LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


April 2008


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

<List>[TN] IPC4101B Questions (3 messages)
Aerospace-NTC (4 messages)
AOI Machines (6 messages)
AS9100 and SMT/reflow machine program changes (3 messages)
Baking Flex boards (3 messages)
BGA reballing (2 messages)
Blue Voids (10 messages)
Ceramic filters (1 message)
Chip Shield? (5 messages)
clean room cleanliness, and statistical process control (1 message)
cleanliness in PCB layup (4 messages)
Column Grid Arrays (3 messages)
Cracking Ceramic Cap (26 messages)
Crystal Damage Question (3 messages)
Crystal Damage Question - Failure Mode (9 messages)
Defects related to water wash (12 messages)
DEK 265GSX stencil printer (4 messages)
ENIG PCB Problem... (5 messages)
Environmentally friendly electronics training course (10 messages)
EU's decision on the flame retardant deca-BDE (2 messages)
FN Parts--Evidence of Wetting (8 messages)
Fw: <FRIDAY> Virtual Storage, Data Center Report, Availability Summit (3 messages)
FW: [LF] FW: RoHS Exemptions: Stakeholder meetings (1 message)
gauges (4 messages)
Gerber Data for the IPC B-24, IPC B-25A (2 messages)
Guidelines for setting voltage and current when viewing BGA x-rays (3 messages)
Hand Cleaning Chemistry Qualification (5 messages)
http://www.electronicsrecyclingconference.com/ (EOM) (1 message)
Inward formed L-shaped ribbon lead - solder (6 messages)
Ionic Contamination Question (3 messages)
Ionic Contamination Question (& added info). (7 messages)
IPC Seminar on Future Advanced Packaging Technology (1 message)
IPC Technical Seminars at National Electronics Week, 17-19 June 2008 - Earls Court, London (1 message)
IPC's upcoming Compliance Webcast Series in May 2008! Register Today! (1 message)
IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL (4 messages)
IPC4101B Questions (5 messages)
Lamination press temperature probe cables (1 message)
Laser PTH Soldering (2 messages)
Last Chance to Pre-Register for Reliability Summit in Andover, MA (1 message)
Last Chance to Register for Hands-on Workshop (1 message)
Last Chance to Register for IPC's upcoming Hands-On Workshop (1 message)
layer to layer registration? (3 messages)
Material questions (1 message)
Metal core PCB (5 messages)
Need recommended material for a wave profiling pallet (6 messages)
Non wetting problem (4 messages)
NTC article link (1 message)
NTC: Defects related to water wash (3 messages)
Old Topic - Bottom Side Parts (2 messages)
Out Gassing (26 messages)
PCB Manu in Greece & surrounding countries (1 message)
Pcik-n-place equipment (7 messages)
Pick-n-place equipment (3 messages)
Polymer cored solder spheres Images and sections (2 messages)
Polymer cored solder spheres. (4 messages)
Possible flux contamination issue (16 messages)
PTH Laminate separation at IP post, cross section (2 messages)
PWB spec Class 2 vs assembly spec Class 3 (7 messages)
Question about J-STD-609 (old IPC-1066) (2 messages)
question for the "wayback" machine (4 messages)
Reballing and replating (1 message)
Register today for IPC/JISSO's upcoming Advanced Technology Forum! (1 message)
Regulators are looking more closely at nanotechnology claims from Th... (1 message)
Regulators are looking more closely at nanotechnology claims from The Economist (2 messages)
Rework/touchup of MLCCC chip capacitors and ceramic chip resistors (1 message)
ROHS – More harm than good? A rticle link from EDN (1 message)
RoHS compliant question! (9 messages)
RoHS pronunciation (24 messages)
SAC shear strength (3 messages)
SAC125 and SAC125ni (1 message)
Samtec QMSS-DP Series Differential Pair Connectors (11 messages)
Smoke Desnity test, FR4-06 \ NP-170R (3 messages)
Sn62 solder; any negative experience using it??? (9 messages)
Software package to perform fatigue life prediction of solder joints (7 messages)
Solvent-Free Stencil Wiper Roll (2 messages)
Specifying board thickness (6 messages)
Stencils (13 messages)
SV: [TN] Column Grid Arrays (5 messages)
SV: [TN] Environmentally friendly electronics training course (2 messages)
SV: [TN] Gold Flash vs. ENIG Solder finish (1 message)
SV: [TN] Guidelines for setting voltage and current when viewing BGA x-rays (1 message)
SV: [TN] Ionic Contamination Question (11 messages)
SV: [TN] Ionic Contamination Question (overall vs spot reading) (2 messages)
SV: [TN] Non wetting problem (3 messages)
SV: [TN] Possible flux contamination issue (3 messages)
SV: [TN] SV: [TN] Non wetting problem (1 message)
SV: [TN] SV: [TN] Possible flux contamination issue (1 message)
SV: [TN] Vacuum Assembly (1 message)
TechNet Digest - 26 Apr 2008 to 28 Apr 2008 (#2008-114) (3 messages)
Thick PCB potential issues (3 messages)
Thru hole soldering, capping off a barrel (1 message)
Tin Whisker public sector news articles (1 message)
Upcoming IPC Compliance Webcast Series - May 15 & 22 2008! (1 message)
use of the same reflow oven for Pb-free and Sn Pb reflow (2 messages)
Vacuum Assembly (7 messages)
Various questions (9 messages)
Via barrel cracks (22 messages)
[LF] The Cost of EU RoHS: $32.7B (7 messages)
[LF] USG-Industry Meeting on APEC Discussions Regarding REACH, RoHS and EUP (1 message)
[NTC] Environmentally friendly electronics training course (3 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

<List>[TN] IPC4101B Questions

Re: <List>[TN] IPC4101B Questions

Jendon, Terry

Fri, 18 Apr 2008 07:33:29 -0400

202 lines

Re: <List>[TN] IPC4101B Questions

Grunde Gjertsen

Thu, 17 Apr 2008 22:50:44 +0200

165 lines

Re: <List>[TN] IPC4101B Questions

Jendon, Terry

Thu, 17 Apr 2008 13:18:58 -0400

93 lines

New Thread

Aerospace-NTC

Re: Aerospace-NTC

Douglas O. Pauls

Mon, 21 Apr 2008 06:59:40 -0500

184 lines

Re: Aerospace-NTC

Anil Kher

Sat, 19 Apr 2008 23:08:07 +0530

150 lines

Re: Aerospace-NTC

Douglas O. Pauls

Fri, 18 Apr 2008 15:08:18 -0500

137 lines

Aerospace-NTC

Whittaker, Dewey (EHCOE)

Fri, 18 Apr 2008 07:14:47 -0700

95 lines

New Thread

AOI Machines

Re: AOI Machines

John Queen

Wed, 30 Apr 2008 20:56:29 +0100

66 lines

Re: AOI Machines

Stadem, Richard D.

Wed, 30 Apr 2008 14:02:49 -0500

88 lines

Re: AOI Machines

John Queen

Mon, 28 Apr 2008 18:24:43 +0100

63 lines

Re: AOI Machines

Graham Naisbitt

Mon, 28 Apr 2008 18:20:09 +0100

62 lines

Re: AOI Machines

Sri Maganti

Fri, 25 Apr 2008 13:09:49 -0700

89 lines

AOI Machines

Stadem, Richard D.

Fri, 25 Apr 2008 13:19:14 -0500

35 lines

New Thread

AS9100 and SMT/reflow machine program changes

Re: AS9100 and SMT/reflow machine program changes

Kathy Kuhlow

Wed, 16 Apr 2008 08:22:20 -0500

84 lines

Re: AS9100 and SMT/reflow machine program changes

Franklin D Asbell

Wed, 16 Apr 2008 08:06:28 -0500

82 lines

AS9100 and SMT/reflow machine program changes

Douglas McCall

Wed, 16 Apr 2008 13:51:13 +0100

39 lines

New Thread

Baking Flex boards

Re: Baking Flex boards

Stadem, Richard D.

Tue, 29 Apr 2008 14:01:30 -0500

96 lines

Re: Baking Flex boards

Steve Kelly

Tue, 29 Apr 2008 14:53:01 -0400

62 lines

Baking Flex boards

Bill Dworak

Tue, 29 Apr 2008 11:46:16 -0700

35 lines

New Thread

BGA reballing

Re: BGA reballing

bob wettermann

Fri, 4 Apr 2008 11:33:17 -0700

87 lines

Re: BGA reballing

Werner Engelmaier /*

Wed, 2 Apr 2008 19:22:51 EDT

35 lines

New Thread

Blue Voids

Re: Blue Voids

<>

Tue, 29 Apr 2008 22:59:29 EDT

37 lines

Re: Blue Voids

Tan Geok Ang

Wed, 30 Apr 2008 09:17:53 +0800

150 lines

Re: Blue Voids

Paul Reid

Tue, 29 Apr 2008 15:38:12 -0400

99 lines

Re: Blue Voids

Gabriela Bogdan

Tue, 29 Apr 2008 20:34:22 +0300

90 lines

Re: Blue Voids

Jack Olson

Tue, 29 Apr 2008 12:05:39 -0500

123 lines

Re: Blue Voids

Victor Hernandez

Tue, 29 Apr 2008 11:42:01 -0500

136 lines

Re: Blue Voids

Jack Olson

Tue, 29 Apr 2008 11:31:11 -0500

108 lines

Re: Blue Voids

Victor Hernandez

Tue, 29 Apr 2008 10:08:23 -0500

76 lines

Re: Blue Voids

Victor Hernandez

Tue, 29 Apr 2008 10:07:42 -0500

77 lines

Blue Voids

Jack Olson

Mon, 28 Apr 2008 22:03:08 -0500

51 lines

New Thread

Ceramic filters

Ceramic filters

Tim Oaks

Mon, 28 Apr 2008 08:38:39 -0500

42 lines

New Thread

Chip Shield?

Re: Chip Shield?

John Burke

Wed, 2 Apr 2008 11:58:22 -0700

97 lines

Re: Chip Shield?

Inge

Wed, 2 Apr 2008 19:53:53 +0100

58 lines

Re: Chip Shield?

John Burke

Wed, 2 Apr 2008 11:37:47 -0700

59 lines

Re: Chip Shield?

Sauer, Steve (Xetron)

Wed, 2 Apr 2008 12:58:31 -0500

51 lines

Chip Shield?

Steve Gregory

Wed, 2 Apr 2008 12:08:39 -0500

28 lines

New Thread

clean room cleanliness, and statistical process control

clean room cleanliness, and statistical process control

Louis Hart

Thu, 3 Apr 2008 15:48:39 -0400

50 lines

New Thread

cleanliness in PCB layup

Re: cleanliness in PCB layup

Louis Hart

Thu, 3 Apr 2008 10:33:49 -0400

89 lines

Re: cleanliness in PCB layup

Scott Westheimer

Wed, 2 Apr 2008 21:20:14 -0400

51 lines

Re: cleanliness in PCB layup

Scott Westheimer

Wed, 2 Apr 2008 21:26:27 -0400

65 lines

cleanliness in PCB layup

Louis Hart

Wed, 2 Apr 2008 19:02:57 -0400

36 lines

New Thread

Column Grid Arrays

Re: Column Grid Arrays

Tan Geok Ang

Tue, 15 Apr 2008 19:22:48 +0800

58 lines

Re: Column Grid Arrays

Werner Engelmaier /*

Mon, 14 Apr 2008 09:08:28 EDT

35 lines

Column Grid Arrays

Edwin Louis

Thu, 10 Apr 2008 12:24:51 -0400

24 lines

New Thread

Cracking Ceramic Cap

Re: Cracking Ceramic Cap

Werner Engelmaier /*

Wed, 30 Apr 2008 14:30:10 EDT

35 lines

Re: Cracking Ceramic Cap

Eric Bonatti

Wed, 30 Apr 2008 11:26:02 -0400

87 lines

Re: Cracking Ceramic Cap

Raye Rivera

Tue, 29 Apr 2008 10:54:54 -0500

29 lines

Re: Cracking Ceramic Cap

Gabriela Bogdan

Tue, 29 Apr 2008 18:44:13 +0300

67 lines

Re: Cracking Ceramic Cap

Rex Waygood

Tue, 29 Apr 2008 13:53:25 +0100

82 lines

Re: Cracking Ceramic Cap

Brian Chandler

Tue, 29 Apr 2008 07:02:54 -0500

25 lines

Re: Cracking Ceramic Cap

Werner Engelmaier /*

Mon, 28 Apr 2008 20:21:21 EDT

35 lines

Re: Cracking Ceramic Cap

John Maxwell

Mon, 28 Apr 2008 15:30:57 -0700

76 lines

Re: Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 15:18:29 -0700

47 lines

Re: Cracking Ceramic Cap

Curt McNamara

Mon, 28 Apr 2008 16:57:48 -0500

103 lines

Re: Cracking Ceramic Cap

John Maxwell

Mon, 28 Apr 2008 15:03:56 -0700

87 lines

Re: Cracking Ceramic Cap

Paul Edwards

Mon, 28 Apr 2008 14:10:18 -0700

97 lines

Re: Cracking Ceramic Cap

Stadem, Richard D.

Mon, 28 Apr 2008 16:06:43 -0500

57 lines

Re: Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 14:01:38 -0700

32 lines

Re: Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 13:57:28 -0700

35 lines

Re: Cracking Ceramic Cap

Paul Edwards

Mon, 28 Apr 2008 13:54:59 -0700

102 lines

Re: Cracking Ceramic Cap

Stadem, Richard D.

Mon, 28 Apr 2008 15:54:05 -0500

93 lines

Re: Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 13:49:09 -0700

43 lines

Re: Cracking Ceramic Cap

Roberts, Jon

Mon, 28 Apr 2008 15:42:02 -0500

108 lines

Re: Cracking Ceramic Cap

Bruce Tostevin

Mon, 28 Apr 2008 16:41:12 -0400

86 lines

Re: Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 13:31:45 -0700

47 lines

Re: Cracking Ceramic Cap

Bruce Tostevin

Mon, 28 Apr 2008 16:08:16 -0400

95 lines

Re: Cracking Ceramic Cap

Werner Engelmaier /*

Mon, 28 Apr 2008 15:53:22 EDT

45 lines

Re: Cracking Ceramic Cap

Mike Sewell

Mon, 28 Apr 2008 14:45:16 -0500

96 lines

Re: Cracking Ceramic Cap

David D. Hillman

Mon, 28 Apr 2008 14:41:46 -0500

108 lines

Cracking Ceramic Cap

Ken Bloomquist

Mon, 28 Apr 2008 12:38:03 -0700

58 lines

New Thread

Crystal Damage Question

Re: Crystal Damage Question

Stadem, Richard D.

Tue, 22 Apr 2008 11:25:49 -0500

69 lines

Re: Crystal Damage Question

Werner Engelmaier /*

Tue, 22 Apr 2008 11:37:34 EDT

35 lines

Crystal Damage Question

Leland Woodall

Tue, 22 Apr 2008 11:16:09 -0400

43 lines

New Thread

Crystal Damage Question - Failure Mode

Re: Crystal Damage Question - Failure Mode

Leland Woodall

Thu, 24 Apr 2008 16:40:42 -0400

358 lines

Re: Crystal Damage Question - Failure Mode

Joe Russeau

Thu, 24 Apr 2008 14:14:59 -0400

316 lines

Re: Crystal Damage Question - Failure Mode

Leland Woodall

Thu, 24 Apr 2008 13:31:50 -0400

273 lines

Re: Crystal Damage Question - Failure Mode

Joyce Koo

Thu, 24 Apr 2008 12:00:28 -0400

242 lines

Re: Crystal Damage Question - Failure Mode

Leland Woodall

Thu, 24 Apr 2008 10:40:58 -0400

201 lines

Re: Crystal Damage Question - Failure Mode

Honsowetz, Eric

Thu, 24 Apr 2008 10:12:35 -0400

166 lines

Re: Crystal Damage Question - Failure Mode

Stadem, Richard D.

Tue, 22 Apr 2008 13:13:25 -0500

154 lines

Re: Crystal Damage Question - Failure Mode

Stadem, Richard D.

Tue, 22 Apr 2008 12:49:56 -0500

127 lines

Re: Crystal Damage Question - Failure Mode

Leland Woodall

Tue, 22 Apr 2008 13:25:37 -0400

97 lines

New Thread

Defects related to water wash

Re: Defects related to water wash

SUBSCRIBE technet legg

Sat, 19 Apr 2008 12:24:06 -0500

45 lines

Re: Defects related to water wash

Graham Collins

Fri, 18 Apr 2008 13:42:01 -0300

93 lines

Re: Defects related to water wash

Ken Bloomquist

Fri, 18 Apr 2008 09:34:22 -0700

54 lines

Re: Defects related to water wash

Ray, Carl (GE EntSol, Intelligent Platforms)

Fri, 18 Apr 2008 10:58:48 -0400

175 lines

Re: Defects related to water wash

Charlie Pitarys

Fri, 18 Apr 2008 09:49:17 -0500

125 lines

Re: Defects related to water wash

Hernefjord Ingemar

Thu, 17 Apr 2008 08:38:09 +0200

155 lines

Re: Defects related to water wash

Douglas O. Pauls

Wed, 16 Apr 2008 16:13:46 -0500

168 lines

Re: Defects related to water wash

Whittaker, Dewey (EHCOE)

Wed, 16 Apr 2008 13:33:24 -0700

127 lines

Re: Defects related to water wash

Inge

Tue, 15 Apr 2008 22:01:27 -0700

85 lines

Re: Defects related to water wash

John Burke

Wed, 16 Apr 2008 08:41:57 -0700

86 lines

Re: Defects related to water wash

Ken Bloomquist

Wed, 16 Apr 2008 08:05:58 -0700

52 lines

Defects related to water wash

Ray, Carl (GE EntSol, Intelligent Platforms)

Wed, 16 Apr 2008 10:48:05 -0400

29 lines

New Thread

DEK 265GSX stencil printer

Re: DEK 265GSX stencil printer

Gervascio, Thomas

Tue, 1 Apr 2008 15:13:17 -0400

71 lines

Re: DEK 265GSX stencil printer

Gumpert, Ben

Tue, 1 Apr 2008 14:54:39 -0400

65 lines

Re: DEK 265GSX stencil printer

Eric Castonguay

Tue, 1 Apr 2008 11:45:16 -0700

84 lines

DEK 265GSX stencil printer

Lenny Carter

Tue, 1 Apr 2008 14:34:28 -0400

35 lines

New Thread

ENIG PCB Problem...

Re: ENIG PCB Problem...

Tony Steinke

Tue, 29 Apr 2008 15:04:34 -0400

125 lines

Re: ENIG PCB Problem...

Dan Skweres

Tue, 29 Apr 2008 13:39:56 -0400

89 lines

Re: ENIG PCB Problem...

Joe Hughes

Tue, 29 Apr 2008 10:40:47 -0700

94 lines

Re: ENIG PCB Problem...

Ron Hayashi

Tue, 29 Apr 2008 10:30:05 -0700

88 lines

ENIG PCB Problem...

Steve Gregory

Tue, 29 Apr 2008 12:19:13 -0500

55 lines

New Thread

Environmentally friendly electronics training course

Re: Environmentally friendly electronics training course

Ahne Oosterhof

Thu, 3 Apr 2008 14:28:21 -0700

64 lines

Re: Environmentally friendly electronics training course

Paul Reid

Thu, 3 Apr 2008 12:15:23 -0400

126 lines

Re: Environmentally friendly electronics training course

Brian Ellis

Thu, 3 Apr 2008 12:57:08 +0300

83 lines

Re: Environmentally friendly electronics training course

John Burke

Wed, 2 Apr 2008 15:31:59 -0700

194 lines

Re: Environmentally friendly electronics training course

Werner Engelmaier /*

Wed, 2 Apr 2008 16:37:44 EDT

34 lines

Re: Environmentally friendly electronics training course

R Sedlak

Wed, 2 Apr 2008 13:33:50 -0700

153 lines

Re: Environmentally friendly electronics training course

John Burke

Wed, 2 Apr 2008 12:41:41 -0700

130 lines

Re: Environmentally friendly electronics training course

Inge

Wed, 2 Apr 2008 21:07:38 +0100

93 lines

Re: Environmentally friendly electronics training course

Bev Christian

Wed, 2 Apr 2008 14:46:04 -0400

92 lines

Environmentally friendly electronics training course

John Burke

Wed, 2 Apr 2008 10:58:03 -0700

60 lines

New Thread

EU's decision on the flame retardant deca-BDE

Re: EU's decision on the flame retardant deca-BDE

Raye Rivera

Wed, 23 Apr 2008 16:05:50 -0500

36 lines

EU's decision on the flame retardant deca-BDE

Phil Nutting

Fri, 11 Apr 2008 08:20:42 -0400

36 lines

New Thread

FN Parts--Evidence of Wetting

Re: FN Parts--Evidence of Wetting

Thayer, Wayne

Fri, 11 Apr 2008 09:43:19 -0400

139 lines

Re: FN Parts--Evidence of Wetting

Ioan Tempea

Fri, 11 Apr 2008 09:34:51 -0400

103 lines

Re: FN Parts--Evidence of Wetting

Thayer, Wayne

Fri, 11 Apr 2008 09:27:09 -0400

247 lines

Re: FN Parts--Evidence of Wetting

Bev Christian

Fri, 11 Apr 2008 09:19:24 -0400

219 lines

Re: FN Parts--Evidence of Wetting

Thayer, Wayne

Fri, 11 Apr 2008 09:12:25 -0400

171 lines

Re: FN Parts--Evidence of Wetting

David D. Hillman

Fri, 11 Apr 2008 07:14:37 -0500

96 lines

Re: FN Parts--Evidence of Wetting

Gumpert, Ben

Fri, 11 Apr 2008 07:03:17 -0400

73 lines

FN Parts--Evidence of Wetting

Wayne Thayer

Thu, 10 Apr 2008 21:35:09 -0500

40 lines

New Thread

Fw: <FRIDAY> Virtual Storage, Data Center Report, Availability Summit

Re: Fw: <FRIDAY> Virtual Storage, Data Center Report, Availability Summit

Kathy Kuhlow

Fri, 4 Apr 2008 07:50:54 -0500

173 lines

Re: Fw: <FRIDAY> Virtual Storage, Data Center Report, Availability Summit

Kathy Kuhlow

Fri, 4 Apr 2008 07:47:24 -0500

176 lines

Fw: <FRIDAY> Virtual Storage, Data Center Report, Availability Summit

Randy Bock Sr.

Fri, 4 Apr 2008 08:43:07 -0400

143 lines

New Thread

FW: [LF] FW: RoHS Exemptions: Stakeholder meetings

FW: [LF] FW: RoHS Exemptions: Stakeholder meetings

John Burke

Thu, 24 Apr 2008 10:54:51 -0700

114 lines

New Thread

gauges

Re: gauges

Stadem, Richard D.

Tue, 29 Apr 2008 12:42:35 -0500

99 lines

Re: gauges

Kathy Kuhlow

Tue, 29 Apr 2008 11:22:51 -0500

71 lines

Re: gauges

Ken Bloomquist

Tue, 29 Apr 2008 08:23:17 -0700

44 lines

gauges

Linda Langley

Tue, 29 Apr 2008 10:30:38 -0400

43 lines

New Thread

Gerber Data for the IPC B-24, IPC B-25A

Re: Gerber Data for the IPC B-24, IPC B-25A

Steve Gregory

Tue, 1 Apr 2008 08:09:00 -0500

96 lines

Gerber Data for the IPC B-24, IPC B-25A

Christopher Nash

Tue, 1 Apr 2008 08:54:55 -0400

50 lines

New Thread

Guidelines for setting voltage and current when viewing BGA x-rays

Re: Guidelines for setting voltage and current when viewing BGA x-rays

Bruce Tostevin

Tue, 15 Apr 2008 12:47:52 -0400

95 lines

Re: Guidelines for setting voltage and current when viewing BGA x-rays

Bernard, David

Tue, 15 Apr 2008 12:17:23 +0100

106 lines

Guidelines for setting voltage and current when viewing BGA x-rays

Joe Macko

Mon, 14 Apr 2008 12:45:49 -0700

45 lines

New Thread

Hand Cleaning Chemistry Qualification

Re: Hand Cleaning Chemistry Qualification

Joe Russeau

Wed, 30 Apr 2008 15:36:58 -0400

192 lines

Re: Hand Cleaning Chemistry Qualification

Schaefer, Chris

Wed, 30 Apr 2008 14:26:34 -0500

164 lines

Re: Hand Cleaning Chemistry Qualification

Joe Russeau

Wed, 30 Apr 2008 14:09:02 -0400

127 lines

Re: Hand Cleaning Chemistry Qualification

Bev Christian

Wed, 30 Apr 2008 13:37:24 -0400

95 lines

Hand Cleaning Chemistry Qualification

Chris Schaefer

Wed, 30 Apr 2008 11:58:25 -0500

50 lines

New Thread

http://www.electronicsrecyclingconference.com/ (EOM)

http://www.electronicsrecyclingconference.com/ (EOM)

Joe Fjelstad

Fri, 4 Apr 2008 19:15:23 EDT

22 lines

New Thread

Inward formed L-shaped ribbon lead - solder

Re: Inward formed L-shaped ribbon lead - solder

David D. Hillman

Wed, 16 Apr 2008 09:49:52 -0500

221 lines

Re: Inward formed L-shaped ribbon lead - solder

Thayer, Wayne

Wed, 16 Apr 2008 10:00:40 -0400

173 lines

Re: Inward formed L-shaped ribbon lead - solder

Steve Gregory

Wed, 16 Apr 2008 08:51:09 -0500

142 lines

Re: Inward formed L-shaped ribbon lead - solder

Steve Gregory

Wed, 16 Apr 2008 07:47:35 -0500

106 lines

Re: Inward formed L-shaped ribbon lead - solder

Stadem, Richard D.

Tue, 15 Apr 2008 13:35:06 -0500

93 lines

Inward formed L-shaped ribbon lead - solder

Lamote, Jan

Tue, 15 Apr 2008 18:16:23 +0200

64 lines

New Thread

Ionic Contamination Question

Re: Ionic Contamination Question

Brian Ellis

Tue, 15 Apr 2008 18:34:30 +0300

58 lines

Re: Ionic Contamination Question

Richard Kraszewski

Tue, 15 Apr 2008 10:59:27 -0400

81 lines

Ionic Contamination Question

Todd, Richard

Tue, 15 Apr 2008 10:50:13 -0400

41 lines

New Thread

Ionic Contamination Question (& added info).

Re: Ionic Contamination Question (& added info).

Brian Ellis

Mon, 21 Apr 2008 18:40:45 +0300

519 lines

Re: Ionic Contamination Question (& added info).

Terry L. Munson

Mon, 21 Apr 2008 09:36:37 EDT

378 lines

Re: Ionic Contamination Question (& added info).

Brian Ellis

Mon, 21 Apr 2008 12:11:39 +0300

291 lines

Re: Ionic Contamination Question (& added info).

Hernefjord Ingemar

Mon, 21 Apr 2008 09:35:22 +0200

216 lines

Re: Ionic Contamination Question (& added info).

<>

Fri, 18 Apr 2008 18:31:08 EDT

70 lines

Re: Ionic Contamination Question (& added info).

Terry L. Munson

Fri, 18 Apr 2008 16:35:25 EDT

182 lines

Re: Ionic Contamination Question (& added info).

<>

Fri, 18 Apr 2008 13:53:36 EDT

97 lines

New Thread

IPC Seminar on Future Advanced Packaging Technology

IPC Seminar on Future Advanced Packaging Technology

Michelle Michelotti

Thu, 24 Apr 2008 14:19:30 -0500

67 lines

New Thread

IPC Technical Seminars at National Electronics Week, 17-19 June 2008 - Earls Court, London

IPC Technical Seminars at National Electronics Week, 17-19 June 2008 - Earls Court, London

Michelle Michelotti

Wed, 23 Apr 2008 15:24:11 -0500

99 lines

New Thread

IPC's upcoming Compliance Webcast Series in May 2008! Register Today!

IPC's upcoming Compliance Webcast Series in May 2008! Register Today!

Michelle Michelotti

Tue, 29 Apr 2008 14:12:02 -0500

68 lines

New Thread

IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL

Re: IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL

Cooke, Robert W. (JSC-NT)[SAIC]

Wed, 30 Apr 2008 12:13:46 -0500

91 lines

Re: IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL

Mike Sewell

Wed, 30 Apr 2008 12:12:09 -0500

91 lines

Re: IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL

Ken Bloomquist

Wed, 30 Apr 2008 09:28:36 -0700

57 lines

IPC-J-STD-001D @ 3.9.3 GOLD REMOVAL

David Reed

Wed, 30 Apr 2008 09:29:57 -0500

47 lines

New Thread

IPC4101B Questions

Re: IPC4101B Questions

Jendon, Terry

Fri, 18 Apr 2008 10:19:09 -0400

113 lines

Re: IPC4101B Questions

Whittaker, Dewey (EHCOE)

Fri, 18 Apr 2008 07:09:54 -0700

82 lines

Re: IPC4101B Questions

Werner Engelmaier /*

Thu, 17 Apr 2008 16:51:01 EDT

47 lines

Re: IPC4101B Questions

Stadem, Richard D.

Thu, 17 Apr 2008 12:26:11 -0500

81 lines

IPC4101B Questions

Jendon, Terry

Thu, 17 Apr 2008 12:32:50 -0400

51 lines

New Thread

Lamination press temperature probe cables

Lamination press temperature probe cables

Franklin D Asbell

Mon, 28 Apr 2008 09:01:04 -0500

40 lines

New Thread

Laser PTH Soldering

Re: Laser PTH Soldering

Stadem, Richard D.

Mon, 28 Apr 2008 08:44:15 -0500

52 lines

Laser PTH Soldering

Ray, Carl (GE EntSol, Intelligent Platforms)

Sat, 26 Apr 2008 12:10:12 -0400

25 lines

New Thread

Last Chance to Pre-Register for Reliability Summit in Andover, MA

Last Chance to Pre-Register for Reliability Summit in Andover, MA

Alexandra Curtis

Fri, 11 Apr 2008 15:28:56 -0500

45 lines

New Thread

Last Chance to Register for Hands-on Workshop

Last Chance to Register for Hands-on Workshop

Michelle Michelotti

Tue, 15 Apr 2008 14:44:21 -0500

35 lines

New Thread

Last Chance to Register for IPC's upcoming Hands-On Workshop

Last Chance to Register for IPC's upcoming Hands-On Workshop

Michelle Michelotti

Wed, 9 Apr 2008 10:04:57 -0500

41 lines

New Thread

layer to layer registration?

Re: layer to layer registration?

Lee parker

Tue, 8 Apr 2008 09:57:19 -0400

65 lines

Re: layer to layer registration?

Donald Vischulis

Mon, 7 Apr 2008 21:04:10 -0500

56 lines

layer to layer registration?

Murphy, John

Mon, 7 Apr 2008 10:13:09 -0700

34 lines

New Thread

Material questions

Material questions

Franklin D Asbell

Mon, 28 Apr 2008 15:33:26 -0500

37 lines

New Thread

Metal core PCB

Re: Metal core PCB

Raye Rivera

Wed, 23 Apr 2008 18:23:18 -0500

30 lines

Re: Metal core PCB

Kevin Glidden

Mon, 21 Apr 2008 12:12:40 -0400

67 lines

Re: Metal core PCB

Ted Tontis

Mon, 21 Apr 2008 11:06:57 -0500

103 lines

Re: Metal core PCB

Lenny Carter

Mon, 21 Apr 2008 11:27:31 -0400

69 lines

Metal core PCB

Ioan Tempea

Mon, 21 Apr 2008 11:09:12 -0400

36 lines

New Thread

Need recommended material for a wave profiling pallet

Re: Need recommended material for a wave profiling pallet

<>

Mon, 21 Apr 2008 19:46:03 EDT

56 lines

Re: Need recommended material for a wave profiling pallet

Stadem, Richard D.

Mon, 21 Apr 2008 08:14:33 -0500

122 lines

Re: Need recommended material for a wave profiling pallet

Kevin Glidden

Thu, 17 Apr 2008 09:37:42 -0400

92 lines

Re: Need recommended material for a wave profiling pallet

Douglas McCall

Thu, 17 Apr 2008 15:17:56 +0100

53 lines

Re: Need recommended material for a wave profiling pallet

Stadem, Richard D.

Thu, 17 Apr 2008 07:35:09 -0500

72 lines

Need recommended material for a wave profiling pallet

Phil Nutting

Thu, 17 Apr 2008 08:25:01 -0400

40 lines

New Thread

Non wetting problem

Re: Non wetting problem

John Burke

Mon, 14 Apr 2008 22:22:31 -0700

133 lines

Re: Non wetting problem

Richard Kraszewski

Mon, 14 Apr 2008 22:56:11 -0400

100 lines

Re: Non wetting problem

Igoshev, Vladimir

Mon, 14 Apr 2008 22:04:19 -0400

46 lines

Non wetting problem

Gilbert Min

Tue, 15 Apr 2008 10:47:34 +0900

60 lines

New Thread

NTC article link

NTC article link

Joe Fjelstad

Fri, 4 Apr 2008 12:45:53 EDT

35 lines

New Thread

NTC: Defects related to water wash

Re: NTC: Defects related to water wash

Ahne Oosterhof

Wed, 16 Apr 2008 11:17:28 -0700

59 lines

Re: NTC: Defects related to water wash

Ken Bloomquist

Wed, 16 Apr 2008 09:57:15 -0700

31 lines

Re: NTC: Defects related to water wash

Steve Gregory

Wed, 16 Apr 2008 10:57:49 -0500

120 lines

New Thread

Old Topic - Bottom Side Parts

Re: Old Topic - Bottom Side Parts

Steve Gregory

Tue, 22 Apr 2008 07:24:50 -0500

69 lines

Old Topic - Bottom Side Parts

Gumpert, Ben

Tue, 22 Apr 2008 07:36:35 -0400

34 lines

New Thread

Out Gassing

Re: Out Gassing

Whittaker, Dewey (EHCOE)

Fri, 18 Apr 2008 09:50:12 -0700

125 lines

Re: Out Gassing

David Tremmel

Fri, 18 Apr 2008 11:20:28 -0500

100 lines

Re: Out Gassing

Whittaker, Dewey (EHCOE)

Fri, 18 Apr 2008 09:10:03 -0700

62 lines

Re: Out Gassing

Joyce Koo

Fri, 18 Apr 2008 08:56:52 -0400

68 lines

Re: Out Gassing

Paul Reid

Fri, 18 Apr 2008 08:46:04 -0400

35 lines

Re: Out Gassing

Werner Engelmaier /*

Thu, 17 Apr 2008 17:08:09 EDT

34 lines

Re: Out Gassing

Donald Vischulis

Wed, 16 Apr 2008 20:02:29 -0500

57 lines

Re: Out Gassing

Bob Willis

Wed, 16 Apr 2008 21:33:03 +0100

154 lines

Re: Out Gassing

Mike Sewell

Wed, 16 Apr 2008 14:48:43 -0500

67 lines

Re: Out Gassing

Kathy Kuhlow

Wed, 16 Apr 2008 14:42:14 -0500

123 lines

Re: Out Gassing

Phil Nutting

Wed, 16 Apr 2008 13:38:36 -0400

97 lines

Re: Out Gassing

Igoshev, Vladimir

Wed, 16 Apr 2008 14:40:21 -0400

69 lines

Re: Out Gassing

Joyce Koo

Wed, 16 Apr 2008 14:34:04 -0400

77 lines

Re: Out Gassing

Ken Bloomquist

Wed, 16 Apr 2008 11:32:52 -0700

34 lines

Re: Out Gassing

Stadem, Richard D.

Wed, 16 Apr 2008 13:04:35 -0500

119 lines

Re: Out Gassing

Bob Willis

Wed, 16 Apr 2008 18:51:28 +0100

100 lines

Re: Out Gassing

Stadem, Richard D.

Wed, 16 Apr 2008 12:49:12 -0500

90 lines

Re: Out Gassing

Ken Bloomquist

Wed, 16 Apr 2008 10:31:44 -0700

58 lines

Re: Out Gassing

Steve Gregory

Wed, 16 Apr 2008 12:24:57 -0500

73 lines

Re: Out Gassing

Roger Stoops

Wed, 16 Apr 2008 13:15:00 -0400

89 lines

Re: Out Gassing

Ken Bloomquist

Wed, 16 Apr 2008 10:15:13 -0700

40 lines

Re: Out Gassing

Whittaker, Dewey (EHCOE)

Wed, 16 Apr 2008 10:12:20 -0700

69 lines

Re: Out Gassing

Stadem, Richard D.

Wed, 16 Apr 2008 12:10:52 -0500

71 lines

Re: Out Gassing

Kathy Kuhlow

Wed, 16 Apr 2008 12:08:23 -0500

68 lines

Re: Out Gassing

Joyce Koo

Wed, 16 Apr 2008 13:07:00 -0400

72 lines

Out Gassing

Ken Bloomquist

Wed, 16 Apr 2008 10:03:14 -0700

37 lines

New Thread

PCB Manu in Greece & surrounding countries

PCB Manu in Greece & surrounding countries

<>

Mon, 14 Apr 2008 13:31:17 EDT

36 lines

New Thread

Pcik-n-place equipment

Re: Pcik-n-place equipment

Ray, Carl (GE EntSol, Intelligent Platforms)

Sat, 5 Apr 2008 09:31:56 -0400

197 lines

Re: Pcik-n-place equipment

Bill Kasprzak

Sat, 5 Apr 2008 08:49:31 -0400

143 lines

Re: Pcik-n-place equipment

Stadem, Richard D.

Thu, 3 Apr 2008 09:44:23 -0500

119 lines

Re: Pcik-n-place equipment

Stadem, Richard D.

Thu, 3 Apr 2008 09:34:18 -0500

62 lines

Re: Pcik-n-place equipment

Kong Hui Poh

Wed, 2 Apr 2008 09:30:06 +0800

89 lines

Re: Pcik-n-place equipment

Gervascio, Thomas

Tue, 1 Apr 2008 15:13:49 -0400

86 lines

Pcik-n-place equipment

Lenny Carter

Tue, 1 Apr 2008 14:48:18 -0400

38 lines

New Thread

Pick-n-place equipment

Re: Pick-n-place equipment

Jerry Dengler

Wed, 2 Apr 2008 08:15:37 -0400

196 lines

Re: Pick-n-place equipment

Paul Edwards

Tue, 1 Apr 2008 18:28:49 -0700

164 lines

Re: Pick-n-place equipment

Lenny Carter

Tue, 1 Apr 2008 16:17:08 -0400

101 lines

New Thread

Polymer cored solder spheres Images and sections

Re: Polymer cored solder spheres Images and sections

Victor Hernandez

Thu, 10 Apr 2008 07:01:36 -0500

83 lines

Re: Polymer cored solder spheres Images and sections

Bob Willis

Thu, 10 Apr 2008 09:02:21 +0100

53 lines

New Thread

Polymer cored solder spheres.

Re: Polymer cored solder spheres.

David D. Hillman

Wed, 9 Apr 2008 16:55:29 -0500

100 lines

Re: Polymer cored solder spheres.

Dennis Fritz

Tue, 1 Apr 2008 10:06:51 EDT

39 lines

Re: Polymer cored solder spheres.

Bob Willis

Tue, 1 Apr 2008 14:24:50 +0100

211 lines

Re: Polymer cored solder spheres.

Newland, Scott

Tue, 1 Apr 2008 08:03:29 -0400

171 lines

New Thread

Possible flux contamination issue

Re: Possible flux contamination issue

Brian Ellis

Tue, 15 Apr 2008 16:29:00 +0300

155 lines

Re: Possible flux contamination issue

Steve Kelly

Tue, 15 Apr 2008 08:41:46 -0400

133 lines

Re: Possible flux contamination issue

Steve Kelly

Mon, 14 Apr 2008 13:58:27 -0400

98 lines

Re: Possible flux contamination issue

=?utf-8?B?S2F0aHkgS3VobG93?=

Fri, 11 Apr 2008 18:07:14 +0000

66 lines

Re: Possible flux contamination issue

Stadem, Richard D.

Fri, 11 Apr 2008 11:01:05 -0500

109 lines

Re: Possible flux contamination issue

Brian Ellis

Fri, 11 Apr 2008 18:49:53 +0300

70 lines

Re: Possible flux contamination issue

Stadem, Richard D.

Fri, 11 Apr 2008 10:41:28 -0500

155 lines

Re: Possible flux contamination issue

Kevin Glidden

Fri, 11 Apr 2008 11:39:13 -0400

172 lines

Re: Possible flux contamination issue

Stadem, Richard D.

Fri, 11 Apr 2008 10:13:07 -0500

131 lines

Re: Possible flux contamination issue

Kane, Joseph E (US SSA)

Fri, 11 Apr 2008 11:11:02 -0400

104 lines

Re: Possible flux contamination issue

Steve Kelly

Fri, 11 Apr 2008 10:40:08 -0400

137 lines

Re: Possible flux contamination issue

Brian Ellis

Fri, 11 Apr 2008 17:15:16 +0300

68 lines

Re: Possible flux contamination issue

Igoshev, Vladimir

Fri, 11 Apr 2008 10:06:54 -0400

74 lines

Re: Possible flux contamination issue

Steve Kelly

Fri, 11 Apr 2008 10:02:00 -0400

96 lines

Re: Possible flux contamination issue

Igoshev, Vladimir

Fri, 11 Apr 2008 09:52:12 -0400

49 lines

Possible flux contamination issue

Steve Kelly

Fri, 11 Apr 2008 09:42:31 -0400

49 lines

New Thread

PTH Laminate separation at IP post, cross section

Re: PTH Laminate separation at IP post, cross section

Dwight Mattix

Mon, 14 Apr 2008 07:26:50 -0700

46 lines

PTH Laminate separation at IP post, cross section

Victor Hernandez

Mon, 14 Apr 2008 09:14:52 -0500

28 lines

New Thread

PWB spec Class 2 vs assembly spec Class 3

Re: PWB spec Class 2 vs assembly spec Class 3

Whittaker, Dewey (EHCOE)

Mon, 14 Apr 2008 09:30:00 -0700

182 lines

Re: PWB spec Class 2 vs assembly spec Class 3

Kathy Kuhlow

Mon, 14 Apr 2008 11:23:17 -0500

149 lines

Re: PWB spec Class 2 vs assembly spec Class 3

Whittaker, Dewey (EHCOE)

Mon, 14 Apr 2008 09:03:17 -0700

123 lines

Re: PWB spec Class 2 vs assembly spec Class 3

Stadem, Richard D.

Mon, 14 Apr 2008 09:59:57 -0500

108 lines

Re: PWB spec Class 2 vs assembly spec Class 3

Whittaker, Dewey (EHCOE)

Mon, 14 Apr 2008 07:50:19 -0700

77 lines

Re: PWB spec Class 2 vs assembly spec Class 3

Ted Tontis

Mon, 14 Apr 2008 08:20:17 -0500

66 lines

PWB spec Class 2 vs assembly spec Class 3

Graham Collins

Mon, 14 Apr 2008 10:01:41 -0300

35 lines

New Thread

Question about J-STD-609 (old IPC-1066)

Question about J-STD-609 (old IPC-1066)

Joel Alexander

Thu, 3 Apr 2008 08:23:36 -0400

38 lines

Question about J-STD-609 (old IPC-1066)

Joel Alexander

Tue, 1 Apr 2008 16:33:57 -0400

40 lines

New Thread

question for the "wayback" machine

Re: question for the "wayback" machine

Stadem, Richard D.

Mon, 14 Apr 2008 07:46:13 -0500

62 lines

Re: question for the "wayback" machine

Paul Reid

Sat, 12 Apr 2008 10:35:33 -0400

50 lines

Re: question for the "wayback" machine

Werner Engelmaier /*

Fri, 11 Apr 2008 19:00:48 EDT

32 lines

question for the "wayback" machine

Dwight Mattix

Fri, 11 Apr 2008 13:52:35 -0700

25 lines

New Thread

Reballing and replating

Reballing and replating

Zilber Gil

Mon, 7 Apr 2008 19:00:59 +0200

51 lines

New Thread

Register today for IPC/JISSO's upcoming Advanced Technology Forum!

Register today for IPC/JISSO's upcoming Advanced Technology Forum!

Michelle Michelotti

Tue, 22 Apr 2008 15:16:25 -0500

70 lines

New Thread

Regulators are looking more closely at nanotechnology claims from Th...

Re: Regulators are looking more closely at nanotechnology claims from Th...

Joe Fjelstad

Thu, 24 Apr 2008 12:43:21 EDT

42 lines

New Thread

Regulators are looking more closely at nanotechnology claims from The Economist

Re: Regulators are looking more closely at nanotechnology claims from The Economist

Brian Ellis

Thu, 24 Apr 2008 11:09:06 +0300

157 lines

Regulators are looking more closely at nanotechnology claims from The Economist

Joe Fjelstad

Wed, 23 Apr 2008 17:37:42 EDT

107 lines

New Thread

Rework/touchup of MLCCC chip capacitors and ceramic chip resistors

Rework/touchup of MLCCC chip capacitors and ceramic chip resistors

Stadem, Richard D.

Wed, 30 Apr 2008 15:53:32 -0500

29 lines

New Thread

ROHS – More harm than good? A rticle link from EDN

ROHS – More harm than good? A rticle link from EDN

Joe Fjelstad

Fri, 4 Apr 2008 14:11:54 EDT

29 lines

New Thread

RoHS compliant question!

Re: RoHS compliant question!

Simonik, Dave R. (David)

Mon, 14 Apr 2008 07:27:42 -0400

397 lines

Re: RoHS compliant question!

Wenger, George M.

Sun, 13 Apr 2008 09:00:58 -0400

189 lines

Re: RoHS compliant question!

Inge

Sun, 13 Apr 2008 13:09:31 +0100

243 lines

Re: RoHS compliant question!

Bev Christian

Sun, 13 Apr 2008 07:51:56 -0400

215 lines

Re: RoHS compliant question!

Gumpert, Ben

Sun, 13 Apr 2008 07:45:42 -0400

173 lines

Re: RoHS compliant question!

Luan Nguyen

Sat, 12 Apr 2008 13:26:48 +0700

146 lines

Re: RoHS compliant question!

Whittaker, Dewey (EHCOE)

Fri, 11 Apr 2008 07:17:40 -0700

116 lines

Re: RoHS compliant question!

Bev Christian

Fri, 11 Apr 2008 07:02:30 -0400

80 lines

RoHS compliant question!

Luan Nguyen

Fri, 11 Apr 2008 16:07:15 +0700

41 lines

New Thread

RoHS pronunciation

Re: RoHS pronunciation

George Milad

Sat, 12 Apr 2008 10:51:51 EDT

37 lines

Re: RoHS pronunciation

John Maxwell

Fri, 11 Apr 2008 11:24:57 -0700

123 lines

Re: RoHS pronunciation

Phil Zarrow

Fri, 11 Apr 2008 13:48:08 EDT

73 lines

Re: RoHS pronunciation

Ahne Oosterhof

Fri, 11 Apr 2008 10:41:33 -0700

113 lines

Re: RoHS pronunciation

Inge

Thu, 10 Apr 2008 19:33:55 -0700

68 lines

Re: RoHS pronunciation

Karl Hunsinger

Fri, 11 Apr 2008 13:14:17 -0400

31 lines

Re: RoHS pronunciation

R Sedlak

Fri, 11 Apr 2008 09:54:53 -0700

58 lines

Re: RoHS pronunciation

Joe Fjelstad

Fri, 11 Apr 2008 12:52:54 EDT

42 lines

Re: RoHS pronunciation

John Burke

Fri, 11 Apr 2008 09:36:35 -0700

162 lines

Re: RoHS pronunciation

Nila Young

Fri, 11 Apr 2008 10:35:57 -0600

141 lines

Re: RoHS pronunciation

Jon McDowell

Fri, 11 Apr 2008 10:07:12 -0600

115 lines

Re: RoHS pronunciation

Whittaker, Dewey (EHCOE)

Fri, 11 Apr 2008 08:20:20 -0700

120 lines

Re: RoHS pronunciation

Stadem, Richard D.

Fri, 11 Apr 2008 09:31:21 -0500

92 lines

Re: RoHS pronunciation

Brian Ellis

Fri, 11 Apr 2008 17:21:02 +0300

57 lines

Re: RoHS pronunciation

Werner Engelmaier /*

Fri, 11 Apr 2008 10:01:34 EDT

34 lines

Re: RoHS pronunciation

Mike Fenner

Fri, 11 Apr 2008 14:16:19 +0100

120 lines

Re: RoHS pronunciation

Bill Kasprzak

Fri, 11 Apr 2008 09:07:34 -0400

89 lines

Re: RoHS pronunciation

Stadem, Richard D.

Fri, 11 Apr 2008 07:34:40 -0500

84 lines

Re: RoHS pronunciation

Joyce Koo

Fri, 11 Apr 2008 08:25:12 -0400

103 lines

Re: RoHS pronunciation

Richard Kraszewski

Fri, 11 Apr 2008 08:14:38 -0400

71 lines

Re: RoHS pronunciation

David D. Hillman

Fri, 11 Apr 2008 07:05:57 -0500

93 lines

Re: RoHS pronunciation

Karl Hunsinger

Fri, 11 Apr 2008 08:01:42 -0400

116 lines

Re: RoHS pronunciation

Bev Christian

Fri, 11 Apr 2008 07:59:41 -0400

86 lines

RoHS pronunciation

Karl Hunsinger

Fri, 11 Apr 2008 07:56:59 -0400

40 lines

New Thread

SAC shear strength

Re: SAC shear strength

Bob Willis

Tue, 29 Apr 2008 07:12:23 +0100

98 lines

Re: SAC shear strength

Werner Engelmaier /*

Mon, 28 Apr 2008 14:11:03 EDT

51 lines

SAC shear strength

David Tremmel

Mon, 28 Apr 2008 10:34:17 -0500

58 lines

New Thread

SAC125 and SAC125ni

SAC125 and SAC125ni

David Tremmel

Fri, 11 Apr 2008 09:58:12 -0500

49 lines

New Thread

Samtec QMSS-DP Series Differential Pair Connectors

Re: Samtec QMSS-DP Series Differential Pair Connectors

Ells Berkowitz

Fri, 11 Apr 2008 13:42:42 -0500

67 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Kane, Joseph E (US SSA)

Fri, 11 Apr 2008 10:58:20 -0400

228 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Steve Gregory

Fri, 11 Apr 2008 07:50:07 -0500

187 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Sauer, Steve (Xetron)

Fri, 11 Apr 2008 05:54:51 -0500

132 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Steve Gregory

Thu, 10 Apr 2008 13:44:17 -0500

97 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Sauer, Steve (Xetron)

Thu, 10 Apr 2008 07:05:52 -0500

168 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Sauer, Steve (Xetron)

Thu, 10 Apr 2008 06:59:44 -0500

98 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Tan Geok Ang

Thu, 10 Apr 2008 08:36:03 +0800

148 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

Tan Geok Ang

Thu, 10 Apr 2008 08:32:44 +0800

114 lines

Re: Samtec QMSS-DP Series Differential Pair Connectors

John Burke

Wed, 9 Apr 2008 14:16:18 -0700

70 lines

Samtec QMSS-DP Series Differential Pair Connectors

Sauer, Steve (Xetron)

Wed, 9 Apr 2008 13:23:38 -0500

39 lines

New Thread

Smoke Desnity test, FR4-06 \ NP-170R

Re: Smoke Desnity test, FR4-06 \ NP-170R

Grunde Gjertsen

Fri, 25 Apr 2008 08:28:04 +0200

90 lines

Re: Smoke Desnity test, FR4-06 \ NP-170R

Barbara Burcham

Thu, 24 Apr 2008 08:14:18 -0500

77 lines

Smoke Desnity test, FR4-06 \ NP-170R

Lenny Carter

Wed, 23 Apr 2008 17:58:35 -0400

35 lines

New Thread

Sn62 solder; any negative experience using it???

Re: Sn62 solder; any negative experience using it???

Joe Macko

Wed, 9 Apr 2008 16:04:12 -0700

86 lines

Re: Sn62 solder; any negative experience using it???

Stadem, Richard D.

Wed, 9 Apr 2008 08:49:08 -0500

89 lines

Re: Sn62 solder; any negative experience using it???

Steve Gregory

Wed, 9 Apr 2008 08:13:50 -0500

56 lines

Re: Sn62 solder; any negative experience using it???

Joyce Koo

Wed, 9 Apr 2008 08:10:22 -0400

92 lines

Re: Sn62 solder; any negative experience using it???

Mike Fenner

Wed, 9 Apr 2008 09:10:51 +0100

103 lines

Re: Sn62 solder; any negative experience using it???

Reuven Rokah

Wed, 9 Apr 2008 10:06:52 +0300

59 lines

Re: Sn62 solder; any negative experience using it???

<>

Wed, 9 Apr 2008 09:03:54 +0200

27 lines

Re: Sn62 solder; any negative experience using it???

Hernefjord Ingemar

Wed, 9 Apr 2008 08:34:57 +0200

60 lines

Sn62 solder; any negative experience using it???

- bogert

Tue, 8 Apr 2008 17:27:18 -0400

27 lines

New Thread

Software package to perform fatigue life prediction of solder joints

Re: Software package to perform fatigue life prediction of solder joints

Werner Engelmaier /*

Tue, 29 Apr 2008 14:27:33 EDT

44 lines

Re: Software package to perform fatigue life prediction of solder joints

Joe Fjelstad

Tue, 29 Apr 2008 13:28:01 EDT

234 lines

Re: Software package to perform fatigue life prediction of solder joints

Dennis Fritz

Tue, 29 Apr 2008 11:03:30 EDT

78 lines

Re: Software package to perform fatigue life prediction of solder joints

Bob Willis

Tue, 29 Apr 2008 15:04:02 +0100

136 lines

Re: Software package to perform fatigue life prediction of solder joints

Roberts, Jon

Tue, 29 Apr 2008 08:12:06 -0500

136 lines

Re: Software package to perform fatigue life prediction of solder joints

Bev Christian

Tue, 29 Apr 2008 09:02:25 -0400

144 lines

Software package to perform fatigue life prediction of solder joints

Bruce, David (GB - MAV)

Tue, 29 Apr 2008 04:08:02 -0400

89 lines

New Thread

Solvent-Free Stencil Wiper Roll

Re: Solvent-Free Stencil Wiper Roll

Mike Fenner

Fri, 4 Apr 2008 09:12:34 +0100

83 lines

Solvent-Free Stencil Wiper Roll

Leland Woodall

Thu, 3 Apr 2008 16:58:07 -0400

39 lines

New Thread

Specifying board thickness

Re: Specifying board thickness

Donald Vischulis

Mon, 28 Apr 2008 17:26:28 -0500

66 lines

Re: Specifying board thickness

Karl Hunsinger

Mon, 28 Apr 2008 07:35:57 -0400

85 lines

Re: Specifying board thickness

Grunde Gjertsen

Mon, 28 Apr 2008 10:50:16 +0200

101 lines

Re: Specifying board thickness

Louis Hart

Fri, 25 Apr 2008 17:56:34 -0400

81 lines

Re: Specifying board thickness

Lenny Carter

Fri, 25 Apr 2008 16:14:36 -0400

84 lines

Specifying board thickness

Phil Nutting

Fri, 25 Apr 2008 15:51:31 -0400

54 lines

New Thread

Stencils

Re: Stencils

Graham Collins

Mon, 14 Apr 2008 07:45:55 -0300

109 lines

Re: Stencils

Tim Mack

Fri, 11 Apr 2008 08:43:08 -0500

102 lines

Re: Stencils

Tan Geok Ang

Fri, 11 Apr 2008 21:26:12 +0800

118 lines

Re: Stencils

Fred Cox

Fri, 11 Apr 2008 08:37:52 -0400

75 lines

Re: Stencils

Geert Willems

Fri, 11 Apr 2008 07:12:22 -0500

43 lines

Re: Stencils

EIMCNews

Thu, 10 Apr 2008 07:41:04 -0800

30 lines

Re: Stencils

Lenny Carter

Thu, 10 Apr 2008 10:17:40 -0400

102 lines

Re: Stencils

Fred Cox

Thu, 10 Apr 2008 08:05:31 -0400

74 lines

Re: Stencils

Geert Willems

Thu, 10 Apr 2008 06:41:21 -0500

48 lines

Re: Stencils

Fred Cox

Wed, 9 Apr 2008 08:14:07 -0400

81 lines

Re: Stencils

Ioan Tempea

Wed, 9 Apr 2008 08:04:04 -0400

76 lines

Re: Stencils

Ray, Carl (GE EntSol, Intelligent Platforms)

Tue, 8 Apr 2008 17:30:06 -0400

83 lines

Stencils

David Tremmel

Tue, 8 Apr 2008 16:10:18 -0500

50 lines

New Thread

SV: [TN] Column Grid Arrays

Re: SV: [TN] Column Grid Arrays

Werner Engelmaier /*

Wed, 16 Apr 2008 07:05:13 EDT

40 lines

Re: SV: [TN] Column Grid Arrays

Bob Willis

Wed, 16 Apr 2008 08:49:45 +0100

154 lines

Re: SV: [TN] Column Grid Arrays

Hernefjord Ingemar

Wed, 16 Apr 2008 08:42:20 +0200

62 lines

Re: SV: [TN] Column Grid Arrays

Werner Engelmaier /*

Tue, 15 Apr 2008 18:15:04 EDT

32 lines

SV: [TN] Column Grid Arrays

Hfjord

Tue, 15 Apr 2008 20:21:47 +0200

91 lines

New Thread

SV: [TN] Environmentally friendly electronics training course

Re: SV: [TN] Environmentally friendly electronics training course

Werner Engelmaier /*

Wed, 2 Apr 2008 19:06:40 EDT

34 lines

SV: [TN] Environmentally friendly electronics training course

Hfjord

Wed, 2 Apr 2008 23:16:15 +0200

76 lines

New Thread

SV: [TN] Gold Flash vs. ENIG Solder finish

Re: SV: [TN] Gold Flash vs. ENIG Solder finish

Stadem, Richard D.

Thu, 3 Apr 2008 09:30:09 -0500

186 lines

New Thread

SV: [TN] Guidelines for setting voltage and current when viewing BGA x-rays

SV: [TN] Guidelines for setting voltage and current when viewing BGA x-rays

Hfjord

Tue, 15 Apr 2008 20:05:17 +0200

126 lines

New Thread

SV: [TN] Ionic Contamination Question

Re: SV: [TN] Ionic Contamination Question

Whittaker, Dewey (EHCOE)

Wed, 16 Apr 2008 15:04:58 -0700

217 lines

Re: SV: [TN] Ionic Contamination Question

<>

Wed, 16 Apr 2008 12:59:44 EDT

77 lines

Re: SV: [TN] Ionic Contamination Question

Joe Russeau

Wed, 16 Apr 2008 11:34:42 -0400

279 lines

Re: SV: [TN] Ionic Contamination Question

Brian Ellis

Wed, 16 Apr 2008 17:56:52 +0300

266 lines

Re: SV: [TN] Ionic Contamination Question

Joyce Koo

Wed, 16 Apr 2008 10:41:25 -0400

125 lines

Re: SV: [TN] Ionic Contamination Question

Joe Russeau

Wed, 16 Apr 2008 09:43:11 -0400

186 lines

Re: SV: [TN] Ionic Contamination Question

Phil Nutting

Wed, 16 Apr 2008 08:24:24 -0400

166 lines

Re: SV: [TN] Ionic Contamination Question

Brian Ellis

Wed, 16 Apr 2008 11:12:34 +0300

140 lines

Re: SV: [TN] Ionic Contamination Question

Richard Kraszewski

Tue, 15 Apr 2008 17:15:26 -0400

139 lines

Re: SV: [TN] Ionic Contamination Question

<>

Tue, 15 Apr 2008 16:20:27 EDT

43 lines

SV: [TN] Ionic Contamination Question

Hfjord

Tue, 15 Apr 2008 20:19:14 +0200

106 lines

New Thread

SV: [TN] Ionic Contamination Question (overall vs spot reading)

Re: SV: [TN] Ionic Contamination Question (overall vs spot reading)

Richard Kraszewski

Tue, 15 Apr 2008 19:52:41 -0400

78 lines

Re: SV: [TN] Ionic Contamination Question (overall vs spot reading)

<>

Tue, 15 Apr 2008 19:26:43 EDT

40 lines

New Thread

SV: [TN] Non wetting problem

Re: SV: [TN] Non wetting problem

Stadem, Richard D.

Tue, 15 Apr 2008 13:20:40 -0500

159 lines

Re: SV: [TN] Non wetting problem

Igoshev, Vladimir

Tue, 15 Apr 2008 11:56:59 -0400

91 lines

SV: [TN] Non wetting problem

Hfjord

Tue, 15 Apr 2008 17:51:46 +0200

131 lines

New Thread

SV: [TN] Possible flux contamination issue

Re: SV: [TN] Possible flux contamination issue

Joyce Koo

Wed, 16 Apr 2008 10:52:36 -0400

223 lines

Re: SV: [TN] Possible flux contamination issue

Steve Kelly

Tue, 15 Apr 2008 16:30:08 -0400

225 lines

SV: [TN] Possible flux contamination issue

Hfjord

Tue, 15 Apr 2008 20:12:33 +0200

187 lines

New Thread

SV: [TN] SV: [TN] Non wetting problem

SV: [TN] SV: [TN] Non wetting problem

Hfjord

Tue, 15 Apr 2008 20:02:05 +0200

180 lines

New Thread

SV: [TN] SV: [TN] Possible flux contamination issue

SV: [TN] SV: [TN] Possible flux contamination issue

Hfjord

Tue, 15 Apr 2008 23:47:42 +0200

255 lines

New Thread

SV: [TN] Vacuum Assembly

SV: [TN] Vacuum Assembly

Hfjord

Wed, 2 Apr 2008 16:51:26 +0200

61 lines

New Thread

TechNet Digest - 26 Apr 2008 to 28 Apr 2008 (#2008-114)

Re: TechNet Digest - 26 Apr 2008 to 28 Apr 2008 (#2008-114)

Victor Hernandez

Tue, 29 Apr 2008 14:35:00 -0500

225 lines

Re: TechNet Digest - 26 Apr 2008 to 28 Apr 2008 (#2008-114)

Jack Olson

Tue, 29 Apr 2008 12:39:04 -0500

68 lines

Re: TechNet Digest - 26 Apr 2008 to 28 Apr 2008 (#2008-114)

Jack Olson

Tue, 29 Apr 2008 12:30:42 -0500

95 lines

New Thread

Thick PCB potential issues

Re: Thick PCB potential issues

James Verrette

Mon, 28 Apr 2008 10:07:41 -0400

50 lines

Re: Thick PCB potential issues

Werner Engelmaier /*

Fri, 25 Apr 2008 19:54:33 EDT

43 lines

Thick PCB potential issues

Genny Gibbard

Fri, 25 Apr 2008 14:04:20 -0600

31 lines

New Thread

Thru hole soldering, capping off a barrel

Thru hole soldering, capping off a barrel

Sue Powers-Hartman

Fri, 18 Apr 2008 09:29:53 -0500

32 lines

New Thread

Tin Whisker public sector news articles

Tin Whisker public sector news articles

John Burke

Thu, 3 Apr 2008 07:45:47 -0700

49 lines

New Thread

Upcoming IPC Compliance Webcast Series - May 15 & 22 2008!

Upcoming IPC Compliance Webcast Series - May 15 & 22 2008!

Michelle Michelotti

Thu, 10 Apr 2008 13:50:32 -0500

67 lines

New Thread

use of the same reflow oven for Pb-free and Sn Pb reflow

Re: use of the same reflow oven for Pb-free and Sn Pb reflow

Ken Bloomquist

Thu, 3 Apr 2008 12:17:40 -0800

56 lines

use of the same reflow oven for Pb-free and Sn Pb reflow

Joe Macko

Thu, 3 Apr 2008 12:34:29 -0700

40 lines

New Thread

Vacuum Assembly

Re: Vacuum Assembly

Eric CHRISTISON

Thu, 3 Apr 2008 16:38:42 +0100

79 lines

Re: Vacuum Assembly

Stadem, Richard D.

Thu, 3 Apr 2008 10:15:55 -0500

57 lines

Re: Vacuum Assembly

Brian Chandler

Thu, 3 Apr 2008 06:45:58 -0500

36 lines

Re: Vacuum Assembly

John Burke

Wed, 2 Apr 2008 10:58:03 -0700

60 lines

Re: Vacuum Assembly

Mike Fenner

Wed, 2 Apr 2008 18:39:01 +0100

98 lines

Re: Vacuum Assembly

Creswick, Steven

Wed, 2 Apr 2008 11:32:20 -0400

68 lines

Vacuum Assembly

Brian Chandler

Wed, 2 Apr 2008 09:00:51 -0500

25 lines

New Thread

Various questions

Re: Various questions

Honsowetz, Eric

Thu, 3 Apr 2008 14:37:51 -0400

140 lines

Re: Various questions

Stadem, Richard D.

Thu, 3 Apr 2008 09:52:44 -0500

171 lines

Re: Various questions

Stadem, Richard D.

Thu, 3 Apr 2008 09:49:32 -0500

103 lines

Re: Various questions

Paul Reid

Wed, 2 Apr 2008 09:55:38 -0400

171 lines

Re: Various questions

Joyce Koo

Wed, 2 Apr 2008 07:48:33 -0400

187 lines

Re: Various questions

Karl Hunsinger

Wed, 2 Apr 2008 08:14:58 -0400

68 lines

Re: Various questions

Graham Naisbitt

Wed, 2 Apr 2008 07:18:53 +0100

156 lines

Re: Various questions

Bev Christian

Tue, 1 Apr 2008 23:15:09 -0400

108 lines

Re: Various questions

SAHLI habib

Tue, 1 Apr 2008 16:14:01 +0200

74 lines

New Thread

Via barrel cracks

Re: Via barrel cracks

Ryan Grant

Fri, 25 Apr 2008 15:36:01 -0600

149 lines

Re: Via barrel cracks

Paul Reid

Thu, 24 Apr 2008 09:37:57 -0400

137 lines

Re: Via barrel cracks

Douglas O. Pauls

Wed, 23 Apr 2008 06:56:19 -0500

193 lines

Re: Via barrel cracks

=?GB2312?Q?Paul_O'_Connor?=

Wed, 23 Apr 2008 03:33:47 -0500

38 lines

Re: Via barrel cracks

Scott Westheimer

Tue, 22 Apr 2008 14:08:42 -0400

70 lines

Re: Via barrel cracks

Scott Westheimer

Tue, 22 Apr 2008 20:28:16 -0400

105 lines

Re: Via barrel cracks

Lee parker

Tue, 22 Apr 2008 19:57:59 -0400

199 lines

Re: Via barrel cracks

Dwight Mattix

Tue, 22 Apr 2008 19:19:22 -0700

241 lines

Re: Via barrel cracks

Thayer, Wayne

Tue, 22 Apr 2008 21:26:17 -0400

215 lines

Re: Via barrel cracks

Terry L. Munson

Tue, 22 Apr 2008 23:58:08 +0000

153 lines

Re: Via barrel cracks

Lee parker

Tue, 22 Apr 2008 19:48:11 -0400

102 lines

Re: Via barrel cracks

Werner Engelmaier /*

Tue, 22 Apr 2008 19:33:00 EDT

39 lines

Re: Via barrel cracks

Dwight Mattix

Tue, 22 Apr 2008 16:08:21 -0700

180 lines

Re: Via barrel cracks

stephengregory5849

Tue, 22 Apr 2008 17:53:03 -0500

161 lines

Re: Via barrel cracks

Ryan Grant

Tue, 22 Apr 2008 16:08:33 -0600

127 lines

Re: Via barrel cracks

Franklin D Asbell

Tue, 22 Apr 2008 16:54:37 -0500

93 lines

Re: Via barrel cracks

Thayer, Wayne

Tue, 22 Apr 2008 17:51:18 -0400

146 lines

Re: Via barrel cracks

Ryan Grant

Tue, 22 Apr 2008 15:45:16 -0600

123 lines

Re: Via barrel cracks

Thayer, Wayne

Tue, 22 Apr 2008 17:41:41 -0400

93 lines

Re: Via barrel cracks

Werner Engelmaier /*

Tue, 22 Apr 2008 15:31:18 EDT

75 lines

Re: Via barrel cracks

Lee parker

Tue, 22 Apr 2008 14:18:25 -0400

100 lines

Via barrel cracks

Ryan Grant

Tue, 22 Apr 2008 11:42:46 -0600

60 lines

New Thread

[LF] The Cost of EU RoHS: $32.7B

Re: [LF] The Cost of EU RoHS: $32.7B

Whittaker, Dewey (EHCOE)

Mon, 21 Apr 2008 10:59:17 -0700

182 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Steve Gregory

Mon, 21 Apr 2008 13:30:24 -0500

233 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Joe Fjelstad

Mon, 21 Apr 2008 13:14:46 EDT

186 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Ken Bloomquist

Mon, 21 Apr 2008 09:53:02 -0700

150 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Steve Gregory

Mon, 21 Apr 2008 10:42:08 -0500

158 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Ken Bloomquist

Mon, 21 Apr 2008 08:26:15 -0700

113 lines

Re: [LF] The Cost of EU RoHS: $32.7B

Joe Fjelstad

Sun, 20 Apr 2008 11:51:05 EDT

101 lines

New Thread

[LF] USG-Industry Meeting on APEC Discussions Regarding REACH, RoHS and EUP

Re: [LF] USG-Industry Meeting on APEC Discussions Regarding REACH, RoHS and EUP

John Burke

Fri, 11 Apr 2008 14:00:56 -0700

104 lines

New Thread

[NTC] Environmentally friendly electronics training course

Re: [NTC] Environmentally friendly electronics training course

Brian Ellis

Fri, 4 Apr 2008 10:02:46 +0300

165 lines

Re: [NTC] Environmentally friendly electronics training course

John Burke

Thu, 3 Apr 2008 14:04:35 -0700

129 lines

[NTC] Environmentally friendly electronics training course

Wrobel, Clayton

Thu, 3 Apr 2008 14:34:27 -0400

77 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager