LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


July 2011


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

30mm*30mm LGA populated on network equipment, ok? (1 message)
7525 anything new in the pipe line? (5 messages)
Acceleration Factors for Thermal Cycling (4 messages)
Aluminum Electrolytic Capacitor Bungs (2 messages)
AW: [TN] High Vacuum Substrate (1 message)
AW: [TN] Missing PTH Barrels in Connector (5 messages)
AW: [TN] NTC Friday Element Quiz - the Question (1 message)
BGA ball dewet from substrate (10 messages)
BGA Repair Methods (10 messages)
Black Pad? (1 message)
Breakaway help (9 messages)
Capacitor Crack (7 messages)
Castellated Hole Acceptability (2 messages)
Ceramic Resistor Fabrication (1 message)
CF-8 Component Prep Machine (1 message)
Data Transfer Databases (1 message)
Destruction of PCAs and PCBs (3 messages)
Developing Operator box assembly work instructions from SolidWorks files (1 message)
ENiG causing galvanic corrosion? (6 messages)
EXTERNAL: Re: [TN] glue for part addition (2 messages)
Fab defects - process or mechanical? (4 messages)
Finishing Quality (1 message)
FW: Thin Film Ceramic Resistor, 51K, serpentine (2 messages)
FW: [TN] IPC-A-610 Conformal Coating - Coverage (2 messages)
glue for part addition (2 messages)
hard gold verification (7 messages)
High Vacuum Substrate (9 messages)
I'm back (NTC) (10 messages)
Insertion problem with taped through hole radial Leds (1 message)
Ionic contamination problems (6 messages)
IPC-A-600 CERTIFICATION (10 messages)
IPC-A-610 Conformal Coating - Coverage (11 messages)
IPC-A-610 Conformal Coating - Coverage (re-visit) (1 message)
isolation (1 message)
J-STD-001E 5.5 and IPC-A-620A 4.9 Terminal Soldering (2 messages)
Lead Free solder has performed well... (47 messages)
Lead-free leg (1 message)
Leaded or non (22 messages)
likelihood of soic-8 package breach (4 messages)
Looking for wire solder (2 messages)
Micro voids when soldering to hard gold (6 messages)
Missing PTH Barrels in Connector (8 messages)
New Hand Soldering Competition at IPC Midwest Conference and Exhibition (1 message)
NTC Friday Element Quiz - the Answer (20 messages)
NTC Friday Element Quiz - the Question (44 messages)
PCB dielectric - 2 layers prepreg (1 message)
Poor gold plating, any solution to help soldering (5 messages)
Pre-preg (2 messages)
Query on Plasma Desmearing (4 messages)
Requirement to PTH Mount Power Resistors Above PWB Surface (6 messages)
Rework from cut and jump (2 messages)
Select solder process development (1 message)
Silver embrittelment in solder joints (7 messages)
Solderpaste Storage and Use (9 messages)
Stepped stencils - Is there a limit? (4 messages)
Surface Finish for Breath (7 messages)
Test LABS that Perform Surface Tension Measurements on Liquids (2 messages)
Thin Film Ceramic Resistor, 51K, serpentine (1 message)
To all stencils expert out there (1 message)
Wire Twists per inch (3 messages)
Wire Twists per inch (clause 3.4 of A-620A) (1 message)
[Norton AntiSpam]Re: [TN] Stepped stencils - Is there a limit? (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

30mm*30mm LGA populated on network equipment, ok?

30mm*30mm LGA populated on network equipment, ok?

Charming Chan

Mon, 25 Jul 2011 11:27:28 -0400

41 lines

New Thread

7525 anything new in the pipe line?

Re: 7525 anything new in the pipe line?

Jack Olson

Fri, 22 Jul 2011 08:54:23 -0500

26 lines

Re: 7525 anything new in the pipe line?

Jack Olson

Fri, 22 Jul 2011 08:52:00 -0500

33 lines

Re: 7525 anything new in the pipe line?

Joyce Koo

Thu, 21 Jul 2011 18:06:23 -0400

109 lines

Re: 7525 anything new in the pipe line?

Jack Crawford

Thu, 21 Jul 2011 16:43:26 -0500

80 lines

7525 anything new in the pipe line?

Joyce Koo

Thu, 21 Jul 2011 17:06:05 -0400

43 lines

New Thread

Acceleration Factors for Thermal Cycling

Re: Acceleration Factors for Thermal Cycling

Paul Reid

Tue, 12 Jul 2011 07:42:56 -0400

112 lines

Re: Acceleration Factors for Thermal Cycling

Ivan Feng

Thu, 7 Jul 2011 21:27:55 -0400

79 lines

Re: Acceleration Factors for Thermal Cycling

Paul Reid

Thu, 7 Jul 2011 20:16:28 -0400

50 lines

Acceleration Factors for Thermal Cycling

Paul Reid

Fri, 1 Jul 2011 22:12:46 -0500

39 lines

New Thread

Aluminum Electrolytic Capacitor Bungs

Re: Aluminum Electrolytic Capacitor Bungs

Inge Hernefjord

Fri, 29 Jul 2011 19:37:37 +0200

62 lines

Aluminum Electrolytic Capacitor Bungs

Victor Hernandez

Fri, 29 Jul 2011 11:41:07 -0500

37 lines

New Thread

AW: [TN] High Vacuum Substrate

AW: [TN] High Vacuum Substrate

Torsten Hagge

Fri, 29 Jul 2011 16:13:55 +0200

111 lines

New Thread

AW: [TN] Missing PTH Barrels in Connector

Re: AW: [TN] Missing PTH Barrels in Connector

Tom Burek

Thu, 28 Jul 2011 08:51:28 -0600

395 lines

Re: AW: [TN] Missing PTH Barrels in Connector

David D. Hillman

Thu, 28 Jul 2011 07:02:20 -0500

329 lines

Re: AW: [TN] Missing PTH Barrels in Connector

Gerald Bogert

Thu, 28 Jul 2011 05:31:26 -0400

252 lines

Re: AW: [TN] Missing PTH Barrels in Connector

Rex Waygood

Thu, 28 Jul 2011 08:32:56 +0100

224 lines

AW: [TN] Missing PTH Barrels in Connector

Neifer, Gebhard

Thu, 28 Jul 2011 06:43:09 +0000

187 lines

New Thread

AW: [TN] NTC Friday Element Quiz - the Question

AW: [TN] NTC Friday Element Quiz - the Question

Torsten Hagge

Fri, 22 Jul 2011 11:53:57 +0200

42 lines

New Thread

BGA ball dewet from substrate

Re: BGA ball dewet from substrate

Tan Geok Ang

Sat, 2 Jul 2011 08:12:09 +0800

178 lines

Re: BGA ball dewet from substrate

Stadem, Richard D.

Fri, 1 Jul 2011 08:58:07 -0500

200 lines

Re: BGA ball dewet from substrate

vladimir Igoshev

Fri, 1 Jul 2011 13:28:11 +0000

101 lines

Re: BGA ball dewet from substrate

Chris Mahanna

Fri, 1 Jul 2011 09:12:13 -0400

121 lines

Re: BGA ball dewet from substrate

David D. Hillman

Fri, 1 Jul 2011 07:32:40 -0500

137 lines

Re: BGA ball dewet from substrate

Victor Hernandez

Fri, 1 Jul 2011 07:09:27 -0500

97 lines

Re: BGA ball dewet from substrate

Steve Gregory

Fri, 1 Jul 2011 07:58:48 -0400

101 lines

Re: BGA ball dewet from substrate

Post, Scott E

Fri, 1 Jul 2011 11:43:03 +0000

75 lines

Re: BGA ball dewet from substrate

Thayer, Wayne - IIW

Fri, 1 Jul 2011 07:09:44 -0400

80 lines

Re: BGA ball dewet from substrate

Tan Geok Ang

Fri, 1 Jul 2011 13:35:34 +0800

183 lines

New Thread

BGA Repair Methods

Re: BGA Repair Methods

Braddock, Iain (UK)

Fri, 8 Jul 2011 09:04:08 +0100

286 lines

Re: BGA Repair Methods

Stadem, Richard D.

Thu, 7 Jul 2011 13:06:05 -0500

337 lines

Re: BGA Repair Methods

Amol Kane

Thu, 7 Jul 2011 14:02:00 -0400

221 lines

Re: BGA Repair Methods

David D. Hillman

Thu, 7 Jul 2011 11:10:03 -0500

302 lines

Re: BGA Repair Methods

Stadem, Richard D.

Thu, 7 Jul 2011 09:00:45 -0500

211 lines

Re: BGA Repair Methods

Braddock, Iain (UK)

Thu, 7 Jul 2011 14:45:48 +0100

259 lines

Re: BGA Repair Methods

Amol Kane

Thu, 7 Jul 2011 08:38:46 -0400

182 lines

Re: BGA Repair Methods

Nowland, Russell Howard (Russell)

Wed, 6 Jul 2011 15:07:44 -0500

217 lines

Re: BGA Repair Methods

Stadem, Richard D.

Wed, 6 Jul 2011 10:59:19 -0500

148 lines

BGA Repair Methods

Russ

Tue, 5 Jul 2011 10:14:43 -0500

54 lines

New Thread

Black Pad?

Re: Black Pad?

Montanher, Mickael Canassa

Thu, 28 Jul 2011 19:22:01 +0200

45 lines

New Thread

Breakaway help

Re: Breakaway help

Brian Chandler

Thu, 7 Jul 2011 19:43:47 -0500

25 lines

Re: Breakaway help

Amol Kane

Thu, 7 Jul 2011 08:26:16 -0400

169 lines

Re: Breakaway help

Bush, Jeffrey D. (US SSA)

Thu, 7 Jul 2011 08:20:05 -0400

139 lines

Re: Breakaway help

Mickey Weiner

Thu, 7 Jul 2011 15:01:01 +0300

163 lines

Re: Breakaway help

Bush, Jeffrey D. (US SSA)

Thu, 7 Jul 2011 07:54:10 -0400

66 lines

Re: Breakaway help

Shanmugam, Nagaraj

Thu, 7 Jul 2011 14:52:02 +0530

129 lines

Re: Breakaway help

Mickey Weiner

Thu, 7 Jul 2011 10:13:25 +0300

87 lines

Re: Breakaway help

Krishnan (Radhakrishnan) Chezhian

Thu, 7 Jul 2011 13:41:55 +0800

103 lines

Breakaway help

Shanmugam, Nagaraj

Thu, 7 Jul 2011 10:59:03 +0530

54 lines

New Thread

Capacitor Crack

Re: Capacitor Crack

<>

Tue, 12 Jul 2011 16:51:03 -0700

122 lines

Re: Capacitor Crack

Phil Bavaro

Tue, 12 Jul 2011 11:46:55 -0700

136 lines

Re: Capacitor Crack

Woolley, Mark D. (Mark)

Tue, 12 Jul 2011 11:28:05 -0600

87 lines

Re: Capacitor Crack

Wenger, George M.

Tue, 12 Jul 2011 11:54:10 -0500

60 lines

Re: Capacitor Crack

McGee, Michael

Tue, 12 Jul 2011 12:44:46 -0400

56 lines

Re: Capacitor Crack

David D. Hillman

Tue, 12 Jul 2011 11:42:29 -0500

92 lines

Capacitor Crack

J B Ribeiro

Tue, 12 Jul 2011 11:23:59 -0500

34 lines

New Thread

Castellated Hole Acceptability

Re: Castellated Hole Acceptability

Gregg Owens

Tue, 5 Jul 2011 12:02:06 -0700

78 lines

Castellated Hole Acceptability

Kenneth J. Wood

Tue, 5 Jul 2011 13:14:05 -0400

40 lines

New Thread

Ceramic Resistor Fabrication

Ceramic Resistor Fabrication

Victor Hernandez

Thu, 14 Jul 2011 07:48:06 -0500

204 lines

New Thread

CF-8 Component Prep Machine

CF-8 Component Prep Machine

Nina Preston

Mon, 25 Jul 2011 16:11:11 -0500

30 lines

New Thread

Data Transfer Databases

Data Transfer Databases

Noel, William J - GS

Thu, 28 Jul 2011 12:43:46 -0400

59 lines

New Thread

Destruction of PCAs and PCBs

Re: Destruction of PCAs and PCBs

Don McFarland

Fri, 22 Jul 2011 14:27:58 -0600

118 lines

Re: Destruction of PCAs and PCBs

Phil Nutting

Fri, 22 Jul 2011 16:19:40 -0400

98 lines

Destruction of PCAs and PCBs

Don McFarland

Fri, 22 Jul 2011 13:22:54 -0600

36 lines

New Thread

Developing Operator box assembly work instructions from SolidWorks files

Re: Developing Operator box assembly work instructions from SolidWorks files

Eric Christison

Fri, 1 Jul 2011 11:49:42 +0100

105 lines

New Thread

ENiG causing galvanic corrosion?

Re: ENiG causing galvanic corrosion?

Reuven Rokah

Thu, 7 Jul 2011 21:46:22 +0300

84 lines

Re: ENiG causing galvanic corrosion?

Pete

Thu, 7 Jul 2011 13:12:03 -0500

39 lines

Re: ENiG causing galvanic corrosion?

R Sedlak

Thu, 7 Jul 2011 10:38:11 -0700

68 lines

Re: ENiG causing galvanic corrosion?

Victor Hernandez

Thu, 7 Jul 2011 11:47:35 -0500

112 lines

Re: ENiG causing galvanic corrosion?

Reuven Rokah

Thu, 7 Jul 2011 19:32:09 +0300

75 lines

ENiG causing galvanic corrosion?

Pete

Thu, 7 Jul 2011 11:07:19 -0500

32 lines

New Thread

EXTERNAL: Re: [TN] glue for part addition

Re: EXTERNAL: Re: [TN] glue for part addition

Amol Kane

Mon, 18 Jul 2011 15:38:21 -0400

160 lines

Re: EXTERNAL: Re: [TN] glue for part addition

Gumpert, Ben

Mon, 18 Jul 2011 12:39:35 -0400

123 lines

New Thread

Fab defects - process or mechanical?

Re: Fab defects - process or mechanical?

Pete

Fri, 29 Jul 2011 11:05:49 -0500

26 lines

Re: Fab defects - process or mechanical?

Andrzej Zielinski

Fri, 29 Jul 2011 16:03:28 +0000

74 lines

Re: Fab defects - process or mechanical?

Bush, Jeffrey D. (US SSA)

Fri, 29 Jul 2011 10:51:50 -0400

70 lines

Fab defects - process or mechanical?

Pete

Fri, 29 Jul 2011 09:15:27 -0500

42 lines

New Thread

Finishing Quality

Finishing Quality

Juliano Ribeiro

Fri, 15 Jul 2011 12:51:46 -0300

57 lines

New Thread

FW: Thin Film Ceramic Resistor, 51K, serpentine

Re: FW: Thin Film Ceramic Resistor, 51K, serpentine

Steve Gregory

Tue, 12 Jul 2011 12:02:44 -0400

94 lines

FW: Thin Film Ceramic Resistor, 51K, serpentine

Victor Hernandez

Tue, 12 Jul 2011 09:36:21 -0500

55 lines

New Thread

FW: [TN] IPC-A-610 Conformal Coating - Coverage

Re: FW: [TN] IPC-A-610 Conformal Coating - Coverage

Lum Wee Mei

Fri, 15 Jul 2011 10:53:37 -0500

385 lines

FW: [TN] IPC-A-610 Conformal Coating - Coverage

Steve Gregory

Fri, 15 Jul 2011 09:25:43 -0400

354 lines

New Thread

glue for part addition

Re: glue for part addition

Steve Gregory

Mon, 18 Jul 2011 12:01:56 -0400

75 lines

glue for part addition

Amol Kane

Mon, 18 Jul 2011 11:43:17 -0400

40 lines

New Thread

hard gold verification

Re: hard gold verification

Victor Hernandez

Wed, 27 Jul 2011 14:01:31 -0500

154 lines

Re: hard gold verification

Chris Mahanna

Wed, 27 Jul 2011 12:22:42 -0400

122 lines

Re: hard gold verification

Anil kher

Sat, 23 Jul 2011 14:55:59 +0530

108 lines

Re: hard gold verification

Gerry Gagnon

Thu, 21 Jul 2011 15:21:36 -0400

95 lines

Re: hard gold verification

Woolley, Mark D. (Mark)

Thu, 21 Jul 2011 13:12:29 -0600

106 lines

Re: hard gold verification

R Sedlak

Thu, 21 Jul 2011 09:52:06 -0700

100 lines

hard gold verification

Chris Mahanna

Thu, 21 Jul 2011 12:21:00 -0400

60 lines

New Thread

High Vacuum Substrate

Re: High Vacuum Substrate

Inge Hernefjord

Sat, 30 Jul 2011 00:09:14 +0200

166 lines

Re: High Vacuum Substrate

Inge

Fri, 29 Jul 2011 20:06:13 +0200

149 lines

Re: High Vacuum Substrate

Kenneth J. Wood

Fri, 29 Jul 2011 13:42:10 -0400

117 lines

Re: High Vacuum Substrate

Kenneth J. Wood

Fri, 29 Jul 2011 13:40:52 -0400

118 lines

Re: High Vacuum Substrate

Inge Hernefjord

Fri, 29 Jul 2011 19:33:26 +0200

88 lines

Re: High Vacuum Substrate

Steven Creswick

Fri, 29 Jul 2011 11:19:51 -0400

94 lines

Re: High Vacuum Substrate

Roger Tingler

Fri, 29 Jul 2011 10:12:38 -0400

97 lines

Re: High Vacuum Substrate

Joyce Koo

Fri, 29 Jul 2011 09:54:56 -0400

101 lines

High Vacuum Substrate

Kenneth J. Wood

Fri, 29 Jul 2011 09:51:45 -0400

56 lines

New Thread

I'm back (NTC)

Re: I'm back (NTC)

Tan Geok Ang

Fri, 8 Jul 2011 09:37:29 +0800

128 lines

Re: I'm back (NTC)

Guy Ramsey

Thu, 7 Jul 2011 11:29:00 -0400

87 lines

Re: I'm back (NTC)

Guy Ramsey

Thu, 7 Jul 2011 11:27:59 -0400

60 lines

Re: I'm back (NTC)

Reuven Rokah

Thu, 7 Jul 2011 17:35:36 +0300

79 lines

Re: I'm back (NTC)

Stadem, Richard D.

Thu, 7 Jul 2011 09:14:02 -0500

64 lines

Re: I'm back (NTC)

ALLEN, LOA

Thu, 7 Jul 2011 06:50:05 -0700

74 lines

Re: I'm back (NTC)

Victor Hernandez

Thu, 7 Jul 2011 08:01:24 -0500

61 lines

Re: I'm back (NTC)

Joyce Koo

Thu, 7 Jul 2011 08:46:51 -0400

71 lines

Re: I'm back (NTC)

Amol Kane

Thu, 7 Jul 2011 08:40:44 -0400

68 lines

I'm back (NTC)

Linda Langley

Thu, 7 Jul 2011 08:29:24 -0400

32 lines

New Thread

Insertion problem with taped through hole radial Leds

Insertion problem with taped through hole radial Leds

Dominic Boudreau

Thu, 28 Jul 2011 12:14:25 -0400

72 lines

New Thread

Ionic contamination problems

Re: Ionic contamination problems

Bev Christian

Sat, 16 Jul 2011 21:11:47 -0400

102 lines

Re: Ionic contamination problems

Steven Kelly

Sat, 16 Jul 2011 13:52:11 -0400

94 lines

Re: Ionic contamination problems

Brian Ellis

Sat, 16 Jul 2011 09:04:11 +0300

60 lines

Re: Ionic contamination problems

Bev Christian

Fri, 15 Jul 2011 21:07:20 -0400

70 lines

Re: Ionic contamination problems

Glidden, Kevin

Fri, 15 Jul 2011 13:43:22 -0400

87 lines

Ionic contamination problems

Steven Kelly

Fri, 15 Jul 2011 12:19:55 -0500

34 lines

New Thread

IPC-A-600 CERTIFICATION

Re: IPC-A-600 CERTIFICATION

Ted Edwards

Sat, 30 Jul 2011 00:19:10 +0000

154 lines

Re: IPC-A-600 CERTIFICATION

Ted Edwards

Sat, 30 Jul 2011 00:05:17 +0000

191 lines

Re: IPC-A-600 CERTIFICATION

Carroll, Thomas A

Thu, 28 Jul 2011 19:53:00 -0500

155 lines

Re: IPC-A-600 CERTIFICATION

Lum Wee Mei

Fri, 29 Jul 2011 08:37:46 +0800

163 lines

Re: IPC-A-600 CERTIFICATION

Phil Bavaro

Thu, 28 Jul 2011 17:05:15 -0700

116 lines

Re: IPC-A-600 CERTIFICATION

Don McFarland

Thu, 28 Jul 2011 10:30:53 -0600

70 lines

Re: IPC-A-600 CERTIFICATION

Stadem, Richard D.

Thu, 28 Jul 2011 10:47:07 -0500

85 lines

Re: IPC-A-600 CERTIFICATION

Andrzej Zielinski

Thu, 28 Jul 2011 15:28:52 +0000

72 lines

Re: IPC-A-600 CERTIFICATION

Marsico, James - ES

Thu, 28 Jul 2011 11:21:30 -0400

99 lines

IPC-A-600 CERTIFICATION

Phil Bavaro

Thu, 28 Jul 2011 08:16:59 -0700

52 lines

New Thread

IPC-A-610 Conformal Coating - Coverage

Re: IPC-A-610 Conformal Coating - Coverage

Graham Naisbitt

Thu, 14 Jul 2011 16:53:48 +0100

231 lines

Re: IPC-A-610 Conformal Coating - Coverage

Marsico, James - ES

Thu, 14 Jul 2011 11:43:19 -0400

341 lines

Re: IPC-A-610 Conformal Coating - Coverage

Bush, Jeffrey D. (US SSA)

Thu, 14 Jul 2011 11:36:00 -0400

179 lines

Re: IPC-A-610 Conformal Coating - Coverage

Temkin, Gregg

Thu, 14 Jul 2011 14:36:18 +0000

154 lines

Re: IPC-A-610 Conformal Coating - Coverage

Lum Wee Mei

Thu, 14 Jul 2011 09:29:18 -0500

284 lines

Re: IPC-A-610 Conformal Coating - Coverage

Steve Gregory

Thu, 14 Jul 2011 09:02:07 -0400

254 lines

Re: IPC-A-610 Conformal Coating - Coverage

Bush, Jeffrey D. (US SSA)

Thu, 14 Jul 2011 08:39:18 -0400

110 lines

Re: IPC-A-610 Conformal Coating - Coverage

Victor Hernandez

Thu, 14 Jul 2011 07:25:59 -0500

208 lines

Re: IPC-A-610 Conformal Coating - Coverage

Marsico, James - ES

Thu, 14 Jul 2011 08:27:22 -0400

226 lines

Re: IPC-A-610 Conformal Coating - Coverage

Marsico, James - ES

Thu, 14 Jul 2011 07:26:40 -0400

177 lines

IPC-A-610 Conformal Coating - Coverage

Lum Wee Mei

Thu, 14 Jul 2011 15:33:32 +0800

67 lines

New Thread

IPC-A-610 Conformal Coating - Coverage (re-visit)

IPC-A-610 Conformal Coating - Coverage (re-visit)

Lum Wee Mei

Wed, 20 Jul 2011 12:25:45 +0800

417 lines

New Thread

isolation

isolation

Torsten Hagge

Thu, 28 Jul 2011 14:33:10 +0200

80 lines

New Thread

J-STD-001E 5.5 and IPC-A-620A 4.9 Terminal Soldering

Re: J-STD-001E 5.5 and IPC-A-620A 4.9 Terminal Soldering

Gregg Owens

Mon, 11 Jul 2011 16:30:46 -0700

64 lines

J-STD-001E 5.5 and IPC-A-620A 4.9 Terminal Soldering

Evamaria Jones

Mon, 11 Jul 2011 15:52:03 -0500

26 lines

New Thread

Lead Free solder has performed well...

Re: Lead Free solder has performed well...

Ron Lasky

Fri, 29 Jul 2011 15:48:50 -0500

29 lines

Re: Lead Free solder has performed well...

Bev Christian

Fri, 29 Jul 2011 07:20:09 -0400

97 lines

Re: Lead Free solder has performed well...

Eric Christison

Fri, 29 Jul 2011 11:55:42 +0100

68 lines

Re: Lead Free solder has performed well...

Technet Legg

Thu, 28 Jul 2011 07:07:16 -0500

35 lines

Re: Lead Free solder has performed well...

Patrick Bruneel

Mon, 25 Jul 2011 13:29:25 -0500

181 lines

Re: Lead Free solder has performed well...

Steve Gregory

Mon, 25 Jul 2011 12:12:05 -0400

151 lines

Re: Lead Free solder has performed well...

Dennis Fritz

Mon, 25 Jul 2011 07:26:37 -0400

123 lines

Re: Lead Free solder has performed well...

Mike Fenner

Mon, 25 Jul 2011 10:50:42 +0100

81 lines

Re: Lead Free solder has performed well...

Mike Fenner

Mon, 25 Jul 2011 00:39:54 +0100

206 lines

Re: Lead Free solder has performed well...

Joyce Koo

Sun, 24 Jul 2011 18:57:55 -0400

65 lines

Re: Lead Free solder has performed well...

Gary Crowell

Sun, 24 Jul 2011 16:00:38 -0600

37 lines

Re: Lead Free solder has performed well...

Joyce Koo

Sun, 24 Jul 2011 13:20:15 -0400

235 lines

Re: Lead Free solder has performed well...

Bev Christian

Sun, 24 Jul 2011 08:55:24 -0400

162 lines

Re: Lead Free solder has performed well...

Steve Gregory

Sat, 23 Jul 2011 22:36:49 -0400

111 lines

Re: Lead Free solder has performed well...

Ron Lasky

Sat, 23 Jul 2011 11:38:07 -0500

31 lines

Re: Lead Free solder has performed well...

Ron Lasky

Sat, 23 Jul 2011 11:15:03 -0500

64 lines

Re: Lead Free solder has performed well...

Graham Naisbitt

Thu, 21 Jul 2011 15:25:12 +0100

135 lines

Re: Lead Free solder has performed well...

Ian Hanna

Thu, 21 Jul 2011 09:51:36 -0400

78 lines

Re: Lead Free solder has performed well...

Jack Olson

Thu, 21 Jul 2011 08:48:46 -0500

40 lines

Re: Lead Free solder has performed well...

Pete

Wed, 20 Jul 2011 10:50:56 -0500

28 lines

Re: Lead Free solder has performed well...

Rex Waygood

Wed, 20 Jul 2011 08:33:57 +0100

100 lines

Re: Lead Free solder has performed well...

Steve Gregory

Tue, 19 Jul 2011 19:10:40 -0400

101 lines

Re: Lead Free solder has performed well...

Mike Fenner

Tue, 19 Jul 2011 18:55:04 +0100

112 lines

Re: Lead Free solder has performed well...

Bev Christian

Tue, 19 Jul 2011 13:36:35 -0400

71 lines

Re: Lead Free solder has performed well...

Gary Crowell

Tue, 19 Jul 2011 10:33:19 -0600

40 lines

Re: Lead Free solder has performed well...

Rivera, Raye

Mon, 18 Jul 2011 18:54:40 -0700

415 lines

Re: Lead Free solder has performed well...

Bev Christian

Mon, 18 Jul 2011 21:40:30 -0400

326 lines

Re: Lead Free solder has performed well...

Mike Fenner

Mon, 18 Jul 2011 22:31:17 +0100

306 lines

Re: Lead Free solder has performed well...

Bob Landman

Mon, 18 Jul 2011 12:50:35 -0400

383 lines

Re: Lead Free solder has performed well...

Wenger, George M.

Mon, 18 Jul 2011 10:55:40 -0500

357 lines

Re: Lead Free solder has performed well...

Whittaker, Dewey (EHCOE)

Mon, 18 Jul 2011 08:35:13 -0700

562 lines

Re: Lead Free solder has performed well...

David D. Hillman

Mon, 18 Jul 2011 10:00:06 -0500

352 lines

Re: Lead Free solder has performed well...

Eric Christison

Mon, 18 Jul 2011 15:52:23 +0100

258 lines

Re: Lead Free solder has performed well...

Bob Landman

Mon, 18 Jul 2011 10:38:48 -0400

299 lines

Re: Lead Free solder has performed well...

Jack Olson

Fri, 15 Jul 2011 09:08:46 -0500

68 lines

Re: Lead Free solder has performed well...

Joyce Koo

Fri, 15 Jul 2011 06:17:54 -0400

87 lines

Re: Lead Free solder has performed well...

Pete

Fri, 15 Jul 2011 02:41:10 -0500

35 lines

Re: Lead Free solder has performed well...

Tan Geok Ang

Fri, 15 Jul 2011 11:33:00 +0800

77 lines

Re: Lead Free solder has performed well...

Blair Hogg

Thu, 14 Jul 2011 22:31:30 -0500

45 lines

Re: Lead Free solder has performed well...

Bev Christian

Thu, 14 Jul 2011 21:24:21 -0400

236 lines

Re: Lead Free solder has performed well...

Paul Reid

Thu, 14 Jul 2011 19:10:04 -0400

204 lines

Re: Lead Free solder has performed well...

John Burke

Thu, 14 Jul 2011 13:43:09 -0700

147 lines

Re: Lead Free solder has performed well...

Stadem, Richard D.

Thu, 14 Jul 2011 15:40:14 -0500

156 lines

Re: Lead Free solder has performed well...

Post, Scott E

Thu, 14 Jul 2011 18:57:45 +0000

93 lines

Re: Lead Free solder has performed well...

Whittaker, Dewey (EHCOE)

Thu, 14 Jul 2011 11:11:41 -0700

135 lines

Re: Lead Free solder has performed well...

Wenger, George M.

Thu, 14 Jul 2011 12:59:26 -0500

74 lines

Lead Free solder has performed well...

Eric Christison

Thu, 14 Jul 2011 17:20:10 +0100

63 lines

New Thread

Lead-free leg

Lead-free leg

Mary LI

Wed, 27 Jul 2011 01:52:12 -0500

37 lines

New Thread

Leaded or non

Re: Leaded or non

Steven Kelly

Tue, 12 Jul 2011 12:37:00 -0400

223 lines

Re: Leaded or non

David D. Hillman

Tue, 12 Jul 2011 04:28:57 -0500

173 lines

Re: Leaded or non

Stadem, Richard D.

Mon, 11 Jul 2011 09:57:14 -0500

169 lines

Re: Leaded or non

Jack Olson

Mon, 11 Jul 2011 09:50:45 -0500

166 lines

Re: Leaded or non

Wenger, George M.

Mon, 11 Jul 2011 09:41:53 -0500

166 lines

Re: Leaded or non

Jack Olson

Mon, 11 Jul 2011 09:18:02 -0500

121 lines

Re: Leaded or non

Guy Ramsey

Fri, 8 Jul 2011 09:55:26 -0400

215 lines

Re: Leaded or non

Tan Geok Ang

Fri, 8 Jul 2011 14:36:48 +0800

108 lines

Re: Leaded or non

Grunde Gjertsen

Fri, 8 Jul 2011 05:17:27 +0000

76 lines

Re: Leaded or non

Paul Edwards

Thu, 7 Jul 2011 14:00:19 -0700

102 lines

Re: Leaded or non

Andrzej Zielinski

Thu, 7 Jul 2011 20:59:57 +0000

114 lines

Re: Leaded or non

Wenger, George M.

Thu, 7 Jul 2011 15:42:26 -0500

138 lines

Re: Leaded or non

Rivera, Raye

Thu, 7 Jul 2011 13:35:21 -0700

220 lines

Re: Leaded or non

Steven Kelly

Thu, 7 Jul 2011 16:17:33 -0400

135 lines

Re: Leaded or non

Harp, Ken

Thu, 7 Jul 2011 20:04:54 +0000

108 lines

Re: Leaded or non

Amol Kane

Thu, 7 Jul 2011 15:59:53 -0400

83 lines

Re: Leaded or non

<>

Thu, 7 Jul 2011 22:39:34 +0300

77 lines

Re: Leaded or non

Steven Kelly

Thu, 7 Jul 2011 15:32:38 -0400

104 lines

Re: Leaded or non

David D. Hillman

Thu, 7 Jul 2011 14:26:16 -0500

91 lines

Re: Leaded or non

Roger Tingler

Thu, 7 Jul 2011 14:18:15 -0400

79 lines

Re: Leaded or non

Joyce Koo

Thu, 7 Jul 2011 14:12:20 -0400

77 lines

Leaded or non

Steven Kelly

Thu, 7 Jul 2011 12:56:04 -0500

38 lines

New Thread

likelihood of soic-8 package breach

Re: likelihood of soic-8 package breach

Steven Creswick

Mon, 25 Jul 2011 17:19:26 -0400

137 lines

Re: likelihood of soic-8 package breach

Guy Ramsey

Mon, 25 Jul 2011 12:33:14 -0400

106 lines

Re: likelihood of soic-8 package breach

Steven Creswick

Mon, 25 Jul 2011 12:02:36 -0400

75 lines

likelihood of soic-8 package breach

Chris Mahanna

Mon, 25 Jul 2011 11:54:49 -0400

43 lines

New Thread

Looking for wire solder

Re: Looking for wire solder

Karen Tellefsen

Thu, 28 Jul 2011 12:10:31 -0400

140 lines

Looking for wire solder

Marsico, James - ES

Thu, 28 Jul 2011 07:38:21 -0400

54 lines

New Thread

Micro voids when soldering to hard gold

Re: Micro voids when soldering to hard gold

Victor Hernandez

Mon, 11 Jul 2011 05:26:19 -0500

83 lines

Re: Micro voids when soldering to hard gold

Joyce Koo

Sun, 10 Jul 2011 06:12:11 -0400

153 lines

Re: Micro voids when soldering to hard gold

Reuven Rokah

Sun, 10 Jul 2011 08:56:29 +0300

99 lines

Re: Micro voids when soldering to hard gold

Reuven Rokah

Sun, 10 Jul 2011 08:53:19 +0300

98 lines

Re: Micro voids when soldering to hard gold

vladimir Igoshev

Sat, 9 Jul 2011 00:28:00 +0000

77 lines

Micro voids when soldering to hard gold

Crandall, Ken

Fri, 8 Jul 2011 16:23:49 -0400

52 lines

New Thread

Missing PTH Barrels in Connector

Re: Missing PTH Barrels in Connector

vladimir Igoshev

Thu, 28 Jul 2011 11:47:47 +0000

96 lines

Re: Missing PTH Barrels in Connector

Wenger, George M.

Thu, 28 Jul 2011 06:42:37 -0500

87 lines

Re: Missing PTH Barrels in Connector

Victor Hernandez

Thu, 28 Jul 2011 06:31:51 -0500

79 lines

Re: Missing PTH Barrels in Connector

Paul Reid

Thu, 28 Jul 2011 07:22:39 -0400

45 lines

Re: Missing PTH Barrels in Connector

Joyce Koo

Wed, 27 Jul 2011 22:23:25 -0400

147 lines

Re: Missing PTH Barrels in Connector

Thomas Bauer

Wed, 27 Jul 2011 19:07:20 -0700

104 lines

Re: Missing PTH Barrels in Connector

Robert Kondner

Wed, 27 Jul 2011 21:04:46 -0400

98 lines

Missing PTH Barrels in Connector

Tom Burek

Wed, 27 Jul 2011 17:57:12 -0600

68 lines

New Thread

New Hand Soldering Competition at IPC Midwest Conference and Exhibition

New Hand Soldering Competition at IPC Midwest Conference and Exhibition

Gayle Pervos

Fri, 15 Jul 2011 15:03:49 -0500

57 lines

New Thread

NTC Friday Element Quiz - the Answer

Re: NTC Friday Element Quiz - the Answer

Graham Naisbitt

Wed, 27 Jul 2011 12:09:27 +0100

276 lines

Re: NTC Friday Element Quiz - the Answer

Robert Wolfe

Tue, 26 Jul 2011 09:06:43 -0400

263 lines

Re: NTC Friday Element Quiz - the Answer

Joyce Koo

Tue, 26 Jul 2011 08:58:50 -0400

272 lines

Re: NTC Friday Element Quiz - the Answer

Graham Naisbitt

Tue, 26 Jul 2011 13:50:58 +0100

235 lines

NTC Friday Element Quiz - the Answer

David D. Hillman

Mon, 25 Jul 2011 09:01:37 -0500

171 lines

Re: NTC Friday Element Quiz - the Answer

Whittaker, Dewey (EHCOE)

Mon, 18 Jul 2011 10:32:59 -0700

442 lines

Re: NTC Friday Element Quiz - the Answer

Stadem, Richard D.

Mon, 18 Jul 2011 12:18:13 -0500

434 lines

Re: NTC Friday Element Quiz - the Answer

Whittaker, Dewey (EHCOE)

Mon, 18 Jul 2011 09:20:17 -0700

406 lines

Re: NTC Friday Element Quiz - the Answer

David D. Hillman

Mon, 18 Jul 2011 11:10:20 -0500

375 lines

Re: NTC Friday Element Quiz - the Answer

Stadem, Richard D.

Mon, 18 Jul 2011 10:58:07 -0500

229 lines

Re: NTC Friday Element Quiz - the Answer

Brian Ellis

Mon, 18 Jul 2011 18:31:17 +0300

316 lines

Re: NTC Friday Element Quiz - the Answer

David D. Hillman

Mon, 18 Jul 2011 08:26:44 -0500

254 lines

NTC Friday Element Quiz - the Answer

David D. Hillman

Mon, 18 Jul 2011 07:47:41 -0500

166 lines

Re: NTC Friday Element Quiz - the Answer

Nigel Burtt

Wed, 13 Jul 2011 02:39:06 -0500

38 lines

NTC Friday Element Quiz - the Answer

David D. Hillman

Tue, 12 Jul 2011 03:59:26 -0500

159 lines

Re: NTC Friday Element Quiz - the Answer

Brian Ellis

Thu, 7 Jul 2011 16:16:08 +0300

234 lines

Re: NTC Friday Element Quiz - the Answer

Brian Ellis

Wed, 6 Jul 2011 18:48:02 +0300

196 lines

NTC Friday Element Quiz - the Answer

David D. Hillman

Wed, 6 Jul 2011 08:31:26 -0500

162 lines

Re: NTC Friday Element Quiz - the Answer

David D. Hillman

Fri, 1 Jul 2011 07:39:48 -0500

298 lines

Re: NTC Friday Element Quiz - the Answer

Steve Gregory

Fri, 1 Jul 2011 08:03:48 -0400

240 lines

New Thread

NTC Friday Element Quiz - the Question

Re: NTC Friday Element Quiz - the Question

Dennis Fritz

Fri, 29 Jul 2011 14:41:09 -0400

260 lines

Re: NTC Friday Element Quiz - the Question

Robert Wolfe

Fri, 29 Jul 2011 11:29:20 -0400

208 lines

Re: NTC Friday Element Quiz - the Question

David D. Hillman

Fri, 29 Jul 2011 07:17:59 -0500

208 lines

Re: NTC Friday Element Quiz - the Question

Dennis Fritz

Thu, 28 Jul 2011 18:12:35 -0400

217 lines

Re: NTC Friday Element Quiz - the Question

Dennis Fritz

Thu, 28 Jul 2011 18:09:26 -0400

171 lines

Re: NTC Friday Element Quiz - the Question

Phil Kinner

Thu, 28 Jul 2011 23:03:04 +0100

205 lines

Re: NTC Friday Element Quiz - the Question

Dennis Fritz

Thu, 28 Jul 2011 17:53:53 -0400

167 lines

NTC Friday Element Quiz - the Question

David D. Hillman

Thu, 28 Jul 2011 16:38:42 -0500

161 lines

Re: NTC Friday Element Quiz - the Question

Graham Naisbitt

Fri, 22 Jul 2011 11:37:51 +0100

194 lines

Re: NTC Friday Element Quiz - the Question

SUN Zhaopu

Fri, 22 Jul 2011 16:33:17 +0800

187 lines

Re: NTC Friday Element Quiz - the Question

James Head

Fri, 22 Jul 2011 08:17:29 +0100

65 lines

Re: NTC Friday Element Quiz - the Question

Stadem, Richard D.

Thu, 21 Jul 2011 16:10:18 -0500

190 lines

Re: NTC Friday Element Quiz - the Question

Robert Wolfe

Thu, 21 Jul 2011 17:06:28 -0400

190 lines

NTC Friday Element Quiz - the Question

David D. Hillman

Thu, 21 Jul 2011 15:52:52 -0500

150 lines

Re: NTC Friday Element Quiz - the Question

Blair Hogg

Fri, 15 Jul 2011 09:22:22 -0500

39 lines

Re: NTC Friday Element Quiz - the Question

Eric Christison

Fri, 15 Jul 2011 14:39:44 +0100

201 lines

Re: NTC Friday Element Quiz - the Question

Brian Ellis

Fri, 15 Jul 2011 15:38:23 +0300

165 lines

Re: NTC Friday Element Quiz - the Question

Stadem, Richard D.

Fri, 15 Jul 2011 07:08:19 -0500

183 lines

NTC Friday Element Quiz - the Question

David D. Hillman

Fri, 15 Jul 2011 07:02:52 -0500

143 lines

Re: NTC Friday Element Quiz - the Question

Bev Christian

Fri, 8 Jul 2011 21:41:22 -0400

196 lines

Re: NTC Friday Element Quiz - the Question

Bev Christian

Fri, 8 Jul 2011 21:38:54 -0400

342 lines

Re: NTC Friday Element Quiz - the Question

Bev Christian

Fri, 8 Jul 2011 21:26:08 -0400

298 lines

Re: NTC Friday Element Quiz - the Question

Blair Hogg

Fri, 8 Jul 2011 18:57:16 -0500

53 lines

Re: NTC Friday Element Quiz - the Question

Bryon Boone

Fri, 8 Jul 2011 13:12:05 -0400

197 lines

Re: NTC Friday Element Quiz - the Question

Mike Fenner

Fri, 8 Jul 2011 17:56:18 +0100

287 lines

Re: NTC Friday Element Quiz - the Question

<>

Fri, 8 Jul 2011 17:13:55 +0300

191 lines

Re: NTC Friday Element Quiz - the Question

Nigel Burtt

Fri, 8 Jul 2011 08:21:53 -0500

23 lines

Re: NTC Friday Element Quiz - the Question

Alasdair Naisbitt

Fri, 8 Jul 2011 13:41:26 +0100

181 lines

NTC Friday Element Quiz - the Question

David D. Hillman

Fri, 8 Jul 2011 07:05:09 -0500

141 lines

Re: NTC Friday Element Quiz - the Question

Mike Fenner

Thu, 7 Jul 2011 15:31:01 +0100

287 lines

Re: NTC Friday Element Quiz - the Question

Joyce Koo

Thu, 7 Jul 2011 08:47:56 -0400

368 lines

Re: NTC Friday Element Quiz - the Question

Douglas Pauls

Thu, 7 Jul 2011 07:40:05 -0500

304 lines

Re: NTC Friday Element Quiz - the Question

Bev Christian

Thu, 7 Jul 2011 07:29:12 -0400

251 lines

Re: NTC Friday Element Quiz - the Question

Joyce Koo

Tue, 5 Jul 2011 06:28:14 -0400

303 lines

Re: NTC Friday Element Quiz - the Question

Graham Naisbitt

Tue, 5 Jul 2011 09:34:19 +0100

263 lines

Re: NTC Friday Element Quiz - the Question

Bev Christian

Mon, 4 Jul 2011 22:18:15 -0400

211 lines

Re: NTC Friday Element Quiz - the Question

Blair Hogg

Fri, 1 Jul 2011 13:12:12 -0500

45 lines

Re: NTC Friday Element Quiz - the Question

Bryon Boone

Fri, 1 Jul 2011 13:58:45 -0400

203 lines

Re: NTC Friday Element Quiz - the Question

Brian Ellis

Fri, 1 Jul 2011 19:02:32 +0300

166 lines

Re: NTC Friday Element Quiz - the Question

David D. Hillman

Fri, 1 Jul 2011 09:23:56 -0500

104 lines

Re: NTC Friday Element Quiz - the Question

Stadem, Richard D.

Fri, 1 Jul 2011 08:44:42 -0500

51 lines

Re: NTC Friday Element Quiz - the Question

Drew meyer

Fri, 1 Jul 2011 08:42:47 -0500

28 lines

Re: NTC Friday Element Quiz - the Question

Stadem, Richard D.

Fri, 1 Jul 2011 08:34:14 -0500

181 lines

NTC Friday Element Quiz - the Question

David D. Hillman

Fri, 1 Jul 2011 07:07:51 -0500

142 lines

New Thread

PCB dielectric - 2 layers prepreg

PCB dielectric - 2 layers prepreg

Tan Geok Ang

Mon, 1 Aug 2011 09:50:17 +0800

40 lines

New Thread

Poor gold plating, any solution to help soldering

Re: Poor gold plating, any solution to help soldering

Jean-Francois Bissonnette

Wed, 6 Jul 2011 16:45:06 -0400

169 lines

Re: Poor gold plating, any solution to help soldering

Phil Bavaro

Wed, 6 Jul 2011 13:28:58 -0700

113 lines

Re: Poor gold plating, any solution to help soldering

Reuven Rokah

Wed, 6 Jul 2011 23:03:51 +0300

116 lines

Re: Poor gold plating, any solution to help soldering

vladimir Igoshev

Wed, 6 Jul 2011 19:53:16 +0000

67 lines

Poor gold plating, any solution to help soldering

Jean-Francois Bissonnette

Wed, 6 Jul 2011 15:37:02 -0400

59 lines

New Thread

Pre-preg

Re: Pre-preg

Steven Kelly

Fri, 15 Jul 2011 10:55:58 -0500

74 lines

Pre-preg

Steven Kelly

Fri, 15 Jul 2011 10:15:36 -0500

29 lines

New Thread

Query on Plasma Desmearing

Re: Query on Plasma Desmearing

Pete Menuez

Fri, 29 Jul 2011 08:12:10 -0400

75 lines

Re: Query on Plasma Desmearing

Chris Mahanna

Thu, 28 Jul 2011 13:30:11 -0400

77 lines

Re: Query on Plasma Desmearing

Chuck Brummer

Thu, 28 Jul 2011 10:27:42 -0700

127 lines

Query on Plasma Desmearing

Uppina Nagaraj

Thu, 28 Jul 2011 22:30:48 +0530

59 lines

New Thread

Requirement to PTH Mount Power Resistors Above PWB Surface

Re: Requirement to PTH Mount Power Resistors Above PWB Surface

Technet Legg

Thu, 28 Jul 2011 07:23:40 -0500

27 lines

Re: Requirement to PTH Mount Power Resistors Above PWB Surface

Robert Kondner

Wed, 27 Jul 2011 16:33:23 -0400

120 lines

Re: Requirement to PTH Mount Power Resistors Above PWB Surface

Stadem, Richard D.

Wed, 27 Jul 2011 14:51:24 -0500

114 lines

Re: Requirement to PTH Mount Power Resistors Above PWB Surface

Bob Sheldon

Wed, 27 Jul 2011 12:47:50 -0700

84 lines

Re: Requirement to PTH Mount Power Resistors Above PWB Surface

Jeff Popp

Wed, 27 Jul 2011 19:12:02 +0000

82 lines

Requirement to PTH Mount Power Resistors Above PWB Surface

Richard D. Krug

Wed, 27 Jul 2011 12:37:46 -0400

39 lines

New Thread

Rework from cut and jump

Re: Rework from cut and jump

Steve Gregory

Fri, 29 Jul 2011 18:53:08 -0400

108 lines

Rework from cut and jump

Frank Kimmey

Fri, 29 Jul 2011 13:36:45 -0700

43 lines

New Thread

Select solder process development

Select solder process development

Gervascio, Thomas L

Thu, 14 Jul 2011 08:56:31 -0400

82 lines

New Thread

Silver embrittelment in solder joints

Re: Silver embrittelment in solder joints

vladimir Igoshev

Sat, 16 Jul 2011 14:44:35 +0000

155 lines

Re: Silver embrittelment in solder joints

Gabriela

Sat, 16 Jul 2011 17:17:52 +0300

203 lines

Re: Silver embrittelment in solder joints

Guy Ramsey

Fri, 15 Jul 2011 09:19:11 -0400

157 lines

Re: Silver embrittelment in solder joints

David D. Hillman

Fri, 15 Jul 2011 07:36:58 -0500

124 lines

Re: Silver embrittelment in solder joints

vladimir Igoshev

Fri, 15 Jul 2011 11:55:58 +0000

75 lines

Re: Silver embrittelment in solder joints

Glidden, Kevin

Fri, 15 Jul 2011 06:46:38 -0400

95 lines

Silver embrittelment in solder joints

Gabriela

Fri, 15 Jul 2011 10:38:56 +0300

49 lines

New Thread

Solderpaste Storage and Use

Re: Solderpaste Storage and Use

Blair Hogg

Tue, 5 Jul 2011 07:16:05 -0500

62 lines

Re: Solderpaste Storage and Use

Frederick Miller

Tue, 5 Jul 2011 07:00:20 -0400

323 lines

Re: Solderpaste Storage and Use

Victor Hernandez

Tue, 5 Jul 2011 05:42:04 -0500

296 lines

Re: Solderpaste Storage and Use

Andrzej Zielinski

Fri, 1 Jul 2011 23:54:15 +0000

186 lines

Re: Solderpaste Storage and Use

Tan Geok Ang

Fri, 1 Jul 2011 18:50:21 -0500

275 lines

Re: Solderpaste Storage and Use

Robert Kondner

Fri, 1 Jul 2011 19:18:40 -0400

296 lines

Re: Solderpaste Storage and Use

Paul Edwards

Fri, 1 Jul 2011 15:30:12 -0700

330 lines

Re: Solderpaste Storage and Use

Steve Gregory

Fri, 1 Jul 2011 18:34:16 -0400

268 lines

Re: Solderpaste Storage and Use

Mike Fenner

Fri, 1 Jul 2011 22:38:44 +0100

236 lines

New Thread

Stepped stencils - Is there a limit?

Re: Stepped stencils - Is there a limit?

Gumpert, Ben

Mon, 18 Jul 2011 08:29:00 -0400

106 lines

Re: Stepped stencils - Is there a limit?

Reuven Rokah

Thu, 14 Jul 2011 11:10:37 +0300

79 lines

Re: Stepped stencils - Is there a limit?

Nowland, Russell Howard (Russell)

Wed, 13 Jul 2011 10:14:43 -0500

111 lines

Stepped stencils - Is there a limit?

Gumpert, Ben

Wed, 13 Jul 2011 10:41:57 -0400

39 lines

New Thread

Surface Finish for Breath

Re: Surface Finish for Breath

Kenneth J. Wood

Tue, 12 Jul 2011 08:50:07 -0400

110 lines

Re: Surface Finish for Breath

Stadem, Richard D.

Tue, 12 Jul 2011 07:40:13 -0500

73 lines

Re: Surface Finish for Breath

Blair Hogg

Tue, 12 Jul 2011 07:31:52 -0500

72 lines

Re: Surface Finish for Breath

Kenneth J. Wood

Mon, 11 Jul 2011 20:55:58 -0400

145 lines

Re: Surface Finish for Breath

Steve Gregory

Mon, 11 Jul 2011 20:50:50 -0400

117 lines

Re: Surface Finish for Breath

Joyce Koo

Mon, 11 Jul 2011 20:23:44 -0400

86 lines

Surface Finish for Breath

Kenneth J. Wood

Mon, 11 Jul 2011 20:18:26 -0400

41 lines

New Thread

Test LABS that Perform Surface Tension Measurements on Liquids

Re: Test LABS that Perform Surface Tension Measurements on Liquids

Phil Kinner

Thu, 14 Jul 2011 23:31:04 +0100

90 lines

Test LABS that Perform Surface Tension Measurements on Liquids

Richard Kraszewski

Thu, 14 Jul 2011 13:27:51 -0500

36 lines

New Thread

Thin Film Ceramic Resistor, 51K, serpentine

Thin Film Ceramic Resistor, 51K, serpentine

Victor Hernandez

Fri, 1 Jul 2011 09:58:45 -0500

38 lines

New Thread

To all stencils expert out there

Re: To all stencils expert out there

Rex Waygood

Fri, 1 Jul 2011 07:11:08 -0500

83 lines

New Thread

Wire Twists per inch

Re: Wire Twists per inch

Stadem, Richard D.

Wed, 27 Jul 2011 11:09:42 -0500

95 lines

Re: Wire Twists per inch

Frederick Miller

Wed, 27 Jul 2011 11:57:02 -0400

107 lines

Wire Twists per inch

Forrester, Michael (H USA)

Wed, 27 Jul 2011 11:31:44 -0400

62 lines

New Thread

Wire Twists per inch (clause 3.4 of A-620A)

Re: Wire Twists per inch (clause 3.4 of A-620A)

Jack Crawford

Wed, 27 Jul 2011 17:17:01 -0500

104 lines

New Thread

[Norton AntiSpam]Re: [TN] Stepped stencils - Is there a limit?

Re: [Norton AntiSpam]Re: [TN] Stepped stencils - Is there a limit?

Ahne Oosterhof

Fri, 15 Jul 2011 19:55:21 -0700

80 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager