LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


June 2001


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"Paradigm" ERP software by Cimnet (2 messages)
"Touchy" Question... (13 messages)
**** PCB's - HASL -v- OSP (11 messages)
0201 land pattern and stencil successes, failures and recommendat ions (3 messages)
620 (2 messages)
: BGA Inspection (1 message)
: TEST PROBES WITH BLACK COLORATION ON SLIDING AREA (1 message)
<No subject> (2 messages)
A solution to white residues after smt rework ... (7 messages)
alternative oxide (1 message)
Antw: [TN] UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED (1 message)
Antw: [TN] voids in BGA (3 messages)
Arbitration Clauses (4 messages)
ATTN: No Clean Solder Users (4 messages)
AW: [TN] Cotton Gloves/Finger Cots (1 message)
AW: [TN] Lifted components (MELF Cylindrical Diodes) (1 message)
AW: [TN] Surface Mount Reverse/Back mount LED (2 messages)
Barcode Readers (1 message)
Bare board shelf Life (2 messages)
BGA (5 messages)
BGA Max temps & times? (2 messages)
BGA package warpage characterization (1 message)
BGA Xray Inspection: 100% or SPC controlled (5 messages)
Black Pad... (4 messages)
Board Thickness (3 messages)
Capacitor Values drifting after temperature cycling (2 messages)
Choice of PWB substrate for "oil bath" operation (2 messages)
Circuit Board Disposal (7 messages)
clean air (4 messages)
Cleaning of assemblies after hand soldering (4 messages)
Coating and Coates Mask (1 message)
Coating vs. UL-approval (2 messages)
Component F/A continues with more ugly pics (3 messages)
Component Underfill Material Search (1 message)
Conductive Paint...... (1 message)
Conformal coating (8 messages)
Conformal coating or not ? (3 messages)
Conformal coating: white haze (7 messages)
Cooling Rates (1 message)
Copper Plating Aluminum (6 messages)
Cotton Gloves/Finger Cots (1 message)
cracking GaAs dice (1 message)
Delamination Blisters... (6 messages)
DFM & DFT guide (1 message)
Double Postings (2 messages)
Dross reclaim (2 messages)
Dual Side Reflow with A Pallet (3 messages)
Dumb question (3 messages)
Earls latest picture... (1 message)
Electroplating coating for Metallographic Preparation (6 messages)
Equivalent BS specs (1 message)
ERP Recommendations (3 messages)
ESD & Unsealed Concrete (6 messages)
ESD QUESTION (2 messages)
Etching AuSn (1 message)
Exposed copper (5 messages)
Feedback wanted on Registred Instructor IPC-7711/7721 training (1 message)
Feedback wanted on Registred Instructor IPC-7711/7721training (2 messages)
flex buried via fill? (1 message)
Flexible Circuit Board Material Resoure (1 message)
flowing solder pot (3 messages)
Freshness of Components (1 message)
FW: dispensing glue (4 messages)
FW: [TN] Exposed copper (1 message)
Glue Nozzle Cleaning (8 messages)
Hand Soldering 0201 and 0402 components (4 messages)
Hi-Temp Masking Tape (3 messages)
High speed paste dispensing (6 messages)
High speed paste dispensing (with Indium) (1 message)
Hole size (2 messages)
Hot Bar Soldering (4 messages)
Hot Plates (3 messages)
How do you reflow? (7 messages)
How do you reflow? ( (1 message)
How to design a PCB with buried resistors (1 message)
ICT and Burn-In Services (1 message)
ICT and Burn-In Test Services (1 message)
ICT calibration (4 messages)
ICT Specifications. (3 messages)
Immersion Silver (4 messages)
Immersion silver boards tarnish (2 messages)
In-line Cleaner (7 messages)
Industry Indicators (3 messages)
IPC-D-275 (2 messages)
ISO 9000-2000 "Handbook" (3 messages)
Its too darn hot to work (9 messages)
Its too darn hot to work, a webpage... (1 message)
J-STD-002 and -003 solderability testing... (3 messages)
JEDEK Compliancy? (2 messages)
JEDEK trays (1 message)
jump score, anyone? (2 messages)
Laser Drill (3 messages)
Laser Drilling (1 message)
Laser Trimmer for Ceramic Substrate Traces/Wires (1 message)
Latest Info. using White Tin (1 message)
Looking for a "special" solder paste dispenser (13 messages)
Looking for current carrying capacity of vias. (3 messages)
Looking for Larry Fisher (1 message)
Looking for Solderability Test Service (3 messages)
Low Temp Solder with Bismuth?? (4 messages)
Make your hotel reservations now for APEX 2002 (1 message)
Manual inspection related stuff (4 messages)
Marking (6 messages)
Measling... (14 messages)
MIL-STD-454 (4 messages)
Minimum requirements for final rinse in assembled boards (5 messages)
Moisture Absorption & Plasma Desmear (3 messages)
Moisture Barrier Bag WVTR (1 message)
Moisture Barrier Dry-Pack Requirements (1 message)
Moisture Sensitive Components (2 messages)
Multilayer Ceramic Chip Capacitors Quality (9 messages)
Multiple Thermal Stress (5 messages)
MultiUser Software (2 messages)
Need Sony CPD-1201/9000 monitor (2 messages)
Nelco laminate (1 message)
New Domain (2 messages)
New Domain - Red faced, AGAIN! (3 messages)
Ni thickness (4 messages)
No Clean and Rosin core on same PCB (5 messages)
Ok conformal coating, but how ? (10 messages)
Oxidized copper pad (2 messages)
Package reliabilty... (7 messages)
Packaging Assistance...Bag & Tag (1 message)
PCB Finish with Mirco-BGA's (1 message)
PCB's with Micro BGA's. (1 message)
Permanent Moisture Sensitivity Indicators? (1 message)
PGL-7 Vs Image Master film (2 messages)
Process Validation (8 messages)
QA Note (7 messages)
RCA Microemulator (1 message)
Re [TN]: PCB Material (2 messages)
RE [TN}: Correction In-Line Cleaner (1 message)
Rod Smith/Endicott/IBM is out of the office. (1 message)
Screen printing (1 message)
Semiconductor Experts (3 messages)
Separation Guidelines For PCB Traces Running Under Components (2 messages)
Shelf life of non-component materials (4 messages)
Silicon Conformal Coatings (5 messages)
SMT adhesive (5 messages)
SMT Glue Dispense (6 messages)
SNEC mtg (1 message)
Solder Dross - So. Calif.?? (1 message)
SOLDER FOIL (6 messages)
solder mask tables (3 messages)
Solder Paste Dispenser (3 messages)
Solder Technology International Webpage (1 message)
Solderability shelf life (1 message)
Soldering socket pin on BGA pads - reliable? (2 messages)
Spacers (7 messages)
Spacing between SMT components? (2 messages)
SPC for PCB (1 message)
Specs for components taping (polarity) (1 message)
Steve's note about lead reporting (1 message)
stitch bars on double-sided boards (4 messages)
Stress screening of bare PCBs (3 messages)
Sulfuric peroxide preplate microetch (5 messages)
Surface Mount Reverse/Back mount LED (5 messages)
Symposium : July 16-21 (1 message)
Talcum powder on wires (3 messages)
Tape and Reel Standards (1 message)
Test - please ignore (1 message)
Thanks for the HOT tips (2 messages)
Thermal Relief (2 messages)
thermal-cycling guidelines (3 messages)
Thin Thermal Pad Materials (4 messages)
Tips and Tricks (1 message)
TN] FW: dispensing glue (1 message)
TRI reporting... (7 messages)
UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED (10 messages)
Universal fixtures (4 messages)
Unusual Cleaning Operation- Help! (1 message)
Update on TRI Lead Rule (1 message)
Vapor Phase Reflow (1 message)
voids in BGA (1 message)
voids in BGA, but really reliability in general (5 messages)
Warp Vs laminate thickness variation in a panel (1 message)
WEIGHT GAIN TESTING (1 message)
Which Solder Mask (2 messages)
X-ray Images (5 messages)
[LF] FT Article (4 messages)
[TN} In-Line Cleaners (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Jason Gregory <[log in to unmask]>

Thu, 21 Jun 2001 08:26:49 -0500

91 lines

Re:

Carl Ray <[log in to unmask]>

Thu, 21 Jun 2001 09:14:23 -0500

92 lines

Re:

Mike Fenner <[log in to unmask]>

Thu, 21 Jun 2001 16:15:39 +0100

109 lines

Re:

Howard Watson <[log in to unmask]>

Thu, 21 Jun 2001 11:58:27 -0400

193 lines

Re:

Mengers, William D. <[log in to unmask]>

Thu, 21 Jun 2001 12:19:02 -0400

181 lines

Re:

Mengers, William D. <[log in to unmask]>

Thu, 21 Jun 2001 12:25:14 -0400

141 lines

Re:

Chris Gifford <[log in to unmask]>

Thu, 21 Jun 2001 13:20:31 -0400

320 lines

Re:

Lou Hart <[log in to unmask]>

Thu, 21 Jun 2001 13:52:39 -0400

164 lines

Re:

Jon Moore <[log in to unmask]>

Thu, 21 Jun 2001 14:31:00 EDT

26 lines

New Thread

"Paradigm" ERP software by Cimnet

"Paradigm" ERP software by Cimnet

Martin Christie <[log in to unmask]>

Thu, 28 Jun 2001 13:41:30 +0100

35 lines

Re: "Paradigm" ERP software by Cimnet

Avigdor Jakubinsky <[log in to unmask]>

Sat, 30 Jun 2001 10:25:21 -0500

26 lines

New Thread

"Touchy" Question...

"Touchy" Question...

Stephen R. Gregory <[log in to unmask]>

Mon, 18 Jun 2001 22:14:02 EDT

102 lines

Re: "Touchy" Question...

Richard Hamilton <[log in to unmask]>

Mon, 18 Jun 2001 20:01:50 -0700

147 lines

Re: "Touchy" Question...

David Douthit <[log in to unmask]>

Mon, 18 Jun 2001 22:10:24 -0700

160 lines

Re: "Touchy" Question...

Bogdan Gabi <[log in to unmask]>

Tue, 19 Jun 2001 11:35:18 +0300

250 lines

Re: "Touchy" Question...

<Peter George Duncan> <[log in to unmask]>

Tue, 19 Jun 2001 17:57:48 +0800

113 lines

Re: "Touchy" Question...

Ed Cosper <[log in to unmask]>

Tue, 19 Jun 2001 07:25:05 -0400

270 lines

Re: "Touchy" Question...

Joyce Koo <[log in to unmask]>

Tue, 19 Jun 2001 08:43:02 -0400

208 lines

Re: "Touchy" Question...

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 19 Jun 2001 09:08:14 -0400

74 lines

Re: "Touchy" Question...

Kathy Kuhlow <[log in to unmask]>

Tue, 19 Jun 2001 08:54:46 -0500

64 lines

Re: "Touchy" Question...

Crepeau, Phil <[log in to unmask]>

Tue, 19 Jun 2001 07:33:56 -0700

66 lines

Re: "Touchy" Question...

Kathy Bergman <[log in to unmask]>

Tue, 19 Jun 2001 17:36:52 -0700

166 lines

Re: "Touchy" Question...

Stephen R. Gregory <[log in to unmask]>

Tue, 19 Jun 2001 21:31:36 EDT

111 lines

Re: "Touchy" Question...

Doty, Mike <[log in to unmask]>

Tue, 19 Jun 2001 21:49:24 -0400

208 lines

New Thread

**** PCB's - HASL -v- OSP

**** PCB's - HASL -v- OSP

Cormac MacMahon <[log in to unmask]>

Thu, 28 Jun 2001 17:56:46 +0100

29 lines

Re: **** PCB's - HASL -v- OSP

Andrew Hoggan <[log in to unmask]>

Thu, 28 Jun 2001 18:52:53 +0100

74 lines

Re: **** PCB's - HASL -v- OSP

[log in to unmask]

Thu, 28 Jun 2001 15:12:03 -0500

53 lines

Re: **** PCB's - HASL -v- OSP

[log in to unmask]

Thu, 28 Jun 2001 16:26:54 EDT

65 lines

Re: **** PCB's - HASL -v- OSP

Ted Tontis <[log in to unmask]>

Thu, 28 Jun 2001 15:34:42 -0500

99 lines

Re: **** PCB's - HASL -v- OSP

[log in to unmask]

Thu, 28 Jun 2001 15:54:03 -0500

84 lines

Re: **** PCB's - HASL -v- OSP

Andrew Hoggan <[log in to unmask]>

Fri, 29 Jun 2001 08:44:23 +0100

96 lines

Re: **** PCB's - HASL -v- OSP

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Fri, 29 Jun 2001 09:03:30 -0400

144 lines

Re: **** PCB's - HASL -v- OSP

Gary McCauley <[log in to unmask]>

Fri, 29 Jun 2001 08:22:49 -0500

102 lines

Re: **** PCB's - HASL -v- OSP

Ted Tontis <[log in to unmask]>

Fri, 29 Jun 2001 08:46:38 -0500

183 lines

Re: **** PCB's - HASL -v- OSP

Steve Abrahamson <[log in to unmask]>

Fri, 29 Jun 2001 09:15:47 -0600

90 lines

New Thread

0201 land pattern and stencil successes, failures and recommendat ions

0201 land pattern and stencil successes, failures and recommendat ions

Bev Christian <[log in to unmask]>

Fri, 8 Jun 2001 13:14:35 -0400

66 lines

Re: 0201 land pattern and stencil successes, failures and recommendat ions

Mike Fenner <[log in to unmask]>

Mon, 11 Jun 2001 13:22:54 +0100

110 lines

Re: 0201 land pattern and stencil successes, failures and recommendat ions

D.Terstegge <[log in to unmask]>

Mon, 11 Jun 2001 21:05:02 +0200

125 lines

New Thread

620

620

Rick Howieson <[log in to unmask]>

Mon, 18 Jun 2001 10:30:50 -0600

24 lines

Re: 620

Jack Crawford <[log in to unmask]>

Mon, 18 Jun 2001 19:08:16 -0500

76 lines

New Thread

: BGA Inspection

Re: : BGA Inspection

Hollandsworth, Ron <[log in to unmask]>

Tue, 19 Jun 2001 13:07:21 -0500

25 lines

New Thread

: TEST PROBES WITH BLACK COLORATION ON SLIDING AREA

: TEST PROBES WITH BLACK COLORATION ON SLIDING AREA

Ashok Dhawan <[log in to unmask]>

Tue, 26 Jun 2001 08:49:20 -0500

104 lines

New Thread

<No subject>

<No subject>

Fernando Gómez <[log in to unmask]>

Mon, 18 Jun 2001 16:58:15 +0200

140 lines

<No subject>

Mengers, William D. <[log in to unmask]>

Thu, 21 Jun 2001 08:55:33 -0400

49 lines

New Thread

A solution to white residues after smt rework ...

A solution to white residues after smt rework ...

Tony Conlon <[log in to unmask]>

Wed, 13 Jun 2001 14:35:41 +0100

34 lines

Re: A solution to white residues after smt rework ...

Guy Ramsey <[log in to unmask]>

Wed, 13 Jun 2001 10:33:53 -0400

77 lines

Re: A solution to white residues after smt rework ...

Graham Naisbitt <[log in to unmask]>

Wed, 13 Jun 2001 15:44:58 +0100

89 lines

Re: A solution to white residues after smt rework ...

Tom B. <[log in to unmask]>

Wed, 13 Jun 2001 11:06:44 -0400

80 lines

Re: A solution to white residues after smt rework ...

Martin Christie <[log in to unmask]>

Wed, 13 Jun 2001 17:09:53 +0100

83 lines

Re: A solution to white residues after smt rework ...

Kathy Kuhlow <[log in to unmask]>

Wed, 13 Jun 2001 14:58:26 -0500

46 lines

Re: A solution to white residues after smt rework ...

Tony Conlon <[log in to unmask]>

Thu, 14 Jun 2001 09:38:09 +0200

52 lines

New Thread

alternative oxide

alternative oxide

Kathy Bergman <[log in to unmask]>

Wed, 6 Jun 2001 13:13:17 -0500

22 lines

New Thread

Antw: [TN] UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Antw: [TN] UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Guenter Grossmann <[log in to unmask]>

Thu, 7 Jun 2001 09:39:05 +0200

52 lines

New Thread

Antw: [TN] voids in BGA

Re: Antw: [TN] voids in BGA

sahmad <[log in to unmask]>

Tue, 5 Jun 2001 09:00:18 -0600

248 lines

Re: Antw: [TN] voids in BGA

Guenter Grossmann <[log in to unmask]>

Wed, 6 Jun 2001 12:35:28 +0200

59 lines

Re: Antw: [TN] voids in BGA

Mike Fenner <[log in to unmask]>

Wed, 6 Jun 2001 12:26:16 +0100

97 lines

New Thread

Arbitration Clauses

Arbitration Clauses

wejlaw <[log in to unmask]>

Tue, 19 Jun 2001 18:27:01 -0700

32 lines

Re: Arbitration Clauses

Brian Ellis <[log in to unmask]>

Wed, 20 Jun 2001 09:44:32 +0300

55 lines

Re: Arbitration Clauses

[log in to unmask]

Wed, 20 Jun 2001 07:58:09 -0500

34 lines

Re: Arbitration Clauses

Richard Hamilton <[log in to unmask]>

Wed, 20 Jun 2001 06:43:22 -0700

58 lines

New Thread

ATTN: No Clean Solder Users

ATTN: No Clean Solder Users

James Tingey <[log in to unmask]>

Thu, 14 Jun 2001 10:47:56 -0500

24 lines

Re: ATTN: No Clean Solder Users

Thomas Han <[log in to unmask]>

Thu, 14 Jun 2001 10:21:33 -0700

49 lines

Re: ATTN: No Clean Solder Users

Douglas Pauls <[log in to unmask]>

Thu, 14 Jun 2001 12:13:07 -0500

44 lines

Re: ATTN: No Clean Solder Users

Mario Hernandez <[log in to unmask]>

Thu, 14 Jun 2001 15:28:43 -0500

85 lines

New Thread

AW: [TN] Cotton Gloves/Finger Cots

AW: [TN] Cotton Gloves/Finger Cots

Busko, Wolfgang <[log in to unmask]>

Fri, 1 Jun 2001 15:33:18 +0200

85 lines

New Thread

AW: [TN] Lifted components (MELF Cylindrical Diodes)

Re: AW: [TN] Lifted components (MELF Cylindrical Diodes)

Sasha Miladinovic <[log in to unmask]>

Tue, 5 Jun 2001 07:09:21 -0500

31 lines

New Thread

AW: [TN] Surface Mount Reverse/Back mount LED

AW: [TN] Surface Mount Reverse/Back mount LED

Busko, Wolfgang <[log in to unmask]>

Tue, 26 Jun 2001 16:21:31 +0200

50 lines

Re: AW: [TN] Surface Mount Reverse/Back mount LED

Galang, Jerry <[log in to unmask]>

Tue, 26 Jun 2001 08:34:10 -0700

100 lines

New Thread

Barcode Readers

Barcode Readers

Anderson, Greg (IndSys, GEFanuc, NA) <[log in to unmask]>

Mon, 18 Jun 2001 16:35:43 -0400

39 lines

New Thread

Bare board shelf Life

Re: Bare board shelf Life

Allen Hu <[log in to unmask]>

Wed, 20 Jun 2001 04:57:34 -0500

40 lines

Re: Bare board shelf Life

Guy Ramsey <[log in to unmask]>

Wed, 20 Jun 2001 07:28:42 -0400

83 lines

New Thread

BGA

BGA

Rick Howieson <[log in to unmask]>

Thu, 28 Jun 2001 11:36:54 -0600

25 lines

Re: BGA

Bartkowaik Christine <[log in to unmask]>

Thu, 28 Jun 2001 13:59:01 -0400

64 lines

Re: BGA

Kathy Kuhlow <[log in to unmask]>

Thu, 28 Jun 2001 13:09:30 -0500

52 lines

Re: BGA

Lush, Dorothy <[log in to unmask]>

Thu, 28 Jun 2001 12:39:13 -0700

69 lines

Re: BGA

<Peter George Duncan> <[log in to unmask]>

Fri, 29 Jun 2001 08:59:49 +0800

76 lines

New Thread

BGA Max temps & times?

BGA Max temps & times?

Bill Butman <[log in to unmask]>

Mon, 11 Jun 2001 11:58:29 -0700

65 lines

Re: BGA Max temps & times?

<Peter George Duncan> <[log in to unmask]>

Tue, 12 Jun 2001 12:18:20 +0800

174 lines

New Thread

BGA package warpage characterization

BGA package warpage characterization

LI YUAN <[log in to unmask]>

Tue, 26 Jun 2001 12:08:27 -0600

28 lines

New Thread

BGA Xray Inspection: 100% or SPC controlled

BGA Xray Inspection: 100% or SPC controlled

Phil Bavaro <[log in to unmask]>

Tue, 19 Jun 2001 10:01:20 -0700

58 lines

Re: BGA Xray Inspection: 100% or SPC controlled

Marsico, James <[log in to unmask]>

Tue, 19 Jun 2001 13:16:30 -0400

99 lines

Re: BGA Xray Inspection: 100% or SPC controlled

Jason Gregory <[log in to unmask]>

Tue, 19 Jun 2001 12:29:03 -0500

96 lines

Re: BGA Xray Inspection: 100% or SPC controlled

Steve Abrahamson <[log in to unmask]>

Tue, 19 Jun 2001 14:03:16 -0600

95 lines

Re: BGA Xray Inspection: 100% or SPC controlled

<Peter George Duncan> <[log in to unmask]>

Wed, 20 Jun 2001 08:55:17 +0800

116 lines

New Thread

Black Pad...

Black Pad...

Stephen R. Gregory <[log in to unmask]>

Wed, 27 Jun 2001 15:20:09 EDT

66 lines

Black Pad...

Stephen R. Gregory <[log in to unmask]>

Wed, 27 Jun 2001 15:38:41 EDT

66 lines

Re: Black Pad...

David Douthit <[log in to unmask]>

Wed, 27 Jun 2001 13:16:31 -0700

112 lines

Re: Black Pad...

Bev Christian <[log in to unmask]>

Wed, 27 Jun 2001 17:05:35 -0400

113 lines

New Thread

Board Thickness

Board Thickness

Bill Decray <[log in to unmask]>

Tue, 19 Jun 2001 08:19:17 -0400

36 lines

Re: Board Thickness

Paul Brionez <[log in to unmask]>

Tue, 19 Jun 2001 07:44:50 -0500

52 lines

Re: Board Thickness

Bogdan Gabi <[log in to unmask]>

Tue, 19 Jun 2001 16:22:48 +0300

221 lines

New Thread

Capacitor Values drifting after temperature cycling

Capacitor Values drifting after temperature cycling

John Fahey <[log in to unmask]>

Wed, 13 Jun 2001 10:45:55 -0500

27 lines

Re: Capacitor Values drifting after temperature cycling

Lou Hart <[log in to unmask]>

Wed, 13 Jun 2001 12:42:20 -0400

56 lines

New Thread

Choice of PWB substrate for "oil bath" operation

Choice of PWB substrate for "oil bath" operation

Phil Nutting <[log in to unmask]>

Wed, 27 Jun 2001 08:35:57 -0400

77 lines

Re: Choice of PWB substrate for "oil bath" operation

Joseph Keary <[log in to unmask]>

Wed, 27 Jun 2001 11:29:41 -0700

126 lines

New Thread

Circuit Board Disposal

Circuit Board Disposal

Chuck Garth <[log in to unmask]>

Thu, 28 Jun 2001 14:13:19 EDT

44 lines

Re: Circuit Board Disposal

gleason <[log in to unmask]>

Thu, 28 Jun 2001 13:29:00 -0700

81 lines

Re: Circuit Board Disposal

Jon Moore <[log in to unmask]>

Thu, 28 Jun 2001 14:39:34 EDT

25 lines

Re: Circuit Board Disposal

Doty, Mike <[log in to unmask]>

Thu, 28 Jun 2001 14:50:16 -0400

75 lines

Re: Circuit Board Disposal

Vandendolder, Ron <[log in to unmask]>

Thu, 28 Jun 2001 14:53:06 -0400

53 lines

Re: Circuit Board Disposal

Tenison Stone <[log in to unmask]>

Thu, 28 Jun 2001 14:05:42 -0500

30 lines

Re: Circuit Board Disposal

Stephen R. Gregory <[log in to unmask]>

Thu, 28 Jun 2001 15:55:24 EDT

91 lines

New Thread

clean air

clean air

Lon Weffers <[log in to unmask]>

Fri, 15 Jun 2001 12:35:19 +0200

33 lines

Re: clean air

Brian Ellis <[log in to unmask]>

Fri, 15 Jun 2001 15:57:05 +0300

62 lines

Re: clean air

<Peter George Duncan> <[log in to unmask]>

Mon, 18 Jun 2001 08:19:47 +0800

93 lines

Re: clean air

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 18 Jun 2001 08:35:23 -0400

66 lines

New Thread

Cleaning of assemblies after hand soldering

Cleaning of assemblies after hand soldering

Lou Hart <[log in to unmask]>

Wed, 6 Jun 2001 17:09:04 -0400

32 lines

Re: Cleaning of assemblies after hand soldering

Crepeau, Phil <[log in to unmask]>

Thu, 7 Jun 2001 07:21:21 -0700

58 lines

Re: Cleaning of assemblies after hand soldering

Brian Ellis <[log in to unmask]>

Thu, 7 Jun 2001 18:26:31 +0300

74 lines

Re: Cleaning of assemblies after hand soldering

Brian Ellis <[log in to unmask]>

Thu, 7 Jun 2001 18:27:17 +0300

79 lines

New Thread

Coating and Coates Mask

Coating and Coates Mask

Douglas Pauls <[log in to unmask]>

Tue, 5 Jun 2001 16:39:49 -0500

29 lines

New Thread

Coating vs. UL-approval

Coating vs. UL-approval

Sasha Miladinovic <[log in to unmask]>

Tue, 19 Jun 2001 02:58:25 -0500

57 lines

Re: Coating vs. UL-approval

Alan Brewin <[log in to unmask]>

Tue, 19 Jun 2001 10:20:28 +0100

388 lines

New Thread

Component F/A continues with more ugly pics

Component F/A continues with more ugly pics

Earl Moon <[log in to unmask]>

Tue, 12 Jun 2001 15:25:53 -0500

40 lines

Re: Component F/A continues with more ugly pics

Stephen R. Gregory <[log in to unmask]>

Tue, 12 Jun 2001 17:13:01 EDT

103 lines

Re: Component F/A continues with more ugly pics

Creswick, Steven <[log in to unmask]>

Wed, 13 Jun 2001 07:42:13 -0400

319 lines

New Thread

Component Underfill Material Search

Component Underfill Material Search

David Hillman <[log in to unmask]>

Tue, 12 Jun 2001 16:35:25 -0500

32 lines

New Thread

Conductive Paint......

Re: Conductive Paint......

Mike Fenner <[log in to unmask]>

Mon, 4 Jun 2001 08:51:00 +0100

91 lines

New Thread

Conformal coating

Conformal coating

West, Jim <[log in to unmask]>

Wed, 27 Jun 2001 12:00:31 -0400

27 lines

Re: Conformal coating

Crepeau, Phil <[log in to unmask]>

Wed, 27 Jun 2001 10:20:51 -0700

51 lines

Re: Conformal coating

Carroll, George <[log in to unmask]>

Wed, 27 Jun 2001 13:30:42 -0400

68 lines

Re: Conformal coating

David Suraski <[log in to unmask]>

Wed, 27 Jun 2001 13:40:24 -0400

81 lines

Re: Conformal coating

Mario Hernandez <[log in to unmask]>

Wed, 27 Jun 2001 12:56:14 -0500

86 lines

Re: Conformal coating

[log in to unmask]

Wed, 27 Jun 2001 14:38:13 -0500

45 lines

Re: Conformal coating

David Douthit <[log in to unmask]>

Wed, 27 Jun 2001 13:18:41 -0700

51 lines

Re: Conformal coating

Brian Ellis <[log in to unmask]>

Thu, 28 Jun 2001 12:59:16 +0300

67 lines

New Thread

Conformal coating or not ?

Conformal coating or not ?

Jorge Santana <[log in to unmask]>

Tue, 12 Jun 2001 09:01:23 -0500

29 lines

Re: Conformal coating or not ?

Brian Ellis <[log in to unmask]>

Tue, 12 Jun 2001 17:48:53 +0300

56 lines

Re: Conformal coating or not ?

Jon Moore <[log in to unmask]>

Tue, 12 Jun 2001 18:10:13 EDT

25 lines

New Thread

Conformal coating: white haze

Conformal coating: white haze

Bissonnette, Jean-Francois <[log in to unmask]>

Mon, 18 Jun 2001 11:35:50 -0400

136 lines

Re: Conformal coating: white haze

Marsico, James <[log in to unmask]>

Mon, 18 Jun 2001 13:54:58 -0400

74 lines

Re: Conformal coating: white haze

Crepeau, Phil <[log in to unmask]>

Mon, 18 Jun 2001 11:46:09 -0700

194 lines

Re: Conformal coating: white haze

DUTTON Phil <[log in to unmask]>

Tue, 19 Jun 2001 10:20:33 +1000

218 lines

Re: Conformal coating: white haze

Lim Yak Peng <[log in to unmask]>

Tue, 19 Jun 2001 08:57:42 +0800

109 lines

Re: Conformal coating: white haze

Alan Brewin <[log in to unmask]>

Tue, 19 Jun 2001 09:28:27 +0100

86 lines

Re: Conformal coating: white haze

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 19 Jun 2001 12:53:38 -0400

130 lines

New Thread

Cooling Rates

Re: Cooling Rates

Jonathan A Noquil <[log in to unmask]>

Thu, 28 Jun 2001 19:40:48 +0800

34 lines

New Thread

Copper Plating Aluminum

Copper Plating Aluminum

Phillip E. Hinton <[log in to unmask]>

Fri, 29 Jun 2001 00:45:22 EDT

32 lines

Re: Copper Plating Aluminum

<Rudy Sedlak> <[log in to unmask]>

Fri, 29 Jun 2001 01:43:24 EDT

38 lines

Re: Copper Plating Aluminum

Jonathan A Noquil <[log in to unmask]>

Fri, 29 Jun 2001 14:26:53 +0800

25 lines

Re: Copper Plating Aluminum

Albin, David <[log in to unmask]>

Fri, 29 Jun 2001 08:45:12 +0100

65 lines

Re: Copper Plating Aluminum

Eric Christison <[log in to unmask]>

Fri, 29 Jun 2001 10:33:10 -0500

65 lines

Re: Copper Plating Aluminum

Phillip E. Hinton <[log in to unmask]>

Fri, 29 Jun 2001 11:41:25 EDT

31 lines

New Thread

Cotton Gloves/Finger Cots

Re: Cotton Gloves/Finger Cots

Douglas Pauls <[log in to unmask]>

Fri, 1 Jun 2001 07:58:43 -0500

32 lines

New Thread

cracking GaAs dice

Re: cracking GaAs dice

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 19 Jun 2001 12:57:13 +0200

28 lines

New Thread

Delamination Blisters...

Delamination Blisters...

Stephen R. Gregory <[log in to unmask]>

Mon, 18 Jun 2001 14:50:18 EDT

106 lines

Re: Delamination Blisters...

Kathy Kuhlow <[log in to unmask]>

Mon, 18 Jun 2001 14:01:32 -0500

48 lines

Re: Delamination Blisters...

[log in to unmask]

Mon, 18 Jun 2001 15:20:58 EDT

49 lines

Re: Delamination Blisters...

Stephen R. Gregory <[log in to unmask]>

Mon, 18 Jun 2001 16:45:48 EDT

71 lines

Re: Delamination Blisters...

Dwight Mattix <[log in to unmask]>

Mon, 18 Jun 2001 17:19:13 -0700

123 lines

Re: Delamination Blisters...

Chuck Brummer <[log in to unmask]>

Tue, 19 Jun 2001 08:33:33 -0700

156 lines

New Thread

DFM & DFT guide

DFM & DFT guide

Avigdor Jakubinsky <[log in to unmask]>

Wed, 27 Jun 2001 10:09:52 +0200

37 lines

New Thread

Double Postings

Double Postings

Graham Naisbitt <[log in to unmask]>

Fri, 29 Jun 2001 17:16:48 +0100

111 lines

Re: Double Postings

Stephen R. Gregory <[log in to unmask]>

Fri, 29 Jun 2001 12:26:50 EDT

61 lines

New Thread

Dross reclaim

Dross reclaim

Nancy Trumbull <[log in to unmask]>

Thu, 28 Jun 2001 13:05:20 -0400

43 lines

Re: Dross reclaim

Jon Moore <[log in to unmask]>

Thu, 28 Jun 2001 14:42:14 EDT

26 lines

New Thread

Dual Side Reflow with A Pallet

Dual Side Reflow with A Pallet

Lefebvre, Scott <[log in to unmask]>

Tue, 12 Jun 2001 17:26:55 -0500

36 lines

Re: Dual Side Reflow with A Pallet

Jiang Ping <[log in to unmask]>

Wed, 13 Jun 2001 13:57:34 +0800

60 lines

Re: Dual Side Reflow with A Pallet

gleason <[log in to unmask]>

Wed, 13 Jun 2001 09:22:53 -0700

101 lines

New Thread

Dumb question

Re: Dumb question

Dorothy M. Lush <[log in to unmask]>

Thu, 28 Jun 2001 18:00:32 -0500

82 lines

Re: Dumb question

Safavi-Bayat,Shahed <[log in to unmask]>

Fri, 29 Jun 2001 08:05:31 -0400

244 lines

Re: Dumb question

Steve Abrahamson <[log in to unmask]>

Fri, 29 Jun 2001 09:51:04 -0600

135 lines

New Thread

Earls latest picture...

Earls latest picture...

Stephen R. Gregory <[log in to unmask]>

Thu, 7 Jun 2001 12:34:01 EDT

48 lines

New Thread

Electroplating coating for Metallographic Preparation

Electroplating coating for Metallographic Preparation

Becerra Alejandro <[log in to unmask]>

Tue, 5 Jun 2001 18:37:41 -0500

94 lines

Re: Electroplating coating for Metallographic Preparation

[log in to unmask]

Wed, 6 Jun 2001 09:06:49 EDT

55 lines

Re: Electroplating coating for Metallographic Preparation

Crepeau, Phil <[log in to unmask]>

Wed, 6 Jun 2001 07:08:29 -0700

93 lines

Re: Electroplating coating for Metallographic Preparation

Barmuta, Mike <[log in to unmask]>

Wed, 6 Jun 2001 07:25:10 -0700

74 lines

Re: Electroplating coating for Metallographic Preparation

David Hillman <[log in to unmask]>

Wed, 6 Jun 2001 10:42:15 -0500

80 lines

Re: Electroplating coating for Metallographic Preparation

Brian McCrory <[log in to unmask]>

Wed, 6 Jun 2001 08:57:41 -0700

61 lines

New Thread

Equivalent BS specs

Re: Equivalent BS specs

Lee Whiteman <[log in to unmask]>

Sat, 2 Jun 2001 02:44:41 -0400

115 lines

New Thread

ERP Recommendations

ERP Recommendations

C. Jeffrey Char <[log in to unmask]>

Wed, 13 Jun 2001 07:32:01 +0900

26 lines

Re: ERP Recommendations

Roland Jaquet <[log in to unmask]>

Wed, 13 Jun 2001 01:12:03 +0200

173 lines

Re: ERP Recommendations

michael <[log in to unmask]>

Wed, 13 Jun 2001 10:35:49 +0800

56 lines

New Thread

ESD & Unsealed Concrete

ESD & Unsealed Concrete

The Job Shop <[log in to unmask]>

Mon, 11 Jun 2001 11:40:30 -0700

30 lines

Re: ESD & Unsealed Concrete

Phil Nutting <[log in to unmask]>

Mon, 11 Jun 2001 15:04:22 -0400

62 lines

Re: ESD & Unsealed Concrete

Rick Thompson <[log in to unmask]>

Mon, 11 Jun 2001 14:37:09 -0700

73 lines

Re: ESD & Unsealed Concrete

Brian Ellis <[log in to unmask]>

Tue, 12 Jun 2001 09:22:32 +0300

51 lines

Re: ESD & Unsealed Concrete

Neda Thrash <[log in to unmask]>

Tue, 12 Jun 2001 08:34:59 -0500

77 lines

Re: ESD & Unsealed Concrete

Brian Ellis <[log in to unmask]>

Tue, 12 Jun 2001 17:40:22 +0300

89 lines

New Thread

ESD QUESTION

ESD QUESTION

Marsico, James <[log in to unmask]>

Thu, 21 Jun 2001 10:13:10 -0400

29 lines

Re: ESD QUESTION

Lee Whiteman <[log in to unmask]>

Thu, 21 Jun 2001 23:01:41 -0400

89 lines

New Thread

Etching AuSn

Etching AuSn

Kiet Dang <[log in to unmask]>

Fri, 1 Jun 2001 11:15:48 -0700

23 lines

New Thread

Exposed copper

Exposed copper

Mary Jane Chism <[log in to unmask]>

Fri, 1 Jun 2001 11:31:33 -0500

89 lines

Re: Exposed copper

Ted Tontis <[log in to unmask]>

Fri, 1 Jun 2001 12:43:26 -0500

130 lines

Re: Exposed copper

Safavi-Bayat,Shahed <[log in to unmask]>

Fri, 1 Jun 2001 13:49:28 -0400

153 lines

Re: Exposed copper

Kathy Kuhlow <[log in to unmask]>

Fri, 1 Jun 2001 14:02:33 -0500

52 lines

Re: Exposed copper

<Peter George Duncan> <[log in to unmask]>

Mon, 4 Jun 2001 08:54:05 +0800

95 lines

New Thread

Feedback wanted on Registred Instructor IPC-7711/7721 training

Feedback wanted on Registred Instructor IPC-7711/7721 training

Julien Bouchard <[log in to unmask]>

Mon, 11 Jun 2001 11:42:53 -0400

44 lines

New Thread

Feedback wanted on Registred Instructor IPC-7711/7721training

Re: Feedback wanted on Registred Instructor IPC-7711/7721training

Tom Parkinson - Quality System Manager <[log in to unmask]>

Mon, 11 Jun 2001 14:07:52 -0400

88 lines

Re: Feedback wanted on Registred Instructor IPC-7711/7721training

Neda Thrash <[log in to unmask]>

Mon, 11 Jun 2001 13:10:58 -0500

78 lines

New Thread

flex buried via fill?

flex buried via fill?

Thomas R. Fisher <[log in to unmask]>

Wed, 6 Jun 2001 19:48:37 EDT

40 lines

New Thread

Flexible Circuit Board Material Resoure

Flexible Circuit Board Material Resoure

Benjamin Zhu <[log in to unmask]>

Wed, 20 Jun 2001 10:08:11 +0800

65 lines

New Thread

flowing solder pot

flowing solder pot

Marsico, James <[log in to unmask]>

Wed, 20 Jun 2001 08:47:55 -0400

27 lines

Re: flowing solder pot

Anderson, Greg (IndSys, GEFanuc, NA) <[log in to unmask]>

Wed, 20 Jun 2001 09:14:34 -0400

67 lines

Re: flowing solder pot

Marsico, James <[log in to unmask]>

Wed, 20 Jun 2001 09:43:36 -0400

116 lines

New Thread

Freshness of Components

Freshness of Components

Shapira Motti <[log in to unmask]>

Mon, 25 Jun 2001 12:03:33 +0300

47 lines

New Thread

FW: dispensing glue

FW: dispensing glue

Lon Weffers <[log in to unmask]>

Thu, 21 Jun 2001 14:49:34 +0200

34 lines

Re: FW: dispensing glue

Campbell, William (wcampbel) <[log in to unmask]>

Thu, 21 Jun 2001 09:21:12 -0400

61 lines

Re: FW: dispensing glue

Tom B. <[log in to unmask]>

Thu, 21 Jun 2001 09:31:34 -0400

82 lines

Re: FW: dispensing glue

Steve Abrahamson <[log in to unmask]>

Thu, 21 Jun 2001 09:39:01 -0600

74 lines

New Thread

FW: [TN] Exposed copper

FW: [TN] Exposed copper

Guy Ramsey <[log in to unmask]>

Fri, 1 Jun 2001 17:09:25 -0400

74 lines

New Thread

Glue Nozzle Cleaning

Glue Nozzle Cleaning

Rob Day <[log in to unmask]>

Mon, 18 Jun 2001 07:08:36 -0500

31 lines

Re: Glue Nozzle Cleaning

Stephen R. Gregory <[log in to unmask]>

Mon, 18 Jun 2001 09:49:37 EDT

77 lines

Re: Glue Nozzle Cleaning

Tom B. <[log in to unmask]>

Mon, 18 Jun 2001 10:39:45 -0400

76 lines

Re: Glue Nozzle Cleaning

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 18 Jun 2001 10:53:15 -0400

55 lines

Re: Glue Nozzle Cleaning

Eric Dawson <[log in to unmask]>

Mon, 18 Jun 2001 16:33:27 +0100

65 lines

Re: Glue Nozzle Cleaning

Steve Abrahamson <[log in to unmask]>

Mon, 18 Jun 2001 10:55:19 -0600

74 lines

Re: Glue Nozzle Cleaning

Jorge Santana <[log in to unmask]>

Mon, 18 Jun 2001 11:03:25 -0500

63 lines

Re: Glue Nozzle Cleaning

Jon Moore <[log in to unmask]>

Mon, 18 Jun 2001 15:03:22 EDT

24 lines

New Thread

Hand Soldering 0201 and 0402 components

Hand Soldering 0201 and 0402 components

Paul Gill <[log in to unmask]>

Tue, 5 Jun 2001 14:06:20 -0700

44 lines

Re: Hand Soldering 0201 and 0402 components

Sasha Miladinovic <[log in to unmask]>

Wed, 6 Jun 2001 01:57:26 -0500

28 lines

Re: Hand Soldering 0201 and 0402 components

Jon Moore <[log in to unmask]>

Wed, 6 Jun 2001 12:20:43 EDT

40 lines

Re: Hand Soldering 0201 and 0402 components

Jason Gregory <[log in to unmask]>

Wed, 6 Jun 2001 12:03:04 -0500

83 lines

New Thread

Hi-Temp Masking Tape

Hi-Temp Masking Tape

Kane, Joseph <[log in to unmask]>

Fri, 22 Jun 2001 08:23:31 -0400

27 lines

Re: Hi-Temp Masking Tape

Phil Nutting <[log in to unmask]>

Fri, 22 Jun 2001 08:52:10 -0400

75 lines

Re: Hi-Temp Masking Tape

[log in to unmask]

Fri, 22 Jun 2001 07:51:10 -0500

27 lines

New Thread

High speed paste dispensing

High speed paste dispensing

Paul Klasek <[log in to unmask]>

Wed, 13 Jun 2001 17:11:32 +1000

85 lines

Re: High speed paste dispensing

Kasprzak, Bill (sys) USX <[log in to unmask]>

Wed, 13 Jun 2001 13:34:28 -0400

159 lines

Re: High speed paste dispensing

Chris Gifford <[log in to unmask]>

Wed, 13 Jun 2001 14:08:24 -0400

189 lines

Re: High speed paste dispensing

Paul Klasek <[log in to unmask]>

Thu, 14 Jun 2001 08:30:22 +1000

229 lines

Re: High speed paste dispensing

Chris Gifford <[log in to unmask]>

Thu, 14 Jun 2001 07:57:10 -0400

259 lines

Re: High speed paste dispensing

Terveen, James @ NARDAEAST <[log in to unmask]>

Thu, 14 Jun 2001 08:12:08 -0400

187 lines

New Thread

High speed paste dispensing (with Indium)

Re: High speed paste dispensing (with Indium)

Paul Klasek <[log in to unmask]>

Thu, 14 Jun 2001 10:58:30 +1000

213 lines

New Thread

Hole size

Hole size

Jerry Mosur <[log in to unmask]>

Fri, 1 Jun 2001 09:09:56 -0400

35 lines

Re: Hole size

Werner Engelmaier <[log in to unmask]>

Fri, 1 Jun 2001 10:19:25 EDT

44 lines

New Thread

Hot Bar Soldering

Hot Bar Soldering

Barry Gallegos <[log in to unmask]>

Thu, 21 Jun 2001 11:29:49 -0600

82 lines

Re: Hot Bar Soldering

Lee Whiteman <[log in to unmask]>

Fri, 22 Jun 2001 02:59:38 -0400

156 lines

Re: Hot Bar Soldering

Crepeau, Phil <[log in to unmask]>

Thu, 21 Jun 2001 11:56:46 -0700

118 lines

Re: Hot Bar Soldering

Martin Christie <[log in to unmask]>

Fri, 22 Jun 2001 10:10:32 +0100

154 lines

New Thread

Hot Plates

Hot Plates

Rick Howieson <[log in to unmask]>

Fri, 1 Jun 2001 08:22:09 -0600

22 lines

Re: Hot Plates

Lee Whiteman <[log in to unmask]>

Fri, 1 Jun 2001 23:04:11 -0400

66 lines

Re: Hot Plates

Timothy Reeves <[log in to unmask]>

Fri, 1 Jun 2001 14:24:06 -0700

33 lines

New Thread

How do you reflow?

How do you reflow?

Craig Hillman <[log in to unmask]>

Wed, 27 Jun 2001 10:28:10 -0400

61 lines

Re: How do you reflow?

Marsico, James <[log in to unmask]>

Wed, 27 Jun 2001 10:54:54 -0400

112 lines

Re: How do you reflow?

Jason Gregory <[log in to unmask]>

Wed, 27 Jun 2001 10:51:45 -0500

105 lines

Re: How do you reflow?

Peter Swanson <[log in to unmask]>

Wed, 27 Jun 2001 16:45:15 +0100

115 lines

Re: How do you reflow?

Brian Ellis <[log in to unmask]>

Wed, 27 Jun 2001 19:40:32 +0300

85 lines

Re: How do you reflow?

Stephen R. Gregory <[log in to unmask]>

Wed, 27 Jun 2001 13:59:30 EDT

224 lines

Re: How do you reflow?

Brian Ellis <[log in to unmask]>

Thu, 28 Jun 2001 14:17:48 +0300

202 lines

New Thread

How do you reflow? (

Re: How do you reflow? (

Roger M. Stoops <[log in to unmask]>

Wed, 27 Jun 2001 12:40:18 -0400

151 lines

New Thread

How to design a PCB with buried resistors

How to design a PCB with buried resistors

Bolis Bortolo BB PCBDesign <[log in to unmask]>

Wed, 20 Jun 2001 00:04:32 +0200

69 lines

New Thread

ICT and Burn-In Services

ICT and Burn-In Services

Tom B. <[log in to unmask]>

Mon, 11 Jun 2001 11:42:08 -0400

70 lines

New Thread

ICT and Burn-In Test Services

ICT and Burn-In Test Services

Tom B. <[log in to unmask]>

Tue, 12 Jun 2001 12:10:29 -0400

71 lines

New Thread

ICT calibration

ICT calibration

Lou Hart <[log in to unmask]>

Fri, 22 Jun 2001 16:15:16 -0400

23 lines

Re: ICT calibration

Tom Parkinson - Quality System Manager <[log in to unmask]>

Fri, 22 Jun 2001 16:41:32 -0400

46 lines

Re: ICT calibration

Ed Cosper <[log in to unmask]>

Fri, 22 Jun 2001 16:59:54 -0400

70 lines

Re: ICT calibration

Mark Charlton <[log in to unmask]>

Fri, 22 Jun 2001 18:09:28 -0400

61 lines

New Thread

ICT Specifications.

ICT Specifications.

Stephen Brown <[log in to unmask]>

Fri, 15 Jun 2001 14:58:45 +0100

25 lines

Re: ICT Specifications.

Kathy Kuhlow <[log in to unmask]>

Fri, 15 Jun 2001 10:42:57 -0500

50 lines

Re: ICT Specifications.

Darrel Therriault <[log in to unmask]>

Mon, 18 Jun 2001 08:20:02 -0700

62 lines

New Thread

Immersion Silver

Immersion Silver

Bruce Bryla <[log in to unmask]>

Fri, 29 Jun 2001 05:41:09 -0500

27 lines

Re: Immersion Silver

Wenger, George M (George) <[log in to unmask]>

Fri, 29 Jun 2001 07:42:17 -0400

71 lines

Re: Immersion Silver

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Fri, 29 Jun 2001 09:20:45 -0400

73 lines

Re: Immersion Silver

Darrel Therriault <[log in to unmask]>

Fri, 29 Jun 2001 09:02:24 -0700

53 lines

New Thread

Immersion silver boards tarnish

Re: Immersion silver boards tarnish

David Hillman <[log in to unmask]>

Wed, 6 Jun 2001 11:34:02 -0500

76 lines

Re: Immersion silver boards tarnish

Ken Mc Gowan <[log in to unmask]>

Wed, 6 Jun 2001 19:54:35 -0100

116 lines

New Thread

In-line Cleaner

In-line Cleaner

Keith Calhoun <[log in to unmask]>

Wed, 27 Jun 2001 13:30:39 -0400

33 lines

Re: In-line Cleaner

Marsico, James <[log in to unmask]>

Wed, 27 Jun 2001 13:55:15 -0400

75 lines

Re: In-line Cleaner

Jason Gregory <[log in to unmask]>

Wed, 27 Jun 2001 13:02:59 -0500

64 lines

Re: In-line Cleaner

Crepeau, Phil <[log in to unmask]>

Wed, 27 Jun 2001 11:16:41 -0700

55 lines

Re: In-line Cleaner

Hans Hinners <[log in to unmask]>

Wed, 27 Jun 2001 11:19:27 -0700

74 lines

Re: In-line Cleaner

Crepeau, Phil <[log in to unmask]>

Wed, 27 Jun 2001 15:23:33 -0700

68 lines

Re: In-line Cleaner

Jon Moore <[log in to unmask]>

Wed, 27 Jun 2001 18:27:57 EDT

24 lines

New Thread

Industry Indicators

Industry Indicators

Hann Pang <[log in to unmask]>

Mon, 11 Jun 2001 13:32:57 -0500

36 lines

Re: Industry Indicators

Goldman, Patricia J. <[log in to unmask]>

Mon, 11 Jun 2001 14:55:58 -0400

64 lines

Re: Industry Indicators

Stephen R. Gregory <[log in to unmask]>

Mon, 11 Jun 2001 15:10:05 EDT

107 lines

New Thread

IPC-D-275

IPC-D-275

Steve Kelly <[log in to unmask]>

Thu, 14 Jun 2001 12:55:41 -0400

27 lines

Re: IPC-D-275

Jack Crawford <[log in to unmask]>

Mon, 18 Jun 2001 19:02:46 -0500

44 lines

New Thread

ISO 9000-2000 "Handbook"

ISO 9000-2000 "Handbook"

Phil Nutting <[log in to unmask]>

Mon, 18 Jun 2001 10:32:38 -0400

28 lines

Re: ISO 9000-2000 "Handbook"

Kathy Kuhlow <[log in to unmask]>

Mon, 18 Jun 2001 11:40:59 -0500

43 lines

Re: ISO 9000-2000 "Handbook"

David Fish <[log in to unmask]>

Wed, 20 Jun 2001 21:31:33 -0700

60 lines

New Thread

Its too darn hot to work

Its too darn hot to work

Graham Naisbitt <[log in to unmask]>

Mon, 25 Jun 2001 23:26:54 +0100

138 lines

Re: Its too darn hot to work

Creswick, Steven <[log in to unmask]>

Mon, 25 Jun 2001 18:49:22 -0400

183 lines

Re: Its too darn hot to work

Smith Russell PO US <[log in to unmask]>

Tue, 26 Jun 2001 01:42:28 +0200

129 lines

Re: Its too darn hot to work

Ryan Grant <[log in to unmask]>

Mon, 25 Jun 2001 18:00:45 -0600

95 lines

Re: Its too darn hot to work

Stephen R. Gregory <[log in to unmask]>

Mon, 25 Jun 2001 20:23:20 EDT

161 lines

Re: Its too darn hot to work

<Peter George Duncan> <[log in to unmask]>

Tue, 26 Jun 2001 12:04:44 +0800

89 lines

Re: Its too darn hot to work

Brian Ellis <[log in to unmask]>

Tue, 26 Jun 2001 11:09:30 +0300

115 lines

Re: Its too darn hot to work

Ted Tontis <[log in to unmask]>

Tue, 26 Jun 2001 08:17:45 -0500

292 lines

Re: Its too darn hot to work

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 26 Jun 2001 09:43:02 -0400

80 lines

New Thread

Its too darn hot to work, a webpage...

Re: Its too darn hot to work, a webpage...

Stephen R. Gregory <[log in to unmask]>

Mon, 25 Jun 2001 22:47:36 EDT

73 lines

New Thread

J-STD-002 and -003 solderability testing...

J-STD-002 and -003 solderability testing...

Stephen R. Gregory <[log in to unmask]>

Fri, 29 Jun 2001 11:20:08 EDT

52 lines

Re: J-STD-002 and -003 solderability testing...

Marsico, James <[log in to unmask]>

Fri, 29 Jun 2001 13:46:07 -0400

60 lines

Re: J-STD-002 and -003 solderability testing...

David Fish <[log in to unmask]>

Sat, 30 Jun 2001 11:41:13 -0700

190 lines

New Thread

JEDEK Compliancy?

JEDEK Compliancy?

John Fahey <[log in to unmask]>

Wed, 20 Jun 2001 10:12:46 -0500

24 lines

Re: JEDEK Compliancy?

Hann Pang <[log in to unmask]>

Wed, 20 Jun 2001 11:08:22 -0500

63 lines

New Thread

JEDEK trays

JEDEK trays

John Fahey <[log in to unmask]>

Wed, 20 Jun 2001 08:12:26 -0700

70 lines

New Thread

jump score, anyone?

jump score, anyone?

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 12 Jun 2001 12:56:04 -0400

43 lines

Re: jump score, anyone?

mark simmons <[log in to unmask]>

Tue, 12 Jun 2001 10:28:18 -0700

70 lines

New Thread

Laser Drill

Laser Drill

[log in to unmask]

Mon, 4 Jun 2001 13:53:33 EDT

32 lines

Re: Laser Drill

Kathy Bergman <[log in to unmask]>

Mon, 4 Jun 2001 11:21:57 -0700

49 lines

Re: Laser Drill

Marsico, James <[log in to unmask]>

Mon, 4 Jun 2001 14:15:39 -0400

69 lines

New Thread

Laser Drilling

Laser Drilling

[log in to unmask]

Mon, 4 Jun 2001 13:47:52 EDT

19 lines

New Thread

Laser Trimmer for Ceramic Substrate Traces/Wires

Laser Trimmer for Ceramic Substrate Traces/Wires

< Jay Bitanga > <[log in to unmask]>

Fri, 22 Jun 2001 06:19:13 +0000

38 lines

New Thread

Latest Info. using White Tin

Latest Info. using White Tin

Lefebvre, Scott <[log in to unmask]>

Fri, 8 Jun 2001 14:44:05 -0500

36 lines

New Thread

Looking for a "special" solder paste dispenser

Looking for a "special" solder paste dispenser

Craig Hillman <[log in to unmask]>

Mon, 11 Jun 2001 08:05:50 -0400

91 lines

Re: Looking for a "special" solder paste dispenser

gleason <[log in to unmask]>

Mon, 11 Jun 2001 10:35:20 -0700

117 lines

Re: Looking for a "special" solder paste dispenser

Kathy Kuhlow <[log in to unmask]>

Mon, 11 Jun 2001 10:30:16 -0500

50 lines

Re: Looking for a "special" solder paste dispenser

Creswick, Steven <[log in to unmask]>

Mon, 11 Jun 2001 12:26:22 -0400

144 lines

Re: Looking for a "special" solder paste dispenser

Lee Whiteman <[log in to unmask]>

Tue, 12 Jun 2001 02:39:19 -0400

187 lines

Re: Looking for a "special" solder paste dispenser

Ken Mc Gowan <[log in to unmask]>

Mon, 11 Jun 2001 16:59:10 -0100

171 lines

Re: Looking for a "special" solder paste dispenser

<Peter George Duncan> <[log in to unmask]>

Tue, 12 Jun 2001 08:04:07 +0800

67 lines

Re: Looking for a "special" solder paste dispenser

Mike Fenner <[log in to unmask]>

Tue, 12 Jun 2001 08:46:42 +0100

104 lines

Re: Looking for a "special" solder paste dispenser

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 12 Jun 2001 07:36:21 -0400

91 lines

Re: Looking for a "special" solder paste dispenser

Mike Fenner <[log in to unmask]>

Tue, 12 Jun 2001 13:19:14 +0100

135 lines

Re: Looking for a "special" solder paste dispenser

Stephen R. Gregory <[log in to unmask]>

Tue, 12 Jun 2001 08:45:19 EDT

373 lines

Re: Looking for a "special" solder paste dispenser

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 12 Jun 2001 14:58:11 +0200

200 lines

Re: Looking for a "special" solder paste dispenser

Jon Moore <[log in to unmask]>

Tue, 12 Jun 2001 17:52:32 EDT

23 lines

New Thread

Looking for current carrying capacity of vias.

Looking for current carrying capacity of vias.

Barbara Burcham <[log in to unmask]>

Thu, 21 Jun 2001 10:49:53 -0500

22 lines

RE: Looking for current carrying capacity of vias.

Matthew Lamkin <[log in to unmask]>

Fri, 22 Jun 2001 08:28:34 +0100

32 lines

Re: Looking for current carrying capacity of vias.

Brian Ellis <[log in to unmask]>

Fri, 22 Jun 2001 16:19:05 +0300

57 lines

New Thread

Looking for Larry Fisher

Looking for Larry Fisher

Jana L. Carraway <[log in to unmask]>

Wed, 20 Jun 2001 10:34:03 -0700

28 lines

New Thread

Looking for Solderability Test Service

Looking for Solderability Test Service

Bev Christian <[log in to unmask]>

Wed, 13 Jun 2001 10:45:40 -0400

67 lines

Re: Looking for Solderability Test Service

Marsico, James <[log in to unmask]>

Wed, 13 Jun 2001 12:40:14 -0400

45 lines

Re: Looking for Solderability Test Service

Stephen R. Gregory <[log in to unmask]>

Wed, 13 Jun 2001 15:32:44 EDT

93 lines

New Thread

Low Temp Solder with Bismuth??

Low Temp Solder with Bismuth??

Rick Thompson <[log in to unmask]>

Fri, 8 Jun 2001 11:23:36 -0700

41 lines

Re: Low Temp Solder with Bismuth??

Stephen R. Gregory <[log in to unmask]>

Fri, 8 Jun 2001 15:52:59 EDT

103 lines

Re: Low Temp Solder with Bismuth??

David Hillman <[log in to unmask]>

Fri, 8 Jun 2001 15:25:46 -0500

87 lines

Re: Low Temp Solder with Bismuth??

Mike Fenner <[log in to unmask]>

Mon, 11 Jun 2001 13:15:50 +0100

189 lines

New Thread

Make your hotel reservations now for APEX 2002

Make your hotel reservations now for APEX 2002

Jack Crawford <[log in to unmask]>

Tue, 5 Jun 2001 16:36:28 -0500

127 lines

New Thread

Manual inspection related stuff

Re: Manual inspection related stuff

Mark Orlowski <[log in to unmask]>

Mon, 4 Jun 2001 15:35:42 -0500

28 lines

Re: Manual inspection related stuff

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Jun 2001 17:15:38 EDT

113 lines

Re: Manual inspection related stuff

Werner Engelmaier <[log in to unmask]>

Mon, 4 Jun 2001 17:22:31 EDT

36 lines

Re: Manual inspection related stuff

Hans Hinners <[log in to unmask]>

Mon, 4 Jun 2001 15:58:49 -0700

133 lines

New Thread

Marking

Marking

Rick Howieson <[log in to unmask]>

Mon, 25 Jun 2001 05:48:04 -0600

24 lines

Re: Marking

Guy Ramsey <[log in to unmask]>

Mon, 25 Jun 2001 09:13:50 -0400

71 lines

Re: Marking

Graham Collins <[log in to unmask]>

Mon, 25 Jun 2001 09:32:20 -0400

114 lines

Re: Marking

Kathy Kuhlow <[log in to unmask]>

Mon, 25 Jun 2001 08:40:28 -0500

50 lines

Re: Marking

Richard Hamilton <[log in to unmask]>

Mon, 25 Jun 2001 08:02:57 -0700

54 lines

Re: Marking

<Peter George Duncan> <[log in to unmask]>

Tue, 26 Jun 2001 10:53:13 +0800

75 lines

New Thread

Measling...

Measling...

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Jun 2001 14:58:03 EDT

68 lines

Re: Measling...

Noble, Ed <[log in to unmask]>

Mon, 4 Jun 2001 16:41:24 -0400

54 lines

Re: Measling...

<Peter George Duncan> <[log in to unmask]>

Tue, 5 Jun 2001 10:23:07 +0800

76 lines

Re: Measling...

Joyce Koo <[log in to unmask]>

Tue, 5 Jun 2001 08:34:53 -0400

113 lines

Re: Measling...

PERALTA, Kevin (BREA) <[log in to unmask]>

Tue, 5 Jun 2001 09:40:30 -0400

409 lines

Re: Measling...

Lee Whiteman <[log in to unmask]>

Tue, 5 Jun 2001 21:44:16 -0400

146 lines

Re: Measling...

Joyce Koo <[log in to unmask]>

Tue, 5 Jun 2001 10:12:58 -0400

184 lines

Re: Measling...

Sauer, Steven T. <[log in to unmask]>

Tue, 5 Jun 2001 12:45:24 -0400

38 lines

Re: Measling...

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 5 Jun 2001 13:16:12 -0400

85 lines

Re: Measling...

Ted Tontis <[log in to unmask]>

Tue, 5 Jun 2001 12:34:02 -0500

119 lines

Re: Measling...

Tony Steinke <[log in to unmask]>

Tue, 5 Jun 2001 15:30:42 -0400

151 lines

Re: Measling...

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Jun 2001 15:29:18 EDT

101 lines

Re: Measling...

Charles Lawson <[log in to unmask]>

Tue, 5 Jun 2001 16:41:04 -0400

48 lines

Re: Measling...

<Peter George Duncan> <[log in to unmask]>

Wed, 6 Jun 2001 12:32:35 +0800

155 lines

New Thread

MIL-STD-454

MIL-STD-454

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 19 Jun 2001 12:56:31 -0400

83 lines

Re: MIL-STD-454

Hans Shin <[log in to unmask]>

Tue, 19 Jun 2001 10:13:24 -0700

51 lines

Re: MIL-STD-454

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 19 Jun 2001 13:53:54 -0400

88 lines

Re: MIL-STD-454

Dieselberg, Ron <[log in to unmask]>

Tue, 19 Jun 2001 14:50:21 -0400

63 lines

New Thread

Minimum requirements for final rinse in assembled boards

Minimum requirements for final rinse in assembled boards

Alain Savard <[log in to unmask]>

Tue, 5 Jun 2001 11:44:09 -0400

34 lines

Re: Minimum requirements for final rinse in assembled boards

Phil Nutting <[log in to unmask]>

Tue, 5 Jun 2001 13:13:13 -0400

59 lines

Re: Minimum requirements for final rinse in assembled boards

Douglas Pauls <[log in to unmask]>

Tue, 5 Jun 2001 12:41:29 -0500

32 lines

Re: Minimum requirements for final rinse in assembled boards

Brian Ellis <[log in to unmask]>

Tue, 5 Jun 2001 21:44:07 +0300

57 lines

Re: Minimum requirements for final rinse in assembled boards

bbarr <[log in to unmask]>

Tue, 5 Jun 2001 15:56:05 -0400

88 lines

New Thread

Moisture Absorption & Plasma Desmear

Moisture Absorption & Plasma Desmear

Hans Hinners <[log in to unmask]>

Mon, 4 Jun 2001 14:04:56 -0700

40 lines

Re: Moisture Absorption & Plasma Desmear

Chuck Brummer <[log in to unmask]>

Mon, 4 Jun 2001 14:35:09 -0700

65 lines

Re: Moisture Absorption & Plasma Desmear

Hans Hinners <[log in to unmask]>

Mon, 4 Jun 2001 16:01:52 -0700

105 lines

New Thread

Moisture Barrier Bag WVTR

Re: Moisture Barrier Bag WVTR

Brian Ellis <[log in to unmask]>

Sat, 2 Jun 2001 16:40:48 +0300

56 lines

New Thread

Moisture Barrier Dry-Pack Requirements

Moisture Barrier Dry-Pack Requirements

Nancy Reynolds/MKT/HQ/KEMET/US <[log in to unmask]>

Thu, 7 Jun 2001 13:49:10 -0400

47 lines

New Thread

Moisture Sensitive Components

Re: Moisture Sensitive Components

Francois Monette <[log in to unmask]>

Fri, 1 Jun 2001 09:19:17 -0400

89 lines

Moisture Sensitive Components

Francois Monette <[log in to unmask]>

Fri, 1 Jun 2001 09:45:44 -0400

68 lines

New Thread

Multilayer Ceramic Chip Capacitors Quality

Multilayer Ceramic Chip Capacitors Quality

Nicole Landreville <[log in to unmask]>

Tue, 26 Jun 2001 11:36:41 -0400

40 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Genny Gibbard <[log in to unmask]>

Tue, 26 Jun 2001 10:08:06 -0600

75 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Frank Kimmey <[log in to unmask]>

Tue, 26 Jun 2001 09:13:51 -0700

79 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Creswick, Steven <[log in to unmask]>

Tue, 26 Jun 2001 13:02:27 -0400

97 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Nicole Landreville <[log in to unmask]>

Tue, 26 Jun 2001 13:10:07 -0400

100 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Guy Ramsey <[log in to unmask]>

Tue, 26 Jun 2001 13:05:45 -0400

81 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 26 Jun 2001 14:20:44 -0400

131 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Frank Kimmey <[log in to unmask]>

Tue, 26 Jun 2001 11:38:41 -0700

149 lines

Re: Multilayer Ceramic Chip Capacitors Quality

Craig Hillman <[log in to unmask]>

Wed, 27 Jun 2001 10:58:13 -0400

46 lines

New Thread

Multiple Thermal Stress

Multiple Thermal Stress

Shirley Xiao <[log in to unmask]>

Tue, 26 Jun 2001 17:22:30 -0700

35 lines

Re: Multiple Thermal Stress

Andrew Hoggan <[log in to unmask]>

Wed, 27 Jun 2001 09:13:15 +0100

79 lines

Multiple Thermal Stress

Joseph Ng <[log in to unmask]>

Wed, 27 Jun 2001 19:31:21 +0800

80 lines

Re: Multiple Thermal Stress

Brad Saunders <[log in to unmask]>

Wed, 27 Jun 2001 08:25:53 EDT

81 lines

Multiple Thermal Stress

Shirley Xiao <[log in to unmask]>

Thu, 28 Jun 2001 17:05:41 -0700

33 lines

New Thread

MultiUser Software

MultiUser Software

Safavi-Bayat,Shahed <[log in to unmask]>

Mon, 4 Jun 2001 08:42:17 -0400

83 lines

Re: MultiUser Software

Roland Jaquet <[log in to unmask]>

Mon, 4 Jun 2001 16:00:52 +0200

161 lines

New Thread

Need Sony CPD-1201/9000 monitor

Need Sony CPD-1201/9000 monitor

Vanderhoof, Brad <[log in to unmask]>

Fri, 22 Jun 2001 16:19:12 -0700

25 lines

Re: Need Sony CPD-1201/9000 monitor

bbarr <[log in to unmask]>

Mon, 25 Jun 2001 08:06:00 -0400

65 lines

New Thread

Nelco laminate

Nelco laminate

Rick Babyak <[log in to unmask]>

Mon, 18 Jun 2001 14:19:09 -0400

34 lines

New Thread

New Domain

New Domain

[log in to unmask]

Wed, 20 Jun 2001 08:03:26 -0500

35 lines

Re: New Domain

Bev Christian <[log in to unmask]>

Wed, 20 Jun 2001 10:03:00 -0400

68 lines

New Thread

New Domain - Red faced, AGAIN!

Re: New Domain - Red faced, AGAIN!

Bev Christian <[log in to unmask]>

Wed, 20 Jun 2001 10:05:00 -0400

79 lines

Re: New Domain - Red faced, AGAIN!

[log in to unmask]

Wed, 20 Jun 2001 09:08:20 -0500

34 lines

Re: New Domain - Red faced, AGAIN!

Joyce Koo <[log in to unmask]>

Wed, 20 Jun 2001 10:59:56 -0400

181 lines

New Thread

Ni thickness

Ni thickness

Gabriela Bogdan <[log in to unmask]>

Tue, 5 Jun 2001 00:10:39 +0300

26 lines

Re: Ni thickness

<Peter George Duncan> <[log in to unmask]>

Tue, 5 Jun 2001 10:41:57 +0800

77 lines

Re: Ni thickness

Gabriela Bogdan <[log in to unmask]>

Tue, 5 Jun 2001 09:07:43 +0300

91 lines

Re: Ni thickness

<Peter George Duncan> <[log in to unmask]>

Tue, 5 Jun 2001 15:17:45 +0800

161 lines

New Thread

No Clean and Rosin core on same PCB

No Clean and Rosin core on same PCB

Genny Gibbard <[log in to unmask]>

Mon, 18 Jun 2001 11:24:57 -0600

31 lines

Re: No Clean and Rosin core on same PCB

Mike Fenner <[log in to unmask]>

Tue, 19 Jun 2001 13:37:51 +0100

73 lines

Re: No Clean and Rosin core on same PCB

Ed Valentine <[log in to unmask]>

Tue, 19 Jun 2001 10:41:39 -0400

73 lines

Re: No Clean and Rosin core on same PCB

Steve Abrahamson <[log in to unmask]>

Tue, 19 Jun 2001 14:24:58 -0600

67 lines

Re: No Clean and Rosin core on same PCB

Genny Gibbard <[log in to unmask]>

Tue, 19 Jun 2001 14:32:04 -0600

82 lines

New Thread

Ok conformal coating, but how ?

Ok conformal coating, but how ?

Jorge Santana <[log in to unmask]>

Tue, 12 Jun 2001 11:43:23 -0500

51 lines

Re: Ok conformal coating, but how ?

Jon Moore <[log in to unmask]>

Tue, 12 Jun 2001 18:12:35 EDT

24 lines

Re: Ok conformal coating, but how ?

David Douthit <[log in to unmask]>

Tue, 12 Jun 2001 22:16:11 -0700

47 lines

Re: Ok conformal coating, but how ?

Marsico, James <[log in to unmask]>

Wed, 13 Jun 2001 07:01:08 -0400

61 lines

Re: Ok conformal coating, but how ?

Graham Naisbitt <[log in to unmask]>

Wed, 13 Jun 2001 15:32:39 +0100

103 lines

Re: Ok conformal coating, but how ?

Graham Naisbitt <[log in to unmask]>

Wed, 13 Jun 2001 15:32:42 +0100

108 lines

Ok conformal coating, but how ?

Susan James <[log in to unmask]>

Wed, 13 Jun 2001 10:28:26 -0500

128 lines

Re: Ok conformal coating, but how ?

Peter Swanson <[log in to unmask]>

Wed, 13 Jun 2001 16:52:52 +0100

45 lines

Re: Ok conformal coating, but how ?

David Douthit <[log in to unmask]>

Wed, 13 Jun 2001 22:49:37 -0700

211 lines

Re: Ok conformal coating, but how ?

Graham Naisbitt <[log in to unmask]>

Thu, 14 Jun 2001 10:46:08 +0100

92 lines

New Thread

Oxidized copper pad

Oxidized copper pad

PL <[log in to unmask]>

Wed, 6 Jun 2001 12:41:57 -0700

33 lines

Re: Oxidized copper pad

<Rudy Sedlak> <[log in to unmask]>

Wed, 6 Jun 2001 17:12:27 EDT

25 lines

New Thread

Package reliabilty...

Re: Package reliabilty...

Werner Engelmaier <[log in to unmask]>

Fri, 1 Jun 2001 10:19:27 EDT

41 lines

Re: Package reliabilty...

Ellsworth D. Berkowitz <[log in to unmask]>

Fri, 1 Jun 2001 15:45:29 -0500

106 lines

Re: Package reliabilty...

Ryan Grant <[log in to unmask]>

Mon, 4 Jun 2001 15:39:45 -0600

104 lines

Re: Package reliabilty...

Werner Engelmaier <[log in to unmask]>

Mon, 4 Jun 2001 18:04:08 EDT

49 lines

Re: Package reliabilty...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 5 Jun 2001 12:27:07 +0200

70 lines

Re: Package reliabilty...

Werner Engelmaier <[log in to unmask]>

Tue, 5 Jun 2001 07:24:31 EDT

59 lines

Re: Package reliabilty...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 8 Jun 2001 15:11:07 +0200

70 lines

New Thread

Packaging Assistance...Bag & Tag

Packaging Assistance...Bag & Tag

Brian L. Guidi <[log in to unmask]>

Mon, 18 Jun 2001 15:41:52 -0400

59 lines

New Thread

PCB Finish with Mirco-BGA's

PCB Finish with Mirco-BGA's

Bartkowaik Christine <[log in to unmask]>

Fri, 29 Jun 2001 07:01:50 -0400

25 lines

New Thread

PCB's with Micro BGA's.

PCB's with Micro BGA's.

Bartkowaik Christine <[log in to unmask]>

Wed, 27 Jun 2001 14:57:16 -0400

26 lines

New Thread

Permanent Moisture Sensitivity Indicators?

Re: Permanent Moisture Sensitivity Indicators?

Stephen R. Gregory <[log in to unmask]>

Thu, 7 Jun 2001 14:11:20 EDT

69 lines

New Thread

PGL-7 Vs Image Master film

PGL-7 Vs Image Master film

Steve Underwood <[log in to unmask]>

Tue, 5 Jun 2001 17:03:37 -0400

50 lines

PGL-7 Vs Image Master film

Steve Underwood <[log in to unmask]>

Thu, 7 Jun 2001 09:46:37 -0400

51 lines

New Thread

Process Validation

Process Validation

Phil Nutting <[log in to unmask]>

Fri, 22 Jun 2001 13:01:30 -0400

47 lines

Re: Process Validation

Guy Ramsey <[log in to unmask]>

Fri, 22 Jun 2001 13:13:35 -0400

94 lines

Re: Process Validation

Richard Hamilton <[log in to unmask]>

Fri, 22 Jun 2001 10:42:04 -0700

110 lines

Re: Process Validation

Kathy Kuhlow <[log in to unmask]>

Fri, 22 Jun 2001 12:43:45 -0500

118 lines

Re: Process Validation

Chuck Brummer <[log in to unmask]>

Fri, 22 Jun 2001 10:49:47 -0700

74 lines

Re: Process Validation

Roger M. Stoops <[log in to unmask]>

Fri, 22 Jun 2001 14:07:51 -0400

146 lines

Re: Process Validation

Kathy Kuhlow <[log in to unmask]>

Fri, 22 Jun 2001 13:31:26 -0500

55 lines

Re: Process Validation

Richard Hamilton <[log in to unmask]>

Fri, 22 Jun 2001 11:50:22 -0700

42 lines

New Thread

QA Note

QA Note

Rick Howieson <[log in to unmask]>

Wed, 20 Jun 2001 09:35:08 -0600

26 lines

Re: QA Note

Lou Hart <[log in to unmask]>

Wed, 20 Jun 2001 11:58:42 -0400

53 lines

Re: QA Note

[log in to unmask]

Wed, 20 Jun 2001 11:06:54 -0500

30 lines

Re: QA Note

May William D (Dean) CNIN <[log in to unmask]>

Wed, 20 Jun 2001 11:26:14 -0500

92 lines

Re: QA Note

Rick Howieson <[log in to unmask]>

Wed, 20 Jun 2001 10:31:23 -0600

104 lines

Re: QA Note

Dieselberg, Ron <[log in to unmask]>

Wed, 20 Jun 2001 12:53:58 -0400

66 lines

Re: QA Note

Timothy Reeves <[log in to unmask]>

Wed, 20 Jun 2001 14:10:37 -0700

38 lines

New Thread

RCA Microemulator

RCA Microemulator

Ed Popielarski <[log in to unmask]>

Fri, 22 Jun 2001 12:02:02 -0700

81 lines

New Thread

Re [TN]: PCB Material

Re [TN]: PCB Material

Hollandsworth, Ron <[log in to unmask]>

Wed, 27 Jun 2001 14:08:41 -0500

24 lines

Re: Re [TN]: PCB Material

Joseph Keary <[log in to unmask]>

Thu, 28 Jun 2001 09:50:06 -0700

59 lines

New Thread

RE [TN}: Correction In-Line Cleaner

RE [TN}: Correction In-Line Cleaner

Hollandsworth, Ron <[log in to unmask]>

Wed, 27 Jun 2001 14:05:55 -0500

30 lines

New Thread

Rod Smith/Endicott/IBM is out of the office.

Rod Smith/Endicott/IBM is out of the office.

Rod Smith <[log in to unmask]>

Sat, 30 Jun 2001 11:49:15 -0400

23 lines

New Thread

Screen printing

Screen printing

Tony Steinke <[log in to unmask]>

Mon, 18 Jun 2001 13:58:38 -0400

67 lines

New Thread

Semiconductor Experts

Semiconductor Experts

Earl Moon <[log in to unmask]>

Wed, 13 Jun 2001 04:32:36 -0500

36 lines

Re: Semiconductor Experts

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 13 Jun 2001 08:55:32 -0400

68 lines

Re: Semiconductor Experts

Mike Fenner <[log in to unmask]>

Wed, 13 Jun 2001 14:15:48 +0100

79 lines

New Thread

Separation Guidelines For PCB Traces Running Under Components

Separation Guidelines For PCB Traces Running Under Components

Riling, James J <[log in to unmask]>

Thu, 7 Jun 2001 15:09:01 -0400

36 lines

Re: Separation Guidelines For PCB Traces Running Under Components

Charles Lawson <[log in to unmask]>

Fri, 8 Jun 2001 08:22:32 -0400

57 lines

New Thread

Shelf life of non-component materials

Shelf life of non-component materials

Phil Nutting <[log in to unmask]>

Wed, 20 Jun 2001 11:00:28 -0400

26 lines

Re: Shelf life of non-component materials

Lou Hart <[log in to unmask]>

Wed, 20 Jun 2001 12:03:38 -0400

55 lines

Re: Shelf life of non-component materials

Dieselberg, Ron <[log in to unmask]>

Wed, 20 Jun 2001 12:30:54 -0400

69 lines

Re: Shelf life of non-component materials

Marsico, James <[log in to unmask]>

Wed, 20 Jun 2001 12:48:43 -0400

76 lines

New Thread

Silicon Conformal Coatings

Silicon Conformal Coatings

Stephen S. Schiera <[log in to unmask]>

Thu, 14 Jun 2001 17:52:20 -0500

31 lines

Re: Silicon Conformal Coatings

Brian Ellis <[log in to unmask]>

Fri, 15 Jun 2001 11:32:43 +0300

114 lines

Re: Silicon Conformal Coatings

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 15 Jun 2001 11:37:42 +0200

143 lines

Re: Silicon Conformal Coatings

Jon Moore <[log in to unmask]>

Fri, 15 Jun 2001 11:15:40 EDT

28 lines

Re: Silicon Conformal Coatings

Graham Naisbitt <[log in to unmask]>

Fri, 15 Jun 2001 18:49:54 +0100

86 lines

New Thread

SMT adhesive

SMT adhesive

Mengers, William D. <[log in to unmask]>

Tue, 19 Jun 2001 09:03:26 -0400

46 lines

Re: SMT adhesive

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 19 Jun 2001 09:56:44 -0400

84 lines

Re: SMT adhesive

Mengers, William D. <[log in to unmask]>

Tue, 19 Jun 2001 11:40:43 -0400

129 lines

Re: SMT adhesive

Peter Swanson <[log in to unmask]>

Tue, 19 Jun 2001 17:00:33 +0100

96 lines

Re: SMT adhesive

Steve Abrahamson <[log in to unmask]>

Tue, 19 Jun 2001 14:14:23 -0600

90 lines

New Thread

SMT Glue Dispense

SMT Glue Dispense

Bill Davis <[log in to unmask]>

Fri, 22 Jun 2001 09:59:12 EDT

24 lines

Re: SMT Glue Dispense

Phil Nutting <[log in to unmask]>

Fri, 22 Jun 2001 10:13:22 -0400

55 lines

Re: SMT Glue Dispense

Eric Christison <[log in to unmask]>

Fri, 22 Jun 2001 09:36:41 -0500

43 lines

Re: SMT Glue Dispense

Kathy Kuhlow <[log in to unmask]>

Fri, 22 Jun 2001 09:37:56 -0500

44 lines

Re: SMT Glue Dispense

Mengers, William D. <[log in to unmask]>

Fri, 22 Jun 2001 11:00:18 -0400

64 lines

Re: SMT Glue Dispense

Jon Moore <[log in to unmask]>

Mon, 25 Jun 2001 11:34:35 EDT

26 lines

New Thread

SNEC mtg

SNEC mtg

Gary Ferrari <[log in to unmask]>

Mon, 18 Jun 2001 12:55:42 EDT

105 lines

New Thread

Solder Dross - So. Calif.??

Solder Dross - So. Calif.??

Rick Thompson <[log in to unmask]>

Tue, 19 Jun 2001 13:25:42 -0700

35 lines

New Thread

SOLDER FOIL

SOLDER FOIL

Marsico, James <[log in to unmask]>

Mon, 4 Jun 2001 15:05:44 -0400

28 lines

Re: SOLDER FOIL

<Rudy Sedlak> <[log in to unmask]>

Mon, 4 Jun 2001 15:38:53 EDT

35 lines

Re: SOLDER FOIL

Creswick, Steven <[log in to unmask]>

Mon, 4 Jun 2001 16:07:57 -0400

57 lines

Re: SOLDER FOIL

Marsico, James <[log in to unmask]>

Mon, 4 Jun 2001 16:20:07 -0400

103 lines

Re: SOLDER FOIL

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Jun 2001 16:21:29 EDT

93 lines

Re: SOLDER FOIL

<Peter George Duncan> <[log in to unmask]>

Tue, 5 Jun 2001 10:30:19 +0800

73 lines

New Thread

solder mask tables

solder mask tables

Michael Lester <[log in to unmask]>

Fri, 8 Jun 2001 18:00:38 EDT

46 lines

Re: solder mask tables

Barmuta, Mike <[log in to unmask]>

Fri, 8 Jun 2001 15:27:35 -0700

62 lines

Re: solder mask tables

gleason <[log in to unmask]>

Mon, 11 Jun 2001 10:32:25 -0700

109 lines

New Thread

Solder Paste Dispenser

Solder Paste Dispenser

Kevin Saillard <[log in to unmask]>

Thu, 21 Jun 2001 15:14:11 +1000

69 lines

Re: Solder Paste Dispenser

Jason Gregory <[log in to unmask]>

Thu, 21 Jun 2001 07:52:24 -0500

48 lines

Re: Solder Paste Dispenser

Jason Gregory <[log in to unmask]>

Thu, 21 Jun 2001 08:22:52 -0500

47 lines

New Thread

Solder Technology International Webpage

Re: Solder Technology International Webpage

Neda Thrash <[log in to unmask]>

Tue, 5 Jun 2001 16:05:07 -0500

58 lines

New Thread

Solderability shelf life

Solderability shelf life

Peter Smith <[log in to unmask]>

Wed, 20 Jun 2001 10:24:29 -0400

241 lines

New Thread

Soldering socket pin on BGA pads - reliable?

Soldering socket pin on BGA pads - reliable?

Gregg Klawson <[log in to unmask]>

Wed, 6 Jun 2001 10:44:04 -0400

44 lines

Re: Soldering socket pin on BGA pads - reliable?

Werner Engelmaier <[log in to unmask]>

Wed, 6 Jun 2001 17:16:25 EDT

32 lines

New Thread

Spacers

Spacers

Lou Hart <[log in to unmask]>

Wed, 20 Jun 2001 18:21:12 -0400

24 lines

Re: Spacers

Mike Di Giacomo <[log in to unmask]>

Wed, 20 Jun 2001 18:50:00 -0400

63 lines

Re: Spacers

Richard Hamilton <[log in to unmask]>

Wed, 20 Jun 2001 16:05:14 -0700

45 lines

Re: Spacers

Jack Crawford <[log in to unmask]>

Wed, 20 Jun 2001 18:13:49 -0500

88 lines

Re: Spacers

Kasprzak, Bill (sys) USX <[log in to unmask]>

Thu, 21 Jun 2001 07:37:09 -0400

65 lines

Re: Spacers

Phil Nutting <[log in to unmask]>

Thu, 21 Jun 2001 08:12:31 -0400

98 lines

Re: Spacers

Werner Engelmaier <[log in to unmask]>

Thu, 21 Jun 2001 09:34:50 EDT

33 lines

New Thread

Spacing between SMT components?

Spacing between SMT components?

Matthew Lamkin <[log in to unmask]>

Tue, 12 Jun 2001 10:23:08 +0100

70 lines

Re: Spacing between SMT components?

Galang, Jerry <[log in to unmask]>

Tue, 12 Jun 2001 09:29:54 -0700

89 lines

New Thread

SPC for PCB

Re: SPC for PCB

Sasha Miladinovic <[log in to unmask]>

Tue, 5 Jun 2001 07:45:43 -0500

27 lines

New Thread

Specs for components taping (polarity)

Specs for components taping (polarity)

Luca Amato <[log in to unmask]>

Wed, 20 Jun 2001 03:51:52 -0400

33 lines

New Thread

Steve's note about lead reporting

Steve's note about lead reporting

John Brewer <[log in to unmask]>

Wed, 20 Jun 2001 13:13:40 -0400

32 lines

New Thread

stitch bars on double-sided boards

stitch bars on double-sided boards

Brocious, Dave A <[log in to unmask]>

Wed, 20 Jun 2001 12:20:01 -0400

61 lines

Re: stitch bars on double-sided boards

Werner Engelmaier <[log in to unmask]>

Thu, 21 Jun 2001 09:34:51 EDT

34 lines

Re: stitch bars on double-sided boards

Werner Engelmaier <[log in to unmask]>

Fri, 22 Jun 2001 08:21:10 EDT

40 lines

Re: stitch bars on double-sided boards

Craig Hillman <[log in to unmask]>

Thu, 28 Jun 2001 10:14:06 -0400

67 lines

New Thread

Stress screening of bare PCBs

Stress screening of bare PCBs

Terry Exell <[log in to unmask]>

Mon, 11 Jun 2001 11:13:43 +0100

48 lines

Re: Stress screening of bare PCBs

Dwight Mattix <[log in to unmask]>

Mon, 11 Jun 2001 18:50:47 -0700

235 lines

Re: Stress screening of bare PCBs

Timothy Reeves <[log in to unmask]>

Tue, 12 Jun 2001 10:14:41 -0700

94 lines

New Thread

Sulfuric peroxide preplate microetch

Sulfuric peroxide preplate microetch

Phillip E. Hinton <[log in to unmask]>

Tue, 12 Jun 2001 11:55:03 EDT

30 lines

Re: Sulfuric peroxide preplate microetch

<Rudy Sedlak> <[log in to unmask]>

Tue, 12 Jun 2001 16:42:16 EDT

50 lines

Re: Sulfuric peroxide preplate microetch

Phillip E. Hinton <[log in to unmask]>

Tue, 12 Jun 2001 18:26:36 EDT

31 lines

Re: Sulfuric peroxide preplate microetch

Barmuta, Mike <[log in to unmask]>

Tue, 12 Jun 2001 15:54:05 -0700

99 lines

Re: Sulfuric peroxide preplate microetch

Ken Mc Gowan <[log in to unmask]>

Thu, 14 Jun 2001 13:27:12 -0100

95 lines

New Thread

Surface Mount Reverse/Back mount LED

Surface Mount Reverse/Back mount LED

Michael Forrester <[log in to unmask]>

Mon, 25 Jun 2001 17:44:36 -0400

29 lines

Re: Surface Mount Reverse/Back mount LED

Stephen R. Gregory <[log in to unmask]>

Tue, 26 Jun 2001 08:54:15 EDT

105 lines

Re: Surface Mount Reverse/Back mount LED

Tom B. <[log in to unmask]>

Tue, 26 Jun 2001 10:56:32 -0400

72 lines

Re: Surface Mount Reverse/Back mount LED

Paul Ziarek <[log in to unmask]>

Tue, 26 Jun 2001 10:49:31 -0500

106 lines

Re: Surface Mount Reverse/Back mount LED

Tom Burek <[log in to unmask]>

Tue, 26 Jun 2001 14:53:25 -0400

117 lines

New Thread

Symposium : July 16-21

Symposium : July 16-21

Stephannie Caliendo <[log in to unmask]>

Fri, 29 Jun 2001 16:28:08 -0500

60 lines

New Thread

Talcum powder on wires

Talcum powder on wires

Jason Larson, AScT <[log in to unmask]>

Wed, 6 Jun 2001 13:15:54 -0700

35 lines

Re: Talcum powder on wires

Douglas Pauls <[log in to unmask]>

Thu, 7 Jun 2001 07:25:45 -0500

36 lines

Re: Talcum powder on wires

<Peter George Duncan> <[log in to unmask]>

Fri, 8 Jun 2001 07:49:59 +0800

76 lines

New Thread

Tape and Reel Standards

Tape and Reel Standards

John Fahey <[log in to unmask]>

Tue, 26 Jun 2001 11:54:12 -0500

28 lines

New Thread

Test - please ignore

Test - please ignore

Clive ffitch <[log in to unmask]>

Tue, 12 Jun 2001 17:59:50 +0100

33 lines

New Thread

Thanks for the HOT tips

Thanks for the HOT tips

Graham Naisbitt <[log in to unmask]>

Tue, 26 Jun 2001 18:02:36 +0100

105 lines

Re: Thanks for the HOT tips

Peter Swanson <[log in to unmask]>

Wed, 27 Jun 2001 16:40:50 +0100

193 lines

New Thread

Thermal Relief

Thermal Relief

<Darrel Therriault> <[log in to unmask]>

Tue, 5 Jun 2001 13:57:27 -0700

68 lines

Re: Thermal Relief

Gary Ferrari <[log in to unmask]>

Tue, 5 Jun 2001 20:13:27 EDT

57 lines

New Thread

thermal-cycling guidelines

thermal-cycling guidelines

David Suraski <[log in to unmask]>

Tue, 26 Jun 2001 15:46:13 -0400

54 lines

Re: thermal-cycling guidelines

Craig Hillman <[log in to unmask]>

Wed, 27 Jun 2001 11:08:14 -0400

107 lines

Re: thermal-cycling guidelines

Jack Crawford <[log in to unmask]>

Wed, 27 Jun 2001 12:35:14 -0500

70 lines

New Thread

Thin Thermal Pad Materials

Thin Thermal Pad Materials

<Peter George Duncan> <[log in to unmask]>

Fri, 8 Jun 2001 10:32:30 +0800

40 lines

Re: Thin Thermal Pad Materials

Joyce Koo <[log in to unmask]>

Fri, 8 Jun 2001 08:24:07 -0400

80 lines

Re: Thin Thermal Pad Materials

Hann Pang <[log in to unmask]>

Fri, 8 Jun 2001 08:11:48 -0500

122 lines

Re: Thin Thermal Pad Materials

Marsico, James <[log in to unmask]>

Mon, 11 Jun 2001 08:46:30 -0400

89 lines

New Thread

Tips and Tricks

Tips and Tricks

D.Terstegge <[log in to unmask]>

Sun, 10 Jun 2001 11:22:55 +0200

44 lines

New Thread

TN] FW: dispensing glue

TN] FW: dispensing glue

John Brewer <[log in to unmask]>

Thu, 21 Jun 2001 11:56:26 -0400

32 lines

New Thread

TRI reporting...

TRI reporting...

Stephen R. Gregory <[log in to unmask]>

Tue, 19 Jun 2001 19:45:08 EDT

84 lines

Re: TRI reporting...

Vanderhoof, Brad <[log in to unmask]>

Tue, 19 Jun 2001 18:18:39 -0700

68 lines

Re: TRI reporting...

Ed Valentine <[log in to unmask]>

Tue, 19 Jun 2001 22:50:10 -0400

173 lines

Re: TRI reporting...

Stephen R. Gregory <[log in to unmask]>

Wed, 20 Jun 2001 00:00:46 EDT

65 lines

Re: TRI reporting...

Lee Whiteman <[log in to unmask]>

Wed, 20 Jun 2001 20:54:32 -0400

234 lines

Re: TRI reporting...

Phil Nutting <[log in to unmask]>

Wed, 20 Jun 2001 10:49:07 -0400

124 lines

Re: TRI reporting...

David Fish <[log in to unmask]>

Wed, 20 Jun 2001 18:54:48 -0700

150 lines

New Thread

UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Earl Moon <[log in to unmask]>

Tue, 5 Jun 2001 16:37:40 -0500

48 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Jun 2001 18:31:59 EDT

26 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Jun 2001 21:04:32 EDT

68 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Gabriela Bogdan <[log in to unmask]>

Wed, 6 Jun 2001 09:34:09 +0300

74 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 6 Jun 2001 09:14:29 +0200

90 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Matthew Lamkin <[log in to unmask]>

Wed, 6 Jun 2001 08:07:34 +0100

24 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Earl Moon <[log in to unmask]>

Wed, 6 Jun 2001 05:41:27 -0500

63 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Creswick, Steven <[log in to unmask]>

Wed, 6 Jun 2001 08:17:07 -0400

114 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Earl Moon <[log in to unmask]>

Thu, 7 Jun 2001 00:48:49 -0500

49 lines

Re: UGLY PHOTOS AND FAILURE ANALYSIS OPINIONS NEEDED

Earl Moon <[log in to unmask]>

Thu, 7 Jun 2001 05:38:41 -0500

35 lines

New Thread

Universal fixtures

Universal fixtures

Jason Gregory <[log in to unmask]>

Fri, 15 Jun 2001 07:42:26 -0500

35 lines

Re: Universal fixtures

gleason <[log in to unmask]>

Fri, 15 Jun 2001 08:37:06 -0700

67 lines

Re: Universal fixtures

Jon Moore <[log in to unmask]>

Fri, 15 Jun 2001 11:22:23 EDT

24 lines

Re: Universal fixtures

<Peter George Duncan> <[log in to unmask]>

Mon, 18 Jun 2001 10:11:34 +0800

83 lines

New Thread

Unusual Cleaning Operation- Help!

Re: Unusual Cleaning Operation- Help!

Dorothy M. Lush <[log in to unmask]>

Thu, 28 Jun 2001 20:21:35 -0500

19 lines

New Thread

Update on TRI Lead Rule

Re: Update on TRI Lead Rule

Jack Crawford <[log in to unmask]>

Wed, 20 Jun 2001 17:18:28 -0500

133 lines

New Thread

Vapor Phase Reflow

Re: Vapor Phase Reflow

Werner Engelmaier <[log in to unmask]>

Wed, 27 Jun 2001 22:39:11 EDT

43 lines

New Thread

voids in BGA

Re: voids in BGA

Werner Engelmaier <[log in to unmask]>

Wed, 6 Jun 2001 13:56:19 EDT

46 lines

New Thread

voids in BGA, but really reliability in general

voids in BGA, but really reliability in general

Steve Joy <[log in to unmask]>

Tue, 5 Jun 2001 09:09:53 -0700

41 lines

Re: voids in BGA, but really reliability in general

Craig Hillman <[log in to unmask]>

Fri, 8 Jun 2001 15:37:54 -0400

81 lines

Re: voids in BGA, but really reliability in general

Steve Joy <[log in to unmask]>

Thu, 21 Jun 2001 11:19:37 -0700

100 lines

Re: voids in BGA, but really reliability in general

Steve Joy <[log in to unmask]>

Thu, 21 Jun 2001 11:20:19 -0700

21 lines

Re: voids in BGA, but really reliability in general

Werner Engelmaier <[log in to unmask]>

Fri, 22 Jun 2001 08:21:12 EDT

31 lines

New Thread

Warp Vs laminate thickness variation in a panel

Warp Vs laminate thickness variation in a panel

Joseph Ng <[log in to unmask]>

Wed, 6 Jun 2001 00:27:53 -0500

33 lines

New Thread

WEIGHT GAIN TESTING

WEIGHT GAIN TESTING

Steffen, Don E <[log in to unmask]>

Thu, 28 Jun 2001 08:15:11 -0500

108 lines

New Thread

Which Solder Mask

Re: Which Solder Mask

Larry J. Fisher <[log in to unmask]>

Thu, 7 Jun 2001 21:12:50 EDT

105 lines

Re: Which Solder Mask

<Peter George Duncan> <[log in to unmask]>

Fri, 8 Jun 2001 12:59:50 +0800

107 lines

New Thread

X-ray Images

X-ray Images

Stephen R. Gregory <[log in to unmask]>

Wed, 13 Jun 2001 08:58:23 EDT

65 lines

Re: X-ray Images

Misner, Bruce <[log in to unmask]>

Wed, 13 Jun 2001 09:31:35 -0500

71 lines

Re: X-ray Images

Earl Moon <[log in to unmask]>

Wed, 13 Jun 2001 15:20:51 -0500

46 lines

Re: X-ray Images

David Douthit <[log in to unmask]>

Wed, 13 Jun 2001 19:00:07 -0700

78 lines

Re: X-ray Images

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 15 Jun 2001 10:20:17 +0200

121 lines

New Thread

[LF] FT Article

Re: [LF] FT Article

Brian Ellis <[log in to unmask]>

Mon, 11 Jun 2001 15:51:42 +0300

146 lines

Re: [LF] FT Article

Mike Fenner <[log in to unmask]>

Mon, 11 Jun 2001 16:39:23 +0100

195 lines

Re: [LF] FT Article

Ken Mc Gowan <[log in to unmask]>

Mon, 11 Jun 2001 17:03:00 -0100

202 lines

Re: [LF] FT Article

Brian Ellis <[log in to unmask]>

Tue, 12 Jun 2001 09:26:48 +0300

220 lines

New Thread

[TN} In-Line Cleaners

Re: [TN} In-Line Cleaners

Hollandsworth, Ron <[log in to unmask]>

Wed, 27 Jun 2001 13:57:30 -0500

28 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager