photo resist	Al Slagle	Mon, 30 Oct 95 13:17:53 MST
Re: photo-via technologies	<>	Thu, 5 Oct 1995 08:54:15 -0400
Re: photo-via technologies	R_R_HOLMES	5 Oct 95 08:03:01 -0400
photo-via technologies	ScicardsR user id	Wed, 4 Oct 95 12:56:27 EDT
Re: Pin Holes/Blow Holes	David Bergman	Tue, 24 Oct 1995 09:52:45 -0500 (CDT)
Pin Holes/Blow Holes	MR NORMAN S EINARSON	Mon, 23 Oct 1995 14:53:54 EDT
Re: Pinholes	BWOOLDRI	Fri, 29 Sep 95 07:58:35 CST
Re: Pinholes	Jon Holmen	Thu, 28 Sep 1995 16:49:19 -0500 (CDT)
Pinholes	Richard Boerdner	Thu, 28 Sep 95 16:47:30 -0700
RE: PINK POLY BAGS	Jim Marsico	Fri, 09 Jun 95 11:33:01 -0400
RE: Pink Poly Bags/Shipping PCB Assy's	Crawford, John A.	Fri, 09 Jun 95 12:49:00 EST
Re: Pink Poly Bags/Shipping PCB Assy's	<>	Fri, 9 Jun 1995 08:59:20 -0400
RE: Pink Poly Bags/Shipping PCB Assy's	Wrezel Jim	8 Jun 1995 21:11:52 -0500
Pink Poly Bags/Shipping PCB Assy's	Leo Reynolds	Thu, 8 Jun 1995 14:05:39 -0700
Re: Pitting Condition on PTFE PWB's	<>	Fri, 29 Sep 95 13:21:02 EST
Pitting Condition on PTFE PWB's	<>	Wed, 27 Sep 95 15:32:17 PDT
Plasma Cleaning	<>	Fri, 20 Oct 95 07:00:05 CDT
Plasma Cleaning	<>	Thu, 19 Oct 95 15:50:35 CDT
Re: Plated Through Hole Rim Voids	<>	Thu, 21 Dec 95 01:16:07 EST
Re[3]: Plated Through Hole Rim Voids	<>	Wed, 20 Dec 95 12:45:42 EST
Re[2]: Plated Through Hole Rim Voids	Thad McMillan	Wed, 20 Dec 95 09:52:15 CST
Re: Plated Through Hole Rim Voids	denise rooke	Tue, 19 Dec 1995 23:05:00 -0500 (EST)
Re: Plated Through Hole Rim Voids	<>	Tue, 19 Dec 95 13:07:05 EST
Re: Plated Through Hole Rim Voids	<>	Tue, 19 Dec 1995 08:54:05 -0600 (CST)
Re: Plated Through Hole Rim Voids	dmitchel	Tue, 19 Dec 95 06:51:58 PST
Plated Through Hole Rim Voids	<>	Mon, 18 Dec 1995 13:38:05 -0500
Fwd: plated thru hole rim voids	MR MIKE V CARANO	Mon, 18 Dec 1995 23:37:19 EST
Re: Plating specification	<>	Fri, 20 Oct 95 16:33:22 PST
Plating specification	David Hamilton	Thu, 19 Oct 1995 11:54:42 -0500
PLCC Spacing	<>	Wed, 26 Jul 1995 14:00:07 -0400
plugging vias	John Nelson	Mon, 12 Jun 1995 07:51:08 -0400 (EDT)
Polymer resistors on FR4	John Burke	17 May 95 09:58:07 EDT
Popcorn; Delamination: Floating	<>	Tue, 29 Aug 95 07:02:19 PST
Re: Popcorn; Delamination: Floating	Mike Buetow	Wed, 16 Aug 1995 10:09:59 -0500 (CDT)
Popcorn; Delamination: Floating	<>	Tue, 15 Aug 1995 10:40:26 -0400
pores in Au-platings	Carlsson Per	Tue, 24 Oct 95 12:26:00 MET
Post drill cleaning of boards	Alan Cable	Mon, 31 Jul 95 20:57:00 PDT
Re: PPM Solder defect rates	Robert Willis	07 Dec 95 12:36:54 EST
Re: PRE-BAKE FOR FLEXIBLE CIRCUITS	Mickey Weiner (2937)	Wed, 13 Sep 1995 18:55:15 +0300 (IDT)
Re: PRE-BAKE FOR FLEXIBLE CIRCUITS	Andrew P Magee	Tue, 12 Sep 95 13:27 EST
Re: PRE-BAKE FOR FLEXIBLE CIRCUITS	Amerigo	Mon, 11 Sep 95 15:21:19 -0700
Re: PRE-BAKE FOR FLEXIBLE CIRCUITS	Jerry Cupples	Mon, 11 Sep 1995 14:25:29 -0500
PRE-BAKE FOR FLEXIBLE CIRCUITS	BOB HOENE	Mon, 11 Sep 1995 11:01:25 -0600
Re: Press fit padstacks	<>	Thu, 27 Jul 95 16:36:40
Press fit padstacks	Doug Ondricek	Thu, 27 Jul 95 15:44:57 -0500
Press fit technology on ENTEK boards...	<>	Thu, 08 Jun 95 10:34:46 EST
Re: Press fit technology on ENTEK boards...	<>	Wed, 07 Jun 95 17:42:06 PST
Press fit technology on ENTEK boards...	Dean Barham, x3805/p-0217	Wed, 07 Jun 1995 17:50:10 -0500 (EST)
Problems with bare copper FPCs	Luke Mendoza	Mon, 21 Aug 1995 06:14:34 +0800
Re: Production fab shop selection	Mike Buetow	Fri, 22 Dec 1995 10:12:44 -0600 (CST)
Production fab shop selection	Kerry Murphy	Thu, 21 Dec 1995 14:07:19 -0800 (PST)
Re: PTF - screened EMI shielding	sbryan	Fri, 08 Dec 95 13:11:29 PST
PTF - screened EMI shielding	<>	Fri, 08 Dec 1995 09:34:25 EST
Re: PTFE drilling	<>	Tue, 10 Oct 1995 08:50:56 -0400
Re: PTFE drilling	<>	Fri, 06 Oct 95 10:30:21 EST
PTFE drilling	David Bergman	Thu, 5 Oct 1995 13:28:31 -0500 (CDT)
Re: pull-pads	Silbert, Steve	Tue, 24 Oct 95 17:31:00 EDT
Re: pull-pads	<>	Sat, 21 Oct 95 14:00:18 EST
Re: pull-pads	<>	Fri, 20 Oct 95 16:33:40 PST
Re: pull-pads	<>	Fri, 20 Oct 1995 17:22:40 -0400
Re: pull-pads	<>	Thu, 19 Oct 95 10:23:09 EST
pull-pads	Brian R Oatman	Tue, 17 Oct 1995 18:02:13 -0700
pull-pads	Al Slagle	Wed, 18 Oct 95 10:50:36 MDT
Re: Pure Difunctional FR4 Suppliers,	Fred Paul	Tue, 16 May 1995 07:21:11 DST
Pure Difunctional FR4 Suppliers,	<>	Tue, 16 May 95 10:22:06 EST
Pure Difunctional FR4 Suppliers,	George Wheadon	15 May 95 18:10:52 EDT
Pure Difunctional FR4 Suppliers,	Fred Paul	Mon, 15 May 1995 10:11:35 DST
Re: PWB artwork	<>	Wed, 22 Nov 1995 16:29:04 -0500
Re: PWB artwork	<>	Sat, 18 Nov 1995 09:59:03 -0500
Re: PWB artwork	Clark F Webster	17 Nov 1995 16:32:52 -0600
Re: PWB artwork	dmitchel	Fri, 17 Nov 95 09:40:18 PST
PWB Design Book	Jerry Cupples	Tue, 24 Oct 1995 00:06:13 -0500
PWB Drill File Standards	<>	Mon, 17 Jul 1995 11:53:48 -0400
PWB Drilling File standards	<>	Mon, 17 Jul 1995 11:56:06 -0400
PWB drilling standards	<>	Wed, 19 Jul 1995 11:11:25 -0400
PWB Fab shop Consultant wanted	<>	Thu, 28 Sep 1995 21:31:53 -0400
PWB mfgr on Ferrite mtrls	David Bergman	Wed, 21 Jun 1995 15:19:09 -0500 (CDT)
Re: PWB SHELFLIFE	David Bergman	Wed, 21 Jun 1995 12:59:21 -0500 (CDT)
Re: PWB SHELFLIFE	<>	Mon, 5 Jun 1995 11:04:05 -0400
PWB SHELFLIFE	Houle, Terry R @EAG	Fri, 02 Jun 95 14:08:00 CST
Re: PWB Solder defect rates	denise rooke	Sat, 16 Dec 1995 23:40:56 -0500 (EST)
Re: PWB Solder defect rates	Mike Fugl	Thu, 07 Dec 95 08:26:34 GMT
PWB Solder defect rates	denise rooke	Wed, 6 Dec 1995 22:54:21 -0500 (EST)
QCM Technology	Lee Bab Kieng	Wed, 20 Sep 1995 06:13:35 +0800 (SST)
Quality Control System Software Company Recommendation	<>	Mon, 19 Jun 95 06:33:39 PST
Quality Management System	Andrew P Magee	Mon, 9 Oct 95 19:14 EST
Re: Quality Management System	Vivian Vosburg	Mon, 9 Oct 1995 17:17:07 -0500 (CDT)
Quality Management System	Nanci Baggett	Mon, 09 Oct 1995 14:19 CST
Re: Question	Vivian Vosburg	Wed, 13 Sep 1995 13:45:05 -0500 (CDT)
Question	Ian	Wed, 13 Sep 95 09:36:33 -0700
Question on design of heat-reliefs	Wally Doeling (wallyd)	Fri, 15 Dec 95 11:01:00 PST
Question:Etcher Goop (fwd)	Thomas Dammrich	Sat, 6 May 1995 20:38:26 -0500 (CDT)
Question:TOC on cupric (fwd)	Thomas Dammrich	Sat, 6 May 1995 20:39:14 -0500 (CDT)
RE" Cleanliness Correlation	Mary Davis	26 Sep 1995 12:30:34 -0600
Re.: How do you handle multiple assemblies?	Fouquet, Alain	Wed, 11 Oct 1995 13:09:00 -0400 (EDT)
RE2: PCBA Ionic Contamination Levels	Crawford, John A.	Tue, 17 Oct 95 13:16:00 EST
RE; How do we compare	ScicardsR user id	Wed, 25 Oct 95 09:30:33 EDT
Reflow FAQ's	Robert Willis	20 Sep 95 08:00:01 EDT
RELEASE FILM USED IN MULTILAYER LAMINATION	<>	Fri, 14 Jul 95 09:26:03 PDT
Re: Reliability of Ni/Au, PCB Finishes	Karl Sauter	Fri, 8 Dec 1995 10:50:27 +0800
Reliability of Ni/Au, PCB Finishes	Kevin Berry	Fri, 08 Dec 95 13:11:20 PST
Reliability of SM Solder Joints	Terry Davey	Fri, 6 Oct 1995 17:52:02 +0100
Re[2]: Removal of non-functional pads	<>	Wed, 28 Jun 95 09:42:48 MST
Re: Removal of non-functional pads	R_R_HOLMES	27 Jun 95 16:47:37 -0400
Removal of non-functional pads	jbaumgar	Mon, 26 Jun 95 14:03:28 CST
Re: Removal of non-functional...	R_R_HOLMES	27 Jun 95 17:05:19 -0400
Re: Removal of non-functional...	<>	Tue, 27 Jun 95 14:52:39 EST
Re: Removal of non-functional...	<>	Tue, 27 Jun 1995 10:52:40 -0400
Re: repairing scratched FR-4	Crawford, John A.	Fri, 06 Oct 95 09:58:00 EST
Re: repairing scratched FR-4	<>	Wed, 4 Oct 1995 21:48:22 -0400
RE: repairing scratched FR-4	Crawford, John A.	Wed, 04 Oct 95 14:27:00 EST
Re: repairing scratched FR-4	Mike Buetow	Wed, 4 Oct 1995 13:30:24 -0500 (CDT)
repairing scratched FR-4	<>	Tue, 3 Oct 1995 22:23:12 -0400
Replacement for Au Contacts	Seppanen Gordy	29 Oct 1995 12:07:12 U
Re: Reply to All job postings	Tom Vaillancourt 3482	Thu, 10 Aug 95 07:45:32 EDT
Re: Reply to All job postings	<>	Wed, 09 Aug 95 18:49:20 EST
Re: Reply to All job postings	<>	Wed, 09 Aug 95 12:37:54
Re: Reply to All job postings	Thad McMillan	Wed, 09 Aug 95 14:45:53 CST
Reply to All job postings	Eric Russell	Wed, 9 Aug 1995 12:18:38 -0500
request for details	denise rooke	Sat, 02 Dec 95 11:45:44 -0800
Re: Res-Nets	Dean Barham, x3805/p-0217	Mon, 28 Aug 1995 16:05:51 -0500 (EST)
Res-Nets	<>	Mon, 28 Aug 95 08:13:02
resdistribute HTE inner copper foil	<>	Tue, 28 Nov 95 07:39:42 dst
Fwd: Returned mail	<>	Mon, 20 Nov 1995 18:31:38 -0500
Returned Mail	LISA GREENLEAF	22 Aug 1995 11:25:28 -0500
Re: Returned mail: Host unknown (Name server: engult: host not found)	Dave Ball	Tue, 11 Jul 95 16:38:45 CDT
Re: rework simulation test method	<>	Tue, 17 Oct 95 14:39:48 dst
rework simulation test method	<>	Mon, 16 Oct 1995 15:41:52 -0400
Rework Simulation Test Method	<>	Fri, 15 Sep 1995 11:51:41 -0400
Rework Wire Attachment	Evaltine	Tue, 29 Aug 1995 17:30:22 -0400 (EDT)
Re: Rework Wire Attachment	Peter Swanson	Tue, 29 Aug 1995 08:47:36 GMT
Fwd: Rework Wire Attachment	Thole, Lothar	Tue, 29 Aug 1995 14:37 WAT
Re: Rework Wire Attachment	Andrew P Magee	Mon, 28 Aug 95 13:18 EST
Re: Rework Wire Attachment	Jim Marsico	Mon, 28 Aug 95 16:34:01 -0400
Rework Wire Attachment	<>	Mon, 28 Aug 95 10:44:25 EST
Reworking BGAs	<>	Thu, 13 Jul 1995 07:19:01 -0400
Reworking BGAs	<>	Wed, 12 Jul 95 15:34:13 EST
RF PTFE Product	<>	Tue, 13 Jun 95 13:58:39 EDT
Rhode Island	<>	Thu, 05 Oct 95 16:49:25 MST
Re[2]: Rigid Flex Referral	Andrew P Magee	Tue, 12 Sep 95 10:27 EST
Re: Rigid Flex Referral	<>	Fri, 8 Sep 1995 09:36:13 -0400
Re: Rigid Flex Referral	Andrew P Magee	Thu, 7 Sep 95 18:09 EST
Rigid Flex Referral	Steve Joy	Thu, 07 Sep 95 13:21:53 -0700
Re: Rigid/Flex: Open Circuits	Thad McMillan	Mon, 18 Sep 95 00:44:15 CST
Re: Rigid/Flex: Open Circuits	Andrew P Magee	Fri, 15 Sep 95 14:42 EST
re: Rigid/Flex: Open Circuits	<>	Fri, 15 Sep 95 12:06:21 EDT
Rigid/Flex: Open Circuits	<>	Thu, 14 Sep 1995 21:10:39 -0400
re:rim voids	Lyle Anderson	Tue, 26 Dec 1995 17:58:42 -0700
Re: RS274-X format	ScicardsR user id	Tue, 24 Oct 95 07:48:08 EDT
Re: RS274-X format	Jerry Cupples	Fri, 20 Oct 1995 21:55:28 -0500
RS274-X format	JBAUMGAR	Fri, 20 Oct 95 07:55:36 CST
RS274X	George Murray	Wed, 29 Nov 95 13:27:52 EST
RS274X	Al Slagle	Tue, 31 Oct 95 08:10:17 MST
RS274X data/Embedded aperture format	MR DOUGLAS C JEFFERY	Sun, 22 Oct 1995 06:43:44 EDT
Re: S-815	David Bergman	Fri, 11 Aug 1995 11:18:59 -0500 (CDT)
S-815	Moffitt, James H.	Fri, 11 Aug 95 10:43:00 EST
Re: SAE specifications for printed circuit boards	David Bergman	Thu, 14 Dec 1995 11:01:14 -0600 (CST)
SAE specifications for printed circuit boards	Chuck Yowell	Thu, 14 Dec 95 10:04:46 EST
Re: scanning artwork contact	<>	Fri, 18 Aug 1995 17:04:10 -0400
scanning artwork contact	Robert Blomstrom	Thu, 17 Aug 95 16:45:19 EDT
Re:Schematic Symbols [Unidentified subject!]	Mike Buetow	Tue, 9 May 1995 17:44:11 -0500 (CDT)
Re:Schematic Symbols [Unidentified subject!]	Tom Martin 3408	Tue, 9 May 95 15:42:59 EDT
Re: Scoremarks and break-out lugs	Pat McGuine	Mon, 01 May 1995 08:49:22 -0500
Re: Scoremarks and break-out lugs	<>	Fri, 28 Apr 95 12:41:32 PST
Re: Scoremarks and break-out lugs	John Laur	Fri, 28 Apr 95 14:02:52 CDT
Scoremarks and break-out lugs	brendan mccormack	Fri, 28 Apr 1995 16:37:11 +0100 (WET DST)
re: Seeking advice on OSP implementation	Robert Willis	23 Dec 95 11:47:00 EST
re: Seeking advice on OSP implementation	<>	Fri, 22 Dec 95 08:35:50 PST
Re: Seeking advice on OSP implementation	David Bergman	Tue, 12 Dec 1995 22:37:21 -0600 (CST)
Seeking advice on OSP implementation	<>	Tue, 12 Dec 95 16:59: 7 CST
Re: Seeking Thru-hole/SMT reference material	Mike Buetow	Thu, 5 Oct 1995 11:18:56 -0500 (CDT)
Seeking Thru-hole/SMT reference material	Chris Stack	Thu, 05 Oct 95 08:12:47
Re: Selective Gold Plating	technet-request	Fri, 27 Oct 1995 12:11:40 -0400
Selective Gold Referral	<>	Wed, 13 Sep 95 15:11:37 EST
Selective Gold Referral	Steve Joy	Wed, 13 Sep 95 06:41:26 -0700
semiconductor die attach methods	Jim Moffat	Tue, 10 Oct 95 09:47:17 -700
Shadow problems, help!!	LANmark Circuits Inc.	Tue, 31 Oct 1995 09:53:38 -0800
Sheets of solder wick?	Doug Ondricek	Wed, 16 Aug 95 09:31:50 -0500
Re: Shelf Life of Pre-Tinned Leadless Components	<>	09 May 95 09:25:00 -5218
Shelf Life of Pre-Tinned Leadless Components	Krebs, Dan	Tue, 09 May 95 07:23:00 PDT
RE: Single ply dielectric and "green" laminate	<>	Thu, 25 May 95 09:52:50 EST
Re: single ply dielectric and "green" laminate	R_R_HOLMES	24 May 95 10:18:06 -0400
single ply dielectric and "green" laminate	George Wheadon	22 May 95 18:28:11 EDT
Re: single sheet	Jeff Deeney	Fri, 9 Jun 95 13:57:40 MDT
single sheet	R_R_HOLMES	9 Jun 95 11:05:09 -0400
SIR	R_R_HOLMES	21 Sep 95 13:07:38 -0400
SIR	R_R_HOLMES	20 Sep 95 15:10:09 -0400
SIR manual	<>	Fri, 17 Nov 1995 20:52:28 -0500
Re: SIR Manual	dmitchel	Wed, 15 Nov 95 08:38:23 PST
SIR Task Group Meeting	<>	Fri, 20 Oct 1995 14:24:39 -0400
Re: SIR Test Book	<>	Mon, 20 Nov 1995 08:56:39 -0500
Re: SIR Test Methods	<>	Wed, 20 Sep 1995 13:38:53 -0400
Re: SIR Test Methods	R_R_HOLMES	20 Sep 95 08:49:03 -0400
SIR Test Methods	BECKMAN_SJ	Tue, 19 Sep 95 12:02:29 EST
SIR Testing	<>	Wed, 20 Sep 1995 16:23:03 -0400
Slip Ring Source	<>	Wed, 7 Jun 95 16:15:41 EDT
SLIP RING SOURCE	<>	Wed, 7 Jun 95 12:58:03 EDT
Re: SM SKIP IN CURTAINCOAT PROCESS	<>	Thu, 27 Jul 1995 22:45:45 -0400
Re: SM SKIP IN CURTAINCOAT PROCESS	Robert Willis	27 Jul 95 13:30:38 EDT
Re: SM SKIP IN CURTAINCOAT PROCESS	<>	Mon, 24 Jul 95 10:03:48 EST
SM SKIP IN CURTAINCOAT PROCESS	<>	Sat, 22 Jul 95 11:28:29 EST
SM SKIP IN CURTAINCOAT PROCESS	<>	Sun, 16 Jul 95 12:57:13 EST
Re: Small quantities of taped parts on auto-P&P machine	ANDY RICHARDSON	Mon, 17 Jul 1995 12:35:10 GMT
Small quantities of taped parts on auto-P&P machine	<>	Thu, 13 Jul 95 12:56:13 PST
SMART Group Cleraning Survey	Robert Willis	02 Dec 95 03:09:53 EST
SMT Accel Reliability Testing	Crawford, John A.	Wed, 11 Oct 95 15:54:00 EST
SMT Bond Strength Testing per IPC-TM-650, 2.4.21.1	APeder01	18 Oct 1995 12:57:12 EST
smt fine pitch mods	Robert Blomstrom	Tue, 19 Sep 95 16:47:29 EDT
SMT Market (fwd)	Peter Swanson	Tue, 25 Jul 1995 14:56:40 GMT
smt pca bd temp sticker	Mitch Austin	Wed, 20 Sep 95 08:20:28 CDT
Re: SMT PCA Bd Temp Sticker	delsen testing laboratories inc.	Tue, 19 Sep 1995 17:08:34 -0700
RE: SMT PCA Bd Temp Sticker	Crawford, John A.	Tue, 19 Sep 95 15:20:00 EST
SMT PCA Bd Temp Sticker	Karl Sauter	Tue, 19 Sep 1995 11:12:13 +0800
SMT PWB DESIGN	Jim Marsico	Wed, 25 Oct 95 19:41:01 -0400
SMT Reflow of PTH parts	Wedemeyer, Ron	Mon, 17 Jul 1995 08:04 WAT
Re: SMT reflow on 20 mil pitch pads	<>	Tue, 29 Aug 95 11:35:27
Re: SMT reflow on 20 mil pitch pads	John Nelson	Tue, 29 Aug 1995 12:25:07 -0400 (EDT)
SMT reflow on 20 mil pitch pads	Etidwell	Tue, 29 Aug 95 09:23:37 CST
RE: SMT solder defect rates	Yuen, Mike	Tue, 10 Oct 95 12:08:00 CDT
SMT solder defect rates	Jerry Cupples	Mon, 9 Oct 1995 16:17:41 -0500
Re: SO14W TO SO14 ADAPTER	Pat McGuine	Mon, 01 May 1995 11:59:57 -0500
SO14W TO SO14 ADAPTER	Botts, Dan	Thu, 27 Apr 1995 08:43 EST
Re: SOIC to Dip Adapters	Jerry Cupples	Fri, 13 Oct 1995 17:16:14 -0500
Re: SOIC to Dip Adapters	Pat McGuine	Fri, 13 Oct 1995 15:19:58 -0500
SOIC to Dip Adapters	BOB HOENE	Fri, 13 Oct 1995 09:56:07 -0600
Solder balls	Kenneth R Kirby	Mon, 04 Dec 95 08:34:00 PST
Solder balls	Kenneth R Kirby	Fri, 01 Dec 95 08:40:00 PST
Re: Solder Balls	David Christopher Whalley	Mon, 1 May 95 09:24:15 bst
Re: Solder Balls	brendan mccormack	Fri, 28 Apr 1995 16:12:00 +0100 (WET DST)
Re: Solder Balls and Solder Mask	<>	Mon, 18 Dec 1995 19:52:07 -0500
Re: Solder Balls and Solder Mask	Jerry Cupples	Mon, 18 Dec 1995 13:44:41 -0600
Solder Balls and Solder Mask	Stephen C Joy	Mon, 18 Dec 95 08:58:00 PST
FWD: Solder balls....	Andy Richardson	Thu, 21 Sep 1995 09:00:38 GMT
Solder balls....	<>	Wed, 20 Sep 95 11:37:27
Solder Beads on Pasive Components	Robert Willis	04 Jun 95 13:22:03 EDT
Re[4]: Solder Bridges on SMT SOIC's	<>	Fri, 04 Aug 95 12:39:19 PST
Re[3]: Solder Bridges on SMT SOIC's	<>	Thu, 03 Aug 95 17:05:11
Re[2]: Solder Bridges on SMT SOIC's	<>	Thu, 03 Aug 95 12:56:07
re: Solder Bridges on SMT SOIC's	ANDY RICHARDSON	Mon, 31 Jul 1995 08:33:21 GMT
Solder Bridges on SMT SOIC's	Robert Willis	27 Jul 95 13:05:53 EDT
Solder Bridges on SMT SOIC's	<>	Tue, 25 Jul 95 13:27:14
Re: Solder Float/Shock Testing	Andrew P Magee	Tue, 22 Aug 95 18:19 EST
Re: Solder Float/Shock Testing	<>	Tue, 22 Aug 95 15:24:12 dst
Re: Solder Float/Shock Testing	<>	Tue, 22 Aug 1995 18:07:34 -0400
Re: Solder Float/Shock Testing	<>	Tue, 22 Aug 95 14:14:02
Solder Float/Shock Testing	<>	Tue, 22 Aug 1995 13:46:50 -0400
Solder Float/Shock Testing	<>	Tue, 22 Aug 1995 13:33:55 -0400
Solder Levelling Thickness	Supplier Quality Engineering Cork	19 May 95 08:55 GMT
Re: solder mask criteria question	<>	Tue, 22 Aug 95 16:35:56 EST
Re: solder mask criteria question	R_R_HOLMES	21 Aug 95 08:47:15 -0400
solder mask criteria question	<>	Thu, 17 Aug 95 08:48:47 PDT
Re: Solder Paste Printing "Snap-off".......	<>	Wed, 26 Apr 95 07:29:03
Solder Paste Printing "Snap-off".......	<>	Tue, 25 Apr 95 13:45:10
solder resist adhesion promoters	<>	Wed, 16 Aug 1995 07:36:41 -0400
Re: Solder Side Actives	Tom Crofford	Wed, 25 Oct 1995 08:55:31 -0500
Solder Side Actives	Robert Willis	21 Oct 95 08:51:12 EDT
Solder Side Actives	Wedemeyer, Ron	Thu, 19 Oct 1995 08:20 WAT
Solder Smear	<>	Wed, 4 Oct 1995 23:11:34 -0400
RE: Solder splashes.	Crawford, John A.	Fri, 20 Oct 95 08:17:00 EST
Solder splashes.	<>	Thu, 19 Oct 95 11:29:19 CST
Re[2]: Solder Under IC's	<>	Tue, 12 Sep 95 13:28:48
Re: Solder Under IC's	<>	Tue, 12 Sep 95 14:59:03 EST
Re: Solder Under IC's	<>	Tue, 12 Sep 95 13:39:09 EST
Solder Under IC's	Robert Willis	08 Sep 95 15:27:56 EDT
Solder Under IC's	<>	Thu, 07 Sep 95 16:41:40 EST
Re: Solder under SOIC and SOJ packages	Todd Zorn	Wed, 16 Aug 95 06:56:35 CDT
Solder under SOIC and SOJ packages	<>	Tue, 15 Aug 95 19:47:44 EST
solder wave stress	Jeffery L. Hempton	Sun, 22 Oct 1995 08:49:30 -0500
Re: Solderability Heat Test	<>	Fri, 27 Oct 1995 10:53:02 -0400
Solderability Heat Test	<>	Wed, 25 Oct 95 07:10:30 PST
Re: Solderability of Component Lead	David Bergman	Mon, 18 Dec 1995 08:37:58 -0600 (CST)
Solderability of Component Lead	<>	Fri, 15 Dec 95 16:52:52 PST
Re[2]: Solderability of Electrolytic Tin Plating	<>	Fri, 29 Sep 95 13:20:42 EST
Re: Solderability of Electrolytic Tin Plating	John Nelson	Wed, 27 Sep 1995 14:06:19 -0400 (EDT)
Solderability of Electrolytic Tin Plating	<>	Wed, 27 Sep 1995 11:34:43 -0400
Solderable Finishes report	Robert Willis	06 Dec 95 04:03:07 EST
Solderballs/Airknife Solution	Pat McGuine	Thu, 21 Dec 1995 16:11:48 -0600
soldering gold pcb,s	<>	Fri, 6 Oct 1995 16:31:56 -0400
Re: soldering gold pcb,s	<>	Fri, 6 Oct 1995 13:26:53 -0400
Re: soldering gold pcb,s	Karl Sauter	Fri, 6 Oct 1995 09:44:36 +0800
soldering gold pcb,s	ETHIER_SA	Fri, 06 Oct 95 10:46:40 EST
Re: Soldering iron discussions (long)	Jerry Cupples	Mon, 4 Dec 1995 19:15:22 -0600
Soldering Metal Core IAW ANSI/J-STD-001	JWeiss	21 Nov 1995 11:10:11 EST
Soldering rigid-flex PWBs	<>	Tue, 15 Aug 1995 22:42:29 -0400
Re: Soldering tips	<>	Sat, 26 Aug 1995 08:12:40 -0400
Soldering tips	<>	Fri, 25 Aug 1995 16:21:49 -0500
Re: FW: Soldering to Gold	Jerry Cupples	Fri, 15 Dec 1995 19:27:18 -0600
FW: Soldering to Gold	Crawford, John A.	Fri, 15 Dec 95 13:57:00 EST
Re: Soldering to Gold	Karen Tellefsen	Tue, 12 Dec 1995 21:32:09 -0500
Soldering to Gold	Sherman Banks	Tue, 12 Dec 1995 10:59 PST
Re: soldermask adhesion	<>	Tue, 29 Aug 1995 22:35:12 -0400
Re: soldermask adhesion	jbaumgar	Wed, 16 Aug 95 09:33:48 CST
Re: Soldermask chemical resis...	<>	Sat, 5 Aug 1995 08:04:06 -0400
Soldermask chemical resistance	<>	Fri, 4 Aug 1995 12:30:46 +0200
Soldermask via coverage (URGENT)	<>	Thu, 04 May 95 15:38:35 PST
Soldermask via coverage (URGENT)	<>	Wed, 03 May 95 15:54:13 PST
Solid fill area vs Cross-hatched fill area	jbaumgar	Fri, 14 Jul 95 09:07:57 CST
RE: solubility of gold into solder pot from Ni-Au board	Seppanen Gordy	8 Sep 1995 14:09:56 U
solubility of gold into solder pot from Ni-Au board	<>	Fri, 08 Sep 95 12:06:22 PST
RE: solubility of gold into solder pot from Ni-Au board	Jerry Cupples	Fri, 8 Sep 1995 13:55:31 -0500
RE: solubility of gold into solder pot from Ni-Au board	Seppanen Gordy	8 Sep 1995 13:27:04 U
Re: solubility of gold into solder pot from Ni-Au board	Jerry Cupples	Fri, 8 Sep 1995 11:18:06 -0500
Re: solubility of gold into solder pot from Ni-Au board	<>	Thu, 31 Aug 1995 22:07:12 -0400
solubility of gold into solder pot from Ni-Au board	<>	Tue, 29 Aug 95 08:35:26 PST
solubility of gold into solder pot from Ni-Au board	<>	Thu, 31 Aug 95 01:54:34 EDT
Re: solubility of gold into solder pot from Ni-Au board	<>	Tue, 29 Aug 95 13:44:55
Re: solubility of gold into solder pot from Ni-Au board	<>	Tue, 29 Aug 95 13:09:55
solubility of gold into solder pot from Ni-Au board	<>	Tue, 29 Aug 95 08:35:26 PST
SOT23 for LEDs	Dan T King	Tue, 19 Sep 1995 12:42:31 -0800 (pst)
Re: Source for 'Kapak' Bags	<>	Fri, 16 Jun 1995 17:41:53 -0400
Source for 'Kapak' Bags	Mary Davis	15 Jun 1995 18:57:50 -0600
Re: Source for Peelable Mask	Mickey Weiner (2937)	Mon, 28 Aug 1995 10:13:22 +0300 (IDT)
Re: Source for Peelable Mask	<>	Fri, 25 Aug 1995 12:18:27 -0400
Re: Source for Peelable Mask	<>	Fri, 25 Aug 95 12:17:10 EST
Re: Source for Peelable Mask	<>	Fri, 25 Aug 1995 12:02:42 -0400
Re: Source for Peelable Mask	Michael Barmuta	Fri, 25 Aug 1995 07:46:45 DST
Re: Source for Peelable Mask	<>	Fri, 25 Aug 95 10:14:25 EST
Re: Source for Peelable Mask	<>	Thu, 24 Aug 1995 21:37:20 -0400
Source for Peelable Mask	Glynn Shaw	Thu, 24 Aug 1995 13:22:08 -0700
Re: Source for Peelable Mask (fwd)	Mickey Weiner (2937)	Mon, 28 Aug 1995 15:16:04 +0300 (IDT)
SPC Stategies	Thomas Dammrich	Mon, 26 Jun 1995 10:12:05 -0500 (CDT)
Re[2]: Splicing of SMT component tape	ETHIER_SA	Sun, 03 Dec 95 09:27:40 EST
RE: Splicing of SMT component tape	Crawford, John A.	Fri, 01 Dec 95 13:48:00 EST
Re: Splicing of SMT component tape	Jerry Cupples	Thu, 30 Nov 1995 10:10:07 -0600
Splicing of SMT component tape	Leo Reynolds	Wed, 29 Nov 1995 11:05:58 -0800
Re: Splicing of SMT Tape	Jim Marsico	Thu, 30 Nov 95 11:36:01 -0500
SRT Rework Station	Miles Littlefield	28 Apr 95 15:00:45 EDT
standards	Lissa R Galbraith	01 Dec 1995 10:13:00 -0800
RE: Static damage	David Christopher Whalley	Tue, 25 Jul 95 10:49:58 bst
Static damage	Thole, Lothar	Fri, 14 Jul 1995 16:34 WAT
Static susceptibility test standards	Mitch Austin	Tue, 10 Oct 95 14:54:22 CDT
Re: Stencil "pad" designs for adhesive application	Robert Willis	22 Dec 95 03:05:36 EST
Re: Stencil "pad" designs for adhesive application	<>	Thu, 21 Dec 1995 10:36:14 -0500
Re: Stencil "pad" designs for adhesive application	Jerry Cupples	Tue, 19 Dec 1995 13:49:58 -0600
Stencil "pad" designs for adhesive application	Charles Barker/IO-US	19 Dec 95 9:42:27
Re: Storage of SMT components	Peter Swanson	Thu, 14 Sep 1995 08:52:32 GMT
Re: Storage of SMT components	Jerry Cupples	Wed, 13 Sep 1995 18:55:38 -0500
Storage of SMT components	<>	Wed, 13 Sep 95 15:43:57 PST
Re: Storage of SMT components	Mike Buetow	Wed, 13 Sep 1995 16:50:16 -0500 (CDT)
Storage of SMT components	Leo Reynolds	Wed, 13 Sep 1995 12:59:17 -0700
Supercritical CO2 Cleaning	Michael Fenner	18 Dec 95 19:21:39 EST
Supercritical CO2 Cleaning	Wrezel Jim	13 Dec 1995 09:46:17 -0600
Re: Surface Mount Jumpers	<>	Sat, 2 Dec 1995 10:29:10 -0500
Re: Surface Mount Jumpers	Jesse, Ed	Thu, 30 Nov 95 13:21:44 EST
Re: Surface Mount Jumpers	Jerry Cupples	Thu, 30 Nov 1995 17:45:50 -0600
Re: Surface Mount Jumpers	Martin Kennett, Design Engineer	Thu, 30 Nov 95 10:30 CST
Surface Mount Jumpers	<>	Tue, 28 Nov 95 16:25:38 EST
Re: SURFACE solid fill vs. crosshatched fill	Mike McNulty	Wed, 19 Jul 1995 18:04:30 -0400
SURFACE solid fill vs. crosshatched fill	Robert Blomstrom	Wed, 19 Jul 95 10:29:25 EDT
Re: Surface Waviness or Surface roughness for CCL	<>	Wed, 10 May 1995 09:44:03 -0400
Re: Surface Waviness or Surface roughness for CCL	David Bergman	Tue, 9 May 1995 12:41:26 -0500 (CDT)
Surface Waviness or Surface roughness for CCL	hidenori nagaoka	Tue, 9 May 1995 08:41:38 +0900
Re: SURVEY	Thad McMillan	Fri, 28 Apr 95 16:14:40 CST
SURVEY	Letsinger, John F.	Fri, 28 Apr 95 13:23:00 EST
Re: Survey re Job Postings	<>	Tue, 8 Aug 1995 07:16:30 -0400
Re: Survey re Job Postings	Thad McMillan	Mon, 07 Aug 95 16:22:48 CST
Re: Survey re Job Postings	<>	Mon, 7 Aug 1995 17:05:56 -0400
Re: Survey re Job Postings	<>	Mon, 07 Aug 95 10:38:22 MST
Re: Survey re Job Postings	Jack Holm	Mon, 7 Aug 95 10:00:59 CDT
Re: Survey re Job Postings	<>	Mon, 07 Aug 95 07:15:59 PST
Re: Survey re Job Postings	Tom Vaillancourt 3482	Mon, 7 Aug 95 08:37:36 EDT
Re: Survey re Job Postings	<>	Sat, 05 Aug 95 16:28:02
Re: Survey re Job Postings	<>	Sat, 5 Aug 1995 18:12:46 -0400
Survey re Job Postings	Glynn Shaw	Sat, 5 Aug 1995 12:46:35 -0700
System level PCBA allowable flex	James Bell	Wed, 18 Oct 95 09:50:59 CST
Re: Tantalum Capacitor Substitutes	Jerry Cupples	Thu, 21 Dec 1995 17:09:27 -0600
Tantalum Capacitor Substitutes	Terry Davey	Thu, 21 Dec 1995 20:09:34 +0000
Tape Feeders	Snider, Scott	Wed, 13 Dec 95 12:32:00 MST
Re: TDR coupons	<>	Tue, 05 Sep 95 12:40:06 EST
TDR coupons	MR DOUGLAS C JEFFERY	Sat, 02 Sep 1995 08:05:03 EDT
Re: TDR test frequency	<>	Tue, 25 Jul 1995 17:01:38 -0400
Re: TDR test frequency	<>	Tue, 25 Jul 1995 12:07:59 -0400
TDR Test Frequency	Harry Parkinson DTN 264-6760	Tue, 25 Jul 95 10:32:05 EDT
Re: TDR test frequency	R_R_HOLMES	25 Jul 95 07:12:11 -0400
TDR test frequency	hbrown	Mon, 24 Jul 95 13:18:43 PST
TechCon 95	<>	Sun, 29 Oct 1995 17:57:14 -0500
Re: TechNet - SMT & Micro Vias	Gary Boccoleri	Fri, 22 Sep 1995 08:52:27 -0700
Re: TechNet inquiry re: immersion gold reliability if not soldered	Robert Willis	26 Aug 95 05:36:27 EDT
Re: TechNet inquiry re: immersion gold reliability if not soldered	<>	Fri, 25 Aug 95 16:07:43 CDT
Re: TechNet Questions - Assembly Yields	<>	Mon, 18 Dec 1995 12:06:32 -0500
Re: TechNet Questions - Assembly Yields	denise rooke	Sat, 16 Dec 1995 23:42:36 -0500 (EST)
[log in to unmask]	Bill Watson	7 Dec 1995 16:14:03 -0800
Re: Temperature Sensing Inks	Peter Swanson	Thu, 28 Sep 1995 09:51:59 GMT
Re: Temperature Sensing Inks	Pat McGuine	Wed, 27 Sep 1995 12:09:03 -0500
Re: Temperature Sensing Inks	Greg Mahan	Wed, 27 Sep 1995 09:35:54 -0700
Temperature Sensing Inks	Glynn Shaw	Wed, 27 Sep 1995 08:22:35 -0700
Re: Tenting via holes	sbryan	Fri, 08 Dec 95 11:46:10 PST
Re: Tenting via holes	Jerry Cupples	Thu, 7 Dec 1995 13:06:43 -0600
Tenting via holes	Bill Bromley	Thu, 7 Dec 95 11:06 EST
Re: TEST COUPONS	<>	Tue, 24 Oct 1995 16:27:08 -0400
Re: TEST COUPONS	<>	Tue, 24 Oct 1995 09:39:27 -0400
Test Coupons	<>	Fri, 20 Oct 95 22:02:40 EST
TEST COUPONS	Al Slagle	Fri, 20 Oct 95 15:14:49 MDT
Test Questions Development	Janice Lund	Fri, 22 Dec 1995 11:28:42 -0500
Test Questions Development	MR NORMAN S EINARSON	Thu, 21 Dec 1995 15:44:16 EST
Re: Testing Rigid-Flex Mother Boards	Jon Holmen	Mon, 10 Jul 1995 14:11:44 -0500 (CDT)
Testing Rigid-Flex Mother Boards	<>	Mon, 10 Jul 1995 08:16:44 MST
Thermal Cycling	Bill Fabry	5 Oct 1995 18:22:37 -0800
Re: Thermal Relief Design	Mike Buetow	Mon, 31 Jul 1995 13:29:06 -0500 (CDT)
Thermal Relief Design	Pat McGuine	Mon, 31 Jul 1995 10:31:49 -0500
Thermal Relief Design	Pat McGuine	Mon, 31 Jul 1995 10:31:49 -0500
Re: Thermal Relief on Vias	<>	Thu, 14 Sep 1995 10:49:36 -0400
Thermal Relief on Vias	MR DOUGLAS C JEFFERY	Thu, 14 Sep 1995 06:27:57 EDT
Thermal Relief on Vias	<>	Sun, 10 Sep 95 19:29:50 EST
Thermal Relief on Vias	Karl Sauter	Fri, 8 Sep 1995 09:15:18 +0800
Thermal Relief on Vias	Karl Sauter	Thu, 7 Sep 1995 18:39:21 +0800
Thermocouple attachment	<>	Thu, 28 Sep 1995 17:27:39 -0500
thru-hole ir-reflow soldering	Phil Belliveau	Thu, 25 May 95 16:34:05
Time Reduction of SIR Testing	<>	Fri, 27 Oct 95 21:09:22 PST
Time Reduction of SIR Testing	<>	Fri, 20 Oct 95 17:37:28 PST
Time Reduction of SIR Testing	<>	Tue, 22 Aug 95 08:38:13 PST
Re: Time Reduction of SIR Testing	<>	Mon, 21 Aug 95 13:39:09 dst
Time Reduction of SIR Testing	<>	Mon, 21 Aug 95 12:10:43 PST
Re: Tin/lead plating vs HAL	David Bergman	Mon, 15 May 1995 09:16:52 -0500 (CDT)
Re: Tin/lead plating vs HAL	Thad McMillan	Fri, 12 May 95 11:15:14 CST
Tin/lead plating vs HAL	<>	Thu, 11 May 95 17:26:54 EDT
Tin/lead plating vs HAL	MR DOUGLAS C JEFFERY	Thu, 11 May 1995 06:47:38 EDT
Re: Tin/tin vs. Tin/gold sockets	Mickey Weiner (2937)	Wed, 26 Jul 1995 08:30:53 +0300 (IDT)
Re: Tin/tin vs. Tin/gold sockets	John Laur	Mon, 31 Jul 95 12:59:51 CDT
Re: Tin/tin vs. Tin/gold sockets	Mickey Weiner (2937)	Wed, 26 Jul 1995 08:30:53 +0300 (IDT)
Re: Tin/tin vs. Tin/gold sockets	<>	Mon, 31 Jul 95 12:02:53 EDT
Re: Tin/tin vs. Tin/gold sockets	<>	Thu, 27 Jul 1995 22:41:47 -0400
Re: Tin/tin vs. Tin/gold sockets	Mickey Weiner (2937)	Wed, 26 Jul 1995 08:30:53 +0300 (IDT)
Tin/tin vs. Tin/gold sockets	Tom Tindale	Thu, 20 Jul 95 11:37:13 EDT
Tinning with Low Residue Flux	Ed Hare	Wed, 07 Jun 95 16:27:00 PDT
Re: TINNING WITH LRF	<>	Fri, 9 Jun 1995 14:01:24 -0400
RE: TINNING WITH LRF	Jim Marsico	Fri, 09 Jun 95 11:36:01 -0400
Re: Top of pad measurements	Bob Trinnes	Wed, 13 Dec 95 15:14:28 EST
Top of pad measurements	sbryan	Mon, 11 Dec 95 14:36:13 PST
Topside Temp. during assembly	brendan mccormack	Wed, 5 Jul 1995 15:47:30 +0100 (WET DST)
RE: Torque	Thorson, Kevin J @EAG	Mon, 16 Oct 95 10:10:00 CST
Re: Torque	David Christopher Whalley	Mon, 16 Oct 95 12:25:00 bst
Re: Torque	<>	Fri, 13 Oct 95 12:05:03
Re: Torque	Mike McNulty	Fri, 13 Oct 1995 13:43:28 -0400
Re: Torque	Jerry Cupples	Fri, 13 Oct 1995 12:13:34 -0500
Torque	Mike Cussen	Fri, 13 Oct 95 07:36 EDT
Re: Trace Elements in Legend Ink	<>	Fri, 25 Aug 1995 18:04:58 -0400
Re: Trace Elements in Legend Ink	Jon Holmen	Fri, 25 Aug 1995 12:50:32 -0500 (CDT)
Re: Trace Elements in Legend Ink	<>	Fri, 25 Aug 1995 07:59:13 -0400
Re: Trace Elements in Legend Ink	<>	Thu, 24 Aug 1995 21:39:18 -0400
Trace Elements in Legend Ink	<>	Thu, 24 Aug 95 16:15:31 CDT
Re: Training programs	<>	Mon, 17 Jul 1995 20:28:37 -0400
Training programs	Greg Anderson	Mon, 17 Jul 95 17:30:00 EDT
Re[2]: transition to fine pitch	<>	Wed, 05 Jul 95 14:54:09
Re: transition to fine pitch	<>	Wed, 05 Jul 95 09:53:23 dst
Re: transition to fine pitch	Pat McGuine	Wed, 05 Jul 1995 10:30:40 -0500
transition to fine pitch	Mitch Austin	Wed, 5 Jul 95 08:56:18 CDT
Re: Ultr Fine Lines/Vias	<>	Tue, 24 Oct 1995 01:09:32 -0400
Ultr Fine Lines/Vias	MR NORMAN S EINARSON	Mon, 23 Oct 1995 11:24:19 EDT
Re: Ultra-fine lines/small via's	Bill Gaines B160 x2199	Fri, 27 Oct 95 07:11:10 PDT
Re: Ultra-fine lines/small via's	<>	Fri, 27 Oct 1995 00:10:19 -0400
Ultra-fine lines/small via's	MR NORMAN S EINARSON	Thu, 26 Oct 1995 17:43:57 EDT
Underwriter's Laboritories Test Patterns (IPC-A-22)	Kyle Blaney	Wed, 12 Jul 95 16:09:55 -0700
Unidentified subject!	Martin Kennett, Design Engineer	Tue, 5 Dec 1995 12:37:01 -0600
Unidentified subject!	jyoung	Thu, 28 Sep 95 16:52:16 PST
Unidentified subject!	Cy Holmes	Sun, 13 Aug 95 18:14:27 200
Unidentified subject!	Tom Vaillancourt 3482	Thu, 27 Jul 95 12:17:30 EDT
Unidentified subject!	Tom Vaillancourt 3482	Thu, 27 Jul 95 11:03:27 EDT
Unidentified subject!	<>	Tue, 09 May 95 17:08:00 PST
Unidentified subject!	Mike Gnieski	Tue, 9 May 95 13:34:17 EDT
Unidentified subject!	Mike Gnieski	Tue, 9 May 95 13:34:17 EDT
Unidentified subject!	<>	Tue, 02 May 1995 16:38:00 +0000
Re: Upcoming events	David Bergman	Wed, 16 Aug 1995 13:16:05 -0500 (CDT)
Upcoming events	<>	Sat, 12 Aug 1995 22:02:43 -0400
urethane conformal coating	Robert Blomstrom	Wed, 2 Aug 95 10:59:57 EDT
Re: Used Microscopes ?	<>	Mon, 18 Dec 1995 06:39:54 -0500
Re: Used Microscopes ?	<>	Sat, 16 Dec 1995 05:44:58 -0500
Re: Used Microscopes ?	<>	Fri, 15 Dec 95 15:24:55 PST
Used Microscopes ?	Nancy Nelson	Thu, 14 Dec 95 15:56:37 CST
Re: Using ENTEK on Teflon Substrate	<>	Mon, 11 Dec 1995 13:47:33 -0500
Re: Using ENTEK on Teflon Substrate	<>	Mon, 11 Dec 1995 09:12:32 -1000
Re: Using ENTEK on Teflon Substrate	<>	Sat, 9 Dec 1995 23:48:22 -0500
re: Using ENTEK on Teflon Substrate	<>	Fri, 8 Dec 95 09:09:46 PST
Re: Using ENTEK on Teflon Substrate	John Nelson	Fri, 8 Dec 1995 07:35:35 -0500 (EST)
Using ENTEK on Teflon Substrate	Davis, Phil	Thu, 07 Dec 95 15:04:00 CST
Re: UV CURING SYSTEM	<>	Mon, 22 May 1995 20:48:23 -0400
UV CURING SYSTEM	Jim Marsico	Mon, 22 May 95 17:28:01 -0400
Re: UV Curing Systems	Peter Swanson	Wed, 24 May 1995 10:42:04 GMT
Vendors for attaching spheres to BGA packages	Robert Willis	24 Aug 95 02:53:55 EDT
Vendors for attaching spheres to BGA packages	Steve Murphy	Tue, 22 Aug 1995 14:10:44 -0500
Via distances from SMT Pads	Harry Parkinson DTN 264-6760	Fri, 28 Jul 95 09:19:31 EDT
Re: Via in Pad for BGA	Pat McGuine	Fri, 08 Dec 1995 13:01:35 -0600
Via in Pad for BGA	oliver kierse	Fri, 8 Dec 95 09:22:45 GMT
Via size question	Brian E. Jackson	Thu, 26 Oct 95 18:07:10 PDT
Re: Via solder fill	BWOOLDRI	Fri, 06 Oct 95 15:06:08 CST
Via solder fill	Ian Graham	Thu, 5 Oct 1995 18:17:45 +0930 (CST)
via to land clearance	John Laur	Thu, 27 Jul 95 12:55:25 CDT
Via-in pad	R_R_HOLMES	22 Nov 95 11:59:31 -0500
Re: Via-in-Pad for BGA	Greg Bartlett	8 Dec 1995 11:34:37 -0500
Re: Via-in-Pad for BGA	Tom-D Moore	Fri, 8 Dec 95 09:19:34 GMT
Via-in-Pad for BGA	Bill Fabry	7 Dec 1995 11:32:44 -0800
Re: Via-in-smt-pad	R_R_HOLMES	11 Dec 95 16:11:00 -0500
Via-in-smt-pad	Mickey Weiner (2937)	Thu, 7 Dec 1995 17:33:15 +0200 (IST)
Re: Vias in SMT pads	R_R_HOLMES	30 Nov 95 09:09:19 -0500
Fwd: Vias in SMT pads	Sunny Ghajar	29 Nov 1995 19:04:47 GMT
Re: Vias in SMT pads	R_R_HOLMES	31 Jul 95 11:24:17 -0400
vote ON JOB OPENINGS	OMAR	Mon, 7 Aug 95 13:28:31 -0700
Re: Wanted: Vacuum Sealers	jyoung	Tue, 09 May 95 16:36:44 PST
Wanted: Vacuum Sealers	FRANK MARTIN	Tue, 9 May 95 09:34:22 CDT
WANTED:THEDA SERVICE BUREAU	Tom Martin 3408	Fri, 19 May 95 11:29:08 EDT
Re[2]: warping	<>	Thu, 19 Oct 95 19:41:46 EST
Re: warping	<>	Thu, 19 Oct 95 08:42:15 EST
Re: warping	<>	Wed, 18 Oct 1995 02:27:14 -0400
warping	Brian R Oatman	Mon, 16 Oct 1995 20:33:44 -0700
Re: Wave Solder Fixtures and their effects on profiles....	<>	Mon, 19 Jun 95 05:58:32 PST
Wave Solder Fixtures and their effects on profiles....	<>	Thu, 15 Jun 95 11:04:11
Wave Soldering Health Concerns	Crawford, John A.	Tue, 30 May 95 11:15:00 EST
RE: Wave Soldering Machine	Crawford, John A.	Wed, 20 Dec 95 16:23:00 EST
Wave Soldering Machine	<>	Thu, 14 Dec 1995 19:03:02 -0500
Re: Wave Soldering Machine	dmitchel	Thu, 16 Nov 95 15:48:35 PST
Wave Soldering SOIC's without bridging	Harry Parkinson DTN 264-6760	Wed, 26 Jul 95 09:21:52 EDT
Re: Wave Soldering TSOP Devices	John Laur	Wed, 21 Jun 95 14:02:25 CDT
Wave Soldering TSOP Devices	Robert Willis	21 Jun 95 07:38:44 EDT
Re: wave soldering with w.s. flux	<>	Mon, 08 May 95 14:39:32 PST
wave soldering with w.s. flux	Jim Marsico	Wed, 03 May 95 17:19:01 -0400
wavesoldering rigidflex motherboards	<>	Tue, 5 Sep 1995 02:31:58 -0400
Web Site for EMPF	David T. Novick	Mon, 21 Aug 95 11:04:03 PST
RE: Web Site for EMPF (fwd)	Leila Hady	Wed, 6 Sep 1995 14:44:22 -0500 (CDT)
RE: Web Site for EMPF (fwd)	Leila Hady	Wed, 6 Sep 1995 13:45:06 -0500 (CDT)
Wet Processing Nozzles	<>	Sat, 09 Dec 95 14:21:12 EST
Re: What is a buried resistor ?	Robert Blomstrom	Wed, 16 Aug 95 13:46:01 EDT
Re: What is a buried resistor ?	<>	Wed, 16 Aug 95 12:45:00 EST
Re: What is a buried resistor ?	Todd Zorn	Wed, 16 Aug 95 07:00:11 CDT
Re: What is a buried resistor ?	Robert Blomstrom	Tue, 15 Aug 95 18:27:42 EDT
What is a buried resistor ?	Mitra Geeban	Tue, 15 Aug 95 16:13:09 -0400
Re: What or Who is the SMART Group	Peter Swanson	Fri, 29 Dec 1995 10:32:24 GMT
What or Who is the SMART Group	<>	Thu, 28 Dec 95 09:06:16 PST
What's the optimal baking condition for ML board before IR reflow ?	IRVING LEE, COMPONENT ENGINEERING DEPT/MOD,@TAO	Wed, 15 Nov 95 18:30:00 PST
Re[2]: Where did 30m" for Tab plating co	MR NORMAN S EINARSON	Wed, 27 Sep 1995 17:19:26 EDT
Re[2]: Where did 30m" for Tab plating co	MR NORMAN S EINARSON	Wed, 27 Sep 1995 17:18:37 EDT
Re: Where did 30m" for Tab plating come from?	Jerry Cupples	Tue, 26 Sep 1995 14:15:31 -0500
Re[2]: Where did 30m" for Tab plating come from?	Stephen C Joy	Tue, 26 Sep 95 07:52:00 PDT
Re: Where did 30m" for Tab plating come from?	Jerry Cupples	Tue, 26 Sep 1995 09:43:56 -0500
Re: Where did 30m" for Tab plating come from?	Jerry Cupples	Mon, 25 Sep 1995 19:32:58 -0500
Where did 30m" for Tab plating come from?	Steve Joy	Mon, 25 Sep 95 14:09:54 -0700
Re: Re[2]: Where did 30m" for...	Mike Buetow	Fri, 29 Sep 1995 08:58:38 -0500 (CDT)
Re: Re[2]: Where did 30m" for...	<>	Thu, 28 Sep 1995 17:02:55 -0400
Why email	Tom Martin 3408	Wed, 9 Aug 95 18:33:12 EDT
Re: Why Gold finish on Cell phone Boards	Thad McMillan	Thu, 27 Jul 95 16:40:23 CST
RE: Why Gold finish on Cell phone Boards	Vern Harrison	Thu, 27 Jul 95 13:21:36 mdt
Why Gold finish on Cell phone Boards	<>	Thu, 27 Jul 95 10:07:46 EST
Re: why photoplot?	ScicardsR user id	Wed, 1 Nov 95 07:23:49 EST
Re: why photoplot?	Thad McMillan	Tue, 31 Oct 95 08:31:17 CST
Re: why photoplot?	ScicardsR user id	Tue, 31 Oct 95 07:32:17 EST
why photoplot?	Al Slagle	Mon, 30 Oct 95 13:43:29 MST
FW: Windows, Windows and more Windows	Crawford, John A.	Wed, 13 Sep 95 12:59:00 EST
Re[2]: Windows, Windows and more Windows	<>	Fri, 08 Sep 95 08:03:02 PST
Re: Windows, Windows and more Windows	<>	06 Sep 1995 09:53:25 -0400
Re: Windows, Windows and more Windows	<>	Sun, 3 Sep 1995 04:12:39 -0400
Windows, Windows and more Windows	ScicardsR user id	Thu, 31 Aug 95 10:48:32 EDT
Re: Windows, Windows and more Windows (fwd)	Leila Hady	Wed, 6 Sep 1995 14:38:47 -0500 (CDT)
Wire Staking for Repairs & ECO's	brendan mccormack	Fri, 6 Oct 1995 13:10:03 +0100 (WET DST)
Re: Wires Encapsulated in Kapton	<>	Fri, 25 Aug 1995 12:25:28 -0400
Wires Encapsulated in Kapton	<>	Fri, 25 Aug 95 7:21:44 EDT
RE: X Ray Inspection Fine Pitch,BGA, Chip	Crawford, John A.	Fri, 29 Sep 95 14:42:00 EST
Re: X Ray Inspection Fine Pitch,BGA, Chip	Phillip R Barela	29 Sep 1995 08:02:17 -0700
X Ray Inspection Fine Pitch,BGA, Chip	Robert Willis	28 Sep 95 03:48:36 EDT
X-out standards	<>	Tue, 3 Oct 95 09:41:50 PDT
Re: X-Outs at Drill	<>	Tue, 27 Jun 95 17:40:05 MST
X-Outs at Drill	<>	Tue, 27 Jun 95 11:47:28 EST
yellow U/V curable legend ink	Thomas Dammrich	Mon, 26 Jun 1995 10:12:55 -0500 (CDT)
Yields in PC board manufacturing	<>	Thu, 11 May 1995 23:00:40 -0400
YOU MUST BE PULLING MY PADS	Al Slagle	Thu, 19 Oct 95 11:06:00 MDT
zif & lif edge connectors	Michael Alderete	Tue, 01 Aug 95 08:48:30 PST
zif & lif edge connectors	Bill Gaines B160 x2199	Mon, 31 Jul 95 17:23:48 PDT

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

TECHNET Archives

1995

TechNet@IPC.ORG

Subject

From

Date