LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


November 2007


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

0201 and 0105 land patterns (1 message)
Accreditation? (3 messages)
AW: [TN] Low Noise Coaxial Cable Question (1 message)
Bare-Board Materials for Lead-Free Soldering (5 messages)
BGA failures after OMPAC underfill (5 messages)
Bill Kasprzak is in California working on your project. (1 message)
Bill Kasprzak is out on a vacation (1 message)
CA - Scwarzenegger vetos AB 48 - CA RoHS expansion (1 message)
Call for Posters - IPC Printed Circuits Expo, APEX and Designers Summit 2008 (1 message)
Check this out (7 messages)
cleaning concerns (3 messages)
Conformal Coating (1 message)
Conformal Coating Breakdown (8 messages)
Conformal Coating Breakdown and Iraqi dust (7 messages)
Conformal Coating masking tolerance (3 messages)
Conformal coating question part 2 (3 messages)
Conformal coating Rework (6 messages)
Conformal coating setup in-house (2 messages)
Connector Coplanarity (2 messages)
Core Quality Issue? (13 messages)
curing my conformal coating (8 messages)
Delamination of lead free PCBs (4 messages)
Don't miss these upcoming IPC workshops in January 2008, San Jose, CA (1 message)
E-cap Removal Technique (4 messages)
ENEPIG FINISH (1 message)
ENIG vs. Immersion Silver (7 messages)
Environmental project management in Electronics (1 message)
Epoxy application (7 messages)
ESD wrist strap testers. (2 messages)
Flux (2 messages)
Flux residues - great balls of fire (5 messages)
FW: Turkey Operations (1 message)
FW: [CN] DHS Appendix A Published in Federal Register Nov 20 2007 (1 message)
FW: [SMART] and now as expected.... China WEEE regulations... (1 message)
FW: [SMART] Norway and RoHS (2 messages)
Green Growth between PCB traces (21 messages)
Green Growth between PCB traces (UNCLASSIFIED) (1 message)
HAST for Flux residue (2 messages)
High Resistance Issues (3 messages)
Higher bake (4 messages)
IC Pkg Substrate Mfg Questions (1 message)
Incoming Cleanliness of PCB's (3 messages)
IPC Materials Declaration Workshop Series, November 27 & 28, 2007, San Jose, CA (1 message)
IPC Materials Declaration Workshops: - December 3rd & 6th, 2007 - Austin, TX (1 message)
IPC Materials Declaration Workshops: November 12 & 13, 2007, Bannockburn, IL (1 message)
IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007 (1 message)
IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007, San Jose, CA (1 message)
IPC upcoming workshops in 2008 - Register now! (1 message)
IPC Webcast (2nd in series) Via Hole Filling Technology and Processes, November 8, 2007 (1 message)
IPC Webcast Series: Product Compliance with Environmental Regulations, December 11, 12, & 13, 2007 (1 message)
IPC Workshops being offered in February 2008, in Phoenix, AZ (1 message)
IPC workshops being offered in Phoenix, AZ in January 2008 (1 message)
IPC Workshops being offered in San Jose, CA - January 2008 (1 message)
IPC's New Webcasts in January 2008 - Sign Up Today! (1 message)
IPC/JEDEC International Conference on Lead-Free Electronics, December 3-5, 2007, Austin, TX (1 message)
IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, NV (1 message)
Large Format PCB - Suppliers? (1 message)
Laser drilling limitations (8 messages)
Lead laws threaten electronics (2 messages)
Low Noise Coaxial Cable Question (2 messages)
Malcom: 5 RPM; brookfield: 10 RPM readings (2 messages)
MIL-P-55110D Amendment3 (11 messages)
no-clean flux residue on connector pins (7 messages)
non wetting (3 messages)
NTC - Kind of Friday Today (1 message)
NTC: Request for posting here. (3 messages)
NTC: Royal Empathy (1 message)
Older Dynascope (1 message)
out of office (1 message)
Palladium Silver Surface Finish (6 messages)
PCA washing (3 messages)
PCB Layout Contractor (1 message)
Plastic PLCC socket rework. (6 messages)
Plugged vias procedures. (1 message)
Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis (7 messages)
Precautionary principal (1 message)
Proposed standard for component process classification (1 message)
Randall L Bock/MSD/US/PBI is out of the office. (1 message)
Request for posting on your TechNet wall (6 messages)
Rohs process on non-rohs assembly (1 message)
RTV contamination and conformal coating (3 messages)
Seeking Speakers for Flex Conference in 2008 (1 message)
Silicone Lens Cleaner Problem (14 messages)
SMT placement equipment capability studies (4 messages)
SN100C process (14 messages)
SN100C process NTC (1 message)
Soldering temp-time (1 message)
Specifications for the Epoxy in Glass/Epoxy Boards (8 messages)
Supplier for Leads... (3 messages)
SV: [TN] Check this out (1 message)
SV: [TN] Conformal Coating Breakdown and Iraqi dust (1 message)
SV: [TN] Low Noise Coaxial Cable Question (5 messages)
SV: [TN] NTC: Royal Empathy (2 messages)
SV: [TN] SV: [TN] Low Noise Coaxial Cable Question (8 messages)
SV: [TN] SV: [TN] NTC: Royal Empathy (1 message)
SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question (1 message)
SV: [TN] [NTC] Dewey and Graham (3 messages)
Tabletop AOI (5 messages)
TH pin clipping and class 3 (2 messages)
Thermal Pads Dimension versus size / Copper Thickness (4 messages)
Tin/Lead plating board, turned tarnish (2 messages)
Turkey Operations (1 message)
un-subscribe (1 message)
UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office. (1 message)
Use of Lubricants for SDRAM Memory Sticks/Sockets (3 messages)
Vacuum Baking of MSDs (10 messages)
verifying BGA underfill coverage (13 messages)
Wave solder flux volume measurements (3 messages)
World class DPMO (2 messages)
[LF] [TN] Vacuum Baking of MSDs (2 messages)
[NTC] Dewey and Graham (2 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

0201 and 0105 land patterns

0201 and 0105 land patterns

Dave Seymour <[log in to unmask]>

Fri, 30 Nov 2007 09:47:36 -0500

57 lines

New Thread

Accreditation?

Accreditation?

Braddock, Iain <[log in to unmask]>

Tue, 27 Nov 2007 16:46:44 -0000

46 lines

Re: Accreditation?

Graham Naisbitt <[log in to unmask]>

Tue, 27 Nov 2007 17:31:22 +0000

94 lines

Re: Accreditation?

Douglas O. Pauls <[log in to unmask]>

Tue, 27 Nov 2007 13:20:02 -0600

154 lines

New Thread

AW: [TN] Low Noise Coaxial Cable Question

AW: [TN] Low Noise Coaxial Cable Question

Thomas Beneken <[log in to unmask]>

Wed, 28 Nov 2007 11:01:03 +0100

121 lines

New Thread

Bare-Board Materials for Lead-Free Soldering

Re: Bare-Board Materials for Lead-Free Soldering

Jack Olson <[log in to unmask]>

Fri, 2 Nov 2007 10:06:45 -0500

104 lines

Re: Bare-Board Materials for Lead-Free Soldering

Dave Seymour <[log in to unmask]>

Fri, 2 Nov 2007 11:24:01 -0400

155 lines

Re: Bare-Board Materials for Lead-Free Soldering

Ian Hanna <[log in to unmask]>

Fri, 2 Nov 2007 11:43:58 -0400

133 lines

Re: Bare-Board Materials for Lead-Free Soldering

Lee parker <[log in to unmask]>

Fri, 2 Nov 2007 13:45:13 -0400

140 lines

Re: Bare-Board Materials for Lead-Free Soldering

Werner Engelmaier /* <[log in to unmask]>

Fri, 2 Nov 2007 14:40:51 EDT

71 lines

New Thread

BGA failures after OMPAC underfill

BGA failures after OMPAC underfill

Gervascio, Thomas <[log in to unmask]>

Mon, 12 Nov 2007 15:33:38 -0500

49 lines

Re: BGA failures after OMPAC underfill

John Burke <[log in to unmask]>

Mon, 12 Nov 2007 14:06:01 -0800

98 lines

Re: BGA failures after OMPAC underfill

Thayer, Wayne <[log in to unmask]>

Mon, 12 Nov 2007 18:19:17 -0500

84 lines

Re: BGA failures after OMPAC underfill

Ioan Tempea <[log in to unmask]>

Tue, 13 Nov 2007 07:42:22 -0500

100 lines

Re: BGA failures after OMPAC underfill

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Nov 2007 15:18:17 -0600

101 lines

New Thread

Bill Kasprzak is in California working on your project.

Bill Kasprzak is in California working on your project.

Bill Kasprzak <[log in to unmask]>

Thu, 1 Nov 2007 18:53:28 -0400

27 lines

New Thread

Bill Kasprzak is out on a vacation

Bill Kasprzak is out on a vacation

Bill Kasprzak <[log in to unmask]>

Fri, 9 Nov 2007 03:06:41 -0500

27 lines

New Thread

CA - Scwarzenegger vetos AB 48 - CA RoHS expansion

CA - Scwarzenegger vetos AB 48 - CA RoHS expansion

John Burke <[log in to unmask]>

Sun, 4 Nov 2007 13:19:49 -0800

56 lines

New Thread

Call for Posters - IPC Printed Circuits Expo, APEX and Designers Summit 2008

Call for Posters - IPC Printed Circuits Expo, APEX and Designers Summit 2008

Toya Richardson <[log in to unmask]>

Wed, 14 Nov 2007 16:42:59 -0600

52 lines

New Thread

Check this out

Check this out

Randy Bock Sr. <[log in to unmask]>

Mon, 5 Nov 2007 11:55:37 -0500

67 lines

Re: Check this out

Ahne Oosterhof <[log in to unmask]>

Mon, 5 Nov 2007 09:27:46 -0800

93 lines

Re: Check this out

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 5 Nov 2007 10:40:48 -0700

102 lines

Re: Check this out

Dale Ritzen <[log in to unmask]>

Mon, 5 Nov 2007 11:45:21 -0600

129 lines

Re: Check this out

John Queen <[log in to unmask]>

Mon, 5 Nov 2007 17:50:24 -0000

202 lines

Re: Check this out

Dale Ritzen <[log in to unmask]>

Mon, 5 Nov 2007 11:55:48 -0600

225 lines

Re: Check this out

Mike Fenner <[log in to unmask]>

Wed, 7 Nov 2007 08:34:30 -0000

224 lines

New Thread

cleaning concerns

Re: cleaning concerns

Hernefjord Ingemar <[log in to unmask]>

Thu, 1 Nov 2007 09:39:54 +0100

292 lines

Re: cleaning concerns

Roland Jaquet <[log in to unmask]>

Thu, 1 Nov 2007 13:11:27 +0100

313 lines

Re: cleaning concerns

Stadem, Richard D. <[log in to unmask]>

Thu, 1 Nov 2007 07:46:26 -0500

328 lines

New Thread

Conformal Coating

Conformal Coating

Christopher Nash <[log in to unmask]>

Wed, 14 Nov 2007 11:59:05 -0500

39 lines

New Thread

Conformal Coating Breakdown

Conformal Coating Breakdown

Gumpert, Ben <[log in to unmask]>

Wed, 14 Nov 2007 07:01:19 -0500

38 lines

Re: Conformal Coating Breakdown

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 07:25:11 -0600

66 lines

Re: Conformal Coating Breakdown

Gumpert, Ben <[log in to unmask]>

Wed, 14 Nov 2007 09:35:59 -0500

80 lines

Re: Conformal Coating Breakdown

Guy Ramsey <[log in to unmask]>

Wed, 14 Nov 2007 09:58:36 -0500

114 lines

Re: Conformal Coating Breakdown

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 10:21:22 -0600

153 lines

Re: Conformal Coating Breakdown

Braddock, Iain <[log in to unmask]>

Wed, 14 Nov 2007 17:10:32 -0000

110 lines

Re: Conformal Coating Breakdown

Ian Hanna <[log in to unmask]>

Wed, 14 Nov 2007 12:25:22 -0500

92 lines

Re: Conformal Coating Breakdown

Hernefjord Ingemar <[log in to unmask]>

Thu, 22 Nov 2007 09:37:18 +0100

64 lines

New Thread

Conformal Coating Breakdown and Iraqi dust

Conformal Coating Breakdown and Iraqi dust

Hernefjord Ingemar <[log in to unmask]>

Mon, 26 Nov 2007 15:11:43 +0100

82 lines

Re: Conformal Coating Breakdown and Iraqi dust

David Douthit <[log in to unmask]>

Mon, 26 Nov 2007 11:05:21 -0700

173 lines

Re: Conformal Coating Breakdown and Iraqi dust

Thayer, Wayne <[log in to unmask]>

Mon, 26 Nov 2007 13:11:08 -0500

62 lines

Re: Conformal Coating Breakdown and Iraqi dust

Hernefjord Ingemar <[log in to unmask]>

Tue, 27 Nov 2007 11:03:28 +0100

73 lines

Re: Conformal Coating Breakdown and Iraqi dust

Victor G. Hernandez <[log in to unmask]>

Tue, 27 Nov 2007 07:54:52 -0600

102 lines

Re: Conformal Coating Breakdown and Iraqi dust

Mike Fenner <[log in to unmask]>

Wed, 28 Nov 2007 10:28:48 -0000

109 lines

Re: Conformal Coating Breakdown and Iraqi dust

Hernefjord Ingemar <[log in to unmask]>

Wed, 28 Nov 2007 13:35:19 +0100

150 lines

New Thread

Conformal Coating masking tolerance

Conformal Coating masking tolerance

Joe Macko <[log in to unmask]>

Tue, 13 Nov 2007 09:48:11 -0800

54 lines

Re: Conformal Coating masking tolerance

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Nov 2007 11:41:35 -0700

82 lines

Re: Conformal Coating masking tolerance

Kevin Glidden <[log in to unmask]>

Tue, 13 Nov 2007 14:43:55 -0500

125 lines

New Thread

Conformal coating question part 2

Conformal coating question part 2

Wilson, Bob <[log in to unmask]>

Wed, 28 Nov 2007 10:43:10 -0800

53 lines

Re: Conformal coating question part 2

Graham Collins <[log in to unmask]>

Wed, 28 Nov 2007 14:52:46 -0400

80 lines

Re: Conformal coating question part 2

Douglas O. Pauls <[log in to unmask]>

Wed, 28 Nov 2007 13:28:47 -0600

108 lines

New Thread

Conformal coating Rework

Conformal coating Rework

Rodney Miller <[log in to unmask]>

Thu, 15 Nov 2007 14:59:32 -0600

86 lines

Re: Conformal coating Rework

Gumpert, Ben <[log in to unmask]>

Mon, 19 Nov 2007 05:52:03 -0500

115 lines

Re: Conformal coating Rework

David Douthit <[log in to unmask]>

Mon, 19 Nov 2007 05:44:21 -0700

168 lines

Re: Conformal coating Rework

Thayer, Wayne <[log in to unmask]>

Mon, 19 Nov 2007 08:09:48 -0500

196 lines

Re: Conformal coating Rework

Gumpert, Ben <[log in to unmask]>

Mon, 19 Nov 2007 08:27:04 -0500

184 lines

Re: Conformal coating Rework

David Douthit <[log in to unmask]>

Mon, 19 Nov 2007 09:50:56 -0700

223 lines

New Thread

Conformal coating setup in-house

Conformal coating setup in-house

Wilson, Bob <[log in to unmask]>

Fri, 16 Nov 2007 10:44:41 -0800

65 lines

Re: Conformal coating setup in-house

Graham Collins <[log in to unmask]>

Mon, 19 Nov 2007 08:30:36 -0400

104 lines

New Thread

Connector Coplanarity

Connector Coplanarity

David Paluck <[log in to unmask]>

Fri, 30 Nov 2007 12:45:27 -0700

31 lines

Re: Connector Coplanarity

Haynes, Kim <[log in to unmask]>

Fri, 30 Nov 2007 15:41:00 -0600

69 lines

New Thread

Core Quality Issue?

Core Quality Issue?

Jack Olson <[log in to unmask]>

Wed, 21 Nov 2007 10:57:33 -0600

52 lines

Re: Core Quality Issue?

Victor G. Hernandez <[log in to unmask]>

Wed, 21 Nov 2007 11:14:42 -0600

88 lines

Re: Core Quality Issue?

John Burke <[log in to unmask]>

Wed, 21 Nov 2007 09:26:26 -0800

120 lines

Re: Core Quality Issue?

Roger Stoops <[log in to unmask]>

Wed, 21 Nov 2007 12:41:44 -0500

87 lines

Re: Core Quality Issue?

Stadem, Richard D. <[log in to unmask]>

Wed, 21 Nov 2007 12:23:37 -0600

80 lines

Re: Core Quality Issue?

Werner Engelmaier /* <[log in to unmask]>

Wed, 21 Nov 2007 13:55:44 EST

43 lines

Re: Core Quality Issue?

Thayer, Wayne <[log in to unmask]>

Wed, 21 Nov 2007 14:31:36 -0500

110 lines

Re: Core Quality Issue?

Geoff Layhe of Lamar Group <[log in to unmask]>

Wed, 21 Nov 2007 20:53:36 -0000

107 lines

Re: Core Quality Issue?

Roland Jaquet <[log in to unmask]>

Thu, 22 Nov 2007 10:30:15 +0100

121 lines

Re: Core Quality Issue?

Jack Olson <[log in to unmask]>

Thu, 22 Nov 2007 10:28:35 -0600

105 lines

Re: Core Quality Issue?

Sherif Refaat <[log in to unmask]>

Thu, 22 Nov 2007 13:10:52 -0500

142 lines

Re: Core Quality Issue?

Dwight Mattix <[log in to unmask]>

Thu, 22 Nov 2007 13:33:01 -0800

180 lines

Re: Core Quality Issue?

[log in to unmask]

Mon, 26 Nov 2007 11:52:36 EST

145 lines

New Thread

curing my conformal coating

curing my conformal coating

Graham Collins <[log in to unmask]>

Thu, 1 Nov 2007 14:00:36 -0300

32 lines

Re: curing my conformal coating

Richard Kraszewski <[log in to unmask]>

Thu, 1 Nov 2007 12:22:20 -0500

72 lines

Re: curing my conformal coating

McGee, Michael <[log in to unmask]>

Thu, 1 Nov 2007 13:29:33 -0400

77 lines

Re: curing my conformal coating

Graham Naisbitt <[log in to unmask]>

Thu, 1 Nov 2007 17:45:04 +0000

124 lines

Re: curing my conformal coating

Graham Naisbitt <[log in to unmask]>

Thu, 1 Nov 2007 17:54:10 +0000

143 lines

Re: curing my conformal coating

Graham Collins <[log in to unmask]>

Thu, 1 Nov 2007 15:25:39 -0300

93 lines

Re: curing my conformal coating

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 5 Nov 2007 07:02:26 -0700

64 lines

Re: curing my conformal coating

Graham Collins <[log in to unmask]>

Mon, 5 Nov 2007 10:07:05 -0400

91 lines

New Thread

Delamination of lead free PCBs

Re: Delamination of lead free PCBs

badri <[log in to unmask]>

Wed, 7 Nov 2007 13:05:55 +0530

94 lines

Re: Delamination of lead free PCBs

Werner Engelmaier /* <[log in to unmask]>

Wed, 7 Nov 2007 08:02:25 EST

72 lines

Re: Delamination of lead free PCBs

Roland Jaquet <[log in to unmask]>

Thu, 8 Nov 2007 12:01:36 +0100

203 lines

Re: Delamination of lead free PCBs

badri <[log in to unmask]>

Fri, 9 Nov 2007 09:14:07 +0530

119 lines

New Thread

Don't miss these upcoming IPC workshops in January 2008, San Jose, CA

Don't miss these upcoming IPC workshops in January 2008, San Jose, CA

Tina Nerad <[log in to unmask]>

Thu, 15 Nov 2007 14:42:44 -0600

104 lines

New Thread

E-cap Removal Technique

E-cap Removal Technique

Leland Woodall <[log in to unmask]>

Wed, 14 Nov 2007 10:02:44 -0500

33 lines

Re: E-cap Removal Technique

Victor G. Hernandez <[log in to unmask]>

Wed, 14 Nov 2007 13:47:21 -0600

63 lines

Re: E-cap Removal Technique

Leland Woodall <[log in to unmask]>

Wed, 14 Nov 2007 15:06:38 -0500

94 lines

Re: E-cap Removal Technique

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 14:13:10 -0600

119 lines

New Thread

ENEPIG FINISH

ENEPIG FINISH

Dan Skweres <[log in to unmask]>

Wed, 28 Nov 2007 12:50:49 -0500

25 lines

New Thread

ENIG vs. Immersion Silver

ENIG vs. Immersion Silver

Phil Nutting <[log in to unmask]>

Thu, 1 Nov 2007 13:57:49 -0400

30 lines

Re: ENIG vs. Immersion Silver

R Sedlak <[log in to unmask]>

Thu, 1 Nov 2007 11:02:14 -0700

55 lines

Re: ENIG vs. Immersion Silver

Lee parker <[log in to unmask]>

Thu, 1 Nov 2007 14:13:57 -0400

67 lines

Re: ENIG vs. Immersion Silver

Franklin D Asbell <[log in to unmask]>

Thu, 1 Nov 2007 12:36:03 -0600

61 lines

Re: ENIG vs. Immersion Silver

Phil Nutting <[log in to unmask]>

Thu, 1 Nov 2007 14:47:59 -0400

96 lines

Re: ENIG vs. Immersion Silver

Franklin D Asbell <[log in to unmask]>

Thu, 1 Nov 2007 13:32:20 -0600

118 lines

Re: ENIG vs. Immersion Silver

Wrobel, Clayton <[log in to unmask]>

Mon, 5 Nov 2007 09:25:00 -0500

67 lines

New Thread

Environmental project management in Electronics

Environmental project management in Electronics

John Burke <[log in to unmask]>

Tue, 13 Nov 2007 12:50:00 -0800

52 lines

New Thread

Epoxy application

Epoxy application

Peter L <[log in to unmask]>

Tue, 20 Nov 2007 17:59:30 -0600

55 lines

Re: Epoxy application

Stadem, Richard D. <[log in to unmask]>

Wed, 21 Nov 2007 07:27:58 -0600

74 lines

Re: Epoxy application

Peter Swanson <[log in to unmask]>

Wed, 21 Nov 2007 15:58:44 -0000

125 lines

Re: Epoxy application

Stadem, Richard D. <[log in to unmask]>

Wed, 21 Nov 2007 12:52:59 -0600

158 lines

Re: Epoxy application

Peter Swanson <[log in to unmask]>

Wed, 21 Nov 2007 19:32:01 -0000

155 lines

Re: Epoxy application

Yuan-chia Joyce Koo <[log in to unmask]>

Wed, 21 Nov 2007 20:03:55 -0500

163 lines

Re: Epoxy application

Peter Swanson <[log in to unmask]>

Thu, 22 Nov 2007 09:32:35 -0000

187 lines

New Thread

ESD wrist strap testers.

Re: ESD wrist strap testers.

Blair Hogg <[log in to unmask]>

Thu, 1 Nov 2007 07:00:54 -0500

62 lines

Re: ESD wrist strap testers.

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 5 Nov 2007 09:13:19 -0700

79 lines

New Thread

Flux

Re: Flux

Graham Naisbitt <[log in to unmask]>

Thu, 1 Nov 2007 11:57:57 +0000

297 lines

Re: Flux

David D. Hillman <[log in to unmask]>

Thu, 1 Nov 2007 18:22:56 -0500

334 lines

New Thread

Flux residues - great balls of fire

Flux residues - great balls of fire

Sylvain Kaufmann <[log in to unmask]>

Fri, 9 Nov 2007 09:11:59 +0100

105 lines

Re: Flux residues - great balls of fire

Brian Ellis <[log in to unmask]>

Fri, 9 Nov 2007 12:56:10 +0200

151 lines

Re: Flux residues - great balls of fire

Sylvain Kaufmann <[log in to unmask]>

Fri, 9 Nov 2007 15:08:35 +0100

218 lines

Re: Flux residues - great balls of fire

Steve Gregory <[log in to unmask]>

Fri, 9 Nov 2007 08:24:50 -0600

141 lines

Re: Flux residues - great balls of fire

Brian Ellis <[log in to unmask]>

Fri, 9 Nov 2007 17:29:42 +0200

164 lines

New Thread

FW: Turkey Operations

FW: Turkey Operations

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 15 Nov 2007 14:10:41 -0700

133 lines

New Thread

FW: [CN] DHS Appendix A Published in Federal Register Nov 20 2007

FW: [CN] DHS Appendix A Published in Federal Register Nov 20 2007

John Burke <[log in to unmask]>

Mon, 26 Nov 2007 09:04:44 -0800

130 lines

New Thread

FW: [SMART] and now as expected.... China WEEE regulations...

FW: [SMART] and now as expected.... China WEEE regulations...

John Burke <[log in to unmask]>

Wed, 28 Nov 2007 11:26:26 -0800

104 lines

New Thread

FW: [SMART] Norway and RoHS

FW: [SMART] Norway and RoHS

John Burke <[log in to unmask]>

Fri, 23 Nov 2007 07:04:10 -0800

100 lines

Re: FW: [SMART] Norway and RoHS

Hernefjord Ingemar <[log in to unmask]>

Mon, 26 Nov 2007 09:01:07 +0100

134 lines

New Thread

Green Growth between PCB traces

Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 12:44:18 -0500

56 lines

Re: Green Growth between PCB traces

Victor G. Hernandez <[log in to unmask]>

Wed, 14 Nov 2007 11:54:00 -0600

91 lines

Re: Green Growth between PCB traces

Phil Nutting <[log in to unmask]>

Wed, 14 Nov 2007 13:47:28 -0500

93 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 12:00:33 -0700

121 lines

Re: Green Growth between PCB traces

Steve Gregory <[log in to unmask]>

Wed, 14 Nov 2007 13:32:40 -0600

101 lines

Re: Green Growth between PCB traces

Kathy Kuhlow <[log in to unmask]>

Wed, 14 Nov 2007 13:47:02 -0600

165 lines

Re: Green Growth between PCB traces

Victor G. Hernandez <[log in to unmask]>

Wed, 14 Nov 2007 13:52:56 -0600

128 lines

Re: Green Growth between PCB traces

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 13:54:59 -0600

119 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 12:56:54 -0700

125 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 13:46:01 -0700

183 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 13:52:27 -0700

170 lines

Re: Green Growth between PCB traces

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 14:57:26 -0600

151 lines

Re: Green Growth between PCB traces

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 14 Nov 2007 14:08:12 -0700

145 lines

Re: Green Growth between PCB traces

Steve Gregory <[log in to unmask]>

Wed, 14 Nov 2007 15:13:21 -0600

221 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Wed, 14 Nov 2007 14:26:53 -0700

242 lines

Re: Green Growth between PCB traces

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 14 Nov 2007 15:12:32 -0700

334 lines

Re: Green Growth between PCB traces

Stadem, Richard D. <[log in to unmask]>

Wed, 14 Nov 2007 16:25:41 -0600

305 lines

Re: Green Growth between PCB traces

Rodney Miller <[log in to unmask]>

Thu, 15 Nov 2007 15:09:58 -0600

35 lines

Re: Green Growth between PCB traces

P. Langeveld <[log in to unmask]>

Mon, 19 Nov 2007 14:32:37 +0100

128 lines

Re: Green Growth between PCB traces

Hernefjord Ingemar <[log in to unmask]>

Thu, 22 Nov 2007 10:03:55 +0100

89 lines

Re: Green Growth between PCB traces

Tom Burek <[log in to unmask]>

Mon, 26 Nov 2007 15:19:49 -0700

141 lines

New Thread

Green Growth between PCB traces (UNCLASSIFIED)

Re: Green Growth between PCB traces (UNCLASSIFIED)

Spann, Phillip J AMRDEC/Yulista <[log in to unmask]>

Wed, 14 Nov 2007 14:55:50 -0600

219 lines

New Thread

HAST for Flux residue

HAST for Flux residue

Ted Tontis <[log in to unmask]>

Thu, 1 Nov 2007 09:16:57 -0500

70 lines

Re: HAST for Flux residue

Brian Ellis <[log in to unmask]>

Thu, 1 Nov 2007 17:00:49 +0200

89 lines

New Thread

High Resistance Issues

High Resistance Issues

Geoff Layhe of Lamar Group <[log in to unmask]>

Tue, 20 Nov 2007 20:46:07 -0000

40 lines

Re: High Resistance Issues

Victor G. Hernandez <[log in to unmask]>

Tue, 20 Nov 2007 15:10:36 -0600

71 lines

Re: High Resistance Issues

Lee parker <[log in to unmask]>

Tue, 20 Nov 2007 16:34:41 -0500

103 lines

New Thread

Higher bake

Higher bake

Genny Gibbard <[log in to unmask]>

Thu, 8 Nov 2007 15:16:52 -0600

36 lines

Re: Higher bake

Sylvain Kaufmann <[log in to unmask]>

Fri, 9 Nov 2007 08:48:52 +0100

92 lines

Re: Higher bake

John Burke <[log in to unmask]>

Fri, 9 Nov 2007 09:19:15 -0800

67 lines

Re: Higher bake

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 9 Nov 2007 13:09:20 -0700

65 lines

New Thread

IC Pkg Substrate Mfg Questions

IC Pkg Substrate Mfg Questions

Richard Snogren <[log in to unmask]>

Thu, 15 Nov 2007 06:34:43 -0700

60 lines

New Thread

Incoming Cleanliness of PCB's

Incoming Cleanliness of PCB's

Richard Kraszewski <[log in to unmask]>

Fri, 23 Nov 2007 09:38:29 -0500

32 lines

Re: Incoming Cleanliness of PCB's

Franklin D Asbell <[log in to unmask]>

Fri, 23 Nov 2007 09:46:41 -0600

66 lines

Re: Incoming Cleanliness of PCB's

Dwight Mattix <[log in to unmask]>

Fri, 23 Nov 2007 07:54:06 -0800

84 lines

New Thread

IPC Materials Declaration Workshop Series, November 27 & 28, 2007, San Jose, CA

IPC Materials Declaration Workshop Series, November 27 & 28, 2007, San Jose, CA

Tina Nerad <[log in to unmask]>

Mon, 19 Nov 2007 14:29:30 -0600

66 lines

New Thread

IPC Materials Declaration Workshops: - December 3rd & 6th, 2007 - Austin, TX

IPC Materials Declaration Workshops: - December 3rd & 6th, 2007 - Austin, TX

Michelle Michelotti <[log in to unmask]>

Fri, 9 Nov 2007 10:53:59 -0600

88 lines

New Thread

IPC Materials Declaration Workshops: November 12 & 13, 2007, Bannockburn, IL

IPC Materials Declaration Workshops: November 12 & 13, 2007, Bannockburn, IL

Tina Nerad <[log in to unmask]>

Wed, 7 Nov 2007 14:30:48 -0600

32 lines

New Thread

IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007

IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007

Tina Nerad <[log in to unmask]>

Wed, 28 Nov 2007 15:38:46 -0600

54 lines

New Thread

IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007, San Jose, CA

IPC Test and Inspection Conference: The Changing World of Test Protocols - Reducing Time to Market, December 10-12, 2007, San Jose, CA

Tina Nerad <[log in to unmask]>

Tue, 20 Nov 2007 12:18:20 -0600

54 lines

New Thread

IPC upcoming workshops in 2008 - Register now!

IPC upcoming workshops in 2008 - Register now!

Tina Nerad <[log in to unmask]>

Wed, 21 Nov 2007 14:42:06 -0600

217 lines

New Thread

IPC Webcast (2nd in series) Via Hole Filling Technology and Processes, November 8, 2007

IPC Webcast (2nd in series) Via Hole Filling Technology and Processes, November 8, 2007

Tina Nerad <[log in to unmask]>

Thu, 1 Nov 2007 14:59:26 -0500

57 lines

New Thread

IPC Webcast Series: Product Compliance with Environmental Regulations, December 11, 12, & 13, 2007

IPC Webcast Series: Product Compliance with Environmental Regulations, December 11, 12, & 13, 2007

Tina Nerad <[log in to unmask]>

Wed, 7 Nov 2007 09:12:19 -0600

98 lines

New Thread

IPC Workshops being offered in February 2008, in Phoenix, AZ

IPC Workshops being offered in February 2008, in Phoenix, AZ

Tina Nerad <[log in to unmask]>

Thu, 8 Nov 2007 16:04:58 -0600

102 lines

New Thread

IPC workshops being offered in Phoenix, AZ in January 2008

IPC workshops being offered in Phoenix, AZ in January 2008

Tina Nerad <[log in to unmask]>

Fri, 16 Nov 2007 15:35:30 -0600

87 lines

New Thread

IPC Workshops being offered in San Jose, CA - January 2008

IPC Workshops being offered in San Jose, CA - January 2008

Tina Nerad <[log in to unmask]>

Tue, 6 Nov 2007 09:32:41 -0600

100 lines

New Thread

IPC's New Webcasts in January 2008 - Sign Up Today!

IPC's New Webcasts in January 2008 - Sign Up Today!

Michelle Michelotti <[log in to unmask]>

Fri, 9 Nov 2007 15:45:56 -0600

109 lines

New Thread

IPC/JEDEC International Conference on Lead-Free Electronics, December 3-5, 2007, Austin, TX

IPC/JEDEC International Conference on Lead-Free Electronics, December 3-5, 2007, Austin, TX

Tina Nerad <[log in to unmask]>

Wed, 14 Nov 2007 14:17:58 -0600

52 lines

New Thread

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, NV

IPC/JEDEC Seminar: The Challenges of Going Green, January 7, 2008, Las Vegas, NV

Tina Nerad <[log in to unmask]>

Tue, 6 Nov 2007 16:35:04 -0600

59 lines

New Thread

Large Format PCB - Suppliers?

Large Format PCB - Suppliers?

John Parsons <[log in to unmask]>

Tue, 13 Nov 2007 15:37:16 -0800

41 lines

New Thread

Laser drilling limitations

Laser drilling limitations

Sherif Refaat <[log in to unmask]>

Mon, 19 Nov 2007 10:18:17 -0500

29 lines

Re: Laser drilling limitations

Lee parker <[log in to unmask]>

Tue, 20 Nov 2007 11:37:41 -0500

69 lines

Re: Laser drilling limitations

Dwight Mattix <[log in to unmask]>

Tue, 20 Nov 2007 11:10:56 -0800

105 lines

Re: Laser drilling limitations

John Parsons <[log in to unmask]>

Tue, 20 Nov 2007 11:26:42 -0800

140 lines

Re: Laser drilling limitations

Sherif Refaat <[log in to unmask]>

Tue, 20 Nov 2007 14:47:14 -0500

147 lines

Re: Laser drilling limitations

Lee parker <[log in to unmask]>

Tue, 20 Nov 2007 16:32:45 -0500

185 lines

Re: Laser drilling limitations

Simonik, Dave R. (David) <[log in to unmask]>

Wed, 21 Nov 2007 10:25:09 -0500

280 lines

Re: Laser drilling limitations

Kerry McMullen <[log in to unmask]>

Wed, 21 Nov 2007 10:27:39 -0500

275 lines

New Thread

Lead laws threaten electronics

Lead laws threaten electronics

Stephen Pierce <[log in to unmask]>

Fri, 2 Nov 2007 12:25:17 -0700

25 lines

Re: Lead laws threaten electronics

Genny Gibbard <[log in to unmask]>

Fri, 2 Nov 2007 13:59:30 -0600

53 lines

New Thread

Low Noise Coaxial Cable Question

Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Tue, 27 Nov 2007 10:01:57 -0500

29 lines

Re: Low Noise Coaxial Cable Question

Seth Goodman <[log in to unmask]>

Fri, 30 Nov 2007 11:10:43 -0600

43 lines

New Thread

Malcom: 5 RPM; brookfield: 10 RPM readings

Malcom: 5 RPM; brookfield: 10 RPM readings

badri <[log in to unmask]>

Wed, 28 Nov 2007 15:30:11 +0530

49 lines

Re: Malcom: 5 RPM; brookfield: 10 RPM readings

Mike Fenner <[log in to unmask]>

Wed, 28 Nov 2007 10:41:34 -0000

120 lines

New Thread

MIL-P-55110D Amendment3

Re: MIL-P-55110D Amendment3

- bogert <[log in to unmask]>

Fri, 2 Nov 2007 04:39:39 -0500

59 lines

Re: MIL-P-55110D Amendment3

Franklin D Asbell <[log in to unmask]>

Fri, 2 Nov 2007 05:27:56 -0500

85 lines

Re: MIL-P-55110D Amendment3

Yuan-chia Joyce Koo <[log in to unmask]>

Fri, 2 Nov 2007 06:54:36 -0400

123 lines

Re: MIL-P-55110D Amendment3

Franklin D Asbell <[log in to unmask]>

Fri, 2 Nov 2007 06:21:56 -0600

155 lines

Re: MIL-P-55110D Amendment3

mp3 <[log in to unmask]>

Fri, 2 Nov 2007 18:00:38 -0800

58 lines

Re: MIL-P-55110D Amendment3

Ian Hanna <[log in to unmask]>

Fri, 2 Nov 2007 09:33:37 -0400

100 lines

Re: MIL-P-55110D Amendment3

Franklin D Asbell <[log in to unmask]>

Fri, 2 Nov 2007 08:12:16 -0600

137 lines

Re: MIL-P-55110D Amendment3

Ian Hanna <[log in to unmask]>

Fri, 2 Nov 2007 10:52:31 -0400

185 lines

Re: MIL-P-55110D Amendment3

Franklin D Asbell <[log in to unmask]>

Fri, 2 Nov 2007 09:21:09 -0600

221 lines

Re: MIL-P-55110D Amendment3

Ian Hanna <[log in to unmask]>

Fri, 2 Nov 2007 11:41:57 -0400

258 lines

Re: MIL-P-55110D Amendment3

Franklin D Asbell <[log in to unmask]>

Fri, 2 Nov 2007 11:07:36 -0600

305 lines

New Thread

no-clean flux residue on connector pins

no-clean flux residue on connector pins

Phil Nutting <[log in to unmask]>

Thu, 15 Nov 2007 12:50:01 -0500

49 lines

Re: no-clean flux residue on connector pins

Joe Russeau <[log in to unmask]>

Thu, 15 Nov 2007 13:48:50 -0500

109 lines

Re: no-clean flux residue on connector pins

Phil Nutting <[log in to unmask]>

Thu, 15 Nov 2007 14:01:57 -0500

173 lines

Re: no-clean flux residue on connector pins

Gervascio, Thomas <[log in to unmask]>

Thu, 15 Nov 2007 15:00:10 -0500

92 lines

Re: no-clean flux residue on connector pins

Phil Nutting <[log in to unmask]>

Thu, 15 Nov 2007 15:43:44 -0500

107 lines

Re: no-clean flux residue on connector pins

Brian Ellis <[log in to unmask]>

Fri, 16 Nov 2007 09:47:03 +0200

70 lines

Re: no-clean flux residue on connector pins

Mike Fenner <[log in to unmask]>

Tue, 20 Nov 2007 09:59:27 -0000

105 lines

New Thread

non wetting

non wetting

Lon Weffers <[log in to unmask]>

Fri, 9 Nov 2007 16:23:00 +0100

49 lines

Re: non wetting

Liang Yin <[log in to unmask]>

Fri, 9 Nov 2007 16:58:41 +0000

90 lines

Re: non wetting

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Nov 2007 10:01:32 -0600

122 lines

New Thread

NTC - Kind of Friday Today

NTC - Kind of Friday Today

Dave Dixon <[log in to unmask]>

Wed, 21 Nov 2007 16:27:35 -0600

37 lines

New Thread

NTC: Request for posting here.

NTC: Request for posting here.

Brian Ellis <[log in to unmask]>

Thu, 29 Nov 2007 09:49:27 +0200

42 lines

Re: NTC: Request for posting here.

badri <[log in to unmask]>

Thu, 29 Nov 2007 13:30:35 +0530

91 lines

Re: NTC: Request for posting here.

Roland Jaquet <[log in to unmask]>

Thu, 29 Nov 2007 10:10:58 +0100

86 lines

New Thread

NTC: Royal Empathy

Re: NTC: Royal Empathy

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 29 Nov 2007 07:28:26 -0700

72 lines

New Thread

Older Dynascope

Older Dynascope

kwood716 <[log in to unmask]>

Tue, 13 Nov 2007 20:27:34 -0500

40 lines

New Thread

out of office

out of office

John Queen <[log in to unmask]>

Thu, 29 Nov 2007 15:24:52 -0000

40 lines

New Thread

Palladium Silver Surface Finish

Palladium Silver Surface Finish

Kevin Glidden <[log in to unmask]>

Thu, 29 Nov 2007 08:14:57 -0500

43 lines

Re: Palladium Silver Surface Finish

Drew meyer <[log in to unmask]>

Thu, 29 Nov 2007 07:28:38 -0600

48 lines

Re: Palladium Silver Surface Finish

David D. Hillman <[log in to unmask]>

Thu, 29 Nov 2007 08:00:11 -0600

96 lines

Re: Palladium Silver Surface Finish

Guy Ramsey <[log in to unmask]>

Thu, 29 Nov 2007 09:01:19 -0500

70 lines

Re: Palladium Silver Surface Finish

Kevin Glidden <[log in to unmask]>

Thu, 29 Nov 2007 09:25:11 -0500

27 lines

Re: Palladium Silver Surface Finish

P. Langeveld <[log in to unmask]>

Thu, 29 Nov 2007 17:19:33 +0100

72 lines

New Thread

PCA washing

PCA washing

Ioan Tempea <[log in to unmask]>

Mon, 26 Nov 2007 10:45:03 -0500

43 lines

Re: PCA washing

Stadem, Richard D. <[log in to unmask]>

Mon, 26 Nov 2007 10:30:28 -0600

72 lines

Re: PCA washing

[log in to unmask]

Mon, 26 Nov 2007 12:40:20 EST

44 lines

New Thread

PCB Layout Contractor

PCB Layout Contractor

Ali Iranmanesh <[log in to unmask]>

Thu, 1 Nov 2007 11:24:42 -0800

27 lines

New Thread

Plastic PLCC socket rework.

Plastic PLCC socket rework.

Joel Alexander <[log in to unmask]>

Wed, 7 Nov 2007 11:02:13 -0500

32 lines

Re: Plastic PLCC socket rework.

Steve Gregory <[log in to unmask]>

Wed, 7 Nov 2007 10:04:41 -0600

63 lines

Re: Plastic PLCC socket rework.

John Burke <[log in to unmask]>

Wed, 7 Nov 2007 08:37:00 -0800

92 lines

Re: Plastic PLCC socket rework.

Craig Cullum <[log in to unmask]>

Wed, 7 Nov 2007 11:55:03 -0600

56 lines

Re: Plastic PLCC socket rework.

Linda Langley <[log in to unmask]>

Thu, 8 Nov 2007 10:09:07 -0500

78 lines

Re: Plastic PLCC socket rework.

Carl VanWormer <[log in to unmask]>

Thu, 8 Nov 2007 07:32:28 -0800

107 lines

New Thread

Plugged vias procedures.

Plugged vias procedures.

Sherif Refaat <[log in to unmask]>

Mon, 19 Nov 2007 10:35:46 -0500

42 lines

New Thread

Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Victor G. Hernandez <[log in to unmask]>

Wed, 7 Nov 2007 09:04:24 -0600

27 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Kevin Glidden <[log in to unmask]>

Wed, 7 Nov 2007 10:12:15 -0500

61 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 7 Nov 2007 08:14:13 -0700

56 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Werner Engelmaier /* <[log in to unmask]>

Wed, 7 Nov 2007 11:13:10 EST

41 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Paul Reid <[log in to unmask]>

Sat, 17 Nov 2007 10:24:40 -0500

79 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Dwight Mattix <[log in to unmask]>

Sat, 17 Nov 2007 09:36:56 -0800

113 lines

Re: Post Thermal Stress Hole Wall Pull Away Criteria, cross section analysis

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 26 Nov 2007 08:32:29 -0700

159 lines

New Thread

Precautionary principal

Precautionary principal

John Burke <[log in to unmask]>

Thu, 22 Nov 2007 08:39:08 -0800

60 lines

New Thread

Proposed standard for component process classification

Proposed standard for component process classification

Jack Crawford <[log in to unmask]>

Tue, 6 Nov 2007 22:38:25 -0600

81 lines

New Thread

Randall L Bock/MSD/US/PBI is out of the office.

Randall L Bock/MSD/US/PBI is out of the office.

Randy Bock Sr. <[log in to unmask]>

Mon, 12 Nov 2007 11:56:29 -0500

25 lines

New Thread

Request for posting on your TechNet wall

Re: Request for posting on your TechNet wall

Steve Gregory <[log in to unmask]>

Thu, 8 Nov 2007 07:26:17 -0600

79 lines

Re: Request for posting on your TechNet wall

Ioan Tempea <[log in to unmask]>

Thu, 8 Nov 2007 09:50:23 -0500

113 lines

Re: Request for posting on your TechNet wall

Miguel Vallejo <[log in to unmask]>

Thu, 8 Nov 2007 08:12:02 -0800

110 lines

Re: Request for posting on your TechNet wall

badri <[log in to unmask]>

Fri, 9 Nov 2007 09:59:13 +0530

157 lines

Re: Request for posting on your TechNet wall

Ivanoe Pedruzzi <[log in to unmask]>

Fri, 9 Nov 2007 06:36:13 -0000

33 lines

Re: Request for posting on your TechNet wall

Wood Kenneth <[log in to unmask]>

Fri, 9 Nov 2007 09:36:10 -0500

86 lines

New Thread

Rohs process on non-rohs assembly

Rohs process on non-rohs assembly

Peter L <[log in to unmask]>

Sun, 4 Nov 2007 23:45:59 -0600

39 lines

New Thread

RTV contamination and conformal coating

RTV contamination and conformal coating

Ioan Tempea <[log in to unmask]>

Thu, 22 Nov 2007 14:31:22 -0500

54 lines

Re: RTV contamination and conformal coating

Phillip Bavaro <[log in to unmask]>

Fri, 23 Nov 2007 08:50:19 -0800

105 lines

Re: RTV contamination and conformal coating

Honsowetz, Eric <[log in to unmask]>

Thu, 29 Nov 2007 15:47:38 -0500

171 lines

New Thread

Seeking Speakers for Flex Conference in 2008

Seeking Speakers for Flex Conference in 2008

Tina Nerad <[log in to unmask]>

Thu, 8 Nov 2007 13:51:42 -0600

62 lines

New Thread

Silicone Lens Cleaner Problem

Silicone Lens Cleaner Problem

Blair Hogg <[log in to unmask]>

Mon, 12 Nov 2007 10:14:02 -0600

34 lines

Re: Silicone Lens Cleaner Problem

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 12 Nov 2007 09:31:32 -0700

61 lines

Re: Silicone Lens Cleaner Problem

John Burke <[log in to unmask]>

Mon, 12 Nov 2007 08:38:19 -0800

65 lines

Re: Silicone Lens Cleaner Problem

Brian Ellis <[log in to unmask]>

Mon, 12 Nov 2007 18:49:11 +0200

82 lines

Re: Silicone Lens Cleaner Problem

Eric CHRISTISON <[log in to unmask]>

Mon, 12 Nov 2007 17:12:18 +0000

94 lines

Re: Silicone Lens Cleaner Problem

Blair Hogg <[log in to unmask]>

Mon, 12 Nov 2007 11:09:48 -0600

70 lines

Re: Silicone Lens Cleaner Problem

Creswick, Steven <[log in to unmask]>

Mon, 12 Nov 2007 12:26:27 -0500

89 lines

Re: Silicone Lens Cleaner Problem

Blomberg, Rainer (FL51) <[log in to unmask]>

Mon, 12 Nov 2007 12:28:29 -0500

106 lines

Re: Silicone Lens Cleaner Problem

Guy Ramsey <[log in to unmask]>

Mon, 12 Nov 2007 13:52:51 -0500

120 lines

Re: Silicone Lens Cleaner Problem

Rex Waygood <[log in to unmask]>

Tue, 13 Nov 2007 13:30:11 -0000

105 lines

Re: Silicone Lens Cleaner Problem

Hernefjord Ingemar <[log in to unmask]>

Wed, 21 Nov 2007 15:20:17 +0100

90 lines

Re: Silicone Lens Cleaner Problem

Peter Swanson <[log in to unmask]>

Wed, 21 Nov 2007 14:26:56 -0000

129 lines

Re: Silicone Lens Cleaner Problem

Creswick, Steven <[log in to unmask]>

Wed, 21 Nov 2007 12:26:47 -0500

180 lines

Re: Silicone Lens Cleaner Problem

Hernefjord Ingemar <[log in to unmask]>

Thu, 22 Nov 2007 10:52:11 +0100

156 lines

New Thread

SMT placement equipment capability studies

SMT placement equipment capability studies

Joel Alexander <[log in to unmask]>

Tue, 20 Nov 2007 16:26:12 -0500

34 lines

Re: SMT placement equipment capability studies

John Queen <[log in to unmask]>

Tue, 20 Nov 2007 21:39:41 -0000

107 lines

Re: SMT placement equipment capability studies

Joel Alexander <[log in to unmask]>

Tue, 20 Nov 2007 16:52:34 -0500

78 lines

Re: SMT placement equipment capability studies

Douglas McCall <[log in to unmask]>

Fri, 23 Nov 2007 16:13:59 +0000

51 lines

New Thread

SN100C process

SN100C process

Ioan Tempea <[log in to unmask]>

Wed, 28 Nov 2007 10:55:21 -0500

63 lines

Re: SN100C process

Rex Waygood <[log in to unmask]>

Wed, 28 Nov 2007 16:17:53 -0000

125 lines

Re: SN100C process

Mike Fenner <[log in to unmask]>

Thu, 29 Nov 2007 14:47:28 -0000

135 lines

Re: SN100C process

Ioan Tempea <[log in to unmask]>

Thu, 29 Nov 2007 10:18:43 -0500

179 lines

Re: SN100C process

Rex Waygood <[log in to unmask]>

Thu, 29 Nov 2007 15:28:08 -0000

234 lines

Re: SN100C process

Rex Waygood <[log in to unmask]>

Thu, 29 Nov 2007 15:28:57 -0000

230 lines

Re: SN100C process

Ioan Tempea <[log in to unmask]>

Thu, 29 Nov 2007 10:41:57 -0500

60 lines

Re: SN100C process

John Queen <[log in to unmask]>

Thu, 29 Nov 2007 15:52:00 -0000

78 lines

Re: SN100C process

P. Langeveld <[log in to unmask]>

Thu, 29 Nov 2007 17:07:00 +0100

117 lines

Re: SN100C process

Rex Waygood <[log in to unmask]>

Thu, 29 Nov 2007 16:18:10 -0000

178 lines

Re: SN100C process

John Queen <[log in to unmask]>

Thu, 29 Nov 2007 16:18:09 -0000

79 lines

Re: SN100C process

Mike Fenner <[log in to unmask]>

Thu, 29 Nov 2007 22:25:30 -0000

218 lines

Re: SN100C process

John Burke <[log in to unmask]>

Thu, 29 Nov 2007 14:37:32 -0800

299 lines

Re: SN100C process

P. Langeveld <[log in to unmask]>

Fri, 30 Nov 2007 08:43:00 +0100

87 lines

New Thread

SN100C process NTC

Re: SN100C process NTC

Mike Fenner <[log in to unmask]>

Fri, 30 Nov 2007 16:59:29 -0000

297 lines

New Thread

Soldering temp-time

Soldering temp-time

Luan Nguyen <[log in to unmask]>

Thu, 1 Nov 2007 13:14:02 +0700

41 lines

New Thread

Specifications for the Epoxy in Glass/Epoxy Boards

Specifications for the Epoxy in Glass/Epoxy Boards

Honsowetz, Eric <[log in to unmask]>

Thu, 8 Nov 2007 11:41:33 -0500

44 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Franklin D Asbell <[log in to unmask]>

Thu, 8 Nov 2007 11:10:22 -0600

73 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Werner Engelmaier /* <[log in to unmask]>

Thu, 8 Nov 2007 14:19:49 EST

34 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Honsowetz, Eric <[log in to unmask]>

Thu, 8 Nov 2007 14:40:28 -0500

90 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Werner Engelmaier /* <[log in to unmask]>

Thu, 8 Nov 2007 15:18:59 EST

43 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 8 Nov 2007 13:36:36 -0700

138 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Ian Hanna <[log in to unmask]>

Thu, 8 Nov 2007 15:40:54 -0500

119 lines

Re: Specifications for the Epoxy in Glass/Epoxy Boards

Honsowetz, Eric <[log in to unmask]>

Thu, 8 Nov 2007 15:58:14 -0500

85 lines

New Thread

Supplier for Leads...

Supplier for Leads...

Steve Gregory <[log in to unmask]>

Mon, 12 Nov 2007 13:48:04 -0600

48 lines

Re: Supplier for Leads...

Phil Nutting <[log in to unmask]>

Mon, 12 Nov 2007 14:58:42 -0500

81 lines

Re: Supplier for Leads...

Thayer, Wayne <[log in to unmask]>

Mon, 12 Nov 2007 18:13:33 -0500

76 lines

New Thread

SV: [TN] Check this out

SV: [TN] Check this out

Hfjord <[log in to unmask]>

Mon, 5 Nov 2007 19:46:54 +0100

136 lines

New Thread

SV: [TN] Conformal Coating Breakdown and Iraqi dust

SV: [TN] Conformal Coating Breakdown and Iraqi dust

Hfjord <[log in to unmask]>

Tue, 27 Nov 2007 15:53:14 +0100

140 lines

New Thread

SV: [TN] Low Noise Coaxial Cable Question

SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Tue, 27 Nov 2007 23:21:54 +0100

91 lines

Re: SV: [TN] Low Noise Coaxial Cable Question

Brian Ellis <[log in to unmask]>

Wed, 28 Nov 2007 11:29:08 +0200

130 lines

Re: SV: [TN] Low Noise Coaxial Cable Question

Hernefjord Ingemar <[log in to unmask]>

Wed, 28 Nov 2007 13:27:22 +0100

147 lines

Re: SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Wed, 28 Nov 2007 08:50:47 -0500

202 lines

Re: SV: [TN] Low Noise Coaxial Cable Question

Seth Goodman <[log in to unmask]>

Fri, 30 Nov 2007 11:54:57 -0600

51 lines

New Thread

SV: [TN] NTC: Royal Empathy

SV: [TN] NTC: Royal Empathy

Hfjord <[log in to unmask]>

Thu, 29 Nov 2007 17:30:10 +0100

99 lines

Re: SV: [TN] NTC: Royal Empathy

Stadem, Richard D. <[log in to unmask]>

Thu, 29 Nov 2007 11:02:23 -0600

117 lines

New Thread

SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Thu, 29 Nov 2007 00:19:39 +0100

276 lines

SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Fri, 30 Nov 2007 19:27:18 +0100

88 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Douglas O. Pauls <[log in to unmask]>

Fri, 30 Nov 2007 13:08:52 -0600

156 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Fri, 30 Nov 2007 14:22:06 -0500

151 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Douglas O. Pauls <[log in to unmask]>

Fri, 30 Nov 2007 13:28:05 -0600

199 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Fri, 30 Nov 2007 14:40:58 -0500

244 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

David Greig <[log in to unmask]>

Fri, 30 Nov 2007 20:22:01 -0000

296 lines

Re: SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Joe Russeau <[log in to unmask]>

Fri, 30 Nov 2007 15:19:30 -0500

304 lines

New Thread

SV: [TN] SV: [TN] NTC: Royal Empathy

SV: [TN] SV: [TN] NTC: Royal Empathy

Hfjord <[log in to unmask]>

Thu, 29 Nov 2007 19:32:26 +0100

142 lines

New Thread

SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

SV: [TN] SV: [TN] SV: [TN] Low Noise Coaxial Cable Question

Hfjord <[log in to unmask]>

Fri, 30 Nov 2007 22:19:01 +0100

293 lines

New Thread

SV: [TN] [NTC] Dewey and Graham

SV: [TN] [NTC] Dewey and Graham

Hfjord <[log in to unmask]>

Tue, 6 Nov 2007 17:51:24 +0100

132 lines

Re: SV: [TN] [NTC] Dewey and Graham

Graham Naisbitt <[log in to unmask]>

Tue, 6 Nov 2007 18:31:48 +0000

233 lines

Re: SV: [TN] [NTC] Dewey and Graham

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 6 Nov 2007 11:50:07 -0700

79 lines

New Thread

Tabletop AOI

Tabletop AOI

Ioan Tempea <[log in to unmask]>

Mon, 19 Nov 2007 09:51:17 -0500

40 lines

Re: Tabletop AOI

Steve Gregory <[log in to unmask]>

Mon, 19 Nov 2007 10:59:22 -0600

80 lines

Re: Tabletop AOI

Roland Jaquet <[log in to unmask]>

Mon, 19 Nov 2007 18:17:22 +0100

84 lines

Re: Tabletop AOI

Ioan Tempea <[log in to unmask]>

Mon, 19 Nov 2007 13:14:00 -0500

97 lines

Re: Tabletop AOI

Gumpert, Ben <[log in to unmask]>

Mon, 19 Nov 2007 14:44:38 -0500

74 lines

New Thread

TH pin clipping and class 3

TH pin clipping and class 3

Ioan Tempea <[log in to unmask]>

Tue, 13 Nov 2007 08:49:28 -0500

48 lines

Re: TH pin clipping and class 3

Gary Camac <[log in to unmask]>

Tue, 13 Nov 2007 07:59:20 -0600

79 lines

New Thread

Thermal Pads Dimension versus size / Copper Thickness

Thermal Pads Dimension versus size / Copper Thickness

Roland Jaquet <[log in to unmask]>

Wed, 28 Nov 2007 15:05:06 +0100

46 lines

Re: Thermal Pads Dimension versus size / Copper Thickness

Phil Nutting <[log in to unmask]>

Wed, 28 Nov 2007 10:44:08 -0500

85 lines

Re: Thermal Pads Dimension versus size / Copper Thickness

McGlaughlin, Jeffrey A <[log in to unmask]>

Wed, 28 Nov 2007 13:35:34 -0500

89 lines

Re: Thermal Pads Dimension versus size / Copper Thickness

[log in to unmask]

Thu, 29 Nov 2007 19:43:23 EST

52 lines

New Thread

Tin/Lead plating board, turned tarnish

Re: Tin/Lead plating board, turned tarnish

Kong Hui Poh <[log in to unmask]>

Fri, 30 Nov 2007 13:25:15 +0800

47 lines

Re: Tin/Lead plating board, turned tarnish

Thayer, Wayne <[log in to unmask]>

Fri, 30 Nov 2007 07:35:03 -0500

78 lines

New Thread

Turkey Operations

Re: Turkey Operations

John Burke <[log in to unmask]>

Thu, 15 Nov 2007 13:36:30 -0800

161 lines

New Thread

un-subscribe

un-subscribe

Tom P <[log in to unmask]>

Thu, 8 Nov 2007 09:44:08 -0500

19 lines

New Thread

UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office.

UPDATE TO PREVIOUS MESSAGE Joel Alexander is out of the office.

Joel Alexander <[log in to unmask]>

Mon, 12 Nov 2007 16:01:21 -0500

24 lines

New Thread

Use of Lubricants for SDRAM Memory Sticks/Sockets

Use of Lubricants for SDRAM Memory Sticks/Sockets

Croslin, Robert <[log in to unmask]>

Fri, 16 Nov 2007 09:59:34 -0500

47 lines

Re: Use of Lubricants for SDRAM Memory Sticks/Sockets

Brian Ellis <[log in to unmask]>

Fri, 16 Nov 2007 17:11:03 +0200

77 lines

Re: Use of Lubricants for SDRAM Memory Sticks/Sockets

[log in to unmask]

Fri, 16 Nov 2007 13:08:39 EST

44 lines

New Thread

Vacuum Baking of MSDs

Vacuum Baking of MSDs

Gumpert, Ben <[log in to unmask]>

Tue, 20 Nov 2007 13:26:47 -0500

32 lines

Re: Vacuum Baking of MSDs

Louis Hart <[log in to unmask]>

Tue, 20 Nov 2007 14:26:39 -0500

87 lines

Re: Vacuum Baking of MSDs

John Burke <[log in to unmask]>

Tue, 20 Nov 2007 11:52:14 -0800

68 lines

Re: Vacuum Baking of MSDs

Reuven Rokah <[log in to unmask]>

Tue, 20 Nov 2007 22:25:40 +0200

113 lines

Re: Vacuum Baking of MSDs

Stadem, Richard D. <[log in to unmask]>

Tue, 20 Nov 2007 14:27:44 -0600

113 lines

Re: Vacuum Baking of MSDs

Thayer, Wayne <[log in to unmask]>

Tue, 20 Nov 2007 16:19:16 -0500

151 lines

Re: Vacuum Baking of MSDs

Stadem, Richard D. <[log in to unmask]>

Tue, 20 Nov 2007 15:58:50 -0600

183 lines

Re: Vacuum Baking of MSDs

David D. Hillman <[log in to unmask]>

Mon, 26 Nov 2007 08:27:54 -0600

232 lines

Re: Vacuum Baking of MSDs

Stadem, Richard D. <[log in to unmask]>

Mon, 26 Nov 2007 10:14:22 -0600

288 lines

Re: Vacuum Baking of MSDs

Phillip Bavaro <[log in to unmask]>

Thu, 22 Nov 2007 06:59:28 -0800

215 lines

New Thread

verifying BGA underfill coverage

Re: verifying BGA underfill coverage

Creswick, Steven <[log in to unmask]>

Thu, 1 Nov 2007 06:07:49 -0400

107 lines

Re: verifying BGA underfill coverage

Gervascio, Thomas <[log in to unmask]>

Thu, 1 Nov 2007 07:48:50 -0400

82 lines

Re: verifying BGA underfill coverage

Daniel Blass <[log in to unmask]>

Thu, 1 Nov 2007 08:44:03 -0500

54 lines

Re: verifying BGA underfill coverage

Creswick, Steven <[log in to unmask]>

Thu, 1 Nov 2007 10:14:48 -0400

85 lines

Re: verifying BGA underfill coverage

[log in to unmask]

Thu, 1 Nov 2007 11:51:54 EDT

32 lines

Re: verifying BGA underfill coverage

David D. Hillman <[log in to unmask]>

Thu, 1 Nov 2007 18:06:14 -0500

158 lines

Re: verifying BGA underfill coverage

Gervascio, Thomas <[log in to unmask]>

Fri, 2 Nov 2007 08:14:44 -0400

202 lines

Re: verifying BGA underfill coverage

Igoshev, Vladimir <[log in to unmask]>

Fri, 2 Nov 2007 09:31:53 -0400

234 lines

Re: verifying BGA underfill coverage

Creswick, Steven <[log in to unmask]>

Fri, 2 Nov 2007 09:42:14 -0400

281 lines

Re: verifying BGA underfill coverage

Igoshev, Vladimir <[log in to unmask]>

Fri, 2 Nov 2007 09:46:49 -0400

294 lines

Re: verifying BGA underfill coverage

Gervascio, Thomas <[log in to unmask]>

Fri, 2 Nov 2007 09:49:46 -0400

80 lines

Re: verifying BGA underfill coverage

David D. Hillman <[log in to unmask]>

Fri, 2 Nov 2007 12:21:49 -0500

128 lines

Re: verifying BGA underfill coverage

Phillip Bavaro <[log in to unmask]>

Sun, 4 Nov 2007 16:51:12 +0800

177 lines

New Thread

Wave solder flux volume measurements

Wave solder flux volume measurements

Joel Alexander <[log in to unmask]>

Fri, 30 Nov 2007 16:24:31 -0500

39 lines

Re: Wave solder flux volume measurements

Richard Kraszewski <[log in to unmask]>

Fri, 30 Nov 2007 16:46:22 -0500

88 lines

Re: Wave solder flux volume measurements

Guy Ramsey <[log in to unmask]>

Fri, 30 Nov 2007 18:47:20 -0500

65 lines

New Thread

World class DPMO

Re: World class DPMO

Eric Castonguay <[log in to unmask]>

Thu, 1 Nov 2007 04:54:06 -0700

92 lines

Re: World class DPMO

[log in to unmask]

Thu, 1 Nov 2007 11:47:51 EDT

48 lines

New Thread

[LF] [TN] Vacuum Baking of MSDs

Re: [LF] [TN] Vacuum Baking of MSDs

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Nov 2007 11:35:48 -0600

99 lines

Re: [LF] [TN] Vacuum Baking of MSDs

Ian Hanna <[log in to unmask]>

Tue, 27 Nov 2007 12:58:47 -0500

122 lines

New Thread

[NTC] Dewey and Graham

Re: [NTC] Dewey and Graham

Graham Naisbitt <[log in to unmask]>

Tue, 6 Nov 2007 11:50:56 +0000

80 lines

Re: [NTC] Dewey and Graham

Joe Russeau <[log in to unmask]>

Tue, 6 Nov 2007 12:52:03 -0500

111 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager