LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


April 2011


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith (8 messages)
"X" RE: [TN] Werner (3 messages)
<No subject> (1 message)
Aqueous Wash, DI water and IPC Specifications. (15 messages)
Baking Hi-Power LEDs (1 message)
BGA Ball Tilt (7 messages)
BGA on Solder Side (5 messages)
BGA X-Ray - 2D (4 messages)
castellated hole spec (1 message)
Class 0 ESDS board assembly transport... (13 messages)
Contact search (3 messages)
Cracked ceramic capacitors (10 messages)
Definition (6 messages)
DI water and plating (4 messages)
Die bonding requirements (7 messages)
Dispensing of Peelable Soldermask (10 messages)
Engelmaier on-line obiturary from Global SMT - where Werner was a columnist. (1 message)
ESD safe ID Badge Holders (9 messages)
EXT :Re: [TN] Sad news about Werner Engelmaier (1 message)
EXTERNAL: [TN] LGA geometry advice (2 messages)
EXTERNAL: [TN] terminology (1 message)
Gluing of resistor on the PCB - IPC-A-610 class 3 compliance (4 messages)
Gluing of SMT pads (2 messages)
hole sizes (5 messages)
Immersion/Electroless Palladium as final finish? (4 messages)
IPC webinar on FR-4 CCL Reclassification Explained 4-May US/5-May Asia (1 message)
IPC-A-610, Solder on gold fingers - Inspection/Acceptability (9 messages)
laid off (17 messages)
Large/Thick boards and PnP (2 messages)
LGA geometry advice (15 messages)
Listserv Status April 5th (2 messages)
Listserv Upgrade - Status April 4th (1 message)
Mixed bed resin in deionizing tanks (2 messages)
NESTING (1 message)
No traffic (1 message)
NTC Friday Element Quiz - the Answer (9 messages)
NTC Friday Element Quiz - the Question (31 messages)
NTC Position Available (1 message)
NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith (2 messages)
Panel manufacturability (3 messages)
Peel strength Value (2 messages)
PK Metals - Molten Solder Surfactant (MS2(tm)) (1 message)
Please Remove Posts from Archives "Laid OFF" (1 message)
PWB Finish Specifications (3 messages)
Response from Werner Engelmaier's son, Peter (5 messages)
response to prevalidation for DLA (1 message)
Sad news about Werner Engelmaier (27 messages)
Sad news about Werner Engelmaier, Business in Scotland (1 message)
Solder Mask Touch Up (2 messages)
Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK? (7 messages)
sorry... (1 message)
Spare Part and Maintainence Cost Approximation (3 messages)
Stencil Thickness (6 messages)
Still dealing with Listserv upgrade (1 message)
Surface Mount technology, Rectangular passive components (mostly resistors and capacitors): (3 messages)
Tape and Reel Specification (5 messages)
terminology (4 messages)
terminology _ PCA support for P&P (1 message)
Trace repair, need material source (1 message)
UL and Bare Board Fabrication (1 message)
Update - Listserv Upgrade (3 messages)
Vertical solder fill for component with thermal pad. (5 messages)
Werner (1 message)
White solder mask discoloration (14 messages)
[TechNet] DI water and plating (9 messages)
[TechNet] NTC Friday Element Quiz - the Answer (1 message)
[TN] NTC Friday Element Quiz - the Question (1 message)
[TN] Spare Part and Maintainence Cost Approximation (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

"The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

"The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Graham Collins <[log in to unmask]>

Fri, 29 Apr 2011 13:15:05 -0300

55 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Phil Bavaro <[log in to unmask]>

Fri, 29 Apr 2011 11:13:51 -0700

103 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Victor Hernandez <[log in to unmask]>

Fri, 29 Apr 2011 13:21:13 -0500

134 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Graham Collins <[log in to unmask]>

Fri, 29 Apr 2011 15:23:16 -0300

106 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Gregg Owens <[log in to unmask]>

Fri, 29 Apr 2011 11:22:32 -0700

142 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 29 Apr 2011 11:32:17 -0700

137 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Brian Ellis <[log in to unmask]>

Sat, 30 Apr 2011 09:08:10 +0300

129 lines

Re: "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Goodyear, Patrick <[log in to unmask]>

Sat, 30 Apr 2011 21:20:58 -0700

133 lines

New Thread

"X" RE: [TN] Werner

"X" RE: [TN] Werner

Victor Hernandez <[log in to unmask]>

Mon, 18 Apr 2011 07:24:12 -0500

44 lines

Re: "X" RE: [TN] Werner

Drew meyer <[log in to unmask]>

Tue, 19 Apr 2011 08:47:13 -0500

29 lines

Re: "X" RE: [TN] Werner

Blair Hogg <[log in to unmask]>

Tue, 19 Apr 2011 14:44:54 -0500

27 lines

New Thread

<No subject>

<No subject>

ken barton <[log in to unmask]>

Mon, 18 Apr 2011 07:51:14 -0700

35 lines

New Thread

Aqueous Wash, DI water and IPC Specifications.

Aqueous Wash, DI water and IPC Specifications.

Forrester, Michael (H USA) <[log in to unmask]>

Thu, 21 Apr 2011 15:36:15 -0400

79 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Woolley, Mark D. (Mark) <[log in to unmask]>

Thu, 21 Apr 2011 14:56:50 -0600

122 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Forrester, Michael (H USA) <[log in to unmask]>

Thu, 21 Apr 2011 17:06:13 -0400

161 lines

Re: Aqueous Wash, DI water and IPC Specifications.

David Bealer <[log in to unmask]>

Thu, 21 Apr 2011 16:55:43 -0500

207 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Forrester, Michael (H USA) <[log in to unmask]>

Thu, 21 Apr 2011 18:16:34 -0400

262 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Karen Tellefsen <[log in to unmask]>

Thu, 21 Apr 2011 18:40:18 -0400

319 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Robert Kondner <[log in to unmask]>

Thu, 21 Apr 2011 18:46:26 -0400

300 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Brian Ellis <[log in to unmask]>

Fri, 22 Apr 2011 09:15:03 +0300

382 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Karen Tellefsen <[log in to unmask]>

Fri, 22 Apr 2011 08:56:35 -0400

361 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Brian Ellis <[log in to unmask]>

Fri, 22 Apr 2011 16:31:59 +0300

447 lines

Re: Aqueous Wash, DI water and IPC Specifications.

David Bealer <[log in to unmask]>

Mon, 25 Apr 2011 07:17:01 -0500

294 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Douglas Pauls <[log in to unmask]>

Mon, 25 Apr 2011 07:58:48 -0500

348 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Brian Ellis <[log in to unmask]>

Mon, 25 Apr 2011 17:20:02 +0300

385 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Douglas Pauls <[log in to unmask]>

Mon, 25 Apr 2011 11:37:37 -0500

452 lines

Re: Aqueous Wash, DI water and IPC Specifications.

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 25 Apr 2011 09:50:53 -0700

961 lines

New Thread

Baking Hi-Power LEDs

Baking Hi-Power LEDs

Jean-Francois Bissonnette <[log in to unmask]>

Thu, 7 Apr 2011 17:55:48 -0400

52 lines

New Thread

BGA Ball Tilt

BGA Ball Tilt

Woolley, Mark D. (Mark) <[log in to unmask]>

Wed, 27 Apr 2011 09:56:04 -0600

52 lines

Re: BGA Ball Tilt

Steve Gregory <[log in to unmask]>

Wed, 27 Apr 2011 12:03:27 -0400

82 lines

Re: BGA Ball Tilt

Steve Gregory <[log in to unmask]>

Wed, 27 Apr 2011 14:33:22 -0400

127 lines

Re: BGA Ball Tilt

vladimir Igoshev <[log in to unmask]>

Wed, 27 Apr 2011 18:48:53 +0000

111 lines

Re: BGA Ball Tilt

Phil Bavaro <[log in to unmask]>

Wed, 27 Apr 2011 11:49:42 -0700

198 lines

Re: BGA Ball Tilt

Stadem, Richard D. <[log in to unmask]>

Wed, 27 Apr 2011 14:02:38 -0500

238 lines

Re: BGA Ball Tilt

Woolley, Mark D. (Mark) <[log in to unmask]>

Wed, 27 Apr 2011 14:27:01 -0600

229 lines

New Thread

BGA on Solder Side

BGA on Solder Side

Leif Erik Laerum <[log in to unmask]>

Fri, 1 Apr 2011 13:11:16 -0500

52 lines

Re: BGA on Solder Side

Ioan Tempea <[log in to unmask]>

Fri, 1 Apr 2011 14:30:17 -0400

104 lines

Re: BGA on Solder Side

Post, Scott E <[log in to unmask]>

Fri, 1 Apr 2011 18:37:04 +0000

110 lines

Re: BGA on Solder Side

Phil Bavaro <[log in to unmask]>

Fri, 1 Apr 2011 12:16:00 -0700

138 lines

Re: BGA on Solder Side

Louis Hart <[log in to unmask]>

Fri, 1 Apr 2011 20:10:44 +0000

98 lines

New Thread

BGA X-Ray - 2D

BGA X-Ray - 2D

John Anselmo <[log in to unmask]>

Wed, 13 Apr 2011 13:53:15 -0600

41 lines

Re: BGA X-Ray - 2D

Jerry Dengler <[log in to unmask]>

Wed, 13 Apr 2011 15:56:52 -0400

78 lines

Re: BGA X-Ray - 2D

Diljit Matharu <[log in to unmask]>

Wed, 13 Apr 2011 13:01:24 -0700

112 lines

Re: BGA X-Ray - 2D

Ed Popielarski <[log in to unmask]>

Thu, 14 Apr 2011 08:46:18 -0700

110 lines

New Thread

castellated hole spec

castellated hole spec

Kenneth J. Wood <[log in to unmask]>

Tue, 12 Apr 2011 15:54:08 -0400

40 lines

New Thread

Class 0 ESDS board assembly transport...

Class 0 ESDS board assembly transport...

Steve Gregory <[log in to unmask]>

Sat, 9 Apr 2011 20:22:06 -0400

92 lines

Re: Class 0 ESDS board assembly transport...

Joyce Koo <[log in to unmask]>

Sat, 9 Apr 2011 20:41:41 -0400

117 lines

Re: Class 0 ESDS board assembly transport...

Steve Gregory <[log in to unmask]>

Sat, 9 Apr 2011 23:16:36 -0400

229 lines

Re: Class 0 ESDS board assembly transport...

Steve Gregory <[log in to unmask]>

Tue, 12 Apr 2011 11:55:47 -0400

43 lines

Re: Class 0 ESDS board assembly transport...

Richard D. Krug <[log in to unmask]>

Tue, 12 Apr 2011 12:03:29 -0400

65 lines

Re: Class 0 ESDS board assembly transport...

Steve Gregory <[log in to unmask]>

Tue, 12 Apr 2011 12:26:43 -0400

132 lines

Re: Class 0 ESDS board assembly transport...

Richard D. Krug <[log in to unmask]>

Tue, 12 Apr 2011 13:09:36 -0400

109 lines

Re: Class 0 ESDS board assembly transport...

Gene Felder <[log in to unmask]>

Tue, 12 Apr 2011 10:26:22 -0700

182 lines

Re: Class 0 ESDS board assembly transport...

Thayer, Wayne - IIW <[log in to unmask]>

Tue, 12 Apr 2011 13:33:04 -0400

251 lines

Re: Class 0 ESDS board assembly transport...

Stadem, Richard D. <[log in to unmask]>

Tue, 12 Apr 2011 12:40:54 -0500

244 lines

Re: Class 0 ESDS board assembly transport...

Gregg Owens <[log in to unmask]>

Thu, 14 Apr 2011 14:39:21 -0700

107 lines

Re: Class 0 ESDS board assembly transport...

Steven Creswick <[log in to unmask]>

Thu, 14 Apr 2011 19:27:58 -0400

175 lines

Re: Class 0 ESDS board assembly transport...

Keith Calhoun <[log in to unmask]>

Fri, 15 Apr 2011 07:12:52 -0400

227 lines

New Thread

Contact search

Contact search

Mickey Weiner <[log in to unmask]>

Tue, 26 Apr 2011 21:53:41 +0300

46 lines

Re: Contact search

harvey <[log in to unmask]>

Tue, 26 Apr 2011 12:57:23 -0700

96 lines

Re: Contact search

Mickey Weiner <[log in to unmask]>

Wed, 27 Apr 2011 07:46:07 +0300

111 lines

New Thread

Cracked ceramic capacitors

Cracked ceramic capacitors

Rivera, Raye <[log in to unmask]>

Fri, 8 Apr 2011 07:55:19 -0700

54 lines

Re: Cracked ceramic capacitors

Stadem, Richard D. <[log in to unmask]>

Fri, 8 Apr 2011 10:23:55 -0500

102 lines

Re: Cracked ceramic capacitors

David D. Hillman <[log in to unmask]>

Fri, 8 Apr 2011 11:03:25 -0500

116 lines

Re: Cracked ceramic capacitors

Ioan Tempea <[log in to unmask]>

Fri, 8 Apr 2011 12:05:38 -0400

149 lines

Re: Cracked ceramic capacitors

Werner Engelmaier <[log in to unmask]>

Fri, 8 Apr 2011 12:08:26 -0400

274 lines

Re: Cracked ceramic capacitors

Roger Mack <[log in to unmask]>

Fri, 8 Apr 2011 11:18:47 -0500

129 lines

Re: Cracked ceramic capacitors

Stadem, Richard D. <[log in to unmask]>

Fri, 8 Apr 2011 11:34:00 -0500

212 lines

Re: Cracked ceramic capacitors

Joyce Koo <[log in to unmask]>

Fri, 8 Apr 2011 12:55:26 -0400

249 lines

Re: Cracked ceramic capacitors

Stadem, Richard D. <[log in to unmask]>

Fri, 8 Apr 2011 11:58:22 -0500

261 lines

Re: Cracked ceramic capacitors

Robert Kondner <[log in to unmask]>

Fri, 8 Apr 2011 13:00:34 -0400

88 lines

New Thread

Definition

Definition

Werner Engelmaier <[log in to unmask]>

Tue, 12 Apr 2011 15:30:17 -0400

36 lines

Re: Definition

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 12 Apr 2011 12:37:26 -0700

70 lines

Re: Definition

Werner Engelmaier <[log in to unmask]>

Tue, 12 Apr 2011 15:47:36 -0400

131 lines

Re: Definition

Stadem, Richard D. <[log in to unmask]>

Tue, 12 Apr 2011 15:00:38 -0500

76 lines

Re: Definition

Stadem, Richard D. <[log in to unmask]>

Tue, 12 Apr 2011 15:05:45 -0500

166 lines

Re: Definition

Pete <[log in to unmask]>

Wed, 13 Apr 2011 08:20:50 -0500

26 lines

New Thread

DI water and plating

DI water and plating

Douglas Pauls <[log in to unmask]>

Tue, 5 Apr 2011 10:48:53 -0500

32 lines

Re: DI water and plating

Karen Tellefsen <[log in to unmask]>

Tue, 5 Apr 2011 12:40:30 -0400

91 lines

Re: DI water and plating

Chuck Brummer <[log in to unmask]>

Tue, 5 Apr 2011 11:18:24 -0700

91 lines

Re: DI water and plating

John Goulet <[log in to unmask]>

Tue, 5 Apr 2011 19:29:15 +0000

86 lines

New Thread

Die bonding requirements

Die bonding requirements

Victor Hernandez <[log in to unmask]>

Thu, 28 Apr 2011 08:27:36 -0500

99 lines

Re: Die bonding requirements

Steven Creswick <[log in to unmask]>

Thu, 28 Apr 2011 11:13:23 -0400

74 lines

Re: Die bonding requirements

Victor Hernandez <[log in to unmask]>

Thu, 28 Apr 2011 11:46:44 -0500

92 lines

Re: Die bonding requirements

Steven Creswick <[log in to unmask]>

Thu, 28 Apr 2011 13:42:08 -0400

288 lines

Re: Die bonding requirements

Inge Hernefjord <[log in to unmask]>

Thu, 28 Apr 2011 21:51:26 +0200

219 lines

Re: Die bonding requirements

Thayer, Wayne - IIW <[log in to unmask]>

Fri, 29 Apr 2011 07:30:26 -0400

256 lines

Re: Die bonding requirements

Inge Hernefjord <[log in to unmask]>

Sat, 30 Apr 2011 08:34:50 +0200

321 lines

New Thread

Dispensing of Peelable Soldermask

Dispensing of Peelable Soldermask

Blair Hogg <[log in to unmask]>

Fri, 15 Apr 2011 09:04:59 -0500

34 lines

Re: Dispensing of Peelable Soldermask

Richard D. Krug <[log in to unmask]>

Fri, 15 Apr 2011 10:17:40 -0400

62 lines

Re: Dispensing of Peelable Soldermask

Phil Bavaro <[log in to unmask]>

Fri, 15 Apr 2011 07:13:20 -0700

77 lines

Re: Dispensing of Peelable Soldermask

Steven Creswick <[log in to unmask]>

Fri, 15 Apr 2011 11:40:10 -0400

46 lines

Re: Dispensing of Peelable Soldermask

Blair Hogg <[log in to unmask]>

Fri, 15 Apr 2011 11:49:17 -0500

50 lines

Re: Dispensing of Peelable Soldermask

Keith Calhoun <[log in to unmask]>

Fri, 15 Apr 2011 13:15:44 -0400

98 lines

Re: Dispensing of Peelable Soldermask

Steven Creswick <[log in to unmask]>

Sat, 16 Apr 2011 09:00:05 -0400

97 lines

Re: Dispensing of Peelable Soldermask

Blair Hogg <[log in to unmask]>

Sun, 17 Apr 2011 10:05:26 -0500

27 lines

Re: Dispensing of Peelable Soldermask

Stadem, Richard D. <[log in to unmask]>

Mon, 18 Apr 2011 07:44:39 -0500

84 lines

Re: Dispensing of Peelable Soldermask

Stadem, Richard D. <[log in to unmask]>

Mon, 18 Apr 2011 07:46:54 -0500

127 lines

New Thread

Engelmaier on-line obiturary from Global SMT - where Werner was a columnist.

Engelmaier on-line obiturary from Global SMT - where Werner was a columnist.

Dennis Fritz <[log in to unmask]>

Sun, 17 Apr 2011 22:44:35 -0400

39 lines

New Thread

ESD safe ID Badge Holders

ESD safe ID Badge Holders

Marsico, James - ES <[log in to unmask]>

Thu, 21 Apr 2011 09:19:47 -0400

54 lines

Re: ESD safe ID Badge Holders

Stadem, Richard D. <[log in to unmask]>

Thu, 21 Apr 2011 09:19:57 -0500

90 lines

Re: ESD safe ID Badge Holders

Marsico, James - ES <[log in to unmask]>

Thu, 21 Apr 2011 10:36:53 -0400

113 lines

Re: ESD safe ID Badge Holders

Stadem, Richard D. <[log in to unmask]>

Thu, 21 Apr 2011 09:48:12 -0500

125 lines

Re: ESD safe ID Badge Holders

Stadem, Richard D. <[log in to unmask]>

Thu, 21 Apr 2011 09:55:49 -0500

154 lines

Re: ESD safe ID Badge Holders

Marsico, James - ES <[log in to unmask]>

Thu, 21 Apr 2011 11:26:03 -0400

192 lines

Re: ESD safe ID Badge Holders

Phil Bavaro <[log in to unmask]>

Thu, 21 Apr 2011 08:28:07 -0700

205 lines

Re: ESD safe ID Badge Holders

Marsico, James - ES <[log in to unmask]>

Thu, 21 Apr 2011 11:29:54 -0400

243 lines

Re: ESD safe ID Badge Holders

Phil Bavaro <[log in to unmask]>

Thu, 21 Apr 2011 08:41:13 -0700

285 lines

New Thread

EXT :Re: [TN] Sad news about Werner Engelmaier

Re: EXT :Re: [TN] Sad news about Werner Engelmaier

Patten, James C (AS) <[log in to unmask]>

Sun, 17 Apr 2011 17:41:22 +0000

43 lines

New Thread

EXTERNAL: [TN] LGA geometry advice

Re: EXTERNAL: [TN] LGA geometry advice

Gumpert, Ben <[log in to unmask]>

Tue, 19 Apr 2011 11:42:29 -0400

95 lines

Re: EXTERNAL: [TN] LGA geometry advice

Stadem, Richard D. <[log in to unmask]>

Tue, 19 Apr 2011 10:48:19 -0500

133 lines

New Thread

EXTERNAL: [TN] terminology

Re: EXTERNAL: [TN] terminology

Douglas Pauls <[log in to unmask]>

Thu, 31 Mar 2011 06:51:54 -0500

193 lines

New Thread

Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Andrzej Zielinski <[log in to unmask]>

Mon, 18 Apr 2011 04:25:43 -0500

45 lines

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Larry Dzaugis <[log in to unmask]>

Mon, 18 Apr 2011 13:17:46 -0500

78 lines

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Graham Collins <[log in to unmask]>

Mon, 18 Apr 2011 15:28:32 -0300

67 lines

Re: Gluing of resistor on the PCB - IPC-A-610 class 3 compliance

Stadem, Richard D. <[log in to unmask]>

Mon, 18 Apr 2011 13:42:59 -0500

74 lines

New Thread

Gluing of SMT pads

Gluing of SMT pads

Ioan Tempea <[log in to unmask]>

Mon, 11 Apr 2011 09:53:21 -0400

52 lines

Re: Gluing of SMT pads

Stadem, Richard D. <[log in to unmask]>

Mon, 11 Apr 2011 09:25:08 -0500

87 lines

New Thread

hole sizes

hole sizes

Louis Hart <[log in to unmask]>

Thu, 21 Apr 2011 23:24:46 +0000

47 lines

Re: hole sizes

David D. Hillman <[log in to unmask]>

Fri, 22 Apr 2011 07:37:41 -0500

103 lines

Re: hole sizes

Wenger, George M. <[log in to unmask]>

Fri, 22 Apr 2011 07:59:44 -0500

162 lines

Re: hole sizes

Chris Mahanna <[log in to unmask]>

Mon, 25 Apr 2011 10:04:23 -0400

82 lines

Re: hole sizes

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 14:58:12 +0000

84 lines

New Thread

Immersion/Electroless Palladium as final finish?

Immersion/Electroless Palladium as final finish?

Kimberly Stanley <[log in to unmask]>

Wed, 20 Apr 2011 20:13:35 +0000

35 lines

Re: Immersion/Electroless Palladium as final finish?

David D. Hillman <[log in to unmask]>

Wed, 20 Apr 2011 15:28:08 -0500

95 lines

Re: Immersion/Electroless Palladium as final finish?

R Sedlak <[log in to unmask]>

Thu, 21 Apr 2011 09:10:45 -0700

77 lines

Re: Immersion/Electroless Palladium as final finish?

Reuven Rokah <[log in to unmask]>

Thu, 21 Apr 2011 20:59:16 +0300

115 lines

New Thread

IPC webinar on FR-4 CCL Reclassification Explained 4-May US/5-May Asia

IPC webinar on FR-4 CCL Reclassification Explained 4-May US/5-May Asia

David Bergman <[log in to unmask]>

Tue, 19 Apr 2011 16:55:09 -0500

67 lines

New Thread

IPC-A-610, Solder on gold fingers - Inspection/Acceptability

IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris <[log in to unmask]>

Wed, 20 Apr 2011 15:13:56 -0500

60 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris <[log in to unmask]>

Thu, 21 Apr 2011 12:21:04 -0500

24 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Phil Bavaro <[log in to unmask]>

Thu, 21 Apr 2011 15:32:48 -0700

82 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Inge Hernefjord <[log in to unmask]>

Fri, 22 Apr 2011 18:29:46 +0200

170 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris <[log in to unmask]>

Wed, 27 Apr 2011 10:55:28 -0500

29 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Kelly Morris <[log in to unmask]>

Wed, 27 Apr 2011 10:57:30 -0500

28 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Nowland, Russell Howard (Russell) <[log in to unmask]>

Wed, 27 Apr 2011 13:27:39 -0500

106 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Inge Hernefjord <[log in to unmask]>

Thu, 28 Apr 2011 07:28:42 +0200

56 lines

Re: IPC-A-610, Solder on gold fingers - Inspection/Acceptability

Victor Hernandez <[log in to unmask]>

Thu, 28 Apr 2011 06:55:04 -0500

57 lines

New Thread

laid off

laid off

pearl petras <[log in to unmask]>

Mon, 25 Apr 2011 16:17:57 -0700

27 lines

Re: laid off

Joyce Koo <[log in to unmask]>

Mon, 25 Apr 2011 19:29:09 -0400

82 lines

Re: laid off

Tan Geok Ang <[log in to unmask]>

Tue, 26 Apr 2011 08:06:17 +0800

114 lines

Re: laid off

Dwight Mattix <[log in to unmask]>

Mon, 25 Apr 2011 17:33:39 -0700

61 lines

Re: laid off

Steve Gregory <[log in to unmask]>

Mon, 25 Apr 2011 21:13:49 -0400

99 lines

Re: laid off

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 12:35:36 +0000

89 lines

Re: laid off

Woolley, Mark D. (Mark) <[log in to unmask]>

Tue, 26 Apr 2011 07:37:55 -0600

104 lines

Re: laid off

Karen Tellefsen <[log in to unmask]>

Tue, 26 Apr 2011 10:45:43 -0400

151 lines

Re: laid off

Robert Kondner <[log in to unmask]>

Tue, 26 Apr 2011 11:28:47 -0400

149 lines

Re: laid off

Upton, Shawn <[log in to unmask]>

Tue, 26 Apr 2011 11:51:54 -0400

97 lines

Re: laid off

Ahmad, Syed <[log in to unmask]>

Tue, 26 Apr 2011 09:06:45 -0700

155 lines

Re: laid off

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 17:46:53 +0000

244 lines

Re: laid off

Robert Kondner <[log in to unmask]>

Tue, 26 Apr 2011 13:57:13 -0400

274 lines

Re: laid off

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 18:01:41 +0000

167 lines

Re: laid off

Gene Felder <[log in to unmask]>

Tue, 26 Apr 2011 11:37:40 -0700

322 lines

Re: laid off

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 19:40:31 +0000

295 lines

Re: laid off

Brian Stumm <[log in to unmask]>

Tue, 26 Apr 2011 16:29:51 -0700

61 lines

New Thread

Large/Thick boards and PnP

Large/Thick boards and PnP

Upton, Shawn <[log in to unmask]>

Thu, 28 Apr 2011 08:04:38 -0400

51 lines

Re: Large/Thick boards and PnP

Jerry Dengler <[log in to unmask]>

Thu, 28 Apr 2011 08:38:49 -0400

103 lines

New Thread

LGA geometry advice

LGA geometry advice

Eric Christison <[log in to unmask]>

Tue, 19 Apr 2011 16:35:53 +0100

66 lines

Re: LGA geometry advice

Stadem, Richard D. <[log in to unmask]>

Tue, 19 Apr 2011 10:47:13 -0500

104 lines

Re: LGA geometry advice

Jerry Dengler <[log in to unmask]>

Tue, 19 Apr 2011 11:52:23 -0400

115 lines

Re: LGA geometry advice

Eric Christison <[log in to unmask]>

Tue, 19 Apr 2011 17:04:06 +0100

104 lines

Re: LGA geometry advice

Stadem, Richard D. <[log in to unmask]>

Tue, 19 Apr 2011 11:41:18 -0500

144 lines

Re: LGA geometry advice

Jerry Dengler <[log in to unmask]>

Tue, 19 Apr 2011 12:42:21 -0400

164 lines

Re: LGA geometry advice

Dennis Fritz <[log in to unmask]>

Tue, 19 Apr 2011 13:19:48 -0400

166 lines

Re: LGA geometry advice

Eric Christison <[log in to unmask]>

Wed, 20 Apr 2011 09:18:41 +0100

154 lines

Re: LGA geometry advice

Stadem, Richard D. <[log in to unmask]>

Wed, 20 Apr 2011 07:46:04 -0500

201 lines

Re: LGA geometry advice

Ioan Tempea <[log in to unmask]>

Wed, 20 Apr 2011 08:58:53 -0400

245 lines

Re: LGA geometry advice

Karen Tellefsen <[log in to unmask]>

Wed, 20 Apr 2011 09:25:45 -0400

332 lines

Re: LGA geometry advice

Rex Waygood <[log in to unmask]>

Wed, 20 Apr 2011 14:31:37 +0100

73 lines

Re: LGA geometry advice

Stadem, Richard D. <[log in to unmask]>

Wed, 20 Apr 2011 08:38:17 -0500

300 lines

Re: LGA geometry advice

Jerry Dengler <[log in to unmask]>

Wed, 20 Apr 2011 09:39:25 -0400

280 lines

Re: LGA geometry advice

Pete <[log in to unmask]>

Wed, 20 Apr 2011 09:05:22 -0500

28 lines

New Thread

Listserv Status April 5th

Listserv Status April 5th

Keach Sasamori <[log in to unmask]>

Tue, 5 Apr 2011 16:42:38 -0500

47 lines

Re: Listserv Status April 5th

Stadem, Richard D. <[log in to unmask]>

Wed, 6 Apr 2011 07:40:14 -0500

77 lines

New Thread

Listserv Upgrade - Status April 4th

Listserv Upgrade - Status April 4th

Keach Sasamori <[log in to unmask]>

Mon, 4 Apr 2011 15:01:52 -0500

75 lines

New Thread

Mixed bed resin in deionizing tanks

Mixed bed resin in deionizing tanks

Steve Gregory <[log in to unmask]>

Thu, 28 Apr 2011 08:28:04 -0400

61 lines

Re: Mixed bed resin in deionizing tanks

Brian Ellis <[log in to unmask]>

Thu, 28 Apr 2011 15:42:00 +0300

111 lines

New Thread

NESTING

NESTING

Linda Langley <[log in to unmask]>

Wed, 6 Apr 2011 13:18:05 -0400

51 lines

New Thread

No traffic

Re: No traffic

Hogg, Blair K. <[log in to unmask]>

Thu, 31 Mar 2011 11:07:52 -0400

38 lines

New Thread

NTC Friday Element Quiz - the Answer

NTC Friday Element Quiz - the Answer

David D. Hillman <[log in to unmask]>

Mon, 4 Apr 2011 17:40:28 -0500

119 lines

Re: NTC Friday Element Quiz - the Answer

Graham Collins <[log in to unmask]>

Mon, 4 Apr 2011 20:49:14 -0300

171 lines

NTC Friday Element Quiz - the Answer

David D. Hillman <[log in to unmask]>

Fri, 8 Apr 2011 16:48:22 -0500

141 lines

NTC Friday Element Quiz - the Answer

David D. Hillman <[log in to unmask]>

Fri, 22 Apr 2011 16:18:10 -0500

131 lines

Re: NTC Friday Element Quiz - the Answer

Ahne Oosterhof <[log in to unmask]>

Fri, 22 Apr 2011 15:58:51 -0700

164 lines

Re: NTC Friday Element Quiz - the Answer

Carroll, Thomas A <[log in to unmask]>

Fri, 22 Apr 2011 22:50:16 -0500

186 lines

NTC Friday Element Quiz - the Answer

David D. Hillman <[log in to unmask]>

Fri, 29 Apr 2011 16:26:45 -0500

134 lines

Re: NTC Friday Element Quiz - the Answer

Brian Ellis <[log in to unmask]>

Sat, 30 Apr 2011 09:29:00 +0300

169 lines

Re: NTC Friday Element Quiz - the Answer

Carroll, Thomas A <[log in to unmask]>

Sat, 30 Apr 2011 05:03:10 -0500

230 lines

New Thread

NTC Friday Element Quiz - the Question

NTC Friday Element Quiz - the Question

David D. Hillman <[log in to unmask]>

Fri, 1 Apr 2011 17:57:04 -0500

100 lines

Re: NTC Friday Element Quiz - the Question

Frank Kimmey <[log in to unmask]>

Fri, 1 Apr 2011 16:00:05 -0700

148 lines

Re: NTC Friday Element Quiz - the Question

Joyce Koo <[log in to unmask]>

Fri, 1 Apr 2011 19:17:33 -0400

147 lines

Re: NTC Friday Element Quiz - the Question

Phil Bavaro <[log in to unmask]>

Fri, 1 Apr 2011 16:44:10 -0700

186 lines

Re: NTC Friday Element Quiz - the Question

Frank Kimmey <[log in to unmask]>

Fri, 1 Apr 2011 16:49:39 -0700

182 lines

Re: NTC Friday Element Quiz - the Question

Ted Edwards <[log in to unmask]>

Sat, 2 Apr 2011 00:13:34 +0000

142 lines

Re: NTC Friday Element Quiz - the Question

Joyce Koo <[log in to unmask]>

Fri, 1 Apr 2011 21:23:25 -0400

181 lines

Re: NTC Friday Element Quiz - the Question

David D. Hillman <[log in to unmask]>

Mon, 4 Apr 2011 07:30:42 -0500

192 lines

Re: NTC Friday Element Quiz - the Question

Graham Collins <[log in to unmask]>

Mon, 4 Apr 2011 09:35:27 -0300

240 lines

Re: NTC Friday Element Quiz - the Question

Douglas Pauls <[log in to unmask]>

Mon, 4 Apr 2011 07:39:00 -0500

240 lines

Re: NTC Friday Element Quiz - the Question

Carroll, Thomas A <[log in to unmask]>

Mon, 4 Apr 2011 07:57:46 -0500

272 lines

Re: NTC Friday Element Quiz - the Question

Mike Fenner <[log in to unmask]>

Mon, 4 Apr 2011 14:18:59 +0100

264 lines

Re: NTC Friday Element Quiz - the Question

Steven Creswick <[log in to unmask]>

Mon, 4 Apr 2011 09:34:10 -0400

39 lines

Re: NTC Friday Element Quiz - the Question

Phil Bavaro <[log in to unmask]>

Mon, 4 Apr 2011 07:14:02 -0700

250 lines

Re: NTC Friday Element Quiz - the Question

Ahne Oosterhof <[log in to unmask]>

Mon, 4 Apr 2011 08:39:44 -0700

223 lines

NTC Friday Element Quiz - the Question

David D. Hillman <[log in to unmask]>

Thu, 7 Apr 2011 16:29:56 -0500

110 lines

Re: NTC Friday Element Quiz - the Question

Phil Bavaro <[log in to unmask]>

Thu, 7 Apr 2011 14:40:23 -0700

161 lines

Re: NTC Friday Element Quiz - the Question

Robert Wolfe <[log in to unmask]>

Thu, 7 Apr 2011 17:49:32 -0400

151 lines

Re: NTC Friday Element Quiz - the Question

Woolley, Mark D. (Mark) <[log in to unmask]>

Thu, 7 Apr 2011 15:54:40 -0600

157 lines

Re: NTC Friday Element Quiz - the Question

Woolley, Mark D. (Mark) <[log in to unmask]>

Thu, 7 Apr 2011 15:56:00 -0600

100 lines

Re: NTC Friday Element Quiz - the Question

Carroll, Thomas A <[log in to unmask]>

Thu, 7 Apr 2011 17:00:25 -0500

149 lines

Re: NTC Friday Element Quiz - the Question

Ahne Oosterhof <[log in to unmask]>

Thu, 7 Apr 2011 17:05:01 -0700

142 lines

Re: NTC Friday Element Quiz - the Question

Carroll, Thomas A <[log in to unmask]>

Thu, 7 Apr 2011 19:09:08 -0500

184 lines

Re: NTC Friday Element Quiz - the Question

Steven Creswick <[log in to unmask]>

Thu, 7 Apr 2011 20:19:57 -0400

152 lines

Re: NTC Friday Element Quiz - the Question

Douglas Pauls <[log in to unmask]>

Fri, 8 Apr 2011 07:46:07 -0500

159 lines

NTC Friday Element Quiz - the Question

David D. Hillman <[log in to unmask]>

Fri, 22 Apr 2011 07:14:44 -0500

110 lines

Re: NTC Friday Element Quiz - the Question

Carroll, Thomas A <[log in to unmask]>

Fri, 22 Apr 2011 07:46:37 -0500

112 lines

NTC Friday Element Quiz - the Question

David D. Hillman <[log in to unmask]>

Fri, 29 Apr 2011 08:21:49 -0500

113 lines

Re: NTC Friday Element Quiz - the Question

Victor Hernandez <[log in to unmask]>

Fri, 29 Apr 2011 08:32:30 -0500

147 lines

Re: NTC Friday Element Quiz - the Question

Graham Collins <[log in to unmask]>

Fri, 29 Apr 2011 10:54:19 -0300

150 lines

Re: NTC Friday Element Quiz - the Question

Carroll, Thomas A <[log in to unmask]>

Fri, 29 Apr 2011 08:42:32 -0500

117 lines

New Thread

NTC Position Available

NTC Position Available

Blair Hogg <[log in to unmask]>

Wed, 6 Apr 2011 08:35:39 -0500

26 lines

New Thread

NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

David D. Hillman <[log in to unmask]>

Fri, 29 Apr 2011 11:28:43 -0500

114 lines

Re: NTC Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion piece by James Smith

Ahne Oosterhof <[log in to unmask]>

Fri, 29 Apr 2011 12:27:14 -0700

165 lines

New Thread

Panel manufacturability

Panel manufacturability

Jean-Francois Bissonnette <[log in to unmask]>

Thu, 28 Apr 2011 17:28:52 -0400

60 lines

Re: Panel manufacturability

Larry Dzaugis <[log in to unmask]>

Thu, 28 Apr 2011 17:10:04 -0500

43 lines

Re: Panel manufacturability

Chris Knudsen <[log in to unmask]>

Fri, 29 Apr 2011 10:38:45 -0400

67 lines

New Thread

Peel strength Value

Peel strength Value

Gilbert Min <[log in to unmask]>

Wed, 6 Apr 2011 09:52:09 +0900

50 lines

Re: Peel strength Value

Lee Parker <[log in to unmask]>

Tue, 5 Apr 2011 20:56:08 -0400

89 lines

New Thread

PK Metals - Molten Solder Surfactant (MS2(tm))

PK Metals - Molten Solder Surfactant (MS2(tm))

Craig Sullivan <[log in to unmask]>

Fri, 22 Apr 2011 09:03:37 -0400

61 lines

New Thread

Please Remove Posts from Archives "Laid OFF"

Please Remove Posts from Archives "Laid OFF"

John Goulet <[log in to unmask]>

Wed, 27 Apr 2011 01:05:06 +0000

43 lines

New Thread

PWB Finish Specifications

PWB Finish Specifications

Stadem, Richard D. <[log in to unmask]>

Fri, 8 Apr 2011 09:48:53 -0500

34 lines

Re: PWB Finish Specifications

Thomas E Kemp <[log in to unmask]>

Fri, 8 Apr 2011 10:13:05 -0500

81 lines

Re: PWB Finish Specifications

David D. Hillman <[log in to unmask]>

Fri, 8 Apr 2011 14:11:25 -0500

85 lines

New Thread

Response from Werner Engelmaier's son, Peter

Response from Werner Engelmaier's son, Peter

Dennis Fritz <[log in to unmask]>

Sun, 17 Apr 2011 22:35:46 -0400

238 lines

Re: Response from Werner Engelmaier's son, Peter

Werner Engelmaier <[log in to unmask]>

Sun, 17 Apr 2011 22:43:39 -0400

516 lines

Re: Response from Werner Engelmaier's son, Peter

Paul Edwards <[log in to unmask]>

Mon, 18 Apr 2011 09:39:56 -0700

585 lines

Re: Response from Werner Engelmaier's son, Peter

Phil Bavaro <[log in to unmask]>

Mon, 18 Apr 2011 10:25:31 -0700

578 lines

Re: Response from Werner Engelmaier's son, Peter

Pete <[log in to unmask]>

Tue, 19 Apr 2011 08:30:54 -0500

29 lines

New Thread

response to prevalidation for DLA

response to prevalidation for DLA

Louis Hart <[log in to unmask]>

Thu, 21 Apr 2011 23:12:21 +0000

45 lines

New Thread

Sad news about Werner Engelmaier

Sad news about Werner Engelmaier

Jack Crawford <[log in to unmask]>

Sun, 17 Apr 2011 10:48:17 -0500

42 lines

Re: Sad news about Werner Engelmaier

Steven Creswick <[log in to unmask]>

Sun, 17 Apr 2011 11:52:38 -0400

40 lines

Re: Sad news about Werner Engelmaier

Steve Gregory <[log in to unmask]>

Sun, 17 Apr 2011 12:14:09 -0400

78 lines

Re: Sad news about Werner Engelmaier

Carroll, Thomas A <[log in to unmask]>

Sun, 17 Apr 2011 11:15:45 -0500

79 lines

Re: Sad news about Werner Engelmaier

Reuven Rokah <[log in to unmask]>

Sun, 17 Apr 2011 19:23:57 +0300

104 lines

Re: Sad news about Werner Engelmaier

Mumtaz Bora <[log in to unmask]>

Sun, 17 Apr 2011 09:34:31 -0700

107 lines

Re: Sad news about Werner Engelmaier

John Goulet <[log in to unmask]>

Sun, 17 Apr 2011 16:37:28 +0000

148 lines

Re: Sad news about Werner Engelmaier

Joyce Koo <[log in to unmask]>

Sun, 17 Apr 2011 13:08:05 -0400

130 lines

Re: Sad news about Werner Engelmaier

Bev Christian <[log in to unmask]>

Sun, 17 Apr 2011 13:27:39 -0400

149 lines

Re: Sad news about Werner Engelmaier

Lee Parker <[log in to unmask]>

Sun, 17 Apr 2011 14:07:13 -0400

171 lines

Re: Sad news about Werner Engelmaier

Bob Landman <[log in to unmask]>

Sun, 17 Apr 2011 14:26:44 -0400

150 lines

Re: Sad news about Werner Engelmaier

Graham Naisbitt <[log in to unmask]>

Sun, 17 Apr 2011 19:28:16 +0100

79 lines

Re: Sad news about Werner Engelmaier

Karen Tellefsen <[log in to unmask]>

Sun, 17 Apr 2011 15:56:34 -0400

99 lines

Re: Sad news about Werner Engelmaier

Tan Geok Ang <[log in to unmask]>

Mon, 18 Apr 2011 09:06:20 +0800

168 lines

Re: Sad news about Werner Engelmaier

Brian Ellis <[log in to unmask]>

Mon, 18 Apr 2011 08:54:26 +0300

86 lines

Re: Sad news about Werner Engelmaier

Eric Christison <[log in to unmask]>

Mon, 18 Apr 2011 10:35:15 +0100

54 lines

Re: Sad news about Werner Engelmaier

Stadem, Richard D. <[log in to unmask]>

Mon, 18 Apr 2011 08:34:28 -0500

206 lines

Re: Sad news about Werner Engelmaier

Graham Collins <[log in to unmask]>

Mon, 18 Apr 2011 10:56:21 -0300

85 lines

Re: Sad news about Werner Engelmaier

Jack Olson <[log in to unmask]>

Mon, 18 Apr 2011 09:39:31 -0500

33 lines

Re: Sad news about Werner Engelmaier

Paul Reid <[log in to unmask]>

Mon, 18 Apr 2011 13:27:05 -0400

94 lines

Re: Sad news about Werner Engelmaier

Amol Kane <[log in to unmask]>

Mon, 18 Apr 2011 15:51:35 -0400

122 lines

Re: Sad news about Werner Engelmaier

Leland Woodall <[log in to unmask]>

Mon, 18 Apr 2011 16:20:26 -0400

124 lines

Re: Sad news about Werner Engelmaier

Rick Bell <[log in to unmask]>

Tue, 19 Apr 2011 15:37:45 -0500

83 lines

Re: Sad news about Werner Engelmaier

Inge Hernefjord <[log in to unmask]>

Wed, 20 Apr 2011 09:03:26 +0200

139 lines

Re: Sad news about Werner Engelmaier

Gabriela <[log in to unmask]>

Wed, 20 Apr 2011 11:24:54 +0300

222 lines

Re: Sad news about Werner Engelmaier

Fox, Ian <[log in to unmask]>

Tue, 26 Apr 2011 08:39:11 +0100

101 lines

Re: Sad news about Werner Engelmaier

Jerry Garcia <[log in to unmask]>

Tue, 26 Apr 2011 08:37:49 -0400

90 lines

New Thread

Sad news about Werner Engelmaier, Business in Scotland

Re: Sad news about Werner Engelmaier, Business in Scotland

John Goulet <[log in to unmask]>

Tue, 26 Apr 2011 14:42:51 +0000

135 lines

New Thread

Solder Mask Touch Up

Solder Mask Touch Up

Bev Christian <[log in to unmask]>

Wed, 27 Apr 2011 12:03:14 -0400

42 lines

Re: Solder Mask Touch Up

Steve Gregory <[log in to unmask]>

Wed, 27 Apr 2011 12:37:04 -0400

75 lines

New Thread

Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Bogert, Gerald L (Contractor) <[log in to unmask]>

Thu, 31 Mar 2011 06:28:49 -0400

109 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Jim Carlson <[log in to unmask]>

Fri, 1 Apr 2011 14:32:15 -0400

152 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Graham Collins <[log in to unmask]>

Fri, 1 Apr 2011 15:53:48 -0300

153 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Carroll, Thomas A <[log in to unmask]>

Fri, 1 Apr 2011 14:11:00 -0500

143 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Brad Saunders <[log in to unmask]>

Sat, 2 Apr 2011 08:47:42 -0400

149 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Bogert, Gerald L (Contractor) <[log in to unmask]>

Sat, 2 Apr 2011 10:43:05 -0400

184 lines

Re: Soldering two SMT resistors to lands originally designed for only one resistor; is it technically OK?

Rex Waygood <[log in to unmask]>

Mon, 4 Apr 2011 15:42:23 +0100

176 lines

New Thread

sorry...

sorry...

Louis Hart <[log in to unmask]>

Thu, 21 Apr 2011 23:14:27 +0000

38 lines

New Thread

Spare Part and Maintainence Cost Approximation

Spare Part and Maintainence Cost Approximation

prashant chopra <[log in to unmask]>

Thu, 31 Mar 2011 17:53:35 +0530

40 lines

Re: Spare Part and Maintainence Cost Approximation

Nowland, Russell Howard (Russell) <[log in to unmask]>

Fri, 1 Apr 2011 13:54:36 -0500

88 lines

Re: Spare Part and Maintainence Cost Approximation

Stadem, Richard D. <[log in to unmask]>

Mon, 4 Apr 2011 07:42:39 -0500

75 lines

New Thread

Stencil Thickness

Stencil Thickness

Jean-Francois Bissonnette <[log in to unmask]>

Tue, 19 Apr 2011 08:55:17 -0400

47 lines

Re: Stencil Thickness

Lenny Carter <[log in to unmask]>

Tue, 19 Apr 2011 09:08:48 -0400

87 lines

Re: Stencil Thickness

Amol Kane <[log in to unmask]>

Tue, 19 Apr 2011 09:09:42 -0400

99 lines

Re: Stencil Thickness

Nowland, Russell Howard (Russell) <[log in to unmask]>

Tue, 19 Apr 2011 09:08:01 -0500

110 lines

Re: Stencil Thickness

Robert Kondner <[log in to unmask]>

Tue, 19 Apr 2011 10:14:32 -0400

128 lines

Re: Stencil Thickness

Post, Scott E <[log in to unmask]>

Tue, 19 Apr 2011 14:25:11 +0000

107 lines

New Thread

Still dealing with Listserv upgrade

Still dealing with Listserv upgrade

Keach Sasamori <[log in to unmask]>

Thu, 31 Mar 2011 12:48:30 -0500

42 lines

New Thread

Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Victor Hernandez <[log in to unmask]>

Wed, 6 Apr 2011 13:30:26 -0500

86 lines

Re: Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Werner Engelmaier <[log in to unmask]>

Wed, 6 Apr 2011 15:15:07 -0400

208 lines

Re: Surface Mount technology, Rectangular passive components (mostly resistors and capacitors):

Michael R. Floyd <[log in to unmask]>

Wed, 6 Apr 2011 15:06:43 -0400

126 lines

New Thread

Tape and Reel Specification

Tape and Reel Specification

Marsico, James - ES <[log in to unmask]>

Wed, 27 Apr 2011 11:28:28 -0400

54 lines

Re: Tape and Reel Specification

Kelly Morris <[log in to unmask]>

Wed, 27 Apr 2011 10:51:36 -0500

26 lines

Re: Tape and Reel Specification

Robert Kondner <[log in to unmask]>

Wed, 27 Apr 2011 11:59:58 -0400

85 lines

Re: Tape and Reel Specification

Steve Gregory <[log in to unmask]>

Wed, 27 Apr 2011 12:01:29 -0400

92 lines

Re: Tape and Reel Specification

Marsico, James - ES <[log in to unmask]>

Wed, 27 Apr 2011 13:20:11 -0400

126 lines

New Thread

terminology

Re: terminology

Jack Olson <[log in to unmask]>

Thu, 31 Mar 2011 08:37:20 -0500

82 lines

Re: terminology

Ed Popielarski <[log in to unmask]>

Thu, 31 Mar 2011 12:08:21 -0700

84 lines

Re: terminology

Marsal Tampubolon <[log in to unmask]>

Fri, 1 Apr 2011 14:25:34 +0700

85 lines

Re: terminology

Brad Saunders <[log in to unmask]>

Sat, 2 Apr 2011 08:57:40 -0400

77 lines

New Thread

terminology _ PCA support for P&P

Re: terminology _ PCA support for P&P

John Goulet <[log in to unmask]>

Thu, 31 Mar 2011 14:13:57 +0000

165 lines

New Thread

Trace repair, need material source

Re: Trace repair, need material source

Graham Collins <[log in to unmask]>

Fri, 29 Apr 2011 08:48:12 -0300

80 lines

New Thread

UL and Bare Board Fabrication

Re: UL and Bare Board Fabrication

Brad Saunders <[log in to unmask]>

Sat, 2 Apr 2011 09:06:41 -0400

196 lines

New Thread

Update - Listserv Upgrade

Update - Listserv Upgrade

Keach Sasamori <[log in to unmask]>

Fri, 1 Apr 2011 14:20:41 -0500

47 lines

Re: Update - Listserv Upgrade

Blair Hogg <[log in to unmask]>

Mon, 4 Apr 2011 08:43:16 -0500

60 lines

Re: Update - Listserv Upgrade

Keach Sasamori <[log in to unmask]>

Mon, 4 Apr 2011 09:51:34 -0500

43 lines

New Thread

Vertical solder fill for component with thermal pad.

Vertical solder fill for component with thermal pad.

Luan Nguyen <[log in to unmask]>

Wed, 6 Apr 2011 15:16:07 +0700

62 lines

Re: Vertical solder fill for component with thermal pad.

Joyce Koo <[log in to unmask]>

Wed, 6 Apr 2011 04:52:28 -0400

103 lines

Re: Vertical solder fill for component with thermal pad.

Mike Fenner <[log in to unmask]>

Wed, 6 Apr 2011 15:37:43 +0100

120 lines

Re: Vertical solder fill for component with thermal pad.

Luan Nguyen <[log in to unmask]>

Thu, 7 Apr 2011 08:07:15 +0700

153 lines

Re: Vertical solder fill for component with thermal pad.

Larry Dzaugis <[log in to unmask]>

Wed, 20 Apr 2011 13:59:38 -0500

47 lines

New Thread

Werner

Werner

Atkinson, Neil <[log in to unmask]>

Mon, 18 Apr 2011 06:37:53 +0100

63 lines

New Thread

White solder mask discoloration

White solder mask discoloration

Jean-Francois Bissonnette <[log in to unmask]>

Fri, 22 Apr 2011 09:19:37 -0400

67 lines

Re: White solder mask discoloration

Louis Hart <[log in to unmask]>

Fri, 22 Apr 2011 13:21:59 +0000

99 lines

Re: White solder mask discoloration

Dennis Fritz <[log in to unmask]>

Mon, 25 Apr 2011 14:50:14 -0400

90 lines

Re: White solder mask discoloration

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 25 Apr 2011 12:05:44 -0700

123 lines

Re: White solder mask discoloration

Richard D. Krug <[log in to unmask]>

Tue, 26 Apr 2011 07:35:51 -0400

110 lines

Re: White solder mask discoloration

Paul Edwards <[log in to unmask]>

Tue, 26 Apr 2011 10:40:32 -0700

172 lines

Re: White solder mask discoloration

Jean-Francois Bissonnette <[log in to unmask]>

Tue, 26 Apr 2011 16:23:02 -0400

123 lines

Re: White solder mask discoloration

Lenny Carter <[log in to unmask]>

Tue, 26 Apr 2011 16:34:59 -0400

170 lines

Re: White solder mask discoloration

John Parsons <[log in to unmask]>

Tue, 26 Apr 2011 13:40:52 -0700

96 lines

Re: White solder mask discoloration

Jean-Francois Bissonnette <[log in to unmask]>

Tue, 26 Apr 2011 16:39:03 -0400

179 lines

Re: White solder mask discoloration

Paul Edwards <[log in to unmask]>

Tue, 26 Apr 2011 13:48:08 -0700

231 lines

Re: White solder mask discoloration

Lenny Carter <[log in to unmask]>

Tue, 26 Apr 2011 16:01:39 -0500

227 lines

Re: White solder mask discoloration

vladimir Igoshev <[log in to unmask]>

Tue, 26 Apr 2011 21:33:35 +0000

116 lines

Re: White solder mask discoloration

Joyce Koo <[log in to unmask]>

Tue, 26 Apr 2011 17:47:48 -0400

208 lines

New Thread

[TechNet] DI water and plating

Re: [TechNet] DI water and plating

Dennis Fritz <[log in to unmask]>

Tue, 5 Apr 2011 21:08:46 -0400

85 lines

Re: [TechNet] DI water and plating

Joyce Koo <[log in to unmask]>

Tue, 5 Apr 2011 21:42:03 -0400

127 lines

Re: [TechNet] DI water and plating

Douglas Pauls <[log in to unmask]>

Wed, 6 Apr 2011 07:32:43 -0500

116 lines

Re: [TechNet] DI water and plating

Paul Reid <[log in to unmask]>

Wed, 6 Apr 2011 08:42:19 -0400

209 lines

Re: [TechNet] DI water and plating

Brian Ellis <[log in to unmask]>

Wed, 6 Apr 2011 17:08:36 +0300

251 lines

Re: [TechNet] DI water and plating

R Sedlak <[log in to unmask]>

Wed, 6 Apr 2011 07:26:04 -0700

174 lines

Re: [TechNet] DI water and plating

Karen Tellefsen <[log in to unmask]>

Wed, 6 Apr 2011 11:15:01 -0400

329 lines

Re: [TechNet] DI water and plating

Brian Ellis <[log in to unmask]>

Wed, 6 Apr 2011 19:01:16 +0300

361 lines

Re: [TechNet] DI water and plating

Paul Edwards <[log in to unmask]>

Wed, 6 Apr 2011 09:18:31 -0700

420 lines

New Thread

[TechNet] NTC Friday Element Quiz - the Answer

Re: [TechNet] NTC Friday Element Quiz - the Answer

David Bealer <[log in to unmask]>

Wed, 6 Apr 2011 07:41:51 -0500

163 lines

New Thread

[TN] NTC Friday Element Quiz - the Question

Re: [TN] NTC Friday Element Quiz - the Question

Ed Popielarski <[log in to unmask]>

Mon, 4 Apr 2011 11:43:27 -0700

311 lines

New Thread

[TN] Spare Part and Maintainence Cost Approximation

Re: [TN] Spare Part and Maintainence Cost Approximation

John Goulet <[log in to unmask]>

Tue, 5 Apr 2011 22:26:18 +0000

171 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager