LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


April 2001


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

$850 2400 per (2 messages)
610 Change History (2 messages)
Acrylic coating and Fluorescence (3 messages)
Acrylics and Silicones (4 messages)
Aluminium Oxide Insulators (3 messages)
Antw: [TN] Best Value CCD camera (1 message)
Antw: [TN] Laboratory for tests on PCB (1 message)
AuSn soldering on Silver (5 messages)
Availability of IPC-4101 (2 messages)
AW: [TN] Loaded question...outsourcing vs. in-house manufacturing ... (1 message)
AW: [TN] Solder mask for touch up (1 message)
AW: [TN] Wave solder hold downs (2 messages)
Baking flexes prior to hot bar fixing (2 messages)
Best Value CCD camera (8 messages)
BGA crack- major headache (1 message)
Blind vias - cost differential (3 messages)
BOW AND TWIST (5 messages)
Caps shorting on bottom side ( another question ) (3 messages)
Caps shorting on bottom side after wave... (1 message)
Caps shorting on bottomside after wave... (16 messages)
Caps shorting...thanks everyone!! (3 messages)
Chip Component Misalignment (2 messages)
Cleaning test sockets (3 messages)
Comparative Tracking Index. (3 messages)
component orientation problems when in stick format (2 messages)
Compressed Air... (10 messages)
Connection of vias to planes (2 messages)
Copper Areas (1 message)
Current carrying capabilities of copper traces for pulsed current (2 messages)
Current carrying capabilities of copper traces for pulsedcurrent (1 message)
Current vs trace cross section ratio (1 message)
Deadlines (1 message)
Dispenser for dry powder (4 messages)
Dryfilm breakdown in Ammoniacal etch (5 messages)
ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al... (2 messages)
ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden (2 messages)
electrovert aquajet opinions please (1 message)
Embrittlement (12 messages)
emc simulation (2 messages)
ESD consequences (4 messages)
FET Failure Modes (1 message)
First Article Software (6 messages)
Flip Chip Sample Preparation for Cross Section (2 messages)
Flux Deposition (5 messages)
FR4 (2 messages)
FR4 Cost: 130Tg vs 170Tg (2 messages)
funky stuff on white tin (5 messages)
Fw: Anodising Al (3 messages)
Fw: Mail System Error - Returned Mail (1 message)
Fw: Reliability of exposed copper (5 messages)
Gerber editor (7 messages)
Hard Disk Drive Companies - Phils (1 message)
Help! (25 messages)
Help! Still on the road (2 messages)
High G PBAs (4 messages)
Humidity and temperature specification (3 messages)
Immersion silver boards tarnish (9 messages)
Improved SlkScreen requirements (5 messages)
Information on Immersion Tin PCB Surface Finish (2 messages)
Inkjet / Laser Marking system for printed circuit board recommendations (1 message)
Ionic Testing (1 message)
IPC Position Paper on Halogen-Free Electronics Available for Free Download (1 message)
IPC-A-600 : mealsing defect (2 messages)
IPC/DC Boston area meeting, 24-Apr 6pm (1 message)
ISO-9001:2000 documentation (3 messages)
Kelly Kovalovsky/Endicott/IBM is out of the office. (1 message)
Lab Wizard used in multiuser mode? (1 message)
Laboratory for tests on PCB (4 messages)
Lacing Tape (3 messages)
Loaded question...outsourcing vs. in-house manufacturing ... (11 messages)
Loaded question...outsourcing vs. in-house manufacturing... (7 messages)
looking for a us board vendor doing micro vias (1 message)
Looking For Assembly House (1 message)
Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch . (4 messages)
Looking for US board vendors doing microvias (3 messages)
Low Aspect Via definition (9 messages)
LTCC Suppliers, any ? (3 messages)
March 2001 Book-to-Bill Ratios... (1 message)
Masking Vias (7 messages)
Measure to prevent silver MSP tarnish (4 messages)
Melting Point of Steel (1 message)
Minimum spacing between two BGA solder joints? (8 messages)
Minimum Spacing For SMD (4 messages)
Moisture sensitivity (6 messages)
More on outsourcing... (5 messages)
My humble thanks... (1 message)
No technical content (2 messages)
No technical content...Bobby Hamilton.. (3 messages)
No Technical content...Marshmallow Easter Bunnies... (1 message)
No-Clean Residue (3 messages)
No-Clean Residue..... thanks (1 message)
Outsourcing/EMS (1 message)
P-CAD files for translation (1 message)
Package Characterization Labs (1 message)
Paste Thickness (3 messages)
Pasty Range (1 message)
PCB market size (area/weight v. $) (2 messages)
PCB Trace Resistance Chart (3 messages)
Planning For Compliance Witj Lead TRI (1 message)
Printed Wiring Boards Question (2 messages)
Process control for cleaning (4 messages)
Process for RF PCB on Al Plate? (1 message)
profiling (1 message)
Quest PCB: Is there anyone out there? (2 messages)
Random absence of soder joints (7 messages)
Random absence of solder joints (2 messages)
Random absence of solder joints - update (5 messages)
Rejected posting to [log in to unmask] (1 message)
Reliability of exposed copper (1 message)
resist lamination (1 message)
RF Assembly Issues (1 message)
saving orcad files (2 messages)
Shipping Damage on SMT components (5 messages)
Signoff Tech Net (1 message)
SIR Definition (10 messages)
SMEMA (3 messages)
SMT Pad Repair (1 message)
SMT Reel standards (2 messages)
SMT Rework Reliablity (3 messages)
SNEC meeting (1 message)
Solder mask for touch up (4 messages)
Solder Paste Vendor (2 messages)
Solder Peaks... (1 message)
Solvent for RTV738 (2 messages)
Standards for Engineering Documents (5 messages)
Surface Finish (1 message)
SV: [TN] Dryfilm breakdown in Ammoniacal etch (1 message)
TDR Tester for Differential Impedance Measurements (3 messages)
TechNet Digest - 29 Mar 2001 to 30 Mar 2001 - Special issue (#2001-193) (1 message)
telephone number request (2 messages)
Temperature Delta's During reflow (1 message)
The standard bit inspection spec (7 messages)
Tin (1 message)
TO-220 forming (2 messages)
Toroid winding (2 messages)
transition zone,Rigid area to flex area (2 messages)
Vias under BGA's - Tented or Not?? (7 messages)
Water Wash system justification (7 messages)
Wave solder hold downs (2 messages)
What companies can grind ceramic ferrule blanks (2 messages)
What is the recommended relative humidity for a electronic manufacturing facility? (1 message)
Who makes long life press pads (as press buffer)? (2 messages)
Yo? (3 messages)
[DC] Blind and Buried Vias (3 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

$850 2400 per

$850 2400 per

Charles E. McMahon <[log in to unmask]>

Fri, 20 Apr 2001 10:14:50 -0700

21 lines

Re: $850 2400 per

Jack Crawford <[log in to unmask]>

Fri, 20 Apr 2001 13:47:13 -0500

338 lines

New Thread

610 Change History

610 Change History

Marty Brooks <[log in to unmask]>

Thu, 19 Apr 2001 13:53:28 -0700

42 lines

Re: 610 Change History

Kathy Kuhlow <[log in to unmask]>

Thu, 19 Apr 2001 16:55:56 -0500

48 lines

New Thread

Acrylic coating and Fluorescence

Acrylic coating and Fluorescence

Douglas Pauls <[log in to unmask]>

Tue, 3 Apr 2001 09:25:18 -0500

34 lines

Re: Acrylic coating and Fluorescence

Brian Ellis <[log in to unmask]>

Tue, 3 Apr 2001 18:03:34 +0300

61 lines

Re: Acrylic coating and Fluorescence

Graham Naisbitt <[log in to unmask]>

Wed, 4 Apr 2001 09:15:56 +0100

84 lines

New Thread

Acrylics and Silicones

Acrylics and Silicones

Douglas Pauls <[log in to unmask]>

Tue, 3 Apr 2001 09:33:24 -0500

44 lines

Re: Acrylics and Silicones

Keith Calhoun <[log in to unmask]>

Tue, 3 Apr 2001 11:12:24 -0500

30 lines

Re: Acrylics and Silicones

Graham Naisbitt <[log in to unmask]>

Wed, 4 Apr 2001 09:16:01 +0100

94 lines

Re: Acrylics and Silicones

Michael Castro <[log in to unmask]>

Wed, 4 Apr 2001 02:59:19 -0700

156 lines

New Thread

Aluminium Oxide Insulators

Aluminium Oxide Insulators

Buscomb, Scott <[log in to unmask]>

Tue, 3 Apr 2001 17:29:54 -0600

28 lines

Re: Aluminium Oxide Insulators

Phil Nutting <[log in to unmask]>

Wed, 4 Apr 2001 13:22:03 -0400

64 lines

Re: Aluminium Oxide Insulators

Creswick, Steven <[log in to unmask]>

Wed, 4 Apr 2001 17:31:22 -0400

59 lines

New Thread

Antw: [TN] Best Value CCD camera

Antw: [TN] Best Value CCD camera

Guenter Grossmann <[log in to unmask]>

Fri, 27 Apr 2001 09:11:08 +0200

43 lines

New Thread

Antw: [TN] Laboratory for tests on PCB

Antw: [TN] Laboratory for tests on PCB

Guenter Grossmann <[log in to unmask]>

Thu, 12 Apr 2001 14:38:01 +0200

35 lines

New Thread

AuSn soldering on Silver

AuSn soldering on Silver

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 6 Apr 2001 12:42:50 +0200

34 lines

Re: AuSn soldering on Silver

Werner Engelmaier <[log in to unmask]>

Fri, 6 Apr 2001 07:43:56 EDT

36 lines

Re: AuSn soldering on Silver

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 6 Apr 2001 16:53:41 +0200

50 lines

Re: AuSn soldering on Silver

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 9 Apr 2001 15:31:58 +0200

50 lines

Re: AuSn soldering on Silver

Werner Engelmaier <[log in to unmask]>

Tue, 10 Apr 2001 22:17:23 EDT

30 lines

New Thread

Availability of IPC-4101

Availability of IPC-4101

James W. High <[log in to unmask]>

Wed, 4 Apr 2001 15:22:20 -0400

35 lines

Re: Availability of IPC-4101

Rick Howieson <[log in to unmask]>

Wed, 4 Apr 2001 13:37:47 -0600

60 lines

New Thread

AW: [TN] Loaded question...outsourcing vs. in-house manufacturing ...

AW: [TN] Loaded question...outsourcing vs. in-house manufacturing ...

Busko, Wolfgang <[log in to unmask]>

Tue, 24 Apr 2001 18:35:56 +0200

92 lines

New Thread

AW: [TN] Solder mask for touch up

AW: [TN] Solder mask for touch up

Busko, Wolfgang <[log in to unmask]>

Tue, 3 Apr 2001 18:03:10 +0200

76 lines

New Thread

AW: [TN] Wave solder hold downs

AW: [TN] Wave solder hold downs

Busko, Wolfgang <[log in to unmask]>

Wed, 11 Apr 2001 15:54:26 +0200

66 lines

AW: [TN] Wave solder hold downs

Busko, Wolfgang <[log in to unmask]>

Thu, 12 Apr 2001 09:38:28 +0200

65 lines

New Thread

Baking flexes prior to hot bar fixing

Baking flexes prior to hot bar fixing

Eric Christison <[log in to unmask]>

Mon, 16 Apr 2001 10:23:35 -0500

34 lines

Re: Baking flexes prior to hot bar fixing

Steve Kelly <[log in to unmask]>

Mon, 16 Apr 2001 11:51:25 -0400

61 lines

New Thread

Best Value CCD camera

Best Value CCD camera

Steve Joy <[log in to unmask]>

Thu, 26 Apr 2001 17:04:56 -0700

26 lines

Re: Best Value CCD camera

Smith Russell PO US <[log in to unmask]>

Fri, 27 Apr 2001 17:43:11 +0200

44 lines

Re: Best Value CCD camera

D.Terstegge <[log in to unmask]>

Sat, 28 Apr 2001 10:52:03 +0200

62 lines

Re: Best Value CCD camera

Eric Christison <[log in to unmask]>

Sat, 28 Apr 2001 05:21:09 -0500

108 lines

Re: Best Value CCD camera

Mike Fenner <[log in to unmask]>

Sat, 28 Apr 2001 10:30:28 +0100

87 lines

Re: Best Value CCD camera

Timothy Reeves <[log in to unmask]>

Mon, 30 Apr 2001 11:12:30 -0700

59 lines

Re: Best Value CCD camera

Ian Hanna <[log in to unmask]>

Mon, 30 Apr 2001 15:08:02 -0400

90 lines

Re: Best Value CCD camera

Darrel Therriault <[log in to unmask]>

Mon, 30 Apr 2001 14:12:44 -0700

303 lines

New Thread

BGA crack- major headache

Re: BGA crack- major headache

Bob Perkins <[log in to unmask]>

Mon, 9 Apr 2001 14:10:56 -0700

223 lines

New Thread

Blind vias - cost differential

Blind vias - cost differential

Ray Humphrey <[log in to unmask]>

Sun, 1 Apr 2001 10:49:12 -0700

50 lines

Re: Blind vias - cost differential

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 2 Apr 2001 16:02:15 -0400

82 lines

Re: Blind vias - cost differential

Ray Humphrey <[log in to unmask]>

Mon, 2 Apr 2001 20:58:27 -0700

63 lines

New Thread

BOW AND TWIST

BOW AND TWIST

[log in to unmask]

Wed, 4 Apr 2001 13:02:07 EDT

30 lines

Re: BOW AND TWIST

Shawn Murphy <[log in to unmask]>

Wed, 4 Apr 2001 10:21:19 -0700

68 lines

Re: BOW AND TWIST

Paul Peltier <[log in to unmask]>

Wed, 4 Apr 2001 03:02:07 -0400

59 lines

Re: BOW AND TWIST

Berg, John <[log in to unmask]>

Fri, 6 Apr 2001 15:36:11 -0500

68 lines

Bow and twist

Flatfield, Cadcam <[log in to unmask]>

Mon, 23 Apr 2001 16:24:02 +0200

90 lines

New Thread

Caps shorting on bottom side ( another question )

Caps shorting on bottom side ( another question )

Jorge Santana <[log in to unmask]>

Tue, 10 Apr 2001 16:34:46 -0500

27 lines

Re: Caps shorting on bottom side ( another question )

Michael Forrester <[log in to unmask]>

Wed, 11 Apr 2001 10:25:45 -0400

79 lines

Re: Caps shorting on bottom side ( another question )

Gregg Klawson <[log in to unmask]>

Wed, 11 Apr 2001 16:04:35 -0400

49 lines

New Thread

Caps shorting on bottom side after wave...

Re: Caps shorting on bottom side after wave...

Ken Patel <[log in to unmask]>

Tue, 10 Apr 2001 12:51:08 -0700

117 lines

New Thread

Caps shorting on bottomside after wave...

Caps shorting on bottomside after wave...

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Apr 2001 15:12:05 EDT

46 lines

Re: Caps shorting on bottomside after wave...

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 10 Apr 2001 15:31:14 -0400

78 lines

Re: Caps shorting on bottomside after wave...

gleason <[log in to unmask]>

Tue, 10 Apr 2001 14:34:52 -0700

83 lines

Re: Caps shorting on bottomside after wave...

Kathy Kuhlow <[log in to unmask]>

Tue, 10 Apr 2001 14:37:31 -0500

52 lines

Re: Caps shorting on bottomside after wave...

Douglas Pauls <[log in to unmask]>

Tue, 10 Apr 2001 14:41:55 -0500

38 lines

Re: Caps shorting on bottomside after wave...

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Tue, 10 Apr 2001 15:50:14 -0400

89 lines

Re: Caps shorting on bottomside after wave...

Bev Christian <[log in to unmask]>

Tue, 10 Apr 2001 16:06:52 -0400

67 lines

Re: Caps shorting on bottomside after wave...

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 10 Apr 2001 16:27:28 -0400

99 lines

Re: Caps shorting on bottomside after wave...

Shawn Murphy <[log in to unmask]>

Tue, 10 Apr 2001 13:32:21 -0700

98 lines

Re: Caps shorting on bottomside after wave...

Shawn Murphy <[log in to unmask]>

Tue, 10 Apr 2001 13:42:32 -0700

135 lines

Re: Caps shorting on bottomside after wave...

Tim Ramsey <[log in to unmask]>

Tue, 10 Apr 2001 13:50:36 -0700

159 lines

Re: Caps shorting on bottomside after wave...

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Apr 2001 17:00:43 EDT

46 lines

Re: Caps shorting on bottomside after wave...

Shawn Murphy <[log in to unmask]>

Tue, 10 Apr 2001 14:13:32 -0700

60 lines

Re: Caps shorting on bottomside after wave...

Crepeau, Phil <[log in to unmask]>

Wed, 11 Apr 2001 09:11:10 -0700

72 lines

Re: Caps shorting on bottomside after wave...

Pelkey, Glenn <[log in to unmask]>

Wed, 11 Apr 2001 09:50:36 -0700

54 lines

Re: Caps shorting on bottomside after wave...

Lou Hart <[log in to unmask]>

Wed, 11 Apr 2001 13:40:55 -0400

83 lines

New Thread

Caps shorting...thanks everyone!!

Caps shorting...thanks everyone!!

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Apr 2001 17:53:00 EDT

33 lines

Re: Caps shorting...thanks everyone!!

Ken Patel <[log in to unmask]>

Tue, 10 Apr 2001 15:01:02 -0700

65 lines

Re: Caps shorting...thanks everyone!!

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Apr 2001 19:16:01 EDT

37 lines

New Thread

Chip Component Misalignment

Chip Component Misalignment

Hooper Doug <[log in to unmask]>

Thu, 12 Apr 2001 14:36:00 -0400

35 lines

Re: Chip Component Misalignment

Kathy Kuhlow <[log in to unmask]>

Thu, 12 Apr 2001 15:30:58 -0500

46 lines

New Thread

Cleaning test sockets

Re: Cleaning test sockets

Douglas Pauls <[log in to unmask]>

Fri, 6 Apr 2001 08:08:20 -0500

47 lines

Re: Cleaning test sockets

<Rudy Sedlak> <[log in to unmask]>

Fri, 6 Apr 2001 09:51:56 EDT

29 lines

Re: Cleaning test sockets

Louis, Edwin @ CSE <[log in to unmask]>

Fri, 6 Apr 2001 15:55:50 -0400

53 lines

New Thread

Comparative Tracking Index.

Comparative Tracking Index.

tech <[log in to unmask]>

Thu, 5 Apr 2001 12:51:43 -0400

25 lines

Re: Comparative Tracking Index.

Geoff Layhe <[log in to unmask]>

Fri, 6 Apr 2001 09:15:18 +0100

74 lines

Re: Comparative Tracking Index.

Timothy Reeves <[log in to unmask]>

Fri, 6 Apr 2001 12:04:10 -0700

83 lines

New Thread

component orientation problems when in stick format

component orientation problems when in stick format

Tenison Stone <[log in to unmask]>

Wed, 25 Apr 2001 14:56:28 -0500

45 lines

Re: component orientation problems when in stick format

Larry Koens <[log in to unmask]>

Wed, 25 Apr 2001 15:36:06 -0500

81 lines

New Thread

Compressed Air...

Compressed Air...

Stephen R. Gregory <[log in to unmask]>

Fri, 20 Apr 2001 23:31:09 EDT

51 lines

Re: Compressed Air...

Brian Ellis <[log in to unmask]>

Sat, 21 Apr 2001 10:13:17 +0300

106 lines

Re: Compressed Air...

Rick Thompson <[log in to unmask]>

Sat, 21 Apr 2001 06:36:51 -0700

105 lines

Re: Compressed Air...

Jim Axton <[log in to unmask]>

Sat, 21 Apr 2001 10:40:52 -0700

111 lines

Re: Compressed Air...

Stephen R. Gregory <[log in to unmask]>

Sat, 21 Apr 2001 22:46:02 EDT

132 lines

Re: Compressed Air...

Brian Ellis <[log in to unmask]>

Sun, 22 Apr 2001 10:50:14 +0300

170 lines

Re: Compressed Air...

Mike Fenner <[log in to unmask]>

Sun, 22 Apr 2001 12:50:25 +0100

182 lines

Re: Compressed Air...

Phil Nutting <[log in to unmask]>

Mon, 23 Apr 2001 08:56:13 -0400

97 lines

Re: Compressed Air...

Chuck Brummer <[log in to unmask]>

Mon, 23 Apr 2001 08:23:10 -0700

144 lines

Re: Compressed Air...

Blomberg, Rainer (FL51) <[log in to unmask]>

Wed, 25 Apr 2001 09:28:38 -0400

102 lines

New Thread

Connection of vias to planes

Connection of vias to planes

Tempea, Ioan <[log in to unmask]>

Mon, 30 Apr 2001 09:34:01 -0400

33 lines

Re: Connection of vias to planes

Paul Fly <[log in to unmask]>

Mon, 30 Apr 2001 12:01:46 -0400

92 lines

New Thread

Copper Areas

Copper Areas

ANDERSON, Corky <[log in to unmask]>

Wed, 18 Apr 2001 15:25:01 -0700

33 lines

New Thread

Current carrying capabilities of copper traces for pulsed current

Current carrying capabilities of copper traces for pulsed current

May William D (Dean) CNIN <[log in to unmask]>

Thu, 26 Apr 2001 08:37:33 -0500

32 lines

Re: Current carrying capabilities of copper traces for pulsed current

Guy Ramsey <[log in to unmask]>

Thu, 26 Apr 2001 10:45:54 -0400

73 lines

New Thread

Current carrying capabilities of copper traces for pulsedcurrent

Re: Current carrying capabilities of copper traces for pulsedcurrent

Brian Ellis <[log in to unmask]>

Thu, 26 Apr 2001 18:53:37 +0300

109 lines

New Thread

Current vs trace cross section ratio

Current vs trace cross section ratio

Tamir Ben Shoshan <[log in to unmask]>

Thu, 12 Apr 2001 10:57:37 +0300

23 lines

New Thread

Deadlines

Deadlines

Stephannie Caliendo <[log in to unmask]>

Thu, 5 Apr 2001 14:49:47 -0500

187 lines

New Thread

Dispenser for dry powder

Dispenser for dry powder

Ken Fong <[log in to unmask]>

Tue, 3 Apr 2001 10:56:17 +0800

26 lines

Re: Dispenser for dry powder

Guy Ramsey <[log in to unmask]>

Tue, 3 Apr 2001 08:28:29 -0400

61 lines

Re: Dispenser for dry powder

Ken Fong <[log in to unmask]>

Wed, 4 Apr 2001 08:42:35 +0800

69 lines

Re: Dispenser for dry powder

Guy Ramsey <[log in to unmask]>

Wed, 4 Apr 2001 13:00:25 -0400

105 lines

New Thread

Dryfilm breakdown in Ammoniacal etch

Dryfilm breakdown in Ammoniacal etch

Eric Masters <[log in to unmask]>

Thu, 5 Apr 2001 13:10:02 EDT

62 lines

Re: Dryfilm breakdown in Ammoniacal etch

<Rudy Sedlak> <[log in to unmask]>

Thu, 5 Apr 2001 20:54:33 EDT

45 lines

Re: Dryfilm breakdown in Ammoniacal etch

Brian Ellis <[log in to unmask]>

Fri, 6 Apr 2001 11:45:16 +0300

54 lines

Re: Dryfilm breakdown in Ammoniacal etch

sean clinton <[log in to unmask]>

Fri, 6 Apr 2001 07:32:33 -0500

64 lines

Re: Dryfilm breakdown in Ammoniacal etch

Ken Mc Gowan <[log in to unmask]>

Sat, 7 Apr 2001 13:02:51 -0100

154 lines

New Thread

ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al...

Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al...

Phillip E. Hinton <[log in to unmask]>

Fri, 6 Apr 2001 12:24:42 EDT

37 lines

Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al...

<Rudy Sedlak> <[log in to unmask]>

Fri, 6 Apr 2001 13:37:01 EDT

27 lines

New Thread

ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden

ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden

Ken Patel <[log in to unmask]>

Thu, 5 Apr 2001 17:21:10 -0700

26 lines

Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 6 Apr 2001 10:54:22 -0400

53 lines

New Thread

electrovert aquajet opinions please

electrovert aquajet opinions please

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 18 Apr 2001 11:37:35 -0400

24 lines

New Thread

Embrittlement

Embrittlement

Bev Christian <[log in to unmask]>

Mon, 16 Apr 2001 09:33:58 -0400

34 lines

Re: Embrittlement

Werner Engelmaier <[log in to unmask]>

Mon, 16 Apr 2001 10:23:05 EDT

27 lines

Re: Embrittlement

David Hillman <[log in to unmask]>

Mon, 23 Apr 2001 11:54:03 -0500

81 lines

Re: Embrittlement

Wenger, George M (George) <[log in to unmask]>

Mon, 23 Apr 2001 13:45:50 -0400

122 lines

Re: Embrittlement

David Hillman <[log in to unmask]>

Mon, 23 Apr 2001 13:07:49 -0500

150 lines

Re: Embrittlement

Bev Christian <[log in to unmask]>

Mon, 23 Apr 2001 14:23:39 -0400

182 lines

Re: Embrittlement

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 24 Apr 2001 08:31:27 +0200

141 lines

Re: Embrittlement

<Peter George Duncan> <[log in to unmask]>

Tue, 24 Apr 2001 14:53:46 +0800

197 lines

Re: Embrittlement

Mike Fenner <[log in to unmask]>

Tue, 24 Apr 2001 08:02:32 +0100

211 lines

Re: Embrittlement

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 24 Apr 2001 11:16:27 +0200

222 lines

Re: Embrittlement

Mike Fenner <[log in to unmask]>

Tue, 24 Apr 2001 17:56:14 +0100

297 lines

Re: Embrittlement

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 25 Apr 2001 09:07:12 +0200

306 lines

New Thread

emc simulation

emc simulation

Joseph Keary <[log in to unmask]>

Tue, 10 Apr 2001 16:11:58 -0700

34 lines

Re: emc simulation

Ted Tontis <[log in to unmask]>

Wed, 11 Apr 2001 08:05:03 -0500

64 lines

New Thread

ESD consequences

ESD consequences

Bissonnette, Jean-Francois <[log in to unmask]>

Wed, 11 Apr 2001 08:10:54 -0400

80 lines

Re: ESD consequences

Stephen R. Gregory <[log in to unmask]>

Wed, 11 Apr 2001 08:59:57 EDT

40 lines

Re: ESD consequences

David Fish <[log in to unmask]>

Wed, 11 Apr 2001 10:23:28 -0700

606 lines

Re: ESD consequences

Christophe CROCOMBETTE <[log in to unmask]>

Wed, 11 Apr 2001 17:43:34 +0200

195 lines

New Thread

FET Failure Modes

FET Failure Modes

Chafin, Ken G. <[log in to unmask]>

Tue, 3 Apr 2001 15:29:43 -0400

29 lines

New Thread

First Article Software

First Article Software

Jason Gregory <[log in to unmask]>

Fri, 27 Apr 2001 10:23:52 -0500

35 lines

Re: First Article Software

Kathy Kuhlow <[log in to unmask]>

Fri, 27 Apr 2001 10:51:20 -0500

56 lines

Re: First Article Software

Jason Gregory <[log in to unmask]>

Fri, 27 Apr 2001 11:13:01 -0500

44 lines

Re: First Article Software

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 27 Apr 2001 13:21:43 -0400

20 lines

Re: First Article Software

D.Terstegge <[log in to unmask]>

Sun, 29 Apr 2001 22:23:00 +0200

78 lines

Re: First Article Software

<Peter George Duncan> <[log in to unmask]>

Mon, 30 Apr 2001 09:32:56 +0800

93 lines

New Thread

Flip Chip Sample Preparation for Cross Section

Flip Chip Sample Preparation for Cross Section

Pelkey, Glenn <[log in to unmask]>

Mon, 23 Apr 2001 11:29:59 -0700

35 lines

Re: Flip Chip Sample Preparation for Cross Section

David Hillman <[log in to unmask]>

Mon, 23 Apr 2001 16:09:26 -0500

84 lines

New Thread

Flux Deposition

Flux Deposition

Rougeux, Scott <[log in to unmask]>

Mon, 2 Apr 2001 14:27:50 -0500

26 lines

Re: Flux Deposition

Alan Kreplick <[log in to unmask]>

Mon, 2 Apr 2001 15:47:03 -0400

93 lines

Re: Flux Deposition

Hans Hinners <[log in to unmask]>

Mon, 2 Apr 2001 12:48:52 -0700

77 lines

Re: Flux Deposition

Samuel.Ares <[log in to unmask]>

Mon, 2 Apr 2001 15:51:00 -0400

74 lines

Re: Flux Deposition

Bev Christian <[log in to unmask]>

Mon, 2 Apr 2001 15:52:33 -0400

60 lines

New Thread

FR4

FR4

Dieselberg, Ron <[log in to unmask]>

Wed, 11 Apr 2001 11:23:13 -0400

30 lines

Re: FR4

Geoff Layhe <[log in to unmask]>

Wed, 11 Apr 2001 17:37:55 +0100

74 lines

New Thread

FR4 Cost: 130Tg vs 170Tg

FR4 Cost: 130Tg vs 170Tg

Buscomb, Scott <[log in to unmask]>

Mon, 30 Apr 2001 13:07:28 -0600

29 lines

Re: FR4 Cost: 130Tg vs 170Tg

John J Walker <[log in to unmask]>

Tue, 1 May 2001 04:48:11 -0400

27 lines

New Thread

funky stuff on white tin

funky stuff on white tin

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 9 Apr 2001 12:05:19 -0400

35 lines

Re: funky stuff on white tin

<Rudy Sedlak> <[log in to unmask]>

Mon, 9 Apr 2001 12:41:02 EDT

29 lines

Re: funky stuff on white tin

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 9 Apr 2001 13:08:34 -0400

55 lines

Re: funky stuff on white tin

[log in to unmask]

Mon, 9 Apr 2001 22:51:56 EDT

63 lines

Re: funky stuff on white tin

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 10 Apr 2001 09:33:36 -0400

49 lines

New Thread

Fw: Anodising Al

Fw: Anodising Al

Ken Mc Gowan <[log in to unmask]>

Thu, 26 Apr 2001 16:54:42 -0100

169 lines

Re: Fw: Anodising Al

<Rudy Sedlak> <[log in to unmask]>

Thu, 26 Apr 2001 21:14:23 EDT

27 lines

Re: Fw: Anodising Al

Brian Ellis <[log in to unmask]>

Fri, 27 Apr 2001 09:34:39 +0300

57 lines

New Thread

Fw: Mail System Error - Returned Mail

Fw: Mail System Error - Returned Mail

Ken Mc Gowan <[log in to unmask]>

Fri, 20 Apr 2001 22:39:12 -0100

46 lines

New Thread

Fw: Reliability of exposed copper

Fw: Reliability of exposed copper

Yehuda Weisz <[log in to unmask]>

Sat, 28 Apr 2001 00:03:30 +0200

117 lines

Re: Fw: Reliability of exposed copper

Stephen R. Gregory <[log in to unmask]>

Sun, 29 Apr 2001 13:09:55 EDT

70 lines

Re: Fw: Reliability of exposed copper

Yehuda Weisz <[log in to unmask]>

Mon, 30 Apr 2001 00:31:59 +0200

131 lines

Re: Fw: Reliability of exposed copper

Crepeau, Phil <[log in to unmask]>

Mon, 30 Apr 2001 16:24:06 -0700

153 lines

Re: Fw: Reliability of exposed copper

Stephen R. Gregory <[log in to unmask]>

Mon, 30 Apr 2001 21:56:18 EDT

110 lines

New Thread

Gerber editor

Gerber editor

Danny W. Harkins <[log in to unmask]>

Wed, 25 Apr 2001 10:35:24 -0400

44 lines

Re: Gerber editor

McMahan, Lisa E (FL51) <[log in to unmask]>

Wed, 25 Apr 2001 11:08:42 -0400

73 lines

Re: Gerber editor

Michael Kuczynski <[log in to unmask]>

Wed, 25 Apr 2001 10:05:33 -0500

36 lines

Re: Gerber editor

Mark Charlton <[log in to unmask]>

Wed, 25 Apr 2001 11:37:37 -0400

100 lines

Re: Gerber editor

d. terstegge <[log in to unmask]>

Wed, 25 Apr 2001 17:58:58 +0200

48 lines

Re: Gerber editor

<Peter George Duncan> <[log in to unmask]>

Thu, 26 Apr 2001 07:55:58 +0800

57 lines

Re: Gerber editor

½ðºè <[log in to unmask]>

Wed, 2 May 2001 19:42:43 +0800

69 lines

New Thread

Hard Disk Drive Companies - Phils

Hard Disk Drive Companies - Phils

Jay Bitanga <[log in to unmask]>

Thu, 5 Apr 2001 17:29:22 +0800

69 lines

New Thread

Help!

Help!

Werner Engelmaier <[log in to unmask]>

Thu, 5 Apr 2001 09:20:35 EDT

23 lines

Re: Help!

Rick Howieson <[log in to unmask]>

Thu, 5 Apr 2001 07:59:47 -0600

50 lines

Re: Help!

Torok Greg <[log in to unmask]>

Thu, 5 Apr 2001 09:57:22 -0400

56 lines

Re: Help!

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 5 Apr 2001 16:13:41 +0200

43 lines

Re: Help!

Brian Ellis <[log in to unmask]>

Thu, 5 Apr 2001 17:21:48 +0300

44 lines

Re: Help!

Julien Bouchard <[log in to unmask]>

Thu, 5 Apr 2001 10:20:27 -0400

51 lines

Re: Help!

Carroll, George <[log in to unmask]>

Thu, 5 Apr 2001 10:24:04 -0400

52 lines

Re: Help!

Sauer, Steven T. <[log in to unmask]>

Thu, 5 Apr 2001 10:24:09 -0400

35 lines

Re: Help!

Bev Christian <[log in to unmask]>

Thu, 5 Apr 2001 10:10:39 -0400

52 lines

Re: Help!

Bob Hawkins <[log in to unmask]>

Thu, 5 Apr 2001 09:33:14 -0500

52 lines

Re: Help!

Galang, Jerry <[log in to unmask]>

Thu, 5 Apr 2001 07:35:48 -0700

142 lines

Re: Help!

Phil Crepeau <[log in to unmask]>

Thu, 5 Apr 2001 07:41:59 -0700

54 lines

Re: Help!

Thorup, John <[log in to unmask]>

Thu, 5 Apr 2001 07:42:02 -0700

50 lines

Re: Help!

Werner Engelmaier <[log in to unmask]>

Thu, 5 Apr 2001 10:44:48 EDT

23 lines

Re: Help!

Jerry Mosur <[log in to unmask]>

Thu, 5 Apr 2001 10:21:00 -0400

51 lines

Re: Help!

Tom Taylor <[log in to unmask]>

Thu, 5 Apr 2001 10:55:55 -0400

36 lines

Re: Help!

Don Vischulis <[log in to unmask]>

Thu, 5 Apr 2001 09:38:32 -0600

45 lines

Re: Help!

Douglas Pauls <[log in to unmask]>

Thu, 5 Apr 2001 10:03:45 -0500

24 lines

Re: Help!

Jorge Santana <[log in to unmask]>

Thu, 5 Apr 2001 14:03:13 -0500

49 lines

Re: Help!

Ryan Grant <[log in to unmask]>

Thu, 5 Apr 2001 11:36:15 -0600

1909 lines

Re: Help!

David Fish <[log in to unmask]>

Thu, 5 Apr 2001 16:03:50 -0700

99 lines

Re: Help!

Douglas Pauls <[log in to unmask]>

Thu, 5 Apr 2001 15:45:23 -0500

21 lines

Re: Help!

Timothy Reeves <[log in to unmask]>

Thu, 5 Apr 2001 17:34:30 -0700

59 lines

Re: Help!

Michael Castro <[log in to unmask]>

Thu, 5 Apr 2001 23:45:18 -0700

67 lines

Re: Help!

Guy Ramsey <[log in to unmask]>

Fri, 6 Apr 2001 08:48:35 -0400

58 lines

New Thread

Help! Still on the road

Help! Still on the road

Werner Engelmaier <[log in to unmask]>

Sat, 14 Apr 2001 00:16:49 EDT

27 lines

Re: Help! Still on the road

David Fish <[log in to unmask]>

Mon, 16 Apr 2001 20:54:36 -0700

90 lines

New Thread

High G PBAs

High G PBAs

DUTTON Phil <[log in to unmask]>

Mon, 30 Apr 2001 17:50:11 +1000

50 lines

Re: High G PBAs

Eric Christison <[log in to unmask]>

Mon, 30 Apr 2001 03:00:27 -0500

69 lines

Re: High G PBAs

<Peter George Duncan> <[log in to unmask]>

Mon, 30 Apr 2001 16:28:55 +0800

147 lines

Re: High G PBAs

Brian Ellis <[log in to unmask]>

Mon, 30 Apr 2001 12:50:31 +0300

76 lines

New Thread

Humidity and temperature specification

Re: Humidity and temperature specification

Francis Sun <[log in to unmask]>

Thu, 12 Apr 2001 12:16:34 -0400

31 lines

Humidity and temperature specification

Francois Monette <[log in to unmask]>

Fri, 13 Apr 2001 08:11:01 -0400

65 lines

Re: Humidity and temperature specification

Jorge Santana <[log in to unmask]>

Mon, 16 Apr 2001 09:00:11 -0500

99 lines

New Thread

Immersion silver boards tarnish

Immersion silver boards tarnish

David <[log in to unmask]>

Mon, 9 Apr 2001 10:53:16 +0800

53 lines

Re: Immersion silver boards tarnish

Brian Ellis <[log in to unmask]>

Sun, 8 Apr 2001 18:42:03 +0300

40 lines

Re: Immersion silver boards tarnish

Ken Mc Gowan <[log in to unmask]>

Mon, 9 Apr 2001 13:49:18 -0100

108 lines

Re: Immersion silver boards tarnish

Lisa Angle <[log in to unmask]>

Mon, 9 Apr 2001 09:23:35 -0400

82 lines

Re: Immersion silver boards tarnish

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Mon, 9 Apr 2001 09:31:30 -0400

47 lines

Re: Immersion silver boards tarnish

David <[log in to unmask]>

Tue, 10 Apr 2001 12:25:58 +0800

74 lines

Re: Immersion silver boards tarnish

David <[log in to unmask]>

Tue, 10 Apr 2001 12:29:42 +0800

153 lines

Re: Immersion silver boards tarnish

<Rudy Sedlak> <[log in to unmask]>

Mon, 9 Apr 2001 12:42:52 EDT

32 lines

Re: Immersion silver boards tarnish

Brian Ellis <[log in to unmask]>

Mon, 9 Apr 2001 20:00:33 +0300

28 lines

New Thread

Improved SlkScreen requirements

Improved SlkScreen requirements

F.Pitzl <[log in to unmask]>

Thu, 19 Apr 2001 20:38:32 +0200

36 lines

Re: Improved SlkScreen requirements

John Parsons <[log in to unmask]>

Thu, 19 Apr 2001 11:53:30 -0700

53 lines

Re: Improved SlkScreen requirements

Tony Steinke <[log in to unmask]>

Thu, 19 Apr 2001 15:55:52 -0400

69 lines

Re: Improved SlkScreen requirements

Chuck Brummer <[log in to unmask]>

Fri, 20 Apr 2001 10:35:02 -0700

57 lines

Re: Improved SlkScreen requirements

Smith Russell PO US <[log in to unmask]>

Fri, 20 Apr 2001 21:24:42 +0200

32 lines

New Thread

Information on Immersion Tin PCB Surface Finish

Information on Immersion Tin PCB Surface Finish

Simon Howells <[log in to unmask]>

Wed, 4 Apr 2001 12:47:34 +1000

34 lines

Re: Information on Immersion Tin PCB Surface Finish

[log in to unmask]

Wed, 4 Apr 2001 14:02:41 EDT

28 lines

New Thread

Inkjet / Laser Marking system for printed circuit board recommendations

Re: Inkjet / Laser Marking system for printed circuit board recommendations

Francis Sun <[log in to unmask]>

Wed, 4 Apr 2001 09:13:17 -0400

35 lines

New Thread

Ionic Testing

Ionic Testing

Steve Challis <[log in to unmask]>

Mon, 30 Apr 2001 15:16:33 -0500

27 lines

New Thread

IPC Position Paper on Halogen-Free Electronics Available for Free Download

Re: IPC Position Paper on Halogen-Free Electronics Available for Free Download

Keach Sasamori <[log in to unmask]>

Wed, 11 Apr 2001 16:38:38 -0500

34 lines

New Thread

IPC-A-600 : mealsing defect

IPC-A-600 : mealsing defect

Lum Wee Mei <[log in to unmask]>

Tue, 24 Apr 2001 15:41:25 +0800

36 lines

Re: IPC-A-600 : mealsing defect

Guy Ramsey <[log in to unmask]>

Tue, 24 Apr 2001 07:52:08 -0400

76 lines

New Thread

IPC/DC Boston area meeting, 24-Apr 6pm

IPC/DC Boston area meeting, 24-Apr 6pm

Jeff Seeger <[log in to unmask]>

Tue, 17 Apr 2001 14:05:18 -0400

95 lines

New Thread

ISO-9001:2000 documentation

ISO-9001:2000 documentation

Phil Nutting <[log in to unmask]>

Tue, 24 Apr 2001 14:46:45 -0400

31 lines

Re: ISO-9001:2000 documentation

Earl Moon <[log in to unmask]>

Tue, 24 Apr 2001 15:01:47 -0400

61 lines

Re: ISO-9001:2000 documentation

Kari Rambo <[log in to unmask]>

Tue, 24 Apr 2001 14:20:13 -0500

54 lines

New Thread

Kelly Kovalovsky/Endicott/IBM is out of the office.

Kelly Kovalovsky/Endicott/IBM is out of the office.

Kelly Kovalovsky <[log in to unmask]>

Sat, 14 Apr 2001 01:39:22 -0400

23 lines

New Thread

Lab Wizard used in multiuser mode?

Lab Wizard used in multiuser mode?

Denis Dionne <[log in to unmask]>

Wed, 25 Apr 2001 11:56:45 -0400

32 lines

New Thread

Laboratory for tests on PCB

Laboratory for tests on PCB

Luca Amato <[log in to unmask]>

Thu, 12 Apr 2001 04:39:36 -0400

24 lines

Re: Laboratory for tests on PCB

Stephen Brown <[log in to unmask]>

Thu, 12 Apr 2001 10:12:08 +0100

47 lines

Re: Laboratory for tests on PCB

Geoff Layhe <[log in to unmask]>

Thu, 12 Apr 2001 10:38:00 +0100

74 lines

Re: Laboratory for tests on PCB

Lee Whiteman <[log in to unmask]>

Thu, 12 Apr 2001 22:57:14 -0400

73 lines

New Thread

Lacing Tape

Re: Lacing Tape

<Peter George Duncan> <[log in to unmask]>

Mon, 2 Apr 2001 07:54:12 +0800

100 lines

Re: Lacing Tape

Kasprzak, Bill (sys) USX <[log in to unmask]>

Mon, 2 Apr 2001 07:49:37 -0400

145 lines

Re: Lacing Tape

Dieselberg, Ron <[log in to unmask]>

Mon, 2 Apr 2001 13:48:13 -0400

69 lines

New Thread

Loaded question...outsourcing vs. in-house manufacturing ...

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Marsico, James <[log in to unmask]>

Tue, 24 Apr 2001 06:54:37 -0400

308 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Misner, Bruce <[log in to unmask]>

Tue, 24 Apr 2001 08:27:11 -0500

88 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Douglas Pauls <[log in to unmask]>

Tue, 24 Apr 2001 08:54:39 -0500

33 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Tue, 24 Apr 2001 17:39:59 +0200

357 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 24 Apr 2001 14:02:35 -0400

115 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

<Peter George Duncan> <[log in to unmask]>

Wed, 25 Apr 2001 08:28:26 +0800

105 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Stephen R. Gregory <[log in to unmask]>

Tue, 24 Apr 2001 21:15:39 EDT

94 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 25 Apr 2001 08:49:43 +0200

22 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Werner Engelmaier <[log in to unmask]>

Wed, 25 Apr 2001 07:24:39 EDT

25 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 25 Apr 2001 13:52:25 +0200

36 lines

Re: Loaded question...outsourcing vs. in-house manufacturing ...

Douglas Pauls <[log in to unmask]>

Wed, 25 Apr 2001 12:33:01 -0500

26 lines

New Thread

Loaded question...outsourcing vs. in-house manufacturing...

Loaded question...outsourcing vs. in-house manufacturing...

Stephen R. Gregory <[log in to unmask]>

Mon, 23 Apr 2001 20:25:13 EDT

47 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

Ed Valentine <[log in to unmask]>

Mon, 23 Apr 2001 21:36:30 -0400

125 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

<Peter George Duncan> <[log in to unmask]>

Tue, 24 Apr 2001 09:40:58 +0800

193 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

d. terstegge <[log in to unmask]>

Tue, 24 Apr 2001 14:36:06 +0200

380 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

Kathy Kuhlow <[log in to unmask]>

Tue, 24 Apr 2001 11:02:02 -0500

70 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

<Peter George Duncan> <[log in to unmask]>

Wed, 25 Apr 2001 08:56:12 +0800

135 lines

Re: Loaded question...outsourcing vs. in-house manufacturing...

Jason Gregory <[log in to unmask]>

Wed, 25 Apr 2001 09:36:27 -0500

84 lines

New Thread

looking for a us board vendor doing micro vias

looking for a us board vendor doing micro vias

Bill Dworak <[log in to unmask]>

Mon, 30 Apr 2001 21:03:54 -0700

42 lines

New Thread

Looking For Assembly House

Looking For Assembly House

Lam, Patrick <[log in to unmask]>

Fri, 27 Apr 2001 13:37:18 -0700

29 lines

New Thread

Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .

Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .

Ken Patel <[log in to unmask]>

Tue, 17 Apr 2001 19:28:44 -0700

28 lines

Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .

Stephen R. Gregory <[log in to unmask]>

Tue, 17 Apr 2001 23:16:32 EDT

42 lines

Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .

Pelkey, Glenn <[log in to unmask]>

Wed, 18 Apr 2001 08:49:51 -0700

69 lines

Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .

Ken Patel <[log in to unmask]>

Wed, 18 Apr 2001 14:58:36 -0700

97 lines

New Thread

Looking for US board vendors doing microvias

Looking for US board vendors doing microvias

Houston, Terri <[log in to unmask]>

Mon, 30 Apr 2001 08:47:20 -0500

30 lines

Re: Looking for US board vendors doing microvias

Don Wright <[log in to unmask]>

Mon, 30 Apr 2001 07:01:06 -0700

64 lines

Re: Looking for US board vendors doing microvias

Thomas Waznis <[log in to unmask]>

Mon, 30 Apr 2001 19:51:16 +0000

55 lines

New Thread

Low Aspect Via definition

Low Aspect Via definition

Michael Simms <[log in to unmask]>

Tue, 3 Apr 2001 08:33:57 -0500

30 lines

Re: Low Aspect Via definition

Guy Ramsey <[log in to unmask]>

Tue, 3 Apr 2001 10:21:07 -0400

78 lines

Re: Low Aspect Via definition

Ray Humphrey <[log in to unmask]>

Tue, 3 Apr 2001 07:38:05 -0700

88 lines

Re: Low Aspect Via definition

Ray Humphrey <[log in to unmask]>

Tue, 3 Apr 2001 08:01:20 -0700

106 lines

Re: Low Aspect Via definition

Gary McCauley <[log in to unmask]>

Tue, 3 Apr 2001 10:17:26 -0500

52 lines

Re: Low Aspect Via definition

Timothy Reeves <[log in to unmask]>

Tue, 3 Apr 2001 10:50:08 -0700

77 lines

Re: Low Aspect Via definition

Werner Engelmaier <[log in to unmask]>

Tue, 3 Apr 2001 16:59:02 EDT

48 lines

Re: Low Aspect Via definition

Werner Engelmaier <[log in to unmask]>

Wed, 4 Apr 2001 07:09:12 EDT

42 lines

Re: Low Aspect Via definition

Ray Humphrey <[log in to unmask]>

Wed, 4 Apr 2001 21:46:42 -0700

107 lines

New Thread

LTCC Suppliers, any ?

LTCC Suppliers, any ?

Goh Guan Chye <[log in to unmask]>

Thu, 12 Apr 2001 10:44:30 +0800

29 lines

Re: LTCC Suppliers, any ?

SL Chan <[log in to unmask]>

Thu, 12 Apr 2001 12:25:49 +0800

71 lines

Re: LTCC Suppliers, any ?

Creswick, Steven <[log in to unmask]>

Thu, 12 Apr 2001 12:05:11 -0400

58 lines

New Thread

March 2001 Book-to-Bill Ratios...

March 2001 Book-to-Bill Ratios...

Stephen R. Gregory <[log in to unmask]>

Fri, 27 Apr 2001 20:48:21 EDT

30 lines

New Thread

Masking Vias

Masking Vias

Jerry Mosur <[log in to unmask]>

Tue, 10 Apr 2001 10:03:09 -0400

28 lines

Re: Masking Vias

Stephen R. Gregory <[log in to unmask]>

Tue, 10 Apr 2001 10:32:25 EDT

39 lines

Re: Masking Vias

Shawn Murphy <[log in to unmask]>

Tue, 10 Apr 2001 07:42:13 -0700

69 lines

Re: Masking Vias

Steve Joy <[log in to unmask]>

Tue, 10 Apr 2001 07:37:30 -0700

35 lines

Re: Masking Vias

Ted Tontis <[log in to unmask]>

Tue, 10 Apr 2001 10:08:44 -0500

95 lines

Re: Masking Vias

d. terstegge <[log in to unmask]>

Tue, 10 Apr 2001 17:52:52 +0200

62 lines

Re: Masking Vias

<Peter George Duncan> <[log in to unmask]>

Thu, 12 Apr 2001 08:52:08 +0800

95 lines

New Thread

Measure to prevent silver MSP tarnish

Measure to prevent silver MSP tarnish

David <[log in to unmask]>

Thu, 12 Apr 2001 10:02:23 +0800

95 lines

Re: Measure to prevent silver MSP tarnish

Bev Christian <[log in to unmask]>

Wed, 11 Apr 2001 11:23:52 -0400

147 lines

Re: Measure to prevent silver MSP tarnish

Crepeau, Phil <[log in to unmask]>

Wed, 11 Apr 2001 11:23:47 -0700

170 lines

Re: Measure to prevent silver MSP tarnish

Douglas Pauls <[log in to unmask]>

Wed, 11 Apr 2001 14:31:19 -0500

32 lines

New Thread

Melting Point of Steel

Melting Point of Steel

Eric Christison <[log in to unmask]>

Thu, 5 Apr 2001 18:33:36 -0500

33 lines

New Thread

Minimum spacing between two BGA solder joints?

Minimum spacing between two BGA solder joints?

Alex L Chan <[log in to unmask]>

Thu, 12 Apr 2001 11:13:46 -0400

30 lines

Minimum spacing between two BGA solder joints?

Alex L Chan <[log in to unmask]>

Mon, 16 Apr 2001 10:30:40 -0400

31 lines

Re: Minimum spacing between two BGA solder joints?

Stephen R. Gregory <[log in to unmask]>

Mon, 16 Apr 2001 20:58:35 EDT

50 lines

Re: Minimum spacing between two BGA solder joints?

pratap <[log in to unmask]>

Mon, 16 Apr 2001 21:47:24 -0700

28 lines

Re: Minimum spacing between two BGA solder joints?

Alex L Chan <[log in to unmask]>

Tue, 17 Apr 2001 08:32:19 -0400

78 lines

Re: Minimum spacing between two BGA solder joints?

Shawn Murphy <[log in to unmask]>

Tue, 17 Apr 2001 06:03:26 -0700

137 lines

Re: Minimum spacing between two BGA solder joints?

Hann Pang <[log in to unmask]>

Tue, 17 Apr 2001 09:07:42 -0500

131 lines

Re: Minimum spacing between two BGA solder joints?

Jack Crawford <[log in to unmask]>

Tue, 17 Apr 2001 09:57:06 -0500

124 lines

New Thread

Minimum Spacing For SMD

Minimum Spacing For SMD

Lam, Patrick <[log in to unmask]>

Tue, 24 Apr 2001 09:25:58 -0700

31 lines

Re: Minimum Spacing For SMD

Earl Moon <[log in to unmask]>

Tue, 24 Apr 2001 15:15:27 -0400

61 lines

Re: Minimum Spacing For SMD

Smith-BCD, Richard <[log in to unmask]>

Tue, 24 Apr 2001 14:57:40 -0500

86 lines

Re: Minimum Spacing For SMD

<Peter George Duncan> <[log in to unmask]>

Wed, 25 Apr 2001 12:32:14 +0800

108 lines

New Thread

Moisture sensitivity

Moisture sensitivity

Hann Pang <[log in to unmask]>

Mon, 2 Apr 2001 12:01:50 -0500

32 lines

Re: Moisture sensitivity

Jorge Santana <[log in to unmask]>

Mon, 2 Apr 2001 12:21:34 -0500

65 lines

Re: Moisture sensitivity

Stephen R. Gregory <[log in to unmask]>

Mon, 2 Apr 2001 13:47:43 EDT

54 lines

Re: Moisture sensitivity

Cyker, Howard A (Howie) <[log in to unmask]>

Mon, 2 Apr 2001 14:06:45 -0400

69 lines

Re: Moisture sensitivity

Phil Zarrow <[log in to unmask]>

Mon, 2 Apr 2001 14:48:26 EDT

53 lines

Re: Moisture sensitivity

Creswick, Steven <[log in to unmask]>

Wed, 4 Apr 2001 17:21:32 -0400

65 lines

New Thread

More on outsourcing...

More on outsourcing...

Marsico, James <[log in to unmask]>

Tue, 24 Apr 2001 14:01:31 -0400

57 lines

Re: More on outsourcing...

Crepeau, Phil <[log in to unmask]>

Tue, 24 Apr 2001 11:30:26 -0700

31 lines

Re: More on outsourcing...

gleason <[log in to unmask]>

Tue, 24 Apr 2001 14:11:16 -0700

88 lines

Re: More on outsourcing...

Mike Fenner <[log in to unmask]>

Tue, 24 Apr 2001 20:18:32 +0100

87 lines

Re: More on outsourcing...

<Peter George Duncan> <[log in to unmask]>

Wed, 25 Apr 2001 14:16:55 +0800

206 lines

New Thread

My humble thanks...

My humble thanks...

Stephen R. Gregory <[log in to unmask]>

Tue, 24 Apr 2001 19:06:11 EDT

39 lines

New Thread

No technical content

No technical content

Stephen R. Gregory <[log in to unmask]>

Tue, 3 Apr 2001 20:24:23 EDT

66 lines

No technical content

Stephen R. Gregory <[log in to unmask]>

Tue, 3 Apr 2001 17:43:24 EDT

66 lines

New Thread

No technical content...Bobby Hamilton..

No technical content...Bobby Hamilton..

Stephen R. Gregory <[log in to unmask]>

Sun, 22 Apr 2001 16:17:13 EDT

26 lines

Re: No technical content...Bobby Hamilton..

Jeff Seeger <[log in to unmask]>

Sun, 22 Apr 2001 19:38:37 -0400

40 lines

Re: No technical content...Bobby Hamilton..

Stephen R. Gregory <[log in to unmask]>

Sun, 22 Apr 2001 20:24:53 EDT

45 lines

New Thread

No Technical content...Marshmallow Easter Bunnies...

No Technical content...Marshmallow Easter Bunnies...

Stephen R. Gregory <[log in to unmask]>

Fri, 13 Apr 2001 16:54:04 EDT

48 lines

New Thread

No-Clean Residue

No-Clean Residue

Paul Gill <[log in to unmask]>

Fri, 13 Apr 2001 09:34:07 -0700

35 lines

Re: No-Clean Residue

Brian Ellis <[log in to unmask]>

Fri, 13 Apr 2001 22:18:22 +0300

61 lines

Re: No-Clean Residue

Barmuta, Mike <[log in to unmask]>

Fri, 13 Apr 2001 14:49:33 -0700

97 lines

New Thread

No-Clean Residue..... thanks

Re: No-Clean Residue..... thanks

Paul Gill <[log in to unmask]>

Fri, 13 Apr 2001 17:57:17 -0700

28 lines

New Thread

Outsourcing/EMS

RE: Outsourcing/EMS

Hollandsworth, Ron <[log in to unmask]>

Wed, 25 Apr 2001 09:24:27 -0500

62 lines

New Thread

P-CAD files for translation

P-CAD files for translation

Steve Collins <[log in to unmask]>

Mon, 9 Apr 2001 08:43:08 -0600

26 lines

New Thread

Package Characterization Labs

Package Characterization Labs

LI YUAN <[log in to unmask]>

Thu, 12 Apr 2001 11:23:30 -0600

35 lines

New Thread

Paste Thickness

Paste Thickness

Rick Howieson <[log in to unmask]>

Wed, 18 Apr 2001 09:21:30 -0600

23 lines

Re: Paste Thickness

Stephen Brown <[log in to unmask]>

Wed, 18 Apr 2001 16:51:07 +0100

51 lines

Re: Paste Thickness

Ryan Grant <[log in to unmask]>

Thu, 19 Apr 2001 09:42:25 -0600

97 lines

New Thread

Pasty Range

Pasty Range

Jonathan A Noquil <[log in to unmask]>

Wed, 4 Apr 2001 18:09:26 +0800

29 lines

New Thread

PCB market size (area/weight v. $)

PCB market size (area/weight v. $)

David Whalley <[log in to unmask]>

Wed, 18 Apr 2001 15:53:55 +0200

60 lines

Re: PCB market size (area/weight v. $)

David Fish <[log in to unmask]>

Wed, 18 Apr 2001 22:43:36 -0700

91 lines

New Thread

PCB Trace Resistance Chart

PCB Trace Resistance Chart

Kaye Knotts <[log in to unmask]>

Tue, 10 Apr 2001 10:59:12 -0400

28 lines

Re: PCB Trace Resistance Chart

John Parsons <[log in to unmask]>

Tue, 10 Apr 2001 09:11:10 -0700

53 lines

Re: PCB Trace Resistance Chart

Anselmo, John <[log in to unmask]>

Tue, 10 Apr 2001 12:30:04 -0400

172 lines

New Thread

Planning For Compliance Witj Lead TRI

Planning For Compliance Witj Lead TRI

David Fish <[log in to unmask]>

Tue, 24 Apr 2001 15:15:13 -0700

81 lines

New Thread

Printed Wiring Boards Question

Printed Wiring Boards Question

Scott Duhamel <[log in to unmask]>

Tue, 24 Apr 2001 12:37:06 -0500

28 lines

Re: Printed Wiring Boards Question

[log in to unmask]

Tue, 24 Apr 2001 14:33:35 EDT

53 lines

New Thread

Process control for cleaning

Process control for cleaning

Lou Hart <[log in to unmask]>

Mon, 30 Apr 2001 13:35:03 -0400

36 lines

Re: Process control for cleaning

Scott Duhamel <[log in to unmask]>

Mon, 30 Apr 2001 13:45:54 -0400

74 lines

Re: Process control for cleaning

[log in to unmask]

Mon, 30 Apr 2001 14:01:14 EDT

47 lines

Re: Process control for cleaning

Graham Collins <[log in to unmask]>

Mon, 30 Apr 2001 14:10:11 -0400

59 lines

New Thread

Process for RF PCB on Al Plate?

Process for RF PCB on Al Plate?

lckang <[log in to unmask]>

Wed, 18 Apr 2001 13:13:32 +0800

26 lines

New Thread

profiling

profiling

Bogdan Gabi <[log in to unmask]>

Sun, 1 Apr 2001 13:31:27 +0200

63 lines

New Thread

Quest PCB: Is there anyone out there?

Quest PCB: Is there anyone out there?

Clive ffitch <[log in to unmask]>

Tue, 10 Apr 2001 10:11:17 +0100

50 lines

Re: Quest PCB: Is there anyone out there?

Seth Goodman <[log in to unmask]>

Wed, 11 Apr 2001 11:44:25 -0500

39 lines

New Thread

Random absence of soder joints

Random absence of soder joints

Tempea, Ioan <[log in to unmask]>

Wed, 4 Apr 2001 14:43:24 -0400

56 lines

Re: Random absence of soder joints

Shawn Murphy <[log in to unmask]>

Wed, 4 Apr 2001 12:12:07 -0700

95 lines

Re: Random absence of soder joints

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 4 Apr 2001 15:56:54 -0400

83 lines

Re: Random absence of soder joints

Tempea, Ioan <[log in to unmask]>

Wed, 4 Apr 2001 16:20:43 -0400

121 lines

Re: Random absence of soder joints

Shawn Murphy <[log in to unmask]>

Wed, 4 Apr 2001 13:43:14 -0700

161 lines

Re: Random absence of soder joints

Stephen R. Gregory <[log in to unmask]>

Wed, 4 Apr 2001 17:53:51 EDT

47 lines

Re: Random absence of soder joints

Thorup, John <[log in to unmask]>

Wed, 4 Apr 2001 16:00:31 -0700

87 lines

New Thread

Random absence of solder joints

Re: Random absence of solder joints

Wenger, George M (George) <[log in to unmask]>

Wed, 4 Apr 2001 18:48:14 -0400

122 lines

Re: Random absence of solder joints

Wenger, George M (George) <[log in to unmask]>

Fri, 6 Apr 2001 14:27:49 -0400

150 lines

New Thread

Random absence of solder joints - update

Random absence of solder joints - update

Tempea, Ioan <[log in to unmask]>

Fri, 6 Apr 2001 12:24:31 -0400

43 lines

Re: Random absence of solder joints - update

Bev Christian <[log in to unmask]>

Fri, 6 Apr 2001 12:41:15 -0400

78 lines

Re: Random absence of solder joints - update

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 6 Apr 2001 13:05:17 -0400

72 lines

Re: Random absence of solder joints - update

Tempea, Ioan <[log in to unmask]>

Fri, 6 Apr 2001 13:24:43 -0400

101 lines

Re: Random absence of solder joints - update

Bev Christian <[log in to unmask]>

Fri, 6 Apr 2001 14:01:03 -0400

141 lines

New Thread

Rejected posting to [log in to unmask]

Re: Rejected posting to [log in to unmask]

Isaacson, Lynn <[log in to unmask]>

Mon, 30 Apr 2001 19:27:15 -0700

35 lines

New Thread

Reliability of exposed copper

Reliability of exposed copper

Yehuda Weisz <[log in to unmask]>

Sun, 15 Apr 2001 21:26:46 +0200

80 lines

New Thread

resist lamination

resist lamination

Tony Steinke <[log in to unmask]>

Fri, 13 Apr 2001 13:23:44 -0400

61 lines

New Thread

RF Assembly Issues

Re: RF Assembly Issues

Sauer, Steven T. <[log in to unmask]>

Mon, 2 Apr 2001 07:51:50 -0400

54 lines

New Thread

saving orcad files

saving orcad files

Scott Rebman <[log in to unmask]>

Fri, 20 Apr 2001 14:57:32 -0700

22 lines

Re: saving orcad files

William Brown <[log in to unmask]>

Mon, 23 Apr 2001 12:10:41 -0400

68 lines

New Thread

Shipping Damage on SMT components

Shipping Damage on SMT components

Rich Lasko <[log in to unmask]>

Wed, 18 Apr 2001 08:40:38 -0500

52 lines

Re: Shipping Damage on SMT components

Neil Lockley <[log in to unmask]>

Wed, 18 Apr 2001 15:23:21 +0100

34 lines

Re: Shipping Damage on SMT components

Darrel Therriault <[log in to unmask]>

Wed, 18 Apr 2001 07:54:57 -0700

192 lines

Re: Shipping Damage on SMT components

Pelkey, Glenn <[log in to unmask]>

Wed, 18 Apr 2001 08:21:42 -0700

77 lines

Re: Shipping Damage on SMT components

Kelly M. Schriver <[log in to unmask]>

Wed, 18 Apr 2001 17:00:01 -0500

118 lines

New Thread

Signoff Tech Net

Signoff Tech Net

Brown Janice <[log in to unmask]>

Thu, 12 Apr 2001 08:29:37 -0400

19 lines

New Thread

SIR Definition

SIR Definition

Bev Christian <[log in to unmask]>

Fri, 27 Apr 2001 11:17:08 -0400

37 lines

Re: SIR Definition

Hans Shin <[log in to unmask]>

Fri, 27 Apr 2001 08:31:21 -0700

60 lines

Re: SIR Definition

Dave Kell <[log in to unmask]>

Fri, 27 Apr 2001 10:33:39 -0500

63 lines

Re: SIR Definition

Bev Christian <[log in to unmask]>

Fri, 27 Apr 2001 12:09:49 -0400

80 lines

Re: SIR Definition

Ed Cosper <[log in to unmask]>

Fri, 27 Apr 2001 12:05:08 -0400

82 lines

Re: SIR Definition

Bev Christian <[log in to unmask]>

Fri, 27 Apr 2001 12:31:57 -0400

122 lines

Re: SIR Definition

Brian Ellis <[log in to unmask]>

Fri, 27 Apr 2001 19:45:43 +0300

81 lines

Re: SIR Definition

Douglas Pauls <[log in to unmask]>

Fri, 27 Apr 2001 11:35:37 -0500

161 lines

Re: SIR Definition

Brian Ellis <[log in to unmask]>

Sat, 28 Apr 2001 10:54:32 +0300

163 lines

Re: SIR Definition

Ken Mc Gowan <[log in to unmask]>

Mon, 30 Apr 2001 23:29:20 -0100

216 lines

New Thread

SMEMA

SMEMA

Hamilton, Richard CLE 4454 <[log in to unmask]>

Tue, 3 Apr 2001 09:54:23 -0700

30 lines

Re: SMEMA

Anderson, Greg (IndSys, GEFanuc, NA) <[log in to unmask]>

Tue, 3 Apr 2001 13:20:28 -0400

167 lines

Re: SMEMA

Caldon W. Driscoll <[log in to unmask]>

Tue, 3 Apr 2001 13:32:38 -0400

77 lines

New Thread

SMT Pad Repair

SMT Pad Repair

Raul Cantero <[log in to unmask]>

Mon, 9 Apr 2001 09:36:33 -0500

26 lines

New Thread

SMT Reel standards

SMT Reel standards

Harkins, Danny [CSI/KNOX] <[log in to unmask]>

Mon, 2 Apr 2001 15:37:07 -0500

49 lines

Re: SMT Reel standards

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 2 Apr 2001 13:39:15 -0700

85 lines

New Thread

SMT Rework Reliablity

SMT Rework Reliablity

Bob Perkins <[log in to unmask]>

Mon, 9 Apr 2001 14:07:05 -0700

108 lines

Re: SMT Rework Reliablity

Kathy Kuhlow <[log in to unmask]>

Mon, 9 Apr 2001 16:35:56 -0500

58 lines

Re: SMT Rework Reliablity

Werner Engelmaier <[log in to unmask]>

Tue, 10 Apr 2001 22:17:25 EDT

35 lines

New Thread

SNEC meeting

SNEC meeting

Gary Ferrari <[log in to unmask]>

Mon, 9 Apr 2001 17:19:20 EDT

124 lines

New Thread

Solder mask for touch up

Solder mask for touch up

Julien Bouchard <[log in to unmask]>

Tue, 3 Apr 2001 11:46:56 -0400

32 lines

Re: Solder mask for touch up

Kathy Kuhlow <[log in to unmask]>

Tue, 3 Apr 2001 12:08:26 -0500

50 lines

Re: Solder mask for touch up

Dennis Fritz <[log in to unmask]>

Wed, 4 Apr 2001 00:51:55 EDT

47 lines

Re: Solder mask for touch up

JinSee Goh <[log in to unmask]>

Wed, 4 Apr 2001 15:29:26 +0800

206 lines

New Thread

Solder Paste Vendor

Solder Paste Vendor

Jonathan A Noquil <[log in to unmask]>

Wed, 4 Apr 2001 18:41:23 +0800

30 lines

Re: Solder Paste Vendor

Mike Fenner <[log in to unmask]>

Wed, 4 Apr 2001 22:31:12 +0100

45 lines

New Thread

Solder Peaks...

Solder Peaks...

Mike Di Giacomo <[log in to unmask]>

Mon, 30 Apr 2001 17:08:50 -0500

25 lines

New Thread

Solvent for RTV738

Re: Solvent for RTV738

<Peter George Duncan> <[log in to unmask]>

Tue, 3 Apr 2001 13:39:48 +0800

193 lines

Re: Solvent for RTV738

Bev Christian <[log in to unmask]>

Tue, 3 Apr 2001 08:32:57 -0400

218 lines

New Thread

Standards for Engineering Documents

Standards for Engineering Documents

Rich Lasko <[log in to unmask]>

Wed, 18 Apr 2001 11:24:05 -0500

34 lines

Re: Standards for Engineering Documents

Hiteshew, Michael <[log in to unmask]>

Wed, 18 Apr 2001 12:47:43 -0400

77 lines

Re: Standards for Engineering Documents

John Parsons <[log in to unmask]>

Wed, 18 Apr 2001 09:47:30 -0700

60 lines

Re: Standards for Engineering Documents

<Peter George Duncan> <[log in to unmask]>

Thu, 19 Apr 2001 08:13:34 +0800

97 lines

Re: Standards for Engineering Documents

DUTTON Phil <[log in to unmask]>

Thu, 19 Apr 2001 10:21:00 +1000

83 lines

New Thread

Surface Finish

Surface Finish

Mike Bailey <[log in to unmask]>

Mon, 9 Apr 2001 09:39:16 -0700

35 lines

New Thread

SV: [TN] Dryfilm breakdown in Ammoniacal etch

SV: [TN] Dryfilm breakdown in Ammoniacal etch

Franco Vezzoli <[log in to unmask]>

Fri, 6 Apr 2001 10:19:47 +0200

145 lines

New Thread

TDR Tester for Differential Impedance Measurements

TDR Tester for Differential Impedance Measurements

Brian Vascukynas <[log in to unmask]>

Thu, 5 Apr 2001 08:46:57 -0400

33 lines

Re: TDR Tester for Differential Impedance Measurements

John Parsons <[log in to unmask]>

Thu, 5 Apr 2001 07:48:02 -0700

49 lines

Re: TDR Tester for Differential Impedance Measurements

Eric Bogatin <[log in to unmask]>

Thu, 5 Apr 2001 09:57:25 -0500

97 lines

New Thread

TechNet Digest - 29 Mar 2001 to 30 Mar 2001 - Special issue (#2001-193)

Re: TechNet Digest - 29 Mar 2001 to 30 Mar 2001 - Special issue (#2001-193)

Jim Wertin <[log in to unmask]>

Tue, 3 Apr 2001 07:54:39 -0400

1132 lines

New Thread

telephone number request

telephone number request

Gerard O'Brien <[log in to unmask]>

Fri, 13 Apr 2001 10:09:15 -0400

23 lines

Re: telephone number request

David Fish <[log in to unmask]>

Mon, 16 Apr 2001 18:12:04 -0700

56 lines

New Thread

Temperature Delta's During reflow

Temperature Delta's During reflow

Shawn Murphy <[log in to unmask]>

Wed, 4 Apr 2001 08:12:01 -0700

46 lines

New Thread

The standard bit inspection spec

The standard bit inspection spec

Young Hwan Ju <[log in to unmask]>

Thu, 26 Apr 2001 15:08:10 +0900

26 lines

Re: The standard bit inspection spec

<Peter George Duncan> <[log in to unmask]>

Thu, 26 Apr 2001 15:56:59 +0800

86 lines

Re: The standard bit inspection spec

Young Hwan Ju <[log in to unmask]>

Thu, 26 Apr 2001 17:18:47 +0900

124 lines

Re: The standard bit inspection spec

<Peter George Duncan> <[log in to unmask]>

Thu, 26 Apr 2001 16:51:09 +0800

183 lines

Re: The standard bit inspection spec

Brian Ellis <[log in to unmask]>

Thu, 26 Apr 2001 12:25:58 +0300

50 lines

Re: The standard bit inspection spec

Ian Hanna <[log in to unmask]>

Thu, 26 Apr 2001 13:11:29 -0400

237 lines

Re: The standard bit inspection spec

Timothy Reeves <[log in to unmask]>

Thu, 26 Apr 2001 15:33:13 -0700

45 lines

New Thread

Tin

Tin

Ken Mc Gowan <[log in to unmask]>

Mon, 30 Apr 2001 16:34:39 -0100

57 lines

New Thread

TO-220 forming

TO-220 forming

Graham Collins <[log in to unmask]>

Fri, 6 Apr 2001 11:09:21 -0400

37 lines

Re: TO-220 forming

Stephen R. Gregory <[log in to unmask]>

Fri, 6 Apr 2001 12:07:03 EDT

60 lines

New Thread

Toroid winding

Toroid winding

Ken Fong <[log in to unmask]>

Thu, 5 Apr 2001 17:18:33 +0800

29 lines

Re: Toroid winding

Steve Kelly <[log in to unmask]>

Fri, 6 Apr 2001 12:07:51 -0400

59 lines

New Thread

transition zone,Rigid area to flex area

transition zone,Rigid area to flex area

Bruce Bryla <[log in to unmask]>

Tue, 17 Apr 2001 10:27:14 -0500

24 lines

Re: transition zone,Rigid area to flex area

Kathy Kuhlow <[log in to unmask]>

Tue, 17 Apr 2001 16:08:25 -0500

50 lines

New Thread

Vias under BGA's - Tented or Not??

Vias under BGA's - Tented or Not??

Rick Thompson <[log in to unmask]>

Thu, 19 Apr 2001 07:46:23 -0700

45 lines

Re: Vias under BGA's - Tented or Not??

Ted Tontis <[log in to unmask]>

Thu, 19 Apr 2001 10:26:04 -0500

73 lines

Re: Vias under BGA's - Tented or Not??

Hiteshew, Michael <[log in to unmask]>

Thu, 19 Apr 2001 13:08:31 -0400

68 lines

Re: Vias under BGA's - Tented or Not??

Paul Fly <[log in to unmask]>

Thu, 19 Apr 2001 13:55:48 -0400

135 lines

Re: Vias under BGA's - Tented or Not??

Ryan Grant <[log in to unmask]>

Thu, 19 Apr 2001 13:00:22 -0600

95 lines

Re: Vias under BGA's - Tented or Not??

Rick Thompson <[log in to unmask]>

Thu, 19 Apr 2001 12:03:54 -0700

176 lines

Re: Vias under BGA's - Tented or Not??

d. terstegge <[log in to unmask]>

Fri, 20 Apr 2001 10:16:21 +0200

80 lines

New Thread

Water Wash system justification

Re: Water Wash system justification

Michael Castro <[log in to unmask]>

Mon, 2 Apr 2001 01:16:37 -0700

143 lines

Re: Water Wash system justification

Sprowles, Jol <[log in to unmask]>

Mon, 2 Apr 2001 08:00:31 -0400

140 lines

Re: Water Wash system justification

Phil Nutting <[log in to unmask]>

Mon, 2 Apr 2001 09:09:12 -0400

33 lines

Re: Water Wash system justification

Sprowles, Jol <[log in to unmask]>

Mon, 2 Apr 2001 09:27:41 -0400

182 lines

Re: Water Wash system justification

Gary McCauley <[log in to unmask]>

Mon, 2 Apr 2001 09:07:46 -0500

56 lines

Re: Water Wash system justification

bbarr <[log in to unmask]>

Mon, 2 Apr 2001 10:54:48 -0400

82 lines

Re: Water Wash system justification

Phil Crepeau <[log in to unmask]>

Mon, 2 Apr 2001 08:12:13 -0700

103 lines

New Thread

Wave solder hold downs

Wave solder hold downs

Rougeux, Scott <[log in to unmask]>

Wed, 11 Apr 2001 08:42:55 -0500

27 lines

Re: Wave solder hold downs

gleason <[log in to unmask]>

Wed, 11 Apr 2001 09:22:39 -0700

57 lines

New Thread

What companies can grind ceramic ferrule blanks

What companies can grind ceramic ferrule blanks

Russell Epstein <[log in to unmask]>

Fri, 20 Apr 2001 14:26:18 -0500

32 lines

Re: What companies can grind ceramic ferrule blanks

Creswick, Steven <[log in to unmask]>

Mon, 23 Apr 2001 09:59:53 -0400

64 lines

New Thread

What is the recommended relative humidity for a electronic manufacturing facility?

What is the recommended relative humidity for a electronic manufacturing facility?

Francis Sun <[log in to unmask]>

Thu, 12 Apr 2001 09:16:09 -0400

30 lines

New Thread

Who makes long life press pads (as press buffer)?

Re: Who makes long life press pads (as press buffer)?

Michael Flett <[log in to unmask]>

Sun, 15 Apr 2001 06:29:25 -0500

54 lines

Re: Who makes long life press pads (as press buffer)?

Yehuda Weisz <[log in to unmask]>

Sun, 15 Apr 2001 21:32:41 +0200

104 lines

New Thread

Yo?

Yo?

Stephen R. Gregory <[log in to unmask]>

Tue, 3 Apr 2001 21:46:54 EDT

30 lines

Re: Yo?

Douglas Pauls <[log in to unmask]>

Wed, 4 Apr 2001 07:19:16 -0500

22 lines

Re: Yo?

Caldon W. Driscoll <[log in to unmask]>

Wed, 4 Apr 2001 08:52:45 -0400

72 lines

New Thread

[DC] Blind and Buried Vias

Re: [DC] Blind and Buried Vias

Olson, Jack <[log in to unmask]>

Tue, 3 Apr 2001 12:44:56 -0500

76 lines

Re: [DC] Blind and Buried Vias

Ray Humphrey <[log in to unmask]>

Wed, 4 Apr 2001 08:26:14 -0700

106 lines

Re: [DC] Blind and Buried Vias

Earl Moon <[log in to unmask]>

Wed, 4 Apr 2001 13:57:17 -0500

51 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager