LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


February 2007


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"AFE" Boards (5 messages)
"Fisheyes" (8 messages)
#2 need help with cracking vias (2 messages)
0.5 inch breakaway rail on board edges (4 messages)
3D X-Ray Services (2 messages)
<List>Re: [TN] APEX (3 messages)
<List>Re: [TN] Immersion silver handling (1 message)
<List>[TN] Copper balancing (1 message)
<No subject> (5 messages)
<WL>Re: [TN] Immersion silver handling (3 messages)
Alan Kreplick is out of the office. (1 message)
APEX (25 messages)
APEX (NTC for Friday) (3 messages)
APEX - NTC (4 messages)
APEX NTC (6 messages)
Article in circuits assembly (1 message)
AS 9100 (1 message)
ASSY: PCI Express Connector (2 messages)
Baking Moisture sensitive devices that are on a real. (4 messages)
Baking Moisture sensitive devices that are on a reel. (2 messages)
BGA ball current (3 messages)
BGA Carrier pad nickel plating (1 message)
BGA Preinspection Method... (6 messages)
Bill Kasprzak is out of the office. (1 message)
Cadstar to Expedition conversion (1 message)
China / Solder Longevity (2 messages)
CIMBridge? (2 messages)
Component Orientation Survey (1 message)
Conformal Coat masking tape and dots (1 message)
Conformal coated Tantalum Cap - Placement issues? (1 message)
Conformal Coating Masking Requirements (5 messages)
Copper balancing (2 messages)
Costing of Components (5 messages)
Delamination x-rays (1 message)
Differences - Similarities between J-STD-001 and IPC-A-610 (4 messages)
Disconnections in transition zone in rigid-flex boards (10 messages)
Engineering Spec for Stencil 6 Mils, 7 Mils, 8 Mils. (1 message)
ESD Question (3 messages)
FOD for Thought (1 message)
FOD Prevention (3 messages)
FW: IPC-A-610D (1 message)
FW: January 2007 ESD Systems.com Newsletter (6 messages)
FW: Report from a BGA (38 messages)
FW: Report from a BGA NTC (2 messages)
FW: [SMART] NPL Studio Project (1 message)
FW: [TN] FW: January 2007 ESD Systems.com Newsletter (1 message)
FW: [TN] Humiseal Masking Tape Residues/latex peelable (1 message)
Gold Finger Contact Pad omission (4 messages)
Henry Rekers is out of the office. (1 message)
Hot solder dip to mitigate Sn whiskers (2 messages)
Humiseal Masking Tape Residues... (3 messages)
Humiseal Masking Tape Residues/latex peelable (23 messages)
I'll be late Friday (1 message)
Immersion silver handling (12 messages)
IPC announces Design for Manufacture workshop in Leeds, UK (1 message)
IPC webcast series on RoHS Compliance Medical Monitoring & Control Equipment (1 message)
IPC Webcast: Outsourcing: The Importance of Supply Chain Coordination - 4/4/07 (1 message)
IPC workshops on Lead Free Issues - April, 2007, in Bannockburn, IL (1 message)
IPC'S Compliant Electronics for EU Applications - 3/13-14/07 - Dallas, TX & 3/22-23/07 - San Jose, CA (1 message)
IPC's Compliant Electronics for EU Applications - March 13-14, 2007 in Dallas, TX (1 message)
IPC/JEDEC Lead Free Reliability & Reliability Testing for RoHS LF Electronics Conference, 4/10-12/07 in Boston, MA (1 message)
IPC/Soldertec Global International Conference on LF Reliability - San Sebastian, Spain (1 message)
Kester 197 RMA Flux...anybody have some? (6 messages)
Korea's version of the RoHS, ELV and WEEE Directives (1 message)
Large PWB Supplier (2 messages)
Latex Peelable Soldermask (5 messages)
leaching of solder joints (2 messages)
Lead Free Reliability and Test Conference - Register TODAY (1 message)
Lead Protrusion (6 messages)
LF BGA in Leaded Solder Process (1 message)
LPI soldermask resolution (13 messages)
Max Humidity allowed (6 messages)
Maximum Au lead plating thickness (2 messages)
Mechanical Stress on solder joints (11 messages)
MSD allowable time out of MBB before bake out is required (1 message)
need help with cracking vias (13 messages)
NTC - APEX / IPC Show - Lost Ring - need help (1 message)
Number of allowed X-outs? (1 message)
OSP surface finish for lead free wave slodering process (5 messages)
PCB baking (1 message)
Plasma Surface Treatment For Conformal Coat (4 messages)
Prediction comes true (7 messages)
Prediction comes true (NTC) (4 messages)
Preforms Adhesives (4 messages)
PWB panels (10 messages)
REAL TIME STRESS STRAIN MEASUREMENT (1 message)
Really big oops... (4 messages)
Register Now For Compliant Electronics for EU Applications Workshop! (1 message)
Register now for IPC Designing & Building a Board w/Embedded Passive Components - April 24-25, 2007 - Crane, IN (1 message)
Register now for IPC's workshops in Bannockburn, IL (1 message)
Register today for RoHS Compliance Medical Monitoring & Control Equipment Webcast Series (1 message)
Report From a BGA-Part 2 now available (1 message)
RoHs exemption record (2 messages)
Safety in PCB processing (1 message)
SI recommendation (2 messages)
Solder Ball Stick beneath of the chip resistor/ capacitor. (3 messages)
Soldering to Pt/Ag component terminations. (1 message)
Soldering to Pt/Ag terminations (8 messages)
Spacing Requirement for Adjacent PFP pads carrying 70V (3 messages)
stencil apertures (4 messages)
Stencil order specification (2 messages)
Stencil Tensioning Systems (3 messages)
Sunsda conveyors (1 message)
Tape and Reel source in Korea (1 message)
test (2 messages)
Test Fixture Verification Methods (2 messages)
The continuing BGA story (2 messages)
Thick Boards (6 messages)
Tooling Hole Quantity (6 messages)
Traces between 0402 pads (3 messages)
type UR conformal coatings (1 message)
UNDER CURED EPOXY ON PWB (1 message)
Using Type AR Conformal Coating (10 messages)
Via in Pad question (16 messages)
What to do with expired solder paste? (19 messages)
[LF] Korea's version of the RoHS, ELV and WEEE Directives (1 message)
[SPAM] Re: [TN] Tooling Hole Quantity (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

"AFE" Boards

"AFE" Boards

Dale Ritzen <[log in to unmask]>

Tue, 27 Feb 2007 07:53:22 -0600

30 lines

Re: "AFE" Boards

Linda Langley <[log in to unmask]>

Tue, 27 Feb 2007 09:02:11 -0500

81 lines

Re: "AFE" Boards

Bill Kasprzak <[log in to unmask]>

Tue, 27 Feb 2007 09:03:59 -0500

80 lines

Re: "AFE" Boards

Dehoyos, Ramon <[log in to unmask]>

Tue, 27 Feb 2007 09:29:42 -0500

143 lines

Re: "AFE" Boards

Dan Mauro <[log in to unmask]>

Tue, 27 Feb 2007 09:23:47 -0500

111 lines

New Thread

"Fisheyes"

"Fisheyes"

Dan Skweres <[log in to unmask]>

Thu, 22 Feb 2007 10:40:47 -0600

28 lines

Re: "Fisheyes"

Wayne Thayer <[log in to unmask]>

Thu, 22 Feb 2007 12:44:21 -0500

62 lines

Re: "Fisheyes"

Dan Skweres <[log in to unmask]>

Thu, 22 Feb 2007 11:55:23 -0600

89 lines

Re: "Fisheyes"

Wayne Thayer <[log in to unmask]>

Thu, 22 Feb 2007 15:54:51 -0500

120 lines

Re: "Fisheyes"

Dan Skweres <[log in to unmask]>

Thu, 22 Feb 2007 15:12:31 -0600

142 lines

Re: "Fisheyes"

Wayne Thayer <[log in to unmask]>

Thu, 22 Feb 2007 16:45:47 -0500

174 lines

Re: "Fisheyes"

Dan Skweres <[log in to unmask]>

Thu, 22 Feb 2007 15:58:10 -0600

201 lines

Re: "Fisheyes"

Jeffrey Bush <[log in to unmask]>

Fri, 23 Feb 2007 08:00:53 -0500

60 lines

New Thread

#2 need help with cracking vias

Re: #2 need help with cracking vias

Werner Engelmaier <[log in to unmask]>

Sat, 24 Feb 2007 17:57:32 EST

39 lines

Re: #2 need help with cracking vias

John Foster <[log in to unmask]>

Sat, 24 Feb 2007 15:31:28 -0800

77 lines

New Thread

0.5 inch breakaway rail on board edges

0.5 inch breakaway rail on board edges

Phil Nutting <[log in to unmask]>

Tue, 20 Feb 2007 08:35:24 -0500

37 lines

Re: 0.5 inch breakaway rail on board edges

Steve Gregory <[log in to unmask]>

Tue, 20 Feb 2007 07:39:37 -0600

66 lines

Re: 0.5 inch breakaway rail on board edges

Guy Ramsey <[log in to unmask]>

Tue, 20 Feb 2007 08:50:57 -0500

75 lines

Re: 0.5 inch breakaway rail on board edges

Tempea, Ioan <[log in to unmask]>

Tue, 20 Feb 2007 10:18:40 -0500

72 lines

New Thread

3D X-Ray Services

Re: 3D X-Ray Services

Bloomquist, Ken <[log in to unmask]>

Tue, 20 Feb 2007 07:34:20 -0800

47 lines

Re: 3D X-Ray Services

Joyce Koo <[log in to unmask]>

Tue, 20 Feb 2007 14:56:55 -0500

75 lines

New Thread

<List>Re: [TN] APEX

Re: <List>Re: [TN] APEX

Gary Warner <[log in to unmask]>

Mon, 26 Feb 2007 11:55:05 -0700

193 lines

Re: <List>Re: [TN] APEX

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 26 Feb 2007 12:03:16 -0700

262 lines

Re: <List>Re: [TN] APEX

Joe Russeau <[log in to unmask]>

Mon, 26 Feb 2007 14:04:28 -0500

248 lines

New Thread

<List>Re: [TN] Immersion silver handling

Re: <List>Re: [TN] Immersion silver handling

Gary Warner <[log in to unmask]>

Thu, 22 Feb 2007 12:06:56 -0700

99 lines

New Thread

<List>[TN] Copper balancing

Re: <List>[TN] Copper balancing

Gary Warner <[log in to unmask]>

Fri, 23 Feb 2007 10:12:21 -0700

80 lines

New Thread

<No subject>

<No subject>

Bruce Stilmack <[log in to unmask]>

Tue, 20 Feb 2007 08:29:06 -0500

33 lines

<No subject>

Steve Gregory <[log in to unmask]>

Tue, 20 Feb 2007 07:47:05 -0600

72 lines

<No subject>

John Burke <[log in to unmask]>

Tue, 20 Feb 2007 09:15:03 -0800

70 lines

<No subject>

[log in to unmask]

Sat, 24 Feb 2007 00:07:12 EST

39 lines

<No subject>

Matt Kehoe-SIPAD Systems <[log in to unmask]>

Sat, 24 Feb 2007 06:28:54 -0500

82 lines

New Thread

<WL>Re: [TN] Immersion silver handling

Re: <WL>Re: [TN] Immersion silver handling

Gary Warner <[log in to unmask]>

Thu, 22 Feb 2007 13:43:24 -0700

57 lines

Re: <WL>Re: [TN] Immersion silver handling

Stadem, Richard D. <[log in to unmask]>

Thu, 22 Feb 2007 15:24:27 -0600

85 lines

Re: <WL>Re: [TN] Immersion silver handling

Ian Hanna <[log in to unmask]>

Thu, 22 Feb 2007 16:32:47 -0500

110 lines

New Thread

Alan Kreplick is out of the office.

Alan Kreplick is out of the office.

Alan Kreplick <[log in to unmask]>

Mon, 19 Feb 2007 12:02:58 -0500

24 lines

New Thread

APEX

APEX

Joyce Koo <[log in to unmask]>

Thu, 22 Feb 2007 17:25:38 -0500

25 lines

Re: APEX

Bill Kasprzak <[log in to unmask]>

Fri, 23 Feb 2007 08:22:59 -0500

78 lines

APEX

Phil Zarrow <[log in to unmask]>

Fri, 23 Feb 2007 17:34:34 EST

30 lines

Re: APEX

stephengregory5849 <[log in to unmask]>

Fri, 23 Feb 2007 21:54:59 -0600

61 lines

Re: APEX

Joe Fjelstad <[log in to unmask]>

Sat, 24 Feb 2007 13:10:54 EST

45 lines

Re: APEX

Phil Zarrow <[log in to unmask]>

Mon, 26 Feb 2007 11:06:19 EST

72 lines

Re: APEX

Mike Buetow <[log in to unmask]>

Mon, 26 Feb 2007 11:32:55 -0500

50 lines

Re: APEX

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 26 Feb 2007 09:48:21 -0700

85 lines

Re: APEX

Joyce Koo <[log in to unmask]>

Mon, 26 Feb 2007 11:57:22 -0500

113 lines

Re: APEX

Bev Christian <[log in to unmask]>

Mon, 26 Feb 2007 13:11:27 -0500

121 lines

Re: APEX

Joe Russeau <[log in to unmask]>

Mon, 26 Feb 2007 13:36:57 -0500

160 lines

Re: APEX

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 26 Feb 2007 12:40:01 -0700

220 lines

Re: APEX

Joe Russeau <[log in to unmask]>

Mon, 26 Feb 2007 15:01:04 -0500

261 lines

Re: APEX

Stadem, Richard D. <[log in to unmask]>

Mon, 26 Feb 2007 14:22:59 -0600

148 lines

Re: APEX

Bill Kasprzak <[log in to unmask]>

Mon, 26 Feb 2007 15:42:39 -0500

188 lines

Re: APEX

Stadem, Richard D. <[log in to unmask]>

Mon, 26 Feb 2007 14:44:26 -0600

219 lines

Re: APEX

Mike Buetow <[log in to unmask]>

Mon, 26 Feb 2007 15:44:34 -0500

225 lines

Re: APEX

Steve Gregory <[log in to unmask]>

Mon, 26 Feb 2007 15:11:09 -0600

177 lines

Re: APEX

Joyce Koo <[log in to unmask]>

Mon, 26 Feb 2007 17:08:55 -0500

216 lines

Re: APEX

[log in to unmask]

Mon, 26 Feb 2007 17:51:16 EST

43 lines

Re: APEX

Hernefjord Ingemar <[log in to unmask]>

Tue, 27 Feb 2007 09:10:36 +0100

183 lines

Re: APEX

Werner Engelmaier <[log in to unmask]>

Tue, 27 Feb 2007 09:12:18 EST

32 lines

Re: APEX

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 27 Feb 2007 07:31:15 -0700

60 lines

Re: APEX

Edward Szpruch <[log in to unmask]>

Tue, 27 Feb 2007 16:56:25 +0200

87 lines

Re: APEX

Ahne Oosterhof <[log in to unmask]>

Tue, 27 Feb 2007 07:26:36 -0800

213 lines

New Thread

APEX (NTC for Friday)

Re: APEX (NTC for Friday)

Leland Woodall <[log in to unmask]>

Thu, 22 Feb 2007 23:36:32 -0500

66 lines

Re: APEX (NTC for Friday)

Joyce Koo <[log in to unmask]>

Fri, 23 Feb 2007 08:32:42 -0500

88 lines

Re: APEX (NTC for Friday)

Dave Seymour <[log in to unmask]>

Fri, 23 Feb 2007 09:24:25 -0500

131 lines

New Thread

APEX - NTC

Re: APEX - NTC

David D. Hillman <[log in to unmask]>

Mon, 26 Feb 2007 10:53:29 -0600

140 lines

Re: APEX - NTC

Bernard Kessler <[log in to unmask]>

Mon, 26 Feb 2007 09:13:56 -0800

163 lines

Re: APEX - NTC

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 26 Feb 2007 10:43:14 -0700

200 lines

Re: APEX - NTC

David D. Hillman <[log in to unmask]>

Mon, 26 Feb 2007 12:00:42 -0600

249 lines

New Thread

APEX NTC

Re: APEX NTC

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 08:44:58 -0600

74 lines

Re: APEX NTC

Werner Engelmaier <[log in to unmask]>

Tue, 27 Feb 2007 12:20:10 EST

31 lines

Re: APEX NTC

Dharma Kemp-Bresett <[log in to unmask]>

Tue, 27 Feb 2007 12:25:49 -0500

109 lines

Re: APEX NTC

ALLEN, LOA <[log in to unmask]>

Tue, 27 Feb 2007 09:28:27 -0800

58 lines

Re: APEX NTC

John Burke <[log in to unmask]>

Tue, 27 Feb 2007 10:12:12 -0800

108 lines

Re: APEX NTC

Bloomquist, Ken <[log in to unmask]>

Tue, 27 Feb 2007 12:54:49 -0800

51 lines

New Thread

Article in circuits assembly

Article in circuits assembly

John Burke <[log in to unmask]>

Fri, 2 Feb 2007 13:39:37 -0800

46 lines

New Thread

AS 9100

AS 9100

Robert Coburn <[log in to unmask]>

Fri, 9 Feb 2007 07:32:17 -0500

32 lines

New Thread

ASSY: PCI Express Connector

ASSY: PCI Express Connector

Phillip Bavaro <[log in to unmask]>

Mon, 5 Feb 2007 20:26:00 -0800

27 lines

Re: ASSY: PCI Express Connector

Scott Lefebvre <[log in to unmask]>

Tue, 6 Feb 2007 17:05:20 -0800

62 lines

New Thread

Baking Moisture sensitive devices that are on a real.

Baking Moisture sensitive devices that are on a real.

West, Jim <[log in to unmask]>

Wed, 21 Feb 2007 10:01:52 -0500

49 lines

Re: Baking Moisture sensitive devices that are on a real.

Genny Gibbard <[log in to unmask]>

Wed, 21 Feb 2007 09:18:31 -0600

76 lines

Re: Baking Moisture sensitive devices that are on a real.

Roberts, Jon <[log in to unmask]>

Wed, 21 Feb 2007 10:12:45 -0600

99 lines

Re: Baking Moisture sensitive devices that are on a real.

Ted Tontis <[log in to unmask]>

Wed, 21 Feb 2007 10:54:12 -0600

151 lines

New Thread

Baking Moisture sensitive devices that are on a reel.

Re: Baking Moisture sensitive devices that are on a reel.

West, Jim <[log in to unmask]>

Thu, 22 Feb 2007 10:47:08 -0500

210 lines

Re: Baking Moisture sensitive devices that are on a reel.

Ted Tontis <[log in to unmask]>

Thu, 22 Feb 2007 11:00:00 -0600

407 lines

New Thread

BGA ball current

BGA ball current

Madhusudhan Kulkarni <[log in to unmask]>

Thu, 15 Feb 2007 09:12:53 +0530

27 lines

Re: BGA ball current

Hernefjord Ingemar <[log in to unmask]>

Thu, 15 Feb 2007 08:17:25 +0100

84 lines

Re: BGA ball current

Madhusudhan Kulkarni <[log in to unmask]>

Thu, 15 Feb 2007 14:36:34 +0530

109 lines

New Thread

BGA Carrier pad nickel plating

BGA Carrier pad nickel plating

Victor G. Hernandez <[log in to unmask]>

Wed, 14 Feb 2007 13:08:13 -0600

28 lines

New Thread

BGA Preinspection Method...

BGA Preinspection Method...

Rodney Miller <[log in to unmask]>

Fri, 23 Feb 2007 14:58:23 -0600

47 lines

Re: BGA Preinspection Method...

Daniel Blass <[log in to unmask]>

Fri, 23 Feb 2007 15:01:35 -0600

31 lines

Re: BGA Preinspection Method...

Victor G. Hernandez <[log in to unmask]>

Fri, 23 Feb 2007 15:27:29 -0600

57 lines

Re: BGA Preinspection Method...

Hernefjord Ingemar <[log in to unmask]>

Tue, 27 Feb 2007 13:38:37 +0100

77 lines

Re: BGA Preinspection Method...

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 06:57:43 -0600

100 lines

Re: BGA Preinspection Method...

Hernefjord Ingemar <[log in to unmask]>

Tue, 27 Feb 2007 14:10:11 +0100

108 lines

New Thread

Bill Kasprzak is out of the office.

Bill Kasprzak is out of the office.

Bill Kasprzak <[log in to unmask]>

Mon, 19 Feb 2007 10:00:31 -0500

26 lines

New Thread

Cadstar to Expedition conversion

Cadstar to Expedition conversion

Mark Eckert <[log in to unmask]>

Tue, 27 Feb 2007 13:26:40 -0600

37 lines

New Thread

China / Solder Longevity

China / Solder Longevity

kwood716 <[log in to unmask]>

Thu, 22 Feb 2007 17:50:26 -0500

41 lines

Re: China / Solder Longevity

Mike Fenner <[log in to unmask]>

Fri, 23 Feb 2007 08:50:31 -0000

106 lines

New Thread

CIMBridge?

CIMBridge?

Royce Taylor <[log in to unmask]>

Wed, 28 Feb 2007 11:20:09 -0500

34 lines

Re: CIMBridge?

Ahne Oosterhof <[log in to unmask]>

Wed, 28 Feb 2007 16:08:14 -0800

73 lines

New Thread

Component Orientation Survey

Component Orientation Survey

Green, Mike <[log in to unmask]>

Wed, 28 Feb 2007 17:58:58 -0800

30 lines

New Thread

Conformal Coat masking tape and dots

Conformal Coat masking tape and dots

Craig Sullivan <[log in to unmask]>

Tue, 27 Feb 2007 10:39:50 -0600

43 lines

New Thread

Conformal coated Tantalum Cap - Placement issues?

Re: Conformal coated Tantalum Cap - Placement issues?

Hernefjord Ingemar <[log in to unmask]>

Mon, 5 Feb 2007 10:57:02 +0100

79 lines

New Thread

Conformal Coating Masking Requirements

Conformal Coating Masking Requirements

Kane, Amol (349) <[log in to unmask]>

Mon, 5 Feb 2007 09:06:45 -0500

274 lines

Re: Conformal Coating Masking Requirements

Graham Collins <[log in to unmask]>

Mon, 5 Feb 2007 09:22:21 -0500

341 lines

Re: Conformal Coating Masking Requirements

Hogg, Blair K. <[log in to unmask]>

Mon, 5 Feb 2007 09:27:55 -0500

85 lines

Re: Conformal Coating Masking Requirements

Dehoyos, Ramon <[log in to unmask]>

Mon, 5 Feb 2007 10:18:09 -0500

357 lines

Re: Conformal Coating Masking Requirements

Kane, Amol (349) <[log in to unmask]>

Thu, 8 Feb 2007 07:03:13 -0500

121 lines

New Thread

Copper balancing

Copper balancing

Tempea, Ioan <[log in to unmask]>

Fri, 23 Feb 2007 11:10:56 -0500

40 lines

Re: Copper balancing

Sherif Refaat <[log in to unmask]>

Sat, 24 Feb 2007 10:25:29 -0500

81 lines

New Thread

Costing of Components

Costing of Components

Phil Nutting <[log in to unmask]>

Mon, 5 Feb 2007 09:44:27 -0500

37 lines

Re: Costing of Components

David Douthit <[log in to unmask]>

Mon, 5 Feb 2007 12:26:11 -0700

66 lines

Re: Costing of Components

Phil Nutting <[log in to unmask]>

Mon, 5 Feb 2007 15:34:18 -0500

94 lines

Re: Costing of Components

Ryan Grant <[log in to unmask]>

Tue, 6 Feb 2007 11:19:49 -0700

103 lines

Re: Costing of Components

Craig Cullum <[log in to unmask]>

Tue, 6 Feb 2007 13:34:28 -0600

62 lines

New Thread

Delamination x-rays

Delamination x-rays

Tempea, Ioan <[log in to unmask]>

Tue, 27 Feb 2007 11:19:11 -0500

29 lines

New Thread

Differences - Similarities between J-STD-001 and IPC-A-610

Differences - Similarities between J-STD-001 and IPC-A-610

Dale Ritzen <[log in to unmask]>

Thu, 15 Feb 2007 07:07:03 -0600

36 lines

Re: Differences - Similarities between J-STD-001 and IPC-A-610

Bloomquist, Ken <[log in to unmask]>

Thu, 15 Feb 2007 05:51:59 -0800

65 lines

Re: Differences - Similarities between J-STD-001 and IPC-A-610

Mike Buetow <[log in to unmask]>

Thu, 15 Feb 2007 09:35:28 -0500

119 lines

Re: Differences - Similarities between J-STD-001 and IPC-A-610

Jack Crawford <[log in to unmask]>

Thu, 15 Feb 2007 16:56:23 -0600

145 lines

New Thread

Disconnections in transition zone in rigid-flex boards

Disconnections in transition zone in rigid-flex boards

Anna Seredovaya <[log in to unmask]>

Thu, 22 Feb 2007 13:55:25 +0200

36 lines

Re: Disconnections in transition zone in rigid-flex boards

Kevin Glidden <[log in to unmask]>

Thu, 22 Feb 2007 07:48:28 -0500

61 lines

Re: Disconnections in transition zone in rigid-flex boards

Stadem, Richard D. <[log in to unmask]>

Thu, 22 Feb 2007 07:08:03 -0600

64 lines

Re: Disconnections in transition zone in rigid-flex boards

Wayne Thayer <[log in to unmask]>

Thu, 22 Feb 2007 08:53:55 -0500

87 lines

Re: Disconnections in transition zone in rigid-flex boards

Dehoyos, Ramon <[log in to unmask]>

Thu, 22 Feb 2007 10:04:28 -0500

117 lines

Re: Disconnections in transition zone in rigid-flex boards

Ted Edwards <[log in to unmask]>

Thu, 22 Feb 2007 08:28:06 -0700

117 lines

Re: Disconnections in transition zone in rigid-flex boards

[log in to unmask]

Thu, 22 Feb 2007 12:24:01 EST

77 lines

Re: Disconnections in transition zone in rigid-flex boards

Steve Gregory <[log in to unmask]>

Thu, 22 Feb 2007 13:20:06 -0600

122 lines

Re: Disconnections in transition zone in rigid-flex boards

[log in to unmask]

Thu, 22 Feb 2007 15:19:08 EST

171 lines

Re: Disconnections in transition zone in rigid-flex boards

Chuck Brummer <[log in to unmask]>

Fri, 23 Feb 2007 15:37:54 -0800

173 lines

New Thread

Engineering Spec for Stencil 6 Mils, 7 Mils, 8 Mils.

Engineering Spec for Stencil 6 Mils, 7 Mils, 8 Mils.

Marsal Tampubolon <[log in to unmask]>

Tue, 27 Feb 2007 16:52:33 +0700

31 lines

New Thread

ESD Question

ESD Question

- Bogert <[log in to unmask]>

Sat, 3 Feb 2007 14:09:18 -0500

33 lines

Re: ESD Question

Hogg, Blair K. <[log in to unmask]>

Mon, 5 Feb 2007 09:18:31 -0500

82 lines

Re: ESD Question

Gene Felder <[log in to unmask]>

Mon, 5 Feb 2007 10:44:46 -0800

114 lines

New Thread

FOD for Thought

FOD for Thought

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 28 Feb 2007 07:15:16 -0700

107 lines

New Thread

FOD Prevention

FOD Prevention

Marsico, James <[log in to unmask]>

Wed, 28 Feb 2007 08:09:14 -0500

43 lines

Re: FOD Prevention

Steve Gregory <[log in to unmask]>

Wed, 28 Feb 2007 07:44:43 -0600

79 lines

Re: FOD Prevention

Bloomquist, Ken <[log in to unmask]>

Wed, 28 Feb 2007 05:50:14 -0800

77 lines

New Thread

FW: IPC-A-610D

FW: IPC-A-610D

Victor G. Hernandez <[log in to unmask]>

Mon, 12 Feb 2007 13:40:02 -0600

35 lines

New Thread

FW: January 2007 ESD Systems.com Newsletter

FW: January 2007 ESD Systems.com Newsletter

Dehoyos, Ramon <[log in to unmask]>

Thu, 1 Feb 2007 10:26:47 -0500

51 lines

Re: FW: January 2007 ESD Systems.com Newsletter

Dale Ritzen <[log in to unmask]>

Thu, 1 Feb 2007 09:48:49 -0600

91 lines

Re: FW: January 2007 ESD Systems.com Newsletter

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 1 Feb 2007 08:53:19 -0700

79 lines

Re: FW: January 2007 ESD Systems.com Newsletter

Joe Russeau <[log in to unmask]>

Thu, 1 Feb 2007 11:04:46 -0500

85 lines

Re: FW: January 2007 ESD Systems.com Newsletter

Stadem, Richard D. <[log in to unmask]>

Thu, 1 Feb 2007 10:44:05 -0600

116 lines

Re: FW: January 2007 ESD Systems.com Newsletter

Hogg, Blair K. <[log in to unmask]>

Thu, 1 Feb 2007 12:16:27 -0500

65 lines

New Thread

FW: Report from a BGA

FW: Report from a BGA

John Burke <[log in to unmask]>

Thu, 8 Feb 2007 12:11:58 -0800

35 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Thu, 8 Feb 2007 14:24:10 -0700

65 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Fri, 9 Feb 2007 08:42:49 +0100

100 lines

Re: FW: Report from a BGA

Upton, Shawn <[log in to unmask]>

Fri, 9 Feb 2007 07:53:02 -0500

84 lines

Re: FW: Report from a BGA

Dehoyos, Ramon <[log in to unmask]>

Fri, 9 Feb 2007 08:34:06 -0500

126 lines

Re: FW: Report from a BGA

Hogg, Blair K. <[log in to unmask]>

Fri, 9 Feb 2007 08:39:32 -0500

123 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Fri, 9 Feb 2007 14:29:17 EST

27 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Mon, 12 Feb 2007 08:33:25 +0100

46 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Mon, 12 Feb 2007 08:05:54 -0600

73 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Mon, 12 Feb 2007 16:06:39 +0100

392 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Mon, 12 Feb 2007 14:30:15 EST

37 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Mon, 12 Feb 2007 14:55:33 -0600

80 lines

Re: FW: Report from a BGA

Steve Gregory <[log in to unmask]>

Mon, 12 Feb 2007 15:09:10 -0600

96 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Mon, 12 Feb 2007 15:25:41 -0600

126 lines

Re: FW: Report from a BGA

Guy Ramsey <[log in to unmask]>

Mon, 12 Feb 2007 16:39:05 -0500

142 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Mon, 12 Feb 2007 17:51:05 EST

29 lines

Re: FW: Report from a BGA

John Burke <[log in to unmask]>

Mon, 12 Feb 2007 15:33:43 -0800

175 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Feb 2007 06:48:25 -0600

55 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 08:23:34 EST

31 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Feb 2007 07:32:57 -0600

57 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Tue, 13 Feb 2007 14:46:54 +0100

61 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 06:54:02 -0700

84 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 07:00:35 -0700

251 lines

Re: FW: Report from a BGA

Graham Naisbitt <[log in to unmask]>

Tue, 13 Feb 2007 14:39:20 +0000

270 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Tue, 13 Feb 2007 15:46:05 +0100

263 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Feb 2007 08:52:00 -0600

248 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 10:19:17 EST

34 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 10:21:40 EST

27 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 10:28:33 EST

37 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 10:29:52 EST

25 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 08:38:55 -0700

53 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 08:44:23 -0700

58 lines

Re: FW: Report from a BGA

Stadem, Richard D. <[log in to unmask]>

Tue, 13 Feb 2007 09:51:51 -0600

53 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 11:07:01 EST

26 lines

Re: FW: Report from a BGA

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 09:20:40 -0700

80 lines

Re: FW: Report from a BGA

Graham Naisbitt <[log in to unmask]>

Tue, 13 Feb 2007 16:57:51 +0000

59 lines

Re: FW: Report from a BGA

Werner Engelmaier <[log in to unmask]>

Tue, 13 Feb 2007 12:01:46 EST

28 lines

Re: FW: Report from a BGA

Hernefjord Ingemar <[log in to unmask]>

Wed, 14 Feb 2007 08:23:39 +0100

276 lines

New Thread

FW: Report from a BGA NTC

Re: FW: Report from a BGA NTC

Bev Christian <[log in to unmask]>

Tue, 13 Feb 2007 10:23:17 -0500

70 lines

Re: FW: Report from a BGA NTC

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 13 Feb 2007 08:35:17 -0700

99 lines

New Thread

FW: [SMART] NPL Studio Project

FW: [SMART] NPL Studio Project

John Burke <[log in to unmask]>

Fri, 9 Feb 2007 07:49:53 -0800

96 lines

New Thread

FW: [TN] FW: January 2007 ESD Systems.com Newsletter

FW: [TN] FW: January 2007 ESD Systems.com Newsletter

Dehoyos, Ramon <[log in to unmask]>

Thu, 1 Feb 2007 15:46:38 -0500

138 lines

New Thread

FW: [TN] Humiseal Masking Tape Residues/latex peelable

FW: [TN] Humiseal Masking Tape Residues/latex peelable

Dehoyos, Ramon <[log in to unmask]>

Mon, 5 Feb 2007 14:29:44 -0500

204 lines

New Thread

Gold Finger Contact Pad omission

Gold Finger Contact Pad omission

Victor G. Hernandez <[log in to unmask]>

Thu, 1 Feb 2007 10:33:04 -0600

30 lines

Re: Gold Finger Contact Pad omission

Wayne Thayer <[log in to unmask]>

Thu, 1 Feb 2007 12:11:20 -0500

72 lines

Re: Gold Finger Contact Pad omission

Victor G. Hernandez <[log in to unmask]>

Thu, 1 Feb 2007 11:28:04 -0600

94 lines

Re: Gold Finger Contact Pad omission

Wayne Thayer <[log in to unmask]>

Thu, 1 Feb 2007 13:13:26 -0500

131 lines

New Thread

Henry Rekers is out of the office.

Henry Rekers is out of the office.

[log in to unmask]

Sat, 17 Feb 2007 04:01:19 PST

23 lines

New Thread

Hot solder dip to mitigate Sn whiskers

Hot solder dip to mitigate Sn whiskers

Robert Coburn <[log in to unmask]>

Wed, 7 Feb 2007 08:44:49 -0500

40 lines

Re: Hot solder dip to mitigate Sn whiskers

Marsico, James <[log in to unmask]>

Wed, 7 Feb 2007 09:00:47 -0500

79 lines

New Thread

Humiseal Masking Tape Residues...

Humiseal Masking Tape Residues...

Steve Gregory <[log in to unmask]>

Fri, 2 Feb 2007 11:30:33 -0600

43 lines

Re: Humiseal Masking Tape Residues...

Douglas O. Pauls <[log in to unmask]>

Fri, 2 Feb 2007 11:47:23 -0600

97 lines

Re: Humiseal Masking Tape Residues...

Kane, Amol (349) <[log in to unmask]>

Fri, 2 Feb 2007 14:50:19 -0500

169 lines

New Thread

Humiseal Masking Tape Residues/latex peelable

Re: Humiseal Masking Tape Residues/latex peelable

Barmuta, Michael <[log in to unmask]>

Fri, 2 Feb 2007 10:33:58 -0800

108 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Gregory <[log in to unmask]>

Fri, 2 Feb 2007 14:18:31 -0600

156 lines

Re: Humiseal Masking Tape Residues/latex peelable

Barmuta, Michael <[log in to unmask]>

Fri, 2 Feb 2007 15:26:44 -0800

215 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Mikell <[log in to unmask]>

Mon, 5 Feb 2007 03:11:11 -0400

112 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Gregory <[log in to unmask]>

Mon, 5 Feb 2007 07:58:31 -0600

159 lines

Re: Humiseal Masking Tape Residues/latex peelable

Dehoyos, Ramon <[log in to unmask]>

Mon, 5 Feb 2007 09:15:22 -0500

193 lines

Re: Humiseal Masking Tape Residues/latex peelable

Bloomquist, Ken <[log in to unmask]>

Mon, 5 Feb 2007 06:40:41 -0800

62 lines

Re: Humiseal Masking Tape Residues/latex peelable

Guy Ramsey <[log in to unmask]>

Mon, 5 Feb 2007 12:00:21 -0500

58 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Gregory <[log in to unmask]>

Mon, 5 Feb 2007 11:05:55 -0600

87 lines

Re: Humiseal Masking Tape Residues/latex peelable

Graham Collins <[log in to unmask]>

Mon, 5 Feb 2007 12:20:25 -0500

96 lines

Re: Humiseal Masking Tape Residues/latex peelable

Bloomquist, Ken <[log in to unmask]>

Mon, 5 Feb 2007 09:48:57 -0800

60 lines

Re: Humiseal Masking Tape Residues/latex peelable

Stadem, Richard D. <[log in to unmask]>

Mon, 5 Feb 2007 11:54:41 -0600

85 lines

Re: Humiseal Masking Tape Residues/latex peelable

Graham Collins <[log in to unmask]>

Mon, 5 Feb 2007 13:53:19 -0500

138 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Gregory <[log in to unmask]>

Mon, 5 Feb 2007 13:34:17 -0600

114 lines

Re: Humiseal Masking Tape Residues/latex peelable

Graham Collins <[log in to unmask]>

Tue, 6 Feb 2007 07:27:09 -0500

167 lines

Re: Humiseal Masking Tape Residues/latex peelable

Steve Gregory <[log in to unmask]>

Tue, 6 Feb 2007 07:15:12 -0600

191 lines

Re: Humiseal Masking Tape Residues/latex peelable

Bloomquist, Ken <[log in to unmask]>

Tue, 6 Feb 2007 06:19:44 -0800

81 lines

Re: Humiseal Masking Tape Residues/latex peelable

Graham Collins <[log in to unmask]>

Tue, 6 Feb 2007 09:26:18 -0500

115 lines

Re: Humiseal Masking Tape Residues/latex peelable

Hogg, Blair K. <[log in to unmask]>

Tue, 6 Feb 2007 10:42:52 -0500

101 lines

Re: Humiseal Masking Tape Residues/latex peelable

Dehoyos, Ramon <[log in to unmask]>

Tue, 6 Feb 2007 12:03:00 -0500

125 lines

Re: Humiseal Masking Tape Residues/latex peelable

Dehoyos, Ramon <[log in to unmask]>

Tue, 6 Feb 2007 12:34:35 -0500

175 lines

Re: Humiseal Masking Tape Residues/latex peelable

Joyce Koo <[log in to unmask]>

Tue, 6 Feb 2007 12:10:53 -0500

155 lines

Re: Humiseal Masking Tape Residues/latex peelable

Phillip Bavaro <[log in to unmask]>

Tue, 6 Feb 2007 11:11:20 -0800

146 lines

New Thread

I'll be late Friday

I'll be late Friday

Jack Crawford <[log in to unmask]>

Thu, 8 Feb 2007 16:59:16 -0600

33 lines

New Thread

Immersion silver handling

Immersion silver handling

Craig Sullivan <[log in to unmask]>

Thu, 22 Feb 2007 09:25:15 -0600

47 lines

Re: Immersion silver handling

John Burke <[log in to unmask]>

Thu, 22 Feb 2007 09:09:54 -0800

84 lines

Re: Immersion silver handling

Stadem, Richard D. <[log in to unmask]>

Thu, 22 Feb 2007 11:17:16 -0600

71 lines

Re: Immersion silver handling

Upton, Shawn <[log in to unmask]>

Thu, 22 Feb 2007 12:45:16 -0500

51 lines

Re: Immersion silver handling

Dehoyos, Ramon <[log in to unmask]>

Thu, 22 Feb 2007 13:34:55 -0500

81 lines

Re: Immersion silver handling

Karl Hunsinger <[log in to unmask]>

Thu, 22 Feb 2007 15:08:04 -0500

32 lines

Re: Immersion silver handling

Stadem, Richard D. <[log in to unmask]>

Thu, 22 Feb 2007 14:46:00 -0600

80 lines

Re: Immersion silver handling

Karl Hunsinger <[log in to unmask]>

Fri, 23 Feb 2007 08:24:16 -0500

126 lines

Re: Immersion silver handling

Karl Hunsinger <[log in to unmask]>

Fri, 23 Feb 2007 08:26:25 -0500

136 lines

Re: Immersion silver handling

Ian Hanna <[log in to unmask]>

Fri, 23 Feb 2007 09:45:49 -0500

164 lines

Re: Immersion silver handling

Stadem, Richard D. <[log in to unmask]>

Fri, 23 Feb 2007 12:36:45 -0600

176 lines

Re: Immersion silver handling

Ian Hanna <[log in to unmask]>

Fri, 23 Feb 2007 13:57:11 -0500

202 lines

New Thread

IPC announces Design for Manufacture workshop in Leeds, UK

IPC announces Design for Manufacture workshop in Leeds, UK

Tina Nerad <[log in to unmask]>

Wed, 14 Feb 2007 15:07:13 -0600

62 lines

New Thread

IPC webcast series on RoHS Compliance Medical Monitoring & Control Equipment

IPC webcast series on RoHS Compliance Medical Monitoring & Control Equipment

Tina Nerad <[log in to unmask]>

Mon, 12 Feb 2007 16:16:10 -0600

48 lines

New Thread

IPC Webcast: Outsourcing: The Importance of Supply Chain Coordination - 4/4/07

IPC Webcast: Outsourcing: The Importance of Supply Chain Coordination - 4/4/07

Tina Nerad <[log in to unmask]>

Thu, 1 Feb 2007 15:21:09 -0600

37 lines

New Thread

IPC workshops on Lead Free Issues - April, 2007, in Bannockburn, IL

IPC workshops on Lead Free Issues - April, 2007, in Bannockburn, IL

Tina Nerad <[log in to unmask]>

Tue, 13 Feb 2007 11:09:28 -0600

116 lines

New Thread

IPC'S Compliant Electronics for EU Applications - 3/13-14/07 - Dallas, TX & 3/22-23/07 - San Jose, CA

IPC'S Compliant Electronics for EU Applications - 3/13-14/07 - Dallas, TX & 3/22-23/07 - San Jose, CA

Tina Nerad <[log in to unmask]>

Thu, 15 Feb 2007 11:50:34 -0600

46 lines

New Thread

IPC's Compliant Electronics for EU Applications - March 13-14, 2007 in Dallas, TX

IPC's Compliant Electronics for EU Applications - March 13-14, 2007 in Dallas, TX

Tina Nerad <[log in to unmask]>

Thu, 22 Feb 2007 11:41:38 -0600

42 lines

New Thread

IPC/JEDEC Lead Free Reliability & Reliability Testing for RoHS LF Electronics Conference, 4/10-12/07 in Boston, MA

IPC/JEDEC Lead Free Reliability & Reliability Testing for RoHS LF Electronics Conference, 4/10-12/07 in Boston, MA

Tina Nerad <[log in to unmask]>

Tue, 20 Feb 2007 08:03:45 -0600

41 lines

New Thread

IPC/Soldertec Global International Conference on LF Reliability - San Sebastian, Spain

IPC/Soldertec Global International Conference on LF Reliability - San Sebastian, Spain

Tina Nerad <[log in to unmask]>

Wed, 14 Feb 2007 10:51:15 -0600

52 lines

New Thread

Kester 197 RMA Flux...anybody have some?

Kester 197 RMA Flux...anybody have some?

Steve Gregory <[log in to unmask]>

Thu, 8 Feb 2007 13:56:34 -0600

34 lines

Re: Kester 197 RMA Flux...anybody have some?

David D. Hillman <[log in to unmask]>

Thu, 8 Feb 2007 14:06:20 -0600

87 lines

Re: Kester 197 RMA Flux...anybody have some?

Bill Kasprzak <[log in to unmask]>

Thu, 8 Feb 2007 15:35:30 -0500

25 lines

Re: Kester 197 RMA Flux...anybody have some?

Bloomquist, Ken <[log in to unmask]>

Thu, 8 Feb 2007 14:10:38 -0800

55 lines

Re: Kester 197 RMA Flux...anybody have some?

John Burke <[log in to unmask]>

Thu, 8 Feb 2007 14:37:00 -0800

88 lines

Re: Kester 197 RMA Flux...anybody have some?

Bloomquist, Ken <[log in to unmask]>

Thu, 8 Feb 2007 14:59:29 -0800

123 lines

New Thread

Korea's version of the RoHS, ELV and WEEE Directives

Korea's version of the RoHS, ELV and WEEE Directives

John Burke <[log in to unmask]>

Mon, 26 Feb 2007 10:39:00 -0800

86 lines

New Thread

Large PWB Supplier

Large PWB Supplier

Marsico, James <[log in to unmask]>

Fri, 2 Feb 2007 09:52:07 -0500

54 lines

Re: Large PWB Supplier

Nilesh Patel <[log in to unmask]>

Fri, 2 Feb 2007 10:04:16 -0500

77 lines

New Thread

Latex Peelable Soldermask

Latex Peelable Soldermask

Bloomquist, Ken <[log in to unmask]>

Fri, 2 Feb 2007 09:05:54 -0800

35 lines

Re: Latex Peelable Soldermask

Phil Nutting <[log in to unmask]>

Fri, 2 Feb 2007 12:51:11 -0500

64 lines

Re: Latex Peelable Soldermask

- Bogert <[log in to unmask]>

Sat, 3 Feb 2007 13:56:45 -0500

98 lines

Re: Latex Peelable Soldermask

Brian Ellis <[log in to unmask]>

Sun, 4 Feb 2007 10:51:26 +0200

52 lines

Re: Latex Peelable Soldermask

Dehoyos, Ramon <[log in to unmask]>

Mon, 5 Feb 2007 14:15:45 -0500

131 lines

New Thread

leaching of solder joints

leaching of solder joints

Wood, Kenneth <[log in to unmask]>

Mon, 26 Feb 2007 07:23:48 -0500

55 lines

Re: leaching of solder joints

Werner Engelmaier <[log in to unmask]>

Mon, 26 Feb 2007 09:09:06 EST

46 lines

New Thread

Lead Free Reliability and Test Conference - Register TODAY

Lead Free Reliability and Test Conference - Register TODAY

Alexandra Curtis <[log in to unmask]>

Wed, 7 Feb 2007 08:12:23 -0600

46 lines

New Thread

Lead Protrusion

Lead Protrusion

Bremer, Gary <[log in to unmask]>

Wed, 21 Feb 2007 07:51:34 -0800

67 lines

Re: Lead Protrusion

Kevin Glidden <[log in to unmask]>

Wed, 21 Feb 2007 11:33:28 -0500

104 lines

Re: Lead Protrusion

Wayne Thayer <[log in to unmask]>

Wed, 21 Feb 2007 12:05:41 -0500

119 lines

Re: Lead Protrusion

Dave Seymour <[log in to unmask]>

Wed, 21 Feb 2007 13:26:00 -0500

121 lines

Re: Lead Protrusion

Steve Gregory <[log in to unmask]>

Thu, 22 Feb 2007 07:16:59 -0600

103 lines

Re: Lead Protrusion

Dehoyos, Ramon <[log in to unmask]>

Thu, 22 Feb 2007 08:30:35 -0500

128 lines

New Thread

LF BGA in Leaded Solder Process

LF BGA in Leaded Solder Process

Ray, Carl (GE Indust, GE Fanuc) <[log in to unmask]>

Mon, 12 Feb 2007 14:52:19 -0500

32 lines

New Thread

LPI soldermask resolution

LPI soldermask resolution

Steve Gregory <[log in to unmask]>

Mon, 12 Feb 2007 11:11:14 -0600

30 lines

Re: LPI soldermask resolution

Lee parker <[log in to unmask]>

Mon, 12 Feb 2007 12:16:41 -0500

64 lines

Re: LPI soldermask resolution

David Greig <[log in to unmask]>

Mon, 12 Feb 2007 17:33:24 -0000

70 lines

Re: LPI soldermask resolution

Lee parker <[log in to unmask]>

Mon, 12 Feb 2007 12:41:37 -0500

119 lines

Re: LPI soldermask resolution

Barmuta, Michael <[log in to unmask]>

Mon, 12 Feb 2007 10:02:07 -0800

87 lines

Re: LPI soldermask resolution

Seth Goodman <[log in to unmask]>

Thu, 15 Feb 2007 12:03:10 -0600

40 lines

Re: LPI soldermask resolution

Phillip Bavaro <[log in to unmask]>

Thu, 15 Feb 2007 16:45:19 -0800

67 lines

Re: LPI soldermask resolution

David Greig <[log in to unmask]>

Fri, 16 Feb 2007 15:16:55 -0000

103 lines

Re: LPI soldermask resolution

Steve Gregory <[log in to unmask]>

Fri, 16 Feb 2007 09:36:34 -0600

149 lines

Re: LPI soldermask resolution

Lee parker <[log in to unmask]>

Fri, 16 Feb 2007 10:56:45 -0500

187 lines

Re: LPI soldermask resolution

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 16 Feb 2007 09:03:26 -0700

221 lines

Re: LPI soldermask resolution

David Greig <[log in to unmask]>

Fri, 16 Feb 2007 16:24:04 -0000

178 lines

Re: LPI soldermask resolution

Stadem, Richard D. <[log in to unmask]>

Fri, 16 Feb 2007 12:17:20 -0600

246 lines

New Thread

Max Humidity allowed

Max Humidity allowed

Sklenar Vit (RBAU-AE/MFE3) <[log in to unmask]>

Wed, 7 Feb 2007 12:18:33 +1100

40 lines

Re: Max Humidity allowed

Brian Ellis <[log in to unmask]>

Wed, 7 Feb 2007 09:58:10 +0200

57 lines

Re: Max Humidity allowed

Guy Ramsey <[log in to unmask]>

Wed, 7 Feb 2007 06:59:34 -0500

72 lines

Re: Max Humidity allowed

Dehoyos, Ramon <[log in to unmask]>

Wed, 7 Feb 2007 10:18:54 -0500

112 lines

Re: Max Humidity allowed

P. Langeveld <[log in to unmask]>

Wed, 7 Feb 2007 19:16:49 +0100

142 lines

Re: Max Humidity allowed

Stadem, Richard D. <[log in to unmask]>

Wed, 7 Feb 2007 13:06:56 -0600

221 lines

New Thread

Maximum Au lead plating thickness

Re: Maximum Au lead plating thickness

Mike Fenner <[log in to unmask]>

Thu, 1 Feb 2007 10:02:51 -0000

116 lines

Re: Maximum Au lead plating thickness

Hernefjord Ingemar <[log in to unmask]>

Mon, 5 Feb 2007 08:59:48 +0100

169 lines

New Thread

Mechanical Stress on solder joints

Mechanical Stress on solder joints

Bremer, Gary <[log in to unmask]>

Thu, 1 Feb 2007 08:02:27 -0800

64 lines

Re: Mechanical Stress on solder joints

Wenger, George M. <[log in to unmask]>

Thu, 1 Feb 2007 11:21:03 -0500

74 lines

Re: Mechanical Stress on solder joints

Steve Gregory <[log in to unmask]>

Thu, 1 Feb 2007 11:34:53 -0600

97 lines

Re: Mechanical Stress on solder joints

Victor G. Hernandez <[log in to unmask]>

Thu, 1 Feb 2007 11:50:01 -0600

128 lines

Re: Mechanical Stress on solder joints

Bremer, Gary <[log in to unmask]>

Thu, 1 Feb 2007 12:51:03 -0800

137 lines

Re: Mechanical Stress on solder joints

Wayne Thayer <[log in to unmask]>

Thu, 1 Feb 2007 16:35:01 -0500

178 lines

Re: Mechanical Stress on solder joints

Dehoyos, Ramon <[log in to unmask]>

Fri, 2 Feb 2007 08:41:49 -0500

193 lines

Re: Mechanical Stress on solder joints

Steve Gregory <[log in to unmask]>

Fri, 2 Feb 2007 08:06:29 -0600

159 lines

Re: Mechanical Stress on solder joints

Fazioli, Dan (ACLE) <[log in to unmask]>

Fri, 2 Feb 2007 07:32:34 -0700

250 lines

Re: Mechanical Stress on solder joints

Hernefjord Ingemar <[log in to unmask]>

Mon, 5 Feb 2007 11:07:58 +0100

97 lines

Re: Mechanical Stress on solder joints

Dehoyos, Ramon <[log in to unmask]>

Wed, 7 Feb 2007 11:04:36 -0500

186 lines

New Thread

MSD allowable time out of MBB before bake out is required

MSD allowable time out of MBB before bake out is required

Macko, Joe @ IEC <[log in to unmask]>

Wed, 21 Feb 2007 18:36:42 -0800

39 lines

New Thread

need help with cracking vias

need help with cracking vias

John Foster <[log in to unmask]>

Sat, 24 Feb 2007 10:42:57 -0800

55 lines

Re: need help with cracking vias

Joe Fjelstad <[log in to unmask]>

Sat, 24 Feb 2007 14:22:26 EST

46 lines

Re: need help with cracking vias

Haynes, Kim <[log in to unmask]>

Sat, 24 Feb 2007 16:22:17 -0600

113 lines

Re: need help with cracking vias

Werner Engelmaier <[log in to unmask]>

Sat, 24 Feb 2007 17:55:41 EST

54 lines

Re: need help with cracking vias

Paul Reid <[log in to unmask]>

Sun, 25 Feb 2007 11:27:47 -0500

157 lines

Re: need help with cracking vias

Wayne Thayer <[log in to unmask]>

Sun, 25 Feb 2007 18:53:12 -0500

174 lines

Re: need help with cracking vias

Paul Reid <[log in to unmask]>

Mon, 26 Feb 2007 11:34:09 -0500

177 lines

Re: need help with cracking vias

Dwight Mattix <[log in to unmask]>

Mon, 26 Feb 2007 08:51:25 -0800

268 lines

Re: need help with cracking vias

Paul O' Connor <[log in to unmask]>

Tue, 27 Feb 2007 02:32:24 -0600

37 lines

Re: need help with cracking vias

Victor G. Hernandez <[log in to unmask]>

Tue, 27 Feb 2007 08:54:35 -0600

66 lines

Re: need help with cracking vias

John Foster <[log in to unmask]>

Tue, 27 Feb 2007 10:29:19 -0800

83 lines

Re: need help with cracking vias

Susan Hott <[log in to unmask]>

Tue, 27 Feb 2007 13:32:41 -0500

147 lines

Re: need help with cracking vias

Werner Engelmaier <[log in to unmask]>

Tue, 27 Feb 2007 13:59:35 EST

58 lines

New Thread

NTC - APEX / IPC Show - Lost Ring - need help

NTC - APEX / IPC Show - Lost Ring - need help

Michael Kuczynski <[log in to unmask]>

Mon, 26 Feb 2007 15:01:46 -0500

44 lines

New Thread

Number of allowed X-outs?

Number of allowed X-outs?

Rick Thompson <[log in to unmask]>

Tue, 27 Feb 2007 13:15:46 -0800

40 lines

New Thread

OSP surface finish for lead free wave slodering process

OSP surface finish for lead free wave slodering process

Lin Leo <[log in to unmask]>

Fri, 2 Feb 2007 17:43:02 +0800

40 lines

Re: OSP surface finish for lead free wave slodering process

Tan, Geok Ang <[log in to unmask]>

Fri, 2 Feb 2007 18:11:47 +0800

69 lines

Re: OSP surface finish for lead free wave slodering process

Werner Engelmaier <[log in to unmask]>

Fri, 2 Feb 2007 08:19:27 EST

33 lines

Re: OSP surface finish for lead free wave slodering process

Joyce Koo <[log in to unmask]>

Fri, 2 Feb 2007 08:51:57 -0500

60 lines

Re: OSP surface finish for lead free wave slodering process

Werner Engelmaier <[log in to unmask]>

Fri, 2 Feb 2007 08:56:12 EST

28 lines

New Thread

PCB baking

PCB baking

Anna Seredovaya <[log in to unmask]>

Wed, 21 Feb 2007 09:16:41 +0200

40 lines

New Thread

Plasma Surface Treatment For Conformal Coat

Plasma Surface Treatment For Conformal Coat

Kane, Joseph E (US SSA) <[log in to unmask]>

Tue, 6 Feb 2007 11:22:55 -0500

34 lines

Re: Plasma Surface Treatment For Conformal Coat

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 6 Feb 2007 13:58:31 -0500

62 lines

Re: Plasma Surface Treatment For Conformal Coat

Creswick, Steven <[log in to unmask]>

Tue, 6 Feb 2007 14:37:03 -0500

113 lines

Re: Plasma Surface Treatment For Conformal Coat

Hernefjord Ingemar <[log in to unmask]>

Thu, 8 Feb 2007 08:25:00 +0100

156 lines

New Thread

Prediction comes true

Prediction comes true

Ed Popielarski <[log in to unmask]>

Wed, 28 Feb 2007 10:24:50 -0800

61 lines

Re: Prediction comes true

Dehoyos, Ramon <[log in to unmask]>

Wed, 28 Feb 2007 13:33:30 -0500

94 lines

Re: Prediction comes true

Kevin Glidden <[log in to unmask]>

Wed, 28 Feb 2007 13:37:42 -0500

110 lines

Re: Prediction comes true

Ed Popielarski <[log in to unmask]>

Wed, 28 Feb 2007 10:42:33 -0800

119 lines

Re: Prediction comes true

Phil Nutting <[log in to unmask]>

Wed, 28 Feb 2007 14:11:24 -0500

119 lines

Re: Prediction comes true

Ian Hanna <[log in to unmask]>

Wed, 28 Feb 2007 14:19:11 -0500

140 lines

Re: Prediction comes true

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 28 Feb 2007 12:16:03 -0700

147 lines

New Thread

Prediction comes true (NTC)

Re: Prediction comes true (NTC)

Barmuta, Michael <[log in to unmask]>

Wed, 28 Feb 2007 11:29:00 -0800

115 lines

Re: Prediction comes true (NTC)

Ed Popielarski <[log in to unmask]>

Wed, 28 Feb 2007 11:42:48 -0800

138 lines

Re: Prediction comes true (NTC)

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Wed, 28 Feb 2007 12:47:29 -0700

167 lines

Re: Prediction comes true (NTC)

Joe Fjelstad <[log in to unmask]>

Wed, 28 Feb 2007 16:07:44 EST

31 lines

New Thread

Preforms Adhesives

Preforms Adhesives

Dehoyos, Ramon <[log in to unmask]>

Tue, 20 Feb 2007 12:02:00 -0500

32 lines

Re: Preforms Adhesives

Colin McVean <[log in to unmask]>

Tue, 20 Feb 2007 17:25:32 -0000

81 lines

Re: Preforms Adhesives

Creswick, Steven <[log in to unmask]>

Tue, 20 Feb 2007 12:32:49 -0500

96 lines

Re: Preforms Adhesives

Stadem, Richard D. <[log in to unmask]>

Tue, 20 Feb 2007 13:24:14 -0600

75 lines

New Thread

PWB panels

PWB panels

Marsico, James <[log in to unmask]>

Mon, 19 Feb 2007 14:07:38 -0500

43 lines

Re: PWB panels

Wayne Thayer <[log in to unmask]>

Mon, 19 Feb 2007 14:17:15 -0500

70 lines

Re: PWB panels

Kevin Glidden <[log in to unmask]>

Mon, 19 Feb 2007 14:20:20 -0500

73 lines

Re: PWB panels

Steve Gregory <[log in to unmask]>

Mon, 19 Feb 2007 13:48:09 -0600

77 lines

Re: PWB panels

Tempea, Ioan <[log in to unmask]>

Mon, 19 Feb 2007 14:59:28 -0500

92 lines

Re: PWB panels

Stadem, Richard D. <[log in to unmask]>

Mon, 19 Feb 2007 14:11:11 -0600

82 lines

Re: PWB panels

Phillip Bavaro <[log in to unmask]>

Mon, 19 Feb 2007 12:42:37 -0800

81 lines

Re: PWB panels

Marsico, James <[log in to unmask]>

Mon, 19 Feb 2007 15:51:13 -0500

131 lines

Re: PWB panels

Stadem, Richard D. <[log in to unmask]>

Mon, 19 Feb 2007 14:55:40 -0600

122 lines

Re: PWB panels

Tempea, Ioan <[log in to unmask]>

Mon, 19 Feb 2007 16:21:32 -0500

130 lines

New Thread

REAL TIME STRESS STRAIN MEASUREMENT

REAL TIME STRESS STRAIN MEASUREMENT

al shirazi <[log in to unmask]>

Tue, 20 Feb 2007 08:32:45 -0800

37 lines

New Thread

Really big oops...

Really big oops...

Jack Crawford <[log in to unmask]>

Thu, 8 Feb 2007 17:33:32 -0600

32 lines

Re: Really big oops...

Hernefjord Ingemar <[log in to unmask]>

Fri, 9 Feb 2007 08:45:24 +0100

55 lines

Re: Really big oops...

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 9 Feb 2007 09:28:06 -0700

61 lines

Re: Really big oops...

Brian Ellis <[log in to unmask]>

Fri, 9 Feb 2007 18:57:17 +0200

50 lines

New Thread

Register Now For Compliant Electronics for EU Applications Workshop!

Register Now For Compliant Electronics for EU Applications Workshop!

Michelle Michelotti <[log in to unmask]>

Tue, 6 Feb 2007 09:51:15 -0600

66 lines

New Thread

Register now for IPC Designing & Building a Board w/Embedded Passive Components - April 24-25, 2007 - Crane, IN

Register now for IPC Designing & Building a Board w/Embedded Passive Components - April 24-25, 2007 - Crane, IN

Tina Nerad <[log in to unmask]>

Mon, 19 Feb 2007 09:00:34 -0600

50 lines

New Thread

Register now for IPC's workshops in Bannockburn, IL

Register now for IPC's workshops in Bannockburn, IL

Tina Nerad <[log in to unmask]>

Tue, 27 Feb 2007 15:07:52 -0600

109 lines

New Thread

Register today for RoHS Compliance Medical Monitoring & Control Equipment Webcast Series

Register today for RoHS Compliance Medical Monitoring & Control Equipment Webcast Series

Michelle Michelotti <[log in to unmask]>

Mon, 5 Feb 2007 14:38:23 -0600

86 lines

New Thread

Report From a BGA-Part 2 now available

Report From a BGA-Part 2 now available

Genny Gibbard <[log in to unmask]>

Tue, 13 Feb 2007 09:25:12 -0600

22 lines

New Thread

RoHs exemption record

RoHs exemption record

don_well <[log in to unmask]>

Mon, 26 Feb 2007 13:05:59 +0800

16 lines

Re: RoHs exemption record

Bev Christian <[log in to unmask]>

Mon, 26 Feb 2007 07:30:26 -0500

64 lines

New Thread

Safety in PCB processing

Safety in PCB processing

Len Kurup <[log in to unmask]>

Mon, 12 Feb 2007 22:43:18 -0600

26 lines

New Thread

SI recommendation

SI recommendation

Joyce Koo <[log in to unmask]>

Wed, 14 Feb 2007 11:31:53 -0500

31 lines

Re: SI recommendation

Lee parker <[log in to unmask]>

Wed, 14 Feb 2007 13:13:16 -0500

72 lines

New Thread

Solder Ball Stick beneath of the chip resistor/ capacitor.

Solder Ball Stick beneath of the chip resistor/ capacitor.

Marsal Tampubolon <[log in to unmask]>

Tue, 27 Feb 2007 16:59:12 +0700

36 lines

Re: Solder Ball Stick beneath of the chip resistor/ capacitor.

Bev Christian <[log in to unmask]>

Tue, 27 Feb 2007 07:41:17 -0500

91 lines

Re: Solder Ball Stick beneath of the chip resistor/ capacitor.

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 06:53:35 -0600

73 lines

New Thread

Soldering to Pt/Ag component terminations.

Re: Soldering to Pt/Ag component terminations.

Mike Fenner <[log in to unmask]>

Thu, 1 Feb 2007 10:14:18 -0000

158 lines

New Thread

Soldering to Pt/Ag terminations

Soldering to Pt/Ag terminations

Peter Barton <[log in to unmask]>

Thu, 1 Feb 2007 09:05:00 +0000

63 lines

Re: Soldering to Pt/Ag terminations

David D. Hillman <[log in to unmask]>

Thu, 1 Feb 2007 07:31:16 -0600

130 lines

Re: Soldering to Pt/Ag terminations

Wenger, George M. <[log in to unmask]>

Thu, 1 Feb 2007 08:49:39 -0500

117 lines

Re: Soldering to Pt/Ag terminations

Douglas O. Pauls <[log in to unmask]>

Thu, 1 Feb 2007 09:42:01 -0600

30 lines

Re: Soldering to Pt/Ag terminations

Stadem, Richard D. <[log in to unmask]>

Thu, 1 Feb 2007 09:51:50 -0600

54 lines

Re: Soldering to Pt/Ag terminations

Chris Ball <[log in to unmask]>

Thu, 1 Feb 2007 10:53:27 -0500

80 lines

Re: Soldering to Pt/Ag terminations

Werner Engelmaier <[log in to unmask]>

Thu, 1 Feb 2007 11:36:30 EST

26 lines

Re: Soldering to Pt/Ag terminations

John Burke <[log in to unmask]>

Thu, 1 Feb 2007 08:02:16 -0800

59 lines

New Thread

Spacing Requirement for Adjacent PFP pads carrying 70V

Re: Spacing Requirement for Adjacent PFP pads carrying 70V

Smith, Richard <[log in to unmask]>

Fri, 2 Feb 2007 11:50:41 -0500

127 lines

Re: Spacing Requirement for Adjacent PFP pads carrying 70V

Ahne Oosterhof <[log in to unmask]>

Tue, 6 Feb 2007 08:28:51 -0800

130 lines

Re: Spacing Requirement for Adjacent PFP pads carrying 70V

Stadem, Richard D. <[log in to unmask]>

Tue, 6 Feb 2007 10:33:36 -0600

160 lines

New Thread

stencil apertures

stencil apertures

Gabriela Bogdan <[log in to unmask]>

Thu, 15 Feb 2007 18:19:10 +0300

28 lines

Re: stencil apertures

Nowland, Russell Howard (Russell) <[log in to unmask]>

Thu, 15 Feb 2007 09:35:55 -0600

80 lines

Re: stencil apertures

Bill Coleman <[log in to unmask]>

Thu, 15 Feb 2007 09:46:56 -0700

70 lines

Re: stencil apertures

Gabriela Bogdan <[log in to unmask]>

Thu, 15 Feb 2007 20:03:09 +0300

93 lines

New Thread

Stencil order specification

Stencil order specification

Martins Paula (BrgP/CoC-AVT) <[log in to unmask]>

Fri, 2 Feb 2007 16:28:53 -0000

30 lines

Re: Stencil order specification

Jack Crawford <[log in to unmask]>

Fri, 2 Feb 2007 11:28:33 -0600

74 lines

New Thread

Stencil Tensioning Systems

Stencil Tensioning Systems

Steve Gregory <[log in to unmask]>

Mon, 19 Feb 2007 08:58:38 -0600

38 lines

Re: Stencil Tensioning Systems

Bill Kunkle <[log in to unmask]>

Mon, 19 Feb 2007 18:25:49 -0500

72 lines

Re: Stencil Tensioning Systems

Ahne Oosterhof <[log in to unmask]>

Thu, 22 Feb 2007 12:56:47 -0800

67 lines

New Thread

Sunsda conveyors

Sunsda conveyors

Neil Maloney <[log in to unmask]>

Tue, 27 Feb 2007 11:37:19 -0600

35 lines

New Thread

Tape and Reel source in Korea

Tape and Reel source in Korea

Phillip Bavaro <[log in to unmask]>

Wed, 7 Feb 2007 15:46:30 -0800

25 lines

New Thread

test

test

Kevin Glidden <[log in to unmask]>

Wed, 7 Feb 2007 15:38:35 -0500

22 lines

test

Wood, Kenneth <[log in to unmask]>

Fri, 23 Feb 2007 07:32:04 -0500

39 lines

New Thread

Test Fixture Verification Methods

Test Fixture Verification Methods

Leland Woodall <[log in to unmask]>

Thu, 22 Feb 2007 12:06:17 -0500

36 lines

Re: Test Fixture Verification Methods

Kolmodin, Todd <[log in to unmask]>

Thu, 22 Feb 2007 12:21:18 -0500

113 lines

New Thread

The continuing BGA story

The continuing BGA story

Peter Barton <[log in to unmask]>

Tue, 13 Feb 2007 17:09:00 +0000

40 lines

Re: The continuing BGA story

Juan T. Marugan <[log in to unmask]>

Fri, 16 Feb 2007 13:58:23 -0600

31 lines

New Thread

Thick Boards

Thick Boards

Rolfe, David <[log in to unmask]>

Tue, 27 Feb 2007 14:52:42 -0500

47 lines

Re: Thick Boards

Daniel Blass <[log in to unmask]>

Tue, 27 Feb 2007 13:51:48 -0600

30 lines

Re: Thick Boards

Kevin Glidden <[log in to unmask]>

Tue, 27 Feb 2007 15:59:17 -0500

71 lines

Re: Thick Boards

Kerry McMullen <[log in to unmask]>

Tue, 27 Feb 2007 16:03:26 -0500

79 lines

Re: Thick Boards

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 15:23:15 -0600

75 lines

Re: Thick Boards

Chezhian, Krishnan (Radhakrishnan) <[log in to unmask]>

Wed, 28 Feb 2007 08:28:05 +0800

198 lines

New Thread

Tooling Hole Quantity

Tooling Hole Quantity

Smith, Richard <[log in to unmask]>

Fri, 2 Feb 2007 10:53:58 -0500

30 lines

Re: Tooling Hole Quantity

Rey Sosa <[log in to unmask]>

Fri, 2 Feb 2007 08:15:52 -0800

62 lines

Re: Tooling Hole Quantity

Steve Smith <[log in to unmask]>

Fri, 2 Feb 2007 11:11:56 -0500

85 lines

Re: Tooling Hole Quantity

Hogg, Blair K. <[log in to unmask]>

Fri, 2 Feb 2007 11:15:02 -0500

70 lines

Re: Tooling Hole Quantity

Jerry Dengler <[log in to unmask]>

Fri, 2 Feb 2007 11:16:20 -0500

59 lines

Re: Tooling Hole Quantity

Ryan Grant <[log in to unmask]>

Fri, 2 Feb 2007 09:18:56 -0700

71 lines

New Thread

Traces between 0402 pads

Re: Traces between 0402 pads

Tempea, Ioan <[log in to unmask]>

Fri, 16 Feb 2007 08:39:47 -0500

30 lines

Re: Traces between 0402 pads

Hogg, Blair K. <[log in to unmask]>

Sun, 18 Feb 2007 10:43:45 -0500

75 lines

Re: Traces between 0402 pads

Guy Ramsey <[log in to unmask]>

Sun, 18 Feb 2007 20:01:12 -0500

90 lines

New Thread

type UR conformal coatings

type UR conformal coatings

Edward Mines <[log in to unmask]>

Sat, 17 Feb 2007 11:06:06 -0800

37 lines

New Thread

UNDER CURED EPOXY ON PWB

UNDER CURED EPOXY ON PWB

Roberts, Jon <[log in to unmask]>

Thu, 22 Feb 2007 08:04:50 -0600

33 lines

New Thread

Using Type AR Conformal Coating

Using Type AR Conformal Coating

- Bogert <[log in to unmask]>

Thu, 15 Feb 2007 19:24:21 -0500

43 lines

Re: Using Type AR Conformal Coating

[log in to unmask]

Thu, 15 Feb 2007 20:29:09 EST

28 lines

Re: Using Type AR Conformal Coating

Phillip Bavaro <[log in to unmask]>

Thu, 15 Feb 2007 18:34:57 -0800

101 lines

Re: Using Type AR Conformal Coating

Marsico, James <[log in to unmask]>

Fri, 16 Feb 2007 07:02:51 -0500

83 lines

Re: Using Type AR Conformal Coating

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 16 Feb 2007 07:18:39 -0700

83 lines

Re: Using Type AR Conformal Coating

Steve Gregory <[log in to unmask]>

Fri, 16 Feb 2007 08:50:06 -0600

112 lines

Re: Using Type AR Conformal Coating

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 16 Feb 2007 07:55:47 -0700

123 lines

Re: Using Type AR Conformal Coating

Gervascio, Thomas <[log in to unmask]>

Fri, 16 Feb 2007 10:08:02 -0500

86 lines

Re: Using Type AR Conformal Coating

[log in to unmask]

Fri, 16 Feb 2007 12:42:34 EST

36 lines

Re: Using Type AR Conformal Coating

Dehoyos, Ramon <[log in to unmask]>

Fri, 16 Feb 2007 15:50:33 -0500

113 lines

New Thread

Via in Pad question

Via in Pad question

Carl VanWormer <[log in to unmask]>

Tue, 27 Feb 2007 08:57:40 -0800

42 lines

Re: Via in Pad question

Upton, Shawn <[log in to unmask]>

Tue, 27 Feb 2007 12:56:19 -0500

64 lines

Re: Via in Pad question

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 27 Feb 2007 11:03:32 -0700

72 lines

Re: Via in Pad question

Dave Seymour <[log in to unmask]>

Tue, 27 Feb 2007 13:10:38 -0500

161 lines

Re: Via in Pad question

Marsico, James <[log in to unmask]>

Tue, 27 Feb 2007 13:13:35 -0500

106 lines

Re: Via in Pad question

Steve Gregory <[log in to unmask]>

Tue, 27 Feb 2007 12:26:23 -0600

86 lines

Re: Via in Pad question

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 12:43:38 -0600

203 lines

Re: Via in Pad question

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 12:44:06 -0600

126 lines

Re: Via in Pad question

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 12:50:09 -0600

109 lines

Re: Via in Pad question

John Parsons <[log in to unmask]>

Tue, 27 Feb 2007 11:19:00 -0800

152 lines

Re: Via in Pad question

Nowland, Russell Howard (Russell) <[log in to unmask]>

Tue, 27 Feb 2007 13:37:01 -0600

99 lines

Re: Via in Pad question

Steve Gregory <[log in to unmask]>

Tue, 27 Feb 2007 13:51:19 -0600

134 lines

Re: Via in Pad question

Stadem, Richard D. <[log in to unmask]>

Tue, 27 Feb 2007 13:57:46 -0600

121 lines

Re: Via in Pad question

BADRI <[log in to unmask]>

Wed, 28 Feb 2007 12:33:57 +0530

84 lines

Re: Via in Pad question

Nowland, Russell Howard (Russell) <[log in to unmask]>

Wed, 28 Feb 2007 10:07:33 -0600

171 lines

Re: Via in Pad question

Dehoyos, Ramon <[log in to unmask]>

Wed, 28 Feb 2007 12:36:30 -0500

152 lines

New Thread

What to do with expired solder paste?

What to do with expired solder paste?

Genny Gibbard <[log in to unmask]>

Fri, 9 Feb 2007 09:25:49 -0600

30 lines

Re: What to do with expired solder paste?

Leland Woodall <[log in to unmask]>

Fri, 9 Feb 2007 10:27:51 -0500

70 lines

Re: What to do with expired solder paste?

Sauer, Steve (Xetron) <[log in to unmask]>

Fri, 9 Feb 2007 10:33:11 -0500

65 lines

Re: What to do with expired solder paste?

Bill Kasprzak <[log in to unmask]>

Fri, 9 Feb 2007 10:46:53 -0500

84 lines

Re: What to do with expired solder paste?

Craig Cullum <[log in to unmask]>

Fri, 9 Feb 2007 09:48:54 -0600

55 lines

Re: What to do with expired solder paste?

Genny Gibbard <[log in to unmask]>

Fri, 9 Feb 2007 09:50:01 -0600

70 lines

Re: What to do with expired solder paste?

Guy Ramsey <[log in to unmask]>

Fri, 9 Feb 2007 10:52:15 -0500

45 lines

Re: What to do with expired solder paste?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 9 Feb 2007 09:08:43 -0700

59 lines

Re: What to do with expired solder paste?

Steve Gregory <[log in to unmask]>

Fri, 9 Feb 2007 10:43:51 -0600

106 lines

Re: What to do with expired solder paste?

Brian Ellis <[log in to unmask]>

Fri, 9 Feb 2007 18:51:40 +0200

49 lines

Re: What to do with expired solder paste?

Mike Fenner <[log in to unmask]>

Fri, 9 Feb 2007 16:54:03 -0000

135 lines

Re: What to do with expired solder paste?

Brian Ellis <[log in to unmask]>

Fri, 9 Feb 2007 18:55:00 +0200

125 lines

Re: What to do with expired solder paste?

P. Langeveld <[log in to unmask]>

Fri, 9 Feb 2007 22:08:47 +0100

56 lines

Re: What to do with expired solder paste?

Stadem, Richard D. <[log in to unmask]>

Mon, 12 Feb 2007 07:28:32 -0600

54 lines

Re: What to do with expired solder paste?

Stadem, Richard D. <[log in to unmask]>

Mon, 12 Feb 2007 07:29:42 -0600

55 lines

Re: What to do with expired solder paste?

Phil Zarrow <[log in to unmask]>

Mon, 12 Feb 2007 11:23:48 EST

31 lines

Re: What to do with expired solder paste?

Christopher Nash <[log in to unmask]>

Mon, 12 Feb 2007 15:02:35 -0500

70 lines

Re: What to do with expired solder paste?

David Suraski <[log in to unmask]>

Mon, 12 Feb 2007 20:45:13 -0500

64 lines

Re: What to do with expired solder paste?

Mike Fenner <[log in to unmask]>

Tue, 13 Feb 2007 08:48:28 -0000

72 lines

New Thread

[LF] Korea's version of the RoHS, ELV and WEEE Directives

Re: [LF] Korea's version of the RoHS, ELV and WEEE Directives

John Burke <[log in to unmask]>

Tue, 27 Feb 2007 10:19:32 -0800

144 lines

New Thread

[SPAM] Re: [TN] Tooling Hole Quantity

Re: [SPAM] Re: [TN] Tooling Hole Quantity

Steve Smith <[log in to unmask]>

Fri, 2 Feb 2007 11:18:08 -0500

128 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager