DESIGNERCOUNCIL Archives

September 2006

DesignerCouncil@IPC.ORG
Options:

Subject

From

Date Sorted by Date, Most Recent First
Re: CID Certification Study
Litson, Cherie
Fri, 29 Sep 2006 17:47:38 -0700
Re: CID Certification Study
Gary Ferrari
Thu, 28 Sep 2006 23:08:25 -0400
CID Certification Study
Wasif Ali
Thu, 28 Sep 2006 18:16:10 -0700
Re: Fabrication Data
Brand, Rodney
Thu, 28 Sep 2006 12:28:37 -0400
Re: Fabrication Data
Tempea, Ioan
Thu, 28 Sep 2006 12:23:59 -0400
Fabrication Data
McGlaughlin, Jeffrey A
Thu, 28 Sep 2006 11:46:24 -0400
Re: Wave soldering and vias.
Anderson, Veronika
Thu, 28 Sep 2006 11:03:59 -0400
Wave soldering and vias.
Adam Smith
Thu, 28 Sep 2006 07:52:48 -0700
Last Chance to Register for the IPC Designers Certification Workshop in Washington, D.C.
Nate Fitt
Tue, 26 Sep 2006 10:34:57 -0500
Designers Learning Symposium Comes to San Diego!
Brooks,Bill
Mon, 25 Sep 2006 14:51:12 -0700
Re: Trace propagation delay may not be the problem.
Balasubramanian Krishnan
Tue, 19 Sep 2006 18:45:02 +0530
Register Today for the San Diego IPC Designers Learning Symposium on Nov. 8th
Nate Fitt
Fri, 15 Sep 2006 10:27:12 -0500
Re: ENIG vs HASL/HAL cost, shelf life, and globality deltas
Ray Johnston
Fri, 15 Sep 2006 08:06:35 -0700
Re: Silver Finish
Jack Olson
Fri, 15 Sep 2006 09:15:13 -0500
ENIG vs HASL/HAL cost, shelf life, and globality deltas
Gary M. Koven
Fri, 15 Sep 2006 09:54:12 -0400
Re: High-speed data converter grounding
Matthew Lamkin
Fri, 15 Sep 2006 14:14:18 +0100
Re: High-speed data converter grounding
Patrick Jabbaz
Thu, 14 Sep 2006 16:47:54 -0700
Last Chance to Register for the IPC Designers Certification Workshop in Durham, NC
Nate Fitt
Thu, 14 Sep 2006 13:14:32 -0500
Re: High-speed data converter grounding
McGlaughlin, Jeffrey A
Thu, 14 Sep 2006 13:22:14 -0400
Re: High-speed data converter grounding
Susy Webb
Thu, 14 Sep 2006 12:20:44 -0500
Re: High-speed data converter grounding
Babcock John
Thu, 14 Sep 2006 09:12:39 -0700
High-speed data converter grounding
Charles Gervasi
Thu, 14 Sep 2006 09:06:03 -0700
Routing Parallel vs. Paralell
Jack Olson
Thu, 14 Sep 2006 09:27:02 -0500
Re: Silver Finish
Jim Thornhill
Thu, 14 Sep 2006 09:55:35 +0100
Re: Silver Finish
<>
Thu, 14 Sep 2006 02:03:00 EDT
Silver Finish
Jack Olson
Thu, 14 Sep 2006 00:04:20 -0500
Re: Temp Testing
Jack Olson
Wed, 13 Sep 2006 23:53:30 -0500
Re: Routing under vias
George Patrick
Wed, 13 Sep 2006 20:49:54 -0700
Temp Testing
Tom Parkinson
Wed, 13 Sep 2006 14:38:06 -0400
Re: bed of nails vs Fly Probe testing
James Jackson
Wed, 13 Sep 2006 12:07:02 -0500
Re: Routing under vias
Terry Kozlyk
Wed, 13 Sep 2006 10:50:10 -0600
Re: bed of nails vs Fly Probe testing
Heidel, Jeff
Wed, 13 Sep 2006 10:28:40 -0600
Re: bed of nails vs Fly Probe testing
Terry Kozlyk
Wed, 13 Sep 2006 10:14:33 -0600
[Autoreply] Re: Re: [DC] meetings and information
<>
Tue, 12 Sep 2006 17:29:43 -0500
Re: meetings and information
Terry Kozlyk
Tue, 12 Sep 2006 16:29:30 -0600
Save the Date - IPC PCB Designers Certification Programs - San Jose, CA
Nate Fitt
Mon, 11 Sep 2006 13:25:09 -0500
Re: Peel strength - FR-4 versus Rogers 4350
<>
Thu, 7 Sep 2006 19:14:03 EDT
PCB designer position
Mike Joyner
Thu, 7 Sep 2006 08:46:16 -0400
SMT and LGA Assembly Expert
Ali Iramanesh
Wed, 6 Sep 2006 15:36:04 -0700
Peel strength - FR-4 versus Rogers 4350
Andre Demers
Wed, 6 Sep 2006 17:46:01 -0400
Direct full time position, Burlington VT
Derek Doucette
Wed, 6 Sep 2006 15:59:01 -0400
Re: Flex Circuits ?
Holmes Ben-CBH033
Wed, 6 Sep 2006 15:51:12 -0400
Re: Soldermask - question?
Gary Ferrari
Wed, 6 Sep 2006 08:09:34 -0400
Re: Soldermask - question?
Matthew Lamkin
Wed, 6 Sep 2006 10:07:31 +0100
Soldermask - question?
No Name
Wed, 6 Sep 2006 01:59:45 -0400
Meeting Announcement: SIlicon Valley Chapter (Tuesday, September 12)
Silicon Valley Chapter - IPC
Tue, 5 Sep 2006 12:47:50 -0700
Re: Who's afraid of the big, bad bend?
Tempea, Ioan
Tue, 5 Sep 2006 13:28:52 -0400
Who's afraid of the big, bad bend?
Charles Gervasi
Tue, 5 Sep 2006 10:01:21 -0700
Re: Best routing method- arc or 45deg or 90deg
Heidel, Jeff
Tue, 5 Sep 2006 07:55:53 -0600
Re: Best routing method- arc or 45deg or 90deg
Roger Stoops
Tue, 5 Sep 2006 09:44:11 -0400
Best routing method- arc or 45deg or 90deg
ert ert
Mon, 4 Sep 2006 09:01:05 +0100
Re: Hole diameter specification
George Patrick
Sat, 2 Sep 2006 16:01:24 -0700
Re: Hole diameter specification
Jack Olson
Sat, 2 Sep 2006 10:38:11 -0500
Re: Trace propagation delay may not be the problem.
Balasubramanian Krishnan
Sat, 2 Sep 2006 18:27:20 +0530
Last Chance to Register for the IPC Designers Certification Workshop in Durham, NC
Nate Fitt
Fri, 1 Sep 2006 09:28:43 -0500
Re: Trace propagation delay may not be the problem.
Charles Gervasi
Fri, 1 Sep 2006 06:46:41 -0700
Re: Trace propagation delay may not be the problem.
Balasubramanian Krishnan
Fri, 1 Sep 2006 12:50:38 +0530

ATOM RSS1 RSS2