TECHNET Archives

August 2016

TechNet@IPC.ORG
Options: Hide Table of Contents

Subject Sorted by Subject, Chronologically

From

Date
New Thread AW: Techtronic 576 Curve Tracer
AW: Techtronic 576 Curve Tracer
Grossmann, Günter
Fri, 19 Aug 2016 14:26:26 +0000
New Thread AW: [TN] looking for medium resistance material
AW: [TN] looking for medium resistance material
Torsten Hagge
Wed, 10 Aug 2016 06:31:26 +0000
New Thread Bare board testing - low continuity threshold
Re: Bare board testing - low continuity threshold
Wayne Thayer - EXT
Wed, 31 Aug 2016 14:17:54 +0000
Bare board testing - low continuity threshold
Craig Sullivan
Wed, 31 Aug 2016 09:30:39 -0400
New Thread Brian Ellis
Re: Brian Ellis
Inge Hernefjord
Thu, 4 Aug 2016 08:24:39 +0200
New Thread FTIR
Re: FTIR
Bev Christian
Tue, 2 Aug 2016 16:23:29 -0400
Re: FTIR
Richard Kraszewski
Tue, 2 Aug 2016 19:36:35 +0000
Re: FTIR
Douglas Pauls
Tue, 2 Aug 2016 14:05:53 -0500
Re: FTIR
Richard Kraszewski
Tue, 2 Aug 2016 13:17:51 +0000
Re: FTIR
Douglas Pauls
Tue, 2 Aug 2016 07:24:05 -0500
Re: FTIR
Gerald Bogert (Contractor)
Tue, 2 Aug 2016 06:32:35 -0400
Re: FTIR
Bev Christian
Mon, 1 Aug 2016 15:41:06 -0400
Re: FTIR
Bev Christian
Mon, 1 Aug 2016 12:08:15 -0400
Re: FTIR
Stewart McCracken
Mon, 1 Aug 2016 17:03:14 +0100
FTIR
Graham Naisbitt
Mon, 1 Aug 2016 16:56:54 +0100
New Thread FTIR and Assembly Process Control
Re: FTIR and Assembly Process Control
Bev Christian
Tue, 2 Aug 2016 08:01:02 -0400
Re: FTIR and Assembly Process Control
Graham Naisbitt
Tue, 2 Aug 2016 11:05:59 +0100
New Thread Half Fractionals
Re: Half Fractionals
Drew meyer
Thu, 25 Aug 2016 18:08:21 +0000
Re: Half Fractionals
Joyce Koo
Thu, 25 Aug 2016 13:38:42 -0400
Re: Half Fractionals
Douglas Pauls
Thu, 25 Aug 2016 11:10:05 -0500
Re: Half Fractionals
Joyce Koo
Thu, 25 Aug 2016 12:01:50 -0400
Re: Half Fractionals
John Burke
Thu, 25 Aug 2016 13:15:34 +0000
Half Fractionals
Douglas Pauls
Thu, 25 Aug 2016 07:50:25 -0500
New Thread Harness bend radii
Re: Harness bend radii
Inge Hernefjord
Thu, 18 Aug 2016 23:08:54 +0200
Re: Harness bend radii
Wayne Thayer - EXT
Thu, 18 Aug 2016 17:55:52 +0000
Re: Harness bend radii
Stadem, Richard D.
Thu, 18 Aug 2016 13:41:51 +0000
Re: Harness bend radii
Gumpert, Ben
Thu, 18 Aug 2016 10:28:43 +0000
Re: Harness bend radii
Wayne Thayer - EXT
Wed, 17 Aug 2016 22:22:51 +0000
Harness bend radii
Wayne Thayer - EXT
Wed, 17 Aug 2016 17:21:38 +0000
New Thread looking for medium resistance material
Re: looking for medium resistance material
Inge Hernefjord
Fri, 12 Aug 2016 23:12:44 +0200
Re: looking for medium resistance material
Carl Van Wormer
Fri, 12 Aug 2016 13:34:14 +0000
Re: looking for medium resistance material
Inge Hernefjord
Fri, 12 Aug 2016 09:54:02 +0200
Re: looking for medium resistance material
Carl Van Wormer
Thu, 11 Aug 2016 16:06:45 +0000
Re: looking for medium resistance material
Inge Hernefjord
Wed, 10 Aug 2016 18:40:51 +0200
Re: looking for medium resistance material
Inge Hernefjord
Wed, 10 Aug 2016 18:29:23 +0200
Re: looking for medium resistance material
Stadem, Richard D.
Wed, 10 Aug 2016 16:02:48 +0000
Re: looking for medium resistance material
Ahne Oosterhof
Wed, 10 Aug 2016 08:43:18 -0700
Re: looking for medium resistance material
Carl Van Wormer
Wed, 10 Aug 2016 14:46:03 +0000
Re: looking for medium resistance material
John Burke
Wed, 10 Aug 2016 07:43:23 -0700
Re: looking for medium resistance material
John Burke
Wed, 10 Aug 2016 07:37:57 -0700
Re: looking for medium resistance material
Louis Hart
Wed, 10 Aug 2016 14:27:39 +0000
Re: looking for medium resistance material
John Burke
Wed, 10 Aug 2016 06:19:33 -0700
Re: looking for medium resistance material
Carl Van Wormer
Wed, 10 Aug 2016 13:15:44 +0000
Re: looking for medium resistance material
Joyce Koo
Wed, 10 Aug 2016 09:13:27 -0400
Re: looking for medium resistance material
Inge Hernefjord
Wed, 10 Aug 2016 14:42:50 +0200
Re: looking for medium resistance material
Drew meyer
Wed, 10 Aug 2016 11:47:54 +0000
Re: looking for medium resistance material
Inge Hernefjord
Wed, 10 Aug 2016 10:09:19 +0200
Re: looking for medium resistance material
Carl Van Wormer
Tue, 9 Aug 2016 15:11:47 +0000
Re: looking for medium resistance material
Stadem, Richard D.
Tue, 9 Aug 2016 12:54:51 +0000
Re: looking for medium resistance material
Mike Fenner
Tue, 9 Aug 2016 06:43:58 +0100
Re: looking for medium resistance material
Rivera, Raye
Mon, 8 Aug 2016 18:19:15 +0000
Re: looking for medium resistance material
Joyce Koo
Mon, 8 Aug 2016 13:21:07 -0400
Re: looking for medium resistance material
Dennis Fritz
Mon, 8 Aug 2016 12:47:24 -0400
Re: looking for medium resistance material
Joyce Koo
Mon, 8 Aug 2016 11:51:40 -0400
Re: looking for medium resistance material
Carl Van Wormer
Mon, 8 Aug 2016 14:15:35 +0000
looking for medium resistance material
Joyce Koo
Mon, 8 Aug 2016 09:22:42 -0400
Re: looking for medium resistance material
Steven Creswick
Sun, 7 Aug 2016 12:45:18 -0400
Re: looking for medium resistance material
Inge Hernefjord
Sun, 7 Aug 2016 11:46:55 +0200
Re: looking for medium resistance material
Inge Hernefjord
Sun, 7 Aug 2016 11:36:48 +0200
Re: looking for medium resistance material
Steven Creswick
Sun, 7 Aug 2016 05:22:31 -0400
looking for medium resistance material
Carl Van Wormer
Sun, 7 Aug 2016 03:40:38 +0000
New Thread Min Cu Thickness per IPC-6013 - Question about "rework"
Min Cu Thickness per IPC-6013 - Question about "rework"
MacFadden, Todd
Mon, 15 Aug 2016 21:46:08 +0000
New Thread MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
Re: MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
John Burke
Fri, 26 Aug 2016 22:41:05 +0800
Re: MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
Bhanu Sood
Fri, 26 Aug 2016 09:17:12 -0400
Re: MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
Wayne Thayer - EXT
Thu, 25 Aug 2016 20:28:41 +0000
Re: MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
Joyce Koo
Thu, 25 Aug 2016 15:27:45 -0400
Re: MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
John Maxwell
Thu, 25 Aug 2016 15:23:48 -0400
MuRata, ceramic caps, 10micro F,, X5R, 25V, 1206
Victor Hernandez
Thu, 25 Aug 2016 18:59:31 +0000
New Thread R: [TN] Solder under SMD Pads thickness Mins and Maxes.
R: [TN] Solder under SMD Pads thickness Mins and Maxes.
SALA GABRIELE
Mon, 29 Aug 2016 22:41:21 +0200
New Thread Solder under SMD Pads thickness Mins and Maxes.
Re: Solder under SMD Pads thickness Mins and Maxes.
Stadem, Richard D.
Wed, 31 Aug 2016 13:02:29 +0000
Re: Solder under SMD Pads thickness Mins and Maxes.
Yuan-chia Joyce Koo
Tue, 30 Aug 2016 19:52:18 -0400
Re: Solder under SMD Pads thickness Mins and Maxes.
Wayne Thayer - EXT
Tue, 30 Aug 2016 22:09:39 +0000
Re: Solder under SMD Pads thickness Mins and Maxes.
Yuan-chia Joyce Koo
Tue, 30 Aug 2016 17:58:07 -0400
Re: Solder under SMD Pads thickness Mins and Maxes.
Stadem, Richard D.
Mon, 29 Aug 2016 20:36:58 +0000
Solder under SMD Pads thickness Mins and Maxes.
Decker, Scott UTAS
Mon, 29 Aug 2016 20:12:05 +0000
New Thread Spot Facing areas for mounting hole of connectors.
Re: Spot Facing areas for mounting hole of connectors.
John Burke
Fri, 19 Aug 2016 20:05:28 -0700
Re: Spot Facing areas for mounting hole of connectors.
Wayne Thayer - EXT
Fri, 19 Aug 2016 23:15:26 +0000
Spot Facing areas for mounting hole of connectors.
Decker, Scott UTAS
Fri, 19 Aug 2016 22:59:50 +0000
New Thread SV: [TN] Harness bend radii
SV: [TN] Harness bend radii
Inge Hernefjord
Thu, 18 Aug 2016 00:03:45 +0200
New Thread Techtronic 576 Curve Tracer
Re: Techtronic 576 Curve Tracer
Carl Van Wormer
Fri, 19 Aug 2016 15:06:15 +0000
Re: Techtronic 576 Curve Tracer
Carl Van Wormer
Fri, 19 Aug 2016 14:27:04 +0000
Techtronic 576 Curve Tracer
Victor Hernandez
Fri, 19 Aug 2016 14:09:30 +0000
New Thread [External] Re: [TN] Spot Facing areas for mounting hole of connectors.
Re: [External] Re: [TN] Spot Facing areas for mounting hole of connectors.
Decker, Scott UTAS
Mon, 29 Aug 2016 20:04:10 +0000
Re: [External] Re: [TN] Spot Facing areas for mounting hole of connectors.
Wayne Thayer - EXT
Mon, 22 Aug 2016 18:18:09 +0000
Re: [External] Re: [TN] Spot Facing areas for mounting hole of connectors.
Stadem, Richard D.
Mon, 22 Aug 2016 14:57:02 +0000
Re: [External] Re: [TN] Spot Facing areas for mounting hole of connectors.
Decker, Scott UTAS
Mon, 22 Aug 2016 14:36:56 +0000
New Thread [NTC] TN is still ON
[NTC] TN is still ON
Ioan Tempea
Thu, 4 Aug 2016 11:41:07 +0000

ATOM RSS1 RSS2