LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


March 2003


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

.13 bulk FSG vs. low-k SiLK (1 message)
0402 inch - mm ? (9 messages)
10 mil Mylar (2 messages)
2.3mm thick PCB and BGA (5 messages)
: rework or removal of SOT649A (2 messages)
: Shining smooth solder joint on ENIG or Gold plating Board. (6 messages)
<No subject> (1 message)
Adhesion without oxide? (3 messages)
Adhesive bonding for ferrite cores (6 messages)
An apology... (3 messages)
Anybody worked with Tra Bond 2112? (1 message)
Aperture Data (9 messages)
APEX food review (2 messages)
AT&T spray fluxer parts (1 message)
Bar Solder (1 message)
Bare board CofC (3 messages)
BGA reballing (2 messages)
BGA vs. QFP (4 messages)
BGA's on both sides of an assembly (12 messages)
Black Contamination (4 messages)
Black Oxide (5 messages)
Board Markers (9 messages)
Board Shop Audit (9 messages)
cam outsourcing.. (2 messages)
Can ICs (2 messages)
Class 3 Board Rework - Lifted Pads/Lands (3 messages)
component lead plating/tinning (7 messages)
Computer Monitors and ESD (7 messages)
Coplanarit of BGA (2 messages)
Cracking Capacitors (7 messages)
Depaneling Tools (1 message)
Depanelizing Long V-scored PCB (1 message)
Documentation numbering system (2 messages)
Electroless Gold Industry Standard (3 messages)
ESD Survey (5 messages)
excess copper at etch (3 messages)
Excess Flux (2 messages)
exhausting a wave solder machine (9 messages)
Files with *.PCB Extension... (14 messages)
Finger cots/Gloves/nothing? (10 messages)
Finish and material (2 messages)
First Pass Yields (8 messages)
Flex circuit covercoat question (5 messages)
Flux Contamination Testing (10 messages)
FR-4 outgassing (3 messages)
FR4 Cold temp profile (1 message)
Future 1 solder machine (3 messages)
FW: production shifts from Western Europe to Eastern Europe and A sia. (3 messages)
FW: [TN] Depaneling Tools (1 message)
FW: [TN] NTC first pass yield , No technical content (2 messages)
FW: [TN] TCE above Tg for Dupont CB100 silver resin (7 messages)
Gerber data (2 messages)
gerber viewers.. (4 messages)
gerber viewers.. - DRC capabilities (1 message)
German Silver (10 messages)
Glue suppliers for chip-on-wave assembly (5 messages)
Gold Tarnish. (3 messages)
Hakko Hot Air Rework Equipment (Model 850) (3 messages)
handsome side filler photo needed (1 message)
handsome side fillet photo needed (1 message)
Heat transfer from ENIG board to aluminium casing (10 messages)
How to hold component in socket (15 messages)
HTML (3 messages)
Humidity Chart Recorders (5 messages)
info requested (5 messages)
Ionic Equivalence (1 message)
IPC Printed Circuits Expo - Important Information From Show Management (1 message)
IPC Revamps Web Site www.ipc.org (1 message)
IPC SMEMA Council APEX - Important Information From Show Management (1 message)
IPC Solder Paste Tack Testing (2 messages)
IPC Test Board (1 message)
IPC-7721 Conformance Levels (8 messages)
Iron for Electrolytic Copper Plating (4 messages)
Is anyone going to Apex? (17 messages)
J-Std-001B (1 message)
Kester Solder-Nu replacement (6 messages)
Laminate voids & resin recession (5 messages)
Leadfree alloy supplier (3 messages)
LGA Processing (1 message)
Looking for X-Ray service (3 messages)
material data pink bubble wrap (3 messages)
Material for fabrication of PCB for Smart Card applicati on. (1 message)
Material for fabrication of PCB for Smart Card application. (1 message)
Mercury Free Cert (13 messages)
Mixing fluxes - documentation vacuum (14 messages)
Mixing fluxes - more (6 messages)
Mixing fluxes - very little TechContent (1 message)
Mouse bites on inner layers (1 message)
Mousebites on innerlayers (5 messages)
Mousebites on innerlayers--YES (1 message)
New IPC Webite (4 messages)
new website (1 message)
non functional pad removal (17 messages)
non functional pads (1 message)
Non HTML version of list? (8 messages)
Non HTML version of list? NTC (1 message)
Non-HTML Version of List (1 message)
NTC first pass yield (1 message)
NTC first pass yield , No technical content (3 messages)
NTC, A tribute... (5 messages)
Ozone usage limitations (5 messages)
Panasonic Film Chip Capacitors and SMT Reflow (10 messages)
PC Board thickness measurement (7 messages)
PCB thickness vs Hole side ( ASPECT Rratio ) (4 messages)
Picture of PWB delamination (3 messages)
Plastic (8 messages)
PLCC socket removal (5 messages)
Probimer 65 - Probimer 77 (2 messages)
Problem of delamination with a silver filled board (4 messages)
Properties of copper foil (3 messages)
PTH clearance between pad and gnd plane (6 messages)
QTA becomes a CLEAN Machine! (2 messages)
Question about crimping (6 messages)
Recycling (2 messages)
reliabillity standards (1 message)
Renewal notice on Technet (2 messages)
Repairing (3 messages)
Report card (1 message)
Request for help ESD Simulator. (1 message)
Roller Tinned PCB's (7 messages)
Screwing in place fine-pitch SMT connectors (5 messages)
Set TechNet NOMAIL (1 message)
shelf life of spare parts - electronic units (7 messages)
Silver Fill Plugged Vias / Gold Body (5 messages)
Smoke damage to electronic assemblies (12 messages)
SMT Component Standoffs (9 messages)
Sn97Cu3 solder (2 messages)
Solder analysis for 63/37 (11 messages)
Solder ball composition (7 messages)
Solder Paste with 0.4% silver (3 messages)
Solvents document (1 message)
Splicing 8mm SMT tape (1 message)
Squeegee blades for printers (13 messages)
T&E testing at high temp (1 message)
TCE above Tg for Dupont CB100 silver resin (3 messages)
Technical Conference for IPC Printed Circuits Expo 2003 (1 message)
test (1 message)
Test coupon for Impedance Control Board. (6 messages)
testing Procedures for ESD ground mats (3 messages)
Thanks to those who offered advice on smoke damage (3 messages)
The relations between mulit-layers and thermal transition (1 message)
tin stripping (3 messages)
tined wire with insulated lug (4 messages)
Tinning requirements (2 messages)
Torque Testers (3 messages)
Trace Current Capacity w/ Occasional Spikes (1 message)
Ultrasonic Cleaning of Black Anodized Parts? (11 messages)
Underfill BGA on Backplane? (1 message)
Via Fill and Soldermask (10 messages)
Void (2 messages)
Welcome (5 messages)
Wirebonding (2 messages)
Wirebonding Plating (2 messages)
Zebra Printer Labels (3 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Brian Ellis <[log in to unmask]>

Thu, 20 Mar 2003 13:25:28 +0200

60 lines

Re:

Hernandez, Victor G <[log in to unmask]>

Thu, 20 Mar 2003 05:37:10 -0600

65 lines

Re:

Smith, Russell (US LA) <[log in to unmask]>

Fri, 21 Mar 2003 08:35:07 -0800

112 lines

New Thread

.13 bulk FSG vs. low-k SiLK

.13 bulk FSG vs. low-k SiLK

Grabski III, John R. <[log in to unmask]>

Wed, 26 Mar 2003 07:25:17 -0500

31 lines

New Thread

0402 inch - mm ?

0402 inch - mm ?

Zweigart, Siegmund <[log in to unmask]>

Tue, 4 Mar 2003 13:54:46 +0100

29 lines

Re: 0402 inch - mm ?

Geoff Layhe <[log in to unmask]>

Tue, 4 Mar 2003 13:14:37 -0000

66 lines

Re: 0402 inch - mm ?

Steve Gregory <[log in to unmask]>

Tue, 4 Mar 2003 08:48:09 EST

85 lines

Re: 0402 inch - mm ?

Bloomquist, Ken <[log in to unmask]>

Tue, 4 Mar 2003 05:54:58 -0800

92 lines

Re: 0402 inch - mm ?

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 4 Mar 2003 09:15:02 -0500

60 lines

Re: 0402 inch - mm ?

Eric Christison <[log in to unmask]>

Tue, 4 Mar 2003 13:11:17 +0000

66 lines

Re: 0402 inch - mm ?

Macko, Joe @ IEC <[log in to unmask]>

Tue, 4 Mar 2003 09:08:28 -0800

91 lines

Re: 0402 inch - mm ?

Debbie Goodwin <[log in to unmask]>

Tue, 4 Mar 2003 09:09:10 -0800

87 lines

Re: 0402 inch - mm ?

Roger Stoops <[log in to unmask]>

Tue, 4 Mar 2003 12:31:20 -0500

105 lines

New Thread

10 mil Mylar

10 mil Mylar

David Bergman <[log in to unmask]>

Thu, 20 Mar 2003 11:02:31 -0600

41 lines

Re: 10 mil Mylar

Franklin D Asbell <[log in to unmask]>

Thu, 20 Mar 2003 11:29:56 -0600

69 lines

New Thread

2.3mm thick PCB and BGA

2.3mm thick PCB and BGA

ME Magnin <[log in to unmask]>

Fri, 14 Mar 2003 08:45:05 +0100

62 lines

Re: 2.3mm thick PCB and BGA

[log in to unmask]

Fri, 14 Mar 2003 17:33:24 +0800

158 lines

Re: 2.3mm thick PCB and BGA

Marie-Elisabeth MAGNIN <[log in to unmask]>

Fri, 14 Mar 2003 11:01:55 +0100

39 lines

Re: 2.3mm thick PCB and BGA

Jowan Iven <[log in to unmask]>

Fri, 14 Mar 2003 11:40:05 +0100

87 lines

Re: 2.3mm thick PCB and BGA

Mcmaster, Michael <[log in to unmask]>

Fri, 14 Mar 2003 17:10:26 -0800

241 lines

New Thread

: rework or removal of SOT649A

: rework or removal of SOT649A

pohkh <[log in to unmask]>

Tue, 11 Mar 2003 17:57:10 +0800

36 lines

Re: : rework or removal of SOT649A

Zweigart, Siegmund <[log in to unmask]>

Tue, 11 Mar 2003 11:01:24 +0100

70 lines

New Thread

: Shining smooth solder joint on ENIG or Gold plating Board.

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Sasha Miladinovic <[log in to unmask]>

Wed, 12 Mar 2003 15:40:50 +0100

191 lines

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Poh Kong Hui <[log in to unmask]>

Fri, 14 Mar 2003 06:20:07 +0800

189 lines

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Poh Kong Hui <[log in to unmask]>

Fri, 14 Mar 2003 06:29:23 +0800

119 lines

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

DUTTON Phil <[log in to unmask]>

Fri, 14 Mar 2003 09:58:02 +1100

50 lines

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

Mike Fenner <[log in to unmask]>

Fri, 14 Mar 2003 09:58:33 -0000

99 lines

Re: : Shining smooth solder joint on ENIG or Gold plating Board.

joyce <[log in to unmask]>

Fri, 14 Mar 2003 08:30:33 -0500

172 lines

New Thread

<No subject>

<No subject>

Rey Degollado <[log in to unmask]>

Thu, 20 Mar 2003 18:27:14 +0800

36 lines

New Thread

Adhesion without oxide?

Adhesion without oxide?

Mike Wolf <[log in to unmask]>

Thu, 20 Mar 2003 07:53:31 -0500

36 lines

Re: Adhesion without oxide?

Dougal Stewart <[log in to unmask]>

Thu, 20 Mar 2003 13:08:06 -0000

68 lines

Re: Adhesion without oxide?

Quality <[log in to unmask]>

Thu, 20 Mar 2003 16:31:27 -0500

60 lines

New Thread

Adhesive bonding for ferrite cores

Adhesive bonding for ferrite cores

Shoda, Steve <[log in to unmask]>

Thu, 20 Mar 2003 17:00:07 -0500

41 lines

Re: Adhesive bonding for ferrite cores

David Fish <[log in to unmask]>

Thu, 20 Mar 2003 17:24:34 -0500

65 lines

Re: Adhesive bonding for ferrite cores

Brian Ellis <[log in to unmask]>

Fri, 21 Mar 2003 11:35:52 +0200

65 lines

Re: Adhesive bonding for ferrite cores

Phil Nutting <[log in to unmask]>

Fri, 21 Mar 2003 08:48:53 -0500

85 lines

Re: Adhesive bonding for ferrite cores

Peter Swanson <[log in to unmask]>

Tue, 25 Mar 2003 08:49:34 -0000

112 lines

Re: Adhesive bonding for ferrite cores

Shoda, Steve <[log in to unmask]>

Tue, 25 Mar 2003 16:27:33 -0500

136 lines

New Thread

An apology...

An apology...

Steve Gregory <[log in to unmask]>

Fri, 28 Mar 2003 18:21:23 EST

62 lines

Re: An apology...

Carlr Ray <[log in to unmask]>

Fri, 28 Mar 2003 17:41:02 -0600

62 lines

Re: An apology...

Roland Jaquet <[log in to unmask]>

Sat, 29 Mar 2003 01:44:33 +0100

240 lines

New Thread

Anybody worked with Tra Bond 2112?

Anybody worked with Tra Bond 2112?

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Wed, 12 Mar 2003 21:48:48 -0000

38 lines

New Thread

Aperture Data

Aperture Data

Andre Leclair <[log in to unmask]>

Tue, 11 Mar 2003 06:54:33 -0600

45 lines

Re: Aperture Data

Bill Decray <[log in to unmask]>

Tue, 11 Mar 2003 08:21:13 -0500

89 lines

Re: Aperture Data

Crepeau, Phil <[log in to unmask]>

Tue, 11 Mar 2003 07:09:34 -0800

27 lines

Re: Aperture Data

Eric Dawson <[log in to unmask]>

Tue, 11 Mar 2003 15:45:23 -0000

54 lines

Re: Aperture Data

Ahne Oosterhof <[log in to unmask]>

Tue, 11 Mar 2003 08:25:32 -0800

102 lines

Re: Aperture Data

John Parsons <[log in to unmask]>

Tue, 11 Mar 2003 08:51:50 -0800

40 lines

Re: Aperture Data

David Ricketts <[log in to unmask]>

Tue, 11 Mar 2003 12:46:42 -0800

100 lines

Re: Aperture Data

[log in to unmask]

Wed, 12 Mar 2003 08:28:13 +0800

104 lines

Re: Aperture Data

Andre Leclair <[log in to unmask]>

Wed, 12 Mar 2003 06:42:08 -0600

35 lines

New Thread

APEX food review

APEX food review

Ed Popielarski <[log in to unmask]>

Sun, 16 Mar 2003 18:10:07 -0800

205 lines

Re: APEX food review

Steve Gregory <[log in to unmask]>

Mon, 17 Mar 2003 11:36:00 EST

259 lines

New Thread

AT&T spray fluxer parts

Re: AT&T spray fluxer parts

Dave Chapman <[log in to unmask]>

Thu, 27 Mar 2003 14:05:48 -0600

107 lines

New Thread

Bar Solder

Bar Solder

Dave Chapman <[log in to unmask]>

Fri, 21 Mar 2003 15:47:50 -0600

46 lines

New Thread

Bare board CofC

Bare board CofC

Mark Hargreaves <[log in to unmask]>

Wed, 12 Mar 2003 08:15:51 -0500

43 lines

Re: Bare board CofC

Steve MacDonald <[log in to unmask]>

Wed, 12 Mar 2003 09:23:28 -0500

109 lines

Re: Bare board CofC

Mcmaster, Michael <[log in to unmask]>

Wed, 12 Mar 2003 14:41:19 -0800

264 lines

New Thread

BGA reballing

Re: BGA reballing

Phil Bavaro <[log in to unmask]>

Tue, 18 Mar 2003 10:17:35 -0800

122 lines

Re: BGA reballing

Mel Parrish <[log in to unmask]>

Tue, 18 Mar 2003 16:33:18 -0600

164 lines

New Thread

BGA vs. QFP

BGA vs. QFP

Black, Paul <[log in to unmask]>

Thu, 6 Mar 2003 18:22:36 -0500

79 lines

Re: BGA vs. QFP

[log in to unmask]

Fri, 7 Mar 2003 10:28:05 +0800

104 lines

Re: BGA vs. QFP

Joe Fjelstad <[log in to unmask]>

Thu, 6 Mar 2003 21:33:11 EST

66 lines

Re: BGA vs. QFP

Jowan Iven <[log in to unmask]>

Fri, 7 Mar 2003 08:38:53 +0100

238 lines

New Thread

BGA's on both sides of an assembly

BGA's on both sides of an assembly

john Belcher <[log in to unmask]>

Mon, 31 Mar 2003 09:57:13 -0600

19 lines

Re: BGA's on both sides of an assembly

joyce <[log in to unmask]>

Mon, 31 Mar 2003 11:25:37 -0500

51 lines

Re: BGA's on both sides of an assembly

Zweigart, Siegmund <[log in to unmask]>

Mon, 31 Mar 2003 18:45:35 +0200

53 lines

Re: BGA's on both sides of an assembly

John Belcher <[log in to unmask]>

Mon, 31 Mar 2003 08:43:00 -0800

72 lines

Re: BGA's on both sides of an assembly

Dehoyos, Ramon <[log in to unmask]>

Mon, 31 Mar 2003 11:12:57 -0800

99 lines

Re: BGA's on both sides of an assembly

John Belcher <[log in to unmask]>

Mon, 31 Mar 2003 11:28:37 -0800

106 lines

Re: BGA's on both sides of an assembly

Daan Terstegge <[log in to unmask]>

Mon, 31 Mar 2003 21:45:59 +0200

150 lines

Re: BGA's on both sides of an assembly

Paul <[log in to unmask]>

Mon, 31 Mar 2003 16:05:08 -0500

109 lines

Re: BGA's on both sides of an assembly

Steve Gregory <[log in to unmask]>

Mon, 31 Mar 2003 16:49:48 EST

137 lines

Re: BGA's on both sides of an assembly

Dan R. Johnson <[log in to unmask]>

Mon, 31 Mar 2003 14:04:47 -0800

62 lines

Re: BGA's on both sides of an assembly

joyce <[log in to unmask]>

Mon, 31 Mar 2003 17:07:31 -0500

509 lines

Re: BGA's on both sides of an assembly

[log in to unmask]

Tue, 1 Apr 2003 07:34:03 +0800

69 lines

New Thread

Black Contamination

Black Contamination

Arturo Medellin <[log in to unmask]>

Sat, 29 Mar 2003 10:59:12 -0600

88 lines

Re: Black Contamination

David Douthit <[log in to unmask]>

Sat, 29 Mar 2003 11:21:10 -0700

127 lines

Re: Black Contamination

David Fish <[log in to unmask]>

Sun, 30 Mar 2003 16:11:53 -0500

225 lines

Re: Black Contamination

[log in to unmask]

Mon, 31 Mar 2003 09:05:08 +0800

126 lines

New Thread

Black Oxide

Black Oxide

[log in to unmask]

Thu, 6 Mar 2003 21:10:48 -0800

62 lines

Re: Black Oxide

Larry Russell <[log in to unmask]>

Fri, 7 Mar 2003 14:56:11 +0800

199 lines

Re: Black Oxide

Denis Morrissey <[log in to unmask]>

Fri, 7 Mar 2003 07:07:28 -0500

91 lines

Re: Black Oxide

[log in to unmask]

Sun, 9 Mar 2003 17:53:54 -0800

238 lines

Re: Black Oxide

Denis Morrissey <[log in to unmask]>

Mon, 10 Mar 2003 08:00:54 -0500

229 lines

New Thread

Board Markers

Board Markers

Dave Chapman <[log in to unmask]>

Mon, 3 Mar 2003 13:25:56 -0600

234 lines

Re: Board Markers

Blair K. Hogg <[log in to unmask]>

Mon, 3 Mar 2003 17:08:28 -0500

223 lines

Re: Board Markers

Charles Caswell <[log in to unmask]>

Tue, 4 Mar 2003 06:49:37 -0600

346 lines

Re: Board Markers

joyce <[log in to unmask]>

Tue, 4 Mar 2003 09:05:48 -0500

528 lines

Re: Board Markers

Dave Chapman <[log in to unmask]>

Tue, 4 Mar 2003 09:45:07 -0600

446 lines

Re: Board Markers

Charles Caswell <[log in to unmask]>

Tue, 4 Mar 2003 10:00:29 -0600

362 lines

Re: Board Markers

joyce <[log in to unmask]>

Tue, 4 Mar 2003 11:07:12 -0500

647 lines

Re: Board Markers

[log in to unmask]

Tue, 4 Mar 2003 12:13:20 EST

46 lines

Re: Board Markers

Dave Chapman <[log in to unmask]>

Tue, 4 Mar 2003 11:25:04 -0600

102 lines

New Thread

Board Shop Audit

Board Shop Audit

Olivia Mc Dermott <[log in to unmask]>

Fri, 28 Mar 2003 10:30:09 +0000

37 lines

Re: Board Shop Audit

Roland Jaquet <[log in to unmask]>

Fri, 28 Mar 2003 12:14:39 +0100

192 lines

Re: Board Shop Audit

d. terstegge <[log in to unmask]>

Fri, 28 Mar 2003 12:24:15 +0100

74 lines

Re: Board Shop Audit

Brian Ellis <[log in to unmask]>

Fri, 28 Mar 2003 13:42:31 +0200

64 lines

Board Shop Audit

Olivia Mc Dermott <[log in to unmask]>

Fri, 28 Mar 2003 11:49:57 +0000

30 lines

Re: Board Shop Audit

Dougal Stewart <[log in to unmask]>

Fri, 28 Mar 2003 13:09:54 -0000

74 lines

Re: Board Shop Audit

Steve Gregory <[log in to unmask]>

Fri, 28 Mar 2003 08:32:46 EST

120 lines

Re: Board Shop Audit

Jason W. Gregory <[log in to unmask]>

Fri, 28 Mar 2003 08:13:23 -0600

111 lines

Re: Board Shop Audit

Dwight Mattix <[log in to unmask]>

Mon, 31 Mar 2003 20:06:47 -0800

72 lines

New Thread

cam outsourcing..

Re: cam outsourcing..

[log in to unmask]

Wed, 5 Mar 2003 08:38:27 +0800

89 lines

Re: cam outsourcing..

Brian Butler <[log in to unmask]>

Wed, 5 Mar 2003 08:26:52 -0700

116 lines

New Thread

Can ICs

Can ICs

Dehoyos, Ramon <[log in to unmask]>

Mon, 3 Mar 2003 06:33:03 -0800

32 lines

Re: Can ICs

Creswick, Steven <[log in to unmask]>

Mon, 3 Mar 2003 12:16:19 -0500

66 lines

New Thread

Class 3 Board Rework - Lifted Pads/Lands

Class 3 Board Rework - Lifted Pads/Lands

Dale Ritzen <[log in to unmask]>

Fri, 28 Mar 2003 16:09:47 -0600

40 lines

Re: Class 3 Board Rework - Lifted Pads/Lands

Randy Bock Sr. <[log in to unmask]>

Sat, 29 Mar 2003 08:07:27 -0500

75 lines

Re: Class 3 Board Rework - Lifted Pads/Lands

Neda Thrash <[log in to unmask]>

Sat, 29 Mar 2003 10:23:19 EST

30 lines

New Thread

component lead plating/tinning

component lead plating/tinning

Macko, Joe @ IEC <[log in to unmask]>

Tue, 25 Mar 2003 14:49:29 -0800

35 lines

Re: component lead plating/tinning

Debbie Goodwin <[log in to unmask]>

Tue, 25 Mar 2003 15:35:25 -0800

97 lines

Re: component lead plating/tinning

David Douthit <[log in to unmask]>

Tue, 25 Mar 2003 16:58:32 -0700

60 lines

Re: component lead plating/tinning

Wenger, George M. <[log in to unmask]>

Tue, 25 Mar 2003 18:32:02 -0600

165 lines

Re: component lead plating/tinning

Dave Hillman <[log in to unmask]>

Tue, 25 Mar 2003 20:44:15 -0600

85 lines

Re: component lead plating/tinning

Joe Fjelstad <[log in to unmask]>

Tue, 25 Mar 2003 23:32:48 EST

88 lines

Re: component lead plating/tinning

Debbie Goodwin <[log in to unmask]>

Wed, 26 Mar 2003 07:42:30 -0800

219 lines

New Thread

Computer Monitors and ESD

Computer Monitors and ESD

Bloomquist, Ken <[log in to unmask]>

Wed, 26 Mar 2003 10:07:15 -0800

37 lines

Re: Computer Monitors and ESD

David Douthit <[log in to unmask]>

Wed, 26 Mar 2003 11:40:56 -0700

65 lines

Re: Computer Monitors and ESD

Graham Collins <[log in to unmask]>

Wed, 26 Mar 2003 13:34:31 -0500

73 lines

Re: Computer Monitors and ESD

Bloomquist, Ken <[log in to unmask]>

Wed, 26 Mar 2003 10:34:25 -0800

39 lines

Re: Computer Monitors and ESD

Rich Lasko <[log in to unmask]>

Wed, 26 Mar 2003 13:01:29 -0600

69 lines

Re: Computer Monitors and ESD

[log in to unmask]

Wed, 26 Mar 2003 14:04:34 -0500

68 lines

Re: Computer Monitors and ESD

[log in to unmask]

Thu, 27 Mar 2003 13:27:30 +0800

91 lines

New Thread

Coplanarit of BGA

Coplanarit of BGA

Antonio C. T. Souza <[log in to unmask]>

Mon, 17 Mar 2003 16:22:15 -0300

28 lines

Re: Coplanarit of BGA

Morse, Carrie <[log in to unmask]>

Mon, 17 Mar 2003 14:51:42 -0500

61 lines

New Thread

Cracking Capacitors

Cracking Capacitors

FOX, Ian (York Rd) <[log in to unmask]>

Tue, 25 Mar 2003 16:37:11 -0000

43 lines

Re: Cracking Capacitors

joyce <[log in to unmask]>

Tue, 25 Mar 2003 11:38:27 -0500

78 lines

Re: Cracking Capacitors

FOX, Ian (York Rd) <[log in to unmask]>

Tue, 25 Mar 2003 17:41:28 -0000

92 lines

Re: Cracking Capacitors

Steve Thomas <[log in to unmask]>

Tue, 25 Mar 2003 09:52:54 -0800

150 lines

Re: Cracking Capacitors

[log in to unmask]

Tue, 25 Mar 2003 13:04:31 -0500

120 lines

Re: Cracking Capacitors

FOX, Ian (York Rd) <[log in to unmask]>

Wed, 26 Mar 2003 08:02:25 -0000

164 lines

Re: Cracking Capacitors

Werner Engelmaier <[log in to unmask]>

Wed, 26 Mar 2003 11:02:24 EST

41 lines

New Thread

Depaneling Tools

Re: Depaneling Tools

Taylor, Royce <[log in to unmask]>

Mon, 3 Mar 2003 05:25:37 -0600

142 lines

New Thread

Depanelizing Long V-scored PCB

Depanelizing Long V-scored PCB

Peter L. <[log in to unmask]>

Mon, 3 Mar 2003 14:24:48 -0600

26 lines

New Thread

Documentation numbering system

Documentation numbering system

Dorothy Lush <[log in to unmask]>

Thu, 6 Mar 2003 18:41:28 -0800

30 lines

Re: Documentation numbering system

David Fish <[log in to unmask]>

Fri, 7 Mar 2003 10:01:07 -0500

62 lines

New Thread

Electroless Gold Industry Standard

Electroless Gold Industry Standard

Glenn Pelkey <[log in to unmask]>

Mon, 24 Mar 2003 16:44:05 -0800

29 lines

Re: Electroless Gold Industry Standard

Ted Kong <[log in to unmask]>

Mon, 24 Mar 2003 18:13:38 -0800

64 lines

Re: Electroless Gold Industry Standard

Rey Degollado <[log in to unmask]>

Tue, 25 Mar 2003 15:36:12 +0800

77 lines

New Thread

ESD Survey

ESD Survey

Randy Bock Sr. <[log in to unmask]>

Fri, 21 Mar 2003 17:01:13 -0500

78 lines

Re: ESD Survey

David Fish <[log in to unmask]>

Fri, 21 Mar 2003 17:04:00 -0500

155 lines

Re: ESD Survey

Randy Bock Sr. <[log in to unmask]>

Fri, 21 Mar 2003 17:15:19 -0500

228 lines

Re: ESD Survey

[log in to unmask]

Sun, 23 Mar 2003 13:23:13 EST

52 lines

Re: ESD Survey

Randy Bock Sr. <[log in to unmask]>

Mon, 24 Mar 2003 08:37:17 -0500

131 lines

New Thread

excess copper at etch

excess copper at etch

Russell Burdick <[log in to unmask]>

Fri, 28 Mar 2003 08:24:44 -0700

56 lines

Re: excess copper at etch

Mark Mazzoli <[log in to unmask]>

Fri, 28 Mar 2003 09:03:19 -0800

278 lines

Re: excess copper at etch

Rudy Sedlak <[log in to unmask]>

Fri, 28 Mar 2003 17:06:58 EST

52 lines

New Thread

Excess Flux

Excess Flux

Olivia Mc Dermott <[log in to unmask]>

Mon, 24 Mar 2003 11:53:40 +0000

37 lines

Re: Excess Flux

Brian Ellis <[log in to unmask]>

Mon, 24 Mar 2003 15:14:17 +0200

72 lines

New Thread

exhausting a wave solder machine

exhausting a wave solder machine

Jack Goble <[log in to unmask]>

Mon, 17 Mar 2003 16:00:43 -0600

30 lines

Re: exhausting a wave solder machine

Cagle, James <[log in to unmask]>

Mon, 17 Mar 2003 17:08:44 -0500

67 lines

Re: exhausting a wave solder machine

J&J Technologies <[log in to unmask]>

Mon, 17 Mar 2003 17:32:08 -0500

107 lines

Re: exhausting a wave solder machine

[log in to unmask]

Mon, 17 Mar 2003 19:14:16 EST

62 lines

Re: exhausting a wave solder machine

Brian Ellis <[log in to unmask]>

Tue, 18 Mar 2003 10:44:50 +0200

61 lines

Re: exhausting a wave solder machine

Black, Paul <[log in to unmask]>

Tue, 18 Mar 2003 08:48:33 -0500

71 lines

Re: exhausting a wave solder machine

Ed Popielarski <[log in to unmask]>

Tue, 18 Mar 2003 06:40:31 -0800

159 lines

Re: exhausting a wave solder machine

Leo Lambert <[log in to unmask]>

Tue, 18 Mar 2003 10:56:14 -0200

101 lines

Re: exhausting a wave solder machine

Black, Paul <[log in to unmask]>

Tue, 18 Mar 2003 11:41:25 -0500

65 lines

New Thread

Files with *.PCB Extension...

Files with *.PCB Extension...

Steve Gregory <[log in to unmask]>

Wed, 12 Mar 2003 10:35:55 EST

71 lines

Re: Files with *.PCB Extension...

David Rolfe <[log in to unmask]>

Wed, 12 Mar 2003 10:39:09 -0500

167 lines

Re: Files with *.PCB Extension...

Bill Decray <[log in to unmask]>

Wed, 12 Mar 2003 10:40:47 -0500

82 lines

Re: Files with *.PCB Extension...

[log in to unmask]

Wed, 12 Mar 2003 10:43:05 -0500

74 lines

Re: Files with *.PCB Extension...

McGlaughlin, Jeffrey A <[log in to unmask]>

Wed, 12 Mar 2003 10:43:31 -0500

150 lines

Re: Files with *.PCB Extension...

Donald Kyle <[log in to unmask]>

Wed, 12 Mar 2003 09:43:41 -0600

143 lines

Re: Files with *.PCB Extension...

Gordon McAlpine <[log in to unmask]>

Wed, 12 Mar 2003 15:49:50 -0000

113 lines

Re: Files with *.PCB Extension...

Paul <[log in to unmask]>

Wed, 12 Mar 2003 10:59:42 -0500

163 lines

Re: Files with *.PCB Extension...

d. terstegge <[log in to unmask]>

Wed, 12 Mar 2003 17:09:09 +0100

70 lines

Re: Files with *.PCB Extension...

Gary Bremer <[log in to unmask]>

Wed, 12 Mar 2003 11:15:03 -0500

25 lines

Re: Files with *.PCB Extension...

Reid, Lorraine <[log in to unmask]>

Wed, 12 Mar 2003 16:15:34 -0000

185 lines

Re: Files with *.PCB Extension...

Ofer Cohen <[log in to unmask]>

Wed, 12 Mar 2003 19:18:58 +0200

102 lines

Files with *.PCB Extension...

Fineline Circuits, Inc. <[log in to unmask]>

Wed, 12 Mar 2003 13:27:09 -0800

66 lines

Re: Files with *.PCB Extension...

Tom Burek <[log in to unmask]>

Wed, 12 Mar 2003 14:20:04 -0500

127 lines

New Thread

Finger cots/Gloves/nothing?

Finger cots/Gloves/nothing?

Howard Watson <[log in to unmask]>

Wed, 5 Mar 2003 14:45:47 -0700

68 lines

Re: Finger cots/Gloves/nothing?

Dave Dixon <[log in to unmask]>

Wed, 5 Mar 2003 16:15:39 -0600

146 lines

Re: Finger cots/Gloves/nothing?

Morse, Carrie <[log in to unmask]>

Wed, 5 Mar 2003 17:51:31 -0500

272 lines

Re: Finger cots/Gloves/nothing?

Morse, Carrie <[log in to unmask]>

Wed, 5 Mar 2003 17:55:11 -0500

301 lines

Re: Finger cots/Gloves/nothing?

Dieselberg, Ron <[log in to unmask]>

Thu, 6 Mar 2003 07:58:43 -0500

202 lines

Re: Finger cots/Gloves/nothing?

Nancy Trumbull <[log in to unmask]>

Thu, 6 Mar 2003 12:06:01 -0500

90 lines

Re: Finger cots/Gloves/nothing?

Goldman, Patricia J. <[log in to unmask]>

Fri, 7 Mar 2003 16:08:39 -0500

273 lines

Re: Finger cots/Gloves/nothing?

Chris Almeras <[log in to unmask]>

Fri, 7 Mar 2003 16:24:17 -0500

188 lines

Re: Finger cots/Gloves/nothing?

Phil Nutting <[log in to unmask]>

Fri, 7 Mar 2003 16:59:48 -0500

257 lines

Re: Finger cots/Gloves/nothing?

Gene Felder <[log in to unmask]>

Fri, 7 Mar 2003 16:26:54 -0800

132 lines

New Thread

Finish and material

Finish and material

Ofer Cohen <[log in to unmask]>

Mon, 3 Mar 2003 14:16:20 +0200

37 lines

Re: Finish and material

Dougal Stewart <[log in to unmask]>

Mon, 3 Mar 2003 13:56:16 -0000

76 lines

New Thread

First Pass Yields

Re: First Pass Yields

Smith, Russell (US LA) <[log in to unmask]>

Mon, 3 Mar 2003 10:55:46 -0800

660 lines

Re: First Pass Yields

Randy Bock Sr. <[log in to unmask]>

Mon, 3 Mar 2003 14:19:02 -0500

758 lines

Re: First Pass Yields

Smith, Russell (US LA) <[log in to unmask]>

Mon, 3 Mar 2003 11:23:00 -0800

852 lines

Re: First Pass Yields

Shoda, Steve <[log in to unmask]>

Mon, 3 Mar 2003 14:27:28 -0500

781 lines

Re: First Pass Yields

Smith, Russell (US LA) <[log in to unmask]>

Mon, 3 Mar 2003 12:14:37 -0800

913 lines

Re: First Pass Yields

Rich Lasko <[log in to unmask]>

Mon, 3 Mar 2003 15:29:16 -0600

1584 lines

Re: First Pass Yields

Joe Fjelstad <[log in to unmask]>

Mon, 3 Mar 2003 17:10:34 EST

61 lines

Re: First Pass Yields

Joe Fjelstad <[log in to unmask]>

Mon, 3 Mar 2003 17:14:30 EST

45 lines

New Thread

Flex circuit covercoat question

Flex circuit covercoat question

Steve kelly <[log in to unmask]>

Mon, 10 Mar 2003 16:35:52 -0500

155 lines

Re: Flex circuit covercoat question

Brummer Chuck <[log in to unmask]>

Mon, 10 Mar 2003 14:29:58 -0800

205 lines

Re: Flex circuit covercoat question

Steve kelly <[log in to unmask]>

Tue, 11 Mar 2003 06:47:46 -0500

27 lines

Re: Flex circuit covercoat question

Brummer Chuck <[log in to unmask]>

Tue, 11 Mar 2003 07:29:57 -0800

126 lines

Re: Flex circuit covercoat question

Quality <[log in to unmask]>

Thu, 20 Mar 2003 16:56:26 -0500

77 lines

New Thread

Flux Contamination Testing

Flux Contamination Testing

Bloomquist, Ken <[log in to unmask]>

Thu, 20 Mar 2003 13:42:09 -0800

39 lines

Re: Flux Contamination Testing

David Douthit <[log in to unmask]>

Thu, 20 Mar 2003 19:25:40 -0700

76 lines

Re: Flux Contamination Testing

BRAD VANDERHOOF <[log in to unmask]>

Thu, 20 Mar 2003 23:06:08 -0800

73 lines

Re: Flux Contamination Testing

Tegehall Per-Erik <[log in to unmask]>

Fri, 21 Mar 2003 08:34:15 +0100

116 lines

Re: Flux Contamination Testing

BRAD VANDERHOOF <[log in to unmask]>

Fri, 21 Mar 2003 01:18:07 -0800

141 lines

Re: Flux Contamination Testing

Brian Ellis <[log in to unmask]>

Fri, 21 Mar 2003 11:45:36 +0200

74 lines

Re: Flux Contamination Testing

Graham Naisbitt <[log in to unmask]>

Fri, 21 Mar 2003 10:50:23 +0000

94 lines

Re: Flux Contamination Testing

Bloomquist, Ken <[log in to unmask]>

Fri, 21 Mar 2003 06:18:32 -0800

31 lines

Re: Flux Contamination Testing

Dewey Whittaker <[log in to unmask]>

Fri, 21 Mar 2003 07:31:07 -0700

58 lines

Re: Flux Contamination Testing

[log in to unmask]

Fri, 21 Mar 2003 09:32:12 -0600

89 lines

New Thread

FR-4 outgassing

FR-4 outgassing

Dan R. Johnson <[log in to unmask]>

Thu, 27 Mar 2003 10:35:15 -0800

28 lines

Re: FR-4 outgassing

Donald Durett <[log in to unmask]>

Thu, 27 Mar 2003 13:48:45 -0500

55 lines

Re: FR-4 outgassing

joyce <[log in to unmask]>

Fri, 28 Mar 2003 11:34:47 -0500

61 lines

New Thread

FR4 Cold temp profile

FR4 Cold temp profile

Arvin M. <[log in to unmask]>

Thu, 13 Mar 2003 10:23:36 +0800

36 lines

New Thread

Future 1 solder machine

Future 1 solder machine

Jack Goble <[log in to unmask]>

Thu, 13 Mar 2003 14:05:59 -0600

26 lines

Re: Future 1 solder machine

Dehoyos, Ramon <[log in to unmask]>

Fri, 14 Mar 2003 07:41:16 -0800

60 lines

Re: Future 1 solder machine

Keith Stone <[log in to unmask]>

Mon, 17 Mar 2003 10:39:31 -0600

26 lines

New Thread

FW: production shifts from Western Europe to Eastern Europe and A sia.

FW: production shifts from Western Europe to Eastern Europe and A sia.

Zweigart, Siegmund <[log in to unmask]>

Mon, 31 Mar 2003 14:11:16 +0200

35 lines

Re: FW: production shifts from Western Europe to Eastern Europe and A sia.

Crepeau, Phil <[log in to unmask]>

Mon, 31 Mar 2003 07:23:53 -0800

73 lines

Re: FW: production shifts from Western Europe to Eastern Europe and A sia.

[log in to unmask]

Mon, 31 Mar 2003 10:29:24 -0500

29 lines

New Thread

FW: [TN] Depaneling Tools

FW: [TN] Depaneling Tools

Carl VanWormer <[log in to unmask]>

Mon, 3 Mar 2003 07:14:30 -0800

348 lines

New Thread

FW: [TN] NTC first pass yield , No technical content

FW: [TN] NTC first pass yield , No technical content

Larry Russell <[log in to unmask]>

Wed, 5 Mar 2003 15:43:07 +0800

90 lines

Re: FW: [TN] NTC first pass yield , No technical content

Charles Caswell <[log in to unmask]>

Wed, 5 Mar 2003 08:05:14 -0600

95 lines

New Thread

FW: [TN] TCE above Tg for Dupont CB100 silver resin

FW: [TN] TCE above Tg for Dupont CB100 silver resin

Arbour, Michel <[log in to unmask]>

Mon, 24 Mar 2003 09:10:12 -0500

70 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

Mcmaster, Michael <[log in to unmask]>

Mon, 24 Mar 2003 14:41:03 -0800

420 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

joyce <[log in to unmask]>

Tue, 25 Mar 2003 08:26:18 -0500

594 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

peter blokhuis <[log in to unmask]>

Tue, 25 Mar 2003 06:06:41 -0800

240 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

Yuan Li <[log in to unmask]>

Tue, 25 Mar 2003 10:02:50 -0800

265 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

Mcmaster, Michael <[log in to unmask]>

Tue, 25 Mar 2003 10:21:44 -0800

829 lines

Re: FW: [TN] TCE above Tg for Dupont CB100 silver resin

Arbour, Michel <[log in to unmask]>

Tue, 25 Mar 2003 16:09:50 -0500

335 lines

New Thread

Gerber data

Gerber data

Charlie Pitarys <[log in to unmask]>

Thu, 20 Mar 2003 11:08:36 -0500

116 lines

Re: Gerber data

David Fish <[log in to unmask]>

Fri, 21 Mar 2003 08:37:08 -0500

175 lines

New Thread

gerber viewers..

gerber viewers..

Sergio T. Ruiz <[log in to unmask]>

Mon, 3 Mar 2003 17:04:00 -0500

45 lines

Re: gerber viewers..

Dave Chapman <[log in to unmask]>

Mon, 3 Mar 2003 16:05:36 -0600

70 lines

Re: gerber viewers..

Craig Cullum <[log in to unmask]>

Mon, 3 Mar 2003 16:01:04 -0600

27 lines

Re: gerber viewers..

d. terstegge <[log in to unmask]>

Tue, 4 Mar 2003 08:41:06 +0100

81 lines

New Thread

gerber viewers.. - DRC capabilities

gerber viewers.. - DRC capabilities

Ofer Cohen <[log in to unmask]>

Tue, 4 Mar 2003 09:57:56 +0200

111 lines

New Thread

German Silver

German Silver

Bev Christian <[log in to unmask]>

Wed, 12 Mar 2003 07:57:40 -0500

31 lines

Re: German Silver

Brian Ellis <[log in to unmask]>

Wed, 12 Mar 2003 15:15:48 +0200

61 lines

Re: German Silver

Dave Hillman <[log in to unmask]>

Wed, 12 Mar 2003 07:34:42 -0600

84 lines

Re: German Silver

Crepeau, Phil <[log in to unmask]>

Wed, 12 Mar 2003 07:00:29 -0800

100 lines

Re: German Silver

Dan R. Johnson <[log in to unmask]>

Wed, 12 Mar 2003 07:58:50 -0800

32 lines

Re: German Silver

Bev Christian <[log in to unmask]>

Wed, 12 Mar 2003 11:01:14 -0500

49 lines

Re: German Silver

Dan R. Johnson <[log in to unmask]>

Wed, 12 Mar 2003 08:07:06 -0800

30 lines

Re: German Silver

Dave Hillman <[log in to unmask]>

Wed, 12 Mar 2003 14:19:32 -0600

90 lines

Re: German Silver

Dave Hillman <[log in to unmask]>

Wed, 12 Mar 2003 14:27:03 -0600

82 lines

Re: German Silver

Dan R. Johnson <[log in to unmask]>

Wed, 12 Mar 2003 12:57:01 -0800

31 lines

New Thread

Glue suppliers for chip-on-wave assembly

Glue suppliers for chip-on-wave assembly

McCall,Doug <[log in to unmask]>

Wed, 5 Mar 2003 15:16:45 -0000

48 lines

Re: Glue suppliers for chip-on-wave assembly

Morse, Carrie <[log in to unmask]>

Wed, 5 Mar 2003 11:56:26 -0500

99 lines

Re: Glue suppliers for chip-on-wave assembly

Mark Charlton <[log in to unmask]>

Wed, 5 Mar 2003 12:00:18 -0500

125 lines

Re: Glue suppliers for chip-on-wave assembly

Jowan Iven <[log in to unmask]>

Thu, 6 Mar 2003 08:25:59 +0100

104 lines

Re: Glue suppliers for chip-on-wave assembly

Brian Toleno <[log in to unmask]>

Thu, 6 Mar 2003 13:22:33 -0800

89 lines

New Thread

Gold Tarnish.

Gold Tarnish.

Steve MacDonald <[log in to unmask]>

Tue, 11 Mar 2003 10:55:00 -0500

96 lines

Re: Gold Tarnish.

Anil Kher <[log in to unmask]>

Wed, 12 Mar 2003 13:04:12 +0530

190 lines

Re: Gold Tarnish.

Mike Fenner <[log in to unmask]>

Wed, 12 Mar 2003 09:16:21 -0000

70 lines

New Thread

Hakko Hot Air Rework Equipment (Model 850)

Hakko Hot Air Rework Equipment (Model 850)

Rich Lasko <[log in to unmask]>

Thu, 13 Mar 2003 12:45:02 -0600

221 lines

Re: Hakko Hot Air Rework Equipment (Model 850)

Steve Gregory <[log in to unmask]>

Thu, 13 Mar 2003 14:09:40 EST

132 lines

Re: Hakko Hot Air Rework Equipment (Model 850)

Rich Lasko <[log in to unmask]>

Thu, 13 Mar 2003 13:18:20 -0600

351 lines

New Thread

handsome side filler photo needed

handsome side filler photo needed

joyce <[log in to unmask]>

Thu, 20 Mar 2003 11:45:34 -0500

100 lines

New Thread

handsome side fillet photo needed

Re: handsome side fillet photo needed

joyce <[log in to unmask]>

Thu, 20 Mar 2003 14:06:36 -0500

175 lines

New Thread

Heat transfer from ENIG board to aluminium casing

Heat transfer from ENIG board to aluminium casing

d. terstegge <[log in to unmask]>

Mon, 17 Mar 2003 11:32:59 +0100

39 lines

Re: Heat transfer from ENIG board to aluminium casing

Brian Ellis <[log in to unmask]>

Tue, 18 Mar 2003 14:54:55 +0200

65 lines

Re: Heat transfer from ENIG board to aluminium casing

Dave Hillman <[log in to unmask]>

Tue, 18 Mar 2003 07:46:48 -0600

124 lines

Re: Heat transfer from ENIG board to aluminium casing

FOX, Ian (York Rd) <[log in to unmask]>

Tue, 18 Mar 2003 14:44:31 -0000

157 lines

Re: Heat transfer from ENIG board to aluminium casing

Dave Hillman <[log in to unmask]>

Tue, 18 Mar 2003 10:04:10 -0600

214 lines

Re: Heat transfer from ENIG board to aluminium casing

David Douthit <[log in to unmask]>

Tue, 18 Mar 2003 12:40:57 -0700

221 lines

Re: Heat transfer from ENIG board to aluminium casing

joyce <[log in to unmask]>

Wed, 19 Mar 2003 07:55:03 -0500

168 lines

Re: Heat transfer from ENIG board to aluminium casing

Tim Reeves <[log in to unmask]>

Wed, 19 Mar 2003 10:53:02 -0800

75 lines

Re: Heat transfer from ENIG board to aluminium casing

[log in to unmask]

Mon, 24 Mar 2003 15:09:58 +0800

107 lines

Re: Heat transfer from ENIG board to aluminium casing

[log in to unmask]

Mon, 24 Mar 2003 15:14:31 +0800

121 lines

New Thread

How to hold component in socket

How to hold component in socket

Genny Gibbard <[log in to unmask]>

Tue, 18 Mar 2003 10:17:30 -0600

83 lines

Re: How to hold component in socket

Blair K. Hogg <[log in to unmask]>

Tue, 18 Mar 2003 11:32:19 -0500

71 lines

Re: How to hold component in socket

Cagle, James <[log in to unmask]>

Tue, 18 Mar 2003 11:29:53 -0500

103 lines

Re: How to hold component in socket

Brian Ellis <[log in to unmask]>

Tue, 18 Mar 2003 18:47:13 +0200

61 lines

Re: How to hold component in socket

Roger Stoops <[log in to unmask]>

Tue, 18 Mar 2003 12:11:37 -0500

72 lines

Re: How to hold component in socket

Dan R. Johnson <[log in to unmask]>

Tue, 18 Mar 2003 09:17:29 -0800

77 lines

Re: How to hold component in socket

Coleman, Bill <[log in to unmask]>

Tue, 18 Mar 2003 10:27:55 -0700

80 lines

Re: How to hold component in socket

Randy Bock Sr. <[log in to unmask]>

Tue, 18 Mar 2003 12:46:52 -0500

248 lines

Re: How to hold component in socket

Phil Nutting <[log in to unmask]>

Tue, 18 Mar 2003 12:41:34 -0500

192 lines

Re: How to hold component in socket

Genny Gibbard <[log in to unmask]>

Tue, 18 Mar 2003 11:50:05 -0600

150 lines

Re: How to hold component in socket

Dan R. Johnson <[log in to unmask]>

Tue, 18 Mar 2003 10:20:25 -0800

81 lines

Re: How to hold component in socket

Ted Kong <[log in to unmask]>

Tue, 18 Mar 2003 13:21:41 -0800

81 lines

Re: How to hold component in socket

joyce <[log in to unmask]>

Wed, 19 Mar 2003 08:02:38 -0500

97 lines

How to hold component in socket

Genny Gibbard <[log in to unmask]>

Wed, 19 Mar 2003 15:57:16 -0600

83 lines

Re: How to hold component in socket

Victor Hernandez <[log in to unmask]>

Thu, 20 Mar 2003 05:33:21 -0600

137 lines

New Thread

HTML

HTML

J. Brewer <[log in to unmask]>

Fri, 14 Mar 2003 10:03:33 -0500

58 lines

Re: HTML

Mike Fenner <[log in to unmask]>

Fri, 14 Mar 2003 15:49:12 -0000

97 lines

Re: HTML

Jeff Seeger <[log in to unmask]>

Fri, 14 Mar 2003 10:56:09 -0500

38 lines

New Thread

Humidity Chart Recorders

Humidity Chart Recorders

Peter Wong <[log in to unmask]>

Fri, 14 Mar 2003 14:13:06 -0800

159 lines

Re: Humidity Chart Recorders

Dave Dixon <[log in to unmask]>

Fri, 14 Mar 2003 16:43:34 -0600

124 lines

Re: Humidity Chart Recorders

Randy Bock Sr. <[log in to unmask]>

Sat, 15 Mar 2003 07:47:45 -0500

204 lines

Re: Humidity Chart Recorders

Bill Christoffel <[log in to unmask]>

Mon, 17 Mar 2003 08:02:07 -0600

207 lines

Re: Humidity Chart Recorders

Morse, Carrie <[log in to unmask]>

Mon, 17 Mar 2003 11:36:27 -0500

284 lines

New Thread

info requested

info requested

Genny Gibbard <[log in to unmask]>

Wed, 5 Mar 2003 10:42:04 -0600

77 lines

Re: info requested

Tom Waznis <[log in to unmask]>

Wed, 5 Mar 2003 09:03:37 -0800

148 lines

Re: info requested

[log in to unmask]

Wed, 5 Mar 2003 12:09:33 EST

108 lines

Re: info requested

Ofer Cohen <[log in to unmask]>

Wed, 5 Mar 2003 19:35:20 +0200

160 lines

Re: info requested

Eddie Rocha <[log in to unmask]>

Wed, 5 Mar 2003 10:02:59 -0800

29 lines

New Thread

Ionic Equivalence

Re: Ionic Equivalence

Patrick Sullivan <[log in to unmask]>

Mon, 3 Mar 2003 10:24:05 -0500

151 lines

New Thread

IPC Printed Circuits Expo - Important Information From Show Management

IPC Printed Circuits Expo - Important Information From Show Management

Jack Crawford <[log in to unmask]>

Tue, 18 Mar 2003 17:53:12 -0600

63 lines

New Thread

IPC Revamps Web Site www.ipc.org

IPC Revamps Web Site www.ipc.org

Jack Crawford <[log in to unmask]>

Fri, 21 Mar 2003 09:59:17 -0600

39 lines

New Thread

IPC SMEMA Council APEX - Important Information From Show Management

IPC SMEMA Council APEX - Important Information From Show Management

Jack Crawford <[log in to unmask]>

Tue, 18 Mar 2003 19:03:09 -0600

48 lines

New Thread

IPC Solder Paste Tack Testing

IPC Solder Paste Tack Testing

Bev Christian <[log in to unmask]>

Wed, 19 Mar 2003 10:01:59 -0500

27 lines

Re: IPC Solder Paste Tack Testing

Steve Gregory <[log in to unmask]>

Wed, 19 Mar 2003 10:23:40 EST

76 lines

New Thread

IPC Test Board

IPC Test Board

Roland Jaquet <[log in to unmask]>

Fri, 28 Mar 2003 16:17:45 +0100

92 lines

New Thread

IPC-7721 Conformance Levels

IPC-7721 Conformance Levels

Rich Lasko <[log in to unmask]>

Wed, 26 Mar 2003 08:33:50 -0600

240 lines

Re: IPC-7721 Conformance Levels

Nowland, Russell Howard (Russell) <[log in to unmask]>

Wed, 26 Mar 2003 08:41:48 -0600

311 lines

Re: IPC-7721 Conformance Levels

Jeff Ferry <[log in to unmask]>

Wed, 26 Mar 2003 10:08:28 -0500

377 lines

Re: IPC-7721 Conformance Levels

Rich Lasko <[log in to unmask]>

Wed, 26 Mar 2003 09:47:19 -0600

601 lines

Re: IPC-7721 Conformance Levels

Ted Tontis, C.I.D. <[log in to unmask]>

Wed, 26 Mar 2003 09:53:33 -0600

731 lines

Re: IPC-7721 Conformance Levels

Crepeau, Phil <[log in to unmask]>

Wed, 26 Mar 2003 08:59:35 -0800

589 lines

Re: IPC-7721 Conformance Levels

[log in to unmask]

Thu, 27 Mar 2003 13:17:36 +0800

71 lines

Re: IPC-7721 Conformance Levels

Neda Thrash <[log in to unmask]>

Thu, 27 Mar 2003 14:26:03 EST

45 lines

New Thread

Iron for Electrolytic Copper Plating

Iron for Electrolytic Copper Plating

Sencer Sofuoglu <[log in to unmask]>

Fri, 14 Mar 2003 14:39:11 -0600

31 lines

Re: Iron for Electrolytic Copper Plating

Barmuta, Mike <[log in to unmask]>

Mon, 17 Mar 2003 14:14:27 -0800

95 lines

Re: Iron for Electrolytic Copper Plating

Sencer Sofuoglu <[log in to unmask]>

Tue, 18 Mar 2003 10:32:53 -0600

132 lines

Re: Iron for Electrolytic Copper Plating

Barmuta, Mike <[log in to unmask]>

Tue, 18 Mar 2003 10:02:31 -0800

152 lines

New Thread

Is anyone going to Apex?

Is anyone going to Apex?

Ed Popielarski <[log in to unmask]>

Thu, 20 Mar 2003 05:55:25 -0800

99 lines

Re: Is anyone going to Apex?

Devlin, Dan <[log in to unmask]>

Thu, 20 Mar 2003 09:17:26 -0500

138 lines

Re: Is anyone going to Apex?

Jason W. Gregory <[log in to unmask]>

Thu, 20 Mar 2003 08:38:32 -0600

90 lines

Re: Is anyone going to Apex?

Debbie Goodwin <[log in to unmask]>

Thu, 20 Mar 2003 07:00:17 -0800

185 lines

Re: Is anyone going to Apex?

Nowland, Russell Howard (Russell) <[log in to unmask]>

Thu, 20 Mar 2003 09:30:59 -0600

153 lines

Re: Is anyone going to Apex?

joyce <[log in to unmask]>

Thu, 20 Mar 2003 10:33:14 -0500

182 lines

Re: Is anyone going to Apex?

Dan R. Johnson <[log in to unmask]>

Thu, 20 Mar 2003 08:03:29 -0800

69 lines

Re: Is anyone going to Apex?

Howard Watson <[log in to unmask]>

Thu, 20 Mar 2003 11:19:03 -0500

153 lines

Re: Is anyone going to Apex?

Steve Gregory <[log in to unmask]>

Thu, 20 Mar 2003 14:19:31 EST

150 lines

Re: Is anyone going to Apex?

Tempea, Ioan <[log in to unmask]>

Thu, 20 Mar 2003 14:27:38 -0500

89 lines

Re: Is anyone going to Apex?

Debbie Goodwin <[log in to unmask]>

Thu, 20 Mar 2003 12:05:05 -0800

138 lines

Re: Is anyone going to Apex?

Steve Gregory <[log in to unmask]>

Thu, 20 Mar 2003 15:25:23 EST

95 lines

Re: Is anyone going to Apex?

Debbie Goodwin <[log in to unmask]>

Thu, 20 Mar 2003 12:24:43 -0800

191 lines

Re: Is anyone going to Apex?

Werner Engelmaier <[log in to unmask]>

Fri, 21 Mar 2003 00:59:54 EST

24 lines

Re: Is anyone going to Apex?

Ed Popielarski <[log in to unmask]>

Fri, 21 Mar 2003 06:35:34 -0800

146 lines

Re: Is anyone going to Apex?

Howard Watson <[log in to unmask]>

Fri, 21 Mar 2003 11:16:29 -0500

229 lines

Re: Is anyone going to Apex?

Ed Valentine <[log in to unmask]>

Fri, 21 Mar 2003 14:37:33 -0500

187 lines

New Thread

J-Std-001B

J-Std-001B

Yannick Brisson <[log in to unmask]>

Thu, 13 Mar 2003 07:23:38 -0500

29 lines

New Thread

Kester Solder-Nu replacement

Re: Kester Solder-Nu replacement

Charles Caswell <[log in to unmask]>

Wed, 5 Mar 2003 09:10:06 -0600

157 lines

Re: Kester Solder-Nu replacement

joyce <[log in to unmask]>

Wed, 5 Mar 2003 10:31:23 -0500

177 lines

Re: Kester Solder-Nu replacement

Charles Caswell <[log in to unmask]>

Wed, 5 Mar 2003 09:49:47 -0600

207 lines

Re: Kester Solder-Nu replacement

joyce <[log in to unmask]>

Wed, 5 Mar 2003 11:01:09 -0500

239 lines

Re: Kester Solder-Nu replacement

Black, Paul <[log in to unmask]>

Tue, 11 Mar 2003 10:55:05 -0500

174 lines

Re: Kester Solder-Nu replacement

Charles Caswell <[log in to unmask]>

Tue, 11 Mar 2003 10:21:27 -0600

223 lines

New Thread

Laminate voids & resin recession

Laminate voids & resin recession

[log in to unmask]

Tue, 25 Mar 2003 15:14:07 +0530

60 lines

Re: Laminate voids & resin recession

Rick <[log in to unmask]>

Tue, 25 Mar 2003 07:13:59 -0500

40 lines

Re: Laminate voids & resin recession

Geoff Layhe <[log in to unmask]>

Tue, 25 Mar 2003 13:04:44 -0000

104 lines

Re: Laminate voids & resin recession

Tim Reeves <[log in to unmask]>

Tue, 25 Mar 2003 15:23:44 -0800

78 lines

Re: Laminate voids & resin recession

[log in to unmask]

Wed, 26 Mar 2003 11:22:52 +0530

117 lines

New Thread

Leadfree alloy supplier

Leadfree alloy supplier

Gerard O'Brien <[log in to unmask]>

Fri, 7 Mar 2003 11:29:45 -0500

190 lines

Re: Leadfree alloy supplier

Tempea, Ioan <[log in to unmask]>

Fri, 7 Mar 2003 12:19:27 -0500

66 lines

Re: Leadfree alloy supplier

Mike Fenner <[log in to unmask]>

Mon, 10 Mar 2003 12:15:03 -0000

108 lines

New Thread

LGA Processing

LGA Processing

Carlr Ray <[log in to unmask]>

Thu, 6 Mar 2003 10:49:25 -0600

38 lines

New Thread

Looking for X-Ray service

Looking for X-Ray service

Debbie Goodwin <[log in to unmask]>

Tue, 25 Mar 2003 14:42:42 -0800

51 lines

Re: Looking for X-Ray service

Macko, Joe @ IEC <[log in to unmask]>

Tue, 25 Mar 2003 14:59:05 -0800

79 lines

Re: Looking for X-Ray service

Crepeau, Phil <[log in to unmask]>

Tue, 25 Mar 2003 16:47:11 -0800

86 lines

New Thread

material data pink bubble wrap

material data pink bubble wrap

joyce <[log in to unmask]>

Mon, 31 Mar 2003 09:50:47 -0500

80 lines

Re: material data pink bubble wrap

David Fish <[log in to unmask]>

Mon, 31 Mar 2003 11:12:22 -0500

263 lines

Re: material data pink bubble wrap

Lee Whiteman <[log in to unmask]>

Mon, 31 Mar 2003 11:50:16 -0500

385 lines

New Thread

Material for fabrication of PCB for Smart Card applicati on.

Re: Material for fabrication of PCB for Smart Card applicati on.

Geoff Layhe <[log in to unmask]>

Fri, 21 Mar 2003 13:47:28 -0000

95 lines

New Thread

Material for fabrication of PCB for Smart Card application.

Material for fabrication of PCB for Smart Card application.

Raghavendra Rao <[log in to unmask]>

Fri, 21 Mar 2003 18:44:01 +0530

60 lines

New Thread

Mercury Free Cert

Mercury Free Cert

Mark Hargreaves <[log in to unmask]>

Tue, 18 Mar 2003 07:46:00 -0500

36 lines

Re: Mercury Free Cert

Brian Ellis <[log in to unmask]>

Tue, 18 Mar 2003 15:01:50 +0200

59 lines

Re: Mercury Free Cert

Bev Christian <[log in to unmask]>

Tue, 18 Mar 2003 08:10:52 -0500

73 lines

Re: Mercury Free Cert

Mike Fenner <[log in to unmask]>

Tue, 18 Mar 2003 13:58:34 -0000

106 lines

Re: Mercury Free Cert

Rudy Sedlak <[log in to unmask]>

Tue, 18 Mar 2003 10:45:22 EST

69 lines

Re: Mercury Free Cert

Brian Ellis <[log in to unmask]>

Tue, 18 Mar 2003 18:19:47 +0200

53 lines

Re: Mercury Free Cert

Rudy Sedlak <[log in to unmask]>

Tue, 18 Mar 2003 11:27:01 EST

61 lines

Re: Mercury Free Cert

Morse, Carrie <[log in to unmask]>

Tue, 18 Mar 2003 12:17:34 -0500

142 lines

Re: Mercury Free Cert

Quality <[log in to unmask]>

Thu, 20 Mar 2003 16:39:44 -0500

72 lines

Re: Mercury Free Cert

Tim Reeves <[log in to unmask]>

Fri, 21 Mar 2003 09:49:49 -0800

122 lines

Re: Mercury Free Cert

David Douthit <[log in to unmask]>

Fri, 21 Mar 2003 11:16:32 -0700

116 lines

Re: Mercury Free Cert

Tim Reeves <[log in to unmask]>

Fri, 21 Mar 2003 10:10:58 -0800

168 lines

Re: Mercury Free Cert

David Douthit <[log in to unmask]>

Fri, 21 Mar 2003 15:43:07 -0700

341 lines

New Thread

Mixing fluxes - documentation vacuum

Mixing fluxes - documentation vacuum

Vivari, John <[log in to unmask]>

Tue, 11 Mar 2003 09:10:50 -0500

52 lines

Re: Mixing fluxes - documentation vacuum

Guy Ramsey <[log in to unmask]>

Tue, 11 Mar 2003 09:29:19 -0500

88 lines

Re: Mixing fluxes - documentation vacuum

Brian Ellis <[log in to unmask]>

Tue, 11 Mar 2003 16:41:19 +0200

83 lines

Re: Mixing fluxes - documentation vacuum

Zweigart, Siegmund <[log in to unmask]>

Tue, 11 Mar 2003 15:57:05 +0100

94 lines

Re: Mixing fluxes - documentation vacuum

Mel Parrish <[log in to unmask]>

Tue, 11 Mar 2003 09:44:21 -0600

132 lines

Re: Mixing fluxes - documentation vacuum

Dave Hillman <[log in to unmask]>

Tue, 11 Mar 2003 09:45:04 -0600

101 lines

Re: Mixing fluxes - documentation vacuum

Graham Naisbitt <[log in to unmask]>

Tue, 11 Mar 2003 18:29:50 +0000

74 lines

Re: Mixing fluxes - documentation vacuum

Cagle, James <[log in to unmask]>

Wed, 12 Mar 2003 13:52:11 -0500

132 lines

Re: Mixing fluxes - documentation vacuum

Bev Christian <[log in to unmask]>

Thu, 13 Mar 2003 08:25:53 -0500

198 lines

Re: Mixing fluxes - documentation vacuum

Phil Kinner <[log in to unmask]>

Thu, 13 Mar 2003 13:59:19 -0000

246 lines

Re: Mixing fluxes - documentation vacuum

Brian Ellis <[log in to unmask]>

Thu, 13 Mar 2003 16:29:18 +0200

243 lines

Re: Mixing fluxes - documentation vacuum

Phil Kinner <[log in to unmask]>

Thu, 13 Mar 2003 14:38:41 -0000

353 lines

Re: Mixing fluxes - documentation vacuum

Hernandez, Victor G <[log in to unmask]>

Thu, 13 Mar 2003 08:58:14 -0600

239 lines

Re: Mixing fluxes - documentation vacuum

Barry Gallegos <[log in to unmask]>

Thu, 13 Mar 2003 08:33:46 -0700

263 lines

New Thread

Mixing fluxes - more

Re: Mixing fluxes - more

Tom Parkinson - Quality System Manager - WinTronics, Inc. <[log in to unmask]>

Tue, 11 Mar 2003 11:39:13 -0500

54 lines

Re: Mixing fluxes - more

Phil Nutting <[log in to unmask]>

Tue, 11 Mar 2003 11:47:57 -0500

84 lines

Re: Mixing fluxes - more

Graham Collins <[log in to unmask]>

Tue, 11 Mar 2003 11:57:24 -0500

92 lines

Re: Mixing fluxes - more

[log in to unmask]

Tue, 11 Mar 2003 11:20:27 -0600

107 lines

Re: Mixing fluxes - more

Mel Parrish <[log in to unmask]>

Tue, 11 Mar 2003 11:27:20 -0600

97 lines

Re: Mixing fluxes - more

Steve Thomas <[log in to unmask]>

Tue, 11 Mar 2003 09:42:03 -0800

94 lines

New Thread

Mixing fluxes - very little TechContent

Re: Mixing fluxes - very little TechContent

Genny Gibbard <[log in to unmask]>

Tue, 11 Mar 2003 08:52:11 -0600

117 lines

New Thread

Mouse bites on inner layers

Re: Mouse bites on inner layers

paul reid <[log in to unmask]>

Fri, 28 Mar 2003 11:49:18 -0500

95 lines

New Thread

Mousebites on innerlayers

Mousebites on innerlayers

Franklin D Asbell <[log in to unmask]>

Fri, 28 Mar 2003 08:54:50 -0600

32 lines

Re: Mousebites on innerlayers

Rick <[log in to unmask]>

Fri, 28 Mar 2003 10:03:26 -0500

27 lines

Re: Mousebites on innerlayers

Hernandez, Victor G <[log in to unmask]>

Fri, 28 Mar 2003 09:34:39 -0600

64 lines

Re: Mousebites on innerlayers

Dougal Stewart <[log in to unmask]>

Fri, 28 Mar 2003 16:56:12 -0000

65 lines

Re: Mousebites on innerlayers

Dougal Stewart <[log in to unmask]>

Fri, 28 Mar 2003 17:02:54 -0000

79 lines

New Thread

Mousebites on innerlayers--YES

Mousebites on innerlayers--YES

Rudy Sedlak <[log in to unmask]>

Fri, 28 Mar 2003 16:54:05 EST

37 lines

New Thread

New IPC Webite

New IPC Webite

Larry Russell <[log in to unmask]>

Fri, 21 Mar 2003 11:28:29 +0800

75 lines

Re: New IPC Webite

Steve Gregory <[log in to unmask]>

Thu, 20 Mar 2003 22:45:11 EST

88 lines

Re: New IPC Webite

Larry Russell <[log in to unmask]>

Fri, 21 Mar 2003 12:09:25 +0800

207 lines

Re: New IPC Webite

Tim Reeves <[log in to unmask]>

Fri, 21 Mar 2003 09:52:43 -0800

284 lines

New Thread

new website

new website

joyce <[log in to unmask]>

Wed, 26 Mar 2003 16:48:46 -0500

201 lines

New Thread

non functional pad removal

non functional pad removal

Bill Decray <[log in to unmask]>

Wed, 26 Mar 2003 15:33:56 -0500

40 lines

Re: non functional pad removal

Franklin D Asbell <[log in to unmask]>

Wed, 26 Mar 2003 15:48:00 -0600

73 lines

Re: non functional pad removal

[log in to unmask]

Wed, 26 Mar 2003 18:05:44 EST

26 lines

Re: non functional pad removal

DUTTON Phil <[log in to unmask]>

Thu, 27 Mar 2003 10:12:30 +1100

74 lines

Re: non functional pad removal

[log in to unmask]

Thu, 27 Mar 2003 13:42:59 +0800

107 lines

Re: non functional pad removal

FOX, Ian (York Rd) <[log in to unmask]>

Thu, 27 Mar 2003 09:53:57 -0000

135 lines

Re: non functional pad removal

Brian Ellis <[log in to unmask]>

Thu, 27 Mar 2003 11:56:46 +0200

68 lines

Re: non functional pad removal

Werner Engelmaier <[log in to unmask]>

Thu, 27 Mar 2003 09:46:36 EST

35 lines

Re: non functional pad removal

Randy Bock Sr. <[log in to unmask]>

Thu, 27 Mar 2003 10:29:58 -0500

73 lines

Re: non functional pad removal

Franklin D Asbell <[log in to unmask]>

Thu, 27 Mar 2003 09:53:16 -0600

64 lines

Re: non functional pad removal

Mcmaster, Michael <[log in to unmask]>

Thu, 27 Mar 2003 09:33:09 -0800

336 lines

Re: non functional pad removal

Eddie Rocha <[log in to unmask]>

Thu, 27 Mar 2003 09:37:14 -0800

38 lines

Re: non functional pad removal

[log in to unmask]

Fri, 28 Mar 2003 07:59:40 +0800

87 lines

Re: non functional pad removal

Werner Engelmaier <[log in to unmask]>

Fri, 28 Mar 2003 10:16:35 EST

29 lines

Re: non functional pad removal

Werner Engelmaier <[log in to unmask]>

Fri, 28 Mar 2003 10:16:37 EST

40 lines

Re: non functional pad removal

[log in to unmask]

Mon, 31 Mar 2003 08:30:14 +0800

95 lines

Re: non functional pad removal

Werner Engelmaier <[log in to unmask]>

Mon, 31 Mar 2003 00:30:12 EST

69 lines

New Thread

non functional pads

Re: non functional pads

Dougal Stewart <[log in to unmask]>

Fri, 28 Mar 2003 08:53:30 -0000

100 lines

New Thread

Non HTML version of list?

Non HTML version of list?

J. Brewer <[log in to unmask]>

Thu, 13 Mar 2003 07:56:49 -0500

28 lines

Re: Non HTML version of list?

Werner Engelmaier <[log in to unmask]>

Thu, 13 Mar 2003 10:26:16 EST

25 lines

Re: Non HTML version of list?

Brian Ellis <[log in to unmask]>

Thu, 13 Mar 2003 17:46:10 +0200

61 lines

Re: Non HTML version of list?

Phil Nutting <[log in to unmask]>

Thu, 13 Mar 2003 10:51:55 -0500

100 lines

Re: Non HTML version of list?

Brian Ellis <[log in to unmask]>

Thu, 13 Mar 2003 18:23:58 +0200

132 lines

Re: Non HTML version of list?

John Parsons <[log in to unmask]>

Thu, 13 Mar 2003 09:10:05 -0800

40 lines

Re: Non HTML version of list?

rgrant <[log in to unmask]>

Thu, 13 Mar 2003 14:02:54 -0700

62 lines

Re: Non HTML version of list?

Phil Nutting <[log in to unmask]>

Thu, 13 Mar 2003 16:16:49 -0500

113 lines

New Thread

Non HTML version of list? NTC

Re: Non HTML version of list? NTC

Genny Gibbard <[log in to unmask]>

Thu, 13 Mar 2003 11:29:59 -0600

51 lines

New Thread

Non-HTML Version of List

Non-HTML Version of List

Keach Sasamori <[log in to unmask]>

Thu, 13 Mar 2003 16:51:24 -0600

50 lines

New Thread

NTC first pass yield

NTC first pass yield

James TerVeen <[log in to unmask]>

Tue, 4 Mar 2003 09:13:44 -0500

61 lines

New Thread

NTC first pass yield , No technical content

Re: NTC first pass yield , No technical content

Mike Fenner <[log in to unmask]>

Tue, 4 Mar 2003 17:52:57 -0000

99 lines

Re: NTC first pass yield , No technical content

David Fish <[log in to unmask]>

Wed, 5 Mar 2003 11:54:26 -0500

134 lines

Re: NTC first pass yield , No technical content

Dan R. Johnson <[log in to unmask]>

Wed, 5 Mar 2003 10:37:43 -0800

29 lines

New Thread

NTC, A tribute...

NTC, A tribute...

Steve Gregory <[log in to unmask]>

Fri, 28 Mar 2003 15:35:39 EST

67 lines

Re: NTC, A tribute...

Roland Jaquet <[log in to unmask]>

Sat, 29 Mar 2003 00:05:11 +0100

156 lines

Re: NTC, A tribute...

Edward Szpruch <[log in to unmask]>

Sun, 30 Mar 2003 07:54:34 +0200

110 lines

Re: NTC, A tribute...

Bernard Kessler <[log in to unmask]>

Sun, 30 Mar 2003 09:31:11 -0800

166 lines

Re: NTC, A tribute...

Roland Jaquet <[log in to unmask]>

Mon, 31 Mar 2003 13:19:15 +0200

895 lines

New Thread

Ozone usage limitations

Ozone usage limitations

Larry Russell <[log in to unmask]>

Tue, 1 Apr 2003 10:02:29 +0800

91 lines

Re: Ozone usage limitations

David Douthit <[log in to unmask]>

Mon, 31 Mar 2003 20:01:14 -0700

132 lines

Re: Ozone usage limitations

Larry Russell <[log in to unmask]>

Tue, 1 Apr 2003 13:11:48 +0800

234 lines

Re: Ozone usage limitations

David Douthit <[log in to unmask]>

Mon, 31 Mar 2003 22:36:48 -0700

244 lines

Re: Ozone usage limitations

Larry Russell <[log in to unmask]>

Tue, 1 Apr 2003 13:56:29 +0800

370 lines

New Thread

Panasonic Film Chip Capacitors and SMT Reflow

Panasonic Film Chip Capacitors and SMT Reflow

Rich Lasko <[log in to unmask]>

Wed, 19 Mar 2003 14:51:00 -0600

243 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

[log in to unmask]

Wed, 19 Mar 2003 14:12:04 -0700

99 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Blair K. Hogg <[log in to unmask]>

Wed, 19 Mar 2003 16:13:08 -0500

82 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Bev Christian <[log in to unmask]>

Wed, 19 Mar 2003 16:48:10 -0500

118 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Steve Thomas <[log in to unmask]>

Wed, 19 Mar 2003 13:30:10 -0800

92 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Darryl Tarpley <[log in to unmask]>

Wed, 19 Mar 2003 16:23:04 -0600

134 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Steve Gregory <[log in to unmask]>

Wed, 19 Mar 2003 18:51:36 EST

173 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Ofer Cohen <[log in to unmask]>

Thu, 20 Mar 2003 09:23:19 +0200

134 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Marie-Elisabeth MAGNIN <[log in to unmask]>

Thu, 20 Mar 2003 08:35:39 +0100

331 lines

Re: Panasonic Film Chip Capacitors and SMT Reflow

Rich Lasko <[log in to unmask]>

Thu, 20 Mar 2003 09:47:39 -0600

478 lines

New Thread

PC Board thickness measurement

PC Board thickness measurement

Franklin D Asbell <[log in to unmask]>

Mon, 3 Mar 2003 08:49:23 -0600

36 lines

Re: PC Board thickness measurement

Scott Westheimer <[log in to unmask]>

Mon, 3 Mar 2003 09:52:50 -0500

77 lines

Re: PC Board thickness measurement

Marie-Elisabeth MAGNIN <[log in to unmask]>

Mon, 3 Mar 2003 16:10:09 +0100

102 lines

Re: PC Board thickness measurement

Franklin D Asbell <[log in to unmask]>

Mon, 3 Mar 2003 09:31:59 -0600

109 lines

Re: PC Board thickness measurement

Scott Westheimer <[log in to unmask]>

Mon, 3 Mar 2003 11:26:07 -0500

152 lines

Re: PC Board thickness measurement

Mcmaster, Michael <[log in to unmask]>

Mon, 3 Mar 2003 09:01:07 -0800

524 lines

Re: PC Board thickness measurement

[log in to unmask]

Mon, 3 Mar 2003 13:00:16 EST

57 lines

New Thread

PCB thickness vs Hole side ( ASPECT Rratio )

PCB thickness vs Hole side ( ASPECT Rratio )

Victor Hernandez <[log in to unmask]>

Fri, 21 Mar 2003 10:47:08 -0600

30 lines

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Paul Holloway <[log in to unmask]>

Fri, 21 Mar 2003 11:33:21 -0600

64 lines

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Guy Ramsey <[log in to unmask]>

Fri, 21 Mar 2003 16:04:25 -0500

59 lines

Re: PCB thickness vs Hole side ( ASPECT Rratio )

Werner Engelmaier <[log in to unmask]>

Sat, 22 Mar 2003 12:30:49 EST

31 lines

New Thread

Picture of PWB delamination

Picture of PWB delamination

Werner Engelmaier <[log in to unmask]>

Sun, 2 Mar 2003 22:16:58 EST

27 lines

Re: Picture of PWB delamination

Gaby Bogdan <[log in to unmask]>

Mon, 3 Mar 2003 12:25:29 +0200

65 lines

Re: Picture of PWB delamination

[log in to unmask]

Mon, 3 Mar 2003 09:58:39 EST

54 lines

New Thread

Plastic

Plastic

Stolar, Paul W <[log in to unmask]>

Wed, 26 Mar 2003 16:57:21 -0600

188 lines

Re: Plastic

jim <[log in to unmask]>

Wed, 26 Mar 2003 17:10:52 -0600

264 lines

Re: Plastic

Crepeau, Phil <[log in to unmask]>

Wed, 26 Mar 2003 15:45:49 -0800

277 lines

Re: Plastic

Juan T. Marugán <[log in to unmask]>

Thu, 27 Mar 2003 03:16:04 -0600

19 lines

Re: Plastic

Eric Christison <[log in to unmask]>

Thu, 27 Mar 2003 09:57:16 +0000

57 lines

Re: Plastic

Stolar, Paul W <[log in to unmask]>

Thu, 27 Mar 2003 08:31:47 -0600

89 lines

Re: Plastic

Blair K. Hogg <[log in to unmask]>

Thu, 27 Mar 2003 09:41:07 -0500

39 lines

Re: Plastic

Lakshmi Dwivedula <[log in to unmask]>

Thu, 27 Mar 2003 09:49:40 -0500

124 lines

New Thread

PLCC socket removal

PLCC socket removal

Black, Paul <[log in to unmask]>

Tue, 4 Mar 2003 13:23:46 -0500

83 lines

Re: PLCC socket removal

Kathy Kuhlow <[log in to unmask]>

Tue, 4 Mar 2003 12:30:46 -0600

60 lines

Re: PLCC socket removal

Charles Caswell <[log in to unmask]>

Tue, 4 Mar 2003 12:53:24 -0600

158 lines

Re: PLCC socket removal

Jeff Ferry <[log in to unmask]>

Tue, 4 Mar 2003 13:52:30 -0500

157 lines

Re: PLCC socket removal

ME Magnin <[log in to unmask]>

Wed, 5 Mar 2003 09:05:48 +0100

201 lines

New Thread

Probimer 65 - Probimer 77

Probimer 65 - Probimer 77

Zweigart, Siegmund <[log in to unmask]>

Wed, 5 Mar 2003 16:33:40 +0100

54 lines

Re: Probimer 65 - Probimer 77

Barmuta, Mike <[log in to unmask]>

Wed, 5 Mar 2003 11:01:42 -0800

104 lines

New Thread

Problem of delamination with a silver filled board

Problem of delamination with a silver filled board

Arbour, Michel <[log in to unmask]>

Mon, 10 Mar 2003 13:45:56 -0500

53 lines

Re: Problem of delamination with a silver filled board

Mcmaster, Michael <[log in to unmask]>

Mon, 10 Mar 2003 16:50:46 -0800

272 lines

Re: Problem of delamination with a silver filled board

Dougal Stewart <[log in to unmask]>

Tue, 11 Mar 2003 09:21:38 -0000

97 lines

Re: Problem of delamination with a silver filled board

[log in to unmask]

Tue, 11 Mar 2003 14:40:08 EST

61 lines

New Thread

Properties of copper foil

Properties of copper foil

Jim <[log in to unmask]>

Mon, 24 Mar 2003 14:32:48 -0600

24 lines

Re: Properties of copper foil

Brummer Chuck <[log in to unmask]>

Mon, 24 Mar 2003 14:21:51 -0800

128 lines

Re: Properties of copper foil

Werner Engelmaier <[log in to unmask]>

Mon, 24 Mar 2003 21:07:27 EST

44 lines

New Thread

PTH clearance between pad and gnd plane

PTH clearance between pad and gnd plane

Phil Nutting <[log in to unmask]>

Thu, 27 Mar 2003 09:38:18 -0500

34 lines

Re: PTH clearance between pad and gnd plane

Eddie Rocha <[log in to unmask]>

Thu, 27 Mar 2003 09:15:10 -0800

24 lines

Re: PTH clearance between pad and gnd plane

[log in to unmask]

Fri, 28 Mar 2003 07:52:22 +0800

104 lines

Re: PTH clearance between pad and gnd plane

Phil Nutting <[log in to unmask]>

Mon, 31 Mar 2003 12:22:00 -0500

151 lines

Re: PTH clearance between pad and gnd plane

Genny Gibbard <[log in to unmask]>

Mon, 31 Mar 2003 11:27:43 -0600

75 lines

Re: PTH clearance between pad and gnd plane

Phil Nutting <[log in to unmask]>

Mon, 31 Mar 2003 12:34:48 -0500

113 lines

New Thread

QTA becomes a CLEAN Machine!

QTA becomes a CLEAN Machine!

Ed Popielarski <[log in to unmask]>

Sat, 1 Mar 2003 07:57:59 -0800

158 lines

Re: QTA becomes a CLEAN Machine!

Randy Bock Sr. <[log in to unmask]>

Sat, 1 Mar 2003 14:13:30 -0500

246 lines

New Thread

Question about crimping

Question about crimping

Juan T. Marugán <[log in to unmask]>

Wed, 12 Mar 2003 01:16:39 -0600

40 lines

Re: Question about crimping

BRAD VANDERHOOF <[log in to unmask]>

Tue, 11 Mar 2003 23:41:45 -0800

76 lines

Re: Question about crimping

Kasprzak, Bill (sys) USX <[log in to unmask]>

Wed, 12 Mar 2003 08:38:02 -0500

98 lines

Re: Question about crimping

Phil Nutting <[log in to unmask]>

Wed, 12 Mar 2003 08:54:22 -0500

127 lines

Re: Question about crimping

Grabski III, John R. <[log in to unmask]>

Wed, 12 Mar 2003 12:43:35 -0500

136 lines

Re: Question about crimping

Juan T. Marugán <[log in to unmask]>

Thu, 13 Mar 2003 07:53:26 -0600

26 lines

New Thread

Recycling

Re: Recycling

Lakshmi Dwivedula <[log in to unmask]>

Mon, 3 Mar 2003 10:08:22 -0500

140 lines

Re: Recycling

Barr, Bob <[log in to unmask]>

Mon, 3 Mar 2003 10:20:50 -0500

70 lines

New Thread

reliabillity standards

reliabillity standards

Eddie Rocha <[log in to unmask]>

Thu, 13 Mar 2003 16:52:19 -0800

26 lines

New Thread

Renewal notice on Technet

Renewal notice on Technet

Keach Sasamori <[log in to unmask]>

Thu, 27 Mar 2003 10:18:59 -0600

237 lines

Re: Renewal notice on Technet

Randy Bock Sr. <[log in to unmask]>

Thu, 27 Mar 2003 13:16:33 -0500

268 lines

New Thread

Repairing

Repairing

Cagle, James <[log in to unmask]>

Fri, 21 Mar 2003 12:33:13 -0500

35 lines

Re: Repairing

Dave Chapman <[log in to unmask]>

Fri, 21 Mar 2003 11:49:53 -0600

63 lines

Re: Repairing

Guy Ramsey <[log in to unmask]>

Fri, 21 Mar 2003 13:09:34 -0500

56 lines

New Thread

Report card

Report card

Malewicz Wesley <[log in to unmask]>

Wed, 5 Mar 2003 13:13:01 -0500

78 lines

New Thread

Request for help ESD Simulator.

Re: Request for help ESD Simulator.

Randy Bock Sr. <[log in to unmask]>

Mon, 3 Mar 2003 16:04:02 -0500

84 lines

New Thread

Roller Tinned PCB's

Roller Tinned PCB's

Michael Bell <[log in to unmask]>

Tue, 25 Mar 2003 07:39:14 +1100

31 lines

Re: Roller Tinned PCB's

Russ Steiner <[log in to unmask]>

Mon, 24 Mar 2003 16:01:06 -0500

81 lines

Re: Roller Tinned PCB's

Mcmaster, Michael <[log in to unmask]>

Mon, 24 Mar 2003 14:43:14 -0800

297 lines

Re: Roller Tinned PCB's

Brian Ellis <[log in to unmask]>

Tue, 25 Mar 2003 10:27:20 +0200

83 lines

Re: Roller Tinned PCB's

paul reid <[log in to unmask]>

Tue, 25 Mar 2003 07:24:53 -0500

70 lines

Re: Roller Tinned PCB's

Mike Fenner <[log in to unmask]>

Tue, 25 Mar 2003 14:29:17 -0000

130 lines

Re: Roller Tinned PCB's

Gary Camac <[log in to unmask]>

Tue, 25 Mar 2003 10:01:37 -0600

63 lines

New Thread

Screwing in place fine-pitch SMT connectors

Screwing in place fine-pitch SMT connectors

McCall,Doug <[log in to unmask]>

Thu, 20 Mar 2003 14:48:50 -0000

47 lines

Re: Screwing in place fine-pitch SMT connectors

Morse, Carrie <[log in to unmask]>

Thu, 20 Mar 2003 10:13:39 -0500

77 lines

Re: Screwing in place fine-pitch SMT connectors

Crepeau, Phil <[log in to unmask]>

Thu, 20 Mar 2003 07:15:15 -0800

79 lines

Re: Screwing in place fine-pitch SMT connectors

Morse, Carrie <[log in to unmask]>

Thu, 20 Mar 2003 10:19:13 -0500

110 lines

Re: Screwing in place fine-pitch SMT connectors

Zweigart, Siegmund <[log in to unmask]>

Thu, 20 Mar 2003 16:21:52 +0100

146 lines

New Thread

Set TechNet NOMAIL

Set TechNet NOMAIL

Olivia Mc Dermott <[log in to unmask]>

Tue, 4 Mar 2003 13:48:23 +0000

24 lines

New Thread

shelf life of spare parts - electronic units

shelf life of spare parts - electronic units

Sklenar Vit (RBAU-EB/MGE4) <[log in to unmask]>

Wed, 26 Mar 2003 08:28:16 +1100

383 lines

Re: shelf life of spare parts - electronic units

Bev Christian <[log in to unmask]>

Tue, 25 Mar 2003 16:57:31 -0500

471 lines

Re: shelf life of spare parts - electronic units

Dan R. Johnson <[log in to unmask]>

Tue, 25 Mar 2003 14:15:51 -0800

25 lines

Re: shelf life of spare parts - electronic units

joyce <[log in to unmask]>

Tue, 25 Mar 2003 17:22:33 -0500

487 lines

Re: shelf life of spare parts - electronic units

[log in to unmask]

Wed, 26 Mar 2003 08:34:46 +0800

443 lines

Re: shelf life of spare parts - electronic units

Dave Hillman <[log in to unmask]>

Tue, 25 Mar 2003 20:37:19 -0600

454 lines

Re: shelf life of spare parts - electronic units

Bev Christian <[log in to unmask]>

Wed, 26 Mar 2003 09:25:07 -0500

527 lines

New Thread

Silver Fill Plugged Vias / Gold Body

Silver Fill Plugged Vias / Gold Body

Ezequiel Cruz <[log in to unmask]>

Mon, 31 Mar 2003 16:23:27 -0600

35 lines

Re: Silver Fill Plugged Vias / Gold Body

Bill Decray <[log in to unmask]>

Mon, 31 Mar 2003 17:50:39 -0500

80 lines

Re: Silver Fill Plugged Vias / Gold Body

Eddie Rocha <[log in to unmask]>

Mon, 31 Mar 2003 15:05:01 -0800

35 lines

Re: Silver Fill Plugged Vias / Gold Body

Ted Kong <[log in to unmask]>

Mon, 31 Mar 2003 15:25:14 -0800

81 lines

Re: Silver Fill Plugged Vias / Gold Body

[log in to unmask]

Tue, 1 Apr 2003 08:19:07 +0800

117 lines

New Thread

Smoke damage to electronic assemblies

Smoke damage to electronic assemblies

Grant Emandien <[log in to unmask]>

Wed, 26 Mar 2003 16:09:05 +0200

50 lines

Re: Smoke damage to electronic assemblies

Blair K. Hogg <[log in to unmask]>

Wed, 26 Mar 2003 09:18:48 -0500

106 lines

Re: Smoke damage to electronic assemblies

Randy Bock Sr. <[log in to unmask]>

Wed, 26 Mar 2003 09:24:33 -0500

97 lines

Re: Smoke damage to electronic assemblies

Guy Ramsey <[log in to unmask]>

Wed, 26 Mar 2003 09:29:10 -0500

55 lines

Re: Smoke damage to electronic assemblies

Ofer Cohen <[log in to unmask]>

Wed, 26 Mar 2003 16:51:23 +0200

107 lines

Re: Smoke damage to electronic assemblies

Bev Christian <[log in to unmask]>

Wed, 26 Mar 2003 09:56:46 -0500

154 lines

Re: Smoke damage to electronic assemblies

Steve Gregory <[log in to unmask]>

Wed, 26 Mar 2003 11:28:18 EST

149 lines

Re: Smoke damage to electronic assemblies

Eric Dawson <[log in to unmask]>

Wed, 26 Mar 2003 16:48:57 -0000

104 lines

Re: Smoke damage to electronic assemblies

Barr, Bob <[log in to unmask]>

Wed, 26 Mar 2003 12:02:26 -0500

118 lines

Re: Smoke damage to electronic assemblies

Steve Gregory <[log in to unmask]>

Wed, 26 Mar 2003 12:12:11 EST

87 lines

Re: Smoke damage to electronic assemblies

David Douthit <[log in to unmask]>

Wed, 26 Mar 2003 11:37:27 -0700

79 lines

Re: Smoke damage to electronic assemblies

[log in to unmask]

Thu, 27 Mar 2003 13:10:50 +0800

127 lines

New Thread

SMT Component Standoffs

SMT Component Standoffs

Bev Christian <[log in to unmask]>

Thu, 20 Mar 2003 12:56:18 -0500

32 lines

Re: SMT Component Standoffs

Guy Ramsey <[log in to unmask]>

Thu, 20 Mar 2003 13:17:55 -0500

64 lines

Re: SMT Component Standoffs

Bev Christian <[log in to unmask]>

Thu, 20 Mar 2003 13:31:14 -0500

77 lines

Re: SMT Component Standoffs

Guy Ramsey <[log in to unmask]>

Thu, 20 Mar 2003 14:28:19 -0500

115 lines

Re: SMT Component Standoffs

Bev Christian <[log in to unmask]>

Thu, 20 Mar 2003 14:30:44 -0500

127 lines

Re: SMT Component Standoffs

Mel Parrish <[log in to unmask]>

Thu, 20 Mar 2003 15:17:57 -0600

170 lines

Re: SMT Component Standoffs

Bev Christian <[log in to unmask]>

Thu, 20 Mar 2003 17:30:17 -0500

186 lines

Re: SMT Component Standoffs

Werner Engelmaier <[log in to unmask]>

Fri, 21 Mar 2003 09:15:51 EST

29 lines

Re: SMT Component Standoffs

[log in to unmask]

Fri, 21 Mar 2003 11:47:17 EST

60 lines

New Thread

Sn97Cu3 solder

Sn97Cu3 solder

Phillip Hinton <[log in to unmask]>

Fri, 21 Mar 2003 11:33:04 EST

62 lines

Re: Sn97Cu3 solder

Mike Fenner <[log in to unmask]>

Fri, 21 Mar 2003 17:26:34 -0000

163 lines

New Thread

Solder analysis for 63/37

Solder analysis for 63/37

Paul Truit <[log in to unmask]>

Fri, 14 Mar 2003 11:04:56 -0500

48 lines

Re: Solder analysis for 63/37

Morse, Carrie <[log in to unmask]>

Fri, 14 Mar 2003 11:19:34 -0500

80 lines

Re: Solder analysis for 63/37

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Fri, 14 Mar 2003 11:22:59 -0500

92 lines

Re: Solder analysis for 63/37

Mike Fenner <[log in to unmask]>

Fri, 14 Mar 2003 16:29:35 -0000

127 lines

Re: Solder analysis for 63/37

Guy Ramsey <[log in to unmask]>

Fri, 14 Mar 2003 11:31:57 -0500

69 lines

Re: Solder analysis for 63/37

Brian Ellis <[log in to unmask]>

Fri, 14 Mar 2003 18:58:38 +0200

96 lines

Re: Solder analysis for 63/37

joyce <[log in to unmask]>

Fri, 14 Mar 2003 12:43:19 -0500

87 lines

Re: Solder analysis for 63/37

BRAD VANDERHOOF <[log in to unmask]>

Sat, 15 Mar 2003 02:16:33 -0800

149 lines

Re: Solder analysis for 63/37

Paul Truit <[log in to unmask]>

Mon, 17 Mar 2003 09:08:08 -0500

34 lines

Re: Solder analysis for 63/37

Mike Fenner <[log in to unmask]>

Mon, 17 Mar 2003 16:01:28 -0000

64 lines

Re: Solder analysis for 63/37

Louis Hart <[log in to unmask]>

Mon, 17 Mar 2003 14:04:16 -0500

38 lines

New Thread

Solder ball composition

Solder ball composition

Victor Hernandez <[log in to unmask]>

Thu, 6 Mar 2003 14:40:06 -0600

88 lines

Re: Solder ball composition

Nowland, Russell Howard (Russell) <[log in to unmask]>

Thu, 6 Mar 2003 14:47:57 -0600

136 lines

Re: Solder ball composition

Blair K. Hogg <[log in to unmask]>

Thu, 6 Mar 2003 16:00:07 -0500

125 lines

Re: Solder ball composition

Nowland, Russell Howard (Russell) <[log in to unmask]>

Thu, 6 Mar 2003 15:19:41 -0600

182 lines

Re: Solder ball composition

Devlin, Dan <[log in to unmask]>

Thu, 6 Mar 2003 16:27:33 -0500

185 lines

Re: Solder ball composition

Hernandez, Victor G <[log in to unmask]>

Fri, 7 Mar 2003 06:49:01 -0600

337 lines

Re: Solder ball composition

paresh limaye <[log in to unmask]>

Fri, 7 Mar 2003 14:17:47 +0100

360 lines

New Thread

Solder Paste with 0.4% silver

Solder Paste with 0.4% silver

Poh Kong Hui <[log in to unmask]>

Sat, 22 Mar 2003 19:50:17 +0800

36 lines

Re: Solder Paste with 0.4% silver

Jason W. Gregory <[log in to unmask]>

Sat, 22 Mar 2003 06:31:38 -0600

92 lines

Re: Solder Paste with 0.4% silver

Dave Hillman <[log in to unmask]>

Mon, 24 Mar 2003 11:08:14 -0600

88 lines

New Thread

Solvents document

Solvents document

Brian Ellis <[log in to unmask]>

Mon, 3 Mar 2003 15:00:30 +0200

58 lines

New Thread

Splicing 8mm SMT tape

Splicing 8mm SMT tape

Hal Winslow <[log in to unmask]>

Wed, 12 Mar 2003 13:12:39 -0500

46 lines

New Thread

Squeegee blades for printers

Squeegee blades for printers

Rama Vemulapalli <[log in to unmask]>

Tue, 18 Mar 2003 14:14:15 -0800

60 lines

Re: Squeegee blades for printers

Jason W. Gregory <[log in to unmask]>

Tue, 18 Mar 2003 16:32:54 -0600

97 lines

Re: Squeegee blades for printers

[log in to unmask]

Tue, 18 Mar 2003 17:57:51 EST

48 lines

Re: Squeegee blades for printers

Coleman, Bill <[log in to unmask]>

Tue, 18 Mar 2003 17:53:09 -0700

82 lines

Re: Squeegee blades for printers

David Fish <[log in to unmask]>

Tue, 18 Mar 2003 20:10:53 -0500

184 lines

Re: Squeegee blades for printers

Steve Gregory <[log in to unmask]>

Tue, 18 Mar 2003 20:17:49 EST

133 lines

Re: Squeegee blades for printers

David Fish <[log in to unmask]>

Tue, 18 Mar 2003 20:22:24 -0500

331 lines

Re: Squeegee blades for printers

Steve Gregory <[log in to unmask]>

Tue, 18 Mar 2003 20:29:38 EST

76 lines

Re: Squeegee blades for printers

BRAD VANDERHOOF <[log in to unmask]>

Wed, 19 Mar 2003 00:20:10 -0800

230 lines

Re: Squeegee blades for printers

Mike Fenner <[log in to unmask]>

Wed, 19 Mar 2003 09:11:56 -0000

105 lines

Re: Squeegee blades for printers

Jowan Iven <[log in to unmask]>

Wed, 19 Mar 2003 10:45:00 +0100

231 lines

Re: Squeegee blades for printers

Dan R. Johnson <[log in to unmask]>

Wed, 19 Mar 2003 07:54:13 -0800

79 lines

Re: Squeegee blades for printers

Vivari, John <[log in to unmask]>

Thu, 20 Mar 2003 09:04:39 -0500

68 lines

New Thread

T&E testing at high temp

T&E testing at high temp

Gerard O'Brien <[log in to unmask]>

Mon, 3 Mar 2003 13:15:44 -0500

180 lines

New Thread

TCE above Tg for Dupont CB100 silver resin

TCE above Tg for Dupont CB100 silver resin

Arbour, Michel <[log in to unmask]>

Fri, 21 Mar 2003 14:51:45 -0500

27 lines

Re: TCE above Tg for Dupont CB100 silver resin

Barbara Burcham <[log in to unmask]>

Fri, 21 Mar 2003 14:14:06 -0600

69 lines

Re: TCE above Tg for Dupont CB100 silver resin

Guy Ramsey <[log in to unmask]>

Fri, 21 Mar 2003 16:00:55 -0500

41 lines

New Thread

Technical Conference for IPC Printed Circuits Expo 2003

Technical Conference for IPC Printed Circuits Expo 2003

Timothy A. Estes <[log in to unmask]>

Mon, 3 Mar 2003 12:51:56 -0700

202 lines

New Thread

test

test

[log in to unmask]

Thu, 6 Mar 2003 21:05:59 -0800

42 lines

New Thread

Test coupon for Impedance Control Board.

Test coupon for Impedance Control Board.

Raghavendra Rao <[log in to unmask]>

Tue, 18 Mar 2003 17:43:49 +0530

61 lines

Re: Test coupon for Impedance Control Board.

Arvin M. <[log in to unmask]>

Wed, 19 Mar 2003 09:19:25 +0800

106 lines

Re: Test coupon for Impedance Control Board.

Brian Butler <[log in to unmask]>

Tue, 18 Mar 2003 19:40:04 -0700

90 lines

Re: Test coupon for Impedance Control Board.

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Wed, 19 Mar 2003 14:45:41 -0000

139 lines

Re: Test coupon for Impedance Control Board.

Steve MacDonald <[log in to unmask]>

Wed, 19 Mar 2003 11:56:07 -0500

199 lines

Re: Test coupon for Impedance Control Board.

Karl Sauter <[log in to unmask]>

Wed, 19 Mar 2003 09:11:00 -0800

177 lines

New Thread

testing Procedures for ESD ground mats

Re: testing Procedures for ESD ground mats

Anthony York <[log in to unmask]>

Mon, 3 Mar 2003 11:00:50 +1000

165 lines

Re: testing Procedures for ESD ground mats

Paul Signorelli <[log in to unmask]>

Mon, 3 Mar 2003 09:20:34 -0600

85 lines

Testing Procedures for ESD ground mats

Gene Felder <[log in to unmask]>

Mon, 3 Mar 2003 08:33:26 -0800

107 lines

New Thread

Thanks to those who offered advice on smoke damage

Thanks to those who offered advice on smoke damage

Grant Emandien <[log in to unmask]>

Thu, 27 Mar 2003 15:44:55 +0200

49 lines

Re: Thanks to those who offered advice on smoke damage

Ofer Cohen <[log in to unmask]>

Thu, 27 Mar 2003 15:50:53 +0200

91 lines

Re: Thanks to those who offered advice on smoke damage

Randy Bock Sr. <[log in to unmask]>

Thu, 27 Mar 2003 08:58:29 -0500

89 lines

New Thread

The relations between mulit-layers and thermal transition

The relations between mulit-layers and thermal transition

Jason Cheng <[log in to unmask]>

Wed, 19 Mar 2003 16:00:37 +0800

21 lines

New Thread

tin stripping

tin stripping

Martin Goosey <[log in to unmask]>

Fri, 21 Mar 2003 18:10:45 +0000

46 lines

Re: tin stripping

[log in to unmask]

Fri, 21 Mar 2003 14:28:21 EST

54 lines

Re: tin stripping

Rudy Sedlak <[log in to unmask]>

Sat, 22 Mar 2003 00:07:33 EST

68 lines

New Thread

tined wire with insulated lug

tined wire with insulated lug

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 4 Mar 2003 09:02:27 -0500

54 lines

Re: tined wire with insulated lug

Kathy Kuhlow <[log in to unmask]>

Tue, 4 Mar 2003 08:42:15 -0600

74 lines

Re: tined wire with insulated lug

Phil Nutting <[log in to unmask]>

Tue, 4 Mar 2003 10:00:25 -0500

96 lines

Re: tined wire with insulated lug

Grabski III, John R. <[log in to unmask]>

Tue, 4 Mar 2003 10:08:16 -0500

147 lines

New Thread

Tinning requirements

Tinning requirements

Mummert, Randy <[log in to unmask]>

Wed, 12 Mar 2003 16:22:35 -0600

92 lines

Re: Tinning requirements

Dave Hillman <[log in to unmask]>

Wed, 12 Mar 2003 17:13:01 -0600

105 lines

New Thread

Torque Testers

Torque Testers

Rich Lasko <[log in to unmask]>

Wed, 5 Mar 2003 15:24:46 -0600

220 lines

Re: Torque Testers

Randy Bock Sr. <[log in to unmask]>

Wed, 5 Mar 2003 17:05:15 -0500

321 lines

Re: Torque Testers

James R. Berry <[log in to unmask]>

Thu, 6 Mar 2003 07:36:37 -0500

96 lines

New Thread

Trace Current Capacity w/ Occasional Spikes

Trace Current Capacity w/ Occasional Spikes

Brown, William G <[log in to unmask]>

Fri, 7 Mar 2003 05:15:04 -0500

48 lines

New Thread

Ultrasonic Cleaning of Black Anodized Parts?

Ultrasonic Cleaning of Black Anodized Parts?

Morse, Carrie <[log in to unmask]>

Tue, 11 Mar 2003 17:57:07 -0500

38 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Tom Waznis <[log in to unmask]>

Tue, 11 Mar 2003 15:20:15 -0800

73 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Brian Ellis <[log in to unmask]>

Wed, 12 Mar 2003 09:22:34 +0200

78 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

BRAD VANDERHOOF <[log in to unmask]>

Tue, 11 Mar 2003 23:50:24 -0800

68 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Dan R. Johnson <[log in to unmask]>

Wed, 12 Mar 2003 08:41:07 -0800

28 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Brian Ellis <[log in to unmask]>

Thu, 13 Mar 2003 11:20:23 +0200

48 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Geoff Layhe <[log in to unmask]>

Thu, 13 Mar 2003 10:11:42 -0000

84 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Guy Ramsey <[log in to unmask]>

Thu, 13 Mar 2003 06:16:27 -0500

83 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Dennis Fritz <[log in to unmask]>

Thu, 13 Mar 2003 10:03:37 EST

46 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Rudy Sedlak <[log in to unmask]>

Thu, 13 Mar 2003 22:01:13 EST

64 lines

Re: Ultrasonic Cleaning of Black Anodized Parts?

Munie, Gregory <[log in to unmask]>

Fri, 14 Mar 2003 10:14:56 -0600

136 lines

New Thread

Underfill BGA on Backplane?

Underfill BGA on Backplane?

Liu Changkang <[log in to unmask]>

Mon, 24 Mar 2003 18:05:44 +0800

68 lines

New Thread

Via Fill and Soldermask

Via Fill and Soldermask

Hendy, LeRoy <[log in to unmask]>

Wed, 19 Mar 2003 20:27:55 -0500

79 lines

Re: Via Fill and Soldermask

David Fish <[log in to unmask]>

Thu, 20 Mar 2003 06:47:06 -0500

159 lines

Re: Via Fill and Soldermask

joyce <[log in to unmask]>

Thu, 20 Mar 2003 08:33:33 -0500

229 lines

Re: Via Fill and Soldermask

Crepeau, Phil <[log in to unmask]>

Thu, 20 Mar 2003 07:07:51 -0800

145 lines

Re: Via Fill and Soldermask

[log in to unmask]

Thu, 20 Mar 2003 12:31:56 -0500

114 lines

Re: Via Fill and Soldermask

Tim Reeves <[log in to unmask]>

Thu, 20 Mar 2003 11:36:21 -0800

306 lines

Re: Via Fill and Soldermask

Randy Bock Sr. <[log in to unmask]>

Thu, 20 Mar 2003 15:17:55 -0500

389 lines

Re: Via Fill and Soldermask

Randy Bock Sr. <[log in to unmask]>

Thu, 20 Mar 2003 15:22:27 -0500

382 lines

Re: Via Fill and Soldermask

Quality <[log in to unmask]>

Thu, 20 Mar 2003 16:25:15 -0500

25 lines

Re: Via Fill and Soldermask

Crepeau, Phil <[log in to unmask]>

Thu, 20 Mar 2003 13:39:32 -0800

50 lines

New Thread

Void

Void

Yannick Brisson <[log in to unmask]>

Tue, 11 Mar 2003 08:14:00 -0500

63 lines

Re: Void

Rick Thompson <[log in to unmask]>

Tue, 11 Mar 2003 06:57:00 -0800

87 lines

New Thread

Welcome

Welcome

Arturo Medellin <[log in to unmask]>

Sat, 8 Mar 2003 09:09:56 -0600

72 lines

Re: Welcome

Randy Bock Sr. <[log in to unmask]>

Sat, 8 Mar 2003 10:36:09 -0500

139 lines

Re: Welcome

Dan Mauro <[log in to unmask]>

Sat, 8 Mar 2003 10:42:31 -0600

134 lines

Re: Welcome

LINO REBOREDO <[log in to unmask]>

Sat, 8 Mar 2003 16:40:45 +0000

67 lines

Re: Welcome

Leigh-Ann Litavis <[log in to unmask]>

Mon, 10 Mar 2003 09:39:59 EST

27 lines

New Thread

Wirebonding

Wirebonding

Mike Kuczynski <[log in to unmask]>

Fri, 7 Mar 2003 16:10:04 -0500

115 lines

Re: Wirebonding

Joe Fjelstad <[log in to unmask]>

Fri, 7 Mar 2003 19:03:23 EST

89 lines

New Thread

Wirebonding Plating

Wirebonding Plating

Mike Kuczynski <[log in to unmask]>

Mon, 17 Mar 2003 08:46:54 -0500

114 lines

Re: Wirebonding Plating

Quality <[log in to unmask]>

Thu, 20 Mar 2003 16:45:13 -0500

49 lines

New Thread

Zebra Printer Labels

Zebra Printer Labels

Grabski III, John R. <[log in to unmask]>

Thu, 20 Mar 2003 07:08:41 -0500

302 lines

Re: Zebra Printer Labels

Dan R. Johnson <[log in to unmask]>

Thu, 20 Mar 2003 09:26:24 -0800

77 lines

Re: Zebra Printer Labels

Kasprzak, Bill (sys) USX <[log in to unmask]>

Thu, 20 Mar 2003 14:38:58 -0500

88 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager