TECHNET Archives

March 2017

TechNet@IPC.ORG
Options: Hide Table of Contents

<> (12 Messages)
Ahne Oosterhof (3 Messages)
Bev Christian (3 Messages)
Bhanu Sood (4 Messages)
Brian Chandler (1 Message)
Brian Ellis (2 Messages)
Carl Van Wormer (3 Messages)
Carroll, Thomas A (2 Messages)
Chuck Brummer (2 Messages)
Craig Sullivan (1 Message)
Dave Elder (1 Message)
David Hillman (11 Messages)
David Lindblom (3 Messages)
Decker, Scott UTAS (4 Messages)
Dennis Saputelli (1 Message)
Douglas Pauls (7 Messages)
Drew meyer (2 Messages)
Ed Popielarski (4 Messages)
George Wenger (1 Message)
Giamis, Andy (3 Messages)
Graham Collins (1 Message)
GRIVON Arnaud (2 Messages)
Grossmann, Günter (2 Messages)
Gumpert, Ben (2 Messages)
Ioan Tempea (1 Message)
Iulia Muntele (5 Messages)
James Head (2 Messages)
John Maxwell (3 Messages)
Jose A Rios (7 Messages)
Joyce Koo (23 Messages)
Julie Silk (2 Messages)
Ken Barton (1 Message)
Ken Harp (1 Message)
Larry Dzaugis (2 Messages)
Lars Tegelberg (1 Message)
lduso - Diamond-MT.com (2 Messages)
Lee Hitchens (1 Message)
Leland Woodall (4 Messages)
Lum Wee Mei (1 Message)
Lyon Yuan (2 Messages)
Massoud Shakeri (1 Message)
Matthias Mansfeld (1 Message)
May, William D (Dean) CIV NSWC Crane, JXMP (2 Messages)
Mordechai Kirshenbaum (1 Message)
Nutting, Phil (6 Messages)
pietro (1 Message)
Ramon Essers | ETECH-trainingen (2 Messages)
Richard Krug (1 Message)
Robert Kondner (9 Messages)
Roger Mack (1 Message)
Ron Feyereisen (1 Message)
Stadem, Richard D. (16 Messages)
Steve Gregory (2 Messages)
Steven Creswick (1 Message)
Theodore J. Tontis (5 Messages)
Tom Brendlinger (2 Messages)
Torsten Hagge (2 Messages)
Vladimir (1 Message)
Wayne Thayer (10 Messages)
Yuan-chia Joyce Koo (1 Message)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender <>
Active Panel Plant Gurus, indexing pins
<>
Tue, 7 Mar 2017 13:57:59 +0000
FW: Any Traffic Out There, awful quiet
<>
Mon, 6 Mar 2017 18:26:24 +0000
BGA periphery keep out zone
<>
Tue, 7 Mar 2017 20:04:00 +0000
Differential Scanning Calorimetry
<>
Thu, 9 Mar 2017 12:45:37 +0000
IPC-TM-650, 2.4.22, Bow & Twist
<>
Tue, 28 Mar 2017 19:05:16 +0000
Preconditioning Bake PWB coupons before Thermal Stress
<>
Tue, 14 Mar 2017 11:18:32 +0000
PWB Coupons Indexing Pins, Non Precision
<>
Mon, 6 Mar 2017 16:19:11 +0000
PWB Drying/Baking Standard
<>
Mon, 13 Mar 2017 19:09:54 +0000
PWB Laminate Swelling
<>
Wed, 8 Mar 2017 16:21:34 +0000
Re: PWB Laminate Swelling
<>
Wed, 8 Mar 2017 16:48:52 +0000
Round, Non Critical Tolerance, PWB Index pins
<>
Mon, 6 Mar 2017 20:13:50 +0000
Re: Round, Non Critical Tolerance, PWB Index pins
<>
Mon, 6 Mar 2017 20:52:37 +0000
New Sender Ahne Oosterhof
Re: Cyberoptics LSM2
Ahne Oosterhof
Tue, 14 Mar 2017 17:27:02 -0700
Re: Screen On Insulation - E-field break-down
Ahne Oosterhof
Tue, 21 Mar 2017 09:04:43 -0700
Re: WG: [TN] Screen On Insulation
Ahne Oosterhof
Tue, 21 Mar 2017 08:15:52 -0700
New Sender Bev Christian
Re: AW: [TN] IPC-TM-650, 2.4.22, Bow & Twist
Bev Christian
Wed, 29 Mar 2017 06:38:54 -0400
Re: Cyberoptics LSM2
Bev Christian
Tue, 14 Mar 2017 17:08:16 -0400
Re: Differential Scanning Calorimetry
Bev Christian
Thu, 9 Mar 2017 09:40:23 -0500
New Sender Bhanu Sood
Re: Differential Scanning Calorimetry
Bhanu Sood
Thu, 9 Mar 2017 13:44:41 -0500
Re: Element Quiz Answer
Bhanu Sood
Thu, 9 Mar 2017 14:05:14 -0500
Re: Element Quiz Question
Bhanu Sood
Fri, 3 Mar 2017 08:51:38 -0500
Re: Element Quiz Question
Bhanu Sood
Fri, 24 Mar 2017 08:29:50 -0400
New Sender Brian Chandler
Re: Reduced size PCB pads for 0402 capacitors on back side of BGA
Brian Chandler
Fri, 3 Mar 2017 07:29:03 -0600
New Sender Brian Ellis
Re: Element Quiz Question
Brian Ellis
Fri, 3 Mar 2017 15:57:20 +0200
Re: Element Quiz Question
Brian Ellis
Fri, 31 Mar 2017 16:56:42 +0300
New Sender Carl Van Wormer
Reduced size PCB pads for 0402 capacitors on back side of BGA
Carl Van Wormer
Wed, 1 Mar 2017 21:22:30 +0000
Re: WG: [TN] Screen On Insulation
Carl Van Wormer
Tue, 21 Mar 2017 13:46:04 +0000
Re: WG: [TN] Screen On Insulation
Carl Van Wormer
Tue, 21 Mar 2017 17:00:46 +0000
New Sender Carroll, Thomas A
Re: Element Quiz Question
Carroll, Thomas A
Fri, 3 Mar 2017 13:59:33 +0000
Re: Element Quiz Question
Carroll, Thomas A
Fri, 24 Mar 2017 12:31:45 +0000
New Sender Chuck Brummer
Re: humidity control
Chuck Brummer
Wed, 8 Mar 2017 16:52:43 +0000
Re: humidity control
Chuck Brummer
Wed, 8 Mar 2017 19:02:23 +0000
New Sender Craig Sullivan
Re: Baking before conformal coating
Craig Sullivan
Wed, 1 Mar 2017 14:35:25 -0500
New Sender Dave Elder
Re: Element Quiz Question
Dave Elder
Fri, 10 Mar 2017 14:33:43 +1300
New Sender David Hillman
Element Quiz Answer
David Hillman
Fri, 3 Mar 2017 13:17:52 -0600
Element Quiz Answer
David Hillman
Fri, 10 Mar 2017 13:29:13 -0600
Element Quiz Answer
David Hillman
Fri, 24 Mar 2017 12:55:01 -0500
Element Quiz Answer
David Hillman
Fri, 31 Mar 2017 13:10:56 -0500
Re: Element Quiz Answer
David Hillman
Fri, 31 Mar 2017 13:36:16 -0500
Element Quiz Question
David Hillman
Fri, 3 Mar 2017 07:49:24 -0600
Element Quiz Question
David Hillman
Thu, 9 Mar 2017 19:27:03 -0600
Element Quiz Question
David Hillman
Fri, 24 Mar 2017 06:57:55 -0500
Element Quiz Question
David Hillman
Fri, 31 Mar 2017 08:43:56 -0500
Re: grunge at bottom of tinning solder pot
David Hillman
Tue, 7 Mar 2017 12:50:14 -0600
Re: [COM] Tin-Lead Assembly of SAC305 PTH Connectors
David Hillman
Thu, 23 Mar 2017 07:15:45 -0500
New Sender David Lindblom
Re: Element Quiz Question
David Lindblom
Fri, 3 Mar 2017 17:00:20 +0000
Re: Element Quiz Question
David Lindblom
Fri, 10 Mar 2017 18:09:44 +0000
Re: Element Quiz Question
David Lindblom
Fri, 31 Mar 2017 16:25:50 +0000
New Sender Decker, Scott UTAS
Re: Any Traffic Out There, awful quiet
Decker, Scott UTAS
Mon, 6 Mar 2017 18:54:24 +0000
Re: Any Traffic Out There, awful quiet
Decker, Scott UTAS
Mon, 6 Mar 2017 19:34:36 +0000
Any Visula users out there current or past?
Decker, Scott UTAS
Wed, 8 Mar 2017 17:32:50 +0000
Re: [External] Re: [TN] Any Traffic Out There, awful quiet
Decker, Scott UTAS
Mon, 6 Mar 2017 19:47:53 +0000
New Sender Dennis Saputelli
Re: Round, Non Critical Tolerance, PWB Index pins
Dennis Saputelli
Mon, 6 Mar 2017 13:26:02 -0800
New Sender Douglas Pauls
Re: Any Traffic Out There, awful quiet
Douglas Pauls
Mon, 6 Mar 2017 13:42:46 -0600
Re: BGA periphery keep out zone
Douglas Pauls
Tue, 7 Mar 2017 15:12:13 -0600
Re: Element Quiz Answer
Douglas Pauls
Fri, 31 Mar 2017 13:34:53 -0500
Re: Element Quiz Question
Douglas Pauls
Fri, 3 Mar 2017 11:27:27 -0600
Re: Element Quiz Question
Douglas Pauls
Fri, 3 Mar 2017 12:56:54 -0600
Re: Element Quiz Question
Douglas Pauls
Fri, 31 Mar 2017 09:45:21 -0500
Re: NTC
Douglas Pauls
Fri, 31 Mar 2017 13:48:31 -0500
New Sender Drew meyer
Re: Any Traffic Out There, awful quiet
Drew meyer
Mon, 6 Mar 2017 18:43:58 +0000
Re: Element Quiz Question
Drew meyer
Fri, 10 Mar 2017 07:56:10 -0600
New Sender Ed Popielarski
Re: best of luck for wright brothers
Ed Popielarski
Thu, 30 Mar 2017 21:52:20 +0000
Re: circuit board layout optimization for manufacturing
Ed Popielarski
Thu, 30 Mar 2017 18:07:21 +0000
Re: Round, Non Critical Tolerance, PWB Index pins
Ed Popielarski
Mon, 6 Mar 2017 20:43:22 +0000
Re: WG: [TN] Screen On Insulation
Ed Popielarski
Mon, 20 Mar 2017 16:52:35 +0000
New Sender George Wenger
Re: Element Quiz Question
George Wenger
Thu, 9 Mar 2017 20:30:19 -0500
New Sender Giamis, Andy
Re: IPC-TM-650, 2.4.22, Bow & Twist
Giamis, Andy
Wed, 29 Mar 2017 04:01:18 +0000
Screen On Insulation - E-field break-down
Giamis, Andy
Tue, 21 Mar 2017 15:35:39 +0000
Re: WG: [TN] Screen On Insulation
Giamis, Andy
Tue, 21 Mar 2017 15:03:11 +0000
New Sender Graham Collins
changing lead-free alloys? SN100C to Sn995
Graham Collins
Fri, 24 Mar 2017 12:44:02 +0000
New Sender GRIVON Arnaud
[COM] Tin-Lead Assembly of SAC305 PTH Connectors
GRIVON Arnaud
Thu, 23 Mar 2017 10:01:17 +0100
Re: [COM] Tin-Lead Assembly of SAC305 PTH Connectors
GRIVON Arnaud
Thu, 23 Mar 2017 17:42:39 +0100
New Sender Grossmann, Günter
AW: [TN] IPC-TM-650, 2.4.22, Bow & Twist
Grossmann, Günter
Wed, 29 Mar 2017 08:17:51 +0000
AW: [TN] [COM] Tin-Lead Assembly of SAC305 PTH Connectors
Grossmann, Günter
Thu, 23 Mar 2017 12:50:01 +0000
New Sender Gumpert, Ben
Re: J-STD-001FS Section 8.3
Gumpert, Ben
Wed, 15 Mar 2017 10:37:20 +0000
Re: Solder "Splash" on ENIG Gold - Is this a defect?
Gumpert, Ben
Wed, 22 Mar 2017 20:54:26 +0000
New Sender Ioan Tempea
Labor to material ratio
Ioan Tempea
Thu, 23 Mar 2017 19:01:57 +0000
New Sender Iulia Muntele
Re: BGA periphery keep out zone
Iulia Muntele
Tue, 7 Mar 2017 14:06:37 -0600
Re: BGA periphery keep out zone
Iulia Muntele
Tue, 7 Mar 2017 14:33:33 -0600
Re: grunge at bottom of tinning solder pot
Iulia Muntele
Tue, 7 Mar 2017 12:55:19 -0600
Re: grunge at bottom of tinning solder pot
Iulia Muntele
Tue, 7 Mar 2017 13:03:48 -0600
Re: IPC-TM-650, 2.4.22, Bow & Twist
Iulia Muntele
Wed, 29 Mar 2017 07:58:47 -0500
New Sender James Head
Re: Any Visula users out there current or past?
James Head
Wed, 8 Mar 2017 17:37:26 +0000
Re: Element Quiz Question
James Head
Fri, 10 Mar 2017 07:26:06 +0000
New Sender John Maxwell
Re: Element Quiz Answer
John Maxwell
Tue, 21 Mar 2017 11:02:19 -0400
Re: Element Quiz Question
John Maxwell
Thu, 9 Mar 2017 20:30:59 -0500
Re: Screen On Insulation - E-field break-down
John Maxwell
Tue, 21 Mar 2017 12:22:56 -0400
New Sender Jose A Rios
Re: Active Panel Plant Gurus, indexing pins
Jose A Rios
Tue, 7 Mar 2017 15:05:06 +0000
Re: BGA periphery keep out zone
Jose A Rios
Tue, 7 Mar 2017 21:18:30 +0000
Re: IPC-TM-650, 2.4.22, Bow & Twist
Jose A Rios
Tue, 28 Mar 2017 19:09:04 +0000
Re: IPC-TM-650, 2.4.22, Bow & Twist
Jose A Rios
Tue, 28 Mar 2017 19:32:16 +0000
J-STD-001FS Section 8.3
Jose A Rios
Wed, 15 Mar 2017 05:06:20 +0000
Re: Preconditioning Bake PWB coupons before Thermal Stress
Jose A Rios
Wed, 15 Mar 2017 00:23:30 +0000
Re: PWB Laminate Swelling
Jose A Rios
Wed, 8 Mar 2017 17:11:34 +0000
New Sender Joyce Koo
Re: AW: [TN] WG: [TN] Screen On Insulation
Joyce Koo
Tue, 21 Mar 2017 08:54:11 -0400
best of luck for wright brothers
Joyce Koo
Thu, 30 Mar 2017 16:23:18 -0400
Re: circuit board layout optimization for manufacturing
Joyce Koo
Thu, 30 Mar 2017 14:08:08 -0400
Re: Cyberoptics LSM2
Joyce Koo
Wed, 15 Mar 2017 09:20:20 -0400
Re: Differential Scanning Calorimetry
Joyce Koo
Thu, 9 Mar 2017 11:40:17 -0500
Re: Element Quiz Answer
Joyce Koo
Thu, 9 Mar 2017 16:15:36 -0500
Re: Element Quiz Question
Joyce Koo
Fri, 3 Mar 2017 09:00:22 -0500
Re: Element Quiz Question
Joyce Koo
Fri, 24 Mar 2017 14:57:09 -0400
Re: Element Quiz Question
Joyce Koo
Fri, 31 Mar 2017 15:11:53 -0400
gift from nasa - i believe all of you wanted
Joyce Koo
Mon, 13 Mar 2017 09:20:21 -0400
humidity control
Joyce Koo
Wed, 8 Mar 2017 08:42:44 -0500
Re: humidity control
Joyce Koo
Wed, 8 Mar 2017 09:45:23 -0500
Re: humidity control
Joyce Koo
Wed, 8 Mar 2017 13:14:17 -0500
Re: humidity control
Joyce Koo
Wed, 8 Mar 2017 15:36:29 -0500
Re: humidity control
Joyce Koo
Wed, 8 Mar 2017 15:54:12 -0500
Re: IPC-TM-650, 2.4.22, Bow & Twist
Joyce Koo
Tue, 28 Mar 2017 15:58:17 -0400
Re: IPC-TM-650, 2.4.22, Bow & Twist
Joyce Koo
Wed, 29 Mar 2017 10:16:37 -0400
Re: iron soldering
Joyce Koo
Thu, 30 Mar 2017 09:46:25 -0400
Re: MIL spec for resistors
Joyce Koo
Fri, 3 Mar 2017 14:10:38 -0500
Re: PWB Laminate Swelling
Joyce Koo
Wed, 8 Mar 2017 13:20:27 -0500
Re: WG: [TN] Screen On Insulation
Joyce Koo
Mon, 20 Mar 2017 16:28:15 -0400
Re: WG: [TN] Screen On Insulation
Joyce Koo
Mon, 20 Mar 2017 16:29:19 -0400
Re: WG: [TN] Screen On Insulation
Joyce Koo
Tue, 21 Mar 2017 13:42:54 -0400
New Sender Julie Silk
Re: grunge at bottom of tinning solder pot
Julie Silk
Wed, 15 Mar 2017 12:36:36 -0500
Re: Reduced size PCB pads for 0402 capacitors on back side of BGA
Julie Silk
Wed, 15 Mar 2017 12:43:13 -0500
New Sender Ken Barton
MIL spec for resistors
Ken Barton
Fri, 3 Mar 2017 18:01:02 +0000
New Sender Ken Harp
Re: MIL spec for resistors
Ken Harp
Fri, 3 Mar 2017 10:24:23 -0800
New Sender Larry Dzaugis
Re: Element Quiz Question
Larry Dzaugis
Fri, 24 Mar 2017 08:00:01 -0400
Re: Element Quiz Question
Larry Dzaugis
Fri, 24 Mar 2017 09:23:18 -0400
New Sender Lars Tegelberg
Component supplier
Lars Tegelberg
Mon, 20 Mar 2017 11:32:53 +0100
New Sender lduso - Diamond-MT.com
Re: WG: [TN] Screen On Insulation
lduso - Diamond-MT.com
Mon, 20 Mar 2017 12:46:22 -0400
Re: WG: [TN] Screen On Insulation
lduso - Diamond-MT.com
Mon, 20 Mar 2017 16:24:07 -0400
New Sender Lee Hitchens
Re: WG: [TN] Screen On Insulation
Lee Hitchens
Tue, 21 Mar 2017 00:11:09 +0700
New Sender Leland Woodall
Cyberoptics LSM2
Leland Woodall
Tue, 14 Mar 2017 20:14:19 +0000
Re: Element Quiz Question
Leland Woodall
Fri, 3 Mar 2017 14:57:47 +0000
Re: Element Quiz Question
Leland Woodall
Fri, 24 Mar 2017 12:01:41 +0000
Re: Element Quiz Question
Leland Woodall
Fri, 31 Mar 2017 13:46:06 +0000
New Sender Lum Wee Mei
Re: IPC-TM-650, 2.4.22, Bow & Twist
Lum Wee Mei
Wed, 29 Mar 2017 03:14:26 +0000
New Sender Lyon Yuan
iron soldering
Lyon Yuan
Thu, 30 Mar 2017 20:12:50 +0800
PCBA Manufacturing Process introduction
Lyon Yuan
Sat, 11 Mar 2017 11:47:03 +0800
New Sender Massoud Shakeri
Re: PCBA Manufacturing Process introduction
Massoud Shakeri
Fri, 10 Mar 2017 21:17:21 -0800
New Sender Matthias Mansfeld
Re: Element Quiz Answer
Matthias Mansfeld
Thu, 2 Mar 2017 16:16:35 +0100
New Sender May, William D (Dean) CIV NSWC Crane, JXMP
Re: Element Quiz Question
May, William D (Dean) CIV NSWC Crane, JXMP
Fri, 3 Mar 2017 14:10:42 +0000
Re: Element Quiz Question
May, William D (Dean) CIV NSWC Crane, JXMP
Fri, 10 Mar 2017 13:05:07 +0000
New Sender Mordechai Kirshenbaum
Re: Element Quiz Question
Mordechai Kirshenbaum
Fri, 10 Mar 2017 12:33:58 +0000
New Sender Nutting, Phil
circuit board layout optimization for manufacturing
Nutting, Phil
Thu, 30 Mar 2017 17:56:58 +0000
grunge at bottom of tinning solder pot
Nutting, Phil
Tue, 7 Mar 2017 18:12:55 +0000
Re: grunge at bottom of tinning solder pot
Nutting, Phil
Tue, 7 Mar 2017 18:31:35 +0000
Re: grunge at bottom of tinning solder pot
Nutting, Phil
Tue, 7 Mar 2017 18:37:00 +0000
Re: grunge at bottom of tinning solder pot
Nutting, Phil
Tue, 7 Mar 2017 18:52:08 +0000
Re: grunge at bottom of tinning solder pot
Nutting, Phil
Wed, 15 Mar 2017 18:03:35 +0000
New Sender pietro
Re: Element Quiz Question
pietro
Fri, 31 Mar 2017 16:02:36 +0200
New Sender Ramon Essers | ETECH-trainingen
Re: AW: [TN] IPC-TM-650, 2.4.22, Bow & Twist
Ramon Essers | ETECH-trainingen
Wed, 29 Mar 2017 10:42:51 +0200
Re: iron soldering
Ramon Essers | ETECH-trainingen
Thu, 30 Mar 2017 14:36:31 +0200
New Sender Richard Krug
Solder "Splash" on ENIG Gold - Is this a defect?
Richard Krug
Tue, 21 Mar 2017 17:35:54 +0000
New Sender Robert Kondner
Re: AW: [TN] WG: [TN] Screen On Insulation
Robert Kondner
Tue, 21 Mar 2017 09:21:00 -0600
Screen On Insulation
Robert Kondner
Fri, 17 Mar 2017 16:10:34 -0400
Re: Screen On Insulation
Robert Kondner
Fri, 17 Mar 2017 16:40:51 -0400
Re: Screen On Insulation
Robert Kondner
Fri, 17 Mar 2017 17:54:10 -0400
Re: WG: [TN] Screen On Insulation
Robert Kondner
Mon, 20 Mar 2017 12:05:30 -0400
Re: WG: [TN] Screen On Insulation
Robert Kondner
Mon, 20 Mar 2017 13:39:09 -0400
Re: WG: [TN] Screen On Insulation
Robert Kondner
Tue, 21 Mar 2017 09:12:00 -0600
Re: WG: [TN] Screen On Insulation
Robert Kondner
Tue, 21 Mar 2017 11:15:59 -0600
Re: WG: [TN] Screen On Insulation
Robert Kondner
Tue, 21 Mar 2017 11:27:07 -0600
New Sender Roger Mack
Re: Reduced size PCB pads for 0402 capacitors on back side of BGA
Roger Mack
Thu, 2 Mar 2017 08:50:20 -0600
New Sender Ron Feyereisen
Re: Element Quiz Question
Ron Feyereisen
Fri, 3 Mar 2017 16:07:25 +0000
New Sender Stadem, Richard D.
Re: Any Traffic Out There, awful quiet
Stadem, Richard D.
Mon, 6 Mar 2017 18:56:55 +0000
Re: BGA periphery keep out zone
Stadem, Richard D.
Tue, 7 Mar 2017 20:25:39 +0000
Re: BGA periphery keep out zone
Stadem, Richard D.
Tue, 7 Mar 2017 21:07:24 +0000
Re: BGA periphery keep out zone
Stadem, Richard D.
Tue, 7 Mar 2017 21:17:12 +0000
Re: circuit board layout optimization for manufacturing
Stadem, Richard D.
Thu, 30 Mar 2017 20:29:46 +0000
Re: Element Quiz Question
Stadem, Richard D.
Fri, 3 Mar 2017 18:19:14 +0000
Re: Element Quiz Question
Stadem, Richard D.
Fri, 31 Mar 2017 15:04:18 +0000
Re: grunge at bottom of tinning solder pot
Stadem, Richard D.
Tue, 7 Mar 2017 18:25:19 +0000
Re: IPC-TM-650, 2.4.22, Bow & Twist
Stadem, Richard D.
Tue, 28 Mar 2017 19:20:13 +0000
Re: IPC-TM-650, 2.4.22, Bow & Twist
Stadem, Richard D.
Tue, 28 Mar 2017 19:29:23 +0000
Re: IPC-TM-650, 2.4.22, Bow & Twist
Stadem, Richard D.
Wed, 29 Mar 2017 12:53:42 +0000
Re: NTC
Stadem, Richard D.
Fri, 31 Mar 2017 18:40:40 +0000
Re: PWB Laminate Swelling
Stadem, Richard D.
Wed, 8 Mar 2017 16:39:58 +0000
Re: PWB Laminate Swelling
Stadem, Richard D.
Wed, 8 Mar 2017 17:29:23 +0000
Re: Reduced size PCB pads for 0402 capacitors on back side of BGA
Stadem, Richard D.
Thu, 2 Mar 2017 16:05:01 +0000
Re: Solder "Splash" on ENIG Gold - Is this a defect?
Stadem, Richard D.
Tue, 21 Mar 2017 18:24:08 +0000
New Sender Steve Gregory
Re: humidity control
Steve Gregory
Wed, 8 Mar 2017 07:42:45 -0700
Re: MIL spec for resistors
Steve Gregory
Fri, 3 Mar 2017 11:18:35 -0700
New Sender Steven Creswick
Re: WG: [TN] Screen On Insulation
Steven Creswick
Mon, 20 Mar 2017 12:50:55 -0400
New Sender Theodore J. Tontis
Re: WG: [TN] Screen On Insulation
Theodore J. Tontis
Mon, 20 Mar 2017 16:38:27 +0000
Re: WG: [TN] Screen On Insulation
Theodore J. Tontis
Mon, 20 Mar 2017 19:57:27 +0000
Re: WG: [TN] Screen On Insulation
Theodore J. Tontis
Tue, 21 Mar 2017 16:49:43 +0000
Re: WG: [TN] Screen On Insulation
Theodore J. Tontis
Tue, 21 Mar 2017 17:10:21 +0000
Re: WG: [TN] Screen On Insulation
Theodore J. Tontis
Tue, 21 Mar 2017 18:57:07 +0000
New Sender Tom Brendlinger
Re: BGA periphery keep out zone
Tom Brendlinger
Tue, 7 Mar 2017 15:24:55 -0500
Re: MIL spec for resistors
Tom Brendlinger
Fri, 3 Mar 2017 13:09:52 -0500
New Sender Torsten Hagge
AW: [TN] WG: [TN] Screen On Insulation
Torsten Hagge
Tue, 21 Mar 2017 09:48:55 +0000
WG: [TN] Screen On Insulation
Torsten Hagge
Mon, 20 Mar 2017 13:17:02 +0000
New Sender Vladimir
Re: [COM] Tin-Lead Assembly of SAC305 PTH Connectors
Vladimir
Thu, 23 Mar 2017 07:23:49 -0400
New Sender Wayne Thayer
Re: grunge at bottom of tinning solder pot
Wayne Thayer
Tue, 7 Mar 2017 18:35:57 +0000
Re: grunge at bottom of tinning solder pot
Wayne Thayer
Tue, 7 Mar 2017 18:44:11 +0000
Re: humidity control
Wayne Thayer
Wed, 8 Mar 2017 14:14:26 +0000
Re: humidity control
Wayne Thayer
Wed, 8 Mar 2017 16:57:00 +0000
Re: humidity control
Wayne Thayer
Wed, 8 Mar 2017 21:46:57 +0000
Re: PWB Laminate Swelling
Wayne Thayer
Wed, 8 Mar 2017 16:24:49 +0000
Re: Round, Non Critical Tolerance, PWB Index pins
Wayne Thayer
Tue, 7 Mar 2017 02:19:45 +0000
Re: Screen On Insulation
Wayne Thayer
Fri, 17 Mar 2017 21:23:28 +0000
Re: WG: [TN] Screen On Insulation
Wayne Thayer
Mon, 20 Mar 2017 18:46:17 +0000
Re: WG: [TN] Screen On Insulation
Wayne Thayer
Tue, 21 Mar 2017 14:42:40 +0000
New Sender Yuan-chia Joyce Koo
Re: Solder "Splash" on ENIG Gold - Is this a defect?
Yuan-chia Joyce Koo
Wed, 22 Mar 2017 19:49:07 -0400

ATOM RSS1 RSS2