TECHNET Archives

September 2018

TechNet@IPC.ORG
Options: Hide Table of Contents

<> (8 Messages)
Ahmad, Syed (1 Message)
Bev Christian (1 Message)
Bhanu Sood (1 Message)
Blair Hogg (1 Message)
Bob Landman (7 Messages)
Bob Wettermann (1 Message)
Bogert, Gerald L (Contractor) (1 Message)
Brandy Tharp (1 Message)
Carroll (US), Thomas A (1 Message)
Chris Thierolf (2 Messages)
David Hillman (20 Messages)
Decker, Scott UTAS (5 Messages)
Dennis Fritz (3 Messages)
Denny (1 Message)
Douglas Pauls (13 Messages)
Drew meyer (4 Messages)
Dwight Mattix (1 Message)
Eray CANLI (2 Messages)
Fox, Ian (1 Message)
George Wenger (3 Messages)
Gerry Gagnon (1 Message)
Graham Collins (5 Messages)
Gumpert, Ben (2 Messages)
Guy Ramsey (7 Messages)
HEAD James (2 Messages)
Jack Olson (5 Messages)
John Burke (1 Message)
Joyce Koo (1 Message)
Juan T. Marugan (1 Message)
Larry Dzaugis (3 Messages)
lduso - Diamond-MT.com (5 Messages)
Leland Woodall (2 Messages)
Mike Kirschner (1 Message)
Mumtaz Bora (1 Message)
Nigel Burtt (3 Messages)
Ong Seet Leng (2 Messages)
Ramon Essers (1 Message)
Richard Kraszewski (1 Message)
Robert Kondner (8 Messages)
Ron Feyereisen (4 Messages)
Russell Kido (3 Messages)
SALA GABRIELE (3 Messages)
Stadem, Richard D (34 Messages)
Steve Gregory (6 Messages)
Steve Smith (1 Message)
Tom Brendlinger (1 Message)
Tony Lentz (1 Message)
Wayne Showers (26 Messages)
Wayne Thayer (2 Messages)
Yuan-chia Joyce Koo (17 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender <>
Bees Wax or Super Glue Liquid Adhesive, Cross section mounting
<>
Fri, 7 Sep 2018 17:29:43 +0000
Electroplated Hard gold hardness
<>
Fri, 14 Sep 2018 14:16:30 +0000
Re: Electroplated Hard gold hardness
<>
Thu, 20 Sep 2018 17:15:47 +0000
Press Fit Pins Insertion Depth
<>
Thu, 6 Sep 2018 12:47:11 +0000
Vendor Reel Parts Marking
<>
Tue, 11 Sep 2018 16:54:52 +0000
Re: Vendor Reel Parts Marking
<>
Tue, 11 Sep 2018 19:16:56 +0000
Re: Vendor Reel Parts Marking
<>
Wed, 12 Sep 2018 10:52:50 +0000
Re: [External] Re: [TN] Element Quiz Answer
<>
Tue, 4 Sep 2018 15:09:30 +0000
New Sender Ahmad, Syed
source for bare FR5
Ahmad, Syed
Tue, 25 Sep 2018 14:39:55 +0000
New Sender Bev Christian
Re: PCBs in dry chambers
Bev Christian
Tue, 11 Sep 2018 20:40:57 -0400
New Sender Bhanu Sood
Re: High Temp SnPb solder
Bhanu Sood
Thu, 27 Sep 2018 10:50:16 -0400
New Sender Blair Hogg
Prop 65 and RoHS compliance
Blair Hogg
Mon, 24 Sep 2018 10:42:29 -0500
New Sender Bob Landman
Re: High Temp SnPb solder
Bob Landman
Thu, 20 Sep 2018 11:29:41 -0400
Re: Prop 65 and RoHS compliance
Bob Landman
Thu, 27 Sep 2018 11:44:50 -0400
Re: Prop 65 and RoHS compliance
Bob Landman
Thu, 27 Sep 2018 15:27:09 -0400
Re: Prop 65 and RoHS compliance
Bob Landman
Thu, 27 Sep 2018 15:50:26 -0400
Re: Prop 65 and RoHS compliance
Bob Landman
Thu, 27 Sep 2018 16:12:51 -0400
Re: R: [TN] Ni intermetallic thickness target
Bob Landman
Wed, 5 Sep 2018 18:00:21 -0400
Re: Which is better? Star Wars or Star Trek?
Bob Landman
Sat, 1 Sep 2018 15:05:19 -0400
New Sender Bob Wettermann
Re: Humiseal Stripper 1063
Bob Wettermann
Fri, 14 Sep 2018 11:04:18 -0500
New Sender Bogert, Gerald L (Contractor)
Re: Humiseal Stripper 1063
Bogert, Gerald L (Contractor)
Fri, 14 Sep 2018 13:27:10 +0000
New Sender Brandy Tharp
Re: Prop 65 and RoHS compliance
Brandy Tharp
Mon, 24 Sep 2018 18:43:59 +0000
New Sender Carroll (US), Thomas A
Re: Which is better? Star Wars or Star Trek?
Carroll (US), Thomas A
Sat, 1 Sep 2018 19:11:38 +0000
New Sender Chris Thierolf
Humiseal Stripper 1063
Chris Thierolf
Thu, 13 Sep 2018 23:57:07 +0000
Re: Humiseal Stripper 1063
Chris Thierolf
Fri, 14 Sep 2018 14:18:34 +0000
New Sender David Hillman
Element Quiz Answer
David Hillman
Fri, 7 Sep 2018 14:44:52 -0500
Re: Element Quiz Answer
David Hillman
Fri, 7 Sep 2018 17:56:56 -0500
Element Quiz Answer
David Hillman
Fri, 14 Sep 2018 12:35:37 -0500
Element Quiz Answer
David Hillman
Fri, 21 Sep 2018 13:41:40 -0500
Element Quiz Question
David Hillman
Fri, 7 Sep 2018 06:52:36 -0500
Element Quiz Question
David Hillman
Thu, 13 Sep 2018 17:50:11 -0500
Element Quiz Question
David Hillman
Thu, 20 Sep 2018 22:01:51 -0500
Element Quiz Question
David Hillman
Fri, 28 Sep 2018 06:35:45 -0500
Re: High Temp SnPb solder
David Hillman
Thu, 20 Sep 2018 06:57:28 -0500
Re: High Temp SnPb solder
David Hillman
Thu, 20 Sep 2018 09:16:57 -0500
Re: High Temp SnPb solder
David Hillman
Thu, 27 Sep 2018 12:04:05 -0500
Re: Ni intermetallic thickness target
David Hillman
Wed, 5 Sep 2018 16:12:37 -0500
Re: PCBs in dry chambers
David Hillman
Wed, 12 Sep 2018 07:50:21 -0500
Re: PCBs in dry chambers
David Hillman
Wed, 12 Sep 2018 09:55:49 -0500
Re: R: [TN] Ni intermetallic thickness target
David Hillman
Thu, 6 Sep 2018 07:26:36 -0500
Re: R: [TN] Ni intermetallic thickness target
David Hillman
Thu, 6 Sep 2018 08:50:53 -0500
Re: R: [TN] Ni intermetallic thickness target
David Hillman
Thu, 6 Sep 2018 10:50:15 -0500
Re: R: [TN] Ni intermetallic thickness target
David Hillman
Thu, 6 Sep 2018 16:21:14 -0500
Re: Vendor Reel Parts Marking
David Hillman
Tue, 11 Sep 2018 13:06:00 -0500
Re: [External] [TN] Element Quiz Question
David Hillman
Fri, 21 Sep 2018 10:39:28 -0500
New Sender Decker, Scott UTAS
Re: [External] Re: [TN] Element Quiz Answer
Decker, Scott UTAS
Tue, 4 Sep 2018 14:19:00 +0000
Re: [External] Re: [TN] Element Quiz Answer
Decker, Scott UTAS
Tue, 4 Sep 2018 15:06:59 +0000
Re: [External] Re: [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 7 Sep 2018 14:48:21 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 21 Sep 2018 14:08:04 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 21 Sep 2018 15:02:04 +0000
New Sender Dennis Fritz
Re: Element Quiz Answer
Dennis Fritz
Fri, 21 Sep 2018 16:07:06 -0400
Re: Element Quiz Question
Dennis Fritz
Thu, 13 Sep 2018 19:07:44 -0400
Re: Prop 65 and RoHS compliance
Dennis Fritz
Thu, 27 Sep 2018 14:30:00 -0400
New Sender Denny
Re: Element Quiz Question
Denny
Thu, 20 Sep 2018 23:22:14 -0400
New Sender Douglas Pauls
Re: Element Quiz Answer
Douglas Pauls
Fri, 7 Sep 2018 15:14:28 -0500
Re: Element Quiz Answer
Douglas Pauls
Fri, 14 Sep 2018 12:41:46 -0500
Re: Element Quiz Question
Douglas Pauls
Fri, 7 Sep 2018 07:35:47 -0500
Re: Humiseal Stripper 1063
Douglas Pauls
Thu, 13 Sep 2018 19:42:11 -0500
Re: Humiseal Stripper 1063
Douglas Pauls
Fri, 14 Sep 2018 09:24:03 -0500
Re: Humiseal Stripper 1063
Douglas Pauls
Fri, 14 Sep 2018 10:43:30 -0500
IPC-B-52B
Douglas Pauls
Wed, 26 Sep 2018 15:54:17 -0500
Re: OUT OF EMAIL FORUM
Douglas Pauls
Fri, 14 Sep 2018 06:53:58 -0500
Re: PCBs in dry chambers
Douglas Pauls
Wed, 12 Sep 2018 15:17:16 -0500
Re: [External] Re: [TN] Element Quiz Answer
Douglas Pauls
Tue, 4 Sep 2018 07:13:25 -0500
Re: [External] Re: [TN] Element Quiz Answer
Douglas Pauls
Tue, 4 Sep 2018 09:38:47 -0500
Re: [External] Re: [TN] Element Quiz Answer
Douglas Pauls
Tue, 4 Sep 2018 10:16:01 -0500
Re: [External] Re: [TN] Element Quiz Question
Douglas Pauls
Fri, 7 Sep 2018 10:32:05 -0500
New Sender Drew meyer
Re: Element Quiz Question
Drew meyer
Fri, 28 Sep 2018 06:57:36 -0500
Re: Element Quiz Question
Drew meyer
Fri, 28 Sep 2018 07:18:52 -0500
Re: [External] Re: [TN] Element Quiz Answer
Drew meyer
Tue, 4 Sep 2018 14:44:04 +0000
Re: [External] Re: [TN] Element Quiz Answer
Drew meyer
Tue, 4 Sep 2018 14:45:23 +0000
New Sender Dwight Mattix
Re: [EXTERNAL] Re: [TN] PTH Fine-Pitch Definition
Dwight Mattix
Thu, 6 Sep 2018 17:38:45 +0000
New Sender Eray CANLI
Re: Element Quiz Question
Eray CANLI
Fri, 7 Sep 2018 14:58:39 +0300
Re: Element Quiz Question
Eray CANLI
Fri, 28 Sep 2018 14:43:08 +0300
New Sender Fox, Ian
Re: Element Quiz Question
Fox, Ian
Fri, 7 Sep 2018 11:59:14 +0000
New Sender George Wenger
Re: R: [TN] Ni intermetallic thickness target
George Wenger
Thu, 6 Sep 2018 10:21:01 -0400
Re: R: [TN] Ni intermetallic thickness target
George Wenger
Thu, 6 Sep 2018 13:44:12 -0400
Re: R: [TN] Ni intermetallic thickness target
George Wenger
Thu, 6 Sep 2018 13:56:42 -0400
New Sender Gerry Gagnon
Re: Element Quiz Question
Gerry Gagnon
Thu, 13 Sep 2018 22:55:57 +0000
New Sender Graham Collins
Re: Humiseal Stripper 1063
Graham Collins
Fri, 14 Sep 2018 11:35:23 -0300
Re: Prop 65 and RoHS compliance
Graham Collins
Thu, 27 Sep 2018 16:32:01 -0300
Re: PWB Repair
Graham Collins
Wed, 5 Sep 2018 08:00:32 -0300
Re: qualifying a heatsink attach process
Graham Collins
Tue, 4 Sep 2018 09:59:44 -0300
Re: [External] Re: [TN] Element Quiz Answer
Graham Collins
Tue, 4 Sep 2018 08:56:52 -0300
New Sender Gumpert, Ben
High Temp SnPb solder
Gumpert, Ben
Thu, 20 Sep 2018 11:40:26 +0000
PWB Repair
Gumpert, Ben
Wed, 5 Sep 2018 10:22:49 +0000
New Sender Guy Ramsey
Ni intermetallic thickness target
Guy Ramsey
Wed, 5 Sep 2018 12:58:32 -0400
Re: Ni intermetallic thickness target
Guy Ramsey
Wed, 5 Sep 2018 13:34:25 -0400
Re: PTH Fine-Pitch Definition
Guy Ramsey
Thu, 6 Sep 2018 10:35:11 -0400
Re: R: [TN] Ni intermetallic thickness target
Guy Ramsey
Thu, 6 Sep 2018 08:10:16 -0400
Re: R: [TN] Ni intermetallic thickness target
Guy Ramsey
Thu, 6 Sep 2018 10:15:58 -0400
Re: R: [TN] Ni intermetallic thickness target
Guy Ramsey
Thu, 6 Sep 2018 10:32:26 -0400
Re: R: [TN] Ni intermetallic thickness target
Guy Ramsey
Thu, 6 Sep 2018 17:17:23 -0400
New Sender HEAD James
Re: -|EXT|- [TN] Element Quiz Question
HEAD James
Fri, 14 Sep 2018 05:57:50 +0000
Re: -|EXT|- [TN] Element Quiz Question
HEAD James
Fri, 21 Sep 2018 07:18:59 +0000
New Sender Jack Olson
Re: High Temp SnPb solder
Jack Olson
Thu, 27 Sep 2018 09:40:51 -0500
Re: High Temp SnPb solder
Jack Olson
Thu, 27 Sep 2018 09:47:45 -0500
Re: High Temp SnPb solder
Jack Olson
Thu, 27 Sep 2018 12:06:29 -0500
Re: Mounting hole question.
Jack Olson
Fri, 14 Sep 2018 12:04:33 -0500
Re: Prop 65 and RoHS compliance
Jack Olson
Thu, 27 Sep 2018 09:51:25 -0500
New Sender John Burke
Re: Prop 65 and RoHS compliance
John Burke
Thu, 27 Sep 2018 20:00:52 +0000
New Sender Joyce Koo
Re: qualifying a heatsink attach process
Joyce Koo
Tue, 4 Sep 2018 08:54:19 -0400
New Sender Juan T. Marugan
SPI machines. Suggestions.
Juan T. Marugan
Tue, 11 Sep 2018 15:44:20 -0500
New Sender Larry Dzaugis
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Larry Dzaugis
Thu, 20 Sep 2018 11:29:00 -0400
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Larry Dzaugis
Thu, 20 Sep 2018 13:59:53 -0400
Re: Element Quiz Question
Larry Dzaugis
Thu, 20 Sep 2018 23:07:54 -0400
New Sender lduso - Diamond-MT.com
Re: Humiseal Stripper 1063
lduso - Diamond-MT.com
Thu, 13 Sep 2018 21:05:10 -0400
Re: Humiseal Stripper 1063
lduso - Diamond-MT.com
Fri, 14 Sep 2018 10:31:27 -0400
Re: Humiseal Stripper 1063
lduso - Diamond-MT.com
Fri, 14 Sep 2018 11:42:32 -0400
Re: Humiseal Stripper 1063
lduso - Diamond-MT.com
Fri, 14 Sep 2018 11:46:58 -0400
Re: [External] Re: [TN] Element Quiz Answer
lduso - Diamond-MT.com
Tue, 4 Sep 2018 10:41:57 -0400
New Sender Leland Woodall
Re: Element Quiz Question
Leland Woodall
Fri, 7 Sep 2018 12:00:27 +0000
Re: Element Quiz Question
Leland Woodall
Fri, 28 Sep 2018 11:57:37 +0000
New Sender Mike Kirschner
Re: Prop 65 and RoHS compliance
Mike Kirschner
Sun, 30 Sep 2018 15:30:37 -0500
New Sender Mumtaz Bora
Re: PCBs in dry chambers
Mumtaz Bora
Tue, 11 Sep 2018 23:20:12 +0000
New Sender Nigel Burtt
Re: Prop 65 and RoHS compliance
Nigel Burtt
Thu, 27 Sep 2018 03:18:59 -0500
Re: Prop 65 and RoHS compliance
Nigel Burtt
Thu, 27 Sep 2018 10:24:43 -0500
Re: Prop 65 and RoHS compliance
Nigel Burtt
Fri, 28 Sep 2018 06:26:06 -0500
New Sender Ong Seet Leng
OUT OF EMAIL FORUM
Ong Seet Leng
Fri, 14 Sep 2018 08:05:58 +0000
quit e-mail forum (
Ong Seet Leng
Tue, 11 Sep 2018 02:01:47 +0000
New Sender Ramon Essers
Re: IPC-B-52B
Ramon Essers
Wed, 26 Sep 2018 23:06:46 +0200
New Sender Richard Kraszewski
And now for Something completely different,....Packaging of Polymer Materials in Dry Ice During Shipment
Richard Kraszewski
Thu, 20 Sep 2018 21:54:50 +0000
New Sender Robert Kondner
PCBs in dry chambers
Robert Kondner
Tue, 11 Sep 2018 16:14:27 -0400
Re: PCBs in dry chambers
Robert Kondner
Tue, 11 Sep 2018 19:11:30 -0400
Re: PCBs in dry chambers
Robert Kondner
Tue, 11 Sep 2018 19:46:24 -0400
Re: Prop 65 and RoHS compliance
Robert Kondner
Mon, 24 Sep 2018 12:07:33 -0400
Re: PTH Fine-Pitch Definition
Robert Kondner
Thu, 6 Sep 2018 15:08:28 -0400
Re: Solder paste jet printers - Experience?
Robert Kondner
Thu, 13 Sep 2018 14:36:24 -0400
Re: Vendor Reel Parts Marking
Robert Kondner
Tue, 11 Sep 2018 14:15:06 -0400
Re: Vendor Reel Parts Marking
Robert Kondner
Tue, 11 Sep 2018 14:46:04 -0400
New Sender Ron Feyereisen
PTH Fine-Pitch Definition
Ron Feyereisen
Thu, 6 Sep 2018 14:29:28 +0000
Re: PTH Fine-Pitch Definition
Ron Feyereisen
Thu, 6 Sep 2018 18:37:01 +0000
Re: PTH Fine-Pitch Definition
Ron Feyereisen
Thu, 6 Sep 2018 19:54:49 +0000
Re: Which is better? Star Wars or Star Trek?
Ron Feyereisen
Tue, 4 Sep 2018 12:35:10 +0000
New Sender Russell Kido
Re: Element Quiz Answer
Russell Kido
Fri, 14 Sep 2018 19:10:20 +0000
Re: Element Quiz Question
Russell Kido
Thu, 13 Sep 2018 23:18:10 +0000
Re: IPC-B-52B
Russell Kido
Wed, 26 Sep 2018 22:15:56 +0000
New Sender SALA GABRIELE
R: [TN] Ni intermetallic thickness target
SALA GABRIELE
Wed, 5 Sep 2018 20:39:28 +0200
R: [TN] Prop 65 and RoHS compliance
SALA GABRIELE
Mon, 24 Sep 2018 18:38:45 +0200
R: [TN] Vendor Reel Parts Marking
SALA GABRIELE
Tue, 11 Sep 2018 22:07:13 +0200
New Sender Stadem, Richard D
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Stadem, Richard D
Thu, 20 Sep 2018 15:26:15 +0000
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Stadem, Richard D
Thu, 20 Sep 2018 16:57:42 +0000
Re: Element Quiz Answer
Stadem, Richard D
Tue, 4 Sep 2018 11:48:24 +0000
Re: Element Quiz Question
Stadem, Richard D
Mon, 10 Sep 2018 12:19:57 +0000
Re: Element Quiz Question
Stadem, Richard D
Mon, 10 Sep 2018 12:21:17 +0000
Re: Element Quiz Question
Stadem, Richard D
Fri, 21 Sep 2018 15:30:05 +0000
Re: High Temp SnPb solder
Stadem, Richard D
Thu, 20 Sep 2018 13:54:27 +0000
Re: High Temp SnPb solder
Stadem, Richard D
Thu, 20 Sep 2018 15:38:24 +0000
Re: High Temp SnPb solder
Stadem, Richard D
Thu, 20 Sep 2018 17:00:17 +0000
Re: High Temp SnPb solder
Stadem, Richard D
Thu, 20 Sep 2018 19:10:29 +0000
Re: Ni intermetallic thickness target
Stadem, Richard D
Wed, 5 Sep 2018 17:17:44 +0000
Re: PCBs in dry chambers
Stadem, Richard D
Wed, 12 Sep 2018 12:24:58 +0000
Re: PCBs in dry chambers
Stadem, Richard D
Wed, 12 Sep 2018 15:07:47 +0000
Re: PCBs in dry chambers
Stadem, Richard D
Wed, 12 Sep 2018 19:58:19 +0000
Re: Prop 65 and RoHS compliance
Stadem, Richard D
Mon, 24 Sep 2018 17:11:38 +0000
Re: Prop 65 and RoHS compliance
Stadem, Richard D
Mon, 24 Sep 2018 18:25:17 +0000
Re: PTH Fine-Pitch Definition
Stadem, Richard D
Thu, 6 Sep 2018 15:13:36 +0000
Re: PTH Fine-Pitch Definition
Stadem, Richard D
Thu, 6 Sep 2018 17:42:49 +0000
Re: PTH Fine-Pitch Definition
Stadem, Richard D
Thu, 6 Sep 2018 19:02:09 +0000
Re: PTH Fine-Pitch Definition
Stadem, Richard D
Thu, 6 Sep 2018 20:04:48 +0000
Re: PTH Fine-Pitch Definition
Stadem, Richard D
Wed, 12 Sep 2018 12:38:10 +0000
Re: qualifying a heatsink attach process
Stadem, Richard D
Tue, 4 Sep 2018 12:43:55 +0000
Re: qualifying a heatsink attach process
Stadem, Richard D
Tue, 4 Sep 2018 13:22:11 +0000
Re: R: [TN] Ni intermetallic thickness target
Stadem, Richard D
Wed, 5 Sep 2018 19:26:29 +0000
Re: R: [TN] Ni intermetallic thickness target
Stadem, Richard D
Thu, 6 Sep 2018 13:34:23 +0000
Re: R: [TN] Ni intermetallic thickness target
Stadem, Richard D
Thu, 6 Sep 2018 13:56:26 +0000
Re: R: [TN] Ni intermetallic thickness target
Stadem, Richard D
Thu, 6 Sep 2018 14:50:10 +0000
Re: R: [TN] Ni intermetallic thickness target
Stadem, Richard D
Thu, 6 Sep 2018 17:32:58 +0000
Re: Vendor Reel Parts Marking
Stadem, Richard D
Tue, 11 Sep 2018 17:27:14 +0000
Re: Vendor Reel Parts Marking
Stadem, Richard D
Tue, 11 Sep 2018 19:00:48 +0000
Re: Vendor Reel Parts Marking
Stadem, Richard D
Tue, 11 Sep 2018 19:44:56 +0000
Re: Vendor Reel Parts Marking
Stadem, Richard D
Tue, 11 Sep 2018 20:00:06 +0000
Re: [External] Re: [TN] Element Quiz Answer
Stadem, Richard D
Tue, 4 Sep 2018 11:39:32 +0000
Re: [External] Re: [TN] Element Quiz Answer
Stadem, Richard D
Tue, 4 Sep 2018 14:46:59 +0000
New Sender Steve Gregory
6-axis MEMS Gyroscope/Accelerometer assembly
Steve Gregory
Thu, 20 Sep 2018 08:17:42 -0600
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Steve Gregory
Thu, 20 Sep 2018 11:03:01 -0600
Re: Element Quiz Question
Steve Gregory
Thu, 13 Sep 2018 16:52:04 -0600
Re: High Temp SnPb solder
Steve Gregory
Thu, 20 Sep 2018 11:20:35 -0600
Re: Humiseal Stripper 1063
Steve Gregory
Fri, 14 Sep 2018 08:45:31 -0600
Re: Humiseal Stripper 1063
Steve Gregory
Fri, 14 Sep 2018 10:01:04 -0600
New Sender Steve Smith
Re: Prop 65 and RoHS compliance
Steve Smith
Mon, 24 Sep 2018 18:21:42 +0000
New Sender Tom Brendlinger
Re: Prop 65 and RoHS compliance
Tom Brendlinger
Mon, 24 Sep 2018 15:56:01 -0400
New Sender Tony Lentz
Re: R: [TN] Ni intermetallic thickness target
Tony Lentz
Thu, 6 Sep 2018 17:47:33 +0000
New Sender Wayne Showers
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Wayne Showers
Thu, 20 Sep 2018 11:29:21 -0500
Re: Bees Wax or Super Glue Liquid Adhesive, Cross section mounting
Wayne Showers
Mon, 10 Sep 2018 09:00:48 -0500
Re: Depaneling Router Machines - recommendation
Wayne Showers
Wed, 5 Sep 2018 13:40:38 -0500
Re: Electroplated Hard gold hardness
Wayne Showers
Thu, 20 Sep 2018 11:34:46 -0500
Re: Element Quiz Answer
Wayne Showers
Fri, 7 Sep 2018 17:44:23 -0500
Re: Element Quiz Answer
Wayne Showers
Fri, 7 Sep 2018 18:12:49 -0500
Re: Element Quiz Question
Wayne Showers
Fri, 14 Sep 2018 09:31:24 -0500
Favorite PCB Finishes - Good & Bad Aspects of finishes
Wayne Showers
Mon, 10 Sep 2018 09:22:16 -0500
Re: High Temp SnPb solder
Wayne Showers
Thu, 20 Sep 2018 13:19:11 -0500
Re: Humiseal Stripper 1063
Wayne Showers
Fri, 14 Sep 2018 11:06:19 -0500
Re: Mounting hole question.
Wayne Showers
Wed, 12 Sep 2018 14:11:33 -0500
Re: Mounting hole question.
Wayne Showers
Fri, 14 Sep 2018 13:09:54 -0500
Re: PCBs in dry chambers
Wayne Showers
Tue, 11 Sep 2018 16:35:35 -0500
Re: PCBs in dry chambers
Wayne Showers
Tue, 11 Sep 2018 17:29:53 -0500
Re: PCBs in dry chambers
Wayne Showers
Tue, 11 Sep 2018 18:17:30 -0500
Re: PCBs in dry chambers
Wayne Showers
Wed, 12 Sep 2018 09:44:25 -0500
Re: PCBs in dry chambers
Wayne Showers
Wed, 12 Sep 2018 14:42:40 -0500
Re: Press Fit Pins Insertion Depth
Wayne Showers
Thu, 6 Sep 2018 08:44:48 -0500
Re: PTH Fine-Pitch Definition
Wayne Showers
Thu, 6 Sep 2018 11:33:41 -0500
Re: PTH Fine-Pitch Definition
Wayne Showers
Tue, 11 Sep 2018 15:04:00 -0500
Re: quit e-mail forum (
Wayne Showers
Tue, 11 Sep 2018 10:00:46 -0500
Re: R: [TN] Ni intermetallic thickness target
Wayne Showers
Thu, 6 Sep 2018 08:37:49 -0500
Solder paste jet printers - Experience?
Wayne Showers
Thu, 13 Sep 2018 13:06:58 -0500
Re: SPI machines. Suggestions.
Wayne Showers
Tue, 11 Sep 2018 16:19:41 -0500
Re: Vendor Reel Parts Marking
Wayne Showers
Tue, 11 Sep 2018 14:41:28 -0500
Re: [External] Re: [TN] Element Quiz Question
Wayne Showers
Fri, 7 Sep 2018 10:12:05 -0500
New Sender Wayne Thayer
Re: Mounting hole question.
Wayne Thayer
Wed, 12 Sep 2018 08:41:40 -0700
Re: Mounting hole question.
Wayne Thayer
Wed, 12 Sep 2018 14:21:49 -0700
New Sender Yuan-chia Joyce Koo
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 13:22:44 -0400
Re: 6-axis MEMS Gyroscope/Accelerometer assembly
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 14:18:35 -0400
Re: And now for Something completely different,....Packaging of Polymer Materials in Dry Ice During Shipment
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 20:01:09 -0400
Re: Element Quiz Question
Yuan-chia Joyce Koo
Fri, 7 Sep 2018 09:03:36 -0400
Re: Favorite PCB Finishes - Good & Bad Aspects of finishes
Yuan-chia Joyce Koo
Mon, 10 Sep 2018 12:18:51 -0400
Re: High Temp SnPb solder
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 09:39:27 -0400
Re: High Temp SnPb solder
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 10:07:18 -0400
Re: High Temp SnPb solder
Yuan-chia Joyce Koo
Thu, 20 Sep 2018 12:44:51 -0400
Re: High Temp SnPb solder
Yuan-chia Joyce Koo
Thu, 27 Sep 2018 14:00:36 -0400
Re: High Temp SnPb solder
Yuan-chia Joyce Koo
Thu, 27 Sep 2018 14:09:57 -0400
Re: Ni intermetallic thickness target
Yuan-chia Joyce Koo
Wed, 5 Sep 2018 15:01:59 -0400
Re: PCBs in dry chambers
Yuan-chia Joyce Koo
Tue, 11 Sep 2018 20:02:34 -0400
Re: Prop 65 and RoHS compliance
Yuan-chia Joyce Koo
Mon, 24 Sep 2018 12:40:57 -0400
Re: R: [TN] Ni intermetallic thickness target
Yuan-chia Joyce Koo
Thu, 6 Sep 2018 12:41:58 -0400
Re: R: [TN] Ni intermetallic thickness target
Yuan-chia Joyce Koo
Thu, 6 Sep 2018 12:47:17 -0400
Re: R: [TN] Ni intermetallic thickness target
Yuan-chia Joyce Koo
Thu, 6 Sep 2018 17:13:47 -0400
Re: Which is better? Star Wars or Star Trek?
Yuan-chia Joyce Koo
Sat, 1 Sep 2018 15:22:26 -0400

ATOM RSS1 RSS2