LISTSERV 16.0 - TECHNET Archives

Steve Gregory <[log in to unmask]>

Wed, 17 Jun 2015 09:41:08 -0600

75 lines

Wayne Thayer <[log in to unmask]>

Wed, 17 Jun 2015 14:45:47 +0000

50 lines

Ed Popielarski <[log in to unmask]>

Wed, 17 Jun 2015 16:39:41 +0000

84 lines

Mumtaz Bora <[log in to unmask]>

Wed, 17 Jun 2015 16:57:28 +0000

103 lines

Blue PCB material

Lehmicke, Michael <[log in to unmask]>

Tue, 30 Jun 2015 16:13:58 +0000

63 lines

Victor Hernandez <[log in to unmask]>

Tue, 30 Jun 2015 11:26:37 -0500

77 lines

Steve Gregory <[log in to unmask]>

Tue, 30 Jun 2015 10:29:36 -0600

92 lines

Lehmicke, Michael <[log in to unmask]>

Tue, 30 Jun 2015 16:42:40 +0000

128 lines

Lehmicke, Michael <[log in to unmask]>

Tue, 30 Jun 2015 17:08:18 +0000

77 lines

Delay test. 7

V M <[log in to unmask]>

Thu, 4 Jun 2015 10:27:30 -0500

20 lines

Stadem, Richard D. <[log in to unmask]>

Thu, 4 Jun 2015 15:45:30 +0000

37 lines

Douglas Pauls <[log in to unmask]>

Thu, 4 Jun 2015 11:22:27 -0500

37 lines

Douglas Pauls <[log in to unmask]>

Thu, 4 Jun 2015 11:22:53 -0500

52 lines

Vadim Matveyev <[log in to unmask]>

Thu, 4 Jun 2015 16:24:51 +0000

33 lines

electrical conductor spacing

Steve Gregory <[log in to unmask]>

Fri, 5 Jun 2015 10:16:16 -0600

45 lines

Torsten Hagge <[log in to unmask]>

Tue, 30 Jun 2015 09:28:52 +0000

43 lines

Element Quiz Answer

David Hillman <[log in to unmask]>

Mon, 15 Jun 2015 08:24:07 -0500

174 lines

Re: Element Quiz Answer

Carroll, Thomas A <[log in to unmask]>

Mon, 15 Jun 2015 14:01:23 +0000

156 lines

Element Quiz Question

David Hillman <[log in to unmask]>

Fri, 12 Jun 2015 11:04:47 -0500

170 lines

Carroll, Thomas A <[log in to unmask]>

Fri, 12 Jun 2015 16:10:13 +0000

143 lines

Robert e. welch <[log in to unmask]>

Fri, 12 Jun 2015 16:10:27 +0000

124 lines

Robert e. welch <[log in to unmask]>

Fri, 12 Jun 2015 16:13:44 +0000

134 lines

Patrick Goodyear <[log in to unmask]>

Fri, 12 Jun 2015 12:17:25 -0400

200 lines

Chuck Brummer <[log in to unmask]>

Fri, 12 Jun 2015 09:29:16 -0700

214 lines

Mike Fenner <[log in to unmask]>

Fri, 12 Jun 2015 20:24:43 +0100

198 lines

Flying Probe Test Service

David Hillman <[log in to unmask]>

Mon, 15 Jun 2015 08:42:07 -0500

223 lines

Steve Gregory <[log in to unmask]>

Wed, 17 Jun 2015 09:50:30 -0600

38 lines

Ed Popielarski <[log in to unmask]>

Wed, 17 Jun 2015 16:40:56 +0000

52 lines

May, William D (Dean) CIV NSWC Crane, GXSP <[log in to unmask]>

Wed, 17 Jun 2015 16:51:10 +0000

64 lines

Steve Gregory <[log in to unmask]>

Wed, 17 Jun 2015 10:49:01 -0600

109 lines

IPC APEX EXPO 2016 -- Call for Papers

Ed Popielarski <[log in to unmask]>

Wed, 17 Jun 2015 16:51:04 +0000

82 lines

Sandy Gentry <[log in to unmask]>

Mon, 8 Jun 2015 11:04:50 -0500

126 lines

minimum flex bend radius

Byrd, Bill J <[log in to unmask]>

Tue, 2 Jun 2015 17:33:46 +0000

27 lines

Re: minimum flex bend radius

Gumpert, Ben <[log in to unmask]>

Tue, 2 Jun 2015 19:20:56 +0000

49 lines

NTC Element Quiz Answer

David Hillman <[log in to unmask]>

Mon, 8 Jun 2015 07:50:04 -0500

176 lines

Re: NTC Element Quiz Answer

Steve Gregory <[log in to unmask]>

Tue, 9 Jun 2015 11:17:34 -0600

211 lines

NTC Element Quiz Answer

David Hillman <[log in to unmask]>

Fri, 19 Jun 2015 14:11:01 -0500

187 lines

NTC Element Quiz Answer

David Hillman <[log in to unmask]>

Mon, 29 Jun 2015 07:50:30 -0500

178 lines

Re: NTC Element Quiz Answer

Mordechai Kirshenbaum <[log in to unmask]>

Mon, 29 Jun 2015 14:59:15 +0000

215 lines

Re: NTC Element Quiz Answer

David Hillman <[log in to unmask]>

Mon, 29 Jun 2015 10:16:12 -0500

217 lines

NTC Element Quiz Question

David Hillman <[log in to unmask]>

Thu, 4 Jun 2015 16:49:50 -0500

164 lines

Joyce Koo <[log in to unmask]>

Fri, 5 Jun 2015 23:09:14 -0400

182 lines

Steve Gregory <[log in to unmask]>

Fri, 5 Jun 2015 19:08:07 -0600

192 lines

Lawrence Dzaugis <[log in to unmask]>

Fri, 5 Jun 2015 21:06:28 -0400

121 lines

NTC Element Quiz Question

Mike Fenner <[log in to unmask]>

Sat, 6 Jun 2015 20:37:48 +0100

214 lines

David Hillman <[log in to unmask]>

Fri, 19 Jun 2015 09:12:35 -0500

178 lines

Tony Lentz <[log in to unmask]>

Fri, 19 Jun 2015 14:22:31 +0000

134 lines

Robert e. welch <[log in to unmask]>

Fri, 19 Jun 2015 14:25:40 +0000

133 lines

Lamar Young <[log in to unmask]>

Fri, 19 Jun 2015 10:21:24 -0400

213 lines

Carroll, Thomas A <[log in to unmask]>

Fri, 19 Jun 2015 14:26:27 +0000

151 lines

Graham Collins <[log in to unmask]>

Fri, 19 Jun 2015 11:26:31 -0300

199 lines

Matthias Mansfeld <[log in to unmask]>

Fri, 19 Jun 2015 16:37:37 +0200

51 lines

Mumtaz Bora <[log in to unmask]>

Fri, 19 Jun 2015 16:59:36 +0000

143 lines

Stadem, Richard D. <[log in to unmask]>

Mon, 22 Jun 2015 13:52:22 +0000

185 lines

Douglas Pauls <[log in to unmask]>

Mon, 22 Jun 2015 08:57:28 -0500

201 lines

NTC Element Quiz Question

Tony Lentz <[log in to unmask]>

Mon, 22 Jun 2015 14:13:31 +0000

202 lines

David Hillman <[log in to unmask]>

Thu, 25 Jun 2015 13:19:50 -0500

172 lines

Leland Woodall <[log in to unmask]>

Thu, 25 Jun 2015 18:21:07 +0000

138 lines

Mumtaz Bora <[log in to unmask]>

Thu, 25 Jun 2015 18:26:28 +0000

137 lines

Steve Mikell <[log in to unmask]>

Thu, 25 Jun 2015 23:15:36 +0200

35 lines

NTC The USA on notice

Brian Ellis <[log in to unmask]>

Thu, 25 Jun 2015 12:04:10 +0300

160 lines

Joyce Koo <[log in to unmask]>

Thu, 25 Jun 2015 08:37:13 -0400

170 lines

James Head <[log in to unmask]>

Thu, 25 Jun 2015 12:44:47 +0000

25 lines

Douglas Pauls <[log in to unmask]>

Thu, 25 Jun 2015 07:48:53 -0500

178 lines

Steve Smith <[log in to unmask]>

Thu, 25 Jun 2015 14:17:29 +0000

146 lines

Stadem, Richard D. <[log in to unmask]>

Thu, 25 Jun 2015 18:58:38 +0000

158 lines

Douglas Pauls <[log in to unmask]>

Thu, 25 Jun 2015 14:02:45 -0500

226 lines

Stadem, Richard D. <[log in to unmask]>

Thu, 25 Jun 2015 19:10:30 +0000

175 lines

Stadem, Richard D. <[log in to unmask]>

Thu, 25 Jun 2015 19:12:35 +0000

185 lines

Graham Naisbitt <[log in to unmask]>

Fri, 26 Jun 2015 11:56:50 +0100

310 lines

James Head <[log in to unmask]>

Fri, 26 Jun 2015 11:13:58 +0000

26 lines

Joyce Koo <[log in to unmask]>

Fri, 26 Jun 2015 08:29:03 -0400

36 lines

Graham Naisbitt <[log in to unmask]>

Fri, 26 Jun 2015 13:38:44 +0100

53 lines

Stadem, Richard D. <[log in to unmask]>

Mon, 29 Jun 2015 14:25:24 +0000

290 lines

Richard Kraszewski <[log in to unmask]>

Mon, 29 Jun 2015 23:53:35 +0000

132 lines

James Head <[log in to unmask]>

Tue, 30 Jun 2015 08:03:57 +0000

30 lines

oxidation/corrosion attack

Stadem, Richard D. <[log in to unmask]>

Tue, 30 Jun 2015 12:41:18 +0000

40 lines

Victor Hernandez <[log in to unmask]>

Tue, 2 Jun 2015 14:03:52 -0500

26 lines

Re: oxidation/corrosion attack

Stadem, Richard D. <[log in to unmask]>

Wed, 3 Jun 2015 18:50:44 +0000

60 lines

Re: oxidation/corrosion attack

David Hillman <[log in to unmask]>

Wed, 3 Jun 2015 16:07:20 -0500

46 lines

PCB blob defect

Watson, Howard August <[log in to unmask]>

Tue, 2 Jun 2015 19:23:01 +0000

33 lines

Theodore J Tontis <[log in to unmask]>

Tue, 2 Jun 2015 23:09:06 +0000

52 lines

Vladimir Igoshev <[log in to unmask]>

Tue, 2 Jun 2015 19:09:30 -0400

55 lines

Joyce Koo <[log in to unmask]>

Wed, 3 Jun 2015 12:07:05 -0400

42 lines

Joel Peiffer <[log in to unmask]>

Wed, 3 Jun 2015 16:30:08 +0000

67 lines

Robert e. welch <[log in to unmask]>

Wed, 3 Jun 2015 16:30:44 +0000

59 lines

Wayne Thayer <[log in to unmask]>

Wed, 3 Jun 2015 10:29:38 +0000

83 lines

Louis Hart <[log in to unmask]>

Tue, 2 Jun 2015 23:46:39 +0000

71 lines

Wayne Thayer <[log in to unmask]>

Wed, 3 Jun 2015 16:46:25 +0000

79 lines

Theodore J Tontis <[log in to unmask]>

Wed, 3 Jun 2015 17:15:05 +0000

108 lines

Watson, Howard August <[log in to unmask]>

Wed, 3 Jun 2015 19:41:00 +0000

91 lines

Louis Hart <[log in to unmask]>

Thu, 4 Jun 2015 12:39:16 +0000

60 lines

James <[log in to unmask]>

Thu, 4 Jun 2015 15:34:27 +0000

53 lines

James <[log in to unmask]>

Thu, 4 Jun 2015 17:17:53 +0000

78 lines

Watson, Howard August <[log in to unmask]>

Thu, 4 Jun 2015 17:03:38 +0000

64 lines

PCB Fabrication house with Embedded Discrete Component Capability

Joyce Koo <[log in to unmask]>

Thu, 4 Jun 2015 14:58:02 -0400

146 lines

Tan Geok Ang <[log in to unmask]>

Tue, 30 Jun 2015 14:13:24 +0000

24 lines

Re: PCB Fabrication house with Embedded Discrete Component Capability

Wayne Thayer <[log in to unmask]>

Tue, 30 Jun 2015 17:02:14 +0000

56 lines

Re: PCB Fabrication house with Embedded Discrete Component Capability

Joel Peiffer <[log in to unmask]>

Tue, 30 Jun 2015 20:08:14 +0000

87 lines

Re: PCB Fabrication house with Embedded Discrete Component Capability

Stadem, Richard D. <[log in to unmask]>

Tue, 30 Jun 2015 20:31:46 +0000

120 lines

PCB Fabrication house with Embedded DiscreteComponentCapability

Re: PCB Fabrication house with Embedded DiscreteComponentCapability

Joel Peiffer <[log in to unmask]>

Tue, 30 Jun 2015 21:30:36 +0000

142 lines

Re: PCB Fabrication house with Embedded DiscreteComponentCapability

Tan Geok Ang <[log in to unmask]>

Wed, 1 Jul 2015 00:16:53 +0000

161 lines

PCB High Voltage Soldering Requirements?

Steve Gregory <[log in to unmask]>

Fri, 5 Jun 2015 09:55:45 -0600

68 lines

stephen gregory <[log in to unmask]>

Sat, 6 Jun 2015 01:29:41 +0000

118 lines

Ahne Oosterhof <[log in to unmask]>

Fri, 5 Jun 2015 21:37:41 -0700

127 lines

Carl VanWormer <[log in to unmask]>

Mon, 8 Jun 2015 13:23:19 +0000

94 lines

Nutting, Phil <[log in to unmask]>

Mon, 8 Jun 2015 13:57:24 +0000

77 lines

Wayne Thayer <[log in to unmask]>

Mon, 8 Jun 2015 11:29:51 +0000

124 lines

Programmable hoist

Douglas Pauls <[log in to unmask]>

Tue, 9 Jun 2015 09:00:03 -0500

29 lines

Stadem, Richard D. <[log in to unmask]>

Tue, 9 Jun 2015 14:09:17 +0000

37 lines

Douglas Pauls <[log in to unmask]>

Tue, 9 Jun 2015 09:13:16 -0500

58 lines

Douglas Pauls <[log in to unmask]>

Tue, 9 Jun 2015 09:45:26 -0500

96 lines

lduso - Diamond-MT.com <[log in to unmask]>

Tue, 9 Jun 2015 10:19:25 -0400

81 lines

Protecting Pick and Place, Ovens, Printers and AOI Systems

Stadem, Richard D. <[log in to unmask]>

Tue, 9 Jun 2015 14:23:00 +0000

47 lines

Bob Wettermann <[log in to unmask]>

Fri, 5 Jun 2015 09:08:26 -0500

42 lines

Re: Protecting Pick and Place, Ovens, Printers and AOI Systems

Joyce Koo <[log in to unmask]>

Fri, 5 Jun 2015 23:12:56 -0400

60 lines

Re: Protecting Pick and Place, Ovens, Printers and AOI Systems

Ahne Oosterhof <[log in to unmask]>

Fri, 5 Jun 2015 21:57:35 -0700

77 lines

Re: Protecting Pick and Place, Ovens, Printers and AOI Systems

Wayne Thayer <[log in to unmask]>

Mon, 8 Jun 2015 11:41:50 +0000

66 lines

Simple Question (I think )

Richard Kraszewski <[log in to unmask]>

Mon, 8 Jun 2015 21:27:32 +0000

25 lines

Jason Zhao <[log in to unmask]>

Tue, 9 Jun 2015 16:12:28 -0500

75 lines

Stadem, Richard D. <[log in to unmask]>

Tue, 9 Jun 2015 22:16:01 +0000

92 lines

Mike Fenner <[log in to unmask]>

Wed, 10 Jun 2015 20:38:58 +0100

65 lines

Richard Kraszewski <[log in to unmask]>

Wed, 10 Jun 2015 20:54:39 +0000

87 lines

Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Graham Naisbitt <[log in to unmask]>

Fri, 12 Jun 2015 14:37:41 +0100

90 lines

Ricardo Moncaglieri <[log in to unmask]>

Tue, 2 Jun 2015 18:17:45 -0300

31 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

David Hillman <[log in to unmask]>

Wed, 3 Jun 2015 15:25:30 -0500

56 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Mike Fenner <[log in to unmask]>

Wed, 3 Jun 2015 21:41:07 +0100

69 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Wayne Thayer <[log in to unmask]>

Wed, 3 Jun 2015 20:51:08 +0000

85 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Joyce Koo <[log in to unmask]>

Wed, 3 Jun 2015 19:38:08 -0400

89 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Ricardo Moncaglieri <[log in to unmask]>

Thu, 4 Jun 2015 08:24:28 -0300

106 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Ricardo Moncaglieri <[log in to unmask]>

Thu, 4 Jun 2015 17:04:53 -0300

117 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Wayne Thayer <[log in to unmask]>

Thu, 4 Jun 2015 20:11:56 +0000

121 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Wayne Thayer <[log in to unmask]>

Thu, 4 Jun 2015 13:34:53 +0000

114 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Mike Fenner <[log in to unmask]>

Sat, 6 Jun 2015 21:33:30 +0100

189 lines

Re: Solder Alloy SnIn - Working Environmental Conditions: -100°C to +100°C

Mike Fenner <[log in to unmask]>

Mon, 8 Jun 2015 22:00:22 +0100

219 lines

Solder Paste ambient temperature and humidity

Avni Selim Özçukurlu <[log in to unmask]>

Mon, 15 Jun 2015 11:53:58 +0300

56 lines

Solder Paste ambient temperature and humidity

Avni Selim Özçukurlu <[log in to unmask]>

Mon, 15 Jun 2015 16:23:58 +0300

65 lines

Re: Solder Paste ambient temperature and humidity

Guy Ramsey <[log in to unmask]>

Mon, 15 Jun 2015 09:54:15 -0400

82 lines

Re: Solder Paste ambient temperature and humidity

Stadem, Richard D. <[log in to unmask]>

Mon, 15 Jun 2015 15:53:54 +0000

92 lines

Re: Solder Paste ambient temperature and humidity

Mike Fenner <[log in to unmask]>

Mon, 15 Jun 2015 19:40:58 +0100

104 lines

Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Bob Wettermann <[log in to unmask]>

Mon, 29 Jun 2015 11:25:17 -0500

30 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Steve Gregory <[log in to unmask]>

Mon, 29 Jun 2015 12:43:15 -0600

65 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Roger Mack <[log in to unmask]>

Mon, 29 Jun 2015 14:06:48 -0500

122 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Roger Mack <[log in to unmask]>

Mon, 29 Jun 2015 14:33:31 -0500

165 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Joyce Koo <[log in to unmask]>

Mon, 29 Jun 2015 16:53:31 -0400

90 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

Joyce Koo <[log in to unmask]>

Mon, 29 Jun 2015 16:59:39 -0400

103 lines

Re: Solder Paste Dipping Ultra Fine Pitch QFPs for Reork?

David Hillman <[log in to unmask]>

Mon, 29 Jun 2015 16:27:25 -0500

50 lines

Solder Paste Question

Leland Woodall <[log in to unmask]>

Fri, 5 Jun 2015 17:05:58 +0000

35 lines

Lawrence Dzaugis <[log in to unmask]>

Fri, 5 Jun 2015 21:10:24 -0400

44 lines

Mike Fenner <[log in to unmask]>

Sat, 6 Jun 2015 21:32:53 +0100

86 lines

Tony Lentz <[log in to unmask]>

Mon, 8 Jun 2015 15:44:16 +0000

60 lines

Stadem, Richard D. <[log in to unmask]>

Mon, 8 Jun 2015 13:42:50 +0000

79 lines

Richard Kraszewski <[log in to unmask]>

Mon, 8 Jun 2015 16:48:31 +0000

54 lines

Solderability Dip Testing Device

Joyce Koo <[log in to unmask]>

Mon, 8 Jun 2015 21:16:51 -0400

121 lines

Re: Solderability Dip Testing Device

David Hillman <[log in to unmask]>

Wed, 3 Jun 2015 11:03:35 -0500

60 lines

Test

V M <[log in to unmask]>

Wed, 3 Jun 2015 16:00:03 -0500

18 lines

Transformers and Toroid's

Re: Transformers and Toroid's

Victor Hernandez <[log in to unmask]>

Wed, 3 Jun 2015 12:06:15 -0500

80 lines

Transformers and Toroids

Douglas Pauls <[log in to unmask]>

Tue, 2 Jun 2015 11:36:24 -0500

28 lines

Joyce Koo <[log in to unmask]>

Wed, 3 Jun 2015 12:20:55 -0400

43 lines

Douglas Pauls <[log in to unmask]>

Wed, 3 Jun 2015 11:59:56 -0500

61 lines

Ed Popielarski <[log in to unmask]>

Wed, 3 Jun 2015 17:30:12 +0000

64 lines

Stadem, Richard D. <[log in to unmask]>

Wed, 3 Jun 2015 17:58:56 +0000

57 lines

Douglas Pauls <[log in to unmask]>

Wed, 3 Jun 2015 14:25:13 -0500

92 lines

David Hillman <[log in to unmask]>

Wed, 3 Jun 2015 14:26:46 -0500

113 lines

Victor Hernandez <[log in to unmask]>

Wed, 3 Jun 2015 14:28:47 -0500

132 lines