LISTSERV - TGASIA Archives - LISTSERV.IPC.ORG

TGASIA Archives

May 2011

TGAsia@IPC.ORG

	LISTSERV Archives
	TGASIA Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Subject	From	Date
张怀儒107754 不在办公室。5月31－6月4日出差，紧急事情打手机，谢谢！	Zhang Huairu	Tue, 31 May 2011 20:07:53 +0800
答复: 有铅无铅手工焊的铬铁温度如何定义	Leo YANG	Tue, 31 May 2011 04:03:04 -0500
Re: 答复: [RMX:##] RE: [TGAsia] 回流炉中焊接的应力测试	Sonic Lu	Tue, 31 May 2011 14:43:13 +0800
Re: TGAsia将成立5-31CN技术组，现招募成员开发IPC-CH-65中文版	zhidong.chen	Tue, 31 May 2011 14:03:11 +0800
答复: 有铅无铅手工焊的铬铁温度如何定义	Billy SHEN	Tue, 31 May 2011 00:48:29 -0500
答复: [RMX:##] RE: [TGAsia] 回流炉中焊接的应力测试	Peng Yunjun	Tue, 31 May 2011 12:14:44 +0800
TGAsia将成立5-31CN技术组，现招募成员开发IPC-CH-65中文版	Charlotte "Yu" HAO	Mon, 30 May 2011 22:23:09 -0500
答复: 有铅无铅手工焊的铬铁温度如何定义	LiHong MENG	Mon, 30 May 2011 21:50:54 -0500
转发: 有铅无铅手工焊的铬铁温度如何定义	徐亮	Tue, 31 May 2011 10:35:52 +0800
有铅无铅手工焊的铬铁温度如何定义	徐亮	Tue, 31 May 2011 10:29:23 +0800
Re: 有关三防喷胶遮蔽用美纹纸胶带ESD问题	Liu, Jeff	Mon, 30 May 2011 07:13:22 +0000
Re: 有关三防喷胶遮蔽用美纹纸胶带ESD问题	JiaXing LIU	Mon, 30 May 2011 15:03:15 +0800
Re: 有关三防喷胶遮蔽用美纹纸胶带ESD问题	Liu, Jeff	Mon, 30 May 2011 03:42:41 +0000
Re: 有关三防喷胶遮蔽用美纹纸胶带ESD问题	Sonic Lu	Mon, 30 May 2011 11:38:21 +0800
Re: 答复: [TGAsia] 波峰焊后AOI设备	Wang Xiaojin (AE/MOE2.2-CN)	Mon, 30 May 2011 10:41:13 +0800
答复: [TGAsia] 波峰焊后AOI设备	Jessy Lai	Mon, 30 May 2011 10:38:26 +0800
波峰焊后AOI设备	Wen Zhong 钟文	Mon, 30 May 2011 10:20:27 +0800
有关三防喷胶遮蔽用美纹纸胶带ESD问题	Liu, Jeff	Mon, 30 May 2011 01:48:36 +0000
答复: Re: [TGAsia] 答复: [TGAsia] FR4 表面粗糙度问题	Jeff Chen	Fri, 27 May 2011 16:49:38 +0800
Re: 湿敏元器件管控	Rhoda Yao	Fri, 27 May 2011 16:47:19 +0800
Re: 湿敏元器件管控	sungaixian_007	Fri, 27 May 2011 13:56:17 +0800
Re: 关于SMT试印刷用的薄膜	Richard Xia-7950CE	Fri, 27 May 2011 13:43:16 +0800
Re: 湿敏元器件管控	Bachelor Ge	Fri, 27 May 2011 13:31:09 +0800
答复: 关于SMT试印刷用的薄膜	郑立鹤	Fri, 27 May 2011 04:34:47 +0000
关于SMT试印刷用的薄膜	Richard Xia-7950CE	Fri, 27 May 2011 10:02:13 +0800
有关IPC-9702一些规范的疑问	Bentley(沈斌)-MEMS	Fri, 27 May 2011 09:56:07 +0800
Re: Regarding SMT01005 process.	Jake Tu	Fri, 27 May 2011 08:59:38 +0800
Re: 锡膏印刷后检验标准	Liu, Jeff	Fri, 27 May 2011 00:53:59 +0000
Re: 答复: [TGAsia] FR4 表面粗糙度问题	sungaixian_007	Fri, 27 May 2011 08:51:37 +0800
答复: [TGAsia] FR4 表面粗糙度问题	Jeff Chen	Thu, 26 May 2011 17:32:06 +0800
锡膏印刷后检验标准	Jakey Chen	Thu, 26 May 2011 08:41:24 +0000
Re: Burr after V- cut	Vince Tian	Thu, 26 May 2011 06:28:41 +0000
Re: Burr after V- cut	DAPPER_CHEN (b ��建明)	Thu, 26 May 2011 14:24:17 +0800
Re: Burr after V- cut	Fairy Wang	Thu, 26 May 2011 14:05:11 +0800
Burr after V- cut	Li Maggie (AE/MOE1.24-CN)	Thu, 26 May 2011 11:59:26 +0800
FR4 表面粗糙度问题	sungaixian_007	Thu, 26 May 2011 11:52:46 +0800
Regarding SMT01005 process.	Jake Tu	Thu, 26 May 2011 10:05:25 +0800
张怀儒107754 不在办公室。5月25－5月27日出差，紧急事情打手机，谢谢！	Zhang Huairu	Wed, 25 May 2011 17:44:52 +0800
Re: 答复: [TGAsia] 支撑孔和非支撑孔的定义	Iris Liu	Wed, 25 May 2011 14:57:50 +0800
IPC as Technical Sponsor for ASQED 2011, Kuala Lumpur, Malaysia	IPC as Technical Sponsor ASQED 2011	Wed, 25 May 2011 14:55:38 +0800
答复: IPC挠性印制板技术讲座意见征询	Leesha "Lixia" PENG	Tue, 24 May 2011 22:47:35 -0500
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	wubosz	Wed, 25 May 2011 10:43:28 +0800
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	Sonic Lu	Wed, 25 May 2011 10:34:18 +0800
Re: IPC挠性印制板技术讲座意见征询	KA10_曾松裕(Sam.Tseng)	Wed, 25 May 2011 10:20:26 +0800
IPC挠性印制板技术讲座意见征询	Paul ZONG	Tue, 24 May 2011 21:14:42 -0500
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	IMI LI, Han Hong	Wed, 25 May 2011 09:29:26 +0800
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些?匝椋?	JiaXing LIU	Wed, 25 May 2011 09:28:38 +0800
Re: sink current	George	Wed, 25 May 2011 09:23:38 +0800
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	wubosz	Tue, 24 May 2011 22:12:59 +0800
Re: 各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	Sonic Lu	Tue, 24 May 2011 17:35:51 +0800
各位，认证一款清洗PCB的清洗剂通常需要做哪些试验？	IMI LI, Han Hong	Tue, 24 May 2011 16:53:05 +0800
Re: sink current	Cheah Soo Lan	Tue, 24 May 2011 15:54:23 +0800
Re: 答复: [TGAsia] 支撑孔和非支撑孔的定义	Cheah Soo Lan	Tue, 24 May 2011 10:36:21 +0800
Re: 答复: Re: [TGAsia] 答复: [TGAsia] 支撑孔和非支撑孔的定义	Andrew Yu-0108CE	Tue, 24 May 2011 10:06:15 +0800
Re: 答复: Re: [TGAsia] 答复: [TGAsia] 支撑孔和非支撑孔的定义	Laya Chen	Tue, 24 May 2011 08:48:40 +0800
答复: Re: [TGAsia] 答复: [TGAsia] 支撑孔和非支撑孔的定义	Jia Zhongzhong	Tue, 24 May 2011 08:23:04 +0800
Re: 答复: [TGAsia] 支撑孔和非支撑孔的定义	ChenBruce	Mon, 23 May 2011 23:37:15 +0800
sink current	George	Mon, 23 May 2011 17:37:04 +0800
答复: [TGAsia] 支撑孔和非支撑孔的定义	Dl Bai	Mon, 23 May 2011 16:38:58 +0800
Re: 支撑孔和非支撑孔的定义	Lucia (Yan) Jin	Mon, 23 May 2011 15:32:03 +0800
答复: [TGAsia] 支撑孔和非支撑孔的定义	Wen Zhong 钟文	Mon, 23 May 2011 15:22:17 +0800
Re: 支撑孔和非支撑孔的定义	Sonic Lu	Mon, 23 May 2011 15:18:24 +0800
支撑孔和非支撑孔的定义	Andy Zhang	Mon, 23 May 2011 14:52:19 +0800
Re: 答复: [TGAsia] 回流炉中焊接的应力测试	Sonic Lu	Mon, 23 May 2011 12:29:05 +0800
Reply:[TGAsia] COB 行业联盟	qiemail	Fri, 20 May 2011 15:56:48 +0800
COB 行业联盟	George Tian	Fri, 20 May 2011 15:46:03 +0800
Re: 回流炉中焊接的应力测试	Sonic Lu	Fri, 20 May 2011 12:46:42 +0800
Re: FW: [TGAsia] 怎么加入到《 SMTCOB行业联盟》	Sonic Lu	Fri, 20 May 2011 12:45:18 +0800
答复: [TGAsia] 答复: [TGAsia] 回流炉中焊接的应力测试	Jason Hou(侯昌锦)	Fri, 20 May 2011 10:46:50 +0800
答复: [TGAsia] 回流炉中焊接的应力测试	sungaixian	Fri, 20 May 2011 10:07:08 +0800
Re: 回流炉中焊接的应力测试	Justin Wu	Fri, 20 May 2011 10:04:23 +0800
答复: [RMX:#] Re: [TGAsia] 回流炉中焊接的应力测试	Peng Yunjun	Fri, 20 May 2011 09:57:54 +0800
Re: 回流炉中焊接的应力测试	Rocky Wang	Fri, 20 May 2011 09:31:53 +0800
FW: [TGAsia] 怎么加入到《 SMTCOB行业联盟》	Season QA	Fri, 20 May 2011 09:27:04 +0800
怎么加入到《 SMTCOB行业联盟》	qiemail	Thu, 19 May 2011 20:17:53 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] Pin脚直径与PTH孔径的关系	Shijun_Tang (b 唐仕俊)	Thu, 19 May 2011 16:01:47 +0800
回流炉中焊接的应力测试	Peng Yunjun	Thu, 19 May 2011 09:43:35 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Sonic Lu	Wed, 18 May 2011 14:42:16 +0800
Re: Pin脚直径与PTH孔径的关系	YanQiong Wu	Wed, 18 May 2011 07:53:31 +0800
Re: 答复: [TGAsia] 湿敏元器件管控	ChenBruce	Tue, 17 May 2011 22:53:42 +0800
Re: Pin脚直径与PTH孔径的关系	ChenBruce	Tue, 17 May 2011 22:49:20 +0800
张怀儒107754 不在办公室。5月17－5月19日出差，紧急事情打手机，谢谢！	Zhang Huairu	Tue, 17 May 2011 17:48:53 +0800
IPC 2011年“热魔”杯手工焊接竞赛-华东赛区圆满结束	Paul ZONG	Tue, 17 May 2011 03:48:28 -0500
Re: Pin脚直径与PTH孔径的关系	Lewis Liu	Tue, 17 May 2011 11:23:39 +0800
Analysis	KA10_曾松裕(Sam.Tseng)	Tue, 17 May 2011 10:23:33 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] ??: Analysis	DAPPER_CHEN (b ��建明)	Tue, 17 May 2011 10:04:41 +0800
答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Wen Zhong 钟文	Tue, 17 May 2011 09:58:28 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	shi hongbin	Tue, 17 May 2011 10:43:40 +0900
Re: 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	shi hongbin	Tue, 17 May 2011 10:39:29 +0900
答复: Re: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] ??: Analysis	Peng Yunjun	Mon, 16 May 2011 18:55:59 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] ??: Analysis	Sharp_zhang(b ��i宇)	Mon, 16 May 2011 18:46:54 +0800
答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 18:41:43 +0800
Re: 更换陶瓷电容的方法	Tongkan(b 童刊)	Mon, 16 May 2011 17:31:39 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Bing_Xiong (b 熊建斌)	Mon, 16 May 2011 16:02:03 +0800
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Wen Zhong 钟文	Mon, 16 May 2011 15:52:57 +0800
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Eric Zhang(张力) CTI	Mon, 16 May 2011 15:49:28 +0800
Re: 答复: [TGAsia] 转发: Analysis	Bing_Xiong (b 熊建斌)	Mon, 16 May 2011 15:38:27 +0800
答复: [TGAsia] 答复: [TGAsia] Pin脚直径与PTH孔径的关系	Peng Yunjun	Mon, 16 May 2011 15:26:37 +0800
Re: 答复: Re: [TGAsia] 转发: Analysis	Sonic Lu	Mon, 16 May 2011 15:24:19 +0800
答复: Re: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 15:10:46 +0800
Re: Analysis	Sonic Lu	Mon, 16 May 2011 14:33:30 +0800
Re: 答复: [TGAsia] 中国现状	Peter Zhou	Mon, 16 May 2011 14:27:02 +0800
答复: [TGAsia] 中国现状	Paul ZONG	Mon, 16 May 2011 00:58:23 -0500
中国现状	[K.S] QE/CN	Mon, 16 May 2011 13:43:06 +0800
Analysis	LiHong MENG	Mon, 16 May 2011 00:42:56 -0500
Re: 更换陶瓷电容的方法	shi hongbin	Mon, 16 May 2011 14:17:57 +0900
Re: 答复: [TGAsia] 转发: Analysis	zhidong.chen	Mon, 16 May 2011 12:40:21 +0800
Re: 答复: [TGAsia] 转发: Analysis	zhidong.chen	Mon, 16 May 2011 12:38:25 +0800
答复: [TGAsia] 答复: Re: [TGAsia] 答复: Re: [TGAsia] 答复: [TGAsia] 转发: Analysis	Leesha "Lixia" PENG	Sun, 15 May 2011 23:21:01 -0500
答复: Re: [TGAsia] 答复: Re: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 12:14:34 +0800
Re: 转发: Analysis	Snow Fu	Mon, 16 May 2011 12:12:51 +0800
答复: [TGAsia] 答复: Re: [TGAsia] 答复: [TGAsia] 转发: Analysis	Wen Zhong 钟文	Mon, 16 May 2011 12:12:42 +0800
Re: 答复: Re: [TGAsia] 答复: [TGAsia] 转发: Analysis	shi hongbin	Mon, 16 May 2011 13:05:43 +0900
答复: [TGAsia] Pin脚直径与PTH孔径的关系	Wen Zhong 钟文	Mon, 16 May 2011 12:03:37 +0800
答复: Re: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 11:43:22 +0800
答复: [TGAsia] 转发: Analysis	Eric Zhang(张力) CTI	Mon, 16 May 2011 11:37:40 +0800
Re: Pin脚直径与PTH孔径的关系	Jake Tu	Mon, 16 May 2011 11:33:57 +0800
Re: 答复: [TGAsia] 转发: Analysis	zhidong.chen	Mon, 16 May 2011 11:22:50 +0800
Re: 答复: [RMX:#] RE: [TGAsia] 转发: Analysis	zhidong.chen	Mon, 16 May 2011 11:19:01 +0800
答复: [TGAsia] 转发: Analysis	郑立鹤	Mon, 16 May 2011 02:45:08 +0000
Re: 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	shi hongbin	Mon, 16 May 2011 11:31:50 +0900
Re: 答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Sonic Lu	Mon, 16 May 2011 10:27:16 +0800
Re: 答复: [RMX:#] RE: [TGAsia] 转发: Analysis	Sonic Lu	Mon, 16 May 2011 10:24:24 +0800
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 10:08:44 +0800
Re: [RMX:#] RE: [TGAsia] 转发: Analysis	shi hongbin	Mon, 16 May 2011 11:04:38 +0900
Re: [RMX:#] RE: [TGAsia] 转发: Analysis	Yore Qi	Mon, 16 May 2011 01:53:46 +0000
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 09:49:06 +0800
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Leesha "Lixia" PENG	Sun, 15 May 2011 20:40:28 -0500
Re: deep gold工?	Sharp_zhang(b ��i宇)	Mon, 16 May 2011 09:36:31 +0800
Re: 答复: [TGAsia] 转发: Analysis	airmy(b ��冬��)	Mon, 16 May 2011 09:35:09 +0800
Re: 转发: Analysis	Johnny Chen	Mon, 16 May 2011 09:30:00 +0800
Re: deep gold工?	Eliot Chen	Mon, 16 May 2011 01:27:43 +0000
Re: 转发: Analysis	Sonic Lu	Mon, 16 May 2011 09:26:08 +0800
答复: [RMX:#] RE: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 09:23:46 +0800
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Wen Zhong 钟文	Mon, 16 May 2011 09:23:15 +0800
Re: 转发: Analysis	Yore Qi	Mon, 16 May 2011 01:20:36 +0000
Re: 答复: [TGAsia] 转发: Analysis	zhidong.chen	Mon, 16 May 2011 09:11:48 +0800
Re: 答复: [TGAsia] 转发: Analysis	Sonic Lu	Mon, 16 May 2011 09:06:39 +0800
答复: [TGAsia] 转发: Analysis	Leesha "Lixia" PENG	Sun, 15 May 2011 19:51:21 -0500
答复: [TGAsia] 答复: [TGAsia] 转发: Analysis	Peng Yunjun	Mon, 16 May 2011 08:29:39 +0800
答复: [TGAsia] 转发: Analysis	Wen Zhong 钟文	Mon, 16 May 2011 08:12:58 +0800
转发: Analysis	Peng Yunjun	Sun, 15 May 2011 14:04:20 +0800
Re: 回信: Re: [TGAsia] 請各SMT高手�隻ㄓ尷R。	Minhua Zhao	Sat, 14 May 2011 13:03:14 +0000
Re: metal substrates board	Patricia	Sat, 14 May 2011 15:25:01 +0800
Re: deep gold工?	Sharp_zhang(b ��i宇)	Sat, 14 May 2011 14:50:04 +0800
Re: deep gold工艺	chen	Fri, 13 May 2011 20:47:06 +0800
Re: deep gold工艺	�S志宏 ��理 Leo	Fri, 13 May 2011 19:47:29 +0800
Re: deep gold工艺	Yu, Gary	Fri, 13 May 2011 08:46:39 +0000
Re: 回信: Re: [TGAsia] ��各SMT高手�兔Ψ治觥�	AceKoo	Fri, 13 May 2011 16:26:43 +0800
答复: Re: [TGAsia] deep gold工艺	TungKueng Yiu	Fri, 13 May 2011 16:14:05 +0800
答复: [TGAsia] 回信: Re: [TGAsia] ��各SMT高手�兔Ψ治觥�	Jessy Lai	Fri, 13 May 2011 16:13:12 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	zgfeng	Fri, 13 May 2011 16:04:59 +0800
Re: deep gold工艺	zgfeng	Fri, 13 May 2011 15:57:46 +0800
Re: 回信: Re: [TGAsia] 請各SMT高手幫忙分析。	Sonic Lu	Fri, 13 May 2011 15:57:44 +0800
回信: Re: [TGAsia] 請各SMT高手幫忙分析。	Divas J.X. Liu	Fri, 13 May 2011 15:24:14 +0800
Re: metal substrates board	<>	Fri, 13 May 2011 13:56:07 +0800
metal substrates board	Patricia Lui	Fri, 13 May 2011 12:53:11 +0800
答复: [TGAsia] 湿敏元器件管控	Leesha "Lixia" PENG	Thu, 12 May 2011 07:50:11 -0500
Re: 哪里可以做FTIR分析？	Yin, Fiona	Thu, 12 May 2011 00:43:39 -0500
答复: [TGAsia] 哪里可以做FTIR分析？	Gary Cheng	Thu, 12 May 2011 13:26:00 +0800
答复: [TGAsia] 湿敏元器件管控	Leo YANG	Thu, 12 May 2011 00:12:51 -0500
答复: 哪里可以做FTIR分析？	Delstone Zhang(张伟) CTI	Thu, 12 May 2011 12:54:27 +0800
哪里可以做FTIR分析？	Yin, Fiona	Wed, 11 May 2011 23:42:38 -0500
答复: [TGAsia] 请教SMT车间等场所的温湿度标准	Leo YANG	Wed, 11 May 2011 22:56:27 -0500
答复: [TGAsia] 请教SMT车间等场所的温湿度标准	Charlotte "Yu" HAO	Wed, 11 May 2011 21:49:48 -0500
答复: [TGAsia] 湿敏元器件管控	郑立鹤	Thu, 12 May 2011 02:25:04 +0000
Re: PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Tan Geok Ang	Thu, 12 May 2011 09:45:30 +0800
Re: PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	David Lau	Thu, 12 May 2011 01:24:34 +0000
湿敏元器件管控	AceKoo	Thu, 12 May 2011 09:20:24 +0800
Re: 请教SMT车间等场所的温湿度标准	WM-FQA-Zhao ZiDe	Thu, 12 May 2011 07:58:25 +0800
请教SMT车间等场所的温湿度标准	刘英	Wed, 11 May 2011 20:30:33 +0800
Re: 請各SMT高手幫忙分析。	李志伟	Wed, 11 May 2011 17:01:14 +0800
答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Jessy Lai	Wed, 11 May 2011 15:40:43 +0800
Re: ��各SMT高手�兔Ψ治觥�	Wilson Poon	Wed, 11 May 2011 15:36:27 +0800
請各SMT高手幫忙分析。	Divas J.X. Liu	Wed, 11 May 2011 15:28:21 +0800
Re: PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Wilson Poon	Wed, 11 May 2011 15:02:33 +0800
Re: PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Jeffrey -ARM	Wed, 11 May 2011 14:26:54 +0800
Re: PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	�S志宏 ��理 Leo	Wed, 11 May 2011 14:06:53 +0800
Re: PCBA後製程補漆規定	黃志宏經理 Leo	Wed, 11 May 2011 13:58:19 +0800
答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Jason Tang	Wed, 11 May 2011 13:46:32 +0800
Re: 答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Snow Fu	Wed, 11 May 2011 13:40:07 +0800
答复: [TGAsia] 答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Jason Tang	Wed, 11 May 2011 13:33:52 +0800
答复: [TGAsia] PCBA後�u程�a漆��定	TungKueng Yiu	Wed, 11 May 2011 13:32:59 +0800
答复: [TGAsia] 答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	TungKueng Yiu	Wed, 11 May 2011 13:23:51 +0800
答复: [TGAsia] PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Jason Tang	Wed, 11 May 2011 13:16:51 +0800
PCBA後製程補漆規定	Alexander Cheng(陳正貿_PSZ)	Wed, 11 May 2011 13:11:23 +0800
PCBA在conformal coating后PCB表面有桔皮现象, 产生的原因？按照IPC标准是否可以接收？	Snow Fu	Wed, 11 May 2011 13:04:57 +0800
Re: 请教各位，一般U盘（或USB key、无线网卡等）的外壳接缝、USB头和外壳的接缝，大小控制在多少比较合适？	Sonic Lu	Wed, 11 May 2011 11:42:04 +0800
答复: Re: [TGAsia] deep gold工艺	Andy Zhang	Wed, 11 May 2011 09:10:12 +0800
请教各位，一般U盘（或USB key、无线网卡等）的外壳接缝、USB头和外壳的接缝，大小控制在多少比较合适？	Zhang Yali	Wed, 11 May 2011 09:03:57 +0800
Re: deep gold工艺	Joseph Ho	Wed, 11 May 2011 08:27:34 +0800
Re: 答复: [TGAsia] 通孔回流工艺	sam_zou	Tue, 10 May 2011 20:58:00 +0800
Re: deep gold工艺	Tuscan Chu	Mon, 9 May 2011 16:44:11 +0800
deep gold工艺	Andy Zhang	Mon, 9 May 2011 16:21:00 +0800
答复: [TGAsia] 通孔回流工艺	Jessy Lai	Sun, 8 May 2011 21:59:44 -0500
Re: 通孔回流工艺	Rocky Wang	Mon, 9 May 2011 10:32:40 +0800
答复: 请教J-STD-033B中的问题！	Charlotte "Yu" HAO	Sun, 8 May 2011 21:25:45 -0500
请教J-STD-033B中的问题！	郑立鹤	Mon, 9 May 2011 01:59:03 +0000
尋SMT外包加工廠(距離20KM范圍以內)	Timi_Tong (B 湯國兵)	Thu, 5 May 2011 10:44:32 +0800
Re: UL webinar starts soon.	Yap, Stella (SMI)	Thu, 5 May 2011 08:39:57 +0800
UL webinar starts soon.	David Bergman	Wed, 4 May 2011 17:44:01 -0500
Re: 执锡时的ESD 防护要求	wubosz	Wed, 4 May 2011 20:19:21 +0800
Re: 执锡时的ESD 防护要求	Sonic Lu	Wed, 4 May 2011 16:59:46 +0800
答复: [TGAsia] 执锡时的ESD 防护要求	郑立鹤	Wed, 4 May 2011 08:54:50 +0000
执锡时的ESD 防护要求	Frank Xiong	Wed, 4 May 2011 16:34:50 +0800
张怀儒107754 不在办公室。5月4－5月10日出差，工作委托杨德昌处理，紧急事情打手机，谢谢！	Zhang Huairu	Wed, 4 May 2011 16:08:53 +0800
Re: 回流焊接温度	Sonic Lu	Wed, 4 May 2011 15:02:52 +0800
回流焊接温度	郑立鹤	Wed, 4 May 2011 05:49:59 +0000
欢迎观摩苏州地区IPC 2011年“热魔杯”手工焊接竞赛	Paul ZONG	Tue, 3 May 2011 22:42:36 -0500
通孔回流工艺	Rocky Wang	Tue, 3 May 2011 19:02:44 +0800
答复: Re:[TGAsia] SMT钢网厂家	JiaXing LIU	Tue, 3 May 2011 11:24:03 +0800
Re: 答复: Re:[TGAsia] SMT钢网厂家	airmy(b ��冬��)	Tue, 3 May 2011 11:10:32 +0800
答复: [TGAsia] 答复: [TGAsia] SMT?网厂家	Jessy Lai	Tue, 3 May 2011 11:01:25 +0800
Re: 答复: [TGAsia] SMT?网厂家	Sharp_zhang(b ��i宇)	Tue, 3 May 2011 10:58:24 +0800
答复: Re:[TGAsia] SMT钢网厂家	郑立鹤	Tue, 3 May 2011 02:58:09 +0000
Re: SMT钢网厂家	David Lau	Tue, 3 May 2011 02:47:15 +0000
Re: 答复: Re:[TGAsia] SMT钢网厂家	Peter Zhou	Tue, 3 May 2011 10:40:22 +0800
答复: [TGAsia] SMT钢网厂家	Jessy Lai	Tue, 3 May 2011 10:37:02 +0800
答复: Re:[TGAsia] SMT钢网厂家	Wen Zhong 钟文	Tue, 3 May 2011 10:32:58 +0800
Re: SMT钢网厂家	David Lau	Tue, 3 May 2011 02:25:45 +0000
答复: Re:[TGAsia] SMT钢网厂家	郑立鹤	Tue, 3 May 2011 02:17:25 +0000

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

TGASIA Archives

May 2011

TGAsia@IPC.ORG

Subject

From

Date