LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


September 2015


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

Antwort: [TN] Selective Conformal Coat Systems (1 message)
Bees wax (7 messages)
BGA Reworked Intermetalic (2 messages)
BGA Reworked Intermetallic (22 messages)
Board with Nickel/Gold plating (7 messages)
Capacitor with AgPdCu Terminations... (3 messages)
Component solder reliability (16 messages)
Dumb vertical fill question... (3 messages)
Element Quiz Answer (23 messages)
Element Quiz Question (34 messages)
Element Quiz Status (8 messages)
ENEPIG Question? (16 messages)
FW: Supported & Unsupported holes (2 messages)
FW: [DC] PCB West TODAY! (1 message)
Land bond strength on rigid board (3 messages)
laptop keyboard schematic (4 messages)
Magnification for Inspection of Cleanliness (3 messages)
Master glass print for core circuitize (3 messages)
Mil-E-917 and Impact on Component Leads (1 message)
NTC - personnel help (1 message)
NTC Clumpy and Kloumpios (1 message)
NTC NTC NTC [TN] Element Quiz Answer (1 message)
Pick and Place Performance (Reject Rate) (2 messages)
PWB Core processing (1 message)
PWB/PCB misregistration, (4 messages)
PWB/PCH square punch die (2 messages)
RES: [TN] Element Quiz Question (2 messages)
RES: [TN] Pick and Place Performance (Reject Rate) (3 messages)
Selective Conformal Coat Systems (22 messages)
Solder paste print thickness vs reflowed thickness for SMT packages (10 messages)
Solder paste print thickness vs. reflowed thickness for SMT packages (2 messages)
Supported & Unsupported holes (4 messages)
TechNet Digest - 11 Sep 2015 to 14 Sep 2015 (#2015-173) (1 message)
Textured Solder? (3 messages)
Water soluble masking materials (3 messages)
Water soluble masking materials - Bayesian Filter detected spam (1 message)
Why Dad Why? Ampacity Degradation Reasoning in A610/20 (4 messages)
[NTC -TN] Element Quiz Answer (2 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

Antwort: [TN] Selective Conformal Coat Systems

Antwort: [TN] Selective Conformal Coat Systems

Frank Kriesch <[log in to unmask]>

Fri, 4 Sep 2015 11:21:23 +0200

42 lines

New Thread

Bees wax

Bees wax

Victor Hernandez <[log in to unmask]>

Mon, 14 Sep 2015 09:29:14 -0500

30 lines

Re: Bees wax

David Hillman <[log in to unmask]>

Mon, 14 Sep 2015 09:32:53 -0500

47 lines

Re: Bees wax

lduso - Diamond-MT.com <[log in to unmask]>

Mon, 14 Sep 2015 10:35:37 -0400

59 lines

Re: Bees wax

Bhanu Sood <[log in to unmask]>

Mon, 14 Sep 2015 10:57:50 -0400

64 lines

Re: Bees wax

Wayne Thayer <[log in to unmask]>

Mon, 14 Sep 2015 15:04:04 +0000

68 lines

Re: Bees wax

Brian Ellis <[log in to unmask]>

Mon, 14 Sep 2015 18:30:14 +0300

35 lines

Re: Bees wax

Nutting, Phil <[log in to unmask]>

Mon, 14 Sep 2015 18:15:00 +0000

45 lines

New Thread

BGA Reworked Intermetalic

BGA Reworked Intermetalic

Datacom - Juliano Ribeiro <[log in to unmask]>

Wed, 16 Sep 2015 10:08:12 -0300

51 lines

Re: BGA Reworked Intermetalic

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 09:12:22 -0400

74 lines

New Thread

BGA Reworked Intermetallic

Re: BGA Reworked Intermetallic

Victor Hernandez <[log in to unmask]>

Wed, 16 Sep 2015 09:09:05 -0500

89 lines

Re: BGA Reworked Intermetallic

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 10:38:18 -0400

111 lines

Re: BGA Reworked Intermetallic

Stadem, Richard D. <[log in to unmask]>

Wed, 16 Sep 2015 14:47:38 +0000

117 lines

Re: BGA Reworked Intermetallic

Victor Hernandez <[log in to unmask]>

Wed, 16 Sep 2015 09:50:39 -0500

78 lines

Re: BGA Reworked Intermetallic

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 10:56:59 -0400

142 lines

Re: BGA Reworked Intermetallic

Stadem, Richard D. <[log in to unmask]>

Wed, 16 Sep 2015 15:47:18 +0000

96 lines

Re: BGA Reworked Intermetallic

Joyce Koo <[log in to unmask]>

Wed, 16 Sep 2015 12:17:05 -0400

145 lines

Re: BGA Reworked Intermetallic

David Hillman <[log in to unmask]>

Wed, 16 Sep 2015 21:44:20 -0500

148 lines

Re: BGA Reworked Intermetallic

David Hillman <[log in to unmask]>

Wed, 16 Sep 2015 21:49:40 -0500

186 lines

Re: BGA Reworked Intermetallic

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 22:52:59 -0400

158 lines

Re: BGA Reworked Intermetallic

Victor Hernandez <[log in to unmask]>

Thu, 17 Sep 2015 06:24:06 -0500

98 lines

Re: BGA Reworked Intermetallic

David Hillman <[log in to unmask]>

Thu, 17 Sep 2015 07:22:01 -0500

203 lines

Re: BGA Reworked Intermetallic

Vladimir Igoshev <[log in to unmask]>

Thu, 17 Sep 2015 08:37:07 -0400

195 lines

Re: BGA Reworked Intermetallic

Joyce Koo <[log in to unmask]>

Thu, 17 Sep 2015 08:37:21 -0400

203 lines

Re: BGA Reworked Intermetallic

David Hillman <[log in to unmask]>

Thu, 17 Sep 2015 07:47:19 -0500

245 lines

Re: BGA Reworked Intermetallic

Joyce Koo <[log in to unmask]>

Thu, 17 Sep 2015 08:47:43 -0400

181 lines

Re: BGA Reworked Intermetallic

Joyce Koo <[log in to unmask]>

Thu, 17 Sep 2015 09:00:16 -0400

249 lines

Re: BGA Reworked Intermetallic

Vladimir Igoshev <[log in to unmask]>

Thu, 17 Sep 2015 09:03:59 -0400

220 lines

Re: BGA Reworked Intermetallic

Victor Hernandez <[log in to unmask]>

Thu, 17 Sep 2015 08:27:49 -0500

133 lines

Re: BGA Reworked Intermetallic

Theodore J Tontis <[log in to unmask]>

Thu, 17 Sep 2015 14:04:32 +0000

149 lines

Re: BGA Reworked Intermetallic

Stadem, Richard D. <[log in to unmask]>

Thu, 17 Sep 2015 14:39:21 +0000

174 lines

Re: BGA Reworked Intermetallic

Joyce Koo <[log in to unmask]>

Thu, 17 Sep 2015 12:12:22 -0400

274 lines

New Thread

Board with Nickel/Gold plating

Board with Nickel/Gold plating

Ravinder Ajmani <[log in to unmask]>

Thu, 10 Sep 2015 21:10:53 +0000

71 lines

Re: Board with Nickel/Gold plating

Mattix, Dwight <[log in to unmask]>

Thu, 10 Sep 2015 21:32:33 +0000

101 lines

Re: Board with Nickel/Gold plating

Jason Zhao <[log in to unmask]>

Thu, 10 Sep 2015 16:32:41 -0500

103 lines

Re: Board with Nickel/Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 10 Sep 2015 21:46:33 +0000

115 lines

Re: Board with Nickel/Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 10 Sep 2015 21:54:22 +0000

131 lines

Re: Board with Nickel/Gold plating

Ravinder Ajmani <[log in to unmask]>

Thu, 10 Sep 2015 22:27:59 +0000

167 lines

Re: Board with Nickel/Gold plating

Stadem, Richard D. <[log in to unmask]>

Mon, 14 Sep 2015 15:27:04 +0000

181 lines

New Thread

Capacitor with AgPdCu Terminations...

Capacitor with AgPdCu Terminations...

Steve Gregory <[log in to unmask]>

Wed, 23 Sep 2015 08:11:08 -0600

56 lines

Re: Capacitor with AgPdCu Terminations...

David Hillman <[log in to unmask]>

Wed, 23 Sep 2015 10:04:27 -0500

86 lines

Re: Capacitor with AgPdCu Terminations...

Mike Fenner <[log in to unmask]>

Wed, 23 Sep 2015 20:38:34 +0100

113 lines

New Thread

Component solder reliability

Component solder reliability

Deng RongJun <[log in to unmask]>

Thu, 24 Sep 2015 07:30:33 +0000

25 lines

Re: Component solder reliability

Vladimir Igoshev <[log in to unmask]>

Thu, 24 Sep 2015 07:17:39 -0400

65 lines

Re: Component solder reliability

Francesco Di Maio <[log in to unmask]>

Thu, 24 Sep 2015 13:34:44 +0200

72 lines

Re: Component solder reliability

Bev Christian <[log in to unmask]>

Thu, 24 Sep 2015 20:49:25 -0400

75 lines

Re: Component solder reliability

Ken Harp <[log in to unmask]>

Thu, 24 Sep 2015 17:55:43 -0700

87 lines

Re: Component solder reliability

Deng RongJun <[log in to unmask]>

Fri, 25 Sep 2015 01:29:44 +0000

51 lines

Re: Component solder reliability

Vladimir Igoshev <[log in to unmask]>

Thu, 24 Sep 2015 21:49:37 -0400

115 lines

Re: Component solder reliability

Peter G. Houwen <[log in to unmask]>

Fri, 25 Sep 2015 07:17:15 -0500

24 lines

Re: Component solder reliability

Joyce Koo <[log in to unmask]>

Fri, 25 Sep 2015 09:30:24 -0400

37 lines

Re: Component solder reliability

Mike Fenner <[log in to unmask]>

Fri, 25 Sep 2015 23:08:47 +0100

59 lines

Re: Component solder reliability

Stadem, Richard D. <[log in to unmask]>

Sat, 26 Sep 2015 14:38:04 +0000

121 lines

Re: Component solder reliability

Stadem, Richard D. <[log in to unmask]>

Sat, 26 Sep 2015 14:45:57 +0000

69 lines

Re: Component solder reliability

Ken Harp <[log in to unmask]>

Sat, 26 Sep 2015 09:51:34 -0700

122 lines

Re: Component solder reliability

Peter G. Houwen <[log in to unmask]>

Mon, 28 Sep 2015 08:37:32 -0500

14 lines

Re: Component solder reliability

Mike Fenner <[log in to unmask]>

Mon, 28 Sep 2015 23:51:46 +0100

36 lines

Re: Component solder reliability

Ahne Oosterhof <[log in to unmask]>

Mon, 28 Sep 2015 20:59:01 -0700

56 lines

New Thread

Dumb vertical fill question...

Dumb vertical fill question...

Steve Gregory <[log in to unmask]>

Tue, 15 Sep 2015 17:30:03 -0600

34 lines

Re: Dumb vertical fill question...

Gregg Owens <[log in to unmask]>

Tue, 15 Sep 2015 16:37:39 -0700

43 lines

Re: Dumb vertical fill question...

Steve Gregory <[log in to unmask]>

Tue, 15 Sep 2015 18:13:10 -0600

78 lines

New Thread

Element Quiz Answer

Re: Element Quiz Answer

Olav Folland <[log in to unmask]>

Tue, 1 Sep 2015 21:19:12 -0700

199 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Wed, 2 Sep 2015 06:22:01 -0500

214 lines

Element Quiz Answer

David Hillman <[log in to unmask]>

Thu, 3 Sep 2015 13:52:40 -0500

186 lines

Re: Element Quiz Answer

Carroll, Thomas A <[log in to unmask]>

Thu, 3 Sep 2015 18:57:03 +0000

158 lines

Re: Element Quiz Answer

Leland Woodall <[log in to unmask]>

Thu, 3 Sep 2015 19:48:57 +0000

186 lines

Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 11 Sep 2015 14:04:17 -0500

222 lines

Re: Element Quiz Answer

Carroll, Thomas A <[log in to unmask]>

Fri, 11 Sep 2015 20:09:33 +0000

174 lines

Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 18 Sep 2015 13:18:34 -0500

176 lines

Re: Element Quiz Answer

Richard Krug <[log in to unmask]>

Fri, 18 Sep 2015 18:50:39 +0000

133 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 18 Sep 2015 14:22:09 -0500

178 lines

Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 11:52:14 -0500

189 lines

Re: Element Quiz Answer

Joe Russeau <[log in to unmask]>

Fri, 25 Sep 2015 13:44:36 -0400

244 lines

Re: Element Quiz Answer

Douglas Pauls <[log in to unmask]>

Fri, 25 Sep 2015 12:59:31 -0500

213 lines

Re: Element Quiz Answer

Douglas Pauls <[log in to unmask]>

Fri, 25 Sep 2015 13:00:18 -0500

281 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 13:06:07 -0500

276 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 13:11:44 -0500

234 lines

Re: Element Quiz Answer

Lamar Young <[log in to unmask]>

Fri, 25 Sep 2015 14:20:05 -0400

283 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 13:23:44 -0500

293 lines

Re: Element Quiz Answer

Lamar Young <[log in to unmask]>

Fri, 25 Sep 2015 15:09:43 -0400

360 lines

Re: Element Quiz Answer

Drew meyer <[log in to unmask]>

Fri, 25 Sep 2015 19:37:09 +0000

345 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 21:07:46 -0500

372 lines

Re: Element Quiz Answer

Brian Ellis <[log in to unmask]>

Sat, 26 Sep 2015 10:14:31 +0300

227 lines

Re: Element Quiz Answer

David Hillman <[log in to unmask]>

Sat, 26 Sep 2015 13:48:29 -0500

374 lines

New Thread

Element Quiz Question

Element Quiz Question

David Hillman <[log in to unmask]>

Thu, 3 Sep 2015 07:29:34 -0500

165 lines

Re: Element Quiz Question

Leland Woodall <[log in to unmask]>

Thu, 3 Sep 2015 12:31:04 +0000

125 lines

Re: Element Quiz Question

Carroll, Thomas A <[log in to unmask]>

Thu, 3 Sep 2015 12:34:40 +0000

132 lines

Re: Element Quiz Question

Douglas Pauls <[log in to unmask]>

Thu, 3 Sep 2015 08:41:41 -0500

268 lines

Re: Element Quiz Question

Matthias Mansfeld <[log in to unmask]>

Thu, 3 Sep 2015 16:04:42 +0200

170 lines

Re: Element Quiz Question

Ravinder Ajmani <[log in to unmask]>

Thu, 3 Sep 2015 16:02:26 +0000

198 lines

Re: Element Quiz Question

Russell Kido <[log in to unmask]>

Thu, 3 Sep 2015 16:20:08 +0000

189 lines

Re: Element Quiz Question

Stadem, Richard D. <[log in to unmask]>

Thu, 3 Sep 2015 16:29:25 +0000

203 lines

Element Quiz Question

David Hillman <[log in to unmask]>

Fri, 11 Sep 2015 07:39:45 -0500

197 lines

Re: Element Quiz Question

Jonathan Griffiths <[log in to unmask]>

Fri, 11 Sep 2015 13:42:01 +0100

80 lines

Re: Element Quiz Question

Carroll, Thomas A <[log in to unmask]>

Fri, 11 Sep 2015 12:54:23 +0000

152 lines

Re: Element Quiz Question

Joe Russeau <[log in to unmask]>

Fri, 11 Sep 2015 08:58:35 -0400

210 lines

Re: Element Quiz Question

Douglas Pauls <[log in to unmask]>

Fri, 11 Sep 2015 08:23:18 -0500

225 lines

Re: Element Quiz Question

David Hillman <[log in to unmask]>

Fri, 11 Sep 2015 08:40:24 -0500

249 lines

Re: Element Quiz Question

Leland Woodall <[log in to unmask]>

Fri, 11 Sep 2015 14:05:12 +0000

146 lines

Element Quiz Question

David Hillman <[log in to unmask]>

Thu, 17 Sep 2015 21:48:42 -0500

170 lines

Re: Element Quiz Question

Douglas Pauls <[log in to unmask]>

Thu, 17 Sep 2015 22:04:07 -0500

183 lines

Re: Element Quiz Question

Ken Harp <[log in to unmask]>

Thu, 17 Sep 2015 19:55:19 -0700

187 lines

Re: Element Quiz Question

Lawrence Dzaugis <[log in to unmask]>

Fri, 18 Sep 2015 00:26:46 -0400

117 lines

Re: Element Quiz Question

Stadem, Richard D. <[log in to unmask]>

Fri, 18 Sep 2015 12:17:36 +0000

118 lines

Re: Element Quiz Question

Robert e. welch <[log in to unmask]>

Fri, 18 Sep 2015 12:20:23 +0000

117 lines

Re: Element Quiz Question

Joyce Koo <[log in to unmask]>

Fri, 18 Sep 2015 08:41:55 -0400

182 lines

Re: Element Quiz Question

Bhanu Sood <[log in to unmask]>

Fri, 18 Sep 2015 11:24:15 -0400

204 lines

Re: Element Quiz Question

Richard Krug <[log in to unmask]>

Fri, 18 Sep 2015 15:52:16 +0000

120 lines

Element Quiz Question

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 07:00:01 -0500

170 lines

Re: Element Quiz Question

Leland Woodall <[log in to unmask]>

Fri, 25 Sep 2015 12:03:25 +0000

132 lines

Re: Element Quiz Question

James Head <[log in to unmask]>

Fri, 25 Sep 2015 12:14:09 +0000

25 lines

Re: Element Quiz Question

Douglas Pauls <[log in to unmask]>

Fri, 25 Sep 2015 07:47:36 -0500

249 lines

Re: Element Quiz Question

Ken Harp <[log in to unmask]>

Fri, 25 Sep 2015 06:54:09 -0700

190 lines

Re: Element Quiz Question

Bev Christian <[log in to unmask]>

Fri, 25 Sep 2015 12:46:08 -0400

227 lines

Re: Element Quiz Question

Bev Christian <[log in to unmask]>

Fri, 25 Sep 2015 12:47:15 -0400

230 lines

Re: Element Quiz Question

David Hillman <[log in to unmask]>

Fri, 25 Sep 2015 11:50:07 -0500

262 lines

Re: Element Quiz Question

Douglas Pauls <[log in to unmask]>

Fri, 25 Sep 2015 12:57:45 -0500

306 lines

Re: Element Quiz Question

Ed Popielarski <[log in to unmask]>

Fri, 25 Sep 2015 18:59:08 +0000

191 lines

New Thread

Element Quiz Status

Element Quiz Status

David Hillman <[log in to unmask]>

Fri, 18 Sep 2015 10:01:35 -0500

21 lines

Re: Element Quiz Status

Ed Popielarski <[log in to unmask]>

Fri, 18 Sep 2015 15:16:51 +0000

40 lines

Re: Element Quiz Status

Ravinder Ajmani <[log in to unmask]>

Fri, 18 Sep 2015 15:28:03 +0000

41 lines

Re: Element Quiz Status

William Coleman <[log in to unmask]>

Fri, 18 Sep 2015 16:04:10 +0000

32 lines

Re: Element Quiz Status

Keith Calhoun <[log in to unmask]>

Fri, 18 Sep 2015 12:36:08 -0400

54 lines

Re: Element Quiz Status

David Bealer <[log in to unmask]>

Fri, 18 Sep 2015 16:42:36 +0000

30 lines

Re: Element Quiz Status

Larry Dzaugis <[log in to unmask]>

Fri, 18 Sep 2015 14:08:26 -0400

58 lines

Re: Element Quiz Status

Greg Munie <[log in to unmask]>

Fri, 18 Sep 2015 18:34:18 +0000

25 lines

New Thread

ENEPIG Question?

ENEPIG Question?

Jenkins, Jeffrey A @ CSG - LINKABIT <[log in to unmask]>

Wed, 16 Sep 2015 16:01:53 +0000

25 lines

Re: ENEPIG Question?

Gumpert, Ben <[log in to unmask]>

Wed, 16 Sep 2015 17:00:57 +0000

38 lines

Re: ENEPIG Question?

Victor Hernandez <[log in to unmask]>

Wed, 16 Sep 2015 12:05:01 -0500

74 lines

Re: ENEPIG Question?

Stewart McCracken <[log in to unmask]>

Wed, 16 Sep 2015 18:29:35 +0100

88 lines

Re: ENEPIG Question?

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 13:30:34 -0400

92 lines

Re: ENEPIG Question?

Stewart McCracken <[log in to unmask]>

Wed, 16 Sep 2015 18:45:47 +0100

107 lines

Re: ENEPIG Question?

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 13:51:00 -0400

121 lines

Re: ENEPIG Question?

Stewart McCracken <[log in to unmask]>

Wed, 16 Sep 2015 18:53:55 +0100

134 lines

Re: ENEPIG Question?

Vladimir Igoshev <[log in to unmask]>

Wed, 16 Sep 2015 13:55:29 -0400

145 lines

Re: ENEPIG Question?

Stadem, Richard D. <[log in to unmask]>

Wed, 16 Sep 2015 17:58:58 +0000

113 lines

Re: ENEPIG Question?

Ed Popielarski <[log in to unmask]>

Wed, 16 Sep 2015 18:53:25 +0000

147 lines

Re: ENEPIG Question?

Leland Woodall <[log in to unmask]>

Wed, 16 Sep 2015 19:21:14 +0000

116 lines

Re: ENEPIG Question?

Stadem, Richard D. <[log in to unmask]>

Wed, 16 Sep 2015 20:32:17 +0000

126 lines

Re: ENEPIG Question?

David Hillman <[log in to unmask]>

Thu, 17 Sep 2015 07:44:54 -0500

70 lines

Re: ENEPIG Question?

Jenkins, Jeffrey A @ CSG - LINKABIT <[log in to unmask]>

Thu, 17 Sep 2015 15:32:52 +0000

77 lines

Re: ENEPIG Question?

Stadem, Richard D. <[log in to unmask]>

Thu, 17 Sep 2015 15:36:34 +0000

86 lines

New Thread

FW: Supported & Unsupported holes

FW: Supported & Unsupported holes

Victor Hernandez <[log in to unmask]>

Mon, 21 Sep 2015 14:29:42 -0500

38 lines

Re: FW: Supported & Unsupported holes

Steven Kelly <[log in to unmask]>

Mon, 21 Sep 2015 15:36:45 -0400

52 lines

New Thread

FW: [DC] PCB West TODAY!

FW: [DC] PCB West TODAY!

Mike Buetow <[log in to unmask]>

Wed, 16 Sep 2015 10:29:57 -0400

37 lines

New Thread

Land bond strength on rigid board

Land bond strength on rigid board

Deng RongJun <[log in to unmask]>

Mon, 28 Sep 2015 10:45:18 +0000

23 lines

Re: Land bond strength on rigid board

Chris Mahanna <[log in to unmask]>

Wed, 30 Sep 2015 16:05:32 +0000

42 lines

Re: Land bond strength on rigid board

Joyce Koo <[log in to unmask]>

Wed, 30 Sep 2015 13:13:50 -0400

75 lines

New Thread

laptop keyboard schematic

laptop keyboard schematic

Victor Hernandez <[log in to unmask]>

Tue, 1 Sep 2015 14:25:42 -0500

25 lines

Re: laptop keyboard schematic

Wayne Thayer <[log in to unmask]>

Tue, 1 Sep 2015 19:36:02 +0000

35 lines

Re: laptop keyboard schematic

Stadem, Richard D. <[log in to unmask]>

Tue, 1 Sep 2015 19:42:41 +0000

42 lines

Re: laptop keyboard schematic

Stadem, Richard D. <[log in to unmask]>

Tue, 1 Sep 2015 19:43:50 +0000

50 lines

New Thread

Magnification for Inspection of Cleanliness

Magnification for Inspection of Cleanliness

Richard Krug <[log in to unmask]>

Wed, 23 Sep 2015 14:23:24 +0000

33 lines

Re: Magnification for Inspection of Cleanliness

Stadem, Richard D. <[log in to unmask]>

Wed, 23 Sep 2015 15:29:51 +0000

58 lines

Re: Magnification for Inspection of Cleanliness

Joyce Koo <[log in to unmask]>

Wed, 23 Sep 2015 16:29:53 -0400

55 lines

New Thread

Master glass print for core circuitize

Master glass print for core circuitize

Victor Hernandez <[log in to unmask]>

Tue, 8 Sep 2015 08:40:02 -0500

26 lines

Re: Master glass print for core circuitize

Stadem, Richard D. <[log in to unmask]>

Tue, 8 Sep 2015 13:49:55 +0000

45 lines

Re: Master glass print for core circuitize

Stadem, Richard D. <[log in to unmask]>

Tue, 8 Sep 2015 13:58:03 +0000

47 lines

New Thread

Mil-E-917 and Impact on Component Leads

Mil-E-917 and Impact on Component Leads

Thierolf, Chris @ MPSG - SPD <[log in to unmask]>

Tue, 1 Sep 2015 15:48:06 +0000

70 lines

New Thread

NTC - personnel help

NTC - personnel help

Louis Hart <[log in to unmask]>

Thu, 24 Sep 2015 17:51:20 +0000

27 lines

New Thread

NTC Clumpy and Kloumpios

NTC Clumpy and Kloumpios

Richard Krug <[log in to unmask]>

Fri, 25 Sep 2015 11:53:42 +0000

31 lines

New Thread

NTC NTC NTC [TN] Element Quiz Answer

Re: NTC NTC NTC [TN] Element Quiz Answer

Stadem, Richard D. <[log in to unmask]>

Thu, 3 Sep 2015 20:09:11 +0000

168 lines

New Thread

Pick and Place Performance (Reject Rate)

Pick and Place Performance (Reject Rate)

Datacom - Juliano Ribeiro <[log in to unmask]>

Tue, 1 Sep 2015 16:05:10 -0300

56 lines

Re: Pick and Place Performance (Reject Rate)

Larry Dzaugis <[log in to unmask]>

Tue, 1 Sep 2015 16:53:23 -0400

98 lines

New Thread

PWB Core processing

PWB Core processing

Victor Hernandez <[log in to unmask]>

Fri, 4 Sep 2015 14:57:27 -0500

26 lines

New Thread

PWB/PCB misregistration,

PWB/PCB misregistration,

Victor Hernandez <[log in to unmask]>

Thu, 17 Sep 2015 11:26:21 -0500

38 lines

Re: PWB/PCB misregistration,

Louis Hart <[log in to unmask]>

Thu, 17 Sep 2015 19:51:22 +0000

62 lines

Re: PWB/PCB misregistration,

Ioan Tempea <[log in to unmask]>

Thu, 17 Sep 2015 19:55:14 +0000

77 lines

Re: PWB/PCB misregistration,

Victor Hernandez <[log in to unmask]>

Thu, 17 Sep 2015 15:09:00 -0500

91 lines

New Thread

PWB/PCH square punch die

PWB/PCH square punch die

Victor Hernandez <[log in to unmask]>

Tue, 22 Sep 2015 06:42:35 -0500

27 lines

Re: PWB/PCH square punch die

Steve Gregory <[log in to unmask]>

Tue, 22 Sep 2015 07:45:30 -0600

56 lines

New Thread

RES: [TN] Element Quiz Question

RES: [TN] Element Quiz Question

Datacom - Juliano Ribeiro <[log in to unmask]>

Fri, 18 Sep 2015 09:24:05 -0300

159 lines

RES: [TN] Element Quiz Question

Datacom - Juliano Ribeiro <[log in to unmask]>

Fri, 25 Sep 2015 09:11:51 -0300

160 lines

New Thread

RES: [TN] Pick and Place Performance (Reject Rate)

RES: [TN] Pick and Place Performance (Reject Rate)

Datacom - Juliano Ribeiro <[log in to unmask]>

Wed, 2 Sep 2015 09:08:33 -0300

151 lines

Re: RES: [TN] Pick and Place Performance (Reject Rate)

Steve Gregory <[log in to unmask]>

Wed, 2 Sep 2015 09:50:50 -0600

194 lines

Re: RES: [TN] Pick and Place Performance (Reject Rate)

Stadem, Richard D. <[log in to unmask]>

Wed, 2 Sep 2015 16:27:34 +0000

103 lines

New Thread

Selective Conformal Coat Systems

Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 09:39:02 -0500

21 lines

Re: Selective Conformal Coat Systems

lduso - Diamond-MT.com <[log in to unmask]>

Thu, 3 Sep 2015 10:41:08 -0400

40 lines

Re: Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 10:43:23 -0400

54 lines

Re: Selective Conformal Coat Systems

Stephen Gregory <[log in to unmask]>

Thu, 3 Sep 2015 08:48:37 -0600

113 lines

Re: Selective Conformal Coat Systems

lduso - Diamond-MT.com <[log in to unmask]>

Thu, 3 Sep 2015 10:55:38 -0400

115 lines

Re: Selective Conformal Coat Systems

Douglas Pauls <[log in to unmask]>

Thu, 3 Sep 2015 10:00:32 -0500

149 lines

Re: Selective Conformal Coat Systems

Lee Hitchens <[log in to unmask]>

Thu, 3 Sep 2015 16:08:02 +0100

151 lines

Re: Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 11:23:38 -0400

108 lines

Re: Selective Conformal Coat Systems

Lee Hitchens <[log in to unmask]>

Thu, 3 Sep 2015 16:42:14 +0100

277 lines

Re: Selective Conformal Coat Systems

Steve Gregory <[log in to unmask]>

Thu, 3 Sep 2015 09:51:20 -0600

246 lines

Re: Selective Conformal Coat Systems

lduso - Diamond-MT.com <[log in to unmask]>

Thu, 3 Sep 2015 12:30:11 -0400

236 lines

Re: Selective Conformal Coat Systems

Steve Gregory <[log in to unmask]>

Thu, 3 Sep 2015 10:35:15 -0600

283 lines

Re: Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 12:45:07 -0400

183 lines

Re: Selective Conformal Coat Systems

Douglas Pauls <[log in to unmask]>

Thu, 3 Sep 2015 11:50:00 -0500

330 lines

Re: Selective Conformal Coat Systems

Steve Gregory <[log in to unmask]>

Thu, 3 Sep 2015 10:49:56 -0600

366 lines

Re: Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 12:49:38 -0400

312 lines

Re: Selective Conformal Coat Systems

Joyce Koo <[log in to unmask]>

Thu, 3 Sep 2015 13:04:25 -0400

335 lines

Re: Selective Conformal Coat Systems

lduso - Diamond-MT.com <[log in to unmask]>

Thu, 3 Sep 2015 13:50:18 -0400

364 lines

Re: Selective Conformal Coat Systems

Robert Kondner <[log in to unmask]>

Thu, 3 Sep 2015 13:51:23 -0400

341 lines

Re: Selective Conformal Coat Systems

Ioan Tempea <[log in to unmask]>

Thu, 3 Sep 2015 19:57:52 +0000

61 lines

Re: Selective Conformal Coat Systems

Adrian Dimulescu <[log in to unmask]>

Thu, 3 Sep 2015 16:29:16 -0400

89 lines

Re: Selective Conformal Coat Systems

Lee Hitchens <[log in to unmask]>

Fri, 4 Sep 2015 07:27:10 +0100

143 lines

New Thread

Solder paste print thickness vs reflowed thickness for SMT packages

Solder paste print thickness vs reflowed thickness for SMT packages

Mumtaz Bora <[log in to unmask]>

Tue, 15 Sep 2015 17:52:51 +0000

37 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Leland Woodall <[log in to unmask]>

Tue, 15 Sep 2015 18:30:42 +0000

68 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Mumtaz Bora <[log in to unmask]>

Tue, 15 Sep 2015 18:37:29 +0000

83 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Larry Dzaugis <[log in to unmask]>

Tue, 15 Sep 2015 16:15:19 -0400

53 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Joyce Koo <[log in to unmask]>

Tue, 15 Sep 2015 17:16:53 -0400

55 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Mumtaz Bora <[log in to unmask]>

Tue, 15 Sep 2015 21:18:47 +0000

84 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Tony Lentz <[log in to unmask]>

Tue, 15 Sep 2015 21:23:18 +0000

71 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Tan Geok Ang <[log in to unmask]>

Tue, 15 Sep 2015 22:21:26 +0000

98 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Stadem, Richard D. <[log in to unmask]>

Wed, 16 Sep 2015 12:21:55 +0000

86 lines

Re: Solder paste print thickness vs reflowed thickness for SMT packages

Mumtaz Bora <[log in to unmask]>

Wed, 16 Sep 2015 16:18:13 +0000

115 lines

New Thread

Solder paste print thickness vs. reflowed thickness for SMT packages

Re: Solder paste print thickness vs. reflowed thickness for SMT packages

Mike Fenner <[log in to unmask]>

Wed, 16 Sep 2015 17:08:32 +0100

85 lines

Re: Solder paste print thickness vs. reflowed thickness for SMT packages

Mumtaz Bora <[log in to unmask]>

Wed, 16 Sep 2015 16:13:44 +0000

120 lines

New Thread

Supported & Unsupported holes

Supported & Unsupported holes

Victor Hernandez <[log in to unmask]>

Fri, 18 Sep 2015 09:13:37 -0500

27 lines

Re: Supported & Unsupported holes

McGlaughlin, Jeffrey A <[log in to unmask]>

Mon, 21 Sep 2015 19:45:38 +0000

79 lines

Re: Supported & Unsupported holes

Brian Ellis <[log in to unmask]>

Tue, 22 Sep 2015 09:37:40 +0300

76 lines

Re: Supported & Unsupported holes

Victor Hernandez <[log in to unmask]>

Tue, 22 Sep 2015 06:18:01 -0500

110 lines

New Thread

TechNet Digest - 11 Sep 2015 to 14 Sep 2015 (#2015-173)

Re: TechNet Digest - 11 Sep 2015 to 14 Sep 2015 (#2015-173)

Evans, Jack <[log in to unmask]>

Tue, 15 Sep 2015 15:06:51 +0000

374 lines

New Thread

Textured Solder?

Re: Textured Solder?

Mike Fenner <[log in to unmask]>

Tue, 1 Sep 2015 13:26:58 +0100

195 lines

Re: Textured Solder?

Stadem, Richard D. <[log in to unmask]>

Tue, 1 Sep 2015 13:36:30 +0000

225 lines

Re: Textured Solder?

Richard Krug <[log in to unmask]>

Fri, 4 Sep 2015 11:54:14 +0000

253 lines

New Thread

Water soluble masking materials

Water soluble masking materials

Douglas Pauls <[log in to unmask]>

Tue, 15 Sep 2015 11:39:16 -0500

24 lines

Re: Water soluble masking materials

Wayne Thayer <[log in to unmask]>

Tue, 15 Sep 2015 17:00:03 +0000

33 lines

Re: Water soluble masking materials

Steve Gregory <[log in to unmask]>

Tue, 15 Sep 2015 11:40:07 -0600

56 lines

New Thread

Water soluble masking materials - Bayesian Filter detected spam

Re: Water soluble masking materials - Bayesian Filter detected spam

Bush, Brien <[log in to unmask]>

Tue, 15 Sep 2015 17:03:50 +0000

48 lines

New Thread

Why Dad Why? Ampacity Degradation Reasoning in A610/20

Why Dad Why? Ampacity Degradation Reasoning in A610/20

Bob Wettermann <[log in to unmask]>

Fri, 11 Sep 2015 13:16:20 -0500

50 lines

Re: Why Dad Why? Ampacity Degradation Reasoning in A610/20

Giamis, Andy <[log in to unmask]>

Fri, 11 Sep 2015 19:10:42 +0000

55 lines

Re: Why Dad Why? Ampacity Degradation Reasoning in A610/20

Bob Wettermann <[log in to unmask]>

Fri, 11 Sep 2015 14:51:06 -0500

90 lines

Re: Why Dad Why? Ampacity Degradation Reasoning in A610/20

Yuan-chia Joyce Koo <[log in to unmask]>

Fri, 11 Sep 2015 20:16:16 -0400

81 lines

New Thread

[NTC -TN] Element Quiz Answer

Re: [NTC -TN] Element Quiz Answer

Dennis Fritz <[log in to unmask]>

Fri, 25 Sep 2015 17:26:43 -0400

417 lines

Re: [NTC -TN] Element Quiz Answer

Stadem, Richard D. <[log in to unmask]>

Sat, 26 Sep 2015 15:45:01 +0000

228 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager