LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

April 2007

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Show Table of Contents

Subject	From	Date
<No subject>	<>	Thu, 19 Apr 2007 10:36:42 -0400
Blue Solder Resist	<>	Wed, 18 Apr 2007 14:38:05 -0400
Re: Blue Solder Resist	<>	Thu, 19 Apr 2007 08:54:13 -0400
Re: bubbles in conformal coating	<>	Mon, 30 Apr 2007 22:14:39 EDT
Re: Ionic Testing termination (Rose Testing)	<>	Wed, 25 Apr 2007 23:27:49 EDT
Re: SV: [TN] BGA Weights	<>	Fri, 27 Apr 2007 09:53:16 +0000
via in pad	<>	Fri, 13 Apr 2007 14:26:13 -0700
Question on "semi additive" process	Adam Seychell	Mon, 30 Apr 2007 18:08:34 +1000
stainless compatibility in alkaline etchant	Adam Seychell	Mon, 16 Apr 2007 17:52:38 +1000
Re: stainless compatibility in alkaline etchant	Adam Seychell	Tue, 17 Apr 2007 07:31:18 +1000
Re: RoHS/WEEE Directives - Your Opportunity to be Heard	Ahne Oosterhof	Mon, 30 Apr 2007 14:43:44 -0700
pad lifting	al shirazi	Tue, 10 Apr 2007 09:56:28 -0700
Re: Inspection Under BGA's	Alan Kreplick	Fri, 6 Apr 2007 15:54:29 -0400
Re: Harmonizing Code For a custom functional tester	Alcorn, Brent	Wed, 18 Apr 2007 14:53:52 -0400
lead free SnCu and SAC305	Ali Koca	Mon, 9 Apr 2007 15:58:45 +0300
IPC-M-675	Alistair Murray	Wed, 18 Apr 2007 12:54:50 +0100
Re: NTC Tombstoning MELF	Anslow, Phillip	Tue, 3 Apr 2007 08:23:51 +0100
Re: Conformal Coat Dewetting	BADRI	Sat, 7 Apr 2007 09:03:48 +0530
Re: Conformal Coating Voids	BADRI	Tue, 24 Apr 2007 18:45:21 +0530
Re: NiPdAu FINISH	BADRI	Thu, 5 Apr 2007 09:02:43 +0530
Re: Thermal via's on D2PAK	Barbara Burcham	Thu, 5 Apr 2007 11:03:49 -0500
Re: Blue Solder Resist	Barmuta, Michael	Wed, 18 Apr 2007 14:50:47 -0700
Re: Cool Caps	Barmuta, Michael	Tue, 24 Apr 2007 09:32:00 -0700
Re: Water stream	Barmuta, Michael	Wed, 4 Apr 2007 15:28:29 -0700
Re: Water-break Test	Barmuta, Michael	Mon, 9 Apr 2007 13:32:29 -0700
Re: Harmonizing Code For a custom functional tester	Bernard Kessler	Wed, 18 Apr 2007 12:04:31 -0700
Conformal coating and radiation	Betty Magnin	Wed, 25 Apr 2007 17:59:37 +0200
Re: Conformal coating and radiation	Betty Magnin	Thu, 26 Apr 2007 14:03:49 +0200
Re: BGA Weights	Bev Christian	Wed, 25 Apr 2007 16:58:02 -0400
Re: BGA Weights	Bev Christian	Thu, 26 Apr 2007 08:41:43 -0400
Re: BGA Weights	Bev Christian	Thu, 26 Apr 2007 12:01:21 -0400
Re: Lead-Free AVX Caps	Bev Christian	Fri, 27 Apr 2007 08:03:29 -0400
Re: NTC Carbon Footprint term definition	Bev Christian	Sun, 29 Apr 2007 19:33:04 -0400
Re: Reference info needed	Bev Christian	Wed, 4 Apr 2007 16:12:34 -0400
Re: Reference info needed	Bev Christian	Wed, 4 Apr 2007 16:28:17 -0400
Re: solderability testing	Bev Christian	Mon, 23 Apr 2007 13:06:56 -0400
Re: solderability testing	Bev Christian	Wed, 25 Apr 2007 08:17:32 -0400
Re: SV: [TN] BGA Weights	Bev Christian	Thu, 26 Apr 2007 17:19:44 -0400
Re: BGA Weights	Bill Kunkle	Thu, 26 Apr 2007 10:37:12 -0400
Re: Tombstoning MELF	Black, Paul	Mon, 2 Apr 2007 11:13:22 -0400
Conformal Coat Dewetting	Bloomquist, Ken	Fri, 6 Apr 2007 07:29:16 -0700
Re: Conformal Coat Dewetting	Bloomquist, Ken	Mon, 9 Apr 2007 06:36:13 -0700
Re: Conformal Coating Voids	Bloomquist, Ken	Tue, 24 Apr 2007 06:24:25 -0700
Metalized Poly Caps	Bloomquist, Ken	Thu, 26 Apr 2007 14:40:31 -0700
Re: Metalized Poly Caps	Bloomquist, Ken	Thu, 26 Apr 2007 14:50:40 -0700
Re: Metalized Poly Caps	Bloomquist, Ken	Fri, 27 Apr 2007 08:28:50 -0700
Re: NTC An alternate view on lead in solders	Bloomquist, Ken	Fri, 20 Apr 2007 06:03:17 -0700
Re: SV: [TN] Placement of large flatpacks and BGAs close to board edge	Bloomquist, Ken	Mon, 16 Apr 2007 10:19:10 -0700
Thermal via's on D2PAK	Bloomquist, Ken	Thu, 5 Apr 2007 08:43:07 -0700
Re: Thermal via's on D2PAK	Bloomquist, Ken	Thu, 5 Apr 2007 14:11:20 -0700
Re: Thermal via's on D2PAK	Bloomquist, Ken	Thu, 5 Apr 2007 14:54:16 -0700
encapsulation criteria	Bob Arciolla	Fri, 6 Apr 2007 11:45:23 -0500
Fw: encapsulation criteria	Bob Arciolla	Mon, 9 Apr 2007 14:29:33 -0500
unsubscribe	bob wettermann	Wed, 11 Apr 2007 15:05:34 -0700
Re: Space for marking board assembly	Bob Wilson	Thu, 26 Apr 2007 14:02:40 -0700
Re: Cleaning rosin flux with DI water..	Brian Ellis	Mon, 9 Apr 2007 17:04:30 +0300
Re: Conformal Coat Dewetting	Brian Ellis	Fri, 6 Apr 2007 18:34:47 +0300
Re: Conformal Coating Voids	Brian Ellis	Tue, 24 Apr 2007 14:06:21 +0300
Re: Fongus treatment	Brian Ellis	Tue, 10 Apr 2007 12:57:55 +0300
Re: Fongus treatment	Brian Ellis	Tue, 10 Apr 2007 15:36:37 +0300
Re: Question on "semi additive" process	Brian Ellis	Mon, 30 Apr 2007 11:22:56 +0300
Re: stainless compatibility in alkaline etchant	Brian Ellis	Mon, 16 Apr 2007 10:58:26 +0300
Re: SV: [TN] SV: [TN] Off the wall question...	Brian Ellis	Thu, 19 Apr 2007 13:51:45 +0300
Re: Water-break Test	Brian Ellis	Tue, 10 Apr 2007 09:40:19 +0300
Re: test - ignore	Brooks,Bill	Mon, 30 Apr 2007 16:39:04 -0700
Via hole plating corner crack	C J Long	Tue, 10 Apr 2007 22:19:55 +0800
Re: Cool Caps	Charlie Pitarys	Tue, 24 Apr 2007 11:26:23 -0500
Re: Water stream	Charlie Pitarys	Thu, 5 Apr 2007 11:01:56 -0500
Re: Water-break Test	Charlie Pitarys	Mon, 9 Apr 2007 15:09:25 -0500
Re: Panellization query -- need urgent inputs	Chris Ball	Wed, 18 Apr 2007 07:51:25 -0400
Re: Panellization query -- need urgent inputs	Chris Ball	Wed, 18 Apr 2007 08:20:03 -0400
Lead Free Shrinkage	Christopher Nash	Mon, 23 Apr 2007 14:38:40 -0400
Re: IPC-M-675	Clayton @ Reliability Resources	Mon, 23 Apr 2007 16:24:52 -0700
Resin fill	Colin McVean	Mon, 16 Apr 2007 12:28:56 +0100
Re: Semi rigid coax cable	Craig Sullivan	Thu, 5 Apr 2007 15:14:42 -0400
Re: SV: [TN] SV: [TN] Cofired gold	Creswick, Steven	Mon, 2 Apr 2007 06:40:52 -0400
Re: Water stream	Creswick, Steven	Thu, 5 Apr 2007 05:48:12 -0400
Re: Water stream - NTC	Creswick, Steven	Thu, 5 Apr 2007 10:12:48 -0400
Re: NTC An alternate view on lead in solders	Dale Ritzen	Fri, 20 Apr 2007 09:25:20 -0500
Re: via in pad	Dave Seymour	Fri, 13 Apr 2007 17:39:21 -0400
Re: IPC Document Dealing with WaveSoldering Trouble Shooting	David Bergman	Tue, 3 Apr 2007 07:54:26 -0500
Re: IPC-M-675	David Bergman	Wed, 18 Apr 2007 19:48:42 -0500
Re: IPC-M-675	David Bergman	Mon, 23 Apr 2007 21:32:43 -0500
Re: BGA Head In Pillow	David D. Hillman	Fri, 20 Apr 2007 17:31:08 -0500
Re: bubbles in conformal coating	David D. Hillman	Mon, 30 Apr 2007 08:00:52 -0500
Re: Conformal Coat Dewetting	David D. Hillman	Fri, 6 Apr 2007 10:54:58 -0500
Re: Fragility of Pb-free Solder Joints	David D. Hillman	Fri, 20 Apr 2007 18:14:43 -0500
Re: Metalized Poly Caps	David D. Hillman	Fri, 27 Apr 2007 15:09:42 -0500
Re: NiPdAu FINISH	David D. Hillman	Wed, 4 Apr 2007 16:55:59 -0500
Re: solderability and soldering-ability	David D. Hillman	Fri, 27 Apr 2007 09:14:45 -0500
Re: Water stream - NTC	David D. Hillman	Thu, 5 Apr 2007 07:06:37 -0500
"plated shut vias"	David Greig	Thu, 26 Apr 2007 16:39:26 +0100
Re: "plated shut vias"	David Greig	Thu, 26 Apr 2007 18:33:17 +0100
Re: Lead-Free AVX Caps	David Greig	Fri, 27 Apr 2007 15:13:09 +0100
Re: Metalized Poly Caps	David Greig	Fri, 27 Apr 2007 16:55:21 +0100
Re: NTC An alternate view on lead in solders	David Hudson	Fri, 20 Apr 2007 10:26:43 +0100
Re: BGA Head In Pillow	David Tremmel	Fri, 20 Apr 2007 13:13:01 -0500
Tacking corners of BGAs	David Tremmel	Mon, 16 Apr 2007 16:55:47 -0500
Re: Tacking corners of BGAs	David Tremmel	Tue, 17 Apr 2007 08:23:15 -0500
Re: Tacking corners of BGAs	David Tremmel	Tue, 17 Apr 2007 11:57:07 -0500
Re: Question on "semi additive" process	DDFRITZ	Mon, 30 Apr 2007 09:14:23 -0400
Re: "plated shut vias"	Dehoyos, Ramon	Fri, 27 Apr 2007 14:31:31 -0400
Re: "plated shut vias"	Dehoyos, Ramon	Mon, 30 Apr 2007 12:34:56 -0400
Re: BGA Weights	Dehoyos, Ramon	Thu, 26 Apr 2007 10:54:35 -0400
Re: BGA Weights	Dehoyos, Ramon	Thu, 26 Apr 2007 11:12:13 -0400
Re: bubbles in conformal coating	Dehoyos, Ramon	Mon, 30 Apr 2007 09:05:59 -0400
Re: Conformal Coating Voids	Dehoyos, Ramon	Tue, 24 Apr 2007 08:52:48 -0400
DIP Stick Carriers	Dehoyos, Ramon	Fri, 20 Apr 2007 12:06:46 -0400
Re: IPC 6012 : Outgassing Criteria	Dehoyos, Ramon	Mon, 2 Apr 2007 16:22:48 -0400
Re: NiPdAu FINISH	Dehoyos, Ramon	Thu, 5 Apr 2007 10:34:31 -0400
Re: NTC An alternate view on lead in solders	Dehoyos, Ramon	Fri, 20 Apr 2007 08:00:50 -0400
Re: NTC An alternate view on lead in solders	Dehoyos, Ramon	Fri, 20 Apr 2007 15:02:32 -0400
PWB Supplier	Dehoyos, Ramon	Fri, 6 Apr 2007 10:02:58 -0400
Recall: [TN] solderability testing	Dehoyos, Ramon	Wed, 25 Apr 2007 08:15:46 -0400
Re: solderability testing	Dehoyos, Ramon	Wed, 25 Apr 2007 08:10:26 -0400
Re: SV: [TN] Placement of large flatpacks and BGAs close to board edge	Dehoyos, Ramon	Mon, 16 Apr 2007 13:33:30 -0400
Re: SV: [TN] Quadpack solder joint failures	Dehoyos, Ramon	Wed, 25 Apr 2007 16:24:04 -0400
Re: Tacking corners of BGAs	Dehoyos, Ramon	Tue, 17 Apr 2007 08:22:39 -0400
Terminals	Dehoyos, Ramon	Mon, 16 Apr 2007 14:22:11 -0400
Re: Via hole plating corner crack	Dehoyos, Ramon	Thu, 12 Apr 2007 08:34:28 -0400
Re: NTC An alternate view on lead in solders	Dennis Fritz	Fri, 20 Apr 2007 10:04:26 EDT
Re: Tombstoning MELF (NTC)	Dennis Fritz	Mon, 2 Apr 2007 12:37:12 EDT
Re: Friday opinion poll	Donald Kyle	Fri, 13 Apr 2007 09:59:34 -0500
Re: bubbles in conformal coating	Douglas O. Pauls	Wed, 25 Apr 2007 10:51:27 -0500
Re: bubbles in conformal coating	Douglas O. Pauls	Mon, 30 Apr 2007 08:51:47 -0500
Re: Conformal coating and radiation	Douglas O. Pauls	Wed, 25 Apr 2007 11:25:05 -0500
Re: Fongus treatment	Douglas O. Pauls	Tue, 10 Apr 2007 06:53:11 -0500
Re: NiPdAu FINISH	Douglas O. Pauls	Thu, 5 Apr 2007 06:45:17 -0500
Water stream	Douglas O. Pauls	Wed, 4 Apr 2007 16:14:47 -0500
Re: Water stream	Douglas O. Pauls	Thu, 5 Apr 2007 06:42:01 -0500
Re: Water stream	Douglas O. Pauls	Thu, 5 Apr 2007 06:52:19 -0500
Re: [LF] RoHS/WEEE Directives - Your Opportunity to be Heard	Douglas O. Pauls	Mon, 30 Apr 2007 16:19:47 -0500
Re: "plated shut vias"	Dwight Mattix	Thu, 26 Apr 2007 10:10:54 -0700
Re: "plated shut vias"	Dwight Mattix	Thu, 26 Apr 2007 14:24:13 -0700
Re: "plated shut vias"	Dwight Mattix	Thu, 26 Apr 2007 15:26:33 -0700
Re: SV: [TN] NTC An alternate view on lead in solders	Dwight Mattix	Fri, 20 Apr 2007 09:11:13 -0700
Re: Thermal via's on D2PAK	Dwight Mattix	Thu, 5 Apr 2007 14:28:41 -0700
bubbles in conformal coating	Edward Mines	Wed, 25 Apr 2007 07:26:51 -0700
conformal coating dewetting	Edward Mines	Mon, 9 Apr 2007 08:46:55 -0700
fungus protection	Edward Mines	Wed, 11 Apr 2007 07:49:32 -0700
Re: Semi rigid coax cable	ekalgren	Thu, 5 Apr 2007 15:28:04 -0400
Solder Paste Inspection machine	Eric Castonguay	Mon, 9 Apr 2007 07:25:04 -0700
Re: "plated shut vias"	Frank Kimmey	Fri, 27 Apr 2007 11:59:57 -0700
Re: Thermal via's on D2PAK	Frank Kimmey	Thu, 5 Apr 2007 08:51:25 -0700
Re: Water-break Test	Frederick Miller	Mon, 9 Apr 2007 14:40:09 -0500
Re: Water-break Test	Frederick Miller	Mon, 9 Apr 2007 14:51:45 -0500
Re: SN100C vs. SAC305	Gary Camac	Mon, 30 Apr 2007 14:03:07 -0500
Re: Ionic Testing termination (Rose Testing)	Gary Ferrari	Tue, 3 Apr 2007 21:00:54 -0400
Re: NiPdAu FINISH	George Milad	Thu, 5 Apr 2007 09:45:38 EDT
Re: ENIG PCB Shelf Life	Gerard O'Brien	Tue, 3 Apr 2007 12:24:41 -0500
Re: Space for marking board assembly	Graham Collins	Mon, 30 Apr 2007 08:49:44 -0400
Re: Fw: [TN] Conformal Coating Voids	Graham Naisbitt	Tue, 24 Apr 2007 18:30:19 +0100
Sharing SMT lines for Pb and Pb free processes	Greg Parke	Thu, 19 Apr 2007 11:53:28 -0400
Re: BGA Weights	Guy Ramsey	Thu, 26 Apr 2007 11:54:18 -0400
Re: Cleaning rosin flux with DI water..	Guy Ramsey	Mon, 9 Apr 2007 12:13:31 -0400
Re: Immersion Tin Wetting	Guy Ramsey	Tue, 3 Apr 2007 06:45:42 -0400
Re: via in pad	Guy Ramsey	Fri, 13 Apr 2007 17:36:23 -0400
Re: Conformal Coating Voids	Hernefjord Ingemar	Tue, 24 Apr 2007 08:39:50 +0200
Re: Conformal Coating Voids	Hernefjord Ingemar	Tue, 24 Apr 2007 14:26:41 +0200
Re: Friday, early start	Hernefjord Ingemar	Mon, 23 Apr 2007 16:23:11 +0200
Re: Placement of large flatpacks and BGAs close to board edge	Hernefjord Ingemar	Tue, 17 Apr 2007 08:18:47 +0200
Sand, sand, lots of sand	Hernefjord Ingemar	Mon, 2 Apr 2007 09:24:52 +0200
Re: solderability and soldering-ability	Hernefjord Ingemar	Fri, 27 Apr 2007 16:28:07 +0200
Re: solderability testing	Hernefjord Ingemar	Fri, 27 Apr 2007 14:25:00 +0200
Re: stainless compatibility in alkaline etchant	Hernefjord Ingemar	Mon, 16 Apr 2007 11:05:56 +0200
Re: stainless compatibility in alkaline etchant	Hernefjord Ingemar	Mon, 16 Apr 2007 11:54:06 +0200
Re: SV: [TN] SV: [TN] Tacking corners of BGAs	Hernefjord Ingemar	Wed, 18 Apr 2007 08:34:51 +0200
Re: Tacking corners of BGAs	Hernefjord Ingemar	Tue, 17 Apr 2007 08:51:26 +0200
Re: Tetra Etch	Hernefjord Ingemar	Fri, 20 Apr 2007 08:06:29 +0200
Cofired gold, solution to problem	Hfjord	Fri, 20 Apr 2007 22:02:58 +0200
Friday NTC, deutsch	Hfjord	Fri, 27 Apr 2007 17:29:38 +0200
Friday, early start	Hfjord	Thu, 19 Apr 2007 22:42:29 +0200
Placement of large flatpacks and BGAs close to board edge	Hfjord	Mon, 16 Apr 2007 18:53:37 +0200
SV: [TN] BGA Weights	Hfjord	Thu, 26 Apr 2007 23:15:48 +0200
SV: [TN] Cool Caps	Hfjord	Tue, 24 Apr 2007 21:06:39 +0200
SV: [TN] Fragility of Pb-free Solder Joints	Hfjord	Thu, 19 Apr 2007 23:12:17 +0200
SV: [TN] Friday NTC, deutsch	Hfjord	Fri, 27 Apr 2007 21:22:22 +0200
SV: [TN] Friday opinion poll	Hfjord	Mon, 16 Apr 2007 19:04:19 +0200
SV: [TN] Fw: [TN] Conformal Coating Voids	Hfjord	Tue, 24 Apr 2007 21:02:42 +0200
SV: [TN] Lead	Hfjord	Fri, 20 Apr 2007 18:23:23 +0200
SV: [TN] NTC An alternate view on lead in solders	Hfjord	Fri, 20 Apr 2007 17:48:14 +0200
SV: [TN] Off the wall question...	Hfjord	Wed, 18 Apr 2007 21:20:38 +0200
SV: [TN] Placement of large flatpacks and BGAs close to board edge	Hfjord	Mon, 16 Apr 2007 19:12:16 +0200
SV: [TN] Placement of large flatpacks and BGAs close to board edge	Hfjord	Mon, 16 Apr 2007 20:00:48 +0200
SV: [TN] Placement of large flatpacks and BGAs close to board edge	Hfjord	Mon, 16 Apr 2007 20:02:52 +0200
SV: [TN] Quadpack solder joint failures	Hfjord	Wed, 25 Apr 2007 19:18:56 +0200
SV: [TN] Quadpack solder joint failures	Hfjord	Wed, 25 Apr 2007 21:45:09 +0200
SV: [TN] Reference info needed	Hfjord	Wed, 4 Apr 2007 22:28:04 +0200
SV: [TN] Semi rigid coax cable	Hfjord	Sat, 7 Apr 2007 16:56:54 +0200
SV: [TN] SV: [TN] BGA Weights	Hfjord	Fri, 27 Apr 2007 17:22:40 +0200
SV: [TN] SV: [TN] Cool Caps	Hfjord	Wed, 25 Apr 2007 21:28:43 +0200
SV: [TN] SV: [TN] Off the wall question...	Hfjord	Wed, 18 Apr 2007 23:14:15 +0200
SV: [TN] SV: [TN] Placement of large flatpacks and BGAs close to board edge, thanks all!	Hfjord	Mon, 16 Apr 2007 21:23:19 +0200
SV: [TN] SV: [TN] Quadpack solder joint failures	Hfjord	Wed, 25 Apr 2007 21:34:39 +0200
SV: [TN] SV: [TN] SV: [TN] Cofired gold	Hfjord	Wed, 4 Apr 2007 19:40:30 +0200
SV: [TN] SV: [TN] SV: [TN] Off the wall question...	Hfjord	Thu, 19 Apr 2007 18:58:18 +0200
SV: [TN] SV: [TN] Tacking corners of BGAs	Hfjord	Tue, 17 Apr 2007 22:17:05 +0200
SV: [TN] SV: [TN] Thermal via's on D2PAK	Hfjord	Mon, 9 Apr 2007 20:10:58 +0200
SV: [TN] Tacking corners of BGAs	Hfjord	Tue, 17 Apr 2007 18:51:05 +0200
SV: [TN] Tacking corners of BGAs	Hfjord	Tue, 17 Apr 2007 19:39:00 +0200
SV: [TN] Thermal via's on D2PAK	Hfjord	Sat, 7 Apr 2007 16:27:34 +0200
SV: [TN] unsubscribe	Hfjord	Thu, 19 Apr 2007 19:21:00 +0200
SV: [TN] Water stream	Hfjord	Thu, 5 Apr 2007 09:12:44 +0200
Tetra Etch	Hfjord	Thu, 19 Apr 2007 23:15:45 +0200
Re: Friday, early start	Hogg, Blair K.	Fri, 20 Apr 2007 08:28:54 -0400
Re: RoHS Documentation	Hogg, Blair K.	Thu, 19 Apr 2007 22:32:57 -0400
Re: Solder Resist Encroachment onto BGA pads	Hogg, Blair K.	Mon, 2 Apr 2007 14:56:57 -0400
Re: SV: [TN] Quadpack solder joint failures	Hogg, Blair K.	Thu, 26 Apr 2007 07:55:05 -0400
Re: SV: [TN] Tacking corners of BGAs	Hogg, Blair K.	Tue, 17 Apr 2007 14:28:34 -0400
Re: Tacking corners of BGAs	Hogg, Blair K.	Tue, 17 Apr 2007 12:33:31 -0400
Re: "plated shut vias"	Ian Hanna	Thu, 26 Apr 2007 17:30:23 -0400
Re: Fongus treatment	Ian Hanna	Tue, 10 Apr 2007 10:40:55 -0400
Re: Friday opinion poll	Ian Hanna	Fri, 13 Apr 2007 11:03:40 -0400
Re: IPC Document Dealing with WaveSoldering Trouble Shooting	Ian Hanna	Tue, 3 Apr 2007 09:29:03 -0400
Re: Space for marking board assembly	Ian Hanna	Fri, 27 Apr 2007 14:30:45 -0400
Quadpack solder joint failures	Inge	Mon, 23 Apr 2007 21:43:00 -0700
Re: SV: [TN] Fw: [TN] Conformal Coating Voids	Inge	Mon, 23 Apr 2007 21:23:22 -0700
Re: TechNet Digest - 27 Apr 2007 to 29 Apr 2007 (#2007-113)	Jack Olson	Mon, 30 Apr 2007 10:39:39 -0500
Harmonizing Code For a custom functional tester	James Verrette	Wed, 18 Apr 2007 14:55:56 -0400
Re: Thermal via's on D2PAK	Jerry Dengler	Thu, 5 Apr 2007 12:05:24 -0400
Fragility of Pb-free Solder Joints	Joe Fjelstad	Thu, 19 Apr 2007 14:19:22 EDT
Re: Fragility of Pb-free Solder Joints	Joe Fjelstad	Thu, 19 Apr 2007 14:38:09 EDT
Re: Fragility of Pb-free Solder Joints	Joe Fjelstad	Fri, 20 Apr 2007 20:33:30 EDT
Re: NiPdAu FINISH	Joe Fjelstad	Wed, 4 Apr 2007 18:25:20 EDT
Re: NiPdAu FINISH	Joe Fjelstad	Wed, 4 Apr 2007 19:18:32 EDT
Re: NTC Alternative lead free soldering reviewed	Joe Fjelstad	Sun, 1 Apr 2007 16:19:30 EDT
Re: NTC An alternate view on lead in solders	Joe Fjelstad	Wed, 18 Apr 2007 15:21:20 -0400
Re: NTC An alternate view on lead in solders	Joe Fjelstad	Fri, 20 Apr 2007 12:47:47 EDT
Re: NTC An alternate view on lead in solders	Joe Fjelstad	Fri, 20 Apr 2007 12:53:39 EDT
Re: RoHS/WEEE Directives - Your Opportunity to be Heard	Joe Fjelstad	Mon, 30 Apr 2007 18:23:02 EDT
Re: SV: [TN] Cool Caps	Joe Fjelstad	Wed, 25 Apr 2007 12:51:45 EDT
Re: Tacking corners of BGAs	Joe Fjelstad	Tue, 17 Apr 2007 12:33:48 EDT
Re: [LF] RoHS/WEEE Directives - Your Opportunity to be Heard	Joe Fjelstad	Mon, 30 Apr 2007 16:55:45 EDT
Re: [LF] RoHS/WEEE Directives - Your Opportunity to be Heard	Joe Fjelstad	Mon, 30 Apr 2007 17:07:28 EDT
Re: bubbles in conformal coating	Joel Alexander	Wed, 25 Apr 2007 11:50:09 -0400
Re: bubbles in conformal coating	Joel Alexander	Mon, 30 Apr 2007 08:49:48 -0400
Conformal Coating Voids	Joel Alexander	Mon, 23 Apr 2007 15:46:50 -0400
Fw: [TN] Conformal Coating Voids	Joel Alexander	Tue, 24 Apr 2007 10:12:04 -0400
Korea RoHS translation	John Burke	Thu, 19 Apr 2007 11:52:41 -0700
NTC An alternate view on lead in solders	John Burke	Wed, 18 Apr 2007 11:40:44 -0700
NTC Carbon Footprint term definition	John Burke	Sun, 29 Apr 2007 15:22:12 -0700
Re: NTC solderability testing	John Burke	Wed, 25 Apr 2007 16:54:16 -0700
Re: NTC solderability testing	John Burke	Thu, 26 Apr 2007 08:23:47 -0700
Re: Placement of large flatpacks and BGAs close to board edge	John Burke	Mon, 16 Apr 2007 11:35:31 -0700
Re: SN100C vs. SAC305	John Burke	Mon, 30 Apr 2007 12:01:38 -0700
Re: SV: [TN] Friday opinion poll	John Burke	Mon, 16 Apr 2007 11:38:34 -0700
Re: SV: [TN] NTC An alternate view on lead in solders	John Burke	Fri, 20 Apr 2007 11:59:55 -0700
Re: SV: [TN] ROHS lead free question (NTC)	John Burke	Sun, 1 Apr 2007 15:33:54 -0700
Re: Tacking corners of BGAs	John Burke	Mon, 16 Apr 2007 16:14:34 -0700
Re: Tacking corners of BGAs	John Burke	Tue, 17 Apr 2007 09:01:55 -0700
Re: Water stream	John Burke	Wed, 4 Apr 2007 17:09:41 -0700
Re: "plated shut vias"	John Foster	Thu, 26 Apr 2007 08:37:01 -0700
Re: "plated shut vias"	John Foster	Fri, 27 Apr 2007 13:08:02 -0700
Re: Placement of large flatpacks and BGAs close to board edge	John Maxwell	Mon, 16 Apr 2007 10:36:11 -0700
Re: SV: [TN] Quadpack solder joint failures	Jones, Evamaria	Wed, 25 Apr 2007 16:18:48 -0400
Re: Fongus treatment	Joyce Koo	Tue, 10 Apr 2007 08:52:54 -0400
Re: IPC 6012 : Outgassing Criteria	Joyce Koo	Tue, 3 Apr 2007 16:38:49 -0400
Re: SV: [TN] Tacking corners of BGAs	Joyce Koo	Tue, 17 Apr 2007 13:48:04 -0400
unsubscribe	Joyce Koo	Thu, 19 Apr 2007 12:15:59 -0400
Re: FW: [TN] IPC 6012 : Outgassing Criteria	Joyce Koo	Wed, 4 Apr 2007 08:49:29 -0400
Lead-Free AVX Caps	Kane, Amol (349)	Fri, 27 Apr 2007 07:59:42 -0400
LF Reflow on a Cap	Kane, Amol (349)	Mon, 2 Apr 2007 15:18:31 -0400
Re: LF Reflow on a Cap	Kane, Amol (349)	Tue, 3 Apr 2007 07:19:47 -0400
BGA Head In Pillow	Kane, Joseph E (US SSA)	Fri, 20 Apr 2007 14:07:25 -0400
Cool Caps	Kane, Joseph E (US SSA)	Mon, 23 Apr 2007 17:24:33 -0400
Inspection Under BGA's	Kane, Joseph E (US SSA)	Fri, 6 Apr 2007 14:45:52 -0400
Re: "plated shut vias"	Karl Hunsinger	Fri, 27 Apr 2007 14:42:10 -0400
Re: "plated shut vias"	Karl Hunsinger	Fri, 27 Apr 2007 14:57:20 -0400
Lead	Karl Hunsinger	Fri, 20 Apr 2007 11:21:06 -0400
Re: [BULK] [TN] "plated shut vias"	Karl Hunsinger	Thu, 26 Apr 2007 12:40:45 -0400
Re: BGA Weights	Kathy Kuhlow	Wed, 25 Apr 2007 15:33:13 -0500
Re: Cosmetic Specification	Kathy Kuhlow	Thu, 5 Apr 2007 12:18:07 -0500
Re: Missing HASL	Kathy Kuhlow	Mon, 9 Apr 2007 09:42:52 -0500
Re: NTC Tombstoning MELF	Kathy Kuhlow	Mon, 2 Apr 2007 15:05:59 -0500
NTC: Need a contact	Kathy Kuhlow	Wed, 25 Apr 2007 13:37:11 -0500
Ionic Testing termination (Rose Testing)	Kelly Morris	Tue, 3 Apr 2007 16:12:33 -0500
Re: Fragility of Pb-free Solder Joints	Kerry McMullen	Thu, 19 Apr 2007 14:28:50 -0400
Re: Thermal via's on D2PAK	Kerry McMullen	Thu, 5 Apr 2007 13:50:41 -0400
Cleaning rosin flux with DI water..	Kevin Glidden	Mon, 9 Apr 2007 09:08:22 -0400
Target Exit Temp from Reflow Oven	Kevin Glidden	Wed, 4 Apr 2007 08:31:07 -0400
Re: Water-break Test	Kevin Glidden	Wed, 11 Apr 2007 11:32:27 -0400
Friday opinion poll	Kim Sterling	Fri, 13 Apr 2007 09:17:52 -0500
Re: No more leaded solder	Kong Hui Poh	Thu, 19 Apr 2007 22:36:35 +0800
Re: Immersion Silver	Lee parker	Tue, 17 Apr 2007 10:19:20 -0400
Re: solderability testing	Lee parker	Mon, 23 Apr 2007 10:39:46 -0400
Re: solderability testing	Lee parker	Wed, 25 Apr 2007 08:21:40 -0400
Re: Via hole plating corner crack	Lee parker	Wed, 11 Apr 2007 12:41:40 -0400
Re: Via hole plating corner crack	Lee parker	Fri, 13 Apr 2007 19:38:03 -0400
Re: ENIG vs. IG over Copper DIG.	Liang Yin	Tue, 1 May 2007 01:32:04 +0000
Re: solderability testing	Liang Yin	Tue, 24 Apr 2007 23:04:10 -0500
Re: solderability testing	Liang Yin	Wed, 25 Apr 2007 10:20:55 -0500
Re: solderability testing	Liang Yin	Wed, 25 Apr 2007 10:43:34 -0500
Re: Sn-2Cu plating solderability question	Louis, Edwin @ CSE	Mon, 2 Apr 2007 12:33:47 -0400
Re: Cool Caps	Macko, Joe @ IEC	Wed, 25 Apr 2007 13:03:41 -0700
Sn-2Cu plating solderability question	Macko, Joe @ IEC	Mon, 2 Apr 2007 09:00:51 -0700
Re: Sn-2Cu plating solderability question	Macko, Joe @ IEC	Mon, 2 Apr 2007 10:27:21 -0700
Re: Placement of large flatpacks and BGAs close to board edge	Marsico, James	Mon, 16 Apr 2007 13:29:35 -0400
Semi rigid coax cable	Marsico, James	Thu, 5 Apr 2007 14:06:32 -0400
Water-break Test	Marsico, James	Mon, 9 Apr 2007 14:22:55 -0400
Re: Water-break Test	Marsico, James	Mon, 9 Apr 2007 14:48:02 -0400
Re: Water-break Test	Marsico, James	Mon, 9 Apr 2007 16:33:20 -0400
Re: Water-break Test	Marsico, James	Wed, 11 Apr 2007 10:27:41 -0400
Re: Water-break Test	Marsico, James	Wed, 11 Apr 2007 11:38:05 -0400
Missing HASL	Marty W. Sheppard	Thu, 5 Apr 2007 12:28:32 -0500
MPM Service	Matt Kehoe-SIPAD Systems	Mon, 2 Apr 2007 18:37:41 -0400
Re: SV: [TN] SV: [TN] Cofired gold	Matt Kehoe-SIPAD Systems	Mon, 2 Apr 2007 08:53:29 -0400
Mehmet Emin Yaman is out of the office ...	Mehmet Emin Yaman	Mon, 16 Apr 2007 16:02:02 +0300
Adhesive suggestion	Miguel Vallejo	Fri, 27 Apr 2007 10:12:34 -0700
Re: SN100C vs. SAC305	Miguel Vallejo	Mon, 30 Apr 2007 15:21:26 -0700
Re: Fragility of Pb-free Solder Joints	Mike Buetow	Thu, 19 Apr 2007 14:25:12 -0400
Re: stainless compatibility in alkaline etchant	Mike Fenner	Mon, 16 Apr 2007 12:38:34 +0100
Re: solderability testing	Munie, Gregory	Mon, 23 Apr 2007 10:07:42 -0500
Re: Cool Caps	Paul Edwards	Tue, 24 Apr 2007 09:35:56 -0700
Re: "plated shut vias"	Paymon Sani	Fri, 27 Apr 2007 16:38:45 -0400
Re: "plated shut vias"	Paymon Sani	Mon, 30 Apr 2007 11:56:12 -0400
ENIG PCB Shelf Life	Paymon Sani	Tue, 3 Apr 2007 10:18:10 -0400
Re: ENIG PCB Shelf Life	Paymon Sani	Tue, 3 Apr 2007 11:18:18 -0400
High Magnification Microscope	Paymon Sani	Thu, 5 Apr 2007 08:37:15 -0400
Re: High Magnification Microscope	Paymon Sani	Thu, 5 Apr 2007 08:47:18 -0400
Re: Solder Resist Encroachment onto BGA pads	Paymon Sani	Mon, 2 Apr 2007 14:11:42 -0400
Re: Tombstoning MELF	Paymon Sani	Mon, 2 Apr 2007 12:06:55 -0400
Space for marking board assembly	Phil Nutting	Thu, 26 Apr 2007 16:20:58 -0400
Re: Space for marking board assembly	Phil Nutting	Fri, 27 Apr 2007 08:20:47 -0400
panellization clearences	pras chop	Tue, 17 Apr 2007 08:00:14 +0100
Panellization query -- need urgent inputs	pras chop	Wed, 18 Apr 2007 10:06:06 +0100
Re: SV: [TN] Thermal via's on D2PAK	Preuschl, Thomas	Tue, 10 Apr 2007 14:29:08 +0200
Re: Immersion Tin Wetting	R Sedlak	Tue, 3 Apr 2007 03:47:00 -0700
Re: NTC Alternative lead free soldering reviewed	R Sedlak	Sun, 1 Apr 2007 09:23:56 -0700
Re: Water-break Test	R Sedlak	Mon, 9 Apr 2007 11:31:30 -0700
Re: (Fwd) Inquiry on maximum temperature	r Tarzwell	Sun, 1 Apr 2007 12:27:35 -0500
Re: Tetra Etch	Ralph Richart	Thu, 19 Apr 2007 20:05:17 -0700
Re: Glyptol Technical Data Sheet	Randy Bock Sr.	Thu, 19 Apr 2007 10:22:36 -0400
Fongus treatment	Reuven Rokah	Tue, 10 Apr 2007 09:48:58 +0300
Re: Fongus treatment	Reuven Rokah	Tue, 10 Apr 2007 15:12:07 +0300
Re: pad lifting	Reuven Rokah	Wed, 11 Apr 2007 10:09:12 +0300
Re: SV: [TN] SV: [TN] Cool Caps	Reuven Rokah	Wed, 25 Apr 2007 22:52:50 +0300
Testing Strategy - Players in the Industry	Rich Lasko	Wed, 25 Apr 2007 15:28:57 -0500
Glyptol Technical Data Sheet	Richard Kraszewski	Thu, 19 Apr 2007 09:18:45 -0500
Re: Glyptol Technical Data Sheet	Richard Kraszewski	Thu, 19 Apr 2007 09:34:50 -0500
IPC Document Dealing with WaveSoldering Trouble Shooting	Richard Kraszewski	Tue, 3 Apr 2007 07:45:43 -0500
Re: IPC-M-675	Richard Kraszewski	Mon, 23 Apr 2007 16:40:33 -0500
Re: solderability testing	Richard Kraszewski	Mon, 23 Apr 2007 10:57:33 -0500
Immersion Tin Wetting	Richard Olsen	Mon, 2 Apr 2007 17:00:25 -0700
NiPdAu FINISH	Roberts, Jon	Wed, 4 Apr 2007 16:31:52 -0500
Re: Terminals	Roger Stoops	Mon, 16 Apr 2007 14:38:13 -0400
Re: Question on "semi additive" process	Roland Jaquet	Mon, 30 Apr 2007 15:18:14 +0200
BGA Weights	Ron Peeler	Wed, 25 Apr 2007 16:23:12 -0400
Re: BGA Weights	Ron Peeler	Wed, 25 Apr 2007 16:36:10 -0400
Re: BGA Weights	Ron Peeler	Wed, 25 Apr 2007 16:37:40 -0400
Re: BGA Weights	Ron Peeler	Thu, 26 Apr 2007 08:37:46 -0400
Re: Water stream	Russ Winslow	Wed, 4 Apr 2007 21:03:38 -0700
Re: "plated shut vias"	Ryan Grant	Thu, 26 Apr 2007 10:44:49 -0600
RoHS/WEEE Directives - Your Opportunity to be Heard	Sahar Osman-Sypher	Mon, 30 Apr 2007 14:10:43 -0500
Re: NTC Tombstoning MELF	Scott Decker	Mon, 2 Apr 2007 09:01:36 -0700
Re: SV: [TN] ROHS lead free question (NTC)	Scott Decker	Mon, 2 Apr 2007 08:11:21 -0700
ENIG vs. IG over Copper DIG.	Scott Lefebvre	Mon, 30 Apr 2007 17:50:33 -0700
Re: Via hole plating corner crack	Scott Westheimer	Tue, 10 Apr 2007 11:37:17 -0400
Re: "plated shut vias"	Smith, Richard	Thu, 26 Apr 2007 14:54:42 -0400
Re: "plated shut vias"	Smith, Richard	Fri, 27 Apr 2007 10:05:15 -0400
Re: BGA Weights	Stadem, Richard D.	Wed, 25 Apr 2007 15:38:20 -0500
Re: BGA Weights	Stadem, Richard D.	Thu, 26 Apr 2007 09:27:35 -0500
Re: ENIG PCB Shelf Life	Stadem, Richard D.	Tue, 3 Apr 2007 10:05:36 -0500
Re: Friday, early start	Stadem, Richard D.	Mon, 23 Apr 2007 07:40:51 -0500
Re: Glyptol Technical Data Sheet	Stadem, Richard D.	Thu, 19 Apr 2007 09:22:00 -0500
Re: IPC 6012 : Outgassing Criteria	Stadem, Richard D.	Mon, 2 Apr 2007 15:49:24 -0500
Re: IPC-M-675	Stadem, Richard D.	Wed, 18 Apr 2007 08:11:23 -0500
Re: NiPdAu FINISH	Stadem, Richard D.	Thu, 5 Apr 2007 08:12:36 -0500
Re: NTC An alternate view on lead in solders	Stadem, Richard D.	Wed, 18 Apr 2007 14:35:29 -0500
Re: Off the wall question...	Stadem, Richard D.	Wed, 18 Apr 2007 13:47:53 -0500
Re: Placement of large flatpacks and BGAs close to board edge	Stadem, Richard D.	Mon, 16 Apr 2007 13:19:34 -0500
Re: Solder Resist Encroachment onto BGA pads	Stadem, Richard D.	Mon, 2 Apr 2007 06:52:05 -0500
Re: Solder Resist Encroachment onto BGA pads	Stadem, Richard D.	Mon, 2 Apr 2007 06:59:32 -0500
Re: SV: [TN] Fw: [TN] Conformal Coating Voids	Stadem, Richard D.	Tue, 24 Apr 2007 14:08:02 -0500
Re: Tacking corners of BGAs	Stadem, Richard D.	Tue, 17 Apr 2007 06:56:53 -0500
Re: Tacking corners of BGAs	Stadem, Richard D.	Tue, 17 Apr 2007 07:14:26 -0500
Re: Tacking corners of BGAs	Stadem, Richard D.	Tue, 17 Apr 2007 07:18:50 -0500
Re: Tombstoning MELF	Stadem, Richard D.	Mon, 2 Apr 2007 12:13:29 -0500
Re: [LF] RoHS/WEEE Directives - Your Opportunity to be Heard	Stadem, Richard D.	Mon, 30 Apr 2007 16:02:58 -0500
FW: [TN] IPC 6012 : Outgassing Criteria	Stadem, Richard D.	Tue, 3 Apr 2007 07:02:34 -0500
Re: BGA Weights	Steve Gregory	Thu, 26 Apr 2007 08:00:09 -0500
Re: Glyptol Technical Data Sheet	Steve Gregory	Thu, 19 Apr 2007 09:24:01 -0500
Re: High Magnification Microscope	Steve Gregory	Thu, 5 Apr 2007 07:41:35 -0500
Re: Metalized Poly Caps	Steve Gregory	Fri, 27 Apr 2007 06:59:08 -0500
Off the wall question...	Steve Gregory	Wed, 18 Apr 2007 13:38:04 -0500
Re: Off the wall question...	Steve Gregory	Wed, 18 Apr 2007 13:55:43 -0500
Re: solderability testing	Steve Gregory	Wed, 25 Apr 2007 07:08:35 -0500
Re: SV: [TN] Quadpack solder joint failures	Steve Gregory	Wed, 25 Apr 2007 15:47:08 -0500
Re: SV: [TN] SV: [TN] Tacking corners of BGAs	Steve Gregory	Tue, 17 Apr 2007 15:49:32 -0500
Re: unsubscribe	Steve Gregory	Thu, 19 Apr 2007 11:20:00 -0500
Immersion Silver	Steve Kelly	Tue, 17 Apr 2007 08:57:57 -0400
Re: IPC-M-675	Steve Mikell	Wed, 18 Apr 2007 15:49:46 -0400
Cosmetic Specification	Ted Kong	Thu, 5 Apr 2007 09:07:16 -0700
RoHS Documentation	Ted Kong	Thu, 19 Apr 2007 18:55:25 -0700
Re: NTC An alternate view on lead in solders	Tempea, Ioan	Fri, 20 Apr 2007 10:17:10 -0400
Re: Placement of large flatpacks and BGAs close to board edge	Tempea, Ioan	Mon, 16 Apr 2007 13:00:12 -0400
SN100C vs. SAC305	Tempea, Ioan	Mon, 30 Apr 2007 14:42:27 -0400
Re: SN100C vs. SAC305	Tempea, Ioan	Mon, 30 Apr 2007 15:31:27 -0400
solderability testing	Tempea, Ioan	Mon, 23 Apr 2007 10:12:55 -0400
Re: SV: [TN] Thermal via's on D2PAK	Tempea, Ioan	Mon, 9 Apr 2007 07:55:59 -0400
17th Shanghai International SMT High-Level Conference, 24-26 April 2007	Tina Nerad	Mon, 16 Apr 2007 15:16:50 -0500
IPC Compliant Electronics for EU Applications workshop, May 8 & 9, 2007, in Philadelphia, PA	Tina Nerad	Thu, 19 Apr 2007 10:17:45 -0500
IPC Design for Manufacture Workshop, 17 April 2007, Leeds, U.K.	Tina Nerad	Thu, 12 Apr 2007 13:43:51 -0500
IPC Designing and Building a Board with Embedded Passive Components Workshop, April 24-25, 2007, in Crane, IN	Tina Nerad	Wed, 18 Apr 2007 15:50:05 -0500
IPC International Conference on LF Materials & Surface Finishes, May 8 & 9, 2007, in San Jose, CA	Tina Nerad	Tue, 24 Apr 2007 11:51:56 -0500
IPC webcast: Embedded Passive Components - Costs More or Costs Less? - 5/16/07	Tina Nerad	Thu, 5 Apr 2007 08:29:57 -0500
IPC workshop - Designing with Your 'Thumbs' workshop - 5/21/07, in Bannockburn, IL	Tina Nerad	Mon, 2 Apr 2007 15:10:02 -0500
IPC Workshop: Compliant Electronics for EU Applications, 28-29 May 2007, Singapore, SG	Tina Nerad	Tue, 10 Apr 2007 09:47:33 -0500
IPC Workshop: Compliant Electronics for EU Applications, May 8 & 9, 2007, in Philadelphia, PA	Tina Nerad	Wed, 25 Apr 2007 08:35:13 -0500
Upcoming informative IPC events you shouldn't miss!	Tina Nerad	Tue, 3 Apr 2007 16:00:56 -0500
Upcoming IPC workshops beig held in Singapore, SG	Tina Nerad	Mon, 23 Apr 2007 09:39:39 -0500
Upcoming IPC Workshops being offered in Bannockbun, IL	Tina Nerad	Thu, 26 Apr 2007 10:45:40 -0500
Upcoming IPC workshops on Design	Tina Nerad	Mon, 23 Apr 2007 15:17:14 -0500
Dome Switch finish	Tom Burek	Wed, 18 Apr 2007 15:55:48 -0600
Re: Friday NTC, deutsch	Torben Østeraa (GPV Printca A/S)	Fri, 27 Apr 2007 20:36:02 +0200
Re: Via hole plating corner crack	ts503	Fri, 13 Apr 2007 10:22:55 +0530
Re: NTC An alternate view on lead in solders	Upton, Shawn	Fri, 20 Apr 2007 09:07:09 -0400
Re: High Magnification Microscope	Victor G. Hernandez	Thu, 5 Apr 2007 09:19:28 -0500
Re: Inspection Under BGA's	Victor G. Hernandez	Wed, 11 Apr 2007 08:17:03 -0500
Re: Solder Resist Encroachment onto BGA pads	Victor G. Hernandez	Mon, 2 Apr 2007 07:21:10 -0500
Re: SV: [TN] Quadpack solder joint failures	Victor G. Hernandez	Wed, 25 Apr 2007 12:27:10 -0500
Re: SV: [TN] Quadpack solder joint failures	Victor G. Hernandez	Wed, 25 Apr 2007 16:08:40 -0500
Re: SV: [TN] Thermal via's on D2PAK	Victor G. Hernandez	Mon, 9 Apr 2007 07:52:34 -0500
Re: Tacking corners of BGAs	Victor G. Hernandez	Tue, 17 Apr 2007 07:07:49 -0500
Re: Via hole plating corner crack	Victor G. Hernandez	Tue, 10 Apr 2007 09:36:09 -0500
Re: BGA Weights	Vladimir Igoshev	Thu, 26 Apr 2007 11:17:39 -0400
Re: NiPdAu FINISH	Vladimir Igoshev	Thu, 5 Apr 2007 09:57:22 -0400
Re: NiPdAu FINISH	Vladimir Igoshev	Thu, 5 Apr 2007 10:41:01 -0400
Re: BGA Weights	Wayne Thayer	Wed, 25 Apr 2007 16:35:06 -0400
Re: Off the wall question...	Wayne Thayer	Thu, 19 Apr 2007 09:15:05 -0400
Re: Panellization query -- need urgent inputs	Wayne Thayer	Wed, 18 Apr 2007 08:01:31 -0400
Re: Quadpack solder joint failures	Wayne Thayer	Wed, 25 Apr 2007 12:30:06 -0400
Re: SV: [TN] SV: [TN] Cofired gold	Wayne Thayer	Sun, 1 Apr 2007 21:37:32 -0400
Re: SV: [TN] SV: [TN] Cofired gold	Wayne Thayer	Mon, 2 Apr 2007 08:42:06 -0400
Re: SV: [TN] SV: [TN] Cofired gold	Wayne Thayer	Tue, 3 Apr 2007 09:15:48 -0400
Re: Cleaning rosin flux with DI water..	Wenger, George M.	Mon, 9 Apr 2007 09:18:37 -0400
Re: Immersion Silver	Wenger, George M.	Tue, 17 Apr 2007 09:03:19 -0400
Re: NTC solderability testing	Wenger, George M.	Wed, 25 Apr 2007 20:30:36 -0400
Re: solderability testing	Wenger, George M.	Wed, 25 Apr 2007 06:22:55 -0400
Re: "plated shut vias"	Werner Engelmaier	Thu, 26 Apr 2007 15:23:00 EDT
Re: "plated shut vias"	Werner Engelmaier	Thu, 26 Apr 2007 17:30:52 EDT
Re: "plated shut vias"	Werner Engelmaier	Fri, 27 Apr 2007 13:35:07 EDT
Re: "plated shut vias"	Werner Engelmaier	Fri, 27 Apr 2007 14:49:48 EDT
Re: "plated shut vias"	Werner Engelmaier	Fri, 27 Apr 2007 15:49:29 EDT
Re: "plated shut vias"	Werner Engelmaier	Fri, 27 Apr 2007 16:10:48 EDT
Re: "plated shut vias"	Werner Engelmaier	Fri, 27 Apr 2007 17:26:19 EDT
Re: BGA Weights	Werner Engelmaier	Wed, 25 Apr 2007 18:17:41 EDT
Re: Friday NTC, deutsch	Werner Engelmaier	Fri, 27 Apr 2007 13:39:13 EDT
Re: LF Reflow on a Cap	Werner Engelmaier	Mon, 2 Apr 2007 16:08:46 EDT
Re: LF Reflow on a Cap	Werner Engelmaier	Tue, 3 Apr 2007 10:25:51 EDT
Re: NiPdAu FINISH	Werner Engelmaier	Wed, 4 Apr 2007 19:07:59 EDT
Re: NTC Tombstoning MELF	Werner Engelmaier	Mon, 2 Apr 2007 12:10:11 EDT
Re: Quadpack solder joint failures	Werner Engelmaier	Tue, 24 Apr 2007 17:37:31 EDT
Reference info needed	Werner Engelmaier	Wed, 4 Apr 2007 15:34:20 EDT
Re: Reference info needed	Werner Engelmaier	Wed, 4 Apr 2007 16:27:16 EDT
Reference needed	Werner Engelmaier	Thu, 5 Apr 2007 16:29:13 EDT
Re: Reference needed	Werner Engelmaier	Mon, 9 Apr 2007 14:04:00 EDT
Re: Reference needed	Werner Engelmaier	Mon, 9 Apr 2007 16:06:29 EDT
Re: SN100C vs. SAC305	Werner Engelmaier	Mon, 30 Apr 2007 15:41:50 EDT
Re: Solder Resist Encroachment onto BGA pads	Werner Engelmaier	Mon, 2 Apr 2007 09:11:51 EDT
Re: SV: [TN] Friday NTC, deutsch	Werner Engelmaier	Fri, 27 Apr 2007 15:28:19 EDT
Re: SV: [TN] Quadpack solder joint failures	Werner Engelmaier	Wed, 25 Apr 2007 16:13:44 EDT
Re: SV: [TN] SV: [TN] Off the wall question...	Werner Engelmaier	Wed, 18 Apr 2007 17:26:45 EDT
Re: SV: [TN] Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 13:45:54 EDT
Re: SV: [TN] Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 14:31:03 EDT
Re: Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 11:31:54 EDT
Re: Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 11:37:39 EDT
Re: Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 12:46:12 EDT
Re: Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 13:09:39 EDT
Re: Tacking corners of BGAs	Werner Engelmaier	Tue, 17 Apr 2007 13:11:48 EDT
Re: Tombstoning MELF	Werner Engelmaier	Mon, 2 Apr 2007 11:25:36 EDT
Re: Via hole plating corner crack	Werner Engelmaier	Tue, 10 Apr 2007 10:50:12 EDT
Re: Friday opinion poll	Whittaker, Dewey (EHCOE)	Fri, 13 Apr 2007 07:53:27 -0700
Re: NTC Tombstoning MELF	Whittaker, Dewey (EHCOE)	Mon, 2 Apr 2007 09:06:47 -0700
Re: Placement of large flatpacks and BGAs close to board edge	Whittaker, Dewey (EHCOE)	Mon, 16 Apr 2007 10:12:12 -0700
Re: stainless compatibility in alkaline etchant	Whittaker, Dewey (EHCOE)	Mon, 16 Apr 2007 06:40:00 -0700
Re: SV: [TN] ROHS lead free question (NTC)	Whittaker, Dewey (EHCOE)	Mon, 2 Apr 2007 06:49:53 -0700
Re: Panellization query -- need urgent inputs	Wolfe, Robert	Wed, 18 Apr 2007 11:17:49 -0400
IPC netlist	Wood, Kenneth	Wed, 18 Apr 2007 07:40:06 -0400
Re: IPC netlist	Wood, Kenneth	Wed, 18 Apr 2007 10:47:23 -0400
Re: Via hole plating corner crack	ZLATKO BIJEDIC	Fri, 13 Apr 2007 15:06:22 -0700

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

TECHNET Archives

April 2007

TechNet@IPC.ORG

Subject

From

Date