LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


September 2003


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

5Sn / 95Pb Solder Sphere (11 messages)
<No subject> (1 message)
Acceptability of PCA Breakaways/Mouse bites (2 messages)
Aluminum Welding - Wrong Tungsten (4 messages)
Anita Equipment Servicing? (1 message)
Assembly Expert vs Circuit Cam (2 messages)
Bare Die and Technology Roadmaps - Get Educated (1 message)
Bare Die and Technology Roadmaps - Get Educated [NTC] (1 message)
Bare Die and Technology Roadmaps - Get Educated???? (5 messages)
BGA Strategy Webcast (1 message)
BGA780 tied directly to gnd plane (1 message)
Board edge to circuit spacing / IPC-2221 ? (8 messages)
Building Fabs to IPC-6012 spec's... (6 messages)
buy for now (12 messages)
Chemical Resistant Inks (3 messages)
Circuit Card Handling?? (3 messages)
Class 3 Handling requirements (4 messages)
Cleaning Tight fitting SMT Components (3 messages)
Conductive Silver Epoxy filled-vias, inspection requirements (1 message)
conformal coating help needed (9 messages)
Contamination (6 messages)
contamination-free gloves (7 messages)
controlled impedance - characteristic vs. differential (1 message)
controlled impedance.. (2 messages)
Data Collection Methods (2 messages)
Detrex AVD-212 Vapor Degreaser (1 message)
Dual Head Pin Inserter (1 message)
dxf to gerber.. (4 messages)
Effects of humidity on soldering (6 messages)
Elimination of solder balls formed thru 0.45mm vias during wave (1 message)
ESD Hot gloves (1 message)
ESD packaging vendor (1 message)
Factors affecting insulation resistance (4 messages)
FMEA Manual/Guide (4 messages)
FMEA-Pro Software? (1 message)
FR-4 (7 messages)
Gaskets (4 messages)
Getting the Lead Out with Dr. Jennie Hwang (1 message)
Gold-tin solder (1 message)
Goodbye! (movin-on) :) **SOME NTC** (2 messages)
GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation (2 messages)
Hi-density testing (1 message)
High heat sink board hand soldering (2 messages)
High Temp Solder Sphere ( 5Sn / 95Pb) (2 messages)
Hole break out (3 messages)
I keeping my own emails back (3 messages)
Immersion Silver (6 messages)
In-Line AOI (1 message)
Inner Laye Ground Shorts (1 message)
Inner Layer Ground Shorts (8 messages)
Ionograph (16 messages)
Ionograph / Why "no clean"? (1 message)
IPC 2004-2005 Technology Roadmap Kickoff Meeting (1 message)
IPC Designers Learning Symposium in Montreal, Canada! (1 message)
IPC Seeking Industry Experts on Tin Whiskers (4 messages)
IPC-2221/Electrical Conductor Spacing (1 message)
IPC-356 netlist question (3 messages)
IPC-7095 BGA land szie approximation (UC) (1 message)
Karen Walters/USA/Skyworks is out of the office. (1 message)
Lambert PTH fatigue (5 messages)
Large PCB fabrication (1 message)
Lead Free (2 messages)
Lead free components (5 messages)
Lead Free PCB's (4 messages)
Lead Free Solder (1 message)
LED Soldering Query (15 messages)
Liquid Mask (11 messages)
looking for Fuji 8X2 feeders to fit a CP4-2 (2 messages)
LTCC (4 messages)
Materials Inert to Fungus and Fungus Nutrients (2 messages)
measurement systems calibration (4 messages)
measuring the thickness of cured conformal coating (6 messages)
MIL-P-13949 GBN (2 messages)
MIL-P-55110 (4 messages)
Mil-P-55110 versus MIL-PRF-31032 (1 message)
Moisture under chip capacitors (5 messages)
More on MIL-P-13949 GBN (1 message)
Need a specification number (2 messages)
New forum on www.smtinfo.net (1 message)
Notices (17 messages)
OSP vs HASL (5 messages)
Pace soldering irons (3 messages)
paper (1 message)
PCB delamination Evaluation (6 messages)
PCB substrate identification markings (2 messages)
pic's (15 messages)
Pink Ring not for space application? (1 message)
Potential Problems with Mold Compound (2 messages)
Preheat of ceramic chip capacitors (9 messages)
prepreg classification (3 messages)
Probimer 77 soldermask (6 messages)
PTI value (7 messages)
PWB MATERIAL (1 message)
PWB repair (2 messages)
QFN layout designs (1 message)
Questions on Soft gold plating. (3 messages)
RE : [TN] PWB repair (1 message)
RE : [TN] Scanning a document and saving it as a pdf file (1 message)
RE : [TN] Silicone conformal coating (1 message)
Reference book for SMT (2 messages)
Reflow Oven SMR 400 (3 messages)
Reliability question (10 messages)
resend.. controlled impedance - characteristic vs. differential (1 message)
Rework (4 messages)
Robert Coburn/TDI_NOTES is out of the office. (1 message)
Saponifier Concentration (11 messages)
Saponifier Concentration II (1 message)
Saponifier Concentration More than you ever wanted to kn ow.. (1 message)
Saponifier Concentration More than you ever wanted to know.. (3 messages)
Scanning a document and saving it as a pdf file (9 messages)
Selective Edge Plating (8 messages)
Self Align BGAs less radiation (2 messages)
Silicone conformal coating (36 messages)
Silkscreen in solder pad (9 messages)
Silver Immersion right for fine pitch? (5 messages)
Software package validation (2 messages)
Solder Balls (13 messages)
Solder balls under parts (2 messages)
Solder shorts defects in the passives components at the solder side in double side board through the wave solder (2 messages)
Solderability Testing (1 message)
Soldering Iron Analyzers (5 messages)
Spec question (5 messages)
Speedboard Experience (3 messages)
spray nozzle configuration for etching (1 message)
Static sensitive components (3 messages)
stencil (7 messages)
Strange part cracking... (7 messages)
Termination material (3 messages)
Tolerances (7 messages)
Training (5 messages)
Vacuum Furnace (2 messages)
Vibration specs (1 message)
Vibration testing (2 messages)
Virus SOBIG etc., was: [TN] Notices (1 message)
warp heatsink (2 messages)
Where is Mike Fitts? (3 messages)
Wire Crimp Terminals Plating (Sn) (2 messages)
Xray laminography source (1 message)
Zinc Plating Finish (13 messages)
Zinc Plating Finish(3) (1 message)
[NTC] Looking under BGA (2 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Dehoyos, Ramon <[log in to unmask]>

Wed, 17 Sep 2003 05:31:38 -0700

69 lines

New Thread

5Sn / 95Pb Solder Sphere

5Sn / 95Pb Solder Sphere

Victor Hernandez <[log in to unmask]>

Wed, 24 Sep 2003 07:10:09 -0500

75 lines

Re: 5Sn / 95Pb Solder Sphere

Marsico, James <[log in to unmask]>

Wed, 24 Sep 2003 08:17:22 -0400

67 lines

Re: 5Sn / 95Pb Solder Sphere

Guy Ramsey <[log in to unmask]>

Wed, 24 Sep 2003 08:28:42 -0400

147 lines

Re: 5Sn / 95Pb Solder Sphere

Werner Engelmaier <[log in to unmask]>

Wed, 24 Sep 2003 15:01:41 EDT

34 lines

Re: 5Sn / 95Pb Solder Sphere

Steve Gregory <[log in to unmask]>

Wed, 24 Sep 2003 15:25:00 EDT

92 lines

Re: 5Sn / 95Pb Solder Sphere

Marsico, James <[log in to unmask]>

Wed, 24 Sep 2003 16:10:29 -0400

86 lines

Re: 5Sn / 95Pb Solder Sphere

Wei-Shun Wang <[log in to unmask]>

Wed, 24 Sep 2003 13:38:41 -0700

56 lines

Re: 5Sn / 95Pb Solder Sphere

Werner Engelmaier <[log in to unmask]>

Wed, 24 Sep 2003 18:11:50 EDT

44 lines

Re: 5Sn / 95Pb Solder Sphere

Steve Gregory <[log in to unmask]>

Wed, 24 Sep 2003 18:27:22 EDT

141 lines

Re: 5Sn / 95Pb Solder Sphere

Ryan Grant <[log in to unmask]>

Wed, 24 Sep 2003 17:03:32 -0600

250 lines

Re: 5Sn / 95Pb Solder Sphere

Dave Hillman <[log in to unmask]>

Thu, 25 Sep 2003 17:01:47 -0500

145 lines

New Thread

<No subject>

<No subject>

Maribel Espinoza-Hoover <[log in to unmask]>

Tue, 16 Sep 2003 15:15:56 -0500

33 lines

New Thread

Acceptability of PCA Breakaways/Mouse bites

Acceptability of PCA Breakaways/Mouse bites

McGlaughlin, Jeffrey A <[log in to unmask]>

Mon, 22 Sep 2003 11:27:17 -0400

31 lines

Re: Acceptability of PCA Breakaways/Mouse bites

Franklin D Asbell <[log in to unmask]>

Mon, 22 Sep 2003 11:18:16 -0500

29 lines

New Thread

Aluminum Welding - Wrong Tungsten

Aluminum Welding - Wrong Tungsten

Virgil Lenton <[log in to unmask]>

Fri, 26 Sep 2003 13:52:49 -0500

42 lines

Re: Aluminum Welding - Wrong Tungsten

Dehoyos, Ramon <[log in to unmask]>

Fri, 26 Sep 2003 12:44:47 -0700

76 lines

Re: Aluminum Welding - Wrong Tungsten

Virgil Lenton <[log in to unmask]>

Fri, 26 Sep 2003 14:08:18 -0600

106 lines

Re: Aluminum Welding - Wrong Tungsten

David Douthit <[log in to unmask]>

Fri, 26 Sep 2003 17:17:57 -0700

72 lines

New Thread

Anita Equipment Servicing?

Anita Equipment Servicing?

[log in to unmask]

Wed, 24 Sep 2003 14:43:23 -0400

31 lines

New Thread

Assembly Expert vs Circuit Cam

Assembly Expert vs Circuit Cam

Scott Lefebvre <[log in to unmask]>

Thu, 25 Sep 2003 16:16:18 -0700

194 lines

Re: Assembly Expert vs Circuit Cam

Mark Austin <[log in to unmask]>

Fri, 26 Sep 2003 09:13:00 +0100

75 lines

New Thread

Bare Die and Technology Roadmaps - Get Educated

Bare Die and Technology Roadmaps - Get Educated

Alexandra Curtis <[log in to unmask]>

Wed, 3 Sep 2003 14:55:01 -0500

56 lines

New Thread

Bare Die and Technology Roadmaps - Get Educated [NTC]

Re: Bare Die and Technology Roadmaps - Get Educated [NTC]

Guy Ramsey <[log in to unmask]>

Thu, 4 Sep 2003 08:18:07 -0400

48 lines

New Thread

Bare Die and Technology Roadmaps - Get Educated????

Re: Bare Die and Technology Roadmaps - Get Educated????

Rudy Sedlak <[log in to unmask]>

Wed, 3 Sep 2003 19:12:47 EDT

35 lines

Re: Bare Die and Technology Roadmaps - Get Educated????

Joe Fjelstad <[log in to unmask]>

Wed, 3 Sep 2003 19:28:02 EDT

76 lines

Re: Bare Die and Technology Roadmaps - Get Educated????

Steve Gregory <[log in to unmask]>

Wed, 3 Sep 2003 21:33:19 EDT

121 lines

Re: Bare Die and Technology Roadmaps - Get Educated????

Leigh-Ann Litavis <[log in to unmask]>

Wed, 3 Sep 2003 21:37:08 EDT

57 lines

Re: Bare Die and Technology Roadmaps - Get Educated????

Werner Engelmaier <[log in to unmask]>

Wed, 3 Sep 2003 23:07:34 EDT

24 lines

New Thread

BGA Strategy Webcast

BGA Strategy Webcast

Alexandra Curtis <[log in to unmask]>

Thu, 25 Sep 2003 12:54:05 -0500

181 lines

New Thread

BGA780 tied directly to gnd plane

BGA780 tied directly to gnd plane

Kile, Judy K (MED) <[log in to unmask]>

Tue, 30 Sep 2003 16:10:41 -0500

47 lines

New Thread

Board edge to circuit spacing / IPC-2221 ?

Board edge to circuit spacing / IPC-2221 ?

Robert Coburn <[log in to unmask]>

Tue, 9 Sep 2003 10:20:32 -0400

57 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Guy Ramsey <[log in to unmask]>

Tue, 9 Sep 2003 10:39:03 -0400

152 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Victor Hernandez <[log in to unmask]>

Tue, 9 Sep 2003 09:43:39 -0500

130 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Blair K. Hogg <[log in to unmask]>

Tue, 9 Sep 2003 11:02:40 -0400

56 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Whittaker, Dewey (AZ75) <[log in to unmask]>

Tue, 9 Sep 2003 07:45:27 -0700

61 lines

Re: Board edge to circuit spacing / IPC-2221 ?

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 9 Sep 2003 11:29:47 -0400

95 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Mcmaster, Michael <[log in to unmask]>

Tue, 9 Sep 2003 08:36:11 -0700

227 lines

Re: Board edge to circuit spacing / IPC-2221 ?

Reuven ROKAH <[log in to unmask]>

Wed, 10 Sep 2003 09:10:35 +0300

79 lines

New Thread

Building Fabs to IPC-6012 spec's...

Building Fabs to IPC-6012 spec's...

Steve Gregory <[log in to unmask]>

Mon, 15 Sep 2003 11:11:03 EDT

58 lines

Re: Building Fabs to IPC-6012 spec's...

Mcmaster, Michael <[log in to unmask]>

Mon, 15 Sep 2003 09:26:56 -0700

182 lines

Re: Building Fabs to IPC-6012 spec's...

Mark Hargreaves <[log in to unmask]>

Mon, 15 Sep 2003 12:39:50 -0400

43 lines

Re: Building Fabs to IPC-6012 spec's...

Steve Gregory <[log in to unmask]>

Mon, 15 Sep 2003 14:31:43 EDT

121 lines

Re: Building Fabs to IPC-6012 spec's...

Steve Gregory <[log in to unmask]>

Mon, 15 Sep 2003 21:09:53 EDT

81 lines

Re: Building Fabs to IPC-6012 spec's...

Quality <[log in to unmask]>

Tue, 16 Sep 2003 17:37:00 -0400

70 lines

New Thread

buy for now

buy for now

joyce <[log in to unmask]>

Fri, 26 Sep 2003 10:24:31 -0400

83 lines

Re: buy for now

Steve Thomas <[log in to unmask]>

Fri, 26 Sep 2003 08:00:54 -0700

149 lines

Re: buy for now

Macko, Joe @ IEC <[log in to unmask]>

Fri, 26 Sep 2003 09:23:14 -0700

212 lines

Re: buy for now

Chris Robertson <[log in to unmask]>

Fri, 26 Sep 2003 11:33:03 -0500

173 lines

Re: buy for now

Joseph H. Smith <[log in to unmask]>

Fri, 26 Sep 2003 09:35:53 -0700

253 lines

Re: buy for now

Charles Caswell <[log in to unmask]>

Fri, 26 Sep 2003 12:10:54 -0500

288 lines

Re: buy for now

Mike McMonagle <[log in to unmask]>

Fri, 26 Sep 2003 12:51:29 -0500

385 lines

Re: buy for now

Jason W. Gregory <[log in to unmask]>

Fri, 26 Sep 2003 12:59:13 -0500

187 lines

Re: buy for now

Mike McMonagle <[log in to unmask]>

Fri, 26 Sep 2003 13:07:14 -0500

236 lines

Re: buy for now

Steve Gregory <[log in to unmask]>

Fri, 26 Sep 2003 17:36:43 EDT

100 lines

Re: buy for now

Ingemar Hernefjord (KC/EMW) <[log in to unmask]>

Mon, 29 Sep 2003 08:42:30 +0200

147 lines

Re: buy for now

Dieselberg, Ron <[log in to unmask]>

Mon, 29 Sep 2003 05:59:08 -0400

401 lines

New Thread

Chemical Resistant Inks

Chemical Resistant Inks

Andre Leclair <[log in to unmask]>

Fri, 19 Sep 2003 10:48:57 -0500

27 lines

Re: Chemical Resistant Inks

Kathy Kuhlow <[log in to unmask]>

Fri, 19 Sep 2003 11:14:46 -0500

71 lines

Re: Chemical Resistant Inks

Charlie Pitarys <[log in to unmask]>

Fri, 19 Sep 2003 16:46:57 -0400

151 lines

New Thread

Circuit Card Handling??

Circuit Card Handling??

Jason Wilson <[log in to unmask]>

Mon, 8 Sep 2003 07:45:44 -0500

43 lines

Re: Circuit Card Handling??

Steve Gregory <[log in to unmask]>

Mon, 8 Sep 2003 09:20:42 EDT

127 lines

Re: Circuit Card Handling??

Morse, Carrie <[log in to unmask]>

Mon, 8 Sep 2003 10:56:08 -0400

101 lines

New Thread

Class 3 Handling requirements

Class 3 Handling requirements

Deborah Schepis <[log in to unmask]>

Fri, 19 Sep 2003 09:56:13 -0400

36 lines

Re: Class 3 Handling requirements

Franklin D Asbell <[log in to unmask]>

Fri, 19 Sep 2003 09:52:23 -0500

28 lines

Re: Class 3 Handling requirements

d. terstegge <[log in to unmask]>

Fri, 19 Sep 2003 16:43:41 +0200

88 lines

Re: Class 3 Handling requirements

Gregg Owens <[log in to unmask]>

Fri, 19 Sep 2003 23:48:26 -0700

93 lines

New Thread

Cleaning Tight fitting SMT Components

Cleaning Tight fitting SMT Components

Evans, Jack <[log in to unmask]>

Fri, 26 Sep 2003 14:25:30 -0600

25 lines

Re: Cleaning Tight fitting SMT Components

d. terstegge <[log in to unmask]>

Mon, 29 Sep 2003 10:05:57 +0200

82 lines

Re: Cleaning Tight fitting SMT Components

Brian Ellis <[log in to unmask]>

Mon, 29 Sep 2003 11:45:07 +0300

56 lines

New Thread

Conductive Silver Epoxy filled-vias, inspection requirements

Conductive Silver Epoxy filled-vias, inspection requirements

Franklin D Asbell <[log in to unmask]>

Thu, 25 Sep 2003 08:58:49 -0500

24 lines

New Thread

conformal coating help needed

conformal coating help needed

Peter Z <[log in to unmask]>

Wed, 24 Sep 2003 20:37:31 -0500

37 lines

Re: conformal coating help needed

David Douthit <[log in to unmask]>

Wed, 24 Sep 2003 22:26:43 -0700

74 lines

Re: conformal coating help needed

Graham Naisbitt <[log in to unmask]>

Thu, 25 Sep 2003 11:50:47 +0100

95 lines

Re: conformal coating help needed

Dehoyos, Ramon <[log in to unmask]>

Thu, 25 Sep 2003 06:06:39 -0700

87 lines

Re: conformal coating help needed

Peter Zosimadis <[log in to unmask]>

Thu, 25 Sep 2003 12:13:38 -0400

128 lines

Re: conformal coating help needed

Crepeau, Phil <[log in to unmask]>

Thu, 25 Sep 2003 09:30:26 -0700

171 lines

Re: conformal coating help needed

David Douthit <[log in to unmask]>

Thu, 25 Sep 2003 10:19:24 -0700

152 lines

Re: conformal coating help needed

Dehoyos, Ramon <[log in to unmask]>

Thu, 25 Sep 2003 12:47:21 -0700

160 lines

Re: conformal coating help needed

Rodney Miller <[log in to unmask]>

Fri, 26 Sep 2003 09:33:09 -0500

201 lines

New Thread

Contamination

Contamination

Joe Birli <[log in to unmask]>

Thu, 4 Sep 2003 11:10:35 -0400

34 lines

Re: Contamination

Morse, Carrie <[log in to unmask]>

Thu, 4 Sep 2003 11:18:05 -0400

64 lines

Re: Contamination

Joe Birli <[log in to unmask]>

Thu, 4 Sep 2003 11:35:54 -0400

46 lines

Re: Contamination

Brian Ellis <[log in to unmask]>

Thu, 4 Sep 2003 18:37:30 +0300

65 lines

Re: Contamination

Macko, Joe @ IEC <[log in to unmask]>

Thu, 4 Sep 2003 09:19:01 -0700

208 lines

Re: Contamination

Dieselberg, Ron <[log in to unmask]>

Fri, 5 Sep 2003 06:41:46 -0400

67 lines

New Thread

contamination-free gloves

contamination-free gloves

Marsico, James <[log in to unmask]>

Wed, 17 Sep 2003 13:42:45 -0400

33 lines

Re: contamination-free gloves

Donald Durett <[log in to unmask]>

Wed, 17 Sep 2003 14:01:51 -0400

68 lines

Re: contamination-free gloves

Dehoyos, Ramon <[log in to unmask]>

Wed, 17 Sep 2003 11:11:13 -0700

61 lines

Re: contamination-free gloves

Smith, Russell (US LA) <[log in to unmask]>

Wed, 17 Sep 2003 12:09:47 -0700

76 lines

Re: contamination-free gloves

Brian Ellis <[log in to unmask]>

Thu, 18 Sep 2003 09:16:37 +0300

56 lines

Re: contamination-free gloves

joyce <[log in to unmask]>

Thu, 18 Sep 2003 07:35:33 -0400

97 lines

Re: contamination-free gloves

Marsico, James <[log in to unmask]>

Thu, 18 Sep 2003 07:55:40 -0400

132 lines

New Thread

controlled impedance - characteristic vs. differential

controlled impedance - characteristic vs. differential

Sergio T. Ruiz <[log in to unmask]>

Mon, 22 Sep 2003 12:13:20 -0700

54 lines

New Thread

controlled impedance..

controlled impedance..

Sergio T. Ruiz <[log in to unmask]>

Thu, 18 Sep 2003 09:48:00 -0700

47 lines

Re: controlled impedance..

Chezhian, Krishnan <[log in to unmask]>

Fri, 19 Sep 2003 13:38:49 +0800

86 lines

New Thread

Data Collection Methods

Data Collection Methods

Dacia Super <[log in to unmask]>

Tue, 23 Sep 2003 17:18:58 -0500

38 lines

Re: Data Collection Methods

McCabe, Chris <[log in to unmask]>

Wed, 24 Sep 2003 19:39:58 -0400

96 lines

New Thread

Detrex AVD-212 Vapor Degreaser

Detrex AVD-212 Vapor Degreaser

Mike McMonagle <[log in to unmask]>

Wed, 10 Sep 2003 08:13:33 -0500

98 lines

New Thread

Dual Head Pin Inserter

Dual Head Pin Inserter

Chad Haima <[log in to unmask]>

Thu, 4 Sep 2003 11:51:33 -0700

201 lines

New Thread

dxf to gerber..

dxf to gerber..

Sergio T. Ruiz <[log in to unmask]>

Tue, 23 Sep 2003 10:55:49 -0700

36 lines

Re: dxf to gerber..

John Parsons <[log in to unmask]>

Tue, 23 Sep 2003 08:12:54 -0700

57 lines

Re: dxf to gerber..

Dave Roesler <[log in to unmask]>

Tue, 23 Sep 2003 10:17:06 -0500

74 lines

Re: dxf to gerber..

Debbie Kenney <[log in to unmask]>

Wed, 24 Sep 2003 16:23:58 -0700

73 lines

New Thread

Effects of humidity on soldering

Effects of humidity on soldering

Howard Watson <[log in to unmask]>

Thu, 11 Sep 2003 11:53:21 -0600

66 lines

Re: Effects of humidity on soldering

Laroe, Mike <[log in to unmask]>

Thu, 11 Sep 2003 14:01:31 -0400

216 lines

Re: Effects of humidity on soldering

Stolar, Paul W <[log in to unmask]>

Thu, 11 Sep 2003 15:56:44 -0500

285 lines

Re: Effects of humidity on soldering

Brian Ellis <[log in to unmask]>

Fri, 12 Sep 2003 12:01:47 +0300

66 lines

Re: Effects of humidity on soldering

[log in to unmask]

Mon, 15 Sep 2003 19:16:37 EDT

87 lines

Re: Effects of humidity on soldering

Guy Ramsey <[log in to unmask]>

Tue, 16 Sep 2003 09:38:01 -0400

155 lines

New Thread

Elimination of solder balls formed thru 0.45mm vias during wave

Elimination of solder balls formed thru 0.45mm vias during wave

Grant Emandien <[log in to unmask]>

Fri, 5 Sep 2003 11:23:47 +0200

37 lines

New Thread

ESD Hot gloves

Re: ESD Hot gloves

Dave Chapman <[log in to unmask]>

Wed, 10 Sep 2003 14:04:11 -0500

46 lines

New Thread

ESD packaging vendor

Re: ESD packaging vendor

Dan R. Johnson <[log in to unmask]>

Mon, 8 Sep 2003 09:41:12 -0700

84 lines

New Thread

Factors affecting insulation resistance

Factors affecting insulation resistance

Murulidhara S <[log in to unmask]>

Wed, 17 Sep 2003 13:13:44 +0530

107 lines

Re: Factors affecting insulation resistance

Daan Terstegge <[log in to unmask]>

Wed, 17 Sep 2003 10:06:02 +0200

86 lines

Re: Factors affecting insulation resistance

Graham Naisbitt <[log in to unmask]>

Wed, 17 Sep 2003 11:25:08 +0100

208 lines

Re: Factors affecting insulation resistance

[log in to unmask]

Wed, 17 Sep 2003 09:09:56 EDT

29 lines

New Thread

FMEA Manual/Guide

FMEA Manual/Guide

Carlr Ray <[log in to unmask]>

Tue, 23 Sep 2003 09:40:25 -0500

27 lines

FMEA Manual/Guide

[log in to unmask]

Tue, 23 Sep 2003 10:44:32 -0400

36 lines

Re: FMEA Manual/Guide

Paul Signorelli <[log in to unmask]>

Tue, 23 Sep 2003 09:46:32 -0500

60 lines

Re: FMEA Manual/Guide

Rick Thompson <[log in to unmask]>

Tue, 23 Sep 2003 08:47:44 -0700

63 lines

New Thread

FMEA-Pro Software?

FMEA-Pro Software?

Rick Thompson <[log in to unmask]>

Fri, 26 Sep 2003 08:03:43 -0700

92 lines

New Thread

FR-4

FR-4

Ezequiel Cruz <[log in to unmask]>

Wed, 10 Sep 2003 10:37:33 -0500

24 lines

Re: FR-4

Jason W. Gregory <[log in to unmask]>

Wed, 10 Sep 2003 11:06:07 -0500

85 lines

Re: FR-4

Jim Geer <[log in to unmask]>

Wed, 10 Sep 2003 09:08:25 -0700

49 lines

Re: FR-4

Chad Haima <[log in to unmask]>

Wed, 10 Sep 2003 09:09:57 -0700

55 lines

Re: FR-4

Jason W. Gregory <[log in to unmask]>

Wed, 10 Sep 2003 11:10:21 -0500

91 lines

Re: FR-4

Geoff Layhe <[log in to unmask]>

Wed, 10 Sep 2003 17:34:02 +0100

66 lines

Re: FR-4

Cal Driscoll <[log in to unmask]>

Wed, 10 Sep 2003 14:01:00 -0400

73 lines

New Thread

Gaskets

Gaskets

Angela Gregor <[log in to unmask]>

Wed, 3 Sep 2003 10:06:33 -0700

55 lines

Gaskets

agregor <[log in to unmask]>

Wed, 3 Sep 2003 10:03:34 -0700

199 lines

Gaskets

agregor <[log in to unmask]>

Wed, 3 Sep 2003 10:05:12 -0700

199 lines

Re: Gaskets

Croslin, Robert <[log in to unmask]>

Wed, 3 Sep 2003 13:35:43 -0400

86 lines

New Thread

Getting the Lead Out with Dr. Jennie Hwang

Getting the Lead Out with Dr. Jennie Hwang

Alexandra Curtis <[log in to unmask]>

Tue, 23 Sep 2003 15:09:52 -0500

65 lines

New Thread

Gold-tin solder

Gold-tin solder

Phillip Hinton <[log in to unmask]>

Thu, 4 Sep 2003 12:21:28 EDT

54 lines

New Thread

Goodbye! (movin-on) :) **SOME NTC**

Goodbye! (movin-on) :) **SOME NTC**

Grabski III, John R. <[log in to unmask]>

Wed, 3 Sep 2003 09:16:00 -0400

54 lines

Re: Goodbye! (movin-on) :) **SOME NTC**

d. terstegge <[log in to unmask]>

Thu, 4 Sep 2003 12:15:45 +0200

106 lines

New Thread

GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation

GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation

Steve Gregory <[log in to unmask]>

Wed, 10 Sep 2003 09:27:55 EDT

63 lines

Re: GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation

Dave Hillman <[log in to unmask]>

Wed, 10 Sep 2003 10:02:27 -0500

94 lines

New Thread

Hi-density testing

Hi-density testing

Steve Kelly <[log in to unmask]>

Tue, 30 Sep 2003 12:58:29 -0400

168 lines

New Thread

High heat sink board hand soldering

Re: High heat sink board hand soldering

Don_well <[log in to unmask]>

Mon, 15 Sep 2003 11:45:37 +0800

57 lines

Re: High heat sink board hand soldering

Werner Engelmaier <[log in to unmask]>

Mon, 15 Sep 2003 22:18:12 EDT

40 lines

New Thread

High Temp Solder Sphere ( 5Sn / 95Pb)

High Temp Solder Sphere ( 5Sn / 95Pb)

Victor Hernandez <[log in to unmask]>

Wed, 24 Sep 2003 08:45:38 -0500

158 lines

Re: High Temp Solder Sphere ( 5Sn / 95Pb)

Marsico, James <[log in to unmask]>

Wed, 24 Sep 2003 12:59:21 -0400

115 lines

New Thread

Hole break out

Hole break out

Victor Hernandez <[log in to unmask]>

Tue, 16 Sep 2003 12:14:42 -0500

94 lines

Re: Hole break out

John Parsons <[log in to unmask]>

Tue, 16 Sep 2003 10:22:38 -0700

118 lines

Re: Hole break out

Guy Ramsey <[log in to unmask]>

Tue, 16 Sep 2003 13:52:41 -0400

146 lines

New Thread

I keeping my own emails back

I keeping my own emails back

Leigh-Ann Litavis <[log in to unmask]>

Fri, 5 Sep 2003 10:46:29 EDT

61 lines

Re: I keeping my own emails back

Roger Stoops <[log in to unmask]>

Fri, 5 Sep 2003 10:58:55 -0400

143 lines

Re: I keeping my own emails back

Dieselberg, Ron <[log in to unmask]>

Fri, 5 Sep 2003 12:15:15 -0400

148 lines

New Thread

Immersion Silver

Immersion Silver

Black, Paul <[log in to unmask]>

Wed, 17 Sep 2003 14:13:21 -0400

88 lines

Re: Immersion Silver

Guy Ramsey <[log in to unmask]>

Wed, 17 Sep 2003 14:52:46 -0400

175 lines

Re: Immersion Silver

George Milad <[log in to unmask]>

Wed, 17 Sep 2003 19:00:20 EDT

19 lines

Re: Immersion Silver

George Milad <[log in to unmask]>

Wed, 17 Sep 2003 19:06:22 EDT

71 lines

Re: Immersion Silver

Mcmaster, Michael <[log in to unmask]>

Wed, 17 Sep 2003 17:23:58 -0700

214 lines

Re: Immersion Silver

Ezequiel Cruz <[log in to unmask]>

Tue, 23 Sep 2003 11:08:26 -0500

22 lines

New Thread

In-Line AOI

Re: In-Line AOI

Taylor, Royce <[log in to unmask]>

Tue, 2 Sep 2003 06:16:11 -0500

98 lines

New Thread

Inner Laye Ground Shorts

Inner Laye Ground Shorts

Franklin D Asbell <[log in to unmask]>

Thu, 18 Sep 2003 16:31:57 -0500

32 lines

New Thread

Inner Layer Ground Shorts

Inner Layer Ground Shorts

Krishnan C <[log in to unmask]>

Thu, 18 Sep 2003 02:29:12 -0500

32 lines

Re: Inner Layer Ground Shorts

Rudy Sedlak <[log in to unmask]>

Thu, 18 Sep 2003 04:48:58 -0400

28 lines

Re: Inner Layer Ground Shorts

[log in to unmask]

Thu, 18 Sep 2003 08:38:08 EDT

56 lines

Re: Inner Layer Ground Shorts

Fineline Circuits, Inc. <[log in to unmask]>

Thu, 18 Sep 2003 12:07:06 -0400

72 lines

Re: Inner Layer Ground Shorts

Donald Vischulis <[log in to unmask]>

Thu, 18 Sep 2003 13:00:08 -0500

56 lines

Re: Inner Layer Ground Shorts

Eddie Rocha <[log in to unmask]>

Thu, 18 Sep 2003 13:53:29 -0700

74 lines

Re: Inner Layer Ground Shorts

Chezhian, Krishnan <[log in to unmask]>

Fri, 19 Sep 2003 13:14:59 +0800

96 lines

Re: Inner Layer Ground Shorts

Brummer Chuck <[log in to unmask]>

Fri, 19 Sep 2003 08:24:53 -0700

355 lines

New Thread

Ionograph

Ionograph

Angela Gregor <[log in to unmask]>

Fri, 5 Sep 2003 14:25:29 -0700

30 lines

Re: Ionograph

Charles Caswell <[log in to unmask]>

Fri, 5 Sep 2003 14:41:40 -0500

65 lines

Re: Ionograph

Barmuta, Mike <[log in to unmask]>

Fri, 5 Sep 2003 13:42:53 -0700

98 lines

Re: Ionograph

Mel Parrish <[log in to unmask]>

Fri, 5 Sep 2003 15:55:01 -0500

92 lines

Re: Ionograph

Brian Ellis <[log in to unmask]>

Sat, 6 Sep 2003 10:29:27 +0300

97 lines

Re: Ionograph

Joe Fjelstad <[log in to unmask]>

Sat, 6 Sep 2003 12:51:36 EDT

63 lines

Re: Ionograph

Charles Caswell <[log in to unmask]>

Mon, 8 Sep 2003 07:17:50 -0500

125 lines

Re: Ionograph

joyce <[log in to unmask]>

Mon, 8 Sep 2003 08:19:08 -0400

151 lines

Re: Ionograph

Brian Ellis <[log in to unmask]>

Mon, 8 Sep 2003 15:33:27 +0300

200 lines

Re: Ionograph

Dehoyos, Ramon <[log in to unmask]>

Mon, 8 Sep 2003 06:27:58 -0700

175 lines

Re: Ionograph

Brian Ellis <[log in to unmask]>

Mon, 8 Sep 2003 17:18:32 +0300

174 lines

Re: Ionograph

Dehoyos, Ramon <[log in to unmask]>

Mon, 8 Sep 2003 10:10:41 -0700

273 lines

Re: Ionograph

David Douthit <[log in to unmask]>

Mon, 8 Sep 2003 13:05:28 -0700

242 lines

Re: Ionograph

Dehoyos, Ramon <[log in to unmask]>

Mon, 8 Sep 2003 13:41:11 -0700

414 lines

Re: Ionograph

David Douthit <[log in to unmask]>

Mon, 8 Sep 2003 17:22:31 -0700

360 lines

Re: Ionograph

Brian Ellis <[log in to unmask]>

Tue, 9 Sep 2003 14:22:58 +0300

509 lines

New Thread

Ionograph / Why "no clean"?

Re: Ionograph / Why "no clean"?

Reuven ROKAH <[log in to unmask]>

Tue, 9 Sep 2003 08:31:07 +0300

579 lines

New Thread

IPC 2004-2005 Technology Roadmap Kickoff Meeting

IPC 2004-2005 Technology Roadmap Kickoff Meeting

John Perry <[log in to unmask]>

Tue, 23 Sep 2003 16:15:04 -0500

349 lines

New Thread

IPC Designers Learning Symposium in Montreal, Canada!

IPC Designers Learning Symposium in Montreal, Canada!

Stephannie Caliendo <[log in to unmask]>

Tue, 23 Sep 2003 19:45:08 -0500

548 lines

New Thread

IPC Seeking Industry Experts on Tin Whiskers

IPC Seeking Industry Experts on Tin Whiskers

Alexandra Curtis <[log in to unmask]>

Tue, 16 Sep 2003 15:51:27 -0500

44 lines

Re: IPC Seeking Industry Experts on Tin Whiskers

Sklenar Vit (RBAU-EB/MGE4) * <[log in to unmask]>

Wed, 17 Sep 2003 06:31:42 +0200

81 lines

Re: IPC Seeking Industry Experts on Tin Whiskers

Wenger, George M. <[log in to unmask]>

Thu, 18 Sep 2003 08:35:49 -0500

52 lines

Re: IPC Seeking Industry Experts on Tin Whiskers

James TerVeen <[log in to unmask]>

Mon, 22 Sep 2003 08:31:37 -0400

83 lines

New Thread

IPC-2221/Electrical Conductor Spacing

IPC-2221/Electrical Conductor Spacing

Sefika Ozkal <[log in to unmask]>

Tue, 23 Sep 2003 15:57:19 +0300

54 lines

New Thread

IPC-356 netlist question

IPC-356 netlist question

Miswald, Ron <[log in to unmask]>

Thu, 25 Sep 2003 16:15:38 -0500

28 lines

Re: IPC-356 netlist question

Jeff Seeger <[log in to unmask]>

Thu, 25 Sep 2003 18:40:24 -0400

62 lines

Re: IPC-356 netlist question

David Ricketts <[log in to unmask]>

Fri, 26 Sep 2003 10:10:34 -0700

47 lines

New Thread

IPC-7095 BGA land szie approximation (UC)

IPC-7095 BGA land szie approximation (UC)

Lum Wee Mei <[log in to unmask]>

Wed, 24 Sep 2003 15:32:26 +0800

61 lines

New Thread

Karen Walters/USA/Skyworks is out of the office.

Karen Walters/USA/Skyworks is out of the office.

Karen Walters <[log in to unmask]>

Thu, 25 Sep 2003 17:00:51 -0400

26 lines

New Thread

Lambert PTH fatigue

Re: Lambert PTH fatigue

Werner Engelmaier <[log in to unmask]>

Wed, 3 Sep 2003 14:34:47 EDT

26 lines

Re: Lambert PTH fatigue

Leo Lambert <[log in to unmask]>

Wed, 3 Sep 2003 14:54:06 -0100

61 lines

Re: Lambert PTH fatigue

Werner Engelmaier <[log in to unmask]>

Wed, 3 Sep 2003 17:15:16 EDT

24 lines

Re: Lambert PTH fatigue

Crepeau, Phil <[log in to unmask]>

Wed, 3 Sep 2003 16:47:57 -0700

57 lines

Re: Lambert PTH fatigue

Werner Engelmaier <[log in to unmask]>

Wed, 3 Sep 2003 23:07:35 EDT

29 lines

New Thread

Large PCB fabrication

Large PCB fabrication

Eddie Rocha <[log in to unmask]>

Fri, 26 Sep 2003 11:16:13 -0700

23 lines

New Thread

Lead Free

Re: Lead Free

Dave Chapman <[log in to unmask]>

Tue, 2 Sep 2003 15:35:04 -0500

98 lines

Re: Lead Free

Peter Swanson <[log in to unmask]>

Wed, 3 Sep 2003 08:29:49 +0100

179 lines

New Thread

Lead free components

Lead free components

West, Jim <[log in to unmask]>

Wed, 24 Sep 2003 15:25:09 -0400

84 lines

Lead free components

West, Jim <[log in to unmask]>

Wed, 24 Sep 2003 15:31:52 -0400

85 lines

Re: Lead free components

Krmpotich, Mark <[log in to unmask]>

Wed, 24 Sep 2003 15:43:51 -0400

149 lines

Re: Lead free components

Karl Sauter <[log in to unmask]>

Wed, 24 Sep 2003 13:03:09 -0700

31 lines

Re: Lead free components

Guy Ramsey <[log in to unmask]>

Wed, 24 Sep 2003 16:08:56 -0400

281 lines

New Thread

Lead Free PCB's

Re: Lead Free PCB's

Dave Chapman <[log in to unmask]>

Wed, 24 Sep 2003 09:31:42 -0500

43 lines

Re: Lead Free PCB's

Yannick Brisson <[log in to unmask]>

Wed, 24 Sep 2003 10:44:08 -0400

88 lines

Re: Lead Free PCB's

Karl Sauter <[log in to unmask]>

Wed, 24 Sep 2003 11:58:35 -0700

69 lines

Re: Lead Free PCB's

Werner Engelmaier <[log in to unmask]>

Wed, 24 Sep 2003 15:01:42 EDT

26 lines

New Thread

Lead Free Solder

Lead Free Solder

Dehoyos, Ramon <[log in to unmask]>

Tue, 23 Sep 2003 12:56:24 -0700

27 lines

New Thread

LED Soldering Query

LED Soldering Query

Peter Swanson <[log in to unmask]>

Fri, 12 Sep 2003 09:56:54 +0100

48 lines

Re: LED Soldering Query

Richard Brennan <[log in to unmask]>

Fri, 12 Sep 2003 10:52:09 +0100

92 lines

Re: LED Soldering Query

Peter Swanson <[log in to unmask]>

Fri, 12 Sep 2003 11:09:30 +0100

130 lines

Re: LED Soldering Query

joyce <[log in to unmask]>

Fri, 12 Sep 2003 07:43:05 -0400

164 lines

Re: LED Soldering Query

Mike McMonagle <[log in to unmask]>

Fri, 12 Sep 2003 07:01:10 -0500

190 lines

Re: LED Soldering Query

Bev Christian <[log in to unmask]>

Fri, 12 Sep 2003 08:11:20 -0400

229 lines

Re: LED Soldering Query

Kathy Kuhlow <[log in to unmask]>

Fri, 12 Sep 2003 08:26:11 -0500

179 lines

Re: LED Soldering Query

Kasprzak, Bill (sys) USX <[log in to unmask]>

Fri, 12 Sep 2003 09:40:50 -0400

77 lines

Re: LED Soldering Query

Mike McMonagle <[log in to unmask]>

Fri, 12 Sep 2003 09:15:32 -0500

114 lines

Re: LED Soldering Query

[log in to unmask]

Fri, 12 Sep 2003 10:17:19 EDT

39 lines

Re: LED Soldering Query

Vivari, John <[log in to unmask]>

Fri, 12 Sep 2003 10:18:23 -0400

109 lines

Re: LED Soldering Query

Mike McMonagle <[log in to unmask]>

Fri, 12 Sep 2003 09:33:00 -0500

137 lines

Re: LED Soldering Query

joyce <[log in to unmask]>

Fri, 12 Sep 2003 11:50:30 -0400

149 lines

Re: LED Soldering Query

Peter Swanson <[log in to unmask]>

Sun, 14 Sep 2003 15:36:34 +0100

185 lines

Re: LED Soldering Query

Reuven ROKAH <[log in to unmask]>

Mon, 15 Sep 2003 14:43:25 +0300

96 lines

New Thread

Liquid Mask

Liquid Mask

Dobbs, Marie <[log in to unmask]>

Wed, 3 Sep 2003 14:56:48 -0400

102 lines

Re: Liquid Mask

Dehoyos, Ramon <[log in to unmask]>

Wed, 3 Sep 2003 12:36:00 -0700

74 lines

Re: Liquid Mask

Charles Caswell <[log in to unmask]>

Wed, 3 Sep 2003 14:47:12 -0500

190 lines

Re: Liquid Mask

Doug Pauls <[log in to unmask]>

Wed, 3 Sep 2003 14:46:37 -0500

45 lines

Re: Liquid Mask

Kathy Kuhlow <[log in to unmask]>

Wed, 3 Sep 2003 14:48:50 -0500

69 lines

Re: Liquid Mask

Leo Lambert <[log in to unmask]>

Wed, 3 Sep 2003 16:35:56 -0100

225 lines

Re: Liquid Mask

Reuven ROKAH <[log in to unmask]>

Thu, 4 Sep 2003 12:29:58 +0300

74 lines

Re: Liquid Mask

Brian Ellis <[log in to unmask]>

Thu, 4 Sep 2003 13:54:12 +0300

81 lines

Re: Liquid Mask

d. terstegge <[log in to unmask]>

Thu, 4 Sep 2003 13:49:51 +0200

130 lines

Re: Liquid Mask

joyce <[log in to unmask]>

Thu, 4 Sep 2003 08:13:23 -0400

160 lines

Re: Liquid Mask

Dehoyos, Ramon <[log in to unmask]>

Thu, 4 Sep 2003 05:21:02 -0700

160 lines

New Thread

looking for Fuji 8X2 feeders to fit a CP4-2

looking for Fuji 8X2 feeders to fit a CP4-2

Taylor, Royce <[log in to unmask]>

Tue, 9 Sep 2003 13:03:00 -0500

38 lines

Re: looking for Fuji 8X2 feeders to fit a CP4-2

Lakshmi Dwivedula <[log in to unmask]>

Tue, 9 Sep 2003 17:47:43 -0400

73 lines

New Thread

LTCC

LTCC

John Foster <[log in to unmask]>

Fri, 12 Sep 2003 17:38:21 -0700

28 lines

Re: LTCC

Ingemar Hernefjord (KC/EMW) <[log in to unmask]>

Mon, 15 Sep 2003 10:21:45 +0200

69 lines

Re: LTCC

Creswick, Steven <[log in to unmask]>

Mon, 15 Sep 2003 06:20:15 -0400

65 lines

Re: LTCC

John Foster <[log in to unmask]>

Tue, 16 Sep 2003 10:56:38 -0700

56 lines

New Thread

Materials Inert to Fungus and Fungus Nutrients

Materials Inert to Fungus and Fungus Nutrients

Edwin Louis <[log in to unmask]>

Wed, 3 Sep 2003 11:11:33 -0400

27 lines

Re: Materials Inert to Fungus and Fungus Nutrients

Doug Pauls <[log in to unmask]>

Wed, 3 Sep 2003 13:04:28 -0500

101 lines

New Thread

measurement systems calibration

measurement systems calibration

Sergio T. Ruiz <[log in to unmask]>

Tue, 9 Sep 2003 11:45:25 -0700

35 lines

Re: measurement systems calibration

Franklin D Asbell <[log in to unmask]>

Tue, 9 Sep 2003 11:02:11 -0500

66 lines

Re: measurement systems calibration

Sergio T. Ruiz <[log in to unmask]>

Tue, 9 Sep 2003 11:53:38 -0700

41 lines

Re: measurement systems calibration

Carroll, George <[log in to unmask]>

Tue, 9 Sep 2003 12:55:09 -0400

71 lines

New Thread

measuring the thickness of cured conformal coating

measuring the thickness of cured conformal coating

Collins Graham <[log in to unmask]>

Tue, 16 Sep 2003 15:02:07 -0400

43 lines

Re: measuring the thickness of cured conformal coating

Dehoyos, Ramon <[log in to unmask]>

Tue, 16 Sep 2003 13:17:16 -0700

77 lines

Re: measuring the thickness of cured conformal coating

[log in to unmask]

Tue, 16 Sep 2003 19:11:33 EDT

72 lines

Re: measuring the thickness of cured conformal coating

Carroll, George <[log in to unmask]>

Wed, 17 Sep 2003 08:36:48 -0400

71 lines

Re: measuring the thickness of cured conformal coating

[log in to unmask]

Wed, 17 Sep 2003 09:15:14 -0500

70 lines

Re: measuring the thickness of cured conformal coating

Shoda, Steve <[log in to unmask]>

Wed, 17 Sep 2003 17:19:22 -0400

76 lines

New Thread

MIL-P-13949 GBN

MIL-P-13949 GBN

Jim Geer <[log in to unmask]>

Thu, 4 Sep 2003 15:36:39 -0700

35 lines

Re: MIL-P-13949 GBN

David Bergman <[log in to unmask]>

Thu, 4 Sep 2003 17:57:09 -0500

63 lines

New Thread

MIL-P-55110

MIL-P-55110

Franklin D Asbell <[log in to unmask]>

Mon, 29 Sep 2003 13:39:09 -0500

28 lines

Re: MIL-P-55110

Daan Terstegge <[log in to unmask]>

Mon, 29 Sep 2003 22:11:17 +0200

70 lines

Re: MIL-P-55110

Geoff Layhe <[log in to unmask]>

Tue, 30 Sep 2003 09:02:10 +0100

61 lines

Re: MIL-P-55110

Mark Hargreaves <[log in to unmask]>

Tue, 30 Sep 2003 08:10:12 -0400

77 lines

New Thread

Mil-P-55110 versus MIL-PRF-31032

Re: Mil-P-55110 versus MIL-PRF-31032

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Wed, 3 Sep 2003 14:13:34 -0000

191 lines

New Thread

Moisture under chip capacitors

Re: Moisture under chip capacitors

Peter L. <[log in to unmask]>

Thu, 11 Sep 2003 13:50:53 -0500

129 lines

Re: Moisture under chip capacitors

joyce <[log in to unmask]>

Thu, 11 Sep 2003 15:15:05 -0400

174 lines

Re: Moisture under chip capacitors

Joseph H. Smith <[log in to unmask]>

Thu, 11 Sep 2003 12:23:04 -0700

382 lines

Re: Moisture under chip capacitors

Dehoyos, Ramon <[log in to unmask]>

Thu, 11 Sep 2003 13:13:25 -0700

174 lines

Re: Moisture under chip capacitors

Rodney Miller <[log in to unmask]>

Fri, 12 Sep 2003 09:51:31 -0500

159 lines

New Thread

More on MIL-P-13949 GBN

More on MIL-P-13949 GBN

Jim Geer <[log in to unmask]>

Fri, 5 Sep 2003 11:08:00 -0700

44 lines

New Thread

Need a specification number

Need a specification number

Kasprzak, Bill (sys) USX <[log in to unmask]>

Wed, 10 Sep 2003 13:57:03 -0400

89 lines

Re: Need a specification number

Dehoyos, Ramon <[log in to unmask]>

Wed, 10 Sep 2003 12:06:37 -0700

61 lines

New Thread

New forum on www.smtinfo.net

New forum on www.smtinfo.net

Daan Terstegge <[log in to unmask]>

Mon, 15 Sep 2003 21:23:04 +0200

81 lines

New Thread

Notices

Notices

Werner Engelmaier <[log in to unmask]>

Tue, 9 Sep 2003 10:46:14 EDT

27 lines

Re: Notices

Phil Nutting <[log in to unmask]>

Tue, 9 Sep 2003 10:49:52 -0400

52 lines

Re: Notices

[log in to unmask]

Tue, 9 Sep 2003 10:51:59 EDT

47 lines

Re: Notices

Leo Roos <[log in to unmask]>

Tue, 9 Sep 2003 06:14:46 -0700

59 lines

Re: Notices

Leigh-Ann Litavis <[log in to unmask]>

Tue, 9 Sep 2003 11:03:20 EDT

57 lines

Re: Notices

Kathy Jenczewski <[log in to unmask]>

Tue, 9 Sep 2003 09:56:10 -0500

101 lines

Re: Notices

Eric Dawson <[log in to unmask]>

Tue, 9 Sep 2003 16:06:18 +0100

57 lines

Re: Notices

Carroll, George <[log in to unmask]>

Tue, 9 Sep 2003 10:52:54 -0400

57 lines

Re: Notices

John Parsons <[log in to unmask]>

Tue, 9 Sep 2003 08:28:09 -0700

43 lines

Re: Notices

Rudy Sedlak <[log in to unmask]>

Tue, 9 Sep 2003 11:24:52 EDT

55 lines

Re: Notices

Charlie Pitarys <[log in to unmask]>

Tue, 9 Sep 2003 11:18:22 -0400

223 lines

Re: Notices

Tom Burek <[log in to unmask]>

Tue, 9 Sep 2003 11:34:59 -0400

122 lines

Re: Notices

Crepeau, Phil <[log in to unmask]>

Tue, 9 Sep 2003 08:40:15 -0700

64 lines

Re: Notices

Daan Terstegge <[log in to unmask]>

Tue, 9 Sep 2003 17:46:59 +0200

102 lines

Re: Notices

Mike Fenner <[log in to unmask]>

Tue, 9 Sep 2003 16:40:52 +0100

72 lines

Re: Notices

Brian Ellis <[log in to unmask]>

Wed, 10 Sep 2003 09:07:21 +0300

66 lines

Re: Notices

Mike Fenner <[log in to unmask]>

Wed, 10 Sep 2003 08:28:33 +0100

121 lines

New Thread

OSP vs HASL

OSP vs HASL

Victor Hernandez <[log in to unmask]>

Fri, 19 Sep 2003 14:47:00 -0500

70 lines

Re: OSP vs HASL

Franklin D Asbell <[log in to unmask]>

Fri, 19 Sep 2003 15:19:10 -0500

45 lines

Re: OSP vs HASL

Carlr Ray <[log in to unmask]>

Fri, 19 Sep 2003 15:12:04 -0500

73 lines

Re: OSP vs HASL

Franklin D Asbell <[log in to unmask]>

Fri, 19 Sep 2003 15:41:43 -0500

27 lines

Re: OSP vs HASL

[log in to unmask]

Fri, 19 Sep 2003 17:49:39 EDT

71 lines

New Thread

Pace soldering irons

Pace soldering irons

Diamond, Pat <[log in to unmask]>

Wed, 17 Sep 2003 08:32:21 +0100

51 lines

Re: Pace soldering irons

Charles Caswell <[log in to unmask]>

Wed, 17 Sep 2003 06:49:23 -0500

88 lines

Re: Pace soldering irons

Mike McMonagle <[log in to unmask]>

Wed, 17 Sep 2003 06:52:09 -0500

105 lines

New Thread

paper

paper

joyce <[log in to unmask]>

Thu, 4 Sep 2003 11:46:31 -0400

129 lines

New Thread

PCB delamination Evaluation

PCB delamination Evaluation

Victor Hernandez <[log in to unmask]>

Wed, 3 Sep 2003 11:12:05 -0500

94 lines

Re: PCB delamination Evaluation

Bev Christian <[log in to unmask]>

Wed, 3 Sep 2003 13:12:32 -0400

177 lines

Re: PCB delamination Evaluation

Victor Hernandez <[log in to unmask]>

Wed, 3 Sep 2003 12:48:16 -0500

205 lines

Re: PCB delamination Evaluation

Tom Gervascio <[log in to unmask]>

Wed, 3 Sep 2003 14:23:45 -0400

148 lines

Re: PCB delamination Evaluation

Creswick, Steven <[log in to unmask]>

Wed, 3 Sep 2003 14:34:11 -0400

309 lines

Re: PCB delamination Evaluation

Fazioli, Dan (ACLE) <[log in to unmask]>

Thu, 4 Sep 2003 08:54:12 -0600

88 lines

New Thread

PCB substrate identification markings

PCB substrate identification markings

McCall,Doug <[log in to unmask]>

Mon, 29 Sep 2003 11:05:45 +0100

43 lines

Re: PCB substrate identification markings

Geoff Layhe <[log in to unmask]>

Mon, 29 Sep 2003 11:23:55 +0100

82 lines

New Thread

pic's

pic's

Lance Mayes <[log in to unmask]>

Tue, 2 Sep 2003 15:16:06 -0400

1900 lines

Re: pic's

Tom Parkinson <[log in to unmask]>

Tue, 2 Sep 2003 15:42:28 -0400

369 lines

Re: pic's

Victor Hernandez <[log in to unmask]>

Tue, 2 Sep 2003 14:46:41 -0500

153 lines

Re: pic's

Bev Christian <[log in to unmask]>

Tue, 2 Sep 2003 15:48:21 -0400

190 lines

Re: pic's

Dave Chapman <[log in to unmask]>

Tue, 2 Sep 2003 15:01:11 -0500

147 lines

Re: pic's

Wenger, George M. <[log in to unmask]>

Tue, 2 Sep 2003 15:02:21 -0500

207 lines

Re: pic's

Carlr Ray <[log in to unmask]>

Tue, 2 Sep 2003 15:18:32 -0500

71 lines

Re: pic's

Dorothy Lush <[log in to unmask]>

Tue, 2 Sep 2003 14:21:16 -0700

183 lines

Re: pic's

Howard Watson <[log in to unmask]>

Tue, 2 Sep 2003 16:07:43 -0600

239 lines

Re: pic's

Gregg Owens <[log in to unmask]>

Tue, 2 Sep 2003 20:51:16 -0700

521 lines

Re: pic's

Werner Engelmaier <[log in to unmask]>

Wed, 3 Sep 2003 07:54:41 EDT

36 lines

Re: pic's

Bev Christian <[log in to unmask]>

Wed, 3 Sep 2003 09:01:03 -0400

108 lines

Re: pic's

Dehoyos, Ramon <[log in to unmask]>

Wed, 3 Sep 2003 07:33:25 -0700

159 lines

Re: pic's

Rodney Miller <[log in to unmask]>

Wed, 3 Sep 2003 11:37:26 -0500

164 lines

Re: pic's

Lance Mayes <[log in to unmask]>

Wed, 3 Sep 2003 11:27:32 -0600

252 lines

New Thread

Pink Ring not for space application?

Pink Ring not for space application?

Lum Wee Mei <[log in to unmask]>

Wed, 1 Oct 2003 12:40:34 +0800

35 lines

New Thread

Potential Problems with Mold Compound

Potential Problems with Mold Compound

Creswick, Steven <[log in to unmask]>

Fri, 19 Sep 2003 09:55:05 -0400

31 lines

Re: Potential Problems with Mold Compound

joyce <[log in to unmask]>

Fri, 19 Sep 2003 10:13:37 -0400

66 lines

New Thread

Preheat of ceramic chip capacitors

Preheat of ceramic chip capacitors

d. terstegge <[log in to unmask]>

Thu, 4 Sep 2003 17:32:48 +0200

46 lines

Re: Preheat of ceramic chip capacitors

Mel Parrish <[log in to unmask]>

Thu, 4 Sep 2003 11:08:10 -0500

90 lines

Re: Preheat of ceramic chip capacitors

Guy Ramsey <[log in to unmask]>

Thu, 4 Sep 2003 12:13:05 -0400

62 lines

Re: Preheat of ceramic chip capacitors

Wenger, George M. <[log in to unmask]>

Thu, 4 Sep 2003 11:13:30 -0500

95 lines

Re: Preheat of ceramic chip capacitors

John Maxwell <[log in to unmask]>

Thu, 4 Sep 2003 09:14:29 -0700

86 lines

Re: Preheat of ceramic chip capacitors

Wenger, George M. <[log in to unmask]>

Thu, 4 Sep 2003 11:25:08 -0500

133 lines

Re: Preheat of ceramic chip capacitors

joyce <[log in to unmask]>

Thu, 4 Sep 2003 12:25:22 -0400

122 lines

Re: Preheat of ceramic chip capacitors

Werner Engelmaier <[log in to unmask]>

Thu, 4 Sep 2003 13:03:54 EDT

26 lines

Re: Preheat of ceramic chip capacitors

Dave Hillman <[log in to unmask]>

Thu, 4 Sep 2003 12:20:27 -0500

190 lines

New Thread

prepreg classification

prepreg classification

Collins Graham <[log in to unmask]>

Thu, 25 Sep 2003 12:12:10 -0400

44 lines

Re: prepreg classification

Geoff Layhe <[log in to unmask]>

Thu, 25 Sep 2003 17:26:06 +0100

90 lines

Re: prepreg classification

Whittaker, Dewey (AZ75) <[log in to unmask]>

Thu, 25 Sep 2003 09:45:30 -0700

71 lines

New Thread

Probimer 77 soldermask

Probimer 77 soldermask

Charles Caswell <[log in to unmask]>

Fri, 26 Sep 2003 09:56:31 -0500

24 lines

Re: Probimer 77 soldermask

Smith, Russell (US LA) <[log in to unmask]>

Fri, 26 Sep 2003 11:50:42 -0700

56 lines

Re: Probimer 77 soldermask

Charles Caswell <[log in to unmask]>

Fri, 26 Sep 2003 14:28:57 -0500

85 lines

Re: Probimer 77 soldermask

Smith, Russell (US LA) <[log in to unmask]>

Fri, 26 Sep 2003 13:12:33 -0700

117 lines

Re: Probimer 77 soldermask

Charles Caswell <[log in to unmask]>

Mon, 29 Sep 2003 09:01:06 -0500

149 lines

Re: Probimer 77 soldermask

Smith, Russell (US LA) <[log in to unmask]>

Mon, 29 Sep 2003 09:40:44 -0700

184 lines

New Thread

PTI value

PTI value

russell(羅素) <[log in to unmask]>

Thu, 18 Sep 2003 08:58:08 +0800

38 lines

Re: PTI value

DUTTON Phil <[log in to unmask]>

Thu, 18 Sep 2003 11:13:47 +1000

66 lines

Re: PTI value

russell(羅素) <[log in to unmask]>

Thu, 18 Sep 2003 09:45:57 +0800

101 lines

Re: PTI value

DUTTON Phil <[log in to unmask]>

Thu, 18 Sep 2003 12:20:49 +1000

123 lines

Re: PTI value

russell(羅素) <[log in to unmask]>

Thu, 18 Sep 2003 10:59:09 +0800

167 lines

Re: PTI value

Dieselberg, Ron <[log in to unmask]>

Mon, 22 Sep 2003 06:35:08 -0400

72 lines

Re: PTI value

Thomas Beneken <[log in to unmask]>

Mon, 22 Sep 2003 13:43:38 +0200

198 lines

New Thread

PWB MATERIAL

PWB MATERIAL

Marsico, James <[log in to unmask]>

Wed, 24 Sep 2003 14:47:47 -0400

31 lines

New Thread

PWB repair

PWB repair

Charles Caswell <[log in to unmask]>

Fri, 26 Sep 2003 07:16:39 -0500

31 lines

Re: PWB repair

Franklin D Asbell <[log in to unmask]>

Fri, 26 Sep 2003 07:52:33 -0500

28 lines

New Thread

QFN layout designs

Re: QFN layout designs

Matthias Mansfeld <[log in to unmask]>

Fri, 5 Sep 2003 21:23:03 +0200

46 lines

New Thread

Questions on Soft gold plating.

Questions on Soft gold plating.

[log in to unmask]

Tue, 2 Sep 2003 14:03:43 EDT

67 lines

Re: Questions on Soft gold plating.

Misner, Bruce <[log in to unmask]>

Wed, 3 Sep 2003 10:59:34 -0500

126 lines

Re: Questions on Soft gold plating.

joyce <[log in to unmask]>

Wed, 3 Sep 2003 13:39:19 -0400

239 lines

New Thread

RE : [TN] PWB repair

RE : [TN] PWB repair

Eric Laroche <[log in to unmask]>

Mon, 29 Sep 2003 17:21:45 -0400

68 lines

New Thread

RE : [TN] Scanning a document and saving it as a pdf file

RE : [TN] Scanning a document and saving it as a pdf file

Eric Laroche <[log in to unmask]>

Tue, 30 Sep 2003 11:36:01 -0400

614 lines

New Thread

RE : [TN] Silicone conformal coating

RE : [TN] Silicone conformal coating

Eric Laroche <[log in to unmask]>

Thu, 4 Sep 2003 15:40:13 -0400

243 lines

New Thread

Reference book for SMT

Reference book for SMT

Crain, Bob <[log in to unmask]>

Thu, 4 Sep 2003 17:30:55 -0400

66 lines

Re: Reference book for SMT

d. terstegge <[log in to unmask]>

Fri, 5 Sep 2003 13:51:32 +0200

67 lines

New Thread

Reflow Oven SMR 400

Re: Reflow Oven SMR 400

Poh Kong Hui <[log in to unmask]>

Thu, 4 Sep 2003 17:24:28 +0800

37 lines

Re: Reflow Oven SMR 400

Morse, Carrie <[log in to unmask]>

Thu, 4 Sep 2003 11:06:47 -0400

80 lines

Re: Reflow Oven SMR 400

Neil Maloney <[log in to unmask]>

Thu, 4 Sep 2003 15:19:47 -0500

92 lines

New Thread

Reliability question

Reliability question

Ed Berti <[log in to unmask]>

Wed, 17 Sep 2003 08:51:47 -0400

56 lines

Re: Reliability question

Happy Holden <[log in to unmask]>

Wed, 17 Sep 2003 11:33:50 -0400

200 lines

Re: Reliability question

Werner Engelmaier <[log in to unmask]>

Wed, 17 Sep 2003 20:06:17 EDT

26 lines

Re: Reliability question

Joe Fjelstad <[log in to unmask]>

Wed, 17 Sep 2003 20:07:40 EDT

62 lines

Re: Reliability question

Mcmaster, Michael <[log in to unmask]>

Wed, 17 Sep 2003 17:28:11 -0700

406 lines

Re: Reliability question

Rodney Miller <[log in to unmask]>

Thu, 18 Sep 2003 10:05:30 -0500

99 lines

Re: Reliability question

Chezhian, Krishnan <[log in to unmask]>

Fri, 19 Sep 2003 15:51:22 +0800

158 lines

Re: Reliability question

Rodney Miller <[log in to unmask]>

Fri, 19 Sep 2003 08:45:20 -0500

173 lines

Re: Reliability question

Werner Engelmaier <[log in to unmask]>

Fri, 19 Sep 2003 14:37:23 EDT

34 lines

Re: Reliability question

Reuven ROKAH <[log in to unmask]>

Sun, 21 Sep 2003 14:54:32 +0300

207 lines

New Thread

resend.. controlled impedance - characteristic vs. differential

resend.. controlled impedance - characteristic vs. differential

Sergio T. Ruiz <[log in to unmask]>

Mon, 22 Sep 2003 12:15:44 -0700

58 lines

New Thread

Rework

Rework

Angela Gregor <[log in to unmask]>

Wed, 24 Sep 2003 09:03:19 -0700

25 lines

Re: Rework

Charles Caswell <[log in to unmask]>

Wed, 24 Sep 2003 08:40:52 -0500

58 lines

Re: Rework

Mel Parrish <[log in to unmask]>

Wed, 24 Sep 2003 09:08:30 -0500

66 lines

Re: Rework

Juan T. Marugán <[log in to unmask]>

Thu, 25 Sep 2003 03:44:14 -0500

20 lines

New Thread

Robert Coburn/TDI_NOTES is out of the office.

Robert Coburn/TDI_NOTES is out of the office.

Robert Coburn <[log in to unmask]>

Tue, 23 Sep 2003 01:14:45 -0400

25 lines

New Thread

Saponifier Concentration

Saponifier Concentration

Roger Cook <[log in to unmask]>

Tue, 23 Sep 2003 10:25:37 -0500

20 lines

Re: Saponifier Concentration

Brian Ellis <[log in to unmask]>

Tue, 23 Sep 2003 18:53:48 +0300

43 lines

Re: Saponifier Concentration

Guy Ramsey <[log in to unmask]>

Tue, 23 Sep 2003 13:10:35 -0400

39 lines

Re: Saponifier Concentration

Rudy Sedlak <[log in to unmask]>

Tue, 23 Sep 2003 13:13:29 EDT

97 lines

Re: Saponifier Concentration

Louis Hart <[log in to unmask]>

Tue, 23 Sep 2003 16:55:15 -0400

30 lines

Re: Saponifier Concentration

Rudy Sedlak <[log in to unmask]>

Tue, 23 Sep 2003 18:10:47 EDT

34 lines

Re: Saponifier Concentration

Brian Ellis <[log in to unmask]>

Wed, 24 Sep 2003 10:01:16 +0300

75 lines

Re: Saponifier Concentration

Tom Waznis <[log in to unmask]>

Wed, 24 Sep 2003 00:16:41 -0700

112 lines

Re: Saponifier Concentration

Charlie Pitarys <[log in to unmask]>

Wed, 24 Sep 2003 09:23:23 -0400

327 lines

Re: Saponifier Concentration

Rudy Sedlak <[log in to unmask]>

Wed, 24 Sep 2003 10:42:25 EDT

102 lines

Re: Saponifier Concentration

Dehoyos, Ramon <[log in to unmask]>

Wed, 24 Sep 2003 12:10:52 -0700

77 lines

New Thread

Saponifier Concentration II

Re: Saponifier Concentration II

Rudy Sedlak <[log in to unmask]>

Wed, 24 Sep 2003 10:47:09 EDT

64 lines

New Thread

Saponifier Concentration More than you ever wanted to kn ow..

Re: Saponifier Concentration More than you ever wanted to kn ow..

Charlie Pitarys <[log in to unmask]>

Wed, 24 Sep 2003 17:15:17 -0400

310 lines

New Thread

Saponifier Concentration More than you ever wanted to know..

Re: Saponifier Concentration More than you ever wanted to know..

Rudy Sedlak <[log in to unmask]>

Wed, 24 Sep 2003 11:02:32 EDT

75 lines

Re: Saponifier Concentration More than you ever wanted to know..

Brian Ellis <[log in to unmask]>

Wed, 24 Sep 2003 18:34:41 +0300

65 lines

Re: Saponifier Concentration More than you ever wanted to know..

Rudy Sedlak <[log in to unmask]>

Wed, 24 Sep 2003 15:47:57 EDT

72 lines

New Thread

Scanning a document and saving it as a pdf file

Scanning a document and saving it as a pdf file

Rich Lasko <[log in to unmask]>

Mon, 29 Sep 2003 13:22:05 -0500

150 lines

Re: Scanning a document and saving it as a pdf file

Jason W. Gregory <[log in to unmask]>

Mon, 29 Sep 2003 13:42:36 -0500

118 lines

Re: Scanning a document and saving it as a pdf file

Blair K. Hogg <[log in to unmask]>

Mon, 29 Sep 2003 14:40:34 -0400

58 lines

Re: Scanning a document and saving it as a pdf file

Croslin, Robert <[log in to unmask]>

Mon, 29 Sep 2003 14:54:56 -0400

186 lines

Re: Scanning a document and saving it as a pdf file

Mike McMonagle <[log in to unmask]>

Mon, 29 Sep 2003 13:59:04 -0500

211 lines

Re: Scanning a document and saving it as a pdf file

Rich Lasko <[log in to unmask]>

Mon, 29 Sep 2003 14:21:03 -0500

342 lines

Re: Scanning a document and saving it as a pdf file

Chris Robertson <[log in to unmask]>

Mon, 29 Sep 2003 14:13:18 -0500

202 lines

Re: Scanning a document and saving it as a pdf file

Fineline Circuits, Inc. <[log in to unmask]>

Tue, 30 Sep 2003 10:04:20 -0400

368 lines

Re: Scanning a document and saving it as a pdf file

Tom Waznis <[log in to unmask]>

Tue, 30 Sep 2003 08:06:56 -0700

445 lines

New Thread

Selective Edge Plating

Selective Edge Plating

Croslin, Robert <[log in to unmask]>

Fri, 26 Sep 2003 13:11:10 -0400

43 lines

Re: Selective Edge Plating

Brooks,Bill <[log in to unmask]>

Fri, 26 Sep 2003 11:01:53 -0700

71 lines

Re: Selective Edge Plating

Eddie Rocha <[log in to unmask]>

Fri, 26 Sep 2003 11:11:19 -0700

88 lines

Re: Selective Edge Plating

[log in to unmask]

Fri, 26 Sep 2003 14:16:44 EDT

57 lines

Re: Selective Edge Plating

Croslin, Robert <[log in to unmask]>

Mon, 29 Sep 2003 09:29:54 -0400

99 lines

Re: Selective Edge Plating

Brooks,Bill <[log in to unmask]>

Mon, 29 Sep 2003 09:15:03 -0700

45 lines

Re: Selective Edge Plating

Wayne Pritchett <[log in to unmask]>

Mon, 29 Sep 2003 08:08:44 -0400

63 lines

Re: Selective Edge Plating

Dehoyos, Ramon <[log in to unmask]>

Mon, 29 Sep 2003 12:12:31 -0700

57 lines

New Thread

Self Align BGAs less radiation

Self Align BGAs less radiation

Dehoyos, Ramon <[log in to unmask]>

Wed, 10 Sep 2003 10:15:52 -0700

31 lines

Re: Self Align BGAs less radiation

Dave Chapman <[log in to unmask]>

Wed, 10 Sep 2003 12:23:08 -0500

57 lines

New Thread

Silicone conformal coating

Silicone conformal coating

Steve Gregory <[log in to unmask]>

Thu, 4 Sep 2003 15:34:32 EDT

70 lines

Re: Silicone conformal coating

joyce <[log in to unmask]>

Thu, 4 Sep 2003 15:55:37 -0400

145 lines

Re: Silicone conformal coating

Alcorn, Brent <[log in to unmask]>

Thu, 4 Sep 2003 16:07:13 -0400

153 lines

Re: Silicone conformal coating

Lee Whiteman <[log in to unmask]>

Thu, 4 Sep 2003 16:31:16 -0400

194 lines

Re: Silicone conformal coating

Barmuta, Mike <[log in to unmask]>

Thu, 4 Sep 2003 13:44:40 -0700

74 lines

Re: Silicone conformal coating

Hamilton, Dudley <[log in to unmask]>

Thu, 4 Sep 2003 15:37:35 -0500

117 lines

Re: Silicone conformal coating

David Douthit <[log in to unmask]>

Thu, 4 Sep 2003 17:12:59 -0700

121 lines

Re: Silicone conformal coating

[log in to unmask]

Thu, 4 Sep 2003 22:37:44 EDT

67 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Fri, 5 Sep 2003 08:37:51 +0200

180 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Fri, 5 Sep 2003 10:01:29 +0300

87 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Fri, 5 Sep 2003 10:02:19 +0300

89 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Fri, 5 Sep 2003 10:44:28 +0200

289 lines

Re: Silicone conformal coating

Dehoyos, Ramon <[log in to unmask]>

Fri, 5 Sep 2003 07:40:24 -0700

64 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Sat, 6 Sep 2003 10:48:02 +0300

153 lines

Re: Silicone conformal coating

Steve Gregory <[log in to unmask]>

Mon, 8 Sep 2003 08:54:16 EDT

91 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Mon, 8 Sep 2003 17:08:36 +0300

85 lines

Re: Silicone conformal coating

Misner, Bruce <[log in to unmask]>

Mon, 8 Sep 2003 09:09:32 -0500

158 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Mon, 8 Sep 2003 17:31:00 +0300

103 lines

Re: Silicone conformal coating

joyce <[log in to unmask]>

Mon, 8 Sep 2003 12:24:07 -0400

148 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Tue, 9 Sep 2003 08:33:29 +0200

234 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Tue, 9 Sep 2003 14:10:24 +0300

186 lines

Re: Silicone conformal coating

joyce <[log in to unmask]>

Tue, 9 Sep 2003 07:49:31 -0400

290 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Tue, 9 Sep 2003 14:08:40 +0200

303 lines

Re: Silicone conformal coating

Brian Ellis <[log in to unmask]>

Tue, 9 Sep 2003 15:21:03 +0300

179 lines

Re: Silicone conformal coating

Dehoyos, Ramon <[log in to unmask]>

Tue, 9 Sep 2003 06:08:02 -0700

394 lines

Re: Silicone conformal coating

David Douthit <[log in to unmask]>

Tue, 9 Sep 2003 10:36:35 -0700

329 lines

Re: Silicone conformal coating

Shoda, Steve <[log in to unmask]>

Tue, 9 Sep 2003 14:50:25 -0400

552 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Wed, 10 Sep 2003 08:55:52 +0200

490 lines

Re: Silicone conformal coating

Shoda, Steve <[log in to unmask]>

Wed, 10 Sep 2003 07:34:43 -0400

545 lines

Re: Silicone conformal coating

David Douthit <[log in to unmask]>

Wed, 10 Sep 2003 06:07:36 -0700

404 lines

Re: Silicone conformal coating

Dehoyos, Ramon <[log in to unmask]>

Wed, 10 Sep 2003 06:07:33 -0700

639 lines

Re: Silicone conformal coating

David Douthit <[log in to unmask]>

Wed, 10 Sep 2003 10:56:00 -0700

664 lines

Re: Silicone conformal coating

joyce <[log in to unmask]>

Wed, 10 Sep 2003 14:25:28 -0400

900 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Thu, 11 Sep 2003 13:15:47 +0200

579 lines

Re: Silicone conformal coating

Tegehall Per-Erik <[log in to unmask]>

Fri, 12 Sep 2003 08:42:01 +0200

96 lines

Re: Silicone conformal coating

Graham Naisbitt <[log in to unmask]>

Tue, 16 Sep 2003 09:52:38 +0100

137 lines

New Thread

Silkscreen in solder pad

Silkscreen in solder pad

West, Jim <[log in to unmask]>

Wed, 24 Sep 2003 15:33:22 -0400

75 lines

Re: Silkscreen in solder pad

Franklin D Asbell <[log in to unmask]>

Wed, 24 Sep 2003 15:01:08 -0500

33 lines

Re: Silkscreen in solder pad

Guy Ramsey <[log in to unmask]>

Wed, 24 Sep 2003 16:22:32 -0400

140 lines

Re: Silkscreen in solder pad

Black, Paul <[log in to unmask]>

Wed, 24 Sep 2003 16:34:23 -0400

63 lines

Re: Silkscreen in solder pad

Franklin D Asbell <[log in to unmask]>

Wed, 24 Sep 2003 16:05:44 -0500

24 lines

Re: Silkscreen in solder pad

Hal Winslow <[log in to unmask]>

Wed, 24 Sep 2003 17:05:12 -0400

52 lines

Re: Silkscreen in solder pad

Guy Ramsey <[log in to unmask]>

Thu, 25 Sep 2003 08:56:58 -0400

185 lines

Re: Silkscreen in solder pad

Guy Ramsey <[log in to unmask]>

Thu, 25 Sep 2003 12:05:59 -0400

221 lines

Re: Silkscreen in solder pad

Franklin D Asbell <[log in to unmask]>

Thu, 25 Sep 2003 13:37:01 -0500

23 lines

New Thread

Silver Immersion right for fine pitch?

Silver Immersion right for fine pitch?

Brooks,Bill <[log in to unmask]>

Thu, 25 Sep 2003 13:08:15 -0700

36 lines

Re: Silver Immersion right for fine pitch?

Krmpotich, Mark <[log in to unmask]>

Thu, 25 Sep 2003 16:33:08 -0400

231 lines

Re: Silver Immersion right for fine pitch?

Lakshmi Dwivedula <[log in to unmask]>

Thu, 25 Sep 2003 21:24:13 -0400

271 lines

Re: Silver Immersion right for fine pitch?

[log in to unmask]

Thu, 25 Sep 2003 23:13:28 EDT

30 lines

Re: Silver Immersion right for fine pitch?

Dave Chapman <[log in to unmask]>

Fri, 26 Sep 2003 06:52:12 -0500

84 lines

New Thread

Software package validation

Software package validation

Reid, Lorraine <[log in to unmask]>

Tue, 23 Sep 2003 09:54:17 +0100

89 lines

Re: Software package validation

Mark Austin <[log in to unmask]>

Tue, 23 Sep 2003 11:15:00 +0100

76 lines

New Thread

Solder Balls

Solder Balls

Black, Paul <[log in to unmask]>

Wed, 24 Sep 2003 07:57:24 -0400

91 lines

Re: Solder Balls

Bev Christian <[log in to unmask]>

Wed, 24 Sep 2003 08:05:59 -0400

194 lines

Re: Solder Balls

joyce <[log in to unmask]>

Wed, 24 Sep 2003 08:09:18 -0400

275 lines

Re: Solder Balls

Tony Steinke <[log in to unmask]>

Wed, 24 Sep 2003 09:03:24 -0400

198 lines

Re: Solder Balls

Steve Gregory <[log in to unmask]>

Wed, 24 Sep 2003 09:13:16 EDT

141 lines

Re: Solder Balls

Black, Paul <[log in to unmask]>

Wed, 24 Sep 2003 09:53:05 -0400

234 lines

Re: Solder Balls

Sherif Refaat <[log in to unmask]>

Wed, 24 Sep 2003 10:14:28 -0400

409 lines

Re: Solder Balls

Leo Roos <[log in to unmask]>

Wed, 24 Sep 2003 08:29:36 -0700

218 lines

Re: Solder Balls

Reuven ROKAH <[log in to unmask]>

Thu, 25 Sep 2003 08:08:07 +0300

96 lines

Re: Solder Balls

Chezhian, Krishnan <[log in to unmask]>

Thu, 25 Sep 2003 13:22:56 +0800

150 lines

Re: Solder Balls

Black, Paul <[log in to unmask]>

Thu, 25 Sep 2003 09:25:21 -0400

187 lines

Re: Solder Balls

Carlr Ray <[log in to unmask]>

Thu, 25 Sep 2003 17:54:30 -0500

77 lines

Re: Solder Balls

Black, Paul <[log in to unmask]>

Fri, 26 Sep 2003 08:01:35 -0400

114 lines

New Thread

Solder balls under parts

Solder balls under parts

Crain, Bob <[log in to unmask]>

Tue, 2 Sep 2003 13:54:33 -0400

82 lines

Re: Solder balls under parts

Morse, Carrie <[log in to unmask]>

Tue, 2 Sep 2003 14:06:16 -0400

196 lines

New Thread

Solder shorts defects in the passives components at the solder side in double side board through the wave solder

Solder shorts defects in the passives components at the solder side in double side board through the wave solder

D_bonilla <[log in to unmask]>

Fri, 19 Sep 2003 16:35:37 -0400

28 lines

Re: Solder shorts defects in the passives components at the solder side in double side board through the wave solder

Dehoyos, Ramon <[log in to unmask]>

Mon, 22 Sep 2003 09:49:40 -0700

61 lines

New Thread

Solderability Testing

Re: Solderability Testing

Guy Ramsey <[log in to unmask]>

Wed, 17 Sep 2003 11:35:50 -0400

104 lines

New Thread

Soldering Iron Analyzers

Soldering Iron Analyzers

Blair K. Hogg <[log in to unmask]>

Tue, 16 Sep 2003 09:32:25 -0400

47 lines

Re: Soldering Iron Analyzers

Cal Driscoll <[log in to unmask]>

Tue, 16 Sep 2003 10:09:54 -0400

82 lines

Re: Soldering Iron Analyzers

Charles Caswell <[log in to unmask]>

Tue, 16 Sep 2003 09:22:01 -0500

72 lines

Re: Soldering Iron Analyzers

[log in to unmask]

Tue, 16 Sep 2003 19:19:28 EDT

66 lines

Re: Soldering Iron Analyzers

Juan T. Marugán <[log in to unmask]>

Wed, 17 Sep 2003 01:54:28 -0500

31 lines

New Thread

Spec question

Spec question

panch <[log in to unmask]>

Wed, 24 Sep 2003 16:54:13 -0700

77 lines

Re: Spec question

Crepeau, Phil <[log in to unmask]>

Thu, 25 Sep 2003 07:17:58 -0700

160 lines

Re: Spec question

Jeff Seeger <[log in to unmask]>

Thu, 25 Sep 2003 11:21:59 -0400

41 lines

Re: Spec question

Graham Naisbitt <[log in to unmask]>

Thu, 25 Sep 2003 16:44:51 +0100

77 lines

Re: Spec question

Jeff Seeger <[log in to unmask]>

Thu, 25 Sep 2003 11:53:07 -0400

37 lines

New Thread

Speedboard Experience

Speedboard Experience

Bruce Wilson <[log in to unmask]>

Wed, 17 Sep 2003 15:10:12 -0700

84 lines

Re: Speedboard Experience

Mcmaster, Michael <[log in to unmask]>

Wed, 17 Sep 2003 16:59:40 -0700

178 lines

Re: Speedboard Experience

George Franck <[log in to unmask]>

Thu, 18 Sep 2003 08:19:04 -0400

248 lines

New Thread

spray nozzle configuration for etching

spray nozzle configuration for etching

Adam Seychell <[log in to unmask]>

Wed, 1 Oct 2003 15:10:25 +1000

40 lines

New Thread

Static sensitive components

Static sensitive components

Eric Laroche <[log in to unmask]>

Thu, 4 Sep 2003 09:26:00 -0400

182 lines

Re: Static sensitive components

Carl VanWormer <[log in to unmask]>

Thu, 4 Sep 2003 07:08:43 -0700

212 lines

Re: Static sensitive components

Guy Ramsey <[log in to unmask]>

Thu, 4 Sep 2003 11:42:39 -0400

206 lines

New Thread

stencil

Re: stencil

Dave Chapman <[log in to unmask]>

Fri, 5 Sep 2003 06:41:03 -0500

74 lines

Re: stencil

Mike McMonagle <[log in to unmask]>

Fri, 5 Sep 2003 07:09:20 -0500

110 lines

Re: stencil

Dave Chapman <[log in to unmask]>

Fri, 5 Sep 2003 07:15:36 -0500

137 lines

Re: stencil

Jason W. Gregory <[log in to unmask]>

Fri, 5 Sep 2003 07:33:45 -0500

148 lines

Re: stencil

Carlr Ray <[log in to unmask]>

Fri, 5 Sep 2003 08:28:42 -0500

141 lines

Re: stencil

Cagle, James <[log in to unmask]>

Fri, 5 Sep 2003 10:37:00 -0400

110 lines

Re: stencil

Coleman, Bill <[log in to unmask]>

Fri, 5 Sep 2003 10:40:06 -0600

136 lines

New Thread

Strange part cracking...

Strange part cracking...

Steve Gregory <[log in to unmask]>

Tue, 16 Sep 2003 12:02:31 EDT

95 lines

Re: Strange part cracking...

Guy Ramsey <[log in to unmask]>

Tue, 16 Sep 2003 13:37:05 -0400

152 lines

Re: Strange part cracking...

Morse, Carrie <[log in to unmask]>

Tue, 16 Sep 2003 13:40:33 -0400

198 lines

Re: Strange part cracking...

Steve Gregory <[log in to unmask]>

Tue, 16 Sep 2003 13:43:00 EDT

84 lines

Re: Strange part cracking...

David Douthit <[log in to unmask]>

Tue, 16 Sep 2003 17:42:11 -0700

138 lines

Re: Strange part cracking...

Steve Gregory <[log in to unmask]>

Tue, 16 Sep 2003 20:48:37 EDT

97 lines

Re: Strange part cracking...

David Douthit <[log in to unmask]>

Tue, 16 Sep 2003 20:16:20 -0700

189 lines

New Thread

Termination material

Re: Termination material

Werner Engelmaier <[log in to unmask]>

Mon, 1 Sep 2003 15:02:26 EDT

42 lines

Re: Termination material

H. Molema <[log in to unmask]>

Tue, 2 Sep 2003 11:39:36 +0200

86 lines

Re: Termination material

[log in to unmask]

Fri, 5 Sep 2003 18:07:27 EDT

132 lines

New Thread

Tolerances

Tolerances

Kathy Kuhlow <[log in to unmask]>

Thu, 18 Sep 2003 10:28:52 -0500

83 lines

Re: Tolerances

Brian Ellis <[log in to unmask]>

Thu, 18 Sep 2003 18:44:25 +0300

54 lines

Re: Tolerances

Chris Robertson <[log in to unmask]>

Thu, 18 Sep 2003 10:45:21 -0500

147 lines

Re: Tolerances

Mike McMonagle <[log in to unmask]>

Thu, 18 Sep 2003 10:59:20 -0500

91 lines

Re: Tolerances

Joe Fjelstad <[log in to unmask]>

Thu, 18 Sep 2003 12:04:27 EDT

54 lines

Re: Tolerances

Franklin D Asbell <[log in to unmask]>

Thu, 18 Sep 2003 11:31:57 -0500

77 lines

Re: Tolerances

Valerie St.Cyr <[log in to unmask]>

Thu, 18 Sep 2003 13:20:41 -0400

160 lines

New Thread

Training

Re: Training

Dieselberg, Ron <[log in to unmask]>

Tue, 2 Sep 2003 06:41:02 -0400

90 lines

Re: Training

Marsico, James <[log in to unmask]>

Tue, 2 Sep 2003 07:48:34 -0400

97 lines

Re: Training

Dobbs, Marie <[log in to unmask]>

Tue, 2 Sep 2003 08:30:31 -0400

144 lines

Re: Training

Dieselberg, Ron <[log in to unmask]>

Tue, 2 Sep 2003 09:23:00 -0400

147 lines

Re: Training

Blair K. Hogg <[log in to unmask]>

Tue, 2 Sep 2003 14:35:01 -0400

169 lines

New Thread

Vacuum Furnace

Vacuum Furnace

Guy Ramsey <[log in to unmask]>

Fri, 12 Sep 2003 14:21:56 -0400

33 lines

Re: Vacuum Furnace

Creswick, Steven <[log in to unmask]>

Fri, 12 Sep 2003 14:57:19 -0400

86 lines

New Thread

Vibration specs

Vibration specs

Bill Sullivan <[log in to unmask]>

Fri, 12 Sep 2003 13:48:34 -0700

30 lines

New Thread

Vibration testing

Re: Vibration testing

Ross K. Wilcoxon <[log in to unmask]>

Tue, 2 Sep 2003 08:15:44 -0500

112 lines

Re: Vibration testing

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Wed, 3 Sep 2003 13:10:19 -0000

138 lines

New Thread

Virus SOBIG etc., was: [TN] Notices

Virus SOBIG etc., was: [TN] Notices

Matthias Mansfeld <[log in to unmask]>

Tue, 9 Sep 2003 17:31:34 +0200

56 lines

New Thread

warp heatsink

warp heatsink

ricky <[log in to unmask]>

Fri, 19 Sep 2003 19:03:54 -0500

22 lines

Re: warp heatsink

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Mon, 22 Sep 2003 12:44:55 -0000

54 lines

New Thread

Where is Mike Fitts?

Where is Mike Fitts?

Roger Stoops <[log in to unmask]>

Thu, 11 Sep 2003 09:49:32 -0400

30 lines

Re: Where is Mike Fitts?

David Bergman <[log in to unmask]>

Thu, 11 Sep 2003 08:55:17 -0500

57 lines

Re: Where is Mike Fitts?

Happy Holden <[log in to unmask]>

Thu, 11 Sep 2003 10:02:53 -0400

45 lines

New Thread

Wire Crimp Terminals Plating (Sn)

Wire Crimp Terminals Plating (Sn)

Victor Hernandez <[log in to unmask]>

Tue, 23 Sep 2003 07:05:14 -0500

76 lines

Re: Wire Crimp Terminals Plating (Sn)

David Douthit <[log in to unmask]>

Tue, 23 Sep 2003 05:35:22 -0700

111 lines

New Thread

Xray laminography source

Xray laminography source

[log in to unmask]

Tue, 2 Sep 2003 11:17:34 -0400

32 lines

New Thread

Zinc Plating Finish

Zinc Plating Finish

Victor Hernandez <[log in to unmask]>

Thu, 11 Sep 2003 10:26:40 -0500

79 lines

Re: Zinc Plating Finish

Steve Gregory <[log in to unmask]>

Thu, 11 Sep 2003 12:16:41 EDT

106 lines

Re: Zinc Plating Finish

Dave Hillman <[log in to unmask]>

Thu, 11 Sep 2003 11:35:40 -0500

97 lines

Re: Zinc Plating Finish

Frank L Norman <[log in to unmask]>

Thu, 11 Sep 2003 09:48:22 -0700

137 lines

Re: Zinc Plating Finish

David Douthit <[log in to unmask]>

Thu, 11 Sep 2003 10:09:45 -0700

116 lines

Re: Zinc Plating Finish

joyce <[log in to unmask]>

Thu, 11 Sep 2003 12:56:51 -0400

137 lines

Re: Zinc Plating Finish

Dave Hillman <[log in to unmask]>

Thu, 11 Sep 2003 12:11:46 -0500

163 lines

Re: Zinc Plating Finish

joyce <[log in to unmask]>

Thu, 11 Sep 2003 13:33:59 -0400

215 lines

Re: Zinc Plating Finish

Dave Hillman <[log in to unmask]>

Thu, 11 Sep 2003 13:15:12 -0500

241 lines

Re: Zinc Plating Finish

Jack Crawford <[log in to unmask]>

Fri, 12 Sep 2003 09:37:16 -0500

137 lines

Re: Zinc Plating Finish

Jay Brusse <[log in to unmask]>

Sat, 13 Sep 2003 01:55:40 +0000

119 lines

Re: Zinc Plating Finish

Dave Hillman <[log in to unmask]>

Tue, 16 Sep 2003 09:21:42 -0500

200 lines

Re: Zinc Plating Finish

joyce <[log in to unmask]>

Tue, 16 Sep 2003 11:27:01 -0400

208 lines

New Thread

Zinc Plating Finish(3)

Re: Zinc Plating Finish(3)

Victor Hernandez <[log in to unmask]>

Fri, 12 Sep 2003 07:20:39 -0500

126 lines

New Thread

[NTC] Looking under BGA

Re: [NTC] Looking under BGA

Rodney Miller <[log in to unmask]>

Tue, 2 Sep 2003 08:51:03 -0500

91 lines

Re: [NTC] Looking under BGA

Victor Hernandez <[log in to unmask]>

Tue, 2 Sep 2003 09:25:41 -0500

114 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager