LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


December 2007


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"Grape-ing" (14 messages)
"Grape-ing" update 1 (4 messages)
-----Original Message----- (1 message)
: Tin/Lead plating board, turned tarnish (1 message)
<No subject> (2 messages)
ABZOLV (6 messages)
AW: CE low voltage check list (1 message)
Baking of rigid flex before assembly (1 message)
Baking PWB's to remove moisture (2 messages)
BGA failures after OMPAC underfill (7 messages)
Blind Via Question (3 messages)
Cable CAD Tools (4 messages)
Calculated Impedance vs. CI with coupon (6 messages)
CE low voltage check list (1 message)
Connector Coplanarity (1 message)
Core Quality Issue? (1 message)
Delamination of lead free PCBs (5 messages)
ECWC 11 meeting brochure available (1 message)
Epoxy Adhesive, Fast Cure, High Tensile put (1 message)
Erase to abrade off HASL off circuit cards (5 messages)
FW: IPC-6012 Printed Board Qualification Program (1 message)
FW: shorted feedthus due to silver migration (1 message)
Ghost white marks on LPI solder mask (3 messages)
Gold Finger plating question. (3 messages)
Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy (7 messages)
Happy Christmas with photo's (8 messages)
Henry Rekers is out of the office. (1 message)
Holiday offering (4 messages)
IPC Documents Dealing with Cleanliness? (12 messages)
IPC Documents Dealing with Component Cleanliness? (4 messages)
IPC International Conference on Flexible Circuits, February 12-14, 2008, in Phoenix, Ariz! (1 message)
IPC International Conference on Flexible Circuits, February 12-14, 2008, Phoenix, Ariz. (1 message)
IPC Webcast Series: Product Compliance with Environmental Regulations - December 11, 12, & 13, 2007 (1 message)
IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008 - Las Vegas, Nevada (1 message)
IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, Nev. (1 message)
Laser Soldering vs Selective Soldering (25 messages)
marking to comply with IPC/JEDEC J-STD-609 (1 message)
Mehmet Emin Yaman işyeri dışında. (1 message)
Memory Stick Failure Update (1 message)
Merry Christmas (2 messages)
Merry Christmas and Happy New Year (1 message)
Microwave guys, need help (1 message)
MRP's (2 messages)
MSDS for women - ADDENDUM (1 message)
Naming Convention for HDI Question (1 message)
Need clarification on Table 3-2 (1 message)
Nitrogen Generation for Wave & Selective Soldering (2 messages)
NTC - Happy Christmas with photo's (3 messages)
NTC RE: Christmas plans (1 message)
NTC RE: Even More pix (1 message)
NTC RE: More pix (1 message)
NTC RE: [TN] "Grape-ing" (1 message)
NTC: A turn towards Christmas RE: [TN] Polymer sphere BGA Dummy Component Procurement (3 messages)
NTC: A turn towards Christmas. (2 messages)
NTC: MSDS for women (2 messages)
NTC; Tulsa Ice Storm (13 messages)
open letter to solder manufacturers (3 messages)
Packaging exempt from RoHS???????????? (7 messages)
Packaging out of scope from RoHS???????????? (1 message)
Parylene Coating Removal (9 messages)
PCA washing (1 message)
Polymer sphere BGA Dummy Component Procurement (6 messages)
Randall L Bock/MSD/US/PBI is out of the office. (2 messages)
Reflow Oven Cooling Zone Question (8 messages)
reflow oven for Lead Free recommendation (2 messages)
SAP and SPC? (4 messages)
Season's Greetings (2 messages)
SILVER IMMERSION BOARDS ISSUE (9 messages)
Solithane 113/C113-300 conformal coating (Dipping) (4 messages)
Solvent (4 messages)
Sri Maganti is out of the office. (1 message)
Stacked Via Help (7 messages)
Steinbeck (3 messages)
SV: Merry Christmas from Inge (1 message)
SV: [TN] (1 message)
SV: [TN] ABZOLV (1 message)
SV: [TN] FW: shorted feedthus due to silver migration (2 messages)
SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy (2 messages)
SV: [TN] Holiday offering (1 message)
SV: [TN] Laser Soldering vs Selective Soldering (2 messages)
SV: [TN] MSDS for women - ADDENDUM (1 message)
SV: [TN] NTC: MSDS for women (1 message)
SV: [TN] NTC; Tulsa Ice Storm (8 messages)
SV: [TN] SAP and SPC? (2 messages)
SV: [TN] Season's Greetings (3 messages)
SV: [TN] SV: [TN] FW: shorted feedthus due to silver migration (1 message)
SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy (3 messages)
SV: [TN] SV: [TN] Low Noise Coaxial Cable Question (14 messages)
SV: [TN] SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy (1 message)
SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question (7 messages)
SV: [TN] SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question (3 messages)
SV: [TN] [TN} Roger Board turned tarnished affect the performance (1 message)
Tarnished on the bottom side (Teflon Board) (2 messages)
twists per inch (5 messages)
Upcoming IPC 2008 workshops and webcasts you shouldn't miss (1 message)
UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office. (1 message)
using JEDEC J-STD 609 (4 messages)
Wave solder flux volume measurements (8 messages)
Wave solder machine recommendations? (7 messages)
[TN} Roger Board turned tarnished affect the performance (2 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

"Grape-ing"

"Grape-ing"

Phillip Bavaro <[log in to unmask]>

Thu, 13 Dec 2007 03:05:32 -0800

24 lines

Re: "Grape-ing"

Stadem, Richard D. <[log in to unmask]>

Thu, 13 Dec 2007 13:05:04 -0600

50 lines

Re: "Grape-ing"

Werner Engelmaier /* <[log in to unmask]>

Thu, 13 Dec 2007 14:33:29 EST

36 lines

Re: "Grape-ing"

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 13 Dec 2007 12:42:50 -0700

77 lines

Re: "Grape-ing"

Dwight Mattix <[log in to unmask]>

Thu, 13 Dec 2007 11:45:23 -0800

57 lines

Re: "Grape-ing"

Bill Kasprzak <[log in to unmask]>

Thu, 13 Dec 2007 14:54:55 -0500

120 lines

Re: "Grape-ing"

Dale Ritzen <[log in to unmask]>

Thu, 13 Dec 2007 13:56:22 -0600

76 lines

Re: "Grape-ing"

Stadem, Richard D. <[log in to unmask]>

Thu, 13 Dec 2007 14:43:22 -0600

78 lines

Re: "Grape-ing"

Karl Hunsinger <[log in to unmask]>

Thu, 13 Dec 2007 15:47:24 -0500

54 lines

Re: "Grape-ing"

Dwight Mattix <[log in to unmask]>

Thu, 13 Dec 2007 13:04:00 -0800

81 lines

Re: "Grape-ing"

Guy Ramsey <[log in to unmask]>

Thu, 13 Dec 2007 16:11:34 -0500

68 lines

Re: "Grape-ing"

Miguel Vallejo <[log in to unmask]>

Thu, 13 Dec 2007 13:22:14 -0800

108 lines

Re: "Grape-ing"

Gervascio, Thomas <[log in to unmask]>

Thu, 13 Dec 2007 16:21:31 -0500

99 lines

Re: "Grape-ing"

Mike Fenner <[log in to unmask]>

Fri, 14 Dec 2007 15:19:08 -0000

85 lines

New Thread

"Grape-ing" update 1

Re: "Grape-ing" update 1

Phillip Bavaro <[log in to unmask]>

Thu, 13 Dec 2007 15:44:16 -0800

146 lines

Re: "Grape-ing" update 1

Dwight Mattix <[log in to unmask]>

Thu, 13 Dec 2007 16:19:02 -0800

145 lines

Re: "Grape-ing" update 1

John Burke <[log in to unmask]>

Fri, 14 Dec 2007 00:29:28 -0800

192 lines

Re: "Grape-ing" update 1

Haynes, Kim <[log in to unmask]>

Fri, 14 Dec 2007 10:25:30 -0600

230 lines

New Thread

-----Original Message-----

Re: -----Original Message-----

Ed Popielarski <[log in to unmask]>

Fri, 7 Dec 2007 07:58:51 -0800

119 lines

New Thread

: Tin/Lead plating board, turned tarnish

Re: : Tin/Lead plating board, turned tarnish

Kong Hui Poh <[log in to unmask]>

Sat, 1 Dec 2007 14:46:15 +0800

46 lines

New Thread

<No subject>

<No subject>

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 5 Dec 2007 07:51:19 -0700

29 lines

<No subject>

Phil Nutting <[log in to unmask]>

Wed, 5 Dec 2007 10:00:13 -0500

67 lines

New Thread

ABZOLV

ABZOLV

Gabriela Bogdan <[log in to unmask]>

Fri, 14 Dec 2007 18:43:11 +0200

24 lines

Re: ABZOLV

Brian Ellis <[log in to unmask]>

Fri, 14 Dec 2007 19:05:06 +0200

45 lines

Re: ABZOLV

Gabriela Bogdan <[log in to unmask]>

Fri, 14 Dec 2007 19:22:09 +0200

78 lines

Re: ABZOLV

Brian Ellis <[log in to unmask]>

Sat, 15 Dec 2007 10:37:07 +0200

189 lines

Re: ABZOLV

Gabriela Bogdan <[log in to unmask]>

Sat, 15 Dec 2007 12:19:06 +0200

280 lines

Re: ABZOLV

Phil Nutting <[log in to unmask]>

Mon, 17 Dec 2007 07:59:32 -0500

226 lines

New Thread

AW: CE low voltage check list

AW: CE low voltage check list

Thomas Beneken <[log in to unmask]>

Thu, 13 Dec 2007 08:35:50 +0100

59 lines

New Thread

Baking of rigid flex before assembly

Baking of rigid flex before assembly

Steve Kelly <[log in to unmask]>

Fri, 14 Dec 2007 16:28:02 -0500

40 lines

New Thread

Baking PWB's to remove moisture

Baking PWB's to remove moisture

Sue Powers-hartman <[log in to unmask]>

Mon, 31 Dec 2007 15:45:23 -0600

22 lines

Re: Baking PWB's to remove moisture

Franklin D Asbell <[log in to unmask]>

Mon, 31 Dec 2007 16:24:51 -0600

57 lines

New Thread

BGA failures after OMPAC underfill

Re: BGA failures after OMPAC underfill

Gervascio, Thomas <[log in to unmask]>

Tue, 18 Dec 2007 17:07:55 -0500

58 lines

Re: BGA failures after OMPAC underfill

Thayer, Wayne <[log in to unmask]>

Tue, 18 Dec 2007 19:03:08 -0500

101 lines

Re: BGA failures after OMPAC underfill

Werner Engelmaier /* <[log in to unmask]>

Tue, 18 Dec 2007 19:13:35 EST

48 lines

Re: BGA failures after OMPAC underfill

Gervascio, Thomas <[log in to unmask]>

Tue, 18 Dec 2007 19:33:32 -0500

80 lines

Re: BGA failures after OMPAC underfill

Werner Engelmaier /* <[log in to unmask]>

Tue, 18 Dec 2007 22:24:13 EST

41 lines

Re: BGA failures after OMPAC underfill

Yuan-chia Joyce Koo <[log in to unmask]>

Wed, 19 Dec 2007 08:29:27 -0500

69 lines

Re: BGA failures after OMPAC underfill

Stadem, Richard D. <[log in to unmask]>

Wed, 19 Dec 2007 07:56:06 -0600

93 lines

New Thread

Blind Via Question

Blind Via Question

Kane, Joseph E (US SSA) <[log in to unmask]>

Tue, 4 Dec 2007 11:54:00 -0500

30 lines

Re: Blind Via Question

Simonik, Dave R. (David) <[log in to unmask]>

Wed, 5 Dec 2007 07:28:45 -0500

110 lines

Re: Blind Via Question

Dennis Fritz <[log in to unmask]>

Wed, 5 Dec 2007 14:52:23 EST

88 lines

New Thread

Cable CAD Tools

Cable CAD Tools

Kuczynski, Michael (MED US) <[log in to unmask]>

Mon, 10 Dec 2007 14:34:54 -0500

64 lines

Re: Cable CAD Tools

Croslin, Robert <[log in to unmask]>

Mon, 10 Dec 2007 14:45:57 -0500

91 lines

Re: Cable CAD Tools

Wolfe, Robert <[log in to unmask]>

Mon, 10 Dec 2007 15:10:26 -0500

119 lines

Re: Cable CAD Tools

Wilson, Bob <[log in to unmask]>

Mon, 10 Dec 2007 13:02:48 -0800

164 lines

New Thread

Calculated Impedance vs. CI with coupon

Calculated Impedance vs. CI with coupon

Avigdor JAkubinsky <[log in to unmask]>

Mon, 3 Dec 2007 13:08:38 -0600

40 lines

Re: Calculated Impedance vs. CI with coupon

Haynes, Kim <[log in to unmask]>

Mon, 3 Dec 2007 13:37:02 -0600

74 lines

Re: Calculated Impedance vs. CI with coupon

Lee parker <[log in to unmask]>

Mon, 3 Dec 2007 15:48:11 -0500

77 lines

Re: Calculated Impedance vs. CI with coupon

Stadem, Richard D. <[log in to unmask]>

Mon, 3 Dec 2007 15:32:57 -0600

109 lines

Re: Calculated Impedance vs. CI with coupon

Donald Vischulis <[log in to unmask]>

Mon, 3 Dec 2007 17:58:13 -0600

57 lines

Re: Calculated Impedance vs. CI with coupon

Brian Ellis <[log in to unmask]>

Tue, 4 Dec 2007 13:05:54 +0200

67 lines

New Thread

CE low voltage check list

CE low voltage check list

Yuan-chia Joyce Koo <[log in to unmask]>

Wed, 12 Dec 2007 05:13:40 -0500

25 lines

New Thread

Connector Coplanarity

Re: Connector Coplanarity

Roberts, Jon <[log in to unmask]>

Mon, 3 Dec 2007 07:44:58 -0600

68 lines

New Thread

Core Quality Issue?

Re: Core Quality Issue?

Jack Olson <[log in to unmask]>

Wed, 5 Dec 2007 14:27:33 -0600

180 lines

New Thread

Delamination of lead free PCBs

Re: Delamination of lead free PCBs

Genny Gibbard <[log in to unmask]>

Mon, 3 Dec 2007 10:01:31 -0600

150 lines

Re: Delamination of lead free PCBs

Ryan Grant <[log in to unmask]>

Mon, 3 Dec 2007 09:50:46 -0700

204 lines

Re: Delamination of lead free PCBs

Lee parker <[log in to unmask]>

Mon, 3 Dec 2007 12:03:23 -0500

193 lines

Re: Delamination of lead free PCBs

Genny Gibbard <[log in to unmask]>

Mon, 3 Dec 2007 11:13:09 -0600

227 lines

Re: Delamination of lead free PCBs

Lee parker <[log in to unmask]>

Mon, 3 Dec 2007 15:37:21 -0500

250 lines

New Thread

ECWC 11 meeting brochure available

ECWC 11 meeting brochure available

David Bergman <[log in to unmask]>

Fri, 14 Dec 2007 14:07:55 -0600

47 lines

New Thread

Epoxy Adhesive, Fast Cure, High Tensile put

Epoxy Adhesive, Fast Cure, High Tensile put

Victor G. Hernandez <[log in to unmask]>

Fri, 14 Dec 2007 13:36:01 -0600

32 lines

New Thread

Erase to abrade off HASL off circuit cards

Erase to abrade off HASL off circuit cards

Gervascio, Thomas <[log in to unmask]>

Thu, 20 Dec 2007 14:04:17 -0500

32 lines

Re: Erase to abrade off HASL off circuit cards

Guy Ramsey <[log in to unmask]>

Thu, 20 Dec 2007 14:59:23 -0500

61 lines

Re: Erase to abrade off HASL off circuit cards

paulh <[log in to unmask]>

Thu, 20 Dec 2007 14:24:04 -0600

87 lines

Re: Erase to abrade off HASL off circuit cards

McGlaughlin, Jeffrey A <[log in to unmask]>

Thu, 20 Dec 2007 14:50:10 -0500

71 lines

Re: Erase to abrade off HASL off circuit cards

David D. Hillman <[log in to unmask]>

Thu, 20 Dec 2007 15:52:40 -0600

82 lines

New Thread

FW: IPC-6012 Printed Board Qualification Program

FW: IPC-6012 Printed Board Qualification Program

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 11 Dec 2007 09:54:15 -0700

104 lines

New Thread

FW: shorted feedthus due to silver migration

FW: shorted feedthus due to silver migration

Anat Douek <[log in to unmask]>

Mon, 3 Dec 2007 16:09:04 +0200

35 lines

New Thread

Ghost white marks on LPI solder mask

Ghost white marks on LPI solder mask

Charlie Pitarys <[log in to unmask]>

Tue, 11 Dec 2007 14:18:31 -0600

64 lines

Re: Ghost white marks on LPI solder mask

Franklin Asbell <[log in to unmask]>

Tue, 11 Dec 2007 16:00:01 -0600

103 lines

Re: Ghost white marks on LPI solder mask

Brian Ellis <[log in to unmask]>

Wed, 12 Dec 2007 08:57:43 +0200

100 lines

New Thread

Gold Finger plating question.

Gold Finger plating question.

Scott Lefebvre <[log in to unmask]>

Wed, 12 Dec 2007 11:07:17 -0800

39 lines

Re: Gold Finger plating question.

Dwight Mattix <[log in to unmask]>

Wed, 12 Dec 2007 12:02:10 -0800

60 lines

Re: Gold Finger plating question.

Tony Steinke <[log in to unmask]>

Wed, 12 Dec 2007 16:31:16 -0500

85 lines

New Thread

Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Chris Schaefer <[log in to unmask]>

Fri, 28 Dec 2007 10:59:43 -0600

76 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Wenger, George M. <[log in to unmask]>

Fri, 28 Dec 2007 13:04:58 -0500

89 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Werner Engelmaier /* <[log in to unmask]>

Fri, 28 Dec 2007 15:44:24 EST

36 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Schaefer, Chris <[log in to unmask]>

Fri, 28 Dec 2007 14:49:42 -0600

88 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Werner Engelmaier /* <[log in to unmask]>

Fri, 28 Dec 2007 17:32:21 EST

37 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Stadem, Richard D. <[log in to unmask]>

Mon, 31 Dec 2007 09:03:17 -0600

114 lines

Re: Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Schaefer, Chris <[log in to unmask]>

Mon, 31 Dec 2007 13:44:54 -0600

167 lines

New Thread

Happy Christmas with photo's

Happy Christmas with photo's

Graham Naisbitt <[log in to unmask]>

Wed, 19 Dec 2007 14:24:57 +0000

73 lines

Re: Happy Christmas with photo's

Steve Gregory <[log in to unmask]>

Wed, 19 Dec 2007 10:40:00 -0600

129 lines

Re: Happy Christmas with photo's

Ahne Oosterhof <[log in to unmask]>

Wed, 19 Dec 2007 11:49:25 -0800

151 lines

Re: Happy Christmas with photo's

Douglas O. Pauls <[log in to unmask]>

Wed, 19 Dec 2007 15:18:39 -0600

179 lines

Re: Happy Christmas with photo's

Steve Gregory <[log in to unmask]>

Wed, 19 Dec 2007 15:49:08 -0600

213 lines

Re: Happy Christmas with photo's

John Burke <[log in to unmask]>

Wed, 19 Dec 2007 14:39:52 -0800

164 lines

Re: Happy Christmas with photo's

Steve Gregory <[log in to unmask]>

Thu, 20 Dec 2007 08:37:24 -0600

269 lines

Re: Happy Christmas with photo's

Graham Naisbitt <[log in to unmask]>

Thu, 20 Dec 2007 15:01:31 +0000

313 lines

New Thread

Henry Rekers is out of the office.

Henry Rekers is out of the office.

[log in to unmask]

Sun, 2 Dec 2007 04:00:14 -0800

23 lines

New Thread

Holiday offering

Holiday offering

Douglas O. Pauls <[log in to unmask]>

Thu, 20 Dec 2007 09:51:49 -0600

68 lines

Re: Holiday offering

Phil Nutting <[log in to unmask]>

Thu, 20 Dec 2007 11:22:25 -0500

106 lines

Re: Holiday offering

John Burke <[log in to unmask]>

Thu, 20 Dec 2007 09:43:21 -0800

108 lines

Re: Holiday offering

Graham Collins <[log in to unmask]>

Thu, 20 Dec 2007 14:13:17 -0400

139 lines

New Thread

IPC Documents Dealing with Cleanliness?

IPC Documents Dealing with Cleanliness?

Richard Kraszewski <[log in to unmask]>

Wed, 5 Dec 2007 21:30:37 -0500

32 lines

Re: IPC Documents Dealing with Cleanliness?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 6 Dec 2007 06:55:00 -0700

61 lines

Re: IPC Documents Dealing with Cleanliness?

McGlaughlin, Jeffrey A <[log in to unmask]>

Thu, 6 Dec 2007 09:49:00 -0500

94 lines

Re: IPC Documents Dealing with Cleanliness?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 6 Dec 2007 09:15:27 -0700

122 lines

Re: IPC Documents Dealing with Cleanliness?

John Burke <[log in to unmask]>

Thu, 6 Dec 2007 08:20:28 -0800

151 lines

Re: IPC Documents Dealing with Cleanliness?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 6 Dec 2007 09:28:59 -0700

182 lines

Re: IPC Documents Dealing with Cleanliness?

Drew meyer <[log in to unmask]>

Thu, 6 Dec 2007 11:30:31 -0600

24 lines

Re: IPC Documents Dealing with Cleanliness?

Richard Kraszewski <[log in to unmask]>

Thu, 6 Dec 2007 12:53:43 -0500

60 lines

Re: IPC Documents Dealing with Cleanliness?

Douglas O. Pauls <[log in to unmask]>

Fri, 7 Dec 2007 08:13:42 -0600

87 lines

Re: IPC Documents Dealing with Cleanliness?

Graham Naisbitt <[log in to unmask]>

Mon, 10 Dec 2007 17:56:02 +0000

144 lines

Re: IPC Documents Dealing with Cleanliness?

Stadem, Richard D. <[log in to unmask]>

Mon, 10 Dec 2007 12:12:17 -0600

165 lines

Re: IPC Documents Dealing with Cleanliness?

Richard Kraszewski <[log in to unmask]>

Mon, 10 Dec 2007 13:41:31 -0500

194 lines

New Thread

IPC Documents Dealing with Component Cleanliness?

Re: IPC Documents Dealing with Component Cleanliness?

Dennis Fritz <[log in to unmask]>

Thu, 6 Dec 2007 18:08:15 EST

70 lines

Re: IPC Documents Dealing with Component Cleanliness?

Bev Christian <[log in to unmask]>

Thu, 6 Dec 2007 19:14:55 -0500

92 lines

Re: IPC Documents Dealing with Component Cleanliness?

Dennis Fritz <[log in to unmask]>

Thu, 6 Dec 2007 19:38:39 EST

47 lines

Re: IPC Documents Dealing with Component Cleanliness?

Dennis Fritz <[log in to unmask]>

Thu, 6 Dec 2007 19:43:50 EST

42 lines

New Thread

IPC International Conference on Flexible Circuits, February 12-14, 2008, in Phoenix, Ariz!

IPC International Conference on Flexible Circuits, February 12-14, 2008, in Phoenix, Ariz!

Tina Nerad <[log in to unmask]>

Wed, 26 Dec 2007 10:48:29 -0600

142 lines

New Thread

IPC International Conference on Flexible Circuits, February 12-14, 2008, Phoenix, Ariz.

IPC International Conference on Flexible Circuits, February 12-14, 2008, Phoenix, Ariz.

Tina Nerad <[log in to unmask]>

Wed, 12 Dec 2007 15:17:17 -0600

47 lines

New Thread

IPC Webcast Series: Product Compliance with Environmental Regulations - December 11, 12, & 13, 2007

IPC Webcast Series: Product Compliance with Environmental Regulations - December 11, 12, & 13, 2007

Tina Nerad <[log in to unmask]>

Fri, 7 Dec 2007 09:50:38 -0600

84 lines

New Thread

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008 - Las Vegas, Nevada

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008 - Las Vegas, Nevada

Tina Nerad <[log in to unmask]>

Thu, 27 Dec 2007 11:10:59 -0600

57 lines

New Thread

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, Nev.

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, Nev.

Tina Nerad <[log in to unmask]>

Fri, 14 Dec 2007 12:41:50 -0600

49 lines

New Thread

Laser Soldering vs Selective Soldering

Laser Soldering vs Selective Soldering

Ray, Carl (GE Indust, GE Fanuc) <[log in to unmask]>

Thu, 6 Dec 2007 08:56:39 -0500

29 lines

Re: Laser Soldering vs Selective Soldering

Thayer, Wayne <[log in to unmask]>

Thu, 6 Dec 2007 13:03:07 -0500

69 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Thu, 6 Dec 2007 10:20:29 -0800

76 lines

Re: Laser Soldering vs Selective Soldering

Francis Sun <[log in to unmask]>

Thu, 6 Dec 2007 14:20:09 -0500

91 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Thu, 6 Dec 2007 14:41:20 -0800

140 lines

Re: Laser Soldering vs Selective Soldering

Dennis Fritz <[log in to unmask]>

Thu, 6 Dec 2007 20:00:15 EST

53 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Thu, 6 Dec 2007 22:57:13 -0800

106 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Thu, 6 Dec 2007 23:12:18 -0800

126 lines

Re: Laser Soldering vs Selective Soldering

Hernefjord Ingemar <[log in to unmask]>

Fri, 7 Dec 2007 08:58:12 +0100

154 lines

Re: Laser Soldering vs Selective Soldering

Eric CHRISTISON <[log in to unmask]>

Fri, 7 Dec 2007 12:52:35 +0000

144 lines

Re: Laser Soldering vs Selective Soldering

Yuan-chia Joyce Koo <[log in to unmask]>

Fri, 7 Dec 2007 08:24:52 -0500

226 lines

Re: Laser Soldering vs Selective Soldering

Eric CHRISTISON <[log in to unmask]>

Fri, 7 Dec 2007 13:27:53 +0000

239 lines

Re: Laser Soldering vs Selective Soldering

Hernefjord Ingemar <[log in to unmask]>

Fri, 7 Dec 2007 14:29:51 +0100

226 lines

Re: Laser Soldering vs Selective Soldering

Hernefjord Ingemar <[log in to unmask]>

Fri, 7 Dec 2007 14:32:07 +0100

274 lines

Re: Laser Soldering vs Selective Soldering

Stadem, Richard D. <[log in to unmask]>

Fri, 7 Dec 2007 07:35:39 -0600

272 lines

Re: Laser Soldering vs Selective Soldering

Victor G. Hernandez <[log in to unmask]>

Fri, 7 Dec 2007 07:39:17 -0600

297 lines

Re: Laser Soldering vs Selective Soldering

Gumpert, Ben <[log in to unmask]>

Fri, 7 Dec 2007 08:51:19 -0500

255 lines

Re: Laser Soldering vs Selective Soldering

Thayer, Wayne <[log in to unmask]>

Fri, 7 Dec 2007 08:57:04 -0500

286 lines

Re: Laser Soldering vs Selective Soldering

Hernefjord Ingemar <[log in to unmask]>

Fri, 7 Dec 2007 15:22:43 +0100

314 lines

Re: Laser Soldering vs Selective Soldering

Eric CHRISTISON <[log in to unmask]>

Fri, 7 Dec 2007 14:48:31 +0000

272 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Fri, 7 Dec 2007 07:24:03 -0800

376 lines

Re: Laser Soldering vs Selective Soldering

Frederick Miller <[log in to unmask]>

Mon, 10 Dec 2007 08:08:20 -0500

338 lines

Re: Laser Soldering vs Selective Soldering

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 10 Dec 2007 06:52:33 -0700

300 lines

Re: Laser Soldering vs Selective Soldering

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 10 Dec 2007 07:17:50 -0700

166 lines

Re: Laser Soldering vs Selective Soldering

John Burke <[log in to unmask]>

Mon, 10 Dec 2007 06:33:45 -0800

199 lines

New Thread

marking to comply with IPC/JEDEC J-STD-609

marking to comply with IPC/JEDEC J-STD-609

Phil Nutting <[log in to unmask]>

Tue, 4 Dec 2007 09:19:53 -0500

37 lines

New Thread

Mehmet Emin Yaman işyeri dışında.

Mehmet Emin Yaman işyeri dışında.

Mehmet Emin Yaman <[log in to unmask]>

Wed, 26 Dec 2007 22:00:09 +0200

43 lines

New Thread

Memory Stick Failure Update

Memory Stick Failure Update

Croslin, Robert <[log in to unmask]>

Mon, 17 Dec 2007 13:44:47 -0500

56 lines

New Thread

Merry Christmas

Merry Christmas

John Burke <[log in to unmask]>

Thu, 20 Dec 2007 14:39:40 -0800

51 lines

Re: Merry Christmas

Yuan-chia Joyce Koo <[log in to unmask]>

Thu, 20 Dec 2007 19:42:45 -0500

72 lines

New Thread

Merry Christmas and Happy New Year

Merry Christmas and Happy New Year

Joe Russeau <[log in to unmask]>

Fri, 21 Dec 2007 10:09:42 -0500

59 lines

New Thread

Microwave guys, need help

Microwave guys, need help

Hfjord <[log in to unmask]>

Wed, 19 Dec 2007 20:23:48 +0100

38 lines

New Thread

MRP's

Re: MRP's

Graham Naisbitt <[log in to unmask]>

Mon, 31 Dec 2007 10:32:46 +0000

184 lines

Re: MRP's

stephengregory5849 <[log in to unmask]>

Mon, 31 Dec 2007 12:38:28 -0500

227 lines

New Thread

MSDS for women - ADDENDUM

Re: MSDS for women - ADDENDUM

Franklin Asbell <[log in to unmask]>

Sat, 22 Dec 2007 11:20:45 -0600

128 lines

New Thread

Naming Convention for HDI Question

Naming Convention for HDI Question

David Hoover <[log in to unmask]>

Wed, 19 Dec 2007 11:25:16 -0800

39 lines

New Thread

Need clarification on Table 3-2

Need clarification on Table 3-2

Franklin Asbell <[log in to unmask]>

Thu, 6 Dec 2007 15:13:42 -0600

55 lines

New Thread

Nitrogen Generation for Wave & Selective Soldering

Nitrogen Generation for Wave & Selective Soldering

Todd, Richard <[log in to unmask]>

Thu, 13 Dec 2007 10:39:09 -0500

42 lines

Re: Nitrogen Generation for Wave & Selective Soldering

Gervascio, Thomas <[log in to unmask]>

Thu, 13 Dec 2007 11:01:54 -0500

75 lines

New Thread

NTC - Happy Christmas with photo's

Re: NTC - Happy Christmas with photo's

David D. Hillman <[log in to unmask]>

Thu, 20 Dec 2007 09:19:03 -0600

270 lines

Re: NTC - Happy Christmas with photo's

Kevin Glidden <[log in to unmask]>

Thu, 20 Dec 2007 10:39:45 -0500

296 lines

Re: NTC - Happy Christmas with photo's

Graham Collins <[log in to unmask]>

Thu, 20 Dec 2007 12:32:22 -0400

291 lines

New Thread

NTC RE: Christmas plans

NTC RE: Christmas plans

Steve Gregory <[log in to unmask]>

Thu, 20 Dec 2007 15:50:20 -0600

85 lines

New Thread

NTC RE: Even More pix

Re: NTC RE: Even More pix

Steve Gregory <[log in to unmask]>

Thu, 20 Dec 2007 13:41:31 -0600

96 lines

New Thread

NTC RE: More pix

NTC RE: More pix

Steve Gregory <[log in to unmask]>

Thu, 20 Dec 2007 12:35:44 -0600

49 lines

New Thread

NTC RE: [TN] "Grape-ing"

NTC RE: [TN] "Grape-ing"

Stadem, Richard D. <[log in to unmask]>

Thu, 13 Dec 2007 14:42:47 -0600

99 lines

New Thread

NTC: A turn towards Christmas RE: [TN] Polymer sphere BGA Dummy Component Procurement

NTC: A turn towards Christmas RE: [TN] Polymer sphere BGA Dummy Component Procurement

Kathy Kuhlow <[log in to unmask]>

Tue, 11 Dec 2007 11:07:12 -0600

66 lines

Re: NTC: A turn towards Christmas RE: [TN] Polymer sphere BGA Dummy Component Procurement

Colin McVean <[log in to unmask]>

Tue, 11 Dec 2007 17:31:56 -0000

116 lines

Re: NTC: A turn towards Christmas RE: [TN] Polymer sphere BGA Dummy Component Procurement

John Burke <[log in to unmask]>

Tue, 11 Dec 2007 10:46:04 -0800

99 lines

New Thread

NTC: A turn towards Christmas.

Re: NTC: A turn towards Christmas.

Simonik, Dave R. (David) <[log in to unmask]>

Tue, 11 Dec 2007 12:58:37 -0500

135 lines

Re: NTC: A turn towards Christmas.

Chuck Brummer <[log in to unmask]>

Tue, 11 Dec 2007 10:08:54 -0800

172 lines

New Thread

NTC: MSDS for women

NTC: MSDS for women

Brian Ellis <[log in to unmask]>

Sat, 22 Dec 2007 17:05:45 +0200

65 lines

Re: NTC: MSDS for women

Roland Jaquet <[log in to unmask]>

Sat, 22 Dec 2007 16:51:11 +0100

107 lines

New Thread

NTC; Tulsa Ice Storm

NTC; Tulsa Ice Storm

stephengregory5849 <[log in to unmask]>

Mon, 10 Dec 2007 12:12:31 -0600

45 lines

Re: NTC; Tulsa Ice Storm

Stadem, Richard D. <[log in to unmask]>

Mon, 10 Dec 2007 12:21:51 -0600

74 lines

Re: NTC; Tulsa Ice Storm

Croslin, Robert <[log in to unmask]>

Mon, 10 Dec 2007 13:32:59 -0500

74 lines

Re: NTC; Tulsa Ice Storm

David D. Hillman <[log in to unmask]>

Mon, 10 Dec 2007 13:05:54 -0600

90 lines

Re: NTC; Tulsa Ice Storm

Randy Bock Sr. <[log in to unmask]>

Mon, 10 Dec 2007 14:05:29 -0500

103 lines

Re: NTC; Tulsa Ice Storm

John Burke <[log in to unmask]>

Mon, 10 Dec 2007 11:12:17 -0800

121 lines

Re: NTC; Tulsa Ice Storm

Leland Woodall <[log in to unmask]>

Mon, 10 Dec 2007 14:12:25 -0500

84 lines

Re: NTC; Tulsa Ice Storm

John Burke <[log in to unmask]>

Mon, 10 Dec 2007 11:13:58 -0800

123 lines

Re: NTC; Tulsa Ice Storm

David D. Hillman <[log in to unmask]>

Mon, 10 Dec 2007 13:29:59 -0600

152 lines

Re: NTC; Tulsa Ice Storm

John Burke <[log in to unmask]>

Mon, 10 Dec 2007 11:35:27 -0800

185 lines

Re: NTC; Tulsa Ice Storm

Dave Dixon <[log in to unmask]>

Mon, 10 Dec 2007 14:29:55 -0600

57 lines

Re: NTC; Tulsa Ice Storm

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 10 Dec 2007 14:03:21 -0700

100 lines

Re: NTC; Tulsa Ice Storm

Randy Bock Sr. <[log in to unmask]>

Tue, 11 Dec 2007 08:30:23 -0500

104 lines

New Thread

open letter to solder manufacturers

open letter to solder manufacturers

Phil Nutting <[log in to unmask]>

Wed, 19 Dec 2007 08:16:16 -0500

68 lines

Re: open letter to solder manufacturers

David Suraski <[log in to unmask]>

Wed, 19 Dec 2007 08:42:53 -0500

95 lines

Re: open letter to solder manufacturers

Phil Nutting <[log in to unmask]>

Wed, 19 Dec 2007 08:46:13 -0500

127 lines

New Thread

Packaging exempt from RoHS????????????

Packaging exempt from RoHS????????????

Jon McDowell <[log in to unmask]>

Mon, 3 Dec 2007 08:39:04 -0700

26 lines

Re: Packaging exempt from RoHS????????????

Genny Gibbard <[log in to unmask]>

Mon, 3 Dec 2007 10:06:34 -0600

54 lines

Re: Packaging exempt from RoHS????????????

Jon McDowell <[log in to unmask]>

Mon, 3 Dec 2007 10:31:24 -0700

81 lines

Re: Packaging exempt from RoHS????????????

John Burke <[log in to unmask]>

Mon, 3 Dec 2007 10:21:52 -0800

107 lines

Re: Packaging exempt from RoHS????????????

Genny Gibbard <[log in to unmask]>

Mon, 3 Dec 2007 12:46:53 -0600

116 lines

Re: Packaging exempt from RoHS????????????

Jon McDowell <[log in to unmask]>

Mon, 3 Dec 2007 12:36:04 -0700

137 lines

Re: Packaging exempt from RoHS????????????

Geert Willems <[log in to unmask]>

Wed, 12 Dec 2007 03:22:47 -0600

39 lines

New Thread

Packaging out of scope from RoHS????????????

Re: Packaging out of scope from RoHS????????????

Jon McDowell <[log in to unmask]>

Wed, 5 Dec 2007 12:03:17 -0700

144 lines

New Thread

Parylene Coating Removal

Parylene Coating Removal

Sue Powers-Hartman <[log in to unmask]>

Thu, 20 Dec 2007 09:48:43 -0600

26 lines

Re: Parylene Coating Removal

Bill Kasprzak <[log in to unmask]>

Thu, 20 Dec 2007 11:22:42 -0500

75 lines

Re: Parylene Coating Removal

Steve Gregory <[log in to unmask]>

Thu, 20 Dec 2007 10:25:40 -0600

67 lines

Re: Parylene Coating Removal

Douglas O. Pauls <[log in to unmask]>

Thu, 20 Dec 2007 10:29:43 -0600

77 lines

Re: Parylene Coating Removal

Sue Powers-Hartman <[log in to unmask]>

Thu, 20 Dec 2007 09:30:00 -0700

85 lines

Re: Parylene Coating Removal

Graham Collins <[log in to unmask]>

Thu, 20 Dec 2007 12:31:12 -0400

92 lines

Re: Parylene Coating Removal

Douglas O. Pauls <[log in to unmask]>

Thu, 20 Dec 2007 10:32:01 -0600

128 lines

Re: Parylene Coating Removal

Sue Powers-Hartman <[log in to unmask]>

Thu, 20 Dec 2007 09:43:47 -0700

141 lines

Re: Parylene Coating Removal

Joe Macko <[log in to unmask]>

Thu, 27 Dec 2007 12:14:37 -0800

126 lines

New Thread

PCA washing

Re: PCA washing

Stadem, Richard D. <[log in to unmask]>

Tue, 18 Dec 2007 06:51:32 -0600

196 lines

New Thread

Polymer sphere BGA Dummy Component Procurement

Polymer sphere BGA Dummy Component Procurement

David D. Hillman <[log in to unmask]>

Tue, 11 Dec 2007 11:02:11 -0600

31 lines

Re: Polymer sphere BGA Dummy Component Procurement

John Burke <[log in to unmask]>

Tue, 11 Dec 2007 10:43:59 -0800

65 lines

Re: Polymer sphere BGA Dummy Component Procurement

Werner Engelmaier /* <[log in to unmask]>

Tue, 11 Dec 2007 15:53:02 EST

60 lines

Re: Polymer sphere BGA Dummy Component Procurement

Victor G. Hernandez <[log in to unmask]>

Wed, 12 Dec 2007 07:21:22 -0600

99 lines

Re: Polymer sphere BGA Dummy Component Procurement

David D. Hillman <[log in to unmask]>

Wed, 12 Dec 2007 07:26:38 -0600

145 lines

Re: Polymer sphere BGA Dummy Component Procurement

Werner Engelmaier /* <[log in to unmask]>

Wed, 12 Dec 2007 13:56:32 EST

33 lines

New Thread

Randall L Bock/MSD/US/PBI is out of the office.

Randall L Bock/MSD/US/PBI is out of the office.

Randy Bock Sr. <[log in to unmask]>

Thu, 20 Dec 2007 13:16:06 -0500

25 lines

Randall L Bock/MSD/US/PBI is out of the office.

Randy Bock Sr. <[log in to unmask]>

Mon, 31 Dec 2007 17:01:17 -0500

23 lines

New Thread

Reflow Oven Cooling Zone Question

Reflow Oven Cooling Zone Question

Leland Woodall <[log in to unmask]>

Wed, 5 Dec 2007 10:17:48 -0500

42 lines

Re: Reflow Oven Cooling Zone Question

David Tremmel <[log in to unmask]>

Wed, 5 Dec 2007 09:34:07 -0600

99 lines

Re: Reflow Oven Cooling Zone Question

[log in to unmask]

Wed, 5 Dec 2007 11:04:42 EST

38 lines

Re: Reflow Oven Cooling Zone Question

Phillip Bavaro <[log in to unmask]>

Wed, 5 Dec 2007 09:49:25 -0800

75 lines

Re: Reflow Oven Cooling Zone Question

David D. Hillman <[log in to unmask]>

Wed, 5 Dec 2007 12:22:23 -0600

146 lines

Re: Reflow Oven Cooling Zone Question

Werner Engelmaier /* <[log in to unmask]>

Wed, 5 Dec 2007 15:21:27 EST

46 lines

Re: Reflow Oven Cooling Zone Question

Dennis Fritz <[log in to unmask]>

Wed, 5 Dec 2007 15:46:00 EST

65 lines

Re: Reflow Oven Cooling Zone Question

Werner Engelmaier /* <[log in to unmask]>

Wed, 5 Dec 2007 16:19:21 EST

34 lines

New Thread

reflow oven for Lead Free recommendation

reflow oven for Lead Free recommendation

Francis Sun <[log in to unmask]>

Mon, 3 Dec 2007 09:21:42 -0500

38 lines

Re: reflow oven for Lead Free recommendation

Werner Engelmaier /* <[log in to unmask]>

Mon, 3 Dec 2007 21:52:00 EST

40 lines

New Thread

SAP and SPC?

SAP and SPC?

Graham Collins <[log in to unmask]>

Wed, 12 Dec 2007 08:52:51 -0400

41 lines

Re: SAP and SPC?

Hernefjord Ingemar <[log in to unmask]>

Wed, 12 Dec 2007 14:11:19 +0100

67 lines

Re: SAP and SPC?

Randy Bock Sr. <[log in to unmask]>

Wed, 12 Dec 2007 08:13:21 -0500

105 lines

Re: SAP and SPC?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 12 Dec 2007 07:19:40 -0700

79 lines

New Thread

Season's Greetings

Season's Greetings

Brian Ellis <[log in to unmask]>

Sat, 15 Dec 2007 16:26:20 +0200

35 lines

Re: Season's Greetings

Randy Bock Sr. <[log in to unmask]>

Mon, 17 Dec 2007 07:18:19 -0500

92 lines

New Thread

SILVER IMMERSION BOARDS ISSUE

SILVER IMMERSION BOARDS ISSUE

Roberts, Jon <[log in to unmask]>

Mon, 3 Dec 2007 16:30:23 -0600

36 lines

Re: SILVER IMMERSION BOARDS ISSUE

Guy Ramsey <[log in to unmask]>

Tue, 4 Dec 2007 08:57:30 -0500

65 lines

Re: SILVER IMMERSION BOARDS ISSUE

Douglas O. Pauls <[log in to unmask]>

Tue, 4 Dec 2007 08:05:57 -0600

65 lines

Re: SILVER IMMERSION BOARDS ISSUE

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 4 Dec 2007 07:19:54 -0700

96 lines

Re: SILVER IMMERSION BOARDS ISSUE

Roberts, Jon <[log in to unmask]>

Tue, 4 Dec 2007 08:31:19 -0600

109 lines

Re: SILVER IMMERSION BOARDS ISSUE

Douglas O. Pauls <[log in to unmask]>

Tue, 4 Dec 2007 08:35:13 -0600

146 lines

Re: SILVER IMMERSION BOARDS ISSUE

Stadem, Richard D. <[log in to unmask]>

Tue, 4 Dec 2007 09:32:44 -0600

144 lines

Re: SILVER IMMERSION BOARDS ISSUE

Victor G. Hernandez <[log in to unmask]>

Tue, 4 Dec 2007 09:49:36 -0600

171 lines

Re: SILVER IMMERSION BOARDS ISSUE

John Burke <[log in to unmask]>

Tue, 4 Dec 2007 10:17:43 -0800

123 lines

New Thread

Solithane 113/C113-300 conformal coating (Dipping)

Solithane 113/C113-300 conformal coating (Dipping)

Tan Geok Ang <[log in to unmask]>

Wed, 5 Dec 2007 17:10:53 +0800

73 lines

Re: Solithane 113/C113-300 conformal coating (Dipping)

Graham Naisbitt <[log in to unmask]>

Wed, 5 Dec 2007 15:38:40 +0000

175 lines

Re: Solithane 113/C113-300 conformal coating (Dipping)

Douglas O. Pauls <[log in to unmask]>

Wed, 5 Dec 2007 11:28:52 -0600

212 lines

Re: Solithane 113/C113-300 conformal coating (Dipping)

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 5 Dec 2007 10:56:44 -0700

248 lines

New Thread

Solvent

Solvent

John Burke <[log in to unmask]>

Fri, 21 Dec 2007 09:22:00 -0800

54 lines

Re: Solvent

Paul Edwards <[log in to unmask]>

Fri, 21 Dec 2007 09:41:51 -0800

107 lines

Re: Solvent

Guy Ramsey <[log in to unmask]>

Fri, 21 Dec 2007 13:48:03 -0500

77 lines

Re: Solvent

John Burke <[log in to unmask]>

Fri, 21 Dec 2007 12:02:03 -0800

106 lines

New Thread

Sri Maganti is out of the office.

Sri Maganti is out of the office.

Sri Maganti <[log in to unmask]>

Fri, 14 Dec 2007 04:05:16 -0800

35 lines

New Thread

Stacked Via Help

Stacked Via Help

Mark F. Focht <[log in to unmask]>

Wed, 12 Dec 2007 06:24:50 -0600

55 lines

Stacked Via Help

Mark F. Focht <[log in to unmask]>

Wed, 12 Dec 2007 06:36:49 -0600

56 lines

Re: Stacked Via Help

Dwight Mattix <[log in to unmask]>

Wed, 12 Dec 2007 12:00:18 -0800

73 lines

Re: Stacked Via Help

Werner Engelmaier /* <[log in to unmask]>

Wed, 12 Dec 2007 16:20:19 EST

36 lines

Re: Stacked Via Help

Paul Reid <[log in to unmask]>

Thu, 13 Dec 2007 09:20:46 -0500

92 lines

Re: Stacked Via Help

Dwight Mattix <[log in to unmask]>

Thu, 13 Dec 2007 06:57:05 -0800

119 lines

Re: Stacked Via Help

Stephen Pierce <[log in to unmask]>

Thu, 13 Dec 2007 10:47:19 -0800

99 lines

New Thread

Steinbeck

Steinbeck

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 14 Dec 2007 08:40:37 -0700

160 lines

Re: Steinbeck

stephengregory5849 <[log in to unmask]>

Fri, 14 Dec 2007 14:16:32 -0600

51 lines

Re: Steinbeck

Ahne Oosterhof <[log in to unmask]>

Fri, 14 Dec 2007 22:44:33 -0800

181 lines

New Thread

SV: Merry Christmas from Inge

SV: Merry Christmas from Inge

Hfjord <[log in to unmask]>

Fri, 21 Dec 2007 16:47:09 +0100

219 lines

New Thread

SV: [TN]

SV: [TN]

Hfjord <[log in to unmask]>

Wed, 5 Dec 2007 22:36:08 +0100

62 lines

New Thread

SV: [TN] ABZOLV

SV: [TN] ABZOLV

Hfjord <[log in to unmask]>

Sun, 16 Dec 2007 23:22:27 +0100

267 lines

New Thread

SV: [TN] FW: shorted feedthus due to silver migration

SV: [TN] FW: shorted feedthus due to silver migration

Hfjord <[log in to unmask]>

Mon, 3 Dec 2007 22:26:37 +0100

66 lines

Re: SV: [TN] FW: shorted feedthus due to silver migration

Anat Douek <[log in to unmask]>

Tue, 4 Dec 2007 09:11:10 +0200

99 lines

New Thread

SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Hfjord <[log in to unmask]>

Sun, 30 Dec 2007 00:15:53 +0100

182 lines

Re: SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Yuan-chia Joyce Koo <[log in to unmask]>

Sun, 30 Dec 2007 09:02:54 -0500

225 lines

New Thread

SV: [TN] Holiday offering

SV: [TN] Holiday offering

Hfjord <[log in to unmask]>

Thu, 20 Dec 2007 22:57:38 +0100

217 lines

New Thread

SV: [TN] Laser Soldering vs Selective Soldering

SV: [TN] Laser Soldering vs Selective Soldering

Hfjord <[log in to unmask]>

Thu, 6 Dec 2007 23:34:59 +0100

119 lines

SV: [TN] Laser Soldering vs Selective Soldering

Hfjord <[log in to unmask]>

Mon, 10 Dec 2007 23:27:37 +0100

194 lines

New Thread

SV: [TN] MSDS for women - ADDENDUM

SV: [TN] MSDS for women - ADDENDUM

Hfjord <[log in to unmask]>

Sat, 22 Dec 2007 22:33:24 +0100

197 lines

New Thread

SV: [TN] NTC: MSDS for women

SV: [TN] NTC: MSDS for women

Hfjord <[log in to unmask]>

Sat, 22 Dec 2007 17:51:43 +0100

134 lines

New Thread

SV: [TN] NTC; Tulsa Ice Storm

SV: [TN] NTC; Tulsa Ice Storm

Hfjord <[log in to unmask]>

Mon, 10 Dec 2007 23:42:21 +0100

83 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Kathy Kuhlow <[log in to unmask]>

Mon, 10 Dec 2007 16:49:31 -0600

111 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Stadem, Richard D. <[log in to unmask]>

Tue, 11 Dec 2007 06:35:19 -0600

122 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Hernefjord Ingemar <[log in to unmask]>

Tue, 11 Dec 2007 14:19:20 +0100

148 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Bill Kasprzak <[log in to unmask]>

Tue, 11 Dec 2007 08:35:19 -0500

211 lines

SV: [TN] NTC; Tulsa Ice Storm

Hfjord <[log in to unmask]>

Mon, 17 Dec 2007 16:13:02 +0100

131 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Steve Gregory <[log in to unmask]>

Mon, 17 Dec 2007 12:19:58 -0600

38 lines

Re: SV: [TN] NTC; Tulsa Ice Storm

Randy Bock Sr. <[log in to unmask]>

Tue, 18 Dec 2007 06:30:11 -0500

95 lines

New Thread

SV: [TN] SAP and SPC?

SV: [TN] SAP and SPC?

Hfjord <[log in to unmask]>

Wed, 12 Dec 2007 16:46:17 +0100

107 lines

Re: SV: [TN] SAP and SPC?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 12 Dec 2007 08:56:12 -0700

133 lines

New Thread

SV: [TN] Season's Greetings

SV: [TN] Season's Greetings

Hfjord <[log in to unmask]>

Sun, 16 Dec 2007 23:39:49 +0100

72 lines

Re: SV: [TN] Season's Greetings

Ivanoe Pedruzzi <[log in to unmask]>

Mon, 17 Dec 2007 07:13:58 -0000

30 lines

Re: SV: [TN] Season's Greetings

Roland Jaquet <[log in to unmask]>

Mon, 17 Dec 2007 10:05:58 +0100

123 lines

New Thread

SV: [TN] SV: [TN] FW: shorted feedthus due to silver migration

SV: [TN] SV: [TN] FW: shorted feedthus due to silver migration

Hfjord <[log in to unmask]>

Tue, 4 Dec 2007 08:23:50 +0100

128 lines

New Thread

SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Hfjord <[log in to unmask]>

Sun, 30 Dec 2007 16:26:13 +0100

257 lines

Re: SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

David Hoover <[log in to unmask]>

Sun, 30 Dec 2007 09:44:01 -0800

277 lines

Re: SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Yuan-chia Joyce Koo <[log in to unmask]>

Sun, 30 Dec 2007 16:35:33 -0500

329 lines

New Thread

SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Sat, 1 Dec 2007 12:03:21 +0200

215 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Graham Naisbitt <[log in to unmask]>

Sun, 2 Dec 2007 22:00:05 +0000

190 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

John Burke <[log in to unmask]>

Sun, 2 Dec 2007 15:55:21 -0800

233 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Mon, 3 Dec 2007 09:51:38 +0200

278 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Douglas O. Pauls <[log in to unmask]>

Mon, 3 Dec 2007 07:48:20 -0600

227 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 3 Dec 2007 07:13:12 -0700

257 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Douglas O. Pauls <[log in to unmask]>

Mon, 3 Dec 2007 08:24:59 -0600

300 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Mon, 3 Dec 2007 10:29:25 -0500

212 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

John Burke <[log in to unmask]>

Mon, 3 Dec 2007 08:36:46 -0800

310 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Tue, 4 Dec 2007 12:26:34 +0200

325 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hernefjord Ingemar <[log in to unmask]>

Tue, 4 Dec 2007 12:57:44 +0100

329 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Seth Goodman <[log in to unmask]>

Tue, 4 Dec 2007 23:57:24 -0700

240 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hernefjord Ingemar <[log in to unmask]>

Wed, 5 Dec 2007 10:22:27 +0100

249 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Wed, 5 Dec 2007 12:42:52 +0200

284 lines

New Thread

SV: [TN] SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

SV: [TN] SV: [TN] SV: [TN] Hand Soldering Matte Tin over Nickel Flash with SnPb Alloy

Hfjord <[log in to unmask]>

Mon, 31 Dec 2007 15:06:42 +0100

351 lines

New Thread

SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Sat, 1 Dec 2007 11:43:19 +0100

279 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Sat, 1 Dec 2007 13:47:13 +0200

340 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hernefjord Ingemar <[log in to unmask]>

Mon, 3 Dec 2007 13:10:30 +0100

335 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 3 Dec 2007 07:28:32 -0700

326 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Mon, 3 Dec 2007 10:51:14 -0500

368 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Victor G. Hernandez <[log in to unmask]>

Mon, 3 Dec 2007 10:03:50 -0600

408 lines

Re: SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Ahne Oosterhof <[log in to unmask]>

Mon, 3 Dec 2007 08:56:40 -0800

363 lines

New Thread

SV: [TN] SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

SV: [TN] SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Sat, 1 Dec 2007 16:40:02 +0100

389 lines

SV: [TN] SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Mon, 3 Dec 2007 22:20:41 +0100

341 lines

Re: SV: [TN] SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

John Burke <[log in to unmask]>

Mon, 3 Dec 2007 13:41:51 -0800

377 lines

New Thread

SV: [TN] [TN} Roger Board turned tarnished affect the performance

SV: [TN] [TN} Roger Board turned tarnished affect the performance

Hfjord <[log in to unmask]>

Mon, 3 Dec 2007 22:16:17 +0100

72 lines

New Thread

Tarnished on the bottom side (Teflon Board)

Re: Tarnished on the bottom side (Teflon Board)

Kong Hui Poh <[log in to unmask]>

Wed, 12 Dec 2007 20:43:14 +0800

47 lines

Re: Tarnished on the bottom side (Teflon Board)

Hernefjord Ingemar <[log in to unmask]>

Wed, 12 Dec 2007 13:59:15 +0100

81 lines

New Thread

twists per inch

twists per inch

Phil Nutting <[log in to unmask]>

Tue, 11 Dec 2007 10:06:15 -0500

27 lines

Re: twists per inch

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 11 Dec 2007 08:19:59 -0700

55 lines

Re: twists per inch

Thayer, Wayne <[log in to unmask]>

Tue, 11 Dec 2007 10:24:57 -0500

75 lines

Re: twists per inch

Lenny Carter <[log in to unmask]>

Tue, 11 Dec 2007 10:37:36 -0500

70 lines

Re: twists per inch

Randy Bock Sr. <[log in to unmask]>

Tue, 11 Dec 2007 10:57:14 -0500

135 lines

New Thread

Upcoming IPC 2008 workshops and webcasts you shouldn't miss

Upcoming IPC 2008 workshops and webcasts you shouldn't miss

Tina Nerad <[log in to unmask]>

Tue, 11 Dec 2007 13:34:49 -0600

198 lines

New Thread

UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office.

UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office.

Joel Alexander <[log in to unmask]>

Tue, 11 Dec 2007 16:57:12 -0500

24 lines

New Thread

using JEDEC J-STD 609

using JEDEC J-STD 609

Phil Nutting <[log in to unmask]>

Thu, 13 Dec 2007 08:05:03 -0500

39 lines

Re: using JEDEC J-STD 609

Victor G. Hernandez <[log in to unmask]>

Thu, 13 Dec 2007 07:37:17 -0600

66 lines

Re: using JEDEC J-STD 609

Phil Nutting <[log in to unmask]>

Thu, 13 Dec 2007 10:22:23 -0500

97 lines

Re: using JEDEC J-STD 609

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 13 Dec 2007 09:09:47 -0700

125 lines

New Thread

Wave solder flux volume measurements

Re: Wave solder flux volume measurements

Brian Ellis <[log in to unmask]>

Sat, 1 Dec 2007 11:41:09 +0200

89 lines

Re: Wave solder flux volume measurements

Ivanoe Pedruzzi <[log in to unmask]>

Mon, 3 Dec 2007 07:54:32 -0000

34 lines

Re: Wave solder flux volume measurements

Gervascio, Thomas <[log in to unmask]>

Mon, 3 Dec 2007 08:00:05 -0500

78 lines

Re: Wave solder flux volume measurements

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 3 Dec 2007 07:46:08 -0700

78 lines

Re: Wave solder flux volume measurements

Douglas O. Pauls <[log in to unmask]>

Mon, 3 Dec 2007 08:52:25 -0600

125 lines

Re: Wave solder flux volume measurements

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 3 Dec 2007 08:00:36 -0700

162 lines

Re: Wave solder flux volume measurements

Joel Alexander <[log in to unmask]>

Mon, 3 Dec 2007 10:01:01 -0500

108 lines

Re: Wave solder flux volume measurements

Douglas O. Pauls <[log in to unmask]>

Mon, 3 Dec 2007 09:12:05 -0600

152 lines

New Thread

Wave solder machine recommendations?

Wave solder machine recommendations?

Steve Gregory <[log in to unmask]>

Thu, 6 Dec 2007 07:26:27 -0600

39 lines

Re: Wave solder machine recommendations?

Kane, Joseph E (US SSA) <[log in to unmask]>

Thu, 6 Dec 2007 08:45:28 -0500

73 lines

Re: Wave solder machine recommendations?

Phil Nutting <[log in to unmask]>

Thu, 6 Dec 2007 08:47:16 -0500

70 lines

Re: Wave solder machine recommendations?

Bob Arciolla <[log in to unmask]>

Thu, 6 Dec 2007 09:37:09 -0500

73 lines

Re: Wave solder machine recommendations?

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Dec 2007 09:05:01 -0600

106 lines

Re: Wave solder machine recommendations?

Miguel Vallejo <[log in to unmask]>

Thu, 6 Dec 2007 08:22:03 -0800

74 lines

Re: Wave solder machine recommendations?

Gary Camac <[log in to unmask]>

Thu, 6 Dec 2007 13:18:56 -0600

104 lines

New Thread

[TN} Roger Board turned tarnished affect the performance

Re: [TN} Roger Board turned tarnished affect the performance

Kong Hui Poh <[log in to unmask]>

Mon, 3 Dec 2007 23:44:56 +0800

35 lines

Re: [TN} Roger Board turned tarnished affect the performance

Thayer, Wayne <[log in to unmask]>

Mon, 3 Dec 2007 17:07:53 -0500

64 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager